LG Electronics USA 32LE5300UC LED LCD TV User Manual G User s manual

Download:
Mirror Download [FCC.gov]
Document ID	1251709
Application ID	Zc9VI1bUFmIjgSd37ru9Sw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	214.02kB (2675211 bits)
Date Submitted	2010-03-12 00:00:00
Date Available	2010-04-26 00:00:00
Creation Date	2010-03-11 18:25:59
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-03-11 18:49:52
Document Title	Microsoft Word - G_User_s manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C7F6C1A4

Order Number
: GETEC-C1-10-053
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-10-026
Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LED LCD TV/Monitor
FCC ID.: BEJ32LE5300UC
OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO : SAC34134204 (1001-REV00)
www.lge.com
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
FCC Notice
Class B digital device
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This device may not cause (harmful)
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation (of the
device).
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any
way without written authorization from LG
Electronics.
Unauthorized modification could void the user’s
authority to operate this product.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Protect the power cord from being walked
on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lighting
storms or when unused for long periods
of time.
10
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the ma nufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
SAFETY INSTRUCTIONS
11
Never touch this apparatus or antenna during
a thunder or lighting storm.
12
When mounting a TV on the wall, make sure
not to install the TV by the hanging power
and signal cables on the back of the TV.
13
Do not allow an impact shock or any objects
to fall into the product, and do not drop onto
the screen with something.
14
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged
or cracked wire insulation are dangerous . Any
of these conditions could result in electric
shock or fire. Periodically examine the cord of
your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by
an authorized servicer. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the
cord exits the appliance.
Do not use a damaged or loose power cord.
Do not pull on the power cord to unplug the
TV. Grasp the plug when unplugging the
power cord.
15
WARNING - To reduce the risk of fire or electrical shock, do not expose this product to
rain, moisture or other liquids. Do not touch
the TV with wet hands. Do not install this
product near flammable objects such as
gasoline or candles or expose the TV to
direct air conditioning.
16
Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
17
GROUNDING
Ensure that you connect the earth ground
wire to prevent possible electric shock (i.e. a
TV with a three-prong grounded AC plug
must be connected to a three-prong grounded AC outlet). If grounding methods are not
possible, have a qualified electrician install a
separate circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
Short-circuit
Breaker
18
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
19
As long as this unit is connected to the AC
wall outlet, it is not disconnected from AC
power even if you turn off the power switch
on the unit.
20
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding electrodes and requirements for the grounding
electrode.
23
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
24
Take care not to touch the ventilation openings. When watching the TV for a long
period, the ventilation openings may
become hot.
25
If you smell smoke or other odors coming
from the TV or hear strange sounds, unplug
the power cord contact an authorized service
center.
26
Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
27
Keep the product away from direct sunlight.
28
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effects on the screen.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Ground Clamp
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
21
22
Cleaning
When cleaning, unplug the power cord and
rub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take
2 or more people to carry larger TVs. Do not
press against or put stress on the front panel
of the TV.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product
contains a small amount of mercury. Do not
dispose of this product with general household waste. Disposal of this product must be
carried out in accordance to the regulations of
your local authority.
CONTENTS
WARNING / CAUTION ............................... 2
SAFETY INSTRUCTIONS
Important Safety Instructions.............................. 3
FEATURE OF THIS TV ................................ 8
PREPARATION
Accessories.............................................................9
Front Panel Information ..................................... 11
Back Panel Information.....................................16
Stand Instructions ...............................................20
VESA wall mounting .........................................28
Cable Management ..........................................30
Desktop Pedestal Installation .........................32
Swivel Stand ........................................................32
Attaching the TV to a Desk ............................33
Kensington Security System ..........................33
Securing the TV to the Wall to Prevent Falling
when the TV is used on a stand ...................34
Antenna or Cable Connection.......................35
EXTERNAL EQUIPMENT SETUP
HD Receiver setup.............................................36
DVD setup............................................................39
VCR SETUP.......................................................... 41
Other A/V Source Setup.................................42
USB Connection ................................................43
Headphone Setup ............................................43
Audio out Connection......................................44
PC Setup..............................................................45
WATCHING TV / CHANNEL CONTROL
Remote Control Functions ..............................52
Turning on the TV..............................................54
Channel Selection..............................................54
Volume Adjustment ..........................................54
Initial Setting .......................................................55
On-Screen Menus Selection .......................... 57
Quick menu.........................................................59
Customer Support
- Picture Test / Sound Test ...........................60
- Product/Service Info....................................... 61
Simple Manual....................................................62
Channel Setup
- Auto Scan (Auto Tuning)..............................63
- Add/Delete Channel (Manual Tuning) .....64
- Channel Editing...............................................65
Favorite Channel Setup....................................66
Favorite Channel List ........................................66
Channel List ........................................................ 67
Channel Information .........................................68
Channel Brief Information............................... 69
Input List .............................................................. 70
Input Label............................................................ 71
Reset to factory default (Initial Setting) ...... 72
Mode Setting ...................................................... 73
Demo Mode ........................................................ 74
AV Mode............................................................... 75
SIMPLINK............................................................. 76
MY MEDIA
Connection Method .......................................... 78
Entry Mode .......................................................... 79
Movie List ............................................................ 80
Photo List ............................................................. 87
Music List .............................................................93
DivX Registration Code....................................98
Deactivation .........................................................99
PICTURE CONTROL
Picture Size (Aspect Ratio) Control............100
Picture Wizard................................................... 102
ᰚEnergy Saving ............................................ 104
Preset Picture Settings (Picture mode)..... 105
Manual Picture Adjustment - User Mode 106
Picture Improvement Technology (Advanced
Control) ................................................................107
Expert Picture Control ....................................108
Picture Reset........................................................111
Power Indicator ....................................................111
TruMotion ............................................................ 112
SOUND & LANGUAGE CONTROL
Auto Volume....................................................... 113
Clear Voice II ...................................................... 114
Balance ................................................................ 115
Preset Sound Settings (Sound Mode) ....... 116
Sound Setting Adjustment - User Mode...117
Audio Reset........................................................ 118
TV Speakers On/Off Setup ........................... 119
Stereo/SAP Broadcast Setup ...................... 120
Audio Language .............................................. 121
On-screen Menus Language Selection .... 122
Caption Mode
- Analog Broadcasting System Captions . 123
- Digital Broadcasting System Captions... 124
- Caption Option.............................................. 125
APPENDIX
Troubleshooting................................................ 142
Maintenance...................................................... 145
Product Specifications ................................... 146
IR Code................................................................ 151
External Control through RS-232C ........... 152
Open Source License..................................... 158
TIME SETTING
Clock Setting
- Auto Clock Setup ......................................... 126
- Manual Clock Setup .....................................127
Auto On/Off Time Setting ............................ 128
Sleep Timer Setting ........................................ 129
PARENTAL CONTROL / RATINGS
Set Password & Lock System
- Setting up Your Password .......................... 130
- Set Password .................................................. 131
- Lock System................................................... 132
Channel Blocking............................................. 133
Movie & TV Rating .......................................... 134
Downloadable Rating...................................... 139
External Input Blocking .................................. 140
Key Lock .............................................................. 141
FEATURE OF THIS TV
ᯍ
Some of these features are not available on all models.
High-definition
television.
Highresolution digital television broadcast
and playback system composed of
roughly a million or more pixels, 16:9
aspect-ratio screens, and AC3 digital
audio. A subset of digital television,
HDTV formats include 1080i and 720p
resolutions.
AV Mode is three preset picture and
audio settings. It allows the viewer to
quickly switch between common settings. It includes Cinema, Sports, and
Game Modes.
A unique invisible speaker system
tuned by renowned audio expert, Mr.
Mark Levinson. Speakers are embedded in strategic spots behind the front
cabinet and use minute vibrations to
turn the entire front bezel into the
speaker system. The result s a clean,
polished look, and enhanced audio by
increasing the “sweet spot”, giving a
wider and richer sound field.
Automatically enhances and amplifies
the sound of human voice frequency
range to help keep dialogue audible
when background noise swells.
Unlike other sensors which can only
sense brightness of ambient light, LG’s
“Intelligent Sensor” uses 4,096 sensing steps to evaluate its surroundings.
Using a sophisticated algorithm, the LG
processes picture quality elements
including brightness, contrast, color,
sharpness and white balance. The result
is a picture optimized for it’s surroundings, more pleasing to watch and which
can also save up to 50% in power consumption.
Manufactured under license from Dolby
Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
Displays HDTV programs in full 1920 x
1080p resolution for a more detailed
picture.
View videos and photos and listen to
music on your TV through USB 2.0
(‘videos’ dependent on model).
ABOUT DIVX VIDEO: DivXÂŽ is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that
plays DivX video. Visit www.divx.com for
more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX CertifiedÂŽ device must be
registered in order to play DivX Videoon-Demand (VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup
menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
“DivX Certified to play DivX video up to
HD 1080p, including premium content”
“Pat. 7,295,673; 7,460,688;7,519,274”
IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN
ᯍ
ᯍ
ᯍ
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
PREPARATION
1.5V 1.5V
Owner’s Manual
CD Manual
Remote Control,
Batteries (AAA)
Option Extras
Not included with all models
* Wipe spots on the exterior only with the
polishing cloth.
Polishing Cloth
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
D-sub 15 pin Cable
When using the VGA (D-sub 15
pin cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain standards compliance.
19/22/26LE5300, 22/26LE5500
(For 26LE5300,
26LE5500)
x4
(For 26LE5300,
26LE5500)
x4
(M4 x 14)
(M4 x 20)
Screws for stand assembly
(Refer to P.20, 22)
x4
Cable Holder
(Refer to p.31)
Ring spacers
(Refer to p.29)
AC/DC Adapter
Power Cord
32/37/42/47LD450, 42/47/55LD630
(For 32/37/42LD450,
42LD630)
x8
(M4 x 20)
Screws for stand assembly Screw for stand fixing
(Refer to P.24)
(Refer to P.33)
Protection Cover
(Refer to P.25)
Power Cord
PREPARATION
32/42/47LD420, 32/42/47/55LD520
(Except 55LD520)
(Except 47LD420,
47/55LD520)
PREPARATION
x4
(M4 x 24)
Screws for stand assembly
(Refer to P.26)
Screw for stand fixing
(Refer to P.33)
Protection Cover
(Refer to P.27)
Power Cord
32/37/42/47/55LE5300, 42/47/55LE7300
(32/37/42/47/55LE5300)
(32LE5300)
(37/42LE5300)
x4
x4
(M4 x 22)
(M4 x 24)
(47/55LE5300)
x4
(M4 x 26)
x4
(M4 x 16)
Screws for stand assembly
(Refer to P.22)
(42/47LE7300)
x3
(55LE7300)
x4
(M4 x 20) (M4 x 12)
x3
x4
(M4 x 26) (M4 x 16)
Screws for stand assembly
(Refer to P.21)
(For 42/47/55LE7300)
(For 32LE5300)
x2
Cable Holder
(Refer to p.31)
10
Component gender cable,
AV gender cable
Cable Management Clip
(Refer to p.31)
Screw for stand fixing
(Refer to P.33)
FRONT PANEL INFORMATION
ᯍ
Image shown may differ from your TV.
19/22LE5300, 22LE5500
Remote Control Sensor
PREPARATION
19/22/26/32/37/42/47/55LE5300,
22/26LE5500
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.Ĺšp.111)
26/32/37/42/47/55LE5300, 26LE5500
SPEAKER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.Ĺšp.111)
19/22/26LE5300, 22/26LE5500
CH
VOL
ENTER
CHANNEL VOLUME
(-, +)
(ᰝ,ᰜ)
Buttons
Buttons
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
32/37/42/47/55LE5300
CH
VOL
CHANNEL VOLUME
(-, +)
(ᰝ,ᰜ)
Buttons
Buttons
ENTER
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
11
PREPARATION
42/47/55LE7300
CH
VOL
CHANNEL
(‫ۻ‬,‫ )ۿ‬Buttons
VOLUME (+, -)
Buttons
ENTER Button
Power/Standby Indicator
(Can be adjusted using the
Power Indicator in the OPTION
menu.Ĺšp.111)
ENTER
MENU Button
MENU
INPUT Button
INPUT
POWER Button
Remote Control Sensor
! NOTE
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
ĹšDo not step on the glass stand or subject it
to any impact.It may break, causing possible
injury from fragments of glass, or the TV
may fall.
