LG Electronics USA 37LG700HUA LCD TV/MONITOR User Manual SAC30708043 Edit1

LG Electronics USA LCD TV/MONITOR SAC30708043 Edit1

Contents

User manual 1 of 2

Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.LCD TVOWNER’S MANUAL32LG700H37LG700H42LG700HInstaller Reference for Commercial ModeMPI/PPV Card Setup see page 19Commercial Mode Setup see pages 87-104P/NO : SAC30708043 (0810-REV00)www.lgcommercial.comThis product qualifies for ENERGY STAR in the “factory default(Home mode)” setting and this is the setting in which powersavings will be achieved.Changing the factory default picture setting or enabling otherfeatures will increase power consumption that could exceed thelimits necessary to quality for Energy Star rating.
1WARNING / CAUTIONWARNING / CAUTIONTo prevent fire or shock hazards, do not exposethis product to rain or moisture.FCC NOTICEClass B digital deviceThis equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference toradio or television reception, which can be determinedby turning the equipment off and on, the user isencouraged to try to correct the interference by oneor more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment andreceiver.- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TVtechnician for help.Any changes or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate the equipment.CAUTIONDo not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product The lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presenceof uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.The exclamation point within an equilateraltriangle is intended to alert the user tothe presence of important operating andmaintenance (servicing) instructions in the litera-ture accompanying the appliance.TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK). NOUSER SERVICEABLE PARTS INSIDE. REFER TOQUALIFIED SERVICE PERSONNEL.WARNING/CAUTIONTO REDUCE THE RISK OF FIRE AND ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding systemof the building, as close to the point of the cable entryas practical.
Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.Only use attachments/accessories specified bythe manufacturer.Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over.Unplug this apparatus during lighting storms orwhen unused for long periods of time.Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus hasbeen exposed to rain or moisture, does not operatenormally, or has been dropped.2IMPORTANT SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS12345786910
3Never touch this apparatus or antenna during athunder or lighting storm. When mounting a TV on the wall, make sure not toinstall the TV by the hanging power and signalcables on the back of the TV.Do not allow an impact shock or any objects to fallinto the product, and do not drop onto the screenwith something.CAUTION concerning the Power Cord :It is recommend that appliances be placed upon adedicated circuit; that is, a single outlet circuit whichpowers only that appliance and has no additionaloutlets or branch circuits. Check the specificationpage of this owner's manual to be certain.Do not connect too many appliances to the sameAC power outlet as this could result in fire or elec-tric shock.Do not overload wall outlets. Overloaded wall out-lets, loose or damaged wall outlets, extension cords,frayed power cords, or damaged or cracked wireinsulation are dangerous. Any of these conditionscould result in electric shock or fire. Periodicallyexamine the cord of your appliance, and if itsappearance indicates damage or deterioration,unplug it, discontinue use of the appliance, andhave the cord replaced with an exact replacementpart by an authorized servicer. Protect the powercord from physical or mechanical abuse, such asbeing twisted, kinked, pinched, closed in a door, orwalked upon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance. Do not make the TV with the power cord pluggedin. Do not use a damaged or loose power cord. Besure do grasp the plug when unplugging the powercord. Do not pull on the power cord to unplug theTV. WARNING - To reduce the risk of fire or electricalshock, do not expose this product to rain, moistureor other liquids. Do not touch the TV with wethands. Do not install this product near