LEIYON INTELLIGENCE TECHNOLOGY LYBX30 2.1CH Karaoke System User Manual LY BX30 Manual ENG

Download:
Mirror Download [FCC.gov]
Document ID	3478775
Application ID	l342hlEq9H6/GMCdfu3brg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.94kB (1686770 bits)
Date Submitted	2017-07-24 00:00:00
Date Available	2017-07-24 00:00:00
Creation Date	2017-07-06 12:00:19
Producing Software	Corel PDF Engine Version 18.0.0.448
Document Lastmod	2017-07-07 10:34:07
Document Title	LY-BX30 Manual-ENG.cdr
Document Creator	CorelDRAW X8
Document Author:	gc008

LY-BX30
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or Modifications not expressly approved by the party
responsible could void the user’s authority to operate this device.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with the FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
“The normal function of the product may be disturbed by strong
Electro-Magnetic Interference. If so, simply reset the product to
resume normal operation by following the instruction manual. In
case the function could not resume, please use the product in
other location.”
This symbol means that this unit is double insulated. An earth connection is
not required.
•
The appliance must be connected to a 110-240 volt 50/60Hz AC supply by
means of a three pin socket.
•
Unplug this apparatus during lightning storms or when unused for long
periods of time - to prevent damage to this product.
•
Opening or removing covers may expose you to dangerous voltages or other
hazards.
•
To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
•
Use suitable power sources - Plug the product into a suitable power source, as
described in the operating instructions or as marked on the product.
•
The supply voltage should be the same as that indicated in the technical
specifications and the appliance rating plate.
•
If the socket outlets in your home are not suitable for the plug supplied with
this unit check with a qualified electrician for replacement.
•
In order to disconnect the apparatus from the mains completely, switch off
the outlet and remove the mains plug completely.
•
Do not bend, stretch or pull the supply cable in order to avoid electric shock.
•
When installed, the power socket must be within easy reach.
Moisture and water
•
Do not use this apparatus near water or moisture.
•
Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in
a wet basement, near a swimming pool, or anywhere else that water or moisture is present.
•
•
Batteries shall not be exposed to excessive heat such as sun, fire or the like
To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
• Refer all servicing to qualified service personnel
• Servicing is required when the apparatus has been damaged in any way: such as liquid
has been spilled or objects have fallen into the apparatus; the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped
Extendible Carry handle
Tweeter speakers
Light effects
Woofer speaker
Specification
Rating
Supply voltage
110-240V~50/60Hz
Max. power consumption
60W
Speaker power
2 x 15W + 30W
FM
87.5-108 MHz
Bluetooth compatibility
EDR, A2DP, AVRCP
Bluetooth version
V3.0
Unit dimensions
380 x 300 x 245 mm
1
MIC 1
MIC 2
LINE
MIC VOL
ECHO
MICRO SD
BASS
TREBLE
19
18
17
SOURCE
10
/CH-
LIGHT
/CH+
16
11
15
12
14
13
1. MIC input volume level knob
12. Flashing Light
2/3. MIC 1/4” input socket
13. Remote control receiving
4. LINE-IN 3.5mm socket
14. LED display
5. TF card input slot
15. MASTER volume level knob
6. USB card input slot
16. NEXT track button
7. TREBLE control knob
17. PREVIOUS track button
8. BASS control knob
18. STANDBY button
9. SOURCE button
19. ECHO control knob
10.PLAY/ PAUSE button
11.LIGHT effect button
STANDBY
switch to standby mode.
Press to mute audio playback
Press to increase the
volume level
Skip to the next track
Skip to the previous track
Press for play,
and pause functions
ress to decrease the
volume level
Fast Rewind button
Fast Forward button
MODE
Press for Bluetooth mode
BT
Press to switch modes
PAIR
U/SD
Press to switch between
USB and SD card inputs
Press to unpair a
connected Bluetooth device
EQ
Press to switch EQ modes
Remote Control Use Ready
Receive window
Lithium Battery
CR2025
3V
Within approximately
8Meter(25 feet)
Note: Before first use, please put the insulation piece out,
the remote control can be normal use.
