LG Electronics USA 26LK330UB LCD TV Monitor User Manual G User s manual

Download:
Mirror Download [FCC.gov]
Document ID	1401394
Application ID	OzoYPUoGetwW8ftbWGLeig==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	258.29kB (3228628 bits)
Date Submitted	2011-01-07 00:00:00
Date Available	2011-02-21 00:00:00
Creation Date	2011-01-05 13:22:08
Producing Software	Acrobat Distiller 9.4.0 (Windows)
Document Lastmod	2011-01-05 13:25:44
Document Title	Microsoft Word - G_User_s manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C7F6C1A4

Order Number
: GETEC-C1-10-282
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-10-162
Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LCD TV/Monitor
FCC ID.: BEJ26LK330UB
2
LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivXÂŽ is a digital video format created by DivX, Inc. This is
an official DivX CertifiedÂŽ device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ENGLISH
ENG
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedÂŽ device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are registered trademarks of DivX,
Inc. and are used under license.”
OWNER’S MANUAL
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
LED LCD TV / LCD TV /
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
LED LCD TV MODELS
19LV2500 32LV3500
22LV2500 37LV3500
26LV2500 42LV3500
32LV2500 47LV3500
32LV3520 55LV3500
42LV3520
P/NO : SAC34134216 (1012-REV03)
LCD TV MODELS
22LK330 32LK450
26LK330 37LK450
32LK330 42LK450
32LK430 47LK450
42LK430 42LK520
47LK520
55LK520
PLASMA TV MODELS
42PW340 42PW350U
50PW340 50PW350U
42PW350 42PW350R
50PW350 50PW350R
50PZ200
60PZ200
www.lg.com
NOTE
LCD
: LED LCD TV, LCD TV
y : Plasma TV
Image shown may differ from your TV.
y
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y
Plasma
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
y
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
Read these instructions.
Keep these instructions.
Heed all warning.
Follow all instruction.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
- TO PREVENT FIRE OR SHOCK HAZARDS,
DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Do not use this apparatus near water.
y
Use only with a cart, stand, tripod, bracket,
y
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Clean only with dry cloth.
y
Do not block any ventilation openings. Install
y
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
y
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
y
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
ENGLISH
ENG
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
Only use attachments/accessories specified
y
by the manufacturer.
ENG
ENGLISH
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
Unplug this apparatus during lightning
y
storms or when unused for long periods of
time.
Refer all servicing to qualified service
y
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Never touch this apparatus or antenna during
y
a thunder or lightning storm.
When mounting a TV on the wall, make sure
y
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
y
to fall into the product, and do not drop
anything onto the screen.
CAUTION concerning the Power Cord
y
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
Warning - To reduce the risk of fire or
y
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
IMPORTANT SAFETY INSTRUCTIONS
Do not expose to dripping or splashing and
y
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Grounding
y
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Power Supply
Short-circuit Breaker
Do not attempt to modify this product in any
y
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
y
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
Generated Sound
y
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Cleaning
y
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
y
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
y
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
y
from the TV, unplug the power cord contact
an authorized service center.
Do not press strongly upon the panel with
y
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
Keep the product away from direct sunlight.
y
IMPORTANT SAFETY INSTRUCTIONS
yDot Defect
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
ENGLISH
ENG
As long as this unit is connected to the AC
y
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
ENG
ENGLISH
DISCONNECTING DEVICE FROM THE MAIN
y
POWER
The power outlet must remain readily
accessed in the event the device needs to
be unplugged.
Take care not to touch the ventilation
y
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
Viewing 3D Imaging (For 3D TV)
y
- When viewing 3D imaging, watch the TV
from an effective viewing angle and within
the appropriate distance. If you exceed this
viewing angle or distance, you may not be
able to view the 3D imaging. Furthermore,
the 3D imaging may not display if it is viewed
while you are lying down.
- If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.
- Watching the TV or playing video games
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
- Pregnant woman, seniors, persons with
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
- Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
- Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
- Warning for photosensitization seizure: Some
viewers may experience a seizure or epilepsy
when exposed to certain factors, including
flashing lights or images in TV or video
games. If you or anybody from your family
has a history of epilepsy or seizure, please
consult with your doctor before watching 3D
TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different
in each eye, they should watch the TV after
taking vision correction measures.
- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV.
- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.
- Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness
of your situation before moving.
IMPORTANT SAFETY INSTRUCTIONS
yLCD
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out
in accordance to the regulations of your local
authority.
TABLE OF CONTENTS
For USA and Canada
FCC NOTICE
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of the cable
entry as practical.
LICENSES
IMPORTANT SAFETY INSTRUCTIONS
Lock)
44
Using the quick menu
45
Using the customer support
45
- Testing the Picture / Sound
45
- Using the product or service information
TABLE OF CONTENTS
46 3D IMAGING (FOR 3D TV)
ENGLISH
ENG
NOTE TO CABLE/TV INSTALLER
ENG
ENGLISH
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved
by the party responsible for compliance
could void the user’s authority to operate the
equipment.
TABLE OF CONTENTS
10
ASSEMBLING AND PREPARING
46
3D Technology
47
- When using 3D Glasses
10
Unpacking
47
- 3D Imaging Viewing Range
14
Optional Extras
48
Viewing 3D Imaging
15
Parts and buttons
22
Lifting and moving the TV
22
Setting up the TV
22
- Attaching the stand
50
- Connecting USB storage devices
28
- Mounting on a table
51
- Browsing files
30
- Mounting on a wall
53
- Viewing Videos
31
- Tidying cables
56
- DivX registration code
32 REMOTE CONTROL
36 WATCHING TV
50 ENTERTAINMENT
57
- Viewing Photos
59
- Listening to music
61
CUSTOMIZING TV SETTINGS
61
The Main Menus
36
Connecting to an antenna or cable
62
Customizing Settings
36
- Connecting an antenna or basic cable
62
- CHANNEL Settings
36
- Connecting a cable box
63
- PICTURE Settings
37
Connecting to the AC/DC adapter
67
- AUDIO Settings
37
Turning the TV on for the first time
68
- TIME Settings
38
Watching TV
69
- LOCK Settings
38
Managing channels
71
- OPTION Settings
38
- Setting up channels
39
- Using favorite channels
40
- Checking current program info
42
Using additional options
74
Connection Overview
42
- Adjusting aspect ratio
75
Connecting to a HD receiver, DVD, or
43
- Changing AV modes
43
- Using the input list
75
- HDMI Connection
44
- Locking the buttons on the TV (Child
75
- DVI to HDMI Connection
73 MAKING CONNECTIONS
VCR player
TABLE OF CONTENTS
10
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
76
- Component Connection
76
- Composite Connection
77
Connecting to a PC
77
- HDMI Connection
77
- DVI to HDMI Connection
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
78
- RGB Connection
79
Connecting to an Audio System
79
- Digital optical audio connection
ENERGY AV MODE INPUT
79
Connecting to a USB
79
Connecting to a Headphone (
80
SIMPLINK Connection
80
- Activating and Using the SIMPLINK
TV
SAVING
FLASHBK
LIST
MARK
FAV
VOL
3D
CH
MUTE
MENU INFO
LCD
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control and batteries (AAA)
menus
81
Cleaning Your TV
81
- Screen and frame
81
- Cabinet and stand
81
- Power cord
81
Preventing “Image burn” or “Burn-in” on
your TV screen
82 TROUBLESHOOTING
84 SPECIFICATIONS
90 IR CODES
92 EXTERNAL CONTROL DEVICE
SETUP
100 OPEN SOURCE LICENSE
ENGLISH
ENG
MAINTENANCE
ENG
ENGLISH
81
Owner’s manual
Polishing cloth1
(Depending on model)
Gently wipe the spots on the cabinet with the polishing cloth.
CD
ASSEMBLING AND PREPARING
11
12
22LK330
PW340, PW350, PW350U, PW350R, PZ200 series
(Other models)
x4
ASSEMBLING AND PREPARING
(For 60PZ200)
x4
x3
x3
Cable holder
M4 x 28 M5 x 24
M4 x 26 M5 x 14.5
Screw for assembly
Cable holder
Protection cover
Power Cord
Power Cord holder
26/32LK330, LK430, LK450, LK520 series
(Except 47LK450,
47/55LK520)
Power Cord
Protection cover
Ferrite core
(Depending on model)
Protection cover tape
x8
M4 x 20
Screw for assembly
Screw for fixing
Protection cover
Power Cord
32LV2500, LV3500 series
M4 x 14
M4 x 12
Screw for assembly
Composite gender cable
Cable holder
Screw for fixing
Cable holder
Power Cord
AC/DC Adapter
19/22/26LV2500 series
x2
M4 x 16
M4 x 6
Screw for assembly
ENGLISH
ENG
x8
x8
ENG
ENGLISH
(For 32LV2500,
32/37LV3500)
(32LV2500) (LV3500 series)
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
ASSEMBLING AND PREPARING
13
14
ASSEMBLING AND PREPARING
Optional Extras
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
) How to use the ferrite core
y(
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.
Plasma
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
10 mm (+/-5 mm)
[to an External device]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 1]
3D Glasses
(AG-S230, AG-S250, AG-S270)
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[to the TV]
[to a wall plug]
[Cross Section of
Ferrite Core]
[Figure 2]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 3]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are two ferrite cores, follow as shown in Figures 1 and 2.