flammableobjects such as gasoline or candles or expose theTV to direct air conditioning. Do not expose to dripping or splashing and do notplace objects filled with liquids, such as vases, cups,etc. on or over the apparatus (e.g. on shelves abovethe unit).GGRROOUUNNDDIINNGGEnsure that you connect the earth ground wire toprevent possible electric shock. (i.e. a TV with athree-prong grounded AC plug must be connectedto a three-prong grouned AC outlet) If groundingmethods are not possible, have a qualified electri-cian install a separate circuit breaker. Do not try to ground the unit by connecting it totelephone wires, lightening rods, or gas pipes.DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSSMains plug is the disconnecting device. The plugmust remain readily operable.Keep the product away from direct sunlight.1211141316171819Power SupplyShort-circuitBreaker15
4AANNTTEENNNNAASSOOuuttddoooorr aanntteennnnaa ggrroouunnddiinnggIf an outdoor antenna is installed, follow the precau-tions below. An outdoor antenna system should notbe located in the vicinity of overhead power lines orother electric light or power circuits, or where it cancome in contact with such power lines or circuits asdeath or serious injury can occur.Be sure the antenna system is grounded so as to pro-vide some protection against voltage surges andbuilt-up static charges. Section 810 of the National Electrical Code (NEC) inthe U.S.A. provides information with respect to prop-er grounding of the mast and supporting structure,grounding of the lead-in wire to an antenna dis-charge unit, size of grounding conductors, location ofantenna discharge unit, connection to groundingelectrodes and requirements for the grounding elec-trode. AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthheeNNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700CleaningWhen cleaning, unplug the power cord and scrubgently with a soft cloth to prevent scratching. Do notspray water or other liquids directly on the TV aselectric shock may occur. Do not clean with chemi-cals such as alcohol, thinners or benzene.MovingMake sure the product is turned off, unpluggedand all cables have been removed. It may take 2 ormore people to carry larger TVs. Do not pressagainst or put stress on the front panel of the TV. VentilationInstall your TV where there is proper ventilation. Donot install in a confined space such as a bookcase.Do not cover the product with cloth or other mate-rials (e.g.) plastic while plugged in. Do not install inexcessively dusty places. If you smell smoke or other odors coming from theTV or hear strange sounds, unplug the power cordcontact an authorized service center.Do not press strongly upon the panel with a hand orsharp object such as nail, pencil or pen, or make ascratch on it.2220Antenna Lead in WireAntenna Discharge Unit(NEC Section 810-20)Grounding Conductors(NEC Section 810-21)Ground ClampsPower Service GroundingElectrode System (NECArt 250, Part H)Ground ClampElectric ServiceEquipmentNEC: National Electrical Code23242125
5CONTENTSWARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7PREPARATIONAccessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Securing the TV to the wall to prevent falling When the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . 17Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 18MPI Card Slot / PPV Card Installation . . . . . . . . . . . . . . . 19EXTERNAL EQUIPMENT SETUPHD Receiver Setup- Component Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 20- HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21- DVI to HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 22 DVD Setup- Component Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23- HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VCR Setup - Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25- Composite (RCA) Connection . . . . . . . . . . . . . . . . . . . 25Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26PC Setup- VGA (D-Sub 15 pin) Connection . . . . . . . . . . . . . . . 27- DVI to HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 28- Screen Setup for PC mode . . . . . . . . . . . . . . . . . . . . . . . . 