Insert the shaped plug into the mains socket on the rear of the unit.
2. Connect the mains plug to a wall outlet and switch on.
3. Set the POWER switch to the ‘1’ ON position. The LED display will illuminate.
4. Press the STANDBY button on the main unit or remote control to wake from standby.
Press the button on top of the handle and pull the handle
/CH-
/CH+
A C 11 0 ~ 2 4 0V
Switching input modes
Follow the below instructions to switch between Bluetooth, FM radio and LINE in input modes.
1. Press the SOURCE button on the main unit or remote repeatedly to cycle between
Bluetooth, FM radio and LINE in input modes.
2. Alternatively press the BT button on the remote for direct access to Bluetooth. And the
U/SD button to switch between USB and SD card inputs.
Line-in input connection
Follow the steps below to connect an external audio source (such as a smartphone) for
playback through the party speaker..
You will need a 3.5mm audio cable or a 3.5mm to RCA cable (not supplied) to connect
a device to the LINE IN input socket.
1. Connect one end of the 3.5mm audio
cable to the LINE IN input socket or
RCA sockets on top of the unit.
Connect the other end to an earphone or
line-out socket on the audio device
( such as a smartphone).
MIC 1
MIC 2
LINE
MIC VOL
ECHO
MICRO SD
BASS
TREBLE
2. Switch to LINE IN input.
pressing the MODE button on the main unit
or remote repeatedly until you see LINE
on the display.
3. Press PLAY on the audio device.
4. Adjust the volume to your desired level.
When connecting via the headphone output the volume of the mini system is affected
by the volume control on the player. Ensure that the audio source (such as an MP3
player) is set to about 70-80% to avoid distortion.
1. Press the MODE button on the main unit or remote until you reach the FM radio
mode. The display will show ‘Fn’ momentarily then change to an FM frequency.
2. Press the
button on the main unit or remote control to begin an auto scan of the
Fm band. Every station that is detected is saved to a preset location.
3. Use the
buttons to cycle between the saved station presets.
The position of the party speaker is important for a good FM reception. If you cannt
receive a station you know you should be able to; move the party speaker to a different
location and try the scan again.
Follow the steps below to connect a USB flash drive or SD card
and play mp3 files.
1. Insert a compatible USB flash drive or SD card into the USB
input socket or SD card input slot on top of the unit.
2. The device will be automatically detected and the first
track in folder 01 or the root of the USB/SD card will begin
playback automatically.
SD
MIC 2
LINE
ECHO
MICRO SD
BASS
3. To pause playback press the
button on the main unit
(11) or remote control during playback. To resume playback
press once more.
4. To skip to the next or previous track use the
buttons.
USB/ MP3 information
•
Do not remove the USB/SD card device during playback.
•
Max 999 tracks and 99 folders can be recognised
•
FAT 16, 32 formats only. Up to 64GB in size.
Press the LIGHT effect button to begin the light show.
2. Press the LIGHT button to change the lighting effect. Up to 8 preset styles.
3. The 9th press of the LIGHT button will turn off the light effect.
Mic connection
Follow the steps below to connect a microphone with a 1/4” jack plug.
1. Connect the 1/4” (6.3mm) plug to the MIC input on top of the unit.
2. Once connected the volume is adjusted with the MIC volume control knob .
3. The mic input also as an ECHO control. Rotate the ECHO control knob to adjust
the amount of echo on the mic output.
TREBLE
Connecting a Bluetooth device
When using the Bluetooth connection, you can listen to audio wirelessly from a Bluetooth
audio device (For example an MP3 player) within 10 metres of the Party Speaker unit.
1. When in Bluetooth mode you will see ‘bt’ appear on the display and the unit searches
for previously paired devices or becomes available for new connections (indicated by
the BT LED flashing)..
2. Enable Bluetooth on your audio device (For example a smartphone) and search for
available bluetooth connections. Select the ‘LY-BX30’ from the list. If you
are asked for a pass code enter ‘0000’. The BT LED will stop flashing once connected.
If you turn off either device before pairing is complete the process will need to be
repeated when powered ON again.
3. Once paired an audible sound is heard through the speakers.
Each time you switch the Party Speaker on and select BLUETOOTH mode the device
will automatically connect, unless you have un-paired the device on your bluetooth
audio device.
4. You can now begin playback from the audio device and the output will playback
through the Party Speaker.
5. When using a mobile phone as an audio source and you receive a phone call the
audio playback stops while you receive the call. When you hang up the audio is
restored.
The volume output is effected by the volume level on the audio source EG: Phone or
laptop, so make sure that is set to about 70-80% (not too loud to avoid distortion).
6. To un-pair (disconnect) a bluetooth device, press the PAIR button on the remote
control. The party speaker will now revert to search mode, and be available for new
connections.
Controlling a connected device
Once connected you can either use the controls on the audio device to begin playback,
skip tracks etc. Or you can use the control buttons on the unit/remote control.
1. The
button on the main unit or remote control when pressed will begin
playback of the selected track on the audio device. Press again to pause playback.
2. To skip to the next track press the
control.
button on the main unit or remote
3. To skip to the previous track press the
control.
button on the main unit or remote
All other general audio functions such as MUTE, BASS, TREBLE & VOLUME work as
described in this manual.
Rotate the VOLUME control dial clockwise or press the
control to increase the volume output.
button on the remote
2. Rotate the VOLUME control anti-clockwise or press the
button on the remote
control to decrease the volume output.
Mute function
Activating the mute function disables audio output from the speakers. Bluetooth, Radio
etc will remain playing while mute is activated.
1. Press the MUTE button on the remote control to silence audio playback.
2. Press again to resume audio output once more.
Bass / Treble adjustments
Using the bass and treble control knobs you can adjust the sound output.
Rotate each knob to increase or decrease the treble / bass level for the audio output.
Problem
No power
Reason(s)
Power cable not connected
to wall socket.
Solution(s)
Make sure the plug is
connected.
Power socket is not
switched on.
Switch the power on.
Volume is too low.
Increase the volume.
LINE IN/BT source
volume is too low.
Increase the output volume
of the LINE IN/BT source.
Microphone/Guitar input
volume is too low.
Increase the volume of
either mic or guitar input.
Sound is distorted
Volume is too high.
Reduce the volume.
Sound is distorted from
LINE IN input
LINE IN source
volume is too high.
of the LINE IN source.
The remote control is not
working
The battery is flat
Replace the remote control
battery
Bluetooth connection with
an android device does not
output sound.
Some older android builds
may have incompatabilty
issues.
Use the volume buttons on
the remote control only to
bypass the incompatability.
Unit switches off after 20
minutes of inactivity
Auto standby mode in
operation.
This unit is designed to
enter STANDBY mode
automatically after 20
MINUTES of inactivity.
No Sound
Reduce the output volume
Press the STANDBY button
to wake the unit.
10
Ready? Let’s begin...
Please read these instructions carefully. They contain important information which will
help you get the best from your product and ensure safe and correct installation and
operation.
If you require any further assistance, our technical experts are happy to help. For full
details, refer to the product support section at the end of these instructions.
Accessories
1. Party Speaker unit
2. Remote control
3. Mains cable
11


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : gc008
Create Date                     : 2017:07:06 12:00:19+08:00
Modify Date                     : 2017:07:07 10:34:07+08:00
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Creator                         : gc008
Title                           : LY-BX30 Manual-ENG.cdr
Creator Tool                    : CorelDRAW X8
Metadata Date                   : 2017:07:07 10:34:07+08:00
Thumbnail Width                 : 168
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 25187 bytes, use -b option to extract)
Producer                        : Corel PDF Engine Version 18.0.0.448
Document ID                     : uuid:e7d3fade-03b9-4372-8897-3ffa470c582a
Instance ID                     : uuid:4e934bf0-bf91-4248-83c3-c85efc82c9f1
Rendition Class                 : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 104.999965
Max Page Size H                 : 148.000096
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT
Font Family                     : Arial
Font Face                       : Regular
Font Type                       : Open Type
Font Version                    : Version 5.10
Font Composite                  : False
Font File Name                  : arial.ttf
Plate Names                     : Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 16

EXIF Metadata provided by EXIF.tools