- If there are three ferrite cores, follow as shown in Figures 1 and 3.
( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10
y
mm (0.39 inches) thick and 18 mm (0.7 inches) width.
*A
*B
10 mm (0.39 inches)
18 mm (0.7 inches)
ENGLISH
ENG
[to a wall plug]
ENG
ENGLISH
3 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall
plug.
D-sub 15 pin signal cable1
When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable
with a ferrite core to maintain standards compliance for the product.
ASSEMBLING AND PREPARING
15
16
ASSEMBLING AND PREPARING
Parts and buttons
32LV2500, LV3500 series
PW340, PW350, PW350U, PW350R, PZ200 series
IN 3 USB IN
USB input
Screen
Screen
Side Connection panel
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
Remote control and
intelligent1 sensors
Power indicator
Remote control and
intelligent1 sensors
AV IN 2
Speakers
Speakers
VOL
CH
ENTER
HOME
Touch buttons2
INPUT
ENTER
CH
VOL
Touch buttons
AV IN 1
L/MONO
AUDIO R
COMPONENT IN
AUDIO IN
(RGB/DVI)
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
LAN
Touch button2
ANTENNA /
CABLE IN
Rear Connection panel
(See p.73)
H/P
COMPONENT IN
AUDIO
AUDIO
VIDEO
RGB IN(PC)
RS-232C IN
(CONTROL & SERVICE)
AV IN 1
ANTENNA
/CABLE
IN
L/MONO AUDIO R
PR
PR L
VIDEO
PB
PB
IN
IN 33
REMOTE
CONTROL IN
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
Rear Connection panel
(See p.73)
OPTICAL DIGITAL ANTENNA/
AUDIO OUT
CABLE IN
Touch button2
Description
AV IN 2
RGB IN (PC)
VIDEO / AUDIO
VIDEO
ENGLISH
ENG
ENG
ENGLISH
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
USBIN
IN
USB
HOME
INPUT
Description
Turns the power on or off.
/I
Turns the power on or off.
INPUT
Changes the input source.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
ASSEMBLING AND PREPARING
17
18
LK450 series
19/22/26LV2500
Side Connection panel
USB IN
USB input
Screen
USB IN
Screen
Side Connection panel
USB input
ASSEMBLING AND PREPARING
Remote control and
intelligent1 sensors
Speakers
AV (Audio
and Video)
input
CH
PR
ANTENNA /
CABLE IN
Rear Connection panel
(See p.73)
Touch button2
Turns the power on or off.
Touch buttons2
INPUT
PB
Description
AUDIO
/ DVI IN
VIDEO
Rear Connection panel
(See p.73)
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
Touch button2
HOME
ENGLISH
ENG
ENG
ENGLISH
CABLE
IN
ENTER
COMPONENT IN
(RGB/DVI)
AUDIO IN
AV IN 1
AUDIO R
AUDIO
L/MONO
OPTICAL DIGITAL
AUDIO OUT
RGB IN (PC)
ANTENNA
IN
VOL
CH
AV IN 2
PR
VIDEO
/ DVI IN
Speakers
PB
AV IN
VIDEO
DC-IN
RS-232C IN(CONTROL & SERVICE)
Touch buttons
INPUT
COMPONENT IN
(RGB/DVI)
AUDIO IN
RGB IN (PC)
HOME
ENTER
OPTICAL
DIGITAL
AUDIO OUT
VOL
VIDEO L/MONO AUDIO R
Power indicator
Headphone
output
Headphone
output
IN 3
HDMI input
Power indicator
Remote control and
intelligent1 sensors
Description
Turns the power on or off.
INPUT
Changes the input source.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
ASSEMBLING AND PREPARING
19
20
LK330 series
ASSEMBLING AND PREPARING
LK430 series
(For 22LK330)
Buttons2
HOME
INPUT
ENTER
CH
VOL
Side Connection panel
(For 26/32LK330)
Side Connection panel
Screen
Screen
CH
USB input
USB IN
CH
USB IN
USB input
VOL
VOL
Buttons2
ENTER
ENTER
Buttons2
HOME
HOME
INPUT
Power indicator
COMPONENT
IN
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
Scrolls through the saved channels.
IN 3
Accesses the main menus, or saves your input and exits the menus.
ANTENNA /
CABLE IN
Changes the input source.
PR
Turns the power on or off.
PB
/I
v CH ^
/ DVI IN
AUDIO
Rear Connection panel
(See p.73)
Rear Connection panel
(See p.73)
Button2
Description
INPUT
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
ANTENNA /
CABLE IN
VIDEO
AV IN 1
AUDIO
Button2
COMPONENT IN
(RGB/DVI)
AUDIO IN
OPTICAL DIGITAL
AUDIO OUT
RGB IN (PC)
Power indicator
AV IN 2
PR
VIDEO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
Remote control
Speakers
PB
AV IN 1
RGB IN (PC)
AV (Audio
and Video)
input
AUDIO IN
(RGB/DVI)
ENGLISH
ENG
AV IN 2
OPTICAL DIGITAL
AUDIO OUT
HOME
Headphone
output
Remote control
intelligent1 sensors (For 32LK330)
Speakers
ENG
ENGLISH
AV (Audio
and Video)
input
HDMI input
VIDEO L/MONO AUDIO R
Headphone
output
VIDEO L/MONO AUDIO R
HDMI input
IN 3
INPUT
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
ASSEMBLING AND PREPARING
21
22
LK520 series
Side Connection panel
ASSEMBLING AND PREPARING
Lifting and moving the TV
Setting up the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
Put your TV on a pedestal stand and mount the TV
on a table or wall.
Screen
CAUTION
Avoid touching the screen at all times, as
y
this may result in damage to the screen.
USB input
USB IN
CH
Attaching the stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
PW340, PW350, PW350U, PW350R, PZ200 series
VOL
ENTER
It is recommended to move the TV in the
y
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
y
the power cord and all cables.
When holding the TV, the screen should face
y
away from you to prevent damage.
Buttons2
HOME
Headphone
output
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
IN 3
INPUT
Remote control and
intelligent1 sensors
Speakers
surface.
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
Power indicator
AV IN 2
ENGLISH
ENG
PR
ANTENNA /
CABLE IN
PB
AUDIO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
VIDEO
AV IN 1
RGB IN (PC)
ENG
ENGLISH
COMPONENT IN
(RGB/DVI)
AUDIO IN
Hold the top and bottom of the TV frame
y
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
OPTICAL DIGITAL
AUDIO OUT
Rear Connection panel
(See p.73)
Button2
When transporting a large TV, there should
y
be at least 2 people.
When transporting the TV by hand, hold the
y
TV as shown in the following illustration.
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Lay the TV with the screen side down on a flat
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
When transporting the TV, do not expose the
y
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
y
upright, never turn the TV on its side or tilt
towards the left or right.
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M5 x 14.5
M5 x 24
ASSEMBLING AND PREPARING
3 Secure the TV and the stand with the 4
screws.
23
24
32LV2500, LV3500 series
To detach the stand,
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
M4 x 28
3 Secure the TV and the stand with the 4
screws.
1 Lay the TV with the screen side down on a flat
Model
ASSEMBLING AND PREPARING
1 Lay the TV with the screen side down on a flat
surface.
surface.
2 Remove the 4 screws and pull the stand away
CAUTION
from the TV.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
M4 x 28
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
Model
Screw for
assembly
Number of
screws
32LV2500
LV3500 series
M4 x 14
M4 x 12
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
32LV2500
M4 x 14
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
CAUTION
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
- This will protect the opening from
accumulating dust and dirt.
- When installing the wall mounting bracket,
use the Protection cover.
Protection
cover tape
Protection cover
ENGLISH
ENG
3 Push the supplied protection cover into the
ENG
ENGLISH
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
Model
Screw for
assembly
Number of
screws
LV3500 series
M4 x 12
2 Remove the 4 screws and pull the stand away
from the TV.
Model
Screw for
assembly
Number of
screws
32LV2500
LV3500 series
M4 x 14
M4 x 12
ASSEMBLING AND PREPARING
19/22/26LV2500 series
25
26
22LK330
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
ASSEMBLING AND PREPARING
1 Lay the TV with the screen side down on a flat
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
surface.
CAUTION
2 Remove the 2 screws and pull the stand away
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
from the TV.
Screw for assembly
Number of screws
M4 x 16
2 Assemble the parts of the STAND BODY with
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the screws and pull the stand away
from the TV.
2 Assemble the TV as shown.
the STAND BASE of the TV.
Screw for assembly
Number of screws
M4 x 6
3 Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
ENGLISH
ENG
ENG
ENGLISH
3 Secure the TV and the stand with the 2
screws.
Screw for assembly
Number of screws
M4 x 16
Protection cover
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
ASSEMBLING AND PREPARING
26/32LK330, LK430, LK450, LK520 series
1 Lay the TV with the screen side down on a flat
surface.
27
28
Mounting on a table
To detach the stand,
1 Lay the TV with the screen side down on a flat
1 Lift and tilt the TV into its upright position on a
surface.
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
2 Remove the 4 screws and pull the stand away
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
ASSEMBLING AND PREPARING
from the TV.
Screw for assembly
Number of screws
M4 x 20
Securing the TV to a table
(For 26/32LK330, 32/42LK430, 32/37/42LK450,
42LK520, 32LV2500, 32/37LV3500)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
10 cm (4 inches)
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Screw for assembly
Number of screws
M4 x 20
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
3 Push the supplied protection cover into the
ENGLISH
ENG
screws.