29Audio Out Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33WATCHING TV / CHANNEL CONTROLRemote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Channel Setup - Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 39- Add / Delete Channel (Manual Tuning) . . . . . . 40- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43PICTURE CONTROLPicture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 44Preset Picture Settings- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Manual Picture Adjustment- Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 49Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 50Advanced Control - Black (Darkness) Level . . . . . . . 51Eye Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Advanced Control - Film Mode . . . . . . . . . . . . . . . . . . . . . . . . .53Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54SOUND & LANGUAGE CONTROLAuto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 55Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . 56Sound Setting Adjustment - User Mode . . . . . . . . . . . 57- SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Clear Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64On-Screen Menus Language Selection . . . . . . . . . . . . . 65Caption Mode- Analog Broadcasting System Captions . . . . . . . 66- Digital Broadcasting System Captions . . . . . . . . 67- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68TIME SETTINGClock Setting- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6PARENTAL CONTROL / RATINGSSet Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Example Electronic Program Guide . . . . . . . . . . . . . . . . . . . 83Interactive TV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84PIP (Picture-In-Picture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85COMMERCIAL MODE SETUPInstaller Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Interactive TV Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Commercial Mode Setup for Master TV . . . . . . . . . . . . 89TLL-1100A Cloning Connections/Learning Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90LT2002 Cloning Connections/Learning Setup . . 91LT2002 Cloning Learning Setup . . . . . . . . . . . . . . . . . . . . . . 92Cloning Connections/Teaching Setup . . . . . . . . . . . . . . 93Installer Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Reference: Detailed Instructions For Making AMaster TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 0Reference: Procedures for adding Channel LabelIcons/Custom Channel Labels (2-5-4 + MENUMode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Reference: Clonable Menu Features . . . . . . . . . . . . . . . . 102Reference: Power Saving Setup . . . . . . . . . . . . . . . . . . . . . . . 103TV Aux Input Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 103TV Camport Auto Sense Operation . . . . . . . . . . . . . . . . 10 4APPENDIXTroubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105Reference: LT2002 Cloning ProcedureTroubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Troubleshooting Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Commercial Mode Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Programming the Remote Control . . . . . . . . . . . . . . . . . . . 112IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
7FEATURES OF THIS TVis a trademark of SRS Labs, Inc.TruSurround XT technology is incorporated underlicense from SRS Labs, Inc.Manufactured under license from Dolby Laboratories.“Dolby“and the double-D symbol are trademarks ofDolby Laboratories. USB INSERVUCE ONLYSERVUCE ONLYUSB port shall be used for software update by servicepersonnel only.FOR LCD TV■If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrongwith TV.■Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverseeffect on the monitor's performance.■Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce sometemporary distortion effects on the screen.On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with generalhousehold waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.HDMITM, the HDMI logo and High-DefinitionMultimedia Interface are trademarks or registeredtrademarks of HDMI Licensing."