ĹšDo not drag the TV. The floor or the product
may be damaged.
15
PREPARATION
BACK PANEL INFORMATION
ᯍ
Image shown may differ from your TV.
19/22LE5300,
22LE5500
RS-232C IN
USB IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
IN 3
(DVI)
26LE5300,
26LE5500
AV IN
VIDEO L(MONO) AUDIO R
H/P
RGB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
H/P
DC-IN
/DVI IN
11
USB IN
PREPARATION
19/22/26LE5300, 22/26LE5500
ANTENNA/
CABLE IN
Power Connection
DC IN
Connect the AC/DC adapter plug to the
power input jack on the TV.
Connect the power cord to the AC/DC
adapter first, then plug the power cord into
the wall power outlet.
AC/DC Adaptor
CAUTION
ŹPlease be sure to connect the TV to the AC/DC power adapter before connecting the TV’s
power plug to a wall power outlet.
16
32/37/42/47/55LE5300
PREPARATION
USB IN
10
OPTICAL
DIGITAL
AUDIO OUT
(CONTROL & SERVICE)
RS-232C IN
AV IN 1
RGB IN (PC)
VIDEO L/MONO AUDIO R
COMPONENT IN 1
AUDIO IN
(DVI)
PB
PR
VIDEO
(RGB/DVI)
AUDIO
ANTENNA/
CABLE IN
AV IN2
VIDEO / AUDIO
/DVI IN
H/P
COMPONENT IN2
Y PB PR / AUDIO
IN 4
CAUTION
For HDMI IN 4 and USB IN
ĹšFor an optimal connection,
HDMI cables and USB
devices should have bezels
less than 10 mm (0.39
inches) thick.
42/47/55LE7300
RS-232C IN
(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
RGB IN (PC)
L/MONO AUDIO R
VIDEO
*A
1(DVI)
AUDIO IN
(RGB/DVI)
PB
VIDEO
PR
AUDIO
10 mm (0.39 inches)
ANTENNA/
CABLE IN
COMPONENT IN 1
17
2
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesn’t
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
0.32 cm (1/8 inch) headphone jack for analog
PC audio input.
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesn’t work.
RS-232C IN (CONTROL & SERVICE)
Used by third party devices.
This port is used for service or Hotel mode.
AV (Audio/Video) IN
Analog composite connection. Supports standard definition video only (480i).
ANTENNA/CABLE IN
Connect over-the-air or cable signals to this
jack.
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
USB INPUT
Used for viewing videos, photos and listening
to MP3s.
HEADPHONE
0.32 cm (1/8 inch) headphone jack
Impedance 16 Ί , Maximum audio out 15 mW
10
Power Cord or Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.
11
DC-IN
PREPARATION
19
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
Model
19LE5300,
22LE5300,
22LE5500,
26LE5300,
26LE5500
32LE5300,
32LD420,
32LD450,
32LD520
37LE5300, 42LE5300,
47LE5300,
37LD450,
42LE7300, 47LE7300
42LD450, 47LD450,
42LD420, 47LD420,
42LD520, 47LD520,
42LD630, 47LD630
Standard
Screw
Quantity
Wall Mounting Bracket
(sold separately)
LSW100B, LSW100BG
100 * 100
M4
LSW100B, LSW100BG
200 * 100
M4
LSW200B, LSW200BG
200 * 200
M6
LSW400B, LSW400BG
55LE5300,
55LE7300,
55LD520,
55LD630
28
400 * 400
M6
! NOTE
ĹšDo not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
ĹšLG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
PREPARATION
ĹšScrew length needed depends on the wall
mount used. For further information, refer to
the instructions included with the mount.
ĹšStandard dimensions for wall mount kits are
shown in the table.
ĹšWhen purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
ĹšDo not use screws longer than the standard
dimension, as they may cause damage to the
inside to the TV.
ĹšFor wall mounts that do not comply with the
VESA standard screw specifications, the length
of the screws may differ depending on their
specifications.
CAUTION
ĹšDo not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
For 26LE5300, 26LE5500
Place the ring spacers on the set before installing the wall
mounting bracket so that the inclination of the backside
of the set can be adjusted perpendicularly.
4-RING SPACERS
29
PREPARATION
DESKTOP PEDESTAL INSTALLATION
ᯍ
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
PREPARATION
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
CAUTION
ĹšEnsure adequate ventilation by following the clearance recommendations.
ĹšDo not mount near or above any type of heat source.
SWIVEL STAND (Except 19/22LE5300, 22LE5500)
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 Âş to suit
your viewing position.
32
ATTACHING THE TV TO A DESK
(For 32/42LD420, 32/37/42LD450, 32/42LD520, 42LD630, 32LE5300)
Image shown may differ from your TV.
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
Stand
PREPARATION
ᯍ
1-Screw
(provided as parts of the product)
Desk
WARNING
ĹšTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
KENSINGTON SECURITY SYSTEM
ᯍ
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
33
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
ᯍ
PREPARATION
ᯍ
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
ᯍ
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
ᯍ
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
! NOTE
ĹšUse a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
ĹšTo use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
34
ᯍ
ᯍ
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
Image shown may differ from your TV.
ANTENNA OR CABLE CONNECTION
PREPARATION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA/
CABLE IN
RF Coaxial Wire (75 Ί)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the copper wire
when connecting the antenna.
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 Ί)
ᯍ
ᯍ
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.
com. Search for antenna.
35
EXTERNAL
EXTERNALEQUIPMENT
EQUIPMENT
SETUP
SETUP
ᯍ
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
ᯍ
IThis part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 26LE5300/26LE5500.
HD RECEIVER SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
Component Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT IN
VIDEO or 1/2* jacks on the TV. Match the jack
colors (Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO or 1/2*
jacks on the TV.
VI)
PR
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box operation.)
2. How to use
ᯍ
PB
AV IN
VIDEO L(MONO) AUDIO R
GB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
ANTENNA/
CABLE IN
Select the Component or Component1/2* input
source on the TV using the INPUT button on the
remote control.
* Component2: For 32/37/42/47/55LE5300, 42/47/55LE7300
ᯍ
Y, CB/PB, CR/PR
1280x720p
1920x1080i
1920x1080p
36
15.73
60.00
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
USB IN
59.94
IN 4
15.73
AV IN2
VIDEO / AUDIO
720x480p
Vertical
Frequency(Hz)
H/P
720x480i
Horizontal
Frequency(KHz)
COMPONENT IN2
Y PB PR / AUDIO
Resolution
For 32/37/42/47/55LE5300,
42/47/55LE7300
PR
PB
HDMI Connection
DC-IN
No separate audio connection is necessary.
HDMI supports both audio and video.
(DVI)
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
2. How to use
ᯍ
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
ᯍ
Select the HDMI1, HDMI2, HDMI3*, or HDMI4**
input source on the TV using the INPUT button
on the remote control.
* HDMI3: For 26LE5300/5500, 32/42/47/55LD520, 42/47/55LD630
** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300
HDMI OUTPUT
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to HDMI/DVI IN
1, 2, 3*, or 4** jack on the TV.
/DVI IN
1. How to connect
! NOTE
ŹIf an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
Ĺš HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1
KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)
HDMI-DTV
Resolution
720x480p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
37
EXTERNAL EQUIPMENT SETUP
1. How to connect
DC-IN
EXTERNAL EQUIPMENT SETUP
/DVI IN
DVI to HDMI Connection
(DVI)
RS-232C IN
(CONTROL&SERVICE)
Connect the DVI output of the digital set-top
box to the HDMI/DVI IN 1 or 2* jack on the TV.
Connect the digital set-top box audio output to
the AUDIO IN (RGB/DVI) jack on the TV.
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO1 L(MONO) AUDIO R
RGB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
2. How to use
ᯍ
ᯍ
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
Select the HDMI1 or HDMI2* input source on the
TV using the INPUT button on the remote control.
* HDMI2: For 32/42/47/55LD520, 42/47/55LD630
! NOTE
ĹšA DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio
connection is necessary.
38
AUDIO
DVI OUTPUT
DVD SETUP
Component Connection
1. How to connect
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO or 1/2* jacks on the
TV.
(DVI)
PB
PR
RS-232C IN
ᯍ
ᯍ
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
Turn on the DVD player, insert a DVD.
Select the Component or Component1/2* input
source on the TV using the INPUT button on the
remote control.
Refer to the DVD player’s manual for operating
instructions.
(CONTROL&SERVICE)
2. How to use
ᯍ
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT IN VIDEO or 1/2*
jacks on the TV. Match the jack colors (Y =
green, PB = blue, and PR = red).
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
PB
VIDEO
PR
AUDIO
ANTENNA/
CABLE IN
COMPONENT IN
* Component2: For 32/37/42/47/55LE5300, 42/47/55LE7300
Component Input ports
To get better picture quality, connect a DVD
player to the component input ports as shown
below.
USB IN
PR
PB
PR
B-Y
R-Y
Cb
Cr
Pb
Pr
H/P
IN 4
PB
AV IN2
VIDEO / AUDIO
Video output ports
on DVD player
COMPONENT IN2
Y PB PR / AUDIO
Component ports on
the TV
For 32/37/42/47/55LE5300,
42/47/55LE7300
PR
PB
39
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
1. How to connect
DVI)
EXTERNAL EQUIPMENT SETUP
ᯍ
ᯍ
RS-232C IN
(CONTROL&SERVICE)
Connect the AUDIO/VIDEO jacks between TV
and DVD. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2. How to use
ᯍ
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
GB IN (PC)
Turn on the DVD player, insert a DVD.
Select the AV or AV1/2* input source on the TV
using the INPUT button on the remote control.
Refer to the DVD player's manual for operating
instructions.
PB
VIDEO
PR
AUDIO
ANTENNA/
CABLE IN
COMPONENT IN
* AV2: Except 19/22/26LE5300, 22/26LE5500
VIDEO
AUDIO
HDMI Connection
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, 2, 3*, or 4** jack on the TV.
DC-IN
/DVI IN
1. How to connect
(DVI)
No separate audio connection is necessary.
HDMI supports both audio and video.
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
2. How to use
ᯍ
ᯍ
PB
VIDEO
PR
! NOTE
ŹIf an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
Ĺš HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1
KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)
AUDIO
COMPONENT IN
Select the HDMI1, HDMI2, HDMI3*, or HDMI4** input
source on the TV using the INPUT button on the
remote control.
Refer to the DVD player's manual for operating
instructions.
* HDMI3: For 26LE5300/5500, 32/42/47/55LD520, 42/47/55LD630
** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300
40
HDMI OUTPUT
VCR SETUP
Antenna Connection
1. How to connect
O) AUDIO R
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
AUDIO
ANTENNA/
CABLE IN
Connect the antenna cable to the RF
antenna in socket of the VCR.
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
AUDIO
Wall Jack
2. How to use
ᯍ
ᯍ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel number.
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
Antenna
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
1. How to connect
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
VI)
2. How to use
ᯍ
ᯍ
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select the AV or AV1/2* input source on the TV
using the INPUT button on the remote control.
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
B IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
ANTENNA/
CABLE IN
* AV2: Except 19/22/26LE5300, 22/26LE5500
! NOTE
ĹšIf you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L(MONO) jack of the TV.
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
AUDIO
41
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
EXTERNAL EQUIPMENT SETUP
Connect the AUDIO/VIDEO jacks
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
DC-IN
/DVI IN
1. How to connect
(DVI)
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
2. How to use
PB
VIDEO
PR
AUDIO
COMPONENT IN
ᯍ
ᯍ
Select the AV or AV1/2* input source on
the TV using the INPUT button on the
remote control.
Operate the corresponding external
equipment.