WARNING
CAUTION
ENG
ENGLISH
3 Secure the TV and the stand with the 4
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
NOTE
Screw for assembly
Number of screws
M4 x 20
Swivel 20 degrees to the left or right and
y
adjust the angle of the TV to suit your
view.
20
Protection cover
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
20
To prevent TV from falling over, the TV
y
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
29
30
Using the Kensington security system (optional)
ASSEMBLING AND PREPARING
Mounting on a wall
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
We recommend that you use an LG brand wall
mount when mounting the TV to a wall.
Connect the Kensington security system cable
between the TV and a table.
Model
37LV3500
42LK430
37/42/47LK450
42/47LK520
42/47/55LV3500
55LK520
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 200
M6
LSW200B,
LSW200BG
400 x 400
M6
LSW400B,
LSW400BG,
DSW400BG
10 cm (4 inches)
CAUTION
10 cm
10 cm
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
10 cm
2 Mount the wall brackets with the bolts to the
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
The Kensington security system is optional.
y
You can obtain additional accessories from
your local dealer.
ENGLISH
ENG
3 Connect the eye-bolts and wall brackets tightly
NOTE
ENG
ENGLISH
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
400 x 400
M6
PSW400B,
PSW400BG,
DSW400BG
600 x 400
M8
PSW600B
Model
19/22/26LV2500 32LV2500
22/26LK330
32LV3500
32LK330
32LK430
32LK450
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
100 x 100
M4
LSW100B,
LSW100BG
CAUTION
Make sure that children do not climb on or
y
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
y
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
y
can obtain additional accessories from your
local dealer.
Disconnect the power first, and then move
y
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
y
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
200 x 100
M4
LSW100B,
LSW100BG
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
y
supplied with the wall mount.
ASSEMBLING AND PREPARING
31
32
Tidying cables
REMOTE CONTROL
PW340, PW350, PW350U, PW350R, PZ200 series
REMOTE CONTROL
Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
22LK330, LV2500, LV3500 series
The descriptions in this manual are based on the buttons on the remote
control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the and ends to the label inside the compartment, and close
the battery cover. To remove the batteries, perform the installation actions
in reverse.
1 Gather and bind the cables with the cable
holder.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
y
Make sure to point the remote control toward at the remote control sensor on the TV.
Cable holder
Power cord holder
(POWER)
Turns the TV on or off.
2 Gather and bind the cables with the cable
26/32LK330, LK430, LK450, LK520 series
holder.
1 Gather and bind the cables with the cable
ENERGY SAVING (See p.63)
Adjusts the Energy Saving settings.
ENERGY AV MODE INPUT
TV
management clip.
SAVING
FLASHBK
LIST
CAUTION
Do not move the TV by holding the cable
y
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
ENGLISH
ENG
Cable holder
ENG
ENGLISH
2 Fix the cable management clip firmly to the TV.
AV MODE (See p.43)
Selects an AV mode.
INPUT (See p.43)
Rotates through inputs.
Also switches the TV on from standby.
TV
Returns to the last TV channel.
Cable management clip
Number button
Enters numbers.
ENERGY AV MODE INPUT
TV
SAVING
FLASHBK
LIST
LIST (See p.39)
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Alternates between the two last channels selected (pressing repeatedly).
REMOTE CONTROL
MARK
FAV
VOL
3D
CH
MUTE
INFO
Home Q.MENU
33
34
VOL
Adjusts the volume level.
INFO
MARK
Selects a menu or option.
FAV (See p.39)
Accesses your favorite channel list.
Home Q.MENU
Q. MENU (See p.44)
Accesses the quick menu.
BACK
EXIT
MUTE
Mutes all sounds.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
BACK
Allows the user to move back one step in an interactive application or
other user interaction function.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
EXIT
BACK
INFO (See p.40)
Views the information of the current program and screen.
Home
Accesses the main menus, or saves your input and exit the menus.
ENTER
3D (For 3D TV) (See p.46)
Used for viewing 3D video.
ENTER
REMOTE CONTROL
SIMPLINK (See p.80)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
EXIT
Clears all on-screen displays and returns to TV viewing.
FAV
VOL
RATIO
CH
MUTE
INFO
Home Q.MENU
MARK
Selects a menu or option.
FAV (See p.39)
Accesses your favorite channel list.
RATIO (See p.42)
Resizes an image.
ENTER
BACK
ENGLISH
ENG
ENG
ENGLISH
VOL
Adjusts the volume level.
MARK
MUTE
Mutes all sounds.
EXIT
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
3D SETTING
Colored buttons
These access special functions in some menus.
3D SETTING (For 3D TV) ( Plasma ) (See p.48)
Used for viewing 3D video.
REMOTE CONTROL
35
36
WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
FREEZE
RATIO
Control buttons
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
FREEZE ( Plasma )
Freezes the current frame (Not supported when using USB Mode and
Simplink.).
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.
RATIO (See p.42)
Resizes an image.
Connecting a cable box
Connect the TV to a cable box and the cable box
to a wall antenna socket with 2 RF cables (75 Ί).
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with an
RF cable (75 Ί).
ENGLISH
ENG
ENG
ENGLISH
CAUTION
Make sure not to bend the copper wire of
y
the RF cable.
NOTE
Use a signal splitter to use more than 2 TVs.
y
Visit http://lgknowledgebase.com for more
y
information about the antenna and cable
connection. Search for antenna.
Copper wire
Complete all connections between devices,
y
and then connect the power cord to the
power outlet to prevent damage to your TV.
WATCHING TV
Connecting to the AC/DC
adapter
38
your TV settings according to your preferences.
1 In Standby mode, press the power button on
Selects Home Use for
the home environment.
2 Press INPUT and select TV.
the remote control to turn the TV on.
Ø
Power Indicator
3 Control the TV using the following buttons
while you are watching TV.
Sets the standby light.
(For LED LCD TV)
Button
Ø
Time Zone
AC/DC Adaptor
Selects the time zone
and daylight saving.
Ø
Auto Tuning
1 Connect the AC/DC adapter plug to the power
Scans and saves available
channels automatically.
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
The Power indicator turns red and the TV
switches to Standby mode.
NOTE
You can also access Initial Setting by
y
accessing OPTION in the main menu.
Scrolls through saved channels.
Selects a channel on the saved
channel list.
0-9
Selects a channel by entering
numbers.
VOL (+, -)
Adjusts the volume level.
Mutes all sounds.
AV MODE
Selects an AV mode (See p.43).
Q.MENU
Accesses the quick menus
(See p.44).
FLASHBK
Alternates between the last two
channels selected.
RATIO
Resizes an image (See p.42).
FREEZE
Freezes the current frame while you
are watching TV ( Plasma ).
1 The Lock icon (ᯢ) appears in front of a
channel blocked with parental control.
2 Each AV mode has the optimized image and
sound settings. If you select Off, the image
and sound settings will be restored to the
previously customized settings.
4 When the basic settings are complete,
press ENTER.
NOTE
If you do not complete the Initial setting,
y
it will appear whenever the TV turns on.
Disconnect the power cord from the
y
power outlet when you do not use the
TV for a long period of time.
2 In Standby mode, press the power button on
the remote control to turn the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
ENGLISH
ENG
Please be sure to connect the TV to the AC/
y
DC power adapter before connecting the
TV’s power plug to a wall power outlet.
To display images in the best quality for
y
your home environment, select Home
Use.
Store Demo is suitable for the retail
y
environment.
If you select Store Demo, any
y
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
Power Indicator feature is disabled in
y
Store Demo mode.
ENG
ENGLISH
CAUTION
CH (^, v)
LIST1
NOTE
first, then plug the power cord into the wall
power outlet.
Description
MUTE
input jack on the TV.
2 Connect the power cord to the AC/DC adapter
Managing channels
Selects a language to
display.
Ø
Mode Setting
WATCHING TV
Watching TV
3 Follow the on-screen instructions to customize
Language
(For 19/22/26LV2500)
37
5 To turn the TV off, press the power button on
4 To turn the TV off, press the power button on
the remote control.
The TV switches to Standby mode.
*The Digital broadcasting (DTV, Cable DTV) is not
available for Philippines.
Setting up channels
Storing channels
To store channels automatically,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to Auto
Tuning and press ENTER.
4 Select Start to start automatic tuning.
The TV scans and saves available channels
automatically.
NOTE
If the TV scans and saves channels,
y
the previously saved channels will be
overwritten.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
To store channels manually,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to
Manual Tuning and press ENTER.
4 Scroll through the channel types, and then add
or delete channels.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
the remote control.
NOTE
If the TV scans a blocked channel, you will
y
be prompted to enter your password to keep
the channel scanned.
You can store up to 1000 channels. The
y
number of channels that you can store
differs depending on the broadcasting signal
environment.
The channels are stored in the order of DTV,
y
TV, Cable DTV and Cable TV.
WATCHING TV
Editing your channel list
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to
Channel Edit and press ENTER.
4 Edit channels using the following buttons.
Button
Description
39
Checking current program info
Add the channels that you watch frequently to the
favorite list.
Press ENTER to view the information of the currently program while you are watching.
The following information appears at the top of the screen.
Setting up your favorite list
Banner information
2 Press FAV.
ENTER
Selects the highlighted channel to
view.
CH (^, v)
Moves to the previous or next
page.