8PREPERATIONACCESSORIESEnsure that the following accessories are included with your TV. If an accessory is missing, please contact thedealer where you purchased the TV. The accessories included may differ from the images below.Copyright© 2007 LGE,All Rights Reserved.Owner’s Manual Power CordCD Manual Protective Bracket andBolt for Power Cord (Refer to P.13)Cable Holder(Refer to P.13)* Wipe spots on the exterior only with the pol-ishing cloth.* Do not wipe roughly when removing stains.Excessive pressure may cause scratches ordiscoloration.Polishing Cloth(This feature is not avail-able for all models.)OOppttiioonn EExxttrraassD-sub 15 pin CableWhen using the VGA (D-sub 15 pincable) PC connection, the usermust use shielded signal interfacecables with ferrite cores to maintainstandards compliance.x 2Torx plus Star head screw(Refer to P.12)M4xL22(Machine Screw)Screw for stand fixing(Refer to P.15)Ø4xL20(Plastic Screw)Bolts for stand assembly(Refer to P.12)x 4 x 4M4xL26(Machine Screw)Ø4xL20(Plastic Screw)
PREPARATION9FRONT PANEL INFORMATION■Image shown may differ from your TV.■NOTE: If your TV has a protection tape attached, remove the tape.And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).POWER ButtonPower/Standby IndicatorIlluminates red in standby mode.Illuminates blue when the set is switched on.CHVOLMENUINPUTENTERVOLUME (+, -) ButtonsENTER ButtonMENU ButtonINPUT ButtonRemote Control SensorCHANNEL(+, -) ButtonsStand
PREPARATION10PREPARATION■Image shown may differ from your TV.BACK PANEL INFORMATION R AV IN 2L/MONORAUDIOVIDEOUSBSERVICE ONLY REMOTECONTROL OUTOPTICALDIGITALAUDIO OUTAV IN 1AUDIOVIDEOMONO /UPDATERESETLAN(SERVICE ONLY)RGB INRGB(PC) AUDIO(RGB/DVI)COMPONENT INVIDEOAUDIOHDMI/DVI IN 21(DVI)RJPINTERFACESPEAKER OUT8RS-232C IN(SERVICE ONLY)R 824R( )ANTENNA INANTENNA INM.P.I.M.P.I.71356910 111213151411
PREPARATION11REMOTE CONTROL OUTIR output for controlling an auxiliary device.RJP INTERFACE (REMOTE JACK PACK PORT)Connect to remote jack pack control output port.COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & a redand white cable for audio.AV (Audio/Video) IN Analog composite connection. Supports standarddefinition video only (480i). Used for PC/DTV audio input jack.USB SERVICE ONLYUsed for software updates.ANTENNA INConnect over-the air signals to this jack.M.P. I.Power Cord SocketFor operation with AC power. Caution: Never attempt to operate the TV on DCpower.HDMI/DVI INDigital Connection. Supports HD video and Digitalaudio. Accepts DVI video using an adapter or HDMI toDVI cable (not included)LAN (SERVICE ONLY)Connect to control network.UPDATESoftware downloads and debug mode enable/dis-able.RESETHardware reset to PTC microcontroller.OPTICAL DIGITAL AUDIO OUT Digital audio output for use with amps and hometheater systems. Includes an optical connection.Note: In standby mode, these ports do not work.SPEAKER OUT 8ΩConnect to external speaker input.RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable(VGA cable).AUDIO (RGB/DVI) 1/8” headphone jack for analog PC audio input.RS-232C IN (SERVICE ONLY) Used for software updates.123459867101112131415
PREPARATION12STAND INSTRUCTIONPREPARATIONCarefully place the TV screen side down on acushioned surface to protect the screen fromdamage.Assemble the parts of the SSTTAANNDD BBOODDYYwith CCOOVVEERR BBAASSEEof the TV. 12Insert the stand as shown.3SSTTAANNDD BBOODDYYCCOOVVEERR BBAASSEE■Image shown may differ from your TV.GGMake sure the screws in the stand are fullytightened. (If not tightened fully, the productcould tilt forward and fall). But do not overtighten, over-tightening can damage the threadson the screws.NOTE!DETACHMENTCarefully place the TV screen side down on acushioned surface to protect the screen fromdamage.1Remove the four screws that hold the base on.2Detach the stand from TV.3INSTALLATION4orx 4Tighten the stand with thefour screws (provided as partsof the TV).Tighten the two of these four screwsand the two Torx plus star head screws(provided as parts of the TV) to secure the TV. Tightenthe two Torx plus star head screws with a star head dri-ver bit (not provided as parts of the TV).x 2 x 2