ANTENNA/
CABLE IN
* AV2: Except 19/22/26LE5300, 22/26LE5500
VIDEO
Video Game Set
Camcorder
42
USB CONNECTION
1. How to connect
2. How to use
After connecting the USB IN jack, you
Memory Key
IN 3
ᯍ
or
H/P
use the USB function. (Ĺšp.78)
EXTERNAL EQUIPMENT SETUP
Connect the USB device to the USB
IN jack on the side of TV.
USB IN
HEADPHONE SETUP
You can listen to the sound through the headphone.
Plug the headphone into the headphone socket.
To adjust the headphone volume,
press the VOL +/- button. If you
press the MUTE button, the sound
from the headphone is switched off.
H/P
1. How to connect
! NOTE
Ĺš AUDIO menu options are disabled when connecting a
headphone.
Ĺš When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
Ĺš Optical Digital Audio Out is not available when connecting a headphone.
43
EXTERNAL EQUIPMENT SETUP
AUDIO OUT CONNECTION
1. How to connect
EXTERNAL EQUIPMENT SETUP
(DVI)
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
Connect the other end of the optical cable to
the digital audio input on the audio equipment.
Set the “TV Speaker option - Off” in the
AUDIO menu. (Ĺšp.119). See the external audio
equipment instruction manual for operation.
! NOTE
ĹšWhen connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
off in the menu. (Ĺšp.119)
CAUTION
ĹšDo not look into the optical output port. Looking at
the laser beam may damage your vision.
ĹšAudio with ACP (Audio Copy Protection) function may
block digital audio output.
44
/DVI IN
Send the TV’s audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
RGB IN (PC)
PB
PR
VIDEO
AUDIO
COMPONENT IN
ANTENNA/
CABLE IN
PC SETUP
VGA (D-Sub 15 Pin) Connection
DC-IN
/DV
This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV’s settings.
RS 232C IN
(DVI)
(CONTROL&SERVICE)
Connect the VGA output of the PC to the
RGB IN (PC) jack on the TV.
RGB IN (PC)
ᯍ
PB
VIDEO
PR
AUDIO
COMPONENT IN
Connect PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
ᯍ
AV IN
VIDEO L(MONO) AUDIO R
RGB OUTPUT
AUDIO
Turn on the PC and the TV.
Select the RGB-PC input source on the TV using
the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
1. How to connect
45
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
1. How to connect
Connect the DVI output of the PC to the
HDMI/DVI IN 1 or 2* jack on the TV.
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
ᯍ
ᯍ
Turn on the PC and the TV.
Select the HDMI1 or HDMI2* input source on the
TV using the INPUT button on the remote control.
DC-IN
/DVI IN
EXTERNAL EQUIPMENT SETUP
(DVI)
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
RGB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
* HDMI2: For 32/42/47/55LD520, 42/47/55LD630
AUDIO
46
AV IN
VIDEO L(MONO) AUDIO R
DVI OUTPUT
! NOTE
ĹšTo get the the best picture quality, adjust the PC graphics card to 1360 x 768 (19/22/26LE5300)
or 1920 x 1080 (Other models).
ĹšDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
ĹšAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
ĹšThe synchronization input form for Horizontal and Vertical frequencies is separate.
ĹšDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
ŹWhen selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.
EXTERNAL EQUIPMENT SETUP
ĹšIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
Supported Display Specifications (RGB-PC, HDMI-PC)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.712
60.015
1280x1024
63.981
60.02
1600x1200
75.00
60.00
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.50
60.00
Except 19/22/26LE5300
Except 32/37/42/47/55LE5300,
42/47/55LE7300, 22/26LE5500
47
MY
MY MEDIA
MEDIA
CONNECTION METHOD
USB Connection
USB IN
1 Connect the USB device to the USB IN jack on the side of TV.
MY MEDIA
N3
Memory Key
Precautions when using the USB device
ĹšOnly a USB storage device is recognizable.
ĹšConnecting a USB storage device through a USB hub is not supported.
ĹšA USB storage device which uses its own driver may not be recognized.
ĹšThe recognition speed of a USB storage device may depend on each device.
ĹšPlease do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
ĹšOnly use a USB storage device which has normal music files, image files, or movie files.
ĹšPlease use only a USB storage device which was formatted as a FAT 32 or NTFS file system provided with the Windows operating system. Others may not be recognized.
ĹšSome USB storage devices require a power adapter. The power adapter must be connected in
order to be seen by the TV.
ĹšIf a device is not recognized by the TV, try a different cable. Excessively long cables are not supported.
ĹšSome USB storage devices may not be supported or operate properly.
ĹšPlease backup important files because data on USB device could be damaged. Data management
is consumer's responsibility and as a result, the manufacturer does not cover data damage.
ĹšIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can
use up to 4 partitions or USB memory devices.
ĹšIn case of USB storage devices formatted as NTFS, deletion is not supported.
ĹšFile alignment method of USB storage device is similar to Window XP and file names can be up
to 100 English characters.
ĹšThe recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB
memory.
ŹIf a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and
on again to make it work properly. Refer to the user manual of the USB external hard disk.
ĹšUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
78
ENTRY MODE
The My Media menu will open automatically when you insert a USB drive. My Media can also be
accessed by choosing My Media in the user menu.
On USB device, you can not add a new folder or delete the existing folder.
MY MEDIA
Movie List
Photo List
Music List
MENU
Select MY MEDIA.
ENTER
Select Movie List, Photo List
or Music List.
ENTER
ᯍ
MY MEDIA
Except 32/42/47LD420,
32/37/42/47LD450,
32/42/47/55LD520,
This TV can view JPG image files, HD DivX
files or play MP3 audio files.
When removing the USB device
Select the USB Device menu before
removing the USB device.
Q.MENU
ENTER
Select USB Device.
Select Eject.
79
MY MEDIA
MOVIE LIST
(Except 32/42/47LD420, 32/37/42/47LD450, 32/42/47/55LD520)
The movie list is activated once a USB drive is detected. It is used when playing movie files on the TV.
It displays all of the video files it recognizes.
The On-Screen Display on your model may be slightly different.
MY MEDIA
Supported movie file
ᯍ Resolution: under 1920 pixel (width) x 1080 pixel (height)
ᯍ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720)
ᯍ Max bitrate of playable video file: 20 Mbps (Mega bit per second)
ᯍ Bit rate : within 32 kbps to 320 kbps (MP3)
ᯍ Supported external subtitle format: *.smi/*.srt/*.sub (MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt
(TMPlayer)/*.psb (PowerDivX)
ᯍ Supported Internal subtitle format: only, XSUB (It is the subtitle format used in DivX6 files)
Precautions when playing the video files
ĹšSome user-created subtitles may not work properly.
ĹšSome special characters are not supported in subtitles.
ĹšHTML tags are not supported in subtitles.
ĹšTime information in an external subtitle file should be arranged in ascending order to be played.
ĹšThe screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
ĹšA damaged video file may not be played correctly, or some functions may not be usable.
ĹšVideo files produced with some encoders may not be played correctly.
ĹšIf the video and audio structure of recorded file is not interleaved, the file not playback properly.
ĹšVideo with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for smooth playback.
ĹšVideo files other than the specified types and formats may not work properly.
ĹšThe movie file encoded by the GMC (Global Motion Compensation) is not supported.
ĹšOnly 250 Korean characters, 500 letters and 500 numbers are supported for each line of the
subtitle.
ĹšOnly 10000 sync blocks are supported within the subtitle file.
ĹšWe do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
ĹšDTS Audio codec is not supported.
ĹšA video file more than 30GB in file size is not supported for playback.
ŹPlaying a video via a USB connection that doesn’t support high speed may not work properly.
ĹšUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
ĹšThe video file and its subtitle file must be located in the same folder.
At this time, a video file name and its subtitle file name must be identical for it to be displayed.
ĹšWhen you are watching a movie via the Movie List function, you can adjust the picture with the
ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode
is not supported.
80
Supported Video Formats
File
Video Decoder
Audio Codec
mpg, mpeg
MPEG1, MPEG2
MP2, MP3, Dolby Digital, LPCM
dat
MPEG1
MP2
ts, trp, tp
MPEG2, H.264, AVS, VC1
MP2, MP3, Dolby Digital, AAC,
HE-AAC
vob
MPEG1, 2
MP2, MP3, Dolby Digital, LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12, DivX 5.x,
DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10-beta1/2H.264
AAC, HE-AAC, MP3
mkv
H.264, MPEG-1,2,4
divx, avi
MPEG2, MPEG4, DivX 3.11, DivX 4,
DivX 5, DivX 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
Max Resolution
Extension name
HE-AAC, LPCM
1920 x 1080 @ 30p
MP2, MP3, Dolby Digital,
LPCM,
ADPCM, AAC, HE-AAC
JPEG
LPCM, ADPCM
asf, wmv
VC1
WMA
flv
Sorenson H.263, H264
MP3, AAC
(avi, mp4, mkv)
MY MEDIA
Motion JPEG
MP2, MP3, Dolby Digital, AAC
(Only Motion JPEG
640x480@30p)
81
PHOTO LIST
The On-Screen Display on your model may be slightly different.
Supported photo file: *.JPG
ᯍ Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)
ᯍ Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height)
ᯍ You can play JPEG files only.
ᯍ Non-supported files are displayed in the form of predefined icon.
Screen Components
MENU
Select MY MEDIA.
ENTER
ENTER
Select Photo List.
Moves to upper level folder
Current page/total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
MY MEDIA
Page 1/1
Photo List
USB 1 XTICK
1.EMF
Page 1/1
Drive1
10_1_Top 100
BBB723
20090711
20090810
200942_Top100
20091010
20091011
Basic Test Kit
(QWDO
FHD
HD
MV
Photo
ᯒMove
ᯕ7R0XVLF/LVW
ᯕ&KDQJH1XPEHUV
TS
ᯙ9LHZ᱇3DJH&KDQJH᱅ Mark
ᯕ0DUN0RGH
á°ż Exit
GREEN
Move to Music List or Movie List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
87
MUSIC LIST
This TV cannot play back copy-protected files.
The On-Screen Display on your model may be slightly different.
MUSIC (*.MP3) supporting file
Bit rate 32 Kbps - 320 Kbps
ĹŁ
4BNQMJOH
SBUF
.1&(
-BZFS

L)[ 

L)[ 

L)[
ĹŁ
4BNQMJOH
SBUF
.1&(
-BZFS

L)[ 

L)[ 

L)[
ĹŁ
4BNQMJOH
SBUF
.1&(
-BZFS

L)[ 

L)[ 

L)[
MENU
Select MY MEDIA.
ENTER
ENTER
Select Music List.
Preview: If any album jacket for
the file (Album Art Image)
exists, this picture is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
MY MEDIA
Screen Components
Page 1/1
Music List
Drive1
USB 1 XTICK
'LHW IHDW PS
00:00
Page 1/1
0DG IHDW PS
00:00
)LUHPS
00:00
0HORG\PS
00:00
*LIWPS
00:00
ᯒMove
ᯕ7R0RYLH/LVW
ᯕ&KDQJH1XPEHUV
ᯙ3OD\᱇3DJH&KDQJH᱅ Mark
ᯕ0DUN0RGH
á°ż Exit
GREEN
Move to Movie List or Photo List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen (Refer to p. 104).
(It's available "ENERGY SAVING - Off, Screen Off" only.)
93
*This feature is not available for all models.
ᯍ
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The picture is improved by making bright parts brighter and
dark parts darker.
ᯍ
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue and green
white look more vivid.
Skin Color
ᯍ
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
ᯍ
Reduces screen noise without compromising video quality.
Digital Noise
Reduction
ᯍ
Removes noise caused by compressing video.
Dynamic Contrast
Dynamic Color
Gamma
You can adjust brightness of dark areas and middle gray level areas of the
picture.
Low : Make brighter and middle gray level areas of the picture brighter.
Medium : Express original picture levels.
High: Make dark and middle gray level areas of the picture darker.
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
ᯍ Set black level of the screen to proper level.