Blue button
Adds or deletes a channel.
The deleted channel displays in
blue.
6 Press ENTER to add the selected channel to
FAV
Registers or cancels the current
channel in favorite channel list.
7 When you are finished, press EXIT.
Q.MENU
Selects your desired favorite
channel group.
Yellow
button
Blocks or unblocks a channel.
the current channel in favorite channel list.
Press the Blue button to move to Channel Edit.
%ULHI,QIR7LWOH7HVW
6XQ)HE$0
$0 ᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69
1H[W$01HZV
Start time
Progress bar
Favorite.
Icon
the favorite list.
ENGLISH
ENG
NOTE
You can also setup Favorite List in the
y
CHANNEL menu - Channel Edit.
ENG
ENGLISH
NOTE
The Lock icon (ᯢ) appears in front of a
y
channel blocked with parental control.
If you select the blocked channel, you will be
y
prompted to enter your password.
Current time
5 Press the Navigation buttons to scroll to
- To move to the previous or next page, press
CH (^, v).
Description
Multilingual
᯾
The program contains two or more audio language services. You can change the
audio language using the quick menu.
Dolby Digital
᯸
The program contains a Dolby Digital audio signal in TV and HDMI input sources.
Caption
᯿
The program contains one or more language caption services. You can change the
caption language using the quick menu.
Aspect ratio
ᰆ
ᰇ
The original aspect ratio of the video is 4:3.
The original aspect ratio of the video is 16:9 (wide).
Resolution
L
S
S
L
S
The video resolution is 720 x 480i.
The video resolution is 720 x 480p.
The video resolution is 1280 x 720p.
The video resolution is 1920 x 1080i.
The video resolution is 1920 x 1080p.
Selecting a channel on the favorite list
1 Press FAV to access the favorite list.
2 Select a channel you want and press ENTER.
&11
4 Press the Yellow button to register or cancel
5 When you are finished, press EXIT.
- To move to the previous or next page, press
CH (^, v).
- To tune to the “CHANNEL menu - Channel
Edit”, press Blue button.
End time
$0
ᱏ᯻
desired favorite channel group.
Scrolls through channel types or
channels.

ᯌ'79
3 Press the Navigation buttons to select your
^, v, < , >
1 Press LIST to access the channel list.
Program title
1 Select a channel to add to the favorite list.
Highlights the channel type.
Selecting a channel on the channel list
WATCHING TV
Using favorite channels
When you return to the previous menu, press
BACK.
40
2 Select a channel you want and press ENTER.
Rating
ᯢ
The program contains Rating information.
See "LOCK Settings" on p.69.
WATCHING TV
41
42
WATCHING TV
Using additional options
Adjusting aspect ratio
ᯌ'79&11
ᯐ&K&KDQJH‫۽‬1H[Wᯙ:DWFK
Resize an image t at its optimal size by pressing
RATIO while you are watching TV.
Set By Program
%ULHI,QIR7LWOH7HVW
$0
$0 ᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69
NOTE
You can also change the image size by
y
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menu.
The available ratio varies depending on the
y
input source.
- The input sources: HDMI-PC and RGB-PC
support 4:3 and 16:9.
- The input sources: HDMI-PC 1920 X 1080
supports all of the aspect ratios.
1RLQIRUPDWLRQ
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ
ZLWKUHJXODUDQGVSHFLDOJXHVWV
ᯕ8S
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ ᯕ'RZQ
᯹
Button
Description
INFO
Shows current channel information.
< or >
Shows previous or next channel
information.
^ or v
Changes a channel.
Set By Program: Displays images in the same
aspect ratio as the original image.
(4:3
4:3 )
16:9: Resizes images to fit the screen width.
Just Scan: Displays video images in the original
size without cutting off the edges.
16:9 )
Set By Program
Zoom: Formats an image to fit the screen
width. The top and bottom of the image may
not appear.
ENGLISH
ENG
ENG
ENGLISH
(16:9
NOTE
If you access, Aspect Ratio in the Quick
menus,
Press < or > to stretch an image
y
vertically.
Press ^ or v to move the zoom focus up
y
or down.
Just Scan
NOTE
If you select Just Scan, you may see
y
image noises at the edge or edges of the
screen.
The input sources: DTV, Component,
y
HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.
Cinema Zoom: Formats an image to the
cinemascope ratio, 2.35:1.
To change the ratio of the cinema zoom,
y
press < or > and its range is from 1 to 16.
To move the zoom focus up or down,
y
press ^ or v.
4:3: Resizes images to the previous standard
4:3.
NOTE
If you enlarge or reduce an image, the
y
image may be distorted.
WATCHING TV
Changing AV modes
Each AV mode has optimized image and sound
settings.
Press AV MODE repeatedly to select an
appropriate mode.
Mode
Description
Changes to the previously customized
settings.
Uses the optimized image and sound
settings for a cinematic look.
Uses the optimized image and sound
settings for dynamic action sports.
Uses the optimized image and sound
settings for fast gaming.
When playing a video game using
PlayStation or Xbox. it is recommended
to use the Game mode.
When in Game mode, functions related
to picture quality will be optimized for
playing games.
Off
Cinema
Sport
Game
43
RGB-PC
Use the TV as a computer monitor.
HDMI
Watches video from a HTS or other
high definition devices.
44
Locking the buttons on the TV
(Child Lock)
The disconnected input sources will be gray.
To add an input label, press the Blue button.
y
You can easily identify a device connected to
each input source.
If you connect a new external device to the
y
TV, a pop-up window appears. Select Yes on
the pop-up window to switch to that input
source.
To access the SIMPLINK, press the Red
y
button. If you select “SIMPLINK and On”,
the pop-up window for the HDMI input will
not display. ( LCD )
ᯜ
$9
‫܁‬
$9
‫܁‬
‫۽‬
&RPSRQHQW
‫܁‬
‫۽‬
&RPSRQHQW
‫܁‬
‫۽‬
5*%3&
‫܁‬
‫۽‬
79
ᯒ0RYH
86%
$9
$9
&RPSRQHQW
‫܁‬$VSHFW5DWLR‫۽‬
9&5
‫۽‬
5 Select On to activate the Key lock feature.
- To deactivate the Key lock feature, select Off.
+'0,
+'0,
NOTE
The TV is programmed to remember the last
y
setting after you turn the TV off.
If you turn the TV off with the Key lock
y
feature activated, , INPUT, CH (^, v) or
Number buttons on the remote control.
If you press any button on the TV with the
y
Key lock feature activated,
Key Lock
appears on the screen.
ᯙ(QWHU
1 Press INPUT to access the input sources.
2 Press the Navigation buttons to scroll to one of
ᯕ6,03/,1.
Input source
LCD
3 Press the Blue button.
+'0,
ᯕ,QSXW/DEHO
ᰙ([LW
4 Press the Navigation buttons to scroll to one of
the input labels and press ENTER.
5 When you are finished, press EXIT.
Description
TV
Watch TV over the air, cable, and
digital cable broadcast.
USB
Play media files from a thumb drive.
AV
Watch video from a VCR or other
external devices.
Component
Watch video from a DVD or other
external devices, or through a digital
set-top box.
When you return to the previous menu, press
BACK.
ᯙ
When you return to the previous menu, press
BACK.
the input sources.
5*%3&
&ORVH
&RPSRQHQW
Key Lock and press ENTER.
ᯝ
the input sources and press ENTER.
,QSXW/LVW
the following menus.
4 Press the Navigation buttons to scroll to
ENGLISH
ENG
2 Press the Navigation buttons to scroll to one of
2 Press the Navigation buttons to scroll through
3 Input password.
ENG
ENGLISH
NOTE
1 Press Home to access the main menus.
and press ENTER.
,QSXW/DEHO
You can also access the input source list
y
by selecting INPUT in the Home menu.
1 Press Q. MENU to access the quick menus.
6 When you are finished, press EXIT.
1 Press INPUT to access the input sources.
- The connected device displays on each input
source.
Lock the buttons on the TV to prevent any
unwanted operations or accidents by children.
2 Press the Navigation buttons to scroll to LOCK
Add a label to an input source so that you can
easily identify a device connected to each input
source.
Selecting an input source
Using the quick menu
Customize frequently used menus.
Adding an Input label
Using the input list
WATCHING TV
Menu
Aspect Ratio
Description
Changes the image size (16:9,
Just Scan, Set By Program, 4:3,
Zoom, Cinema Zoom).
Picture Mode Changes the image mode
(Intelligent sensor1, Vivid,
Standard, APS1, Cinema, Sport,
Game, ᰛExpert1, ᰛExpert2).
Sound Mode Changes the sound mode
(Standard, Music, Cinema, Sport,
Game).
Multi Audio
Changes the audio language
(Digital signal).
SAP
Changes the MTS sound (Analog
signal).
Sleep Timer Sets the length of time until the
TV to turns off.
Del/Add
Edits the channels to add or delete
the channel.
Caption
Activates or deactivate the
subtitles.
USB Device Ejects a USB device when a USB
device is connected.
Depending on model
NOTE
The available menus and options may
y
differ from the input source that you are
using.
3 Press the Navigation buttons to scroll to the
option you want.
4 When you are finished, press Q. MENU.
WATCHING TV
45
46
Using the customer support
3D IMAGING (FOR 3D
TV)
Testing the Picture / Sound
To execute picture and sound tests.