PREPARATION13CABLE MANAGEMENT■Image shown may differ from your TV.Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with thePROTECTIVE BRACKET and the screw asshown. It will help prevent the power cablefrom being removed by accident.Install the CABLE MANAGEMENT CLIP asshown.If your TV has the CABLE HOLDER, install itas shown and bundle the cables.12Put the cables inside the CABLE MANAGEMENTCLIP and snap it closed.3PROTECTIVE BRACKET(This feature is not availablefor all models.) GGDo not hold the CABLE MANAGEMENT CLIPwhen moving the TV.- If the TV is dropped, you may be injured or theproduct may be broken.NOTE!CABLE MANAGEMENT CLIPCABLE HOLDER
PREPARATION14PREPARATIONDESKTOP PEDESTAL INSTALLATIONFor proper ventilation, allow a clearance of 4 inches on all four sides.■Image shown may differ from your TV.* This feature is not available for all models.4 inches4 inches4 inches4 inchesSWIVEL STAND The TV can be conveniently swivelled on its stand 90° to the left or right to provide the optimum viewing angle.GGEnsure adequate ventilation by following the clearance recommendations.GGDo not mount near or above any type of heat source.CAUTION
PREPARATION15ATTACHING THE TV TO A DESKThe TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causinginjury or damaging the product. Use only the included screw.GGTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installationinstructions. Tipping, shaking, or rocking the TV may cause injury.WARNING1-Screw(provided as parts of the product)DeskStand
PREPARATION16PREPARATIONVESA WALL MOUNTINGInstall your wall mount on a solid wall perpendicular to the floor. When attaching to other building materi-als, please contact your nearest dealer.If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.We recommend that you use an LG brand wall mount when mounting the TV to a wall.GGDo not install your wall mount kit while the TV is plugged in. It may result in personal injury due to electricshock.CAUTIONGGScrew length needed depends on the wall mountused. For further information, refer to the instruc-tions included with the mount.GGStandard dimensions for wall mount kits are shownin the table.GGWhen purchasing our wall mount kit, a detailedinstallation manual and all parts necessary forassembly are provided.GGDo not use screws longer then the standard dimen-sion, as they may cause damage to the inside tothe TV.GGFor wall mounts that do not comply with the VESAstandard screw specifications, the length of thescrews may differ depending on their specifica-tions.GGDo not use screws that do not comply with theVESA standard screw specifications.Do not tighten the screws too much. It may dam-age the TV or allow the TV to a fall and cause per-sonal injury. LG is not liable for these kinds of acci-dents.GGLG is not liable for TV damage or personal injurywhen a non-VESA or non specified wall mount isused or the consumer fails to follow the TV installa-tion instructions.NOTE!Product Model VESA(A *B) Standard Screw Quantity32LG700H37LG700H42LG700H200 * 100 M6 4LCD TVAABBGGTo prevent injury, this apparatus must be securely attached to the wall in accordance with the installa-tion instructions.WARNING200 * 200200 * 200M6M6 44
PREPARATION17SECURING THE TV TO THE WALL TO PREVENT FALLINGWHEN THE TV IS USED ON A STANDWe recommend that you set the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■Insert eye-bolts (or TV brackets and bolts) to attach the product to the wall as shown in the picture. *If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.Secure the wall brackets with screws (sold separately) to the wall. Match the height of the bracket thatis mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.■Use a sturdy rope or cord (sold separately) to tie the product. It issafer to tie the rope so it becomes horizontal between the wall andthe product (the less slack in the rope, the better).■You should purchase necessary components to prevent TV from falling off of the stand.■Image shown may differ from your TV.* This feature is not available for all models.GGUse a platform or cabinet strong enough and large enough to support the size and weight of the TV.GGTo use the TV safely, make sure that the height of the bracket on the wall and the one on the TV arethe same.NOTE!