ᯍ This function is available in the following modes: AV (NTSC-M), HDMI or
Component.
Clear White
ᯍ
Make the white area of screen brighter and more white.
ᯍ
Adjust the brightness of the screen to prevent the screen from being too
bright. Dims extremely bright pictures.
This feature is enabled in “Picture Mode-Standard, Sports, Game”.
ᯍ
ᯍ
ᯍ
ᯍ
Real Cinema
ᯍ
PICTURE CONTROL
Eye Care
Makes video clips recorded in film look more natural by eliminating judder
effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps). With
LG Real Cinema, every frame is consistently processed 5 times in 1/24 of
a second producing 120 fps with TruMotion or 2 times in 1/24 of a second
producing 48 fps without TruMotion, thus totally eliminating the judder
effect.
This function can also work when TruMotion is off.
Advanced Control
ᯍ Maximize the utilization of colors to increase color quality.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
Color Gamut
LED LCD TV/LCD TV: Expert Control
Displays color domain of the signal.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
EBU: Mode to display EBU standard color area.
SMPTE: Mode to display SMPTE standard color area.
BT709: Mode to display BT709 standard color area.
ᯍ
109
PICTURE CONTROL
ᯍ
Edge Enhancer
ᯍ
ᯍ
xvYCC
ᯍ
ᯍ
Color Filter
Expert Pattern
Show clearer and distinctive yet natural edges in of the video.
This function is enabled in "Picture Mode - Expert".
This is produces richer colors.
This feature represents rich color as much as conventional video signal.
This function is enabled in "Picture Mode - Cinema, Expert" when a xvYCC
signal is inputted through HDMI.
ᯍ
This function filters specific colors in the video.
You can use the RGB filter to set color saturation and hue accurately.
ᯍ
This is a pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
ᯍ
Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
c. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
- Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, then the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
ᯍ
PICTURE CONTROL
Color Temperature
A tool used by the experts to make adjustments by using the test patterns,
this does not affect other colors but can be used to selectively adjust the
6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is
-30 - +30.
- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30
- +30.
- This feature is disabled in RGB-PC and HDMI-PC mode.
ᯍ
Color Management
System
110
APPENDIX
APPENDIX
TROUBLESHOOTING
Abnormal Operation
ᯍ
The remote control
doesn’t work
ᯍ
ᯍ
ᯍ
ᯍ
TV turns off suddenly
ᯍ
ᯍ
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
*This feature is not available for all models.
Install new batteries.
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes.
Video Problems
ᯍ
ᯍ
No picture &No sound
ᯍ
ᯍ
ᯍ
Picture appears slowly
after switching on
APPENDIX
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
ᯍ
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
ᯍ
ᯍ
ᯍ
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks in pictures
No picture when connecting HDMI
142
ᯍ
ᯍ
No or poor color or
poor picture
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
ᯍ
Check for local interference such as an electrical appliance or power
tool.
ᯍ
ᯍ
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
ᯍ
Check antenna (Change the direction of the antenna).
ᯍ
Check HDMI cable over version 1.3.
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no
screen display. In this case use the latest cables that support HDMI version 1.3.
ᯍ
Audio Problems
No output from one
of the speakers
Unusual sound from
inside the product
No sound
when connecting
HDMI/USB
ᯍ
Adjust Balance in menu option.
ᯍ
A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault
with the product.
ᯍ
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
*This feature is not available for all models.
Use normal MP3 file.
ᯍ
ᯍ
PC Mode Problems
The signal is out of
range
Vertical bar or stripe
on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable or single color
ᯍ
Adjust resolution, horizontal frequency, or vertical frequency on the PC.
Check the input source.
ᯍ
Activate the Auto configure feature or adjust size, phase, or H/V position.
(Option)
ᯍ
Check the signal cable.
Reinstall the PC video card.
ᯍ
ᯍ
Check the manual for the video card in the PC to see if it supports
HDMI audio and how to set it up properly.
APPENDIX
When connecting the
HDMI cable to the PC,
there is no audio.
ᯍ
143
APPENDIX
Movie List Problems
The file does not
appear on the Movie
List.
Message is displayed
saying “This file is
invalid” or the audio is
working normally but
the video is not working normally.
Message is displayed
saying “Unsupported
Audio” or the video is
working normally but
the audio is not working normally.
ᯍ
Check whether the file extension is supported.
ᯍ
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the resolution is supported.
Check whether the video/audio codec is supported.
Check whether the frame rate is supported.
ᯍ
ᯍ
ᯍ
ᯍ
ᯍ
ᯍ
ᯍ
ᯍ
ᯍ
Subtitle is not working.
ᯍ
ᯍ
ᯍ
APPENDIX
144
Check whether the
file is damaged.)
Check whether the
Check whether the
Check whether the
file is playing normally on a PC. (Check whether the
audio codec is supported.
bit rate is supported.
sample rate is supported.
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the video file and subtitle file name are the same.
Check whether the video file and subtitle file are located in the same
folder.
Check whether the subtitle file is supported.
Check whether the language is supported. (When you open the subtitle
file on a PC, you can check the language of the subtitle file.)
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you
can enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s
almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
ᯍ
ᯍ
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
ŹIf you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
APPENDIX
145
APPENDIX
PRODUCT SPECIFICATIONS
19LE5300 (19LE5300-UE)
22LE5300 (22LE5300-UE)
22LE5500 (22LE5500-UA)
With stand
471.2 mm x 365.9 mm x 155.4 mm
(18.5 inch x 14.4 inch x 6.1 inch)
542.9 mm x 407.1 mm x 155.4 mm
(21.3 inch x 16.0 inch x 6.1 inch)
Without stand
471.2 mm x 315.5 mm x 34.4 mm
(18.5 inch x 12.4 inch x 1.3 inch)
542.9 mm x 357.6 mm x 34.4 mm
(21.3 inch x 14.0 inch x 1.3 inch)
With stand
3.4 kg (7.4 lbs)
4.2 kg (9.2 lbs)
Without stand
3.2 kg (7.0 lbs)
3.9 kg (8.5 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
With stand
652.0 mm x 480.8 mm x 191.4 mm
(25.6 inch x 18.9 inch x 7.5 inch)
Without stand
652.0 mm x 420.3 mm x 34.4 mm
(25.6 inch x 16.5 inch x 1.3 inch)
With stand
6.1 kg (13.4 lbs)
Without stand
5.1 kg (11.2 lbs)
Power Requirement
Adapter (DC Power)
APPENDIX
146
19LE5300: 24V
22LE5300: 24V
26LE5300: 24V
, 1.6A
, 1.7 A
, 1.8 A
In: AC100-240 V ~ 50/60 Hz
Out: DC 24 V, 3.42 A
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
75 Ί
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
ᯍ
26LE5300 (26LE5300-UE)
26LE5500 (26LE5500-UA)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
32LE5300
(32LE5300-UC)
37LE5300
(37LE5300-UC)
With stand
784.6 mm x 558.1 mm x 221.0 mm
(30.8 inch x 21.9 inch x 8.7 inch)
905.0 mm x 630.0 mm x 270.0 mm
(35.6 inch x 24.8 inch x 10.6 inch)
Without stand
784.6 mm x 499.5 mm x 39.9 mm
(30.8 inch x 19.6 inch x 1.5 inch)
905.0 mm x 568.0 mm x 39.9 mm
(35.6 inch x 22.3 inch x 1.5 inch)
With stand
12.6 kg (27.7 lbs)
15.3 kg (33.7 lbs)
Without stand
10.5 kg (23.1 lbs)
11.8 kg (26.0 lbs)
42LE5300
(42LE5300-UC)
47LE5300
(47LE5300-UC)
With stand
1016.0 mm x 692.0 mm x 270.0 mm
(40.0 inch x 27.2 inch x 10.6 inch)
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
Without stand
1016.0 mm x 630.0 mm x 29.3 mm
(40.0 inch x 24.8 inch x 1.1 inch)
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
With stand
19.5 kg (42.9 lbs)
22.6 kg (49.8 lbs)
Without stand
16.7 kg (36.8 lbs)
19.6 kg (43.2 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
1306.0 mm x 867.0 mm x 345.0 mm
(51.4 inch x 34.1 inch x 13.5 inch)
1306.0 mm x 797.0 mm x 30.7 mm
(51.4 inch x 31.3inch x 1.2 inch)
With stand
34.05 kg (75.0 lbs)
Without stand
28.8 kg (63.4 lbs)
AC 120 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
75 Ί
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
APPENDIX
Power Requirement
ᯍ
55LE5300
(55LE5300-UC)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
147
APPENDIX
42LE7300
(42LE7300-UA)
47LE7300
(47LE7300-UA)
1009.2 mm x 694.5 mm x 286.5 mm
(39.7 inch x 27.3 inch x 11.2 inch)
1119.6 mm x 757.1 mm x 286.5 mm
(44.0 inch x 29.8 inch x 11.2 inch)
1009.2 mm x 629.7 mm x 29.3 mm
(39.7 inch x 24.7 inch x 1.1 inch)
1119.6 mm x 691.3 mm x 29.3 mm
(44.0 inch x 27.2 inch x 1.1 inch)
With stand
25.5 kg (56.2 lbs)
29.7 kg (65.4 lbs)
Without stand
21.0 kg (46.2 lbs)
25.2 kg (55.5 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
With stand
1305.2 mm x 871.4 mm x 320.2 mm
(51.3 inch x 34.3 inch x 12.6 inch)
Without stand
1305.2 mm x 799.4 mm x 32.4 mm
(51.3 inch x 31.4 inch x 1.2 inch)
With stand
43.0 kg (94.8 lbs)
Without stand
36.7 kg (80.9 lbs)
Power requirement
AC 120 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
APPENDIX
148
Operating Temperature
75 Ί
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
ᯍ
55LE7300
(55LE7300-UA)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
IR CODE
Code Function
Note
Code
(Hexa)
Function
Note
(Hexa)
00
CH ᰜ
Remote Control Button
B0
á°Ś
Remote Control Button
01
CH ᰝ
Remote Control Button
B1
á°§
Remote Control Button
02
VOL +
Remote Control Button
BA
á°¨
Remote Control Button
03
VOL -
Remote Control Button
D6
TV
Discrete IR Code
06
Remote Control Button
07
Remote Control Button
08
C4
POWER ON
Remote Control Button
(Power On/Off)
09
MUTE
Remote Control Button
0B
INPUT
Remote Control Button
0F
TV
Remote Control Button
10-19
Number 0-9
Remote Control Button
FLASHBK
Remote Control Button
1E
FAV/MARK
Remote Control Button
28
BACK
Remote Control Button
30
AV MODE
Remote Control Button
40
ᰜ
Remote Control Button
41
ᰝ
Remote Control Button
43
MENU
Remote Control Button
44
ENTER
Remote Control Button
45
Q.MENU
Remote Control Button
4C
- (Dash)/LIST
Remote Control Button
5B
EXIT
Remote Control Button
61
BLUE
Remote Control Button
63
YELLOW
Remote Control Button
71
GREEN
Remote Control Button
72
RED
Remote Control Button
79
RATIO
Remote Control Button
7E
SIMPLINK
Remote Control Button
8E
á°Š
Remote Control Button
8F
á°Ş
Remote Control Button
95
ENERGY SAVING Remote Control Button
AA
INFO
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
(Only Power Off)
5A
AV or AV1
Discrete IR Code
D0
AV2
Discrete IR Code
BF
COMPONENT
Discrete IR Code
(AV1 Input Selection)
(AV2 Input Selection)
(Component Input Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
CE
HDMI1
Discrete IR Code
(HDMI1 Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
E9
HDMI3
Discrete IR Code
DA
HDMI4
Discrete IR Code
(HDMI3 Input Selection)
(HDMI4 Input Selection)
76
Ratio 4:3
Discrete IR Code
APPENDIX
1A
ᯍ
(TV Input Selection)
(Only 4:3 Mode)
77
Ratio 16:9
Discrete IR Code
(Only 16:9 Mode)
AF
Ratio Zoom
Discrete IR Code
(Only Zoom Mode)
Remote Control Button
Use this feature depending on your models.