3D Technology
1 Press Home to access the main menus.
2 Press the Red button to access Customer
This TV can display in 3D via 3D broadcasting or
when the TV is connected to a compatible device,
such as a Blu-ray 3D Player. The viewer must
wear compatible 3D glasses in order to see these
images in 3D format.
Support.
3 Press the Navigation buttons to scroll Picture
Test or Sound Test and press ENTER.
4 If you have any problem, press the Navigation
buttons to scroll to Yes and press ENTER.
WARNING
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Using the product or service
information
To check the product or service information
Support and press ENTER.
3 Press the Navigation buttons to scroll Product/
Service Info..
You can check the various product/Service
infomation based on your model.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENGLISH
ENG
2 Press the Red button to access Customer
ENG
ENGLISH
1 Press Home to access the main menus.
3D IMAGING
When viewing 3D imaging, watch the TV
y
from an effective viewing angle and within
the appropriate distance. The appropriate
angle and distance are provided in this
manual. If you exceed this viewing angle or
distance, you may not be able to view the
3D imaging. Furthermore, the 3D imaging
may not display if it is viewed while you are
lying down (For LED LCD TV).
If you watch the 3D imaging too closely or
y
for a long period of time, it may harm your
eyesight.
Watching the TV or playing video games
y
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
Pregnant woman, seniors, persons with
y
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
Some 3D imaging may cause you to duck
y
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
Please prevent children under the age of
y
5 from watching 3D TV. It may affect their
vision development.
Warning for photosensitization seizure:
y
Some viewers may experience a seizure or
epilepsy when exposed to certain factors,
including flashing lights or images in TV or
video games. If you or anybody from your
family has a history of epilepsy or seizure,
please consult with your doctor before
watching 3D TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
y
reduced with the following actions.
Âť Take frequent breaks from watching 3D
TV.
Âť For those who have vision that is different
in each eye, they should watch the TV
after taking vision correction measures.
Âť Watch the TV so that your eyes are on the
same level as the 3D screen and refrain
from sitting too closely to the TV.
Âť Do not watch the 3D imaging when tired
or sick, and avoid watching the 3D imaging
for a long period of time.
Âť Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D
TV.
Âť Some viewers may feel disoriented after
watching 3D TV. Therefore, after you
watch 3D TV, take a moment to regain
awareness of your situation before moving.
3D IMAGING
47
48
3D IMAGING
View 2D mode for 3D images
Viewing 3D Imaging
1 Play the 3D video or select 3D channel.
NOTE
When using 3D Glasses
2 Press 3D and select same type in your
1 Play the 3D video or select 3D channel.
CAUTION
(2D to 3D mode is available with all contents.)
3D glasses are sold separately. Refer to the
y
3D glasses manual for operating instructions.
Do not use the 3D glasses to replace your
y
corrective glasses, sunglasses or protective
goggles.
Do not store the 3D glasses in hot or cold
y
locations.
Do not drop objects onto the 3D glasses. Do
y
not drop or bend the glasses.
Since the lenses of the 3D glasses are
y
easily scratched, make sure to clean only
with a soft cloth. Shake off any dust before
using the cloth since the glasses are easily
scratched.
2 Press 3D and select same type in your
3D Video
2D Video
Viewing Distance
Viewing Angle
2 m - 10 m
(6.5 ft - 32.8 ft)
120 ° (When the viewing
distance is 2 m (6.5 ft))
2D Video
3 To turn off the 2D mode, press 3D and select
Turn off 2D Mode.
'YLGHR
NOTE
(QWHU
Turn on the 3D mode automatically for HDMI
y
input playing the 3D blueray titles.
window.
ENGLISH
ENG
TV size, viewing angle & other circumstances
may change the viewing distance and the angle of
view.
3D Video
ENTER.
3 Press ENTER on displayed information
3D Imaging Viewing Range
displayed picture on the screen.
(Select type on "2D Video" tab.)
displayed picture on the screen.
(Select type on "3D Video" tab.)
ENG
ENGLISH
To watch the TV in 3D, you must put on your
y
3D glasses. For best results, you should
wear LG Brand 3D glasses. The 3D imaging
may not display properly when using another
brand of 3D glasses. Please see the 3D
glasses manual for instructions on how to
use the 3D glasses.
After powering on the TV, a few seconds
y
may be needed for your TV to calibrate.
It may take a moment for you to see the
y
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
program.
The TV may flicker slightly if the 3D imaging
y
is displayed under 3 wavelength fluorescent
light (50 Hz - 60 Hz) or magnetic fluorescent
lamp (50Hz - 60 Hz). In such instances, it is
recommended to turn the lights off.
If there is an obstacle between the TV and
y
the 3D glasses, the 3D imaging may not
display properly.
Do not use the TV in close proximity to other
y
electronic and RF equipments.
In Analog TV, 3D Imaging does not work.
y
When watching 2D images, it is
y
recommended to take off the 3D glasses. If
you watch 2D images with the 3D glasses
on, you may see distorted images.
View 3D mode for 3D images
&DQFHO
Using 3D quick menu option
1 Press 3D SETTING.
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
2 Use the following options while viewing 3D
imaging.
view.
(QWHU
&DQFHO
ᯕ'6HWWLQJ
4 To turn off the 3D mode, press 3D and select
ENTER.
'6HWWLQJ
'3LFWXUH6L]H ‫܁‬
-XVW6FDQ
''HSWK ‫܁‬
'9LHZSRLQW
‫܁‬
'3LFWXUH%DODQFH
‫܁‬
'3LFWXUH&RUUHFWLRQ
‫܁‬
‫۽‬
‫۽‬
‫۽‬
2II
‫۽‬
/HIW5LJKW
‫۽‬
Turn off 3D Mode.
'PRGH
(QWHU
(QWHU
&DQFHO
ᯕ'6HWWLQJ
Button
(QG'YLGHR
Description
3D Picture Size
Cuts off the outer edges of the
picture and stretch it to fit the full
screen in 3D mode.
3D Depth
Adjusts the distance between the
object and the background in the
picture to enhance the 3D effect in
2D to 3D mode.
3D Viewpoint
Brings the picture (including both the
object and background images) to
the front or back to enhance the 3D
effect in 3D mode.
3D Picture
Balance
Adjusts the color and brightness
difference between the right and left
sides of the picture in 3D mode.
3D Picture
Correction
Changes the order of images in the
right and left sides of the picture in
3D mode.
3D IMAGING
49
50
ENTERTAINMENT
ENTERTAINMENT
CAUTION
Some menus may not work while watching
y
the TV in 3D.
The 3D imaging mode is disabled
y
automatically when switching DTV channels.
The screen may not be displayed properly
y
if you view 2D DTV images in 3D imaging
mode.
3D effect can be seen when 3D Mode is
y
selected appropriately for the 3D input signal
supplied to the TV.
For *mpo files (3D camera files), the 3D
y
imaging mode is enabled automatically.
3D may not be displayed properly for some
y
PC graphics cards.
Connecting USB storage devices
IN 3 USB IN
Connect USB storage devices such as a USB
flash drive or external hard drive to the TV and use
multimedia features (See "Browsing files" on p. 51).
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
NOTE
Energy Saving is disabled while playing in
y
3D.
or
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
ENGLISH
ENG
ENG
ENGLISH
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to USB
Device and press ENTER.
3 Disconnect the USB storage device only when
the message says that it is safe to remove.
CAUTION
Do not turn the TV off or remove a USB
y
storage device while the USB storage device
is connected to the TV, as this could result
in loss of files or damage to the USB storage
device.
Back up your files saved on a USB storage
y
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
Tips for using USB storage devices
The TV recognizes only a USB storage
y
device.
If you connect a USB storage device to the
y
TV through a USB hub, your TV may not
recognize the USB storage device.
The TV may not recognize a USB storage
y
device that requires a special driver.
The recognition speed of a USB storage
y
device may differ depending on the device.
Only use a USB storage device which has
y
normal music or image files.
Use only USB storage devices that are
y
formatted as a FAT 32 or NTFS file system.
If you format a USB storage device as a
y
NTFS file system, you cannot delete the
saved files.
You may need to connect a USB storage
y
device to an external power supply with a
power adapter.
If the TV does not recognize a connected
y
USB storage device, replace the cable and
try again. Do not use an excessively long
cable.
The TV does not support some USB storage
y
devices properly.
You can use a multi-partition (up to 4) USB
y
storage device.
You can use up to 4 USB storage devices at
y
a time by using a USB multi-card reader.
The file alignment method of a USB storage
y
device is similar to the one of Window XP.
You cannot create or delete a folder saved in
y
a USB storage device directly on the TV.
The number of characters for a file name is
y
up to 100 English characters.
If there are too many folders and files in one
y
folder, it may not operate properly.
The recommended capacity for a USB
y
external hard disk is 1 TB or less and for a
USB storage device is 32 GB or less.
If a USB external hard disk with the Energy
y
Saving feature does not work, turn the USB
external hard disk off and on again to make
it work properly. For more information, refer
to the user manual of the USB external hard
disk.
USB storage devices below USB 2.0 are
y
supported as well. But they may not work
properly in the movie list.
The electrostatic can cause USB device’s
y
malfunction. In this case, USB Device has to
be plugged again.
ENTERTAINMENT
Browsing files
86%;7,&.
1 Connect a USB storage device.
52
Type
'ULYH
3DJH
%PS
%PS
%PS
%PS





3 Press the Navigation buttons to scroll to MY
ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
MEDIA and press ENTER.