ANTENNA INANTENNA INPREPARATION18PREPARATIONANTENNA OR CABLE CONNECTION1. Antenna (Analog or Digital)Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnection.For optimum picture quality, adjust the direction if needed.2. CableWallAntennaSocketOutdoorAntenna(VHF, UHF)Cable TVWall JackMulti-family Dwellings/Apartments(Connect to wall antenna socket)RF Coaxial Wire (75 ohm)RF Coaxial Wire (75 ohm)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Be careful not to bend the copper wirewhen connecting the antenna.Copper Wire■To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. ■If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.■If the antenna is not installed properly, contact your dealer for assistance.R( )■To prevent damage do not connect to the power outlet until all connections are made between the devices.
PREPARATION19MPI CARD SLOT / PPV CARD INSTALLATION1. Remove the two MPI card retainer screws.2. Pull out current MPI card far enough so that the RF cable can be detached from the old card.2. Detach RF cable.3. Place new PPV card into slot and slide it in far enough to reconnect RF cable.4. Insert card all the way into the slot making sure it is fully seated into back plane connector.5. Replace the two card retainer screws.The MPI card is equipped with an RF jack for antenna/cable signal source connection. The MPI card slot is also available for installing a PPV (Pay-Per-View) card.MPI Card Removal / PPV Card InstallationRF CABLERF cable needs to bedisconnected to removecurrent card.ANTENNA IN M.PM.P.I.M.P. I.Card Slot
PREPARATION20HD RECEIVER SETUPEXTERNAL EQUIPMENT SETUPThis TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However,if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure asshown below.Component Connection1. How to connectConnect the video outputs (Y, PB, PR)of the digital set-top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOOjacks onthe TV. Match the jack colors (Y = green, PB= blue, andPR= red).Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOOjacks on the TV.212. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select CCoommppoonneennttinput source using the IINNPPUUTT buttonon the remote control.■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.■This part of EXTERNAL EQUIPMENT SETUP mainly uses the picture for 42LG700H model. UPDARESETLAN(SERVICE ONLY)RGB INRGB(PC) AUDIO(RGB/DVI)COMPONENT INVIDEOAUDIOR(SY L RPBPR12Y, CB/PB, CR/PRSupported ResolutionsHorizontal Vertical Frequency(KHz)Frequency(Hz)15.73 59.9415.73 60.0031.47 59.9431.47 60.0044.96 59.9445.00 60.0033.72 59.9433.75 60.00Resolution 720x480i720x480p1280x720p1920x1080iSignal480i480p720p1080 i1080 pComponentYesYesYesYesNoHDMINoYesYesYesNo
EXTERNAL EQUIPMENT SETUP21HDMI ConnectionConnect the digital set-top box to HHDDMMII//DDVVII IINNjack on the TV.No separate audio connection is necessary.HDMI supports both audio and video.1. How to connect2. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select HHDDMMIIinput source with using the IINNPPUUTTbuttonon the remote control.21HDMI-DTVRESETUPDATE (RGB INCOVIDHDMI/DVI IN 21(DVI)RJPINTERFACEHDMI-DTV OUTPUT1Horizontal Vertical Frequency(KHz)Frequency(Hz)31.47 59.9431.47 60.0044.96 59.9445.00 60.0033.72 59.9433.75 60.00Resolution 720x480p1280x720p1920x1080i
EXTERNAL EQUIPMENT SETUP22EXTERNAL EQUIPMENT SETUPDVI to HDMI Connection RESETLAN(SERVICE ONLY)RGB INRGB(PC)COMPONENT INVIDEORJPINTERFACEAUDIOAUDIO(RGB/DVI)HDMI/DVI IN 21(DVI)LRDVI-DTV OUTPUT LR12GGA DVI to HDMI cable or adapter is required for thisconnection. DVI doesn't support audio, so a separateaudio connection is necessary.NOTE!Connect the DVI output of the digital set-top box tothe HHDDMMII//DDVVII IINNjack on the TV.Connect the audio output of the digital set-top box tothe AAUUDDIIOO((RRGGBB//DDVVII))jack on the TV.1. How to connect2. How to use■Turn on the digital set-top box. (Refer to the owner’s man-ual for the digital set-top box.)■Select the HHDDMMIIinput source on the TV using the IINNPPUUTTbutton on the remote control.21
EXTERNAL EQUIPMENT SETUP23DVD SETUPComponent ConnectionComponent Input portsTo get better picture quality, connect a DVD player to the component input ports as shown below.Component ports on the TVYPBPRVideo output ports on DVD playerYYYYPBB-YCbPbPRR-YCrPrConnect the video outputs (Y, PB, PR)of the DVD to theCCOOMMPPOONNEENNTT IINN VVIIDDEEOOjacks on the TV.Match the jack colors (Y = green, PB= blue, and PR= red).Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOOjacks on the TV.1. How to connect2. How to use■Turn on the DVD player, insert a DVD.■Select the CCoommppoonneennttinput source on the TV using theIINNPPUUTTbutton on the remote control.■Refer to the DVD player's manual for operating instructions.21 UPDATRESETLAN(SERVICE ONLY)RGB INRGB(PC) AUDIO(RGB/DVI)COMPONENT INVIDEOAUDIOR(SEY L RPBPR1 2