151
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as
a computer or an A/V control system) to control the TV’s functions externally.
ᯍ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and
software.
The instructions below are provided to help with programming software or to test functionality using
telenet software.
RS-232C Setup
DC-IN
/DVI IN
i.e)
(DVI)
RS-232C IN
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
PB
VIDEO
PR
AUDIO
COMPONENT IN
ANTENNA/
CABLE IN
PC
Type of Connector; D-Sub 9-Pin Male
No.
APPENDIX
152
Communication Parameters
Baud rate : 9600 bps (UART)
ᯍ Data length : 8 bits
ᯍ Parity : None
ᯍ Stop bit : 1 bit
ᯍ Communication code : ASCII code
ᯍ Use a crossed (reverse) cable.
ᯍ
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
! NOTE
ĹšThis product has command echo back in
the RS-232C Command.
No Connection
RS-232C Configurations
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
TV
RXD
TXD
GND
DTR
DSR
RTS
CTS
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
PC
TV
RXD
TXD
GND
DTR
DSR
RTS
CTS
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
237,21
ᯒ0RYHᯙ(QWHU
ؒ /DQJXDJH
ؒ &DSWLRQ
237,21
ᯒ0RYHᯙ(QWHU
ؒ /DQJXDJH
2II
ؒ &DSWLRQ
ؒ 3RZHU,QGLFDWRU
2II
ؒ 3RZHU,QGLFDWRU
ؒ ,QLWLDO6HWWLQJ
ؒ ,QLWLDO6HWWLQJ
ؒ 6HW,'

ؒ 0RGH6HWWLQJ
+RPH8VH
ᯙ
ᯐ
‫۽܁‬
ؒ 6HW,'

ؒ 0RGH6HWWLQJ
+RPH8VH
&ORVH
ᯍ
MENU
ENTER
ENTER
BACK
EXIT
Select OPTION.
Real data mapping
Step 0
Step 10 (Set ID 10)
Step 15 (Set ID 15)
10
Step 16 (Set ID 16)
63
Step 99 (Set ID 99)
64
Step 100
APPENDIX
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is
1~ 99.
Return to the previous menu.
Return to TV viewing.
153
APPENDIX
Command Reference List
COMMAND2
DATA
(Hexadecimal)
01. Power
00 - 01
02. Input Select
Ĺš P.155
k, m or x)
03. Aspect Ratio
Ĺš P.155
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set. (j,
APPENDIX
07. Contrast
00 - 64
08. Brightness
00 - 64
09. Color
00 - 64
10. Tint
00 - 64
11. Sharpness
00 - 64
12. OSD Select
00 - 01
13. Remote
Control Lock
Mode
00 - 01
14. Treble
00 - 64
[Command 2] : Second command to control the
set.
[Set ID] : You can adjust the set ID to choose
desired TV ID number in Setup menu.
Adjustment range is 1-99. When selecting
Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal
(1-99) on menu and as Hexa decimal (0x0
- 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of
command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the
standby mode.
15. Bass
00 - 64
OK Acknowledgement
16. Balance
00 - 64
17. Color
Temperature
00 - 64
18. Energy Saving j
Ĺš P.156
19. Auto
Configuration
Ĺš P.156
21. Channel Add/
Del
00 - 01
22. Key
Ĺš P.157
23. Backlight
00 - 64
04. Screen Mute
00 - 01
05. Volume Mute
00 - 01
06. Volume
Control
00 - 64
COMMAND1
20.
Channel
Tuning
154
Transmission / Receiving Protocol
COMMAND1
COMMAND2
DATA00
(Hexadecimal)
DATA01
(Hexadecimal)
physical
program
high
major
program
low
DATA02
(Hexadecimal)
DATA03
(Hexadecimal)
DATA04
(Hexadecimal)
DATA05
(Hexadecimal)
major low
minor
high
minor low
attribute
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[NG] : Use the large character
05. Volume Mute (Command: k e)
01.Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command: x b)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
To select input source for TV.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Data 20: AV or AV1
Data 21: AV 2
07. Contrast (Command: k g)
Data 40: Component
Data 60: RGB-PC
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Data 93: HDMI4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
* Use the feature depending on your model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Data 01: 4:3
Data 09: Just scan
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data 02: 16:9
Data 10: Cinema Zoom1
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 1F: Cinema Zoom16
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Data 04: Zoom
Data 05: Zoom2
Data 06: Set by program
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d)
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
To select screen mute on/off.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 00: Screen mute off (Picture on), Video-out Mute off
Data 01: Screen mute on (Picture off)
APPENDIX
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute
on, TV will not display On Screen Display (OSD).
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 - Green: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
155
APPENDIX
11. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command: x u)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
18. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn
on by POWER button of remote control and on the
TV.
Data 00: Energy saving - off
01: Energy saving - Minimum
02: Energy saving - Medium
03: Energy saving - Maximum
04: Energy saving - Auto (depending on model)
05: Energy saving - Screen off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
19. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in
RGB-PC mode.
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
APPENDIX
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
20. Channel Tuning (Command: m a)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
156
Data 01: To set
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
To tune channel to following physical/major/minor number.
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel to the Major number, the Physical
number is not required when sending a command.
Data 00: Physical Channel Number
NTSC air: 02 - 45, NTSC cable: 01, 0E - 7D
ATSC air: 01 - 45, ATSC cable: 01 - 87
Data 01 & 02: Major Channel Number
Data 01: High byte
Data 02: Low byte
Two bytes are available for the Major and Minor,
normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
Data5: 7
Reserved
][Set ID][ Step
][OK][Data00]
3 Acknowledgement[a][
[Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ]
[NG][Data00][x]
Main/Sub
Picture
Two/One Part
Channel
Using Physical
Channel
0 Main
0 Two
0 Use
NTSC Air
1 Sub
1 One
1 No Use
NTSC Cable
ATSC Air
ATSC Cable_std
ATSC Cable_hrc
ATSC Cable_irc
ATSC cable_auto
Reserved
...
Reserved
The table above lists the binary code which must be
converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an
NTSC cable channel is “1000 0001”, which translates
to “81” in Hex.
* 7th bit : For which source do you want to change the
channel.
* 6th bit: Use a two part or one part channel. Most
cases just use 0 since it’s ignored when using
NTSC.
* 5th bit: Use 0 with NTSC since it can only use the
physical channel number. Normally use 1 for ATSC
since most times it doesn’t matter what the physical
number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
1. Tune to the analog (NTSC) cable channel 35.
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel DeleteData 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
22. Key (Command: m c)
To send IR remote control code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
See page 151.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by
POWER button of remote control only.
23. Backlight (Command: m g)
To adjust screen backlight.
Data 00 = Physical of 35 = 23
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data 01 & 02 = No Major = 00 00
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
Data 03 & 04 = No Minor = 00 00
*Refer to ‘Real data mapping’.
Data 05 = 0000 0001 in binary = 01
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
*Tune Command Examples:
21. Channel Add/Del (Command: m b)
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
157
APPENDIX
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software - to make sure the
software is free for all its users. This General Public License
applies to most of the Free Software Foundation's software
and to any other program whose authors commit to using
it. (Some other free software foundation software is covered by the GNU Lesser General Public License instead.)
You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that
you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it.
APPENDIX
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to
make certain that everyone understands that there is no
warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients to
know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent
this, we have made it clear that any patent must be
158
licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution
and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This license applies to any program or other work which
contains a notice placed by the copyright holder saying
it may be distributed under the terms of this General
Public License. The "Program", below, refers to any such
program or work, and a "work based on the Program"
means either the Program or any derivative work under
copyright law: that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as
"you".
Activities other than copying, distribution and modification are not covered by this license; they are outside its
scope. The act of running the Program is not restricted,
and the output from the program is covered only if its
contents constitute a work based on the program (independent of having been made by running the program).
Whether that is true depends on what the program
does.
1. You may copy and distribute verbatim copies of the
program's source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that
refer to this license and to the absence of any warranty;
and give any other recipients of the program a copy of
this license along with the Program.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the program or
any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or
work under the terms of section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files to carry prominent
notices stating that you changed the files and the
date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived
from the Program or any part there of, to be licensed
as a whole at no charge to all third parties under the
terms of this license.
c) If the modified program normally reads commands
interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that
there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under these conditions, and telling the user
how to view a copy of this license. (Exception: if the
Program itself is interactive but does not normally
print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably considered independent and separate works in themselves,
then this license, and its terms, do not apply to those
sections when you distribute them as separate works.
But when you distribute the same sections as part of a
whole which is a work based on the Program, the distribution of the whole must be on the terms of this license,
whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless
of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the program.
3. You may copy and distribute the program (or a work
based on it, under section 2) in object code or executable form under the terms of sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of sections 1 and 2 above
on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least
three years, to give any third party, for a charge no
more than your cost of physically performing source
distribution, a complete machine-readable copy of
the corresponding source code, to be distributed
under the terms of sections 1 and 2 above on a
medium customarily used for software interchange;
or,
The source code for a work means the preferred form of
the work for making modifications to it. For an executable work, complete source code means all the source
code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control
compilation and installation of the executable. However,
as a special exception, the source code distributed need
not include anything that is normally distributed (in
either source or binary form) with the major components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by
offering access to copy from a designated place, then
offering equivalent access to copy the source code from
the same place counts as distribution of the source
code, even though third parties are not compelled to
copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this license.
Any attempt otherwise to copy, modify, sublicense or
distribute the Program is void, and will automatically
terminate your rights under this license. However, parties who have received copies, or rights, from you under
this license will not have their licenses terminated so
long as such parties remain in full compliance.
5. You are not required to accept this license, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if
you do not accept this license. Therefore, by modifying
or distributing the program (or any work based on the
program), you indicate your acceptance of this license
to do so, and all its terms and conditions for copying,
distributing or modifying the program or works based
on it.
APPENDIX
In addition, mere aggregation of another work not
based on the program with the Program (or with a work
based on the program) on a volume of a storage or
distribution medium does not bring the other work
under the scope of this license.
c) Accompany it with the information you received as to
the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial
distribution and only if you received the program in
object code or executable form with such an offer, in
accord with Subsection b above.)
6. Each time you redistribute the program (or any work
based on the Program), the recipient automatically
receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms
and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted
herein. You are not responsible for enforcing compliance
by third parties to this license.
159
APPENDIX
7. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that
contradict the conditions of this license, they do not
excuse you from the conditions of this license. If you
cannot distribute so as to satisfy simultaneously your
obligations under this license and any other pertinent
obligations, then as a consequence you may not distribute the program at all. For example, if a patent license
would not permit royalty-free redistribution of the program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this license would be to refrain entirely from
distribution of the program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of
the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot impose
that choice.
APPENDIX
This section is intended to make thoroughly clear what
is believed to be a consequence of the rest of this
license.
8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who
places the program under this license may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this
license incorporates the limitation as if written in the
body of this license.
9. The Free Software Foundation may publish revised and/
or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If
160
the program specifies a version number of this license
which applies to it and "any later version", you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation. If the program does not specify a
version number of this license, you may choose any version ever published by the Free Software Foundation.
10.If you wish to incorporate parts of the program into
other free programs whose distribution conditions are
different, write to the author to ask for permission. For
software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY
AND
FITNESS
FOR
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to apply these terms to your new programs
If you develop a new program, and you want it to be of the
greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is
safest to attach them to the start of each source file to
most effectively convey the exclusion of warranty; and each
file should have at least the "copyright" line and a pointer
to where the full notice is found.
one line to give the program's name and a brief idea of
what it does.
Copyright (C)  
This program is free software; you can redistribute it and/
or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation;
either version 2 of the license, or (at your option) any later
version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General
Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic
and paper mail.
If the program is interactive, make it output a short notice
like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY;
for details type ‘show w’. This is free software, and you are
welcome to redistribute it under certain conditions; type
‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should
show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they could even be
mouse-clicks or menu items-whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
program ‘Gnomovision’ (which makes passes at compilers)
written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
APPENDIX
This General Public License does not permit incorporating
your program into proprietary programs. If your program is
a subroutine library, you may consider it more useful to
permit linking proprietary applications with the library. If
this is what you want to do, use the GNU Lesser General
Public License instead of this license.
161
APPENDIX
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also
counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your
freedom to share and change free software - to make sure
the software is free for all its users.
This license, the Lesser General Public License, applies to
some specially designated software packages - typically
libraries - of the Free Software Foundation and other
authors who decide to use it. You can use it too, but we
suggest you first think carefully about whether this license
or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
APPENDIX
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service
if you wish); that you receive source code or can get it if you
want it; that you can change the software and use pieces
of it in new free programs; and that you are informed that
you can do these things.
To protect your rights, we need to make restrictions that
forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether
gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too,
receive or can get the source code. If you link other code
with the library, you must provide complete object files to
the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And
you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
162
To protect each distributor, we want to make it very clear
that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the
recipients should know that what they have is not the
original version, so that the original author's reputation will
not be affected by problems that might be introduced by
others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent
holder. Therefore, we insist that any patent license obtained
for a version of the library must be consistent with the full
freedom of use specified in this license.
Most GNU software, including some libraries, is covered by
the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain
libraries in order to permit linking those libraries into nonfree programs.
When a program is linked with a library, whether statically
or using a shared library, the combination of the two is
legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore
permits such linking only if the entire combination fits its
criteria of freedom. The Lesser General Public License
permits more lax criteria for linking other code with the
library.
We call this license the "Lesser" General Public License
because it does Less to protect the user's freedom than
the ordinary General Public License. It also provides other
free software developers Less of an advantage over competing non-free programs. These disadvantages are the
reason we use the ordinary General Public License for
many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special
need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To achieve
this, non-free programs must be allowed to use the library.
A more frequent case is that a free library does the same
job as widely used non-free libraries. In this case, there is
little to gain by limiting the free library to free software only,
so we use the Lesser General Public License.
In other cases, permission to use a particular library in nonfree programs enables a greater number of people to use
a large body of free software. For example, permission to
use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as
well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and
the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution
and modification follow. Pay close attention to the difference between a "work based on the library" and a "work
that uses the library". The former contains code derived
from the library, whereas the latter must be combined with
the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This license agreement applies to any software library or
other program which contains a notice placed by the
copyright holder or other authorized party saying it may
be distributed under the terms of this Lesser General
Public License (also called “this license”). Each license
is addressed as "you".
A “library” means a collection of software functions
and/or data prepared so as to be conveniently linked
with application programs (which use some of those
functions and data) to form executables.
“Source code” for a work means the preferred form of
the work for making modifications to it. For a library,
complete source code means all the source code for all
modules it contains, plus any associated interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not covered by this license; they are outside its
scope. The act of running a program using the Library
is not restricted, and output from such a program is
covered only if its contents constitute a work based on
the library (independent of the use of the Library in a
tool for writing it). Whether that is true depends on what
the library does and what the program that uses the
library does.
1. You may copy and distribute verbatim copies of the
library's complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright
notice and disclaimer of warranty; keep intact all the
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the
Library, and copy and distribute such modifications or
work under the terms of section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent
notices stating that you changed the files and the
date of any change.
c) You must cause the whole of the work to be licensed
at no charge to all third parties under the terms of
this license.
d) If a facility in the modified Library refers to a function
or a table of data to be supplied by an application
program that uses the facility, other than as an argument passed when the facility is invoked, then you
must make a good faith effort to ensure that, in the
event an application does not supply such function or
table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square
roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d
requires that any application-supplied function or table
used by this function must be optional: if the application
does not supply it, the square root function must still
compute square roots.)
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not
derived from the library, and can be reasonably considered independent and separate works in themselves,
then this license, and its terms, do not apply to those
sections when you distribute them as separate works.
But when you distribute the same sections as part of a
whole which is a work based on the library, the distribution of the whole must be on the terms of this license,
whose permissions for other licenses extend to the
entire whole, and thus to each and every part regardless
of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of derivative or collective works based on the library.
APPENDIX
The “Library”, below, refers to any such software library or
work which has been distributed under these terms. A
“work based on the Library” means either the Library or
any derivative work under copyright law: that is to say, a
work containing the library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term “modification”.)
notices that refer to this license and to the absence of
any warranty; and distribute a copy of this license along
with the Library.
In addition, mere aggregation of another work not based
on the library with the library (or with a work based on
the library) on a volume of a storage or distribution
medium does not bring the other work under the scope
of this license.
163
APPENDIX
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a given
copy of the Library. To do this, you must alter all the
notices that refer to this License, so that they refer to the
ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of
the ordinary GNU General Public License has appeared,
then you can specify that version instead if you wish.) Do
not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public
License applies to all subsequent copies and derivative
works made from that copy.
This option is useful when you wish to copy part of the
code of the library into a program that is not a library.
4. You may copy and distribute the library (or a portion or
derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of sections 1 and 2
above on a medium customarily used for software interchange.
If distribution of object code is made by offering access
to copy from a designated place, then offering equivalent access to copy the source code from the same
place satisfies the requirement to distribute the source
code, even though third parties are not compelled to
copy the source along with the object code.
5. A program that contains no derivative of any portion of
the Library, but is designed to work with the Library by
being compiled or linked with it, is called a “work that
uses the Library”. Such a work, in isolation, is not a
derivative work of the Library, and therefore falls outside
the scope of this license.
APPENDIX
However, linking a “work that uses the library” with the
Library creates an executable that is a derivative of the
Library (because it contains portions of the library),
rather than a “work that uses the library”. The executable
is therefore covered by this license. Section 6 states
terms for distribution of such executable.
When a “work that uses the library” uses material from
a header file that is part of the library, the object code
for the work may be a derivative work of the library even
though the source code is not.
Whether this is true is especially significant if the work
can be linked without the library, or if the work is itself a
library. The threshold for this to be true is not precisely
defined by law.
If such an object file uses only numerical parameters,
data structure layouts and accessories, and small macros and small inline functions (ten lines or less in
length), then the use of the object file is unrestricted,
regardless of whether it is legally a derivative work.
(Executable containing this object code plus portions of
164
the library will still fall under Section 6.)
Otherwise, if the work is a derivative of the library, you
may distribute the object code for the work under the
terms of Section 6. Any executable containing that work
also fall under Section 6, whether or not they are linked
directly with the library itself.
6. As an exception to the sections above, you may also
combine or link a "work that uses the library" with the
library to produce a work containing portions of the
library, and distribute that work under terms of your
choice, provided that the terms permit modification of
the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the
work that the library is used in it and that the Library and
its use are covered by this license. You must supply a
copy of this license. If the work during execution displays copyright notices, you must include the copyright
notice for the library among them, as well as a reference
directing the user to the copy of this license. Also, you
must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the library
including whatever changes were used in the work
(which must be distributed under Sections 1 and 2
above); and, if the work is an executable linked with
the Library, with the complete machine-readable
“work that uses the Library”, as object code and/or
source code, so that the user can modify the library
and then relink to produce a modified executable
containing the modified library. (It is understood that
the user who changes the contents of definitions files
in the library will not necessarily be able to recompile
the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking
with the library. A suitable mechanism is one that (1)
uses at run time a copy of the library already present
on the user’s computer system, rather than copying
library functions into the executable, and (2) will operate properly with a modified version of the library, if the
user installs one, as long as the modified version is
interface-compatible with the version that the work
was made with.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6, above, for a charge no
more than the cost of performing this distribution.
d) If distribution of the work is made by offering access
to copy from a designated place, offer equivalent
access to copy the above specified materials from
the same place.
e) Verify that the user has already received a copy of
these materials or that you have already sent this user
a copy.
For an executable, the required form of the "work that
uses the library" must include any data and utility programs needed for reproducing the executable from it.
However, as a special exception, the materials to be
distributed need not include anything that is normally
distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless
that component itself accompanies the executable.
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that do
not normally accompany the operating system. Such a
contradiction means you cannot use both them and the
library together in an executable that you distribute.
7. You may place library facilities that are a work based on
the library side-by-side in a single library together with
other library facilities not covered by this license, and
distribute such a combined library, provided that the
separate distribution of the work based on the Library
and of the other library facilities is otherwise permitted,
and provided that you do these two things:
a) Accompany the combined library with a copy of the
same work based on the Library, uncombined with
any other library facilities. This must be distributed
under the terms of the sections above.
b) Give prominent notice with the combined library of
the fact that part of it is a work based on the library,
and explaining where to find the accompanying
uncombined form of the same work.
9. You are not required to accept this license, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the library or its
derivative works. These actions are prohibited by law if
you do not accept this license. Therefore, by modifying
or distributing the library (or any work based on the
library), you indicate your acceptance of this license to do
so, and all its terms and conditions for copying, distributing or modifying the library or works based on it.
10.Each time you redistribute the library (or any work based
on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link
with or modify the library subject to these terms and
conditions. You may not impose any further restrictions
on the recipients' exercise of the rights granted herein.
11. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that
contradict the conditions of this license, they do not
excuse you from the conditions of this license. If you
cannot distribute so as to satisfy simultaneously your
obligations under this license and any other pertinent
obligations, then as a consequence you may not distribute the library at all. For example, if a patent license
would not permit royalty-free redistribution of the library
by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it
and this license would be to refrain entirely from distribution of the library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of
the section is intended to apply, and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a license cannot impose
that choice.
This section is intended to make thoroughly clear what
is believed to be a consequence of the rest of this
license.
12. If the distribution and/or use of the library is restricted in
certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the
library under this license may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries
not thus excluded. In such case, this license incorporates
the limitation as if written in the body of this license.
APPENDIX
8. You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under
this license. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the library is void, and
will automatically terminate your rights under this
license. However, parties who have received copies, or
rights, from you under this license will not have their
licenses terminated so long as such parties remain in
full compliance.
You are not responsible for enforcing compliance by
third parties with this license.
13. The Free Software Foundation may publish revised and/
or new versions of the Lesser General Public License
from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If
the library specifies a version number of this license
which applies to it and “any later version”, you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation.
165
APPENDIX
If the library does not specify a license version number,
you may choose any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the library into other
free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software
and of promoting the sharing and reuse of software
generally.
NO WARRANTY
15.BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
APPENDIX
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to apply these terms to your new libraries
If you develop a new library, and you want it to be of the
greatest possible use to the public, we recommend making
166
it free software that everyone can redistribute and change.
You can do so by permitting redistribution under these
terms (or, alternatively, under the terms of the ordinary
General Public License).
To apply these terms, attach the following notices to the
library. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line
and a pointer to where the full notice is found.
one line to give the library's name and a brief idea of what
it does.
Copyright (C)  
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General
Public License as published by the Free Software
Foundation; either version 2.1 of the license, or (at your
option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.
You should have received a copy of the GNU Lesser
General Public License along with this library; if not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic
and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library ‘Frob’ (a library for tweaking knobs) written by James
Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
MOZILLA PUBLIC LICENSE
Version 1.1
--------------which, at the time of its release under this license is
not already covered code governed by this license.
1.Definitions.
1.0.1. “Commercial use” means distribution or otherwise
making the covered code available to a third party.
1.1.
“Contributor” means each entity that creates or contributes to the creation of modifications.
1.2.
“Contributor version” means the combination of the
original code, prior modifications used by a contributor, and the modifications made by that particular
contributor.
1.3.
“Covered code” means the original code or modifications or the combination of the original code and
modifications, in each case including portions thereof.
1.4.
“Electronic distribution mechanism” means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.10.1. “Patent claims” means any patent claim(s), now
owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any
patent licensable by grantor.
1.11.
“Source code” means the preferred form of the covered code for making modifications to it, including all
modules it contains, plus any associated interface
definition files, scripts used to control compilation
and installation of an executable, or source code differential comparisons against either the original code
or another well known, available covered code of the
contributor's choice. The source code can be in a
compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.
“Executable” means covered code in any form other
than source code.