ᯕ7R0RYLH/LVW
No.
0<0(',$
3KRWR/LVW
0XVLF/LVW
5 Select Drive1 to access the connected USB
storage device.
file you want.
Moves to the upper level folder.
Current page number/total number of
pages
Current page number/total number of
pages
Contents under the folder focused on 1
Moves to Photo List, Music List, or
Movie List.
Yellow
button
Change Numbers: Changes the number
or thumbnails displayed at a time.
Blue
button
Allows you to mark certain files.
0
0
3DJH
0
0
%XWWHUIO\B

0
ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
ᯕ7R3KRWR/LVW
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°ż([LW
3DJH
3KRWR/LVW
86%;7,&.
3DJH
'ULYH
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ᯒ0RYHᯙ9LHZ᱇3DJH&KDQJH᱅0DUN
ᯕ7R0XVLF/LVW
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°ż([LW
3D mpo
Type
Supported File Formats
MOV, MKV, DivX, AVI, Motion JPEG (AVI,
MP4, MKV), ASF, WMV, FLV
yResolution:
under 1920 pixel (width) x 1080 pixel (height)
yFrame Rate:
under 30 frame/sec (1920 x 1080), under 60
frame/sec (1280 x 720)
yMax bitrate of playable movie file: 20 Mbps
(Mega bit per second)
yBit rate of audio format: within 32 kbps to
320 kbps (MP3)
ySupported subtitle format: *.smi, *.srt, *.sub
(MicroDVD, SubViewer 1.0/2.0), *.ass, *ssa,
*txt (TMPlayer), *.psb (PowerDivX)
Supproted ySOF0:
baseline
file format
ySOF1: Extend
Sequential
ySOF2:
Progressive
Supproted ympo
file format
Photo size y4:3 size: 3,648
x 2,736
2,592 x 1,944
2,048 x 1,536
y3:2 size: 3,648
x 2,432
Tips for using USB storage devices
Video yMPG, MPEG, DAT, TS, TRP, TP, VOD, MP4,
Profile
Photo size yMin: 64 x 64
yMax - Normal
Type: 15360
(W) x 8640 (H)
yProgressive
Type: 1920
(W) x 1440 (H)
Description
Green
button
3DJH
'ULYH
2D jpeg
jpg
jpe
Available buttons on the remote control
0RYLH/LVW
86%;7,&.
File
Item
Extensions
Description
ENGLISH
ENG
ENG
ENGLISH
á°ż([LW
Button
6 Press the Navigation buttons toSelect a folder/
ᯕ0DUN0RGH
For 3D TV
Press Navigation buttons to scroll to MOVIE
LIST, PHOTO LIST, or MUSIC LIST and press
ENTER.
0RYLH/LVW
ᯕ&KDQJH1XPEHUV
Supported File Formats
yAvailable size
Baseline: 64 pixel (W) x 64 pixel (H) - 15360
pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1920 pixel (W) x 1440 pixel (H)
* Do not use the progressive option when
saving JPG files on your PC.
yIt may take some time to open highresolution images in full screen.
%PS
2 Press Home to access the main menus.
ENTERTAINMENT
Photo yJPG
3DJH
0XVLF/LVW
Access the photo, music, or movie lists and
browse files.
51
Music yMP3
yBit rate range 32 Kbps - 320 Kbps
ySampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz,
24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz,
12 kHz
* A copy-protected file will not play.
ENTERTAINMENT
Viewing Videos
53
54
NOTE
Your TV can display video files from a USB storage
device.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
: Abnormal files are displayed using this
y
graphic.
y : Non-supported files are displayed using
this graphic.
7 Control playback by using the following
buttons.
3 Press the Navigation buttons to scroll to Movie
List and press ENTER.
4 Select Drive1 to access the connected USB
storage device.
Press the Navigation buttons to scroll to a
folder/file you want and press ENTER.
6 Play a movie by using the following menus/
buttons.
ᯚᯛ
á°Ś
á°§
á°Ś
á°¨

á°Ş
á°Š
ᰚ
áą­2SWLRQ
ᰙ+LGH
á°ż([LW
3DJH
0RYLH/LVW
'ULYH
86%;7,&.
0
3DJH
0
0
0
ᯕ7R3KRWR/LVW
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°Ś
Plays a video.
á°¨
Pauses or resumes the playback.
á°Ş
Scans backward in a file.
á°Š
Scans forward in a file.
á°¨ and á°Š
á°ż([LW
3DJH
0RYLH/LVW
0DUN0RGH
'ULYH
86%;7,&.
3DJH
< or >
0
0
0
0
%XWWHUIO\B

0
ᯒ0RYHᯙ0DUN᱇3DJH&KDQJH᱅0DUN
ᯕ3OD\0DUNHG
ᯕ0DUN$OO
ᯕ8QPDUN$OO
ᯕ([LW0DUN0RGH
á°ż([LW
Button
Description
Navigation
button
Scrolls through the files.
ENTER
Plays the highlighted file or enters
the mark mode.
CH (^, v)
Moves to the previous or next
page.
MARK
Enters the mark mode.
Menu
Description
Play Marked
Plays the selected video.
Mark All
Selects all files.
Unmark All
Clears all of your selections.
Exit Mark
Mode
Exit the Mark Mode.
Plays videos in slow motion.
Skips to specific points in a file
during playback. The time of a
specific point will appear on the
status bar. In some files, this
function may not work properly.
ENERGY
SAVING
Increases or deceases the
brightness of your screen.
Q.MENU
Shows the Option menu (See p.54).
AV MODE
Selects the desired source.
BACK
EXIT
Hides the menu on screen.
To see the menu again, press
ENTER button to display.
Returns to TV viewing.
Tips for playing video files
Some user-created subtitles may not work
y
properly.
Subtitles may not display some special
y
characters or HTML tags.
Subtitles in the non-supported languages are
y
unavailable.
The time information in an external subtitle
y
file should be arranged in ascending order to
play.
ENGLISH
ENG
ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
Description
Stops the playback.
ENG
ENGLISH
%XWWHUIO\B

0
Button
á°§
ENTERTAINMENT
The screen may suffer from temporary
y
interruptions such as image stoppage or
faster playback when you change the audio
language.
If you play a damaged video file, the video
y
file may not be played correctly or some
player functions may not be unavailable.
The TV may not properly play the video files
y
produced with certain encoders.
If the recorded file does not have video or
y
audio, either video or audio is not outputted
If the TV plays the recorded file without
y
video or audio, either video or audio is not
outputted.
The TV may not smoothly play the video files
y
with a resolution higher than the supported
resolution for each frame.
The TV may not properly play the video
y
files not included on the specified type and
format.
The TV may not play the files encoded with
y
GMC (Global Motion Compensation) or
quarter-pel motion estimation.
The TV supports the only files saved in ASCII
y
code in subtitles.
The maximum number of characters
y
displayed on each subtitle line is 250
(Korean), 500 (English), and 500 (Numbers).
The TV supports the only 10,000 sync blocks
y
within the subtitle file.
The TV supports the H.264 codec up to the
y
profile level 4.1.
The TV does not support DTS audio codec.
y
The TV cannot play a video file whose size is
y
larger than 30 GB.
If you play a video file through the USB
y
connection that does not support the high
speed, the video player may not work
properly.
The TV supports a USB storage device
y
whose version is lower than 2.0. However,
the USB storage device may not work
properly in the movie list.
The video file and its subtitle should be in
y
the same folder and the name of the video
file and subtitle should be identical.
You can adjust the image by using ENERGY
y
SAVING and AV MODE. But you cannot
customize image options of each mode.
The TV may not play the video files in the
y
supported file format depending on the
encoded condition.
The TV will not play the video files that has a
y
damaged index or no index.
Q.MENU options for movie list
1 Press Q. MENU.
A pop-up window will appear.
2 Press the Navigation buttons to scroll to movie
list option and press ENTER.
3 Press the Navigation buttons to scroll to one of
the following options and press ENTER.
Set Video Play.
Option
Description
Picture Size
Selects your desired picture format
for videos.
yFull Mode: Files are played in full
screen mode according to the
aspect ratio of video.
yOriginal Mode: Files are played in
their native size.
Audio
Language
Changes the Language Group of
the audio for video files. Files with
a single audio track cannot be
selected.
Subtitle
Language
The subtitles can be turned on or
off.
Language
Activated for SMI subtitles and
can select the language within the
subtitle.
Subtitle font selection. When set
to default, contents are displayed
in the language set in "Option Language - Menu Language."
Code Page
Subtitle
Language Group
Supported
Language
Latin1
English, Spanish,
French
Korean
English, Korean
Sync
If the video is not synchronized
with the captions, it can be adjusted
by 0.5 second.
Position
Move the location of the subtitles.
Size
Changes the subtitle font size.
Repeat
Turn on/off repeat function of movie
playback. When turned on, the
file within the folder will be played
back repeatedly. When turned off,
if the next file name is similar to
the previous file, it can be played
sequentially.
ENTERTAINMENT
55
56
ENTERTAINMENT
DivX registration code
NOTE
When replaying a video file after stopping,
y
select “Yes” to restart where it previously
stopped.
If continuous series files exist within the
y
folder, the next file will automatically be
played. But, this excludes cases when the
Repeat function of Movie List Option is
turned “On” (See p.54) or when set as Play
Marked.