EXTERNAL EQUIPMENT SETUP24EXTERNAL EQUIPMENT SETUPHDMI ConnectionConnect the HDMI output of the DVD to theHHDDMMII//DDVVII IINNjack on the TV.No separate audio connection is necessary.HDMI supports both audio and video.1. How to connect2. How to use■Select the HHDDMMII input source on the TV using theIINNPPUUTTbutton on the remote control.■Refer to the DVD player's manual for operating instructions.21 (SRGB INCOMVIDEOHDMI/DVI IN 21(DVI)RJPINTERFACEHDMI OUTPUT 1
EXTERNAL EQUIPMENT SETUP25VCR SETUPAntenna Connection■To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on thescreen. This phenomenon is common to all TVs and is not covered by warranty.L RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTANTENNA IN M.P.I.( )( )Wall JackAntenna12Connect the RF antenna out socket of theVCR to the AANNTTEENNNNAA IINNsocket on theTV.Connect the antenna cable to the RFantenna in socket of the VCR.1. How to connect2. How to use■Set VCR output switch to 3 or 4 and thentune TV to the same channel number.■Insert a video tape into the VCR and pressPLAY on the VCR. (Refer to the VCR owner’smanual.)21Composite (RCA) ConnectionConnect the AAUUDDIIOO/VVIIDDEEOOjacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)■Select the AAVV11input source on the TV using the IINNPPUUTTbutton on the remote control.■If connected to AAVV IINN22, select AAVV22input source on the TV(Except 22LG3DCH).1GGIf you have a mono VCR, connect the audio cablefrom the VCR to the AAUUDDIIOO LL((MMOONNOO))jack ofthe TV.NOTE!AUDIOVIDEOMONO /LRS-VIDEOVIDEOOUTPUTSWITCHANT INANT OUTAV IN 11
EXTERNAL EQUIPMENT SETUP26EXTERNAL EQUIPMENT SETUPOTHER A/V SOURCE SETUPAV IN 2L/MONORAUDIOVIDEOUSBSERVICE ONLYL RVIDEOCamcorderVideo Game SetConnect the AAUUDDIIOO/VVIIDDEEOOjacksbetween TV and external equipment.Match the jack colors.(Video = yellow, Audio Left = white, andAudio Right = red)1. How to connect2. How to use■Select the AAVV22input source on the TV using theIINNPPUUTTbutton on the remote control. ■If connected to AAVV IINN11input, select the AAVV11input source on the TV. ■Operate the corresponding external equipment.11
EXTERNAL EQUIPMENT SETUP27PC SETUP GGTo get the the best picture quality, adjust the PCgraphics card to 1360x768.GGDepending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.GGIn PC mode, there may be noise associated with theresolution, vertical pattern, contrast or brightness.If noise is present, change the PC output to anoth-er resolution, change the refresh rate to anotherrate or adjust the brightness and contrast on thePICTURE menu until the picture is clear.GGAvoid keeping a fixed image on the screen for along period of time. The fixed image could becomepermanently imprinted on the screen.GGThe synchronization input form for Horizontal andVertical frequencies is separate.GGDepending on the graphics card, some resolutionsettings may not allow the image to be positionedon the screen properly.NOTES!Supported Display Specifications(RGB-PC, HDMI-PC) This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) ConnectionAV IN 1 COMPONENT INVIDEORS-23(SERVICAUDIORGB INRGB OUTPUT AUDIORGB(PC) AUDIO(RGB/DVI)122. How to use■Turn on the PC and the TV.■Select the RRGGBBinput source on the TV using the IINNPPUUTTbutton on the remote control.Connect the VGA output of the PC to the RRGGBB((PPCC))jack on the TV.Connect the PC audio output to the AAUUDDIIOO((RRGGBB//DDVVII))jack on the TV.1. How to connect21Resolution 720x4001360x768640x350640x480800x6001024x7681366x7681280x768* Only RGB-PC mode 1280x1024Horizontal Vertical Frequency(KHz)Frequency(Hz)31.468 70.0931.469 70.0831.469 59.9437.861 72.8037.500 75.0035.156 56.2537.879 60.3148.077 72.1846.875 75.0048.363 60.0056.476 70.0660.023 75.0247.776 59.87060.289 74.89347.712 60.01547.130 59.65863.981 60.02079.976 75.025
EXTERNAL EQUIPMENT SETUP28EXTERNAL EQUIPMENT SETUPDVI to HDMI Connection URESETLAN(SERVICE ONLY)COMPONENT INVIDEORJPINTERFACEAUDIOHDMI/DVI IN 21(DVI)DVI-PC OUTPUT AUDIORGB(PC)AUDIO(RGB/DVI)RGB IN122. How to use■Turn on the PC and the TV.■Select the HHDDMMIIinput source on the TV using the IINNPPUUTTbutton on the remote control.Connect the DVI output of the PC to the HHDDMMII//DDVVIIIINN jack on the TV.Connect the PC audio output to the AAUUDDIIOO((RRGGBB//DDVVII))jack on the TV.1. How to connect21
EXTERNAL EQUIPMENT SETUP29Screen Setup for PC mode1024 x 7681280 x 7681360 x 7681366 x 768Auto config.ResolutionGPositionSizePhaseResetScreenMovePrev.MENUSelecting ResolutionYou can choose the resolution in RGB-PC mode. The PPoossiittiioonn, PPhhaassee, and SSiizzeecan also be adjusted.EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)Select PPIICCTTUURREE.Select RReessoolluuttiioonn.1MENU3ENTER 4Select SSccrreeeenn ((RRGGBB--PPCC)).2ENTER 5Select the desired resolution.ENTER ENTER
EXTERNAL EQUIPMENT SETUP30EXTERNAL EQUIPMENT SETUPAuto ConfigureAutomatically adjusts picture position and minimizes image instability. After adjustment, if the image is stillnot correct, try using the manual settings or a different resolution or refresh rate on the PC.Auto config. GResolutionPositionSizePhaseResetScreenMovePrev.MENUTo Set• If the position of the image is still notcorrect, try Auto adjustment again.• If picture needs to be adjusted againafter Auto adjustment in RGB-PC, youcan adjust the PPoossiittiioonn, SSiizzee orPPhhaassee.Yes NoSelect PPIICCTTUURREE.Select AAuuttoo ccoonnffiigg...1MENU3ENTER 4Select SSccrreeeenn ((RRGGBB--PPCC)).2ENTER 5ENTER Start Auto Configuration.Select YYeess.ENTER EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)
EXTERNAL EQUIPMENT SETUP31Adjustment for screen Position, Size, and PhaseIf the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picturephase manually.This feature operates only in RGB-PC mode.Auto config.ResolutionPositionGSizePhaseResetGFDEScreenMovePrev.MENU■PPoossiittiioonn: This function is to adjust pic-ture to left/right and up/down as youprefer. ■SSiizzee: This function is to minimize anyvertical bars or stripes visible on thescreen background. And the horizontalscreen size will also change.■PPhhaassee: This function allows you toremove any horizontal noise and clear orsharpen the image of characters.Select PPIICCTTUURREE.Select PPoossiittiioonn, SSiizzee, or PPhhaassee.1MENU3ENTER 4Select SSccrreeeenn ((RRGGBB--PPCC)).2ENTER 5ENTER Make appropriate adjustments.ENTER EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)
EXTERNAL EQUIPMENT SETUP32EXTERNAL EQUIPMENT SETUPScreen Reset (Reset to original factory values)Returns PPoossiittiioonn, SSiizzee, and PPhhaasseeto the default factory settings.This feature operates only in RGB-PC mode.Auto config.PositionResolutionSizePhaseResetGScreenMovePrev.MENUInitialize Settings.Yes NoSelect PPIICCTTUURREE.Select RReesseett.1MENU3ENTER 4Select SSccrreeeenn ((RRGGBB--PPCC)).2ENTER 5ENTER Select YYeess.ENTER EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)
Connect one end of the optical or coaxial cable to theTV’s OOPPTTIICCAALL port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT.Connect the other end of the optical or coaxial cable tothe digital audio input on the audio equipment.Set the “TV Speaker option - Off” in the AUDIO menu. (GGpp..9933). See the external audio equipment instruction manu-al for operation.EXTERNAL EQUIPMENT SETUP33AUDIO OUT CONNECTIONSend the TV’s audio to external audio equipment via the Audio Output port.REMOTECONTROL OUTOPTICALDIGITALAUDIO OUTAV IN 1AUDIOVIDEOMONO /UPDATEOVI)SPEAKER OUT8RS-232C IN(SERVICE ONLY)OPTICALDIGITALAUDIO OUT12GGWhen connecting with external audio equipments, such asamplifiers or speakers, you can turn the TV speakers off inthe menu. (GG pp..6611)NOTE!GDo not look into the optical output port. Looking at thelaser beam may damage your vision.GGBlock the SPDIF out (optical/coaxial) about the contentswith ACP(Audio Copy Protection) function.CAUTION1. How to connect231Digital
WATCHING TV / CHANNEL CONTROL34REMOTE CONTROL FUNCTIONSWATCHING TV / CHANNEL CONTROLWhen using the remote control, aim it at the remote control sensor on the TV.MUTERETURNCCTVPOWERGUIDEPORTALENTER VOL CH1234567809FLASHBKVCRDVDINPUTMENUINFOiSTBPAGEPIP SAPPIP CH- PIP CH+PIP SWAPPIP INPUTALPHA/NUMREMOVERATIOTIMERPOWERTV/STB/DVD/VCRGUIDEPORTALINFOTurns your TV or any other programmed equipment onor