LG Electronics USA 26LG40UA LCD TV/MONITOR User Manual 26LG40 UA manual 2
LG Electronics USA LCD TV/MONITOR 26LG40 UA manual 2
UserManual.wiki
>
LG Electronics USA
>
26LG40UA User Manual
>
User manual 2 of 2
Contents
1.
User manual 1 of 2
2.
User manual 2 of 2
User manual 2 of 2
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![APPENDIX124Command Reference ListAPPENDIXCOMMAND1 COMMAND219. Channel TuningDATA(Hexadecimal)COMMAND1 COMMAND2DATA(Hexadecimal)COMMAND1 COMMAND2DATA00(Hexadecimal)DATA01(Hexadecimal)DATA02(Hexadecimal)DATA03(Hexadecimal)DATA04(Hexadecimal)DATA05(Hexadecimal)physical major major low minor high minor low attributeprogram high program lowma01. Power k a 00 ~0102. Input Select x b (Gp.97)03. Aspect Ratio k c (Gp.97)04. Screen Mute k d 00 ~0105. Volume Mute k e 00 ~0106. Volume Control k f 00 ~6407. Contrast k g 00 ~6408. Brightness k h 00 ~6409. Color k i 00 ~6410. Tint k j 00 ~6411. Sharpness k k 00 ~6412. OSD Select k l 00 ~0113. Remote ControlLock ModeTransmission / Receiving ProtocolTransmission[Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] : You can adjust the set ID to choose desired TV IDnumber in Setup menu. Adjustment range is 1~99.When selecting Set ID ‘0’, every connected the TV iscontrolled. Set ID is indicated as decimal (1~99)onmenu and as Hexa decimal (0x0~0x63)on transmission/receiving protocol.[DATA] : To transmit the command data.Transmit the ‘FF’ data to read status of command.[Cr] : Carriage ReturnASCII code ‘0x0D’[ ] : ASCII code ‘space (0x20)’* In this model, TV will not send the status during the standby mode.OK AcknowledgementThe TV transmits ACK (acknowledgement) based on this for-mat when receiving normal data. At this time, if the data isdata read mode, it indicates present status data. If the data isdata write mode, it returns the data of the PC computer.* In this model, TV will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[OK] : Use the large character.Error AcknowledgementThe TV transmits ACK (acknowledgement) based on this for-mat when receiving abnormal data from non-viable functionsor communication errors.Data1: Illegal CodeData2: Not supported functionData3: Wait more time* In this model, TV will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[NG] : Use the large character[Command1][Command2][ ][Set ID][ ][Data][Cr][Command2][ ][Set ID][ ][OK][Data][x][Command2][ ][Set ID][ ][NG][Data][x]14. Treble k r 00 ~6415. Bass k s 00 ~6416. Balance k t 00 ~6417.Color Temperaturek u 00 ~0218. Auto Configuration j u (Gp.98)20. Channel Add/Del m b 00 ~0121 . K ey m c ( Gp.99)22. Backlight m g 00 ~6400 ~01k m](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-52.png)
![APPENDIX12501. Power (Command: k a)To control Power On/Off of the TV.Transmission [k][a][ ][Set ID][ ][Data][Cr]Data 00: Power Off Data 01: Power OnAcknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]* In a like manner, if other functions transmit ‘FF’ databased on this format, Acknowledgement data feedbackpresents status about each function.* Note: In this model, TV will send the Acknowledgeafter power on processing completion.There might be a time delay between command andacknowledge.02. Input Select (Command: x b)To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]Data 00: DTV (Antenna) Data 01: DTV (Cable)Data 10: Analog (Antenna) Data 11: Analog (Cable)Data 20: AV1 Data 21: AV2Data 40: Component 1 Data 41: Component 2Data 60: RGB-PC Data 90: HDMI1Data 91: HDMI2 Data 92: HDMI3Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]03. Aspect Ratio (Command: k c)To adjust the screen format.Transmission [k][c][ ][Set ID][ ][Data][Cr]Data 01: 4:3 05: Zoom 202: 16:9 06: Set by program04: Zoom 1 09: Just scanReservedAcknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]04. Screen Mute (Command: k d)To select screen mute on/off.Transmission [k][d][ ][Set ID][ ][Data][Cr]Data 00: Screen mute off (Picture on)Data 01: Screen mute on (Picture off)Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]05. Volume Mute (Command: k e)To control volume mute on/off.You can also adjust mute using the MUTE button onremote control.Transmission [k][e][ ][Set ID][ ][Data][Cr]Data 00: Volume mute on (Volume off)Data 01: Volume mute off (Volume on)Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]06. Volume Control (Command: k f)To adjust volume.You can also adjust volume with the volume buttons onremote control.Transmission [k][f][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]07. Contrast (Command: k g)To adjust screen contrast. You can also adjust contrast in the PICTURE menu.Transmission [k][g][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]08. Brightness (Command: k h)To adjust screen brightness.You can also adjust brightness in the PICTURE menu.Transmission [k][h][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]09. Color (Command: k i)To adjust screen color.You can also adjust color in the PICTURE menu.Transmission [k][i][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]10. Tint (Command: k j)To adjust screen tint.You can also adjust tint in the PICTURE menu.Transmission [k][j][ ][Set ID][ ][Data][Cr]Data Red: 00 ~Green: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]11. Sharpness (Command: k k)To adjust screen sharpness.You can also adjust sharpness in the PICTURE menu.Transmission [k][k][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-53.png)
![APPENDIX126APPENDIX12. OSD Select (Command: k l)To select OSD (On Screen Display) on/off.Transmission [k][l][ ][Set ID][ ][Data][Cr]Data 00: OSD off Data 01: OSD onAcknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]13. Remote Control Lock Mode (Command: k m)To lock the remote control and the front panel controlson the set.Transmission [k][m][ ][Set ID][ ][Data][Cr]Data 00: Lock off Data 01: Lock onAcknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]If you’re not using the remote control and front panelcontrols on the TV, use this mode. When main power ison/off, remote control lock is released.14. Treble (Command: k r)To adjust treble. You can also adjust treble in the AUDIO menu.Transmission [k][r][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown.Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]15 . Bass (Command: k s)To adjust bass.You can also adjust bass in the AUDIO menu.Transmission [k][s][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown.Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]16. Balance (Command: k t)To adjust balance.You can also adjust balance in the AUDIO menu.Transmission [k][t][ ][Set ID][ ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown.Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]17. Color Temperature (Command: k u)To adjust color temperature.You can also adjust color temperature in the PICTURE menu.Transmission [k][u][ ][Set ID][ ][Data][Cr]Data 00: Medium 01: Cool 02: WarmAcknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]18. Auto Configuration (Command: j u)To adjust picture position and minimize image shakingautomatically. Auto configuration only works in RGB-PCmode.Transmission [ j ][u][ ][Set ID][ ][Data][Cr]Data 01: To setAcknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]19. Channel Tuning (Command: m a)To tune channel to following physical/major/minor number.Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]Digital channels have a Physical, Major, and Minor channelnumber. The Physical number is the actual digital channelnumber, the Major is the number that the channel shouldbe mapped to, and the Minor is the sub-channel. Sincethe ATSC tuner automatically maps the channel to theMajor number, the Physical number is not required whensending a command.Data 00: Physical Channel NumberNTSC air: 02~45, NTSC cable: 01, 0E~7DATSC air: 01~45, ATSC cable: 01~87Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byteTwo bytes are available for the Major and Minor, nor-mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC.*Real data mapping 0 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)63 : Step 99 (SET ID 99)64 : Step 100](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-54.png)
![APPENDIX127Data5:The table above lists the binary code which must beconverted to Hexadecimal before sending. For example:The binary code to tune the sub source to an NTSCcable channel is “1000 0001”, which translates to “81”in Hex.* 7th bit : For which source do you want to change thechannel.* 6th bit: Use a two part or one part channel. Most casesjust use 0 since it’s ignored when using NTSC.* 5th bit: Use 0 with NTSC since it can only use the phys-ical channel number. Normally use 1 for ATSC since mosttimes it doesn’t matter what the physical number is.* 4th bit: Set to 0.* 3-0 bits: Choose signal type.* Tune Command Examples:1. Tune to the analog (NTSC) cable channel 35.Data 00 = Physical of 35 = 23Data 01 & 02 = No Major = 00 00Data 03 & 04 = No Minor = 00 00Data 05 = 0000 0001 in binary = 01Total = ma 00 23 00 00 00 00 012. Tune to the digital (ATSC) local channel 30-3.Data 00 = Don’t know Physical = 00Data 01 & 02 = Major is 30 = 00 1EData 03 & 04 = Minor is 3 = 00 03Data 05 = 0010 0010 in binary = 22Total = ma 00 00 00 1E 00 03 22Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01][Data02][Data03][Data04][x][a][ ][Set ID][ ][NG][Data00][x]20. Channel Add/Del (Command: m b)To add and delete the channels.Transmission [m][b][ ][Set ID][ ][Data][Cr]Data 00: Channel Delete Data 01: Channel AddAcknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]21. Key (Command: m c)To send IR remote key code.Transmission [m][c][ ][Set ID][ ][Data][Cr]Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]22. Backlight (Command: m g)To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]Data Min:00 ~Max:64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 98.Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]StepNTSC AirNTSC CableATSC AirATSC Cable_std ATSC Cable_hrcATSC Cable_ircATSC cable_autoReserved...Reserved100110011x1200001111x1300000000x14xxxxxxxxxxReserved501UseNo UseUsing PhysicalChannel601TwoOneTwo/One Part Channel701MainSubMain/Sub Picture 001010101x1Code(Hexa) Remote control Code(Hexa) Remote control0F TV0B INPUT08 POWER79 RATIO10-19 Number Key 0-94C - (Dash)09 MUTE02 VOL +03 VOL -00 CH +01 CH -1E FAV39 CC4041070644 ENTER43 MENU45 Q.MENU52 SOUND4D PICTURE5B RETURN0A SAP1A FLASHBK](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-55.png)
![APPENDIX132APPENDIXCopyright (C) 1991, 1999 Free Software Foundation, Inc. 51Franklin Street, Fifth Floor, Boston, MA 02110-1301 USAEveryone is permitted to copy and distribute verbatim copies ofthis license document, but changing it is not allowed.[This is the first released version of the Lesser GPL. It alsocounts as the successor of the GNU Library Public License, ver-sion 2, hence the version number 2.1.]PreambleThe licenses for most software are designed to take away yourfreedom to share and change it. By contrast, the GNU GeneralPublic Licenses are intended to guarantee your freedom to shareand change free software - to make sure the software is free forall its users.This license, the Lesser General Public License, applies to somespecially designated software packages - typically libraries - ofthe Free Software Foundation and other authors who decide touse it. You can use it too, but we suggest you first think careful-ly about whether this license or the ordinary General PublicLicense is the better strategy to use in any particular case, basedon the explanations below.When we speak of free software, we are referring to freedom ofuse, not price. Our General Public Licenses are designed to makesure that you have the freedom to distribute copies of free soft-ware (and charge for this service if you wish); that you receivesource code or can get it if you want it; that you can change thesoftware and use pieces of it in new free programs; and that youare informed that you can do these things.To protect your rights, we need to make restrictions that forbiddistributors to deny you these rights or to ask you to surrenderthese rights. These restrictions translate to certain responsibilitiesfor you if you distribute copies of the library or if you modify it.For example, if you distribute copies of the library, whether gratisor for a fee, you must give the recipients all the rights that wegave you. You must make sure that they, too, receive or can getthe source code. If you link other code with the library, you mustprovide complete object files to the recipients, so that they canrelink them with the library after making changes to the libraryand recompiling it. And you must show them these terms so theyknow their rights.We protect your rights with a two-step method: (1) we copyrightthe library, and (2) we offer you this license, which gives you legalpermission to copy, distribute and/or modify the library.To protect each distributor, we want to make it very clear thatthere is no warranty for the free library. Also, if the library is mod-ified by someone else and passed on, the recipients should knowthat what they have is not the original version, so that the origi-nal author's reputation will not be affected by problems thatmight be introduced by others.Finally, software patents pose a constant threat to the existenceof any free program. We wish to make sure that a company can-not effectively restrict the users of a free program by obtaining arestrictive license from a patent holder. Therefore, we insist thatany patent license obtained for a version of the library must beconsistent with the full freedom of use specified in this license.Most GNU software, including some libraries, is covered by theordinary GNU General Public License. This license, the GNULesser General Public License, applies to certain designatedlibraries, and is quite different from the ordinary General PublicLicense. We use this license for certain libraries in order to per-mit linking those libraries into non-free programs.When a program is linked with a library, whether statically orusing a shared library, the combination of the two is legallyspeaking a combined work, a derivative of the original library. Theordinary General Public License therefore permits such linkingonly if the entire combination fits its criteria of freedom. TheLesser General Public License permits more lax criteria for linkingother code with the library.We call this license the "Lesser" General Public License becauseit does Less to protect the user's freedom than the ordinaryGeneral Public License. It also provides other free software devel-opers Less of an advantage over competing non-free programs.These disadvantages are the reason we use the ordinary GeneralPublic License for many libraries. However, the Lesser license pro-vides advantages in certain special circumstances.For example, on rare occasions, there may be a special need toencourage the widest possible use of a certain library, so that itbecomes a de-facto standard. To achieve this, non-free programsmust be allowed to use the library. A more frequent case is thata free library does the same job as widely used non-free libraries.In this case, there is little to gain by limiting the free library to freesoftware only, so we use the Lesser General Public License.In other cases, permission to use a particular library in non-freeprograms enables a greater number of people to use a large bodyof free software. For example, permission to use the GNU CLibrary in non-free programs enables many more people to usethe whole GNU operating system, as well as its variant, theGNU/Linux operating system.GNU LESSER GENERAL PUBLIC LICENSEVersion 2.1, February 1999](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-60.png)
![APPENDIX14111. MISCELLANEOUS.This license represents the complete agreement concerningsubject matter hereof. If any provision of this license isheld to be unenforceable, such provision shall be reformedonly to the extent necessary to make it enforceable. ThisLicense shall be governed by California law provisions(except to the extent applicable law, if any, provides oth-erwise), excluding its conflict-of-law provisions. Withrespect to disputes in which at least one party is a citizenof, or an entity chartered or registered to do business inthe united states of america, any litigation relating to thisLicense shall be subject to the jurisdiction of the federalcourts of the northern district of california, with venuelying in santa clara county, california, with the losing partyresponsible for costs, including without limitation, courtcosts and reasonable attorneys' fees and expenses. Theapplication of the united nations convention on contractsfor the International sale of goods is expressly excluded.Any law or regulation which provides that the language ofa contract shall be construed against the drafter shall notapply to this license.12. RESPONSIBILITY FOR CLAIMS.As between initial developer and the contributors, eachparty is responsible for claims and damages arising, directlyor indirectly, out of its utilization of rights under thislicense and you agree to work with initial developer andcontributors to distribute such responsibility on an equitablebasis. Nothing herein is intended or shall be deemed toconstitute any admission of liability.13. MULTIPLE-LICENSED CODE.Initial developer may designate portions of the coveredcode as "Multiple-Licensed". "Multiple-Licensed" meansthat the initial developer permits you to utilize portions ofthe covered code under your choice of the NPL or thealternative licenses, if any, specified by the initial developerin the file described in exhibit A.EXHIBIT A -Mozilla Public License.The contents of this file are subject to the Mozilla Public LicenseVersion 1.1 (the “license”); you may not use this file except incompliance with the License. You may obtain a copy of thelicense at http://www.mozilla.org/MPL/Software distributed under the license is distributed on an "ASIS" basis, WITHOUT WARRANTY OF ANY KIND, either expressor implied. See the license for the specific language governingrights and limitations under the License.The Original Code is ______________________________________.The Initial Developer of the Original Codeis___________________.Portions created by ______________________ are Copyright (C)_______________________. All Rights Reserved.Contributor(s): ______________________________________.Alternatively, the contents of this file may be used under theterms of the _____ license (the "[___] License"), in which casethe provisions of [______] license are applicable instead of thoseabove. If you wish to allow use of your version of this file onlyunder the terms of the [____] license and not to allow others touse your version of this file under the MPL, indicate your decisionby deleting the provisions above and replace them with thenotice and other provisions required by the [___] license. If youdo not delete the provisions above, a recipient may use your versionof this file under either the MPL or the [___] license."NOTE: The text of this exhibit A may differ slightly from the textof the notices in the source code files of the original code. Youshould use the text of this exhibit A rather than the text found inthe original code/source code for Your modifications.](https://usermanual.wiki/LG-Electronics-USA/26LG40UA.User-manual-2-of-2/User-Guide-924097-Page-69.png)