Registering the DivX code
The DivX registration code allows you to rent or
purchase the latest movies at www.divx.com/vod.
To play a rented or purchased DivX file, the file’s
registration code should be same as your TV’s
DivX registration code.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
Set Video.
Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.63).
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
VOD Registration and press ENTER.
Set Audio.
5 View the registration code of your TV.
Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67).
 Copyright (C)  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later
version.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body of this License.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ENGLISH
ENG
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Also add information on how to contact you by electronic and paper mail.
ENG
ENGLISH
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
OPEN SOURCE LICENSE
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James
Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
OPEN SOURCE LICENSE
111
112
1.11. ‘’Source Code’’
means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any
associated interface definition files, scripts used to control compilation and installation of an Executable, or source code
differential comparisons against either the Original Code or another well known, available Covered Code of the
Contributor’s choice. The Source Code can be in a compressed
or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.
Mozilla Public License 1.1 (MPL 1.1)
1. Definitions.
1.0.1. “Commercial Use”
means distribution or otherwise making the Covered Code available to a third party.
1.12. “You’’ (or “Your”)
means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future
version of this License issued under Section 6.1.For legal entities, “You’’ includes any entity which controls, is controlled
by, or is under common control with You. For purposes of this definition, “control’’ means (a) the power, direct or indirect,
to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than
fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
1.1. ‘’Contributor’’
means each entity that creates or contributes to the creation of Modifications.
1.2. ‘’Contributor Version’’
means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by
that particular Contributor.
2. Source Code License.
1.3. ‘’Covered Code’’
means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
1.4. ‘’Electronic Distribution Mechanism’’
means a mechanism generally accepted in the software development community for the electronic transfer of data.
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce,
modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications,
and/or as part of a Larger Work; and
1.5. ‘’Executable’’
means Covered Code in any form other than Source Code.
ENGLISH
ENG
1.7. ‘’Larger Work’’
means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.
ENG
ENGLISH
1.6. ‘’Initial Developer’’
means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.
OPEN SOURCE LICENSE
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice,
sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original
Code under the terms of this License.
1.8. ‘’License’’
means this document.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code;
2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the
combination of the Original Code with other software or devices.
1.8.1. “Licensable”
means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently
acquired, any and all of the rights conveyed herein.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, nonexclusive license
1.9. ‘’Modifications’’
means any addition to or deletion from the substance or structure of either the Original Code or any previous
Modifications. When Covered Code is released as a series of files, a Modification
is:
(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
(b) Any new file that contains any part of the Original Code or previous Modifications.
1.10. ‘’Original Code’’
means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as
Original Code, and which, at the time of its release under this License is not already Covered Code governed by this
License.
1.10.1. “Patent Claims”
means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either
on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone
and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have
made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of
the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from
the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except
as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence
of Modifications made by that Contributor.
OPEN SOURCE LICENSE
113
114
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this
License or a future version of this License released under Section 6.1, and You must include a copy of this License with
every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that
alters or restricts the applicable version of this License or the recipients’ rights hereunder. However, You may include an
additional document offering the additional rights described in Section 3.5.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that
Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under
the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The
notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which
You describe recipients’ rights relating to the Covered Code. You may distribute the Executable version of Covered Code
or ownership rights under a license of Your choice, which may contain terms different from this License, provided that
You are in compliance with the terms of this License and that the license for the Executable version does not attempt to
limit or alter the recipient’s rights in the Source Code version from the rights set forth in this License. If You distribute
the Executable version under a different license You must make it absolutely clear that any terms which differ from this
License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial
Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any
such terms You offer.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under the
terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution
Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution
Mechanism,
must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months
after a subsequent version of that particular Modification has been made available to such recipients. You are responsible
for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained
by a third party.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License
and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License
are fulfilled for the Covered Code.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create
that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived,
directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer
in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the
origin or ownership of the Covered Code.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular
Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where
a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a
Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source
Code where You describe recipients’ rights or ownership rights relating to Covered Code. You may choose to offer, and
to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code.
However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must
make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or
such Contributor as a result of warranty, support, indemnity or liability terms You offer.
ENGLISH
ENG
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor’s
Modifications are Contributor’s original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by
this License.
ENG
ENGLISH
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party’s intellectual property rights is required to exercise the
rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code
distribution titled “LEGAL’’ which describes the claim and the party making the claim in sufficient detail that a recipient
will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described
in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and
shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those
who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs.
If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent
licenses which are reasonably necessary to implement that API, Contributor must also include this information in the
LEGAL file.
OPEN SOURCE LICENSE
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code
due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum
extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL
file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to
understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered
Code.
6. Versions of the License.
6.1. New Versions.
Netscape Communications Corporation (‘’Netscape’’) may publish revised and/or new versions of the License from time
to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use it
under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent
version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable
to Covered Code created under this License.
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is not
already Covered Code governed by this License), You must (a) rename Your license so that the phrases ‘’Mozilla’’,
‘’MOZILLAPL’’, ‘’MOZPL’’, ‘’Netscape’’, “MPL”, ‘’NPL’’ or any confusingly similar phrase do not appear in your license
(except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license
contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial
Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be
modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS’’ BASIS, WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS
FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE
OPEN SOURCE LICENSE
115
116
PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME
THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY
CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is
held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys’ fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein
and fail
to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are
properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect
beyond the termination of this License shall survive.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or
indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors
to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any
admission of liability.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial
Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as
“Participant”) alleging that:
(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such
Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate
prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually
agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your
litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable
royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not
withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration
of the 60 day notice period specified above.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY
DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL
HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT
APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S NEGLIGENCE TO THE
EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a ‘’commercial item,’’ as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of ‘’commercial computer software’’ and ‘’commercial computer software documentation,’’ as such terms are used in 48 C.F.R.
12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S.
Government End Users acquire Covered Code with only those rights set forth herein.
ENGLISH
ENG
8.3. If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under
Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the
event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-Licensed means that the
Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative
licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
ENG
ENGLISH
(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly infringes any
patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the
date You first made, used, sold, distributed, or had made, Modifications made by that Participant.
OPEN SOURCE LICENSE
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License
Version 1.1 (the “License”); you may not use this file except in
compliance with the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an “AS IS”
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________.All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms
of the _____ license (the [___] License), in which case the
provisions of [______] License are applicable instead of those
above.If you wish to allow use of your version of this file only
under the terms of the [____] License and not to allow others to use
your version of this file under the MPL, indicate your decision by
deleting the provisions above and replace them with the notice and
other provisions required by the [___] License. If you do not delete
the provisions above, a recipient may use your version of this file
under either the MPL or the [___] License.”
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original
Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your
Modifications.]
OPEN SOURCE LICENSE
117
118
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must
include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived
from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.
org/)”
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL
code. The SSL documentation included with this distribution is covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is
used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the
form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
MIT license
ENGLISH
ENG
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
This product includes software written by Tim Hudson (tjh@cryptsoft.com).
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ENG
ENGLISH
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
OPEN SOURCE LICENSE
- libcurl
Copyright (c) 1996 - 2010, Daniel Stenberg, .
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
- ncurses
Copyright (c) 1998 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR HE USE OR OTHER DEALINGS IN THE SOFTWARE.
OPEN SOURCE LICENSE
119
120
thus encourage you to use the following text:
Portions of this software are copyright  The FreeType Project (www.freetype.org). All rights reserved.
Please replace  with the value from the FreeType version you actually use.
Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the ale, use or other dealings in this Software without prior written authorization.
Legal Terms
0. Definitions
Throughout this license, the terms `package’, `FreeType Project’ and `FreeType archive’ refer to the set of files originally
distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be they named
as alpha, beta or final release.
Expat license
The source package was downloaded from .
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s
source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using the
FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you
are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
The original packager is Adam Di Carlo .
The current maintainer is Ardo van Rangelrooij .
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
============
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType
font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license
affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion
and use of free software in commercial and freeware products alike. As a consequence, its main points are that:
- We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’ distribution)
- You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’ usage)
- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the FreeType code. (`credits’)
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We
ENGLISH
ENG
The FreeType Project LICENSE
ENG
ENGLISH
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
OPEN SOURCE LICENSE
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES
CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object
code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights
granted herein, subject to the following conditions:
- Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes to
the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.
- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the
FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in
your documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more
of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project’,
`FreeType Engine’, `FreeType library’, or `FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify
it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all
the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.
freetype-devel@nongnu.org
OPEN SOURCE LICENSE
121
122
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at http://www.freetype.org
tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software
is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
JPEG license
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly
indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based
in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
BSD license
zlib/libpng License
This product may contain open source software licensed under zlib/libpng License.
Md5 checksum : Copyright (C) 1999, 2000, 2002 Aladdin Enterprises.
y
Zlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
y
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it
and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
X.net license
Copyright (c) 1995-2001 International Business Machines Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen
ENGLISH
ENG
(Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
(Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
ENG
ENGLISH
Libmng : Copyright Š 2000-2008 Gerard Juyn (gerard@libmng.com)
y
Libpng : Copyright (c) 1998-2008 Glenn Randers-Pehrson
y
OPEN SOURCE LICENSE
- strace
Copyright (c) 1991, 1992 Paul Kranenburg 
Copyright (c) 1993 Branko Lankester 
Copyright (c) 1993 Ulrich Pegelow 
Copyright (c) 1995, 1996 Michael Elizabeth Chastain 
Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey 
Copyright (C) 1998-2003 Wichert Akkerman 
Copyright (c) 2002-2008 Roland McGrath 
Copyright (c) 2003-2008 Dmitry V. Levin 
Copyright (c) 2007-2008 Jan Kratochvil 
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- xyssl
Copyright (C) 2006-2008 Christophe Devine
Copyright (C) 2009 Paul Bakker 
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
OPEN SOURCE LICENSE
123
claimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
RSA Data Security license
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5
Message-Digest Algorithm” in all material mentioning or referencing this software or this function.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability
of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
ENG
ENGLISH
License is also granted to make and use derivative works provided that such works are identified as “derived from the
RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.
The model and serial numbers of the TV is
located on the back of the TV
Record it below should you ever need service.
MODEL
SERIAL
Regulatory Information cont.
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matĂŠriel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the “CE” Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
• EN 55022
; Radio Frequency Interference
• EN 55024
; Electromagnetic Immunity
• EN 61000-3-2
; Power Line Harmonics
• EN 61000-3-3
; Voltage Fluctuations
• EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numĂŠrique de la classe B
01
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Development’s website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCO’99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCO’99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCO’99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCO’99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCO’99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
Regulatory Information cont.
•
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
• The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCO’99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCO’03 (TCO’03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCO’03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
• Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
• Energy-saving mode after a certain time – beneficial
both for the user and the environment
• Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
• Electromagnetic fields
03
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einfließen lassen. Zusätzliche
Informationen über unsere ‘grüne’ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our ‘green’ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection del’environnement
LGE. a publié sa 'Déclaration en faveur d’un
environnement plus propre' en 1994 et celle-ci est restĂŠe,
depuis lors, un principe directeur de notre entreprise.
Cette dĂŠclaration a servi de base Ă  notre rĂŠflexion et nous
a permis de prendre en compte Ă  la fois les aspects
ĂŠconomiques et sociaux de nos activitĂŠs, tout en
respectant l’environnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkĂźndete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung fßr eine sauberere
Umwelt). Seitdem dient dieses Ideal als fĂźhrendes Prinzip
des Unternehmens. Diese Erklärung war die Basis fßr die
DurchfĂźhrung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Überlegungen mit einbezogen wurden.
Wir fÜrdern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezĂźglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activitĂŠs en faveur de la
préservation de l’environnement et c’est dans cet esprit
que nous dĂŠveloppons nos produits : nous rĂŠduisons au
minimum les matières dangereuses qui entrent dans leur
composition et l’on ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui prĂŠsentent
un risque pour l’environnement. Il est donc important que
celui-ci soit recyclÊ après usage.
LGE. traite les moniteurs en fin de cycle conformĂŠment Ă 
une mĂŠthode de recyclage respectueuse de
l’environnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites rĂŠpartis dans le monde
entier. De nombreux composants sont rĂŠutilisĂŠs et
recyclÊs, et les matières dangereuses, ainsi que les
mĂŠtaux lourds, sont traitĂŠs selon un procĂŠdĂŠ ĂŠcologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un l’un de nos représentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
kĂśnnen. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er außer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
RĂźcknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr Ăźber unser Recyclingprogramm erfahren
mÜchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rôle de notre entreprise dans l’amélioration de
l’environnement. Pour plus de renseignements sur notre
politique “verte”, rendez visite à notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
econĂłmicos y medioambientales.
Informazioni per la tutela dell’ambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente piĂš pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attivitĂ  a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attivitĂ  a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dell’ambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservaciĂłn
del medio ambiente y desarrollamos nuestros productos
especĂ­ficamente para que se ajusten a la filosofĂ­a que
protege el entorno.
Reducimos al mĂĄximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
InformaciĂłn para el reciclaje
Este monitor puede contener piezas que entraĂąen riesgos
medioambientales. Es importante reciclar este monitor
despuĂŠs de su utilizaciĂłn.
LGE. trata todos los monitores usados siguiendo un
mĂŠtodo de reciclaje que no daĂąa al entorno. Contamos
con diversos sistemas de recuperaciĂłn y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias daĂąinas y los metales pesados se tratan
siguiendo un mĂŠtodo que no perjudique al medio
ambiente. Si desea obtener mĂĄs informaciĂłn acerca del
programa de reciclaje, pĂłngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. È
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dell’ambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visiĂłn y nuestras polĂ­ticas en un mundo
mĂĄs limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evoluciĂłn como empresa.
Visite nuestra pĂĄgina Web para obtener mĂĄs informaciĂłn
sobre nuestras polĂ­ticas ecolĂłgicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo piĂš pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica “verde”.
http://www.lge.com/about/environment/html/Recycling.jsp
PortuguĂŞs
Informaçþes relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde entĂŁo
como um princípio administrativo de orientação. A
Declaração Ê a base que nos tem permitido realizar
atividades favoråveis ao ambiente com consideração
atenta aos aspectos econĂ´micos, ambientais e sociais.
EspanĂľl
InformaciĂłn para la conservaciĂłn
medioambiental
LGE. presentĂł la 'DeclaraciĂłn para un entorno mĂĄs limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La DeclaraciĂłn
es la base que nos ha permitido llevar a cabo tareas que
especificamente o conceito de favorĂĄvel ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, nĂŁo hĂĄ cĂĄdmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informaçþes relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. É importante que ele seja reciclado
apĂłs o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados atravĂŠs
de um mĂŠtodo de reciclagem agradĂĄvel ao ambiente. HĂĄ
vårios sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarĂŁo por tratamento atravĂŠs de um mĂŠtodo
favorĂĄvel ao ambiente.
Para obter mais informaçþes sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visĂŁo e nossas polĂ­ticas relacionadas a
um mundo mais limpo selecionando a questĂŁo do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informaçþes
sobre nossas polĂ­ticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚
Nederlands
¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡
'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',
ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ
ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË
Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘ËÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ
‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë
ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂ
ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ
‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò
ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË.
Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı
‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı
ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚
›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,
ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
06
Regulatory Information cont.
Regulatory Information cont.
WEEE
ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂ
ËÒÔÓθÁÓ‚‡Ìˡ.
KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚Â
ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó
ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ
‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡
ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚
·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ
‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚
·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË
ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
English
«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ
ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í
ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ
ÍÓÔÓ‡ˆËË LG.
Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ
·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ
ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛
Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚
ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:
http://www.lge.com/about/environment/html/Recycling.jsp
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autoritĂ  locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni piĂš dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en Üverkryssad
soptunna pü hjul sitter pü en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bĂśr
kasseras via andra vägar än de som finns fÜr
hushüllsavfall, helst via fÜr ändamület avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat pü rätt sätt
sĂĽ bidrar du till att fĂśrhindra negativa
konsekvenser fÜr miljÜn och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan fĂĽr av kommunen,
renhüllningsverket eller den butik där du kÜpte
produkten.
French
Élimination de votre ancien appareil
1.Ce symbole, reprĂŠsentant une poubelle sur
roulettes barrĂŠe d'une croix, signifie que le
produit est couvert par la directive europĂŠenne
2002/96/EC.
2.Les ĂŠlĂŠments ĂŠlectriques et ĂŠlectroniques
doivent ĂŞtre jetĂŠs sĂŠparĂŠment, dans les videordures prĂŠvus Ă  cet effet par votre municipalitĂŠ.
3.Une ĂŠlimination conforme aux instructions aidera
Ă  rĂŠduire les consĂŠquences nĂŠgatives et risques
ĂŠventuels pour l'environnement et la santĂŠ
humaine.
4.Pour plus d'information concernant l'ĂŠlimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures mÊnagères ou
encore la magasin oĂš vous avez achetĂŠ ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
07
08
Regulatory Information cont.
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger pü miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fĂĽs ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkÜ- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristÜÜn ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Portuguese
Greek
Hungarian
∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜
1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜
‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ
ηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.
2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ
ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο
ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓ
ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜
¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ
ÙÔÈΤ˜ ·Ú¯¤˜.
3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·
‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ
ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.
4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ
·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂ
ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ
·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·ÙÂ ÙÔ
ÚÔ˚fiÓ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte mßssen
getrennt vom HausmĂźll Ăźber dafĂźr staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäßen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persÜnlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
Slovak
Polish
Czech
CĂłmo deshacerse de aparatos elĂŠctricos y
electrĂłnicos viejos
1.Si en un producto aparece el sĂ­mbolo de un contenedor
de basura tachado, significa que ĂŠste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos elĂŠctricos o electrĂłnicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a travĂŠs de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pĂşblica.
4.Para obtener mĂĄs informaciĂłn sobre cĂłmo deshacerse de
sus aparatos elĂŠctricos y electrĂłnicos viejos, pĂłngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquiriĂł el producto.
Danish
SĂĽdan smider du dit gamle apparat ud
1.NĂĽr der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjĂŚlp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2011:01:05 13:22:08+09:00
Modify Date                     : 2011:01:05 13:25:44+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.4.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:01:05 13:25:44+09:00
Format                          : application/pdf
Title                           : Microsoft Word - G_User_s manual.doc
Creator                         : 
Document ID                     : uuid:7038bffc-0a06-418a-94d6-c084f26edbc4
Instance ID                     : uuid:9b120590-4a4d-4063-962e-14d9b2c3efb8
Page Count                      : 69

EXIF Metadata provided by EXIF.tools