1.6.
“Initial developer” means the individual or entity
identified as the initial Developer in the Source Code
notice required by exhibit A.
1.7.
“Larger work” means a work which combines covered
code or portions thereof with code not governed by
the terms of this License.
1.8.
“License” means this document.
2. Source Code License.
1.8.1. “Licensable” means having the right to grant, to the
maximum extent possible, whether at the time of the
initial grant or subsequently acquired, any and all of
the rights conveyed herein.
1.9.
“Modifications” means any addition to or deletion
from the substance or structure of either the original
code or any previous modifications. When covered
code is released as a series of files, a modification is:
A. Any addition to or deletion from the contents of a
file containing original code or previous modifications.
B. Any new file that contains any part of the original
code or previous modifications.
2.1.
The initial developer grant.
The initial developer hereby grants You a world-wide,
royalty-free, non-exclusive license, subject to third
party intellectual property claims:
APPENDIX
1.5.
1.12. “You” (or “Your”) means an individual or a legal
entity exercising rights under, and complying with all
of the terms of, this license or a future version of this
license issued under section 6.1.
For legal entities, “You” includes any entity which
controls, is controlled by, or is under common control
with You. For purposes of this definition, “control”
means (a) the power, direct or indirect, to cause the
direction or management of such entity, whether by
contract or otherwise, or (b) ownership of more than
fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
a) under intellectual property rights (other than patent or trademark) licensable by initial developer to
use, reproduce, modify, display, perform, sublicense and distribute the original code (or portions
thereof) with or without modifications, and/or as
part of a larger work; and
(b) under patents claims infringed by the making,
using or selling of original code, to make, have
made, use, practice, sell, and offer for sale, and/
or otherwise dispose of the original code (or portions there of).
1.10. “Original code” means source code of computer
software code which is described in the source code
notice required by exhibit as original code, and
167
APPENDIX
(c) the licenses granted in this section 2.1(a) and (b)
are effective on the date Initial developer first
distributes original code under the terms of this
license.
(d) Notwithstanding section 2.1(b) above, no patent
license is granted: 1) for code that You delete
from the original Code; 2) separate from the
original code; or 3) for infringements caused by:
i) the modification of the original code or ii) the
combination of the original code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims,
each contributor hereby grants You a world-wide,
royalty-free, non-exclusive license
APPENDIX
(a) under intellectual property rights (other than patent or trademark) licensable by contributor, to
use, reproduce, modify, display, perform, sublicense and distribute the modifications created by
such contributor (or portions thereof) either on
an unmodified basis, with other modifications, as
covered code and/or as part of a larger work; and
(b) under patent claims infringed by the making,
using, or selling of modifications made by that
contributor either alone and/or in combination
with its contributor version (or portions of such
combination), to make, use, sell, offer for sale,
have made, and/or otherwise dispose of: 1) modifications made by that contributor (or portions
thereof); and 2) the combination of modifications
made by that contributor with its contributor version (or portions of such combination).
(c) the licenses granted in sections 2.2(a) and 2.2(b)
are effective on the date contributor first makes
commercial use of the covered code.
(d) Notwithstanding section 2.2(b) above, no patent
license is granted: 1) for any code that contributor
has deleted from the contributor version; 2)
separate from the contributor version; 3) for
infringements caused by: i) third party modifications of contributor version or ii) the combination
of modifications made by that contributor with
other software (except as part of the contributor
version) or other devices; or 4) under patent
claims infringed by covered code in the absence
of modifications made by that contributor.
3. Distribution Obligations.
3.1.
168
Application of license.
The modifications which You create or to which you
contribute are governed by the terms of this license,
including without limitation section 2.2. The source
code version of covered code may be distributed
only under the terms of this license or a future version of this license released under section 6.1, and
you must include a copy of this license with every
copy of the source code you distribute. You may not
offer or impose any terms on any source code version that alters or restricts the applicable version of
this license or the recipients' rights hereunder.
However, you may include an additional document
offering the additional rights described in section
3.5.
3.2. Availability of source code.
Any modification which you create or to which you
contribute must be made available in source code
form under the terms of this license either on the
same media as an executable version or via an
accepted electronic distribution mechanism to anyone to whom you made an executable version available; and if made available via electronic distribution
mechanism, must remain available for at least twelve
(12) months after the date it initially became available, or at least six (6) months after a subsequent
version of that particular modification has been
made available to such recipients. You are responsible for ensuring that the source code version remains
available even if the electronic distribution mechanism is maintained by a third party.
3.3. Description of modifications.
You must cause all covered code to which you contribute to contain a file documenting the changes You
made to create that covered code and the date of any
change. You must include a prominent statement that
the modification is derived, directly or indirectly, from
original code provided by the initial developer and
including the name of the initial developer in (a) the
source code, and (b) in any notice in an executable
version or related documentation in which you describe
the origin or ownership of the covered code.
3.4.
Intellectual property matters
(a) Third party claims.
If contributor has knowledge that a license under a
third party's intellectual property rights is required to
exercise the rights granted by such contributor under
sections 2.1 or 2.2, contributor must include a text file
with the source code distribution titled "LEGAL"
which describes the claim and the party making the
claim in sufficient detail that a recipient will know
whom to contact. If contributor obtains such knowledge after the modification is made available as
described in section 3.2, contributor shall promptly
modify the LEGAL file in all copies contributor makes
available thereafter and shall take other steps (such
as notifying appropriate mailing lists or newsgroups)
reasonably calculated to inform those who received
the covered code that new knowledge has been
obtained.
(b) Contributor APIs.
If contributor's modifications include an application
programming interface and contributor has knowledge of patent licenses which are reasonably necessary to implement that API, contributor must also
include this information in the LEGAL file.
code with other code not governed by the terms of
this license and distribute the larger work as a single
product. In such a case, you must make sure the
requirements of this license are fulfilled for the covered code.
(c) Representations.
contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that
contributor's modifications are contributor's original
creation(s) and/or contributor has sufficient rights to
grant the rights conveyed by this license.
3.5. Required notices.
You must duplicate the notice in exhibit A in each file
of the source code. If it is not possible to put such
notice in a particular source code file due to its structure, then You must include such notice in a location
(such as a relevant directory) where a user would be
likely to look for such a notice. If You created one or
more modification(s), you may add your name as a
contributor to the notice described in exhibit A. you
must also duplicate this license in any documentation for the source code where You describe recipients' rights or ownership rights relating to covered
code. You may choose to offer, and to charge a fee
for, warranty, support, indemnity or liability obligations to one or more recipients of covered code.
However, you may do so only on your own behalf, and
not on behalf of the Initial developer or any contributor. You must make it absolutely clear than any such
warranty, support, indemnity or liability obligation is
offered by you alone, and You hereby agree to
indemnify the Initial developer and every contributor
for any liability incurred by the Initial developer or
such contributor as a result of warranty, support,
indemnity or liability terms you offer.
3.7.
5. Application of this license.
This license applies to code to which the initial developer has attached the notice in exhibit A and to
related covered code.
6. Versions of the license.
6.1.
New versions.
Netscape communications corporation (“Netscape”)
may publish revised and/or new versions of the
license from time to time. Each version will be given
a distinguishing version number.
6.2. Effect of new versions.
Once covered code has been published under a
particular version of the license, you may always continue to use it under the terms of that version. You
may also choose to use such covered code under
the terms of any subsequent version of the license
published by netscape. No one other than netscape
has the right to modify the terms applicable to covered code created under this license.
APPENDIX
3.6. Distribution of executable versions.
You may distribute covered code in executable form
only if the requirements of section 3.1-3.5 have been
met for that covered code, and if you include a notice
stating that the source code version of the covered
code is available under the terms of this license,
including a description of how and where you have
fulfilled the obligations of section 3.2. The notice
must be conspicuously included in any notice in an
executable version, related documentation or collateral in which you describe recipients' rights relating
to the covered code. You may distribute the executable version of covered code or ownership rights
under a license of your choice, which may contain
terms different from this license, provided that you
are in compliance with the terms of this license and
that the license for the executable version does not
attempt to limit or alter the recipient's rights in the
source code version from the rights set forth in this
license. If you distribute the executable version under
a different license you must make it absolutely clear
that any terms which differ from this license are
offered by you alone, not by the Initial developer or
any contributor. You hereby agree to indemnify the
initial developer and every contributor for any liability
incurred by the initial developer or such contributor
as a result of any such terms You offer.
4. Inability to comply due to statute or regulation.
If it is impossible for you to comply with any of the
terms of this license with respect to some or all of
the covered code due to statute, judicial order, or
regulation then you must: (a) comply with the terms
of this license to the maximum extent possible; and
(b) describe the limitations and the code they affect.
Such description must be included in the LEGAL file
described in section 3.4 and must be included with
all distributions of the source code. Except to the
extent prohibited by statute or regulation, such
description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it.
6.3. Derivative works.
If You create or use a modified version of this license
(which you may only do in order to apply it to code
which is not already covered code governed by this
license), You must (a) rename Your license so that the
phrases "Mozilla", "MOZILLAPL", "MOZPL",
"Netscape", "MPL", "NPL" or any confusingly similar
phrase do not appear in your license (except to note
that your license differs from this license) and (b)
otherwise make it clear that Your version of the
license contains terms which differ from the Mozilla
Public license and netscape Public License. (Filling in
the name of the initial developer, original code or
contributor in the notice described in exhibit A shall
not of themselves be deemed to be modifications of
this license.)
Larger works.
You may create a larger work by combining covered
169
APPENDIX
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS
LICENSE ON AN “AS IS” BASIS, WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION,
WARRANTIES THAT THE COVERED CODE IS FREE
OF DEFECTS, MERCHANTABLE, FIT FOR A
PARTICULAR PURPOSE OR NON-INFRINGING.
THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE COVERED CODE IS WITH
YOU. SHOULD ANY COVERED CODE PROVE
DEFECTIVE IN ANY RESPECT, YOU (NOT THE
INITIAL
DEVELOPER
OR
ANY
OTHER
CONTRIBUTOR) ASSUME THE COST OF ANY
NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES
AN ESSENTIAL PART OF THIS LICENSE. NO USE
OF ANY COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1.
This license and the rights granted hereunder will
terminate automatically if you fail to comply with
terms herein and fail to cure such breach within 30
days of becoming aware of the breach. All sublicenses to the covered code which are properly
granted shall survive any termination of this license.
Provisions which, by their nature, must remain in
effect beyond the termination of this license shall
survive.
8.2. If you initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions)
against initial developer or a contributor (the initial
developer or contributor against whom you file such
action is referred to as “Participant”) alleging that:
APPENDIX
170
(a) such participant's contributor version directly or
indirectly infringes any patent, then any and all
rights granted by such participant to you under
sections 2.1 and/or 2.2 of this license shall, upon
60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of
notice you either: (i) agree in writing to pay participant a mutually agreeable reasonable royalty for
your past and future use of modifications made
by such participant, or (ii) withdraw your litigation
claim with respect to the contributor version
against such participant. If within 60 days of notice,
a reasonable royalty and payment arrangement
are not mutually agreed upon in writing by the
parties or the litigation claim is not withdrawn, the
rights granted by participant to you under sections 2.1 and/or 2.2 automatically terminate at the
expiration of the 60 day notice period specified
above.
(b) any software, hardware, or device, other than such
participant's contributor Version, directly or indirectly infringes any patent, then any rights grant-
ed to You by such participant under sections
2.1(b) and 2.2(b) are revoked effective as of the
date you first made, used, sold, distributed, or
had made, modifications made by that participant.
8.3. If you assert a patent infringement claim against
participant alleging that such participant's contributor version directly or indirectly infringes any patent
where such claim is resolved (such as by license or
settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the
licenses granted by such participant under sections
2.1 or 2.2 shall be taken into account in determining
the amount or value of any payment or license.
8.4. In the event of termination under sections 8.1 or 8.2
above, all end user license agreements (excluding distributors and resellers) which have been validly
granted by you or any distributor hereunder prior to
termination shall survive termination.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER TORT (INCLUDING
NEGLIGENCE), CONTRACT, OR OTHERWISE,
SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF
COVERED CODE,OR ANY SUPPLIER OF ANY OF
SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY CHARACTER
INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF GOODWILL, WORK STOPPAGE,
COMPUTER FAILURE OR MALFUNCTION, OR ANY
AND ALL OTHER COMMERCIAL DAMAGES OR
LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES. THIS LIMITATION OF LIABILITY SHALL
NOT APPLY TO LIABILITY FOR DEATH OR
PERSONAL INJURY RESULTING FROM SUCH
PARTY'S NEGLIGENCE TO THE EXTENT
APPLICABLE LAW PROHIBITS SUCH LIMITATION.
SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION
AND LIMITATION MAY NOT APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The covered code is a "commercial item," as that
term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such
terms are used in 48 C.F.R. 12.212 (Sept. 1995).
Consistent with 48 C.F.R. 12.212 and 48 C.F.R.
227.7202-1 through 227.7202-4 (June 1995), all
U.S. Government end users acquire covered code
with only those rights set forth herein.
11. MISCELLANEOUS.
This license represents the complete agreement concerning subject matter hereof. If any provision of this
license is held to be unenforceable, such provision
shall be reformed only to the extent necessary to
make it enforceable. This License shall be governed
by California law provisions (except to the extent
applicable law, if any, provides otherwise), excluding
its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an
entity chartered or registered to do business in the
united states of america, any litigation relating to this
License shall be subject to the jurisdiction of the
federal courts of the northern district of california,
with venue lying in santa clara county, california, with
the losing party responsible for costs, including without limitation, court costs and reasonable attorneys'
fees and expenses. The application of the united
nations convention on contracts for the International
sale of goods is expressly excluded. Any law or regulation which provides that the language of a contract
shall be construed against the drafter shall not apply
to this license.
12. RESPONSIBILITY FOR CLAIMS.
As between initial developer and the contributors,
each party is responsible for claims and damages
arising, directly or indirectly, out of its utilization of
rights under this license and you agree to work with
initial developer and contributors to distribute such
responsibility on an equitable basis. Nothing herein is
intended or shall be deemed to constitute any
admission of liability.
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the “license”); you may not use this file
except in compliance with the License. You may obtain a
copy of the license at http://www.mozilla.org/MPL/
Software distributed under the license is distributed on an
"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either
express or implied. See the license for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________
The Initial Developer of the Original Code
is___________________.
Portions created by ______________________ are Copyright
(C) _______________________. All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under
the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] license are applicable
instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] license
and not to allow others to use your version of this file under
the MPL, indicate your decision by deleting the provisions
above and replace them with the notice and other provisions required by the [___] license. If you do not delete the
provisions above, a recipient may use your version of this file
under either the MPL or the [___] license."
NOTE: The text of this exhibit A may differ slightly from the
text of the notices in the source code files of the original
code. You should use the text of this exhibit A rather than
the text found in the original code/source code for Your
modifications.
APPENDIX
13. MULTIPLE-LICENSED CODE.
Initial developer may designate portions of the covered code as "Multiple-Licensed". "MultipleLicensed" means that the initial developer permits
you to utilize portions of the covered code under your
choice of the NPL or the alternative licenses, if any,
specified by the initial developer in the file described
in exhibit A.
EXHIBIT A -Mozilla Public License.
171
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matĂŠriel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the “CE” Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
• EN 55022
; Radio Frequency Interference
• EN 55024
; Electromagnetic Immunity
• EN 61000-3-2
; Power Line Harmonics
• EN 61000-3-3
; Voltage Fluctuations
• EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numĂŠrique de la classe B
01
Regulatory Information cont.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Development’s website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCO’99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCO’99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCO’99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCO’99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCO’99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
•
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
• The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCO’99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCO’03 (TCO’03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCO’03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
• Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
• Energy-saving mode after a certain time – beneficial
both for the user and the environment
• Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
• Electromagnetic fields
03
Regulatory Information cont.
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einfließen lassen. Zusätzliche
Informationen über unsere ‘grüne’ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our ‘green’ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection del’environnement
LGE. a publié sa 'Déclaration en faveur d’un
environnement plus propre' en 1994 et celle-ci est restĂŠe,
depuis lors, un principe directeur de notre entreprise.
Cette dĂŠclaration a servi de base Ă  notre rĂŠflexion et nous
a permis de prendre en compte Ă  la fois les aspects
ĂŠconomiques et sociaux de nos activitĂŠs, tout en
respectant l’environnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkĂźndete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung fßr eine sauberere
Umwelt). Seitdem dient dieses Ideal als fĂźhrendes Prinzip
des Unternehmens. Diese Erklärung war die Basis fßr die
DurchfĂźhrung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Überlegungen mit einbezogen wurden.
Wir fÜrdern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezĂźglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activitĂŠs en faveur de la
préservation de l’environnement et c’est dans cet esprit
que nous dĂŠveloppons nos produits : nous rĂŠduisons au
minimum les matières dangereuses qui entrent dans leur
composition et l’on ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui prĂŠsentent
un risque pour l’environnement. Il est donc important que
celui-ci soit recyclÊ après usage.
LGE. traite les moniteurs en fin de cycle conformĂŠment Ă 
une mĂŠthode de recyclage respectueuse de
l’environnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites rĂŠpartis dans le monde
entier. De nombreux composants sont rĂŠutilisĂŠs et
recyclÊs, et les matières dangereuses, ainsi que les
mĂŠtaux lourds, sont traitĂŠs selon un procĂŠdĂŠ ĂŠcologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un l’un de nos représentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
kĂśnnen. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er außer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
RĂźcknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr Ăźber unser Recyclingprogramm erfahren
mÜchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rôle de notre entreprise dans l’amélioration de
l’environnement. Pour plus de renseignements sur notre
politique “verte”, rendez visite à notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
econĂłmicos y medioambientales.
Informazioni per la tutela dell’ambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente piĂš pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attivitĂ  a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attivitĂ  a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dell’ambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservaciĂłn
del medio ambiente y desarrollamos nuestros productos
especĂ­ficamente para que se ajusten a la filosofĂ­a que
protege el entorno.
Reducimos al mĂĄximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
InformaciĂłn para el reciclaje
Este monitor puede contener piezas que entraĂąen riesgos
medioambientales. Es importante reciclar este monitor
despuĂŠs de su utilizaciĂłn.
LGE. trata todos los monitores usados siguiendo un
mĂŠtodo de reciclaje que no daĂąa al entorno. Contamos
con diversos sistemas de recuperaciĂłn y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias daĂąinas y los metales pesados se tratan
siguiendo un mĂŠtodo que no perjudique al medio
ambiente. Si desea obtener mĂĄs informaciĂłn acerca del
programa de reciclaje, pĂłngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. È
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dell’ambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visiĂłn y nuestras polĂ­ticas en un mundo
mĂĄs limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evoluciĂłn como empresa.
Visite nuestra pĂĄgina Web para obtener mĂĄs informaciĂłn
sobre nuestras polĂ­ticas ecolĂłgicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo piĂš pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica “verde”.
http://www.lge.com/about/environment/html/Recycling.jsp
PortuguĂŞs
Informaçþes relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde entĂŁo
como um princípio administrativo de orientação. A
Declaração Ê a base que nos tem permitido realizar
atividades favoråveis ao ambiente com consideração
atenta aos aspectos econĂ´micos, ambientais e sociais.
EspanĂľl
InformaciĂłn para la conservaciĂłn
medioambiental
LGE. presentĂł la 'DeclaraciĂłn para un entorno mĂĄs limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La DeclaraciĂłn
es la base que nos ha permitido llevar a cabo tareas que
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
Regulatory Information cont.
especificamente o conceito de favorĂĄvel ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, nĂŁo hĂĄ cĂĄdmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informaçþes relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. É importante que ele seja reciclado
apĂłs o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados atravĂŠs
de um mĂŠtodo de reciclagem agradĂĄvel ao ambiente. HĂĄ
vårios sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarĂŁo por tratamento atravĂŠs de um mĂŠtodo
favorĂĄvel ao ambiente.
Para obter mais informaçþes sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visĂŁo e nossas polĂ­ticas relacionadas a
um mundo mais limpo selecionando a questĂŁo do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informaçþes
sobre nossas polĂ­ticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚
Nederlands
¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡
'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',
ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ
ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË
Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘ËÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ
‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë
ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂ
ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ
‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò
ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË.
Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı
‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı
ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚
›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,
ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.
06
Regulatory Information cont.
ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂ
ËÒÔÓθÁÓ‚‡Ìˡ.
KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚Â
ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó
ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ
‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡
ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚
·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ
‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚
·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË
ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ
ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í
ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ
ÍÓÔÓ‡ˆËË LG.
Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ
·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ
ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛
Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚
ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:
http://www.lge.com/about/environment/html/Recycling.jsp
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
07
Regulatory Information cont.
WEEE
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autoritĂ  locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni piĂš dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
English
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en Üverkryssad
soptunna pü hjul sitter pü en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bĂśr
kasseras via andra vägar än de som finns fÜr
hushüllsavfall, helst via fÜr ändamület avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat pü rätt sätt
sĂĽ bidrar du till att fĂśrhindra negativa
konsekvenser fÜr miljÜn och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan fĂĽr av kommunen,
renhüllningsverket eller den butik där du kÜpte
produkten.
French
Élimination de votre ancien appareil
1.Ce symbole, reprĂŠsentant une poubelle sur
roulettes barrĂŠe d'une croix, signifie que le
produit est couvert par la directive europĂŠenne
2002/96/EC.
2.Les ĂŠlĂŠments ĂŠlectriques et ĂŠlectroniques
doivent ĂŞtre jetĂŠs sĂŠparĂŠment, dans les videordures prĂŠvus Ă  cet effet par votre municipalitĂŠ.
3.Une ĂŠlimination conforme aux instructions aidera
Ă  rĂŠduire les consĂŠquences nĂŠgatives et risques
ĂŠventuels pour l'environnement et la santĂŠ
humaine.
4.Pour plus d'information concernant l'ĂŠlimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures mÊnagères ou
encore la magasin oĂš vous avez achetĂŠ ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
08
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger pü miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fĂĽs ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkÜ- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristÜÜn ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Greek
∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜
1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜
‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ
ηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.
2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ
ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο
ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓ
ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜
¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ
ÙÔÈΤ˜ ·Ú¯¤˜.
3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·
‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ
ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.
4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ
·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂ
ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ
·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·ÙÂ ÙÔ
ÚÔ˚fiÓ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte mßssen
getrennt vom HausmĂźll Ăźber dafĂźr staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäßen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persÜnlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
CĂłmo deshacerse de aparatos elĂŠctricos y
electrĂłnicos viejos
1.Si en un producto aparece el sĂ­mbolo de un contenedor
de basura tachado, significa que ĂŠste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos elĂŠctricos o electrĂłnicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a travĂŠs de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pĂşblica.
4.Para obtener mĂĄs informaciĂłn sobre cĂłmo deshacerse de
sus aparatos elĂŠctricos y electrĂłnicos viejos, pĂłngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquiriĂł el producto.
Danish
SĂĽdan smider du dit gamle apparat ud
1.NĂĽr der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjĂŚlp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Regulatory Information cont.
Portuguese
Hungarian
Slovak
Polish
Czech
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2010:03:11 18:25:59+09:00
Modify Date                     : 2010:03:11 18:49:52+09:00
Metadata Date                   : 2010:03:11 18:49:52+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:BDD62C15F02CDF118408D300EC823662
Instance ID                     : uuid:e0b8c078-2545-45e4-a111-7c6759110209
Derived From Instance ID        : uuid:216a1589-48c5-462a-a9af-be8d68c12673
Derived From Document ID        : uuid:ead5d5c8-eca9-43ab-bd16-a2e8d8e662be
Format                          : application/pdf
Title                           : Microsoft Word - G_User_s manual.doc
Creator                         : 
Has XFA                         : No
Page Count                      : 82
Author                          : 

EXIF Metadata provided by EXIF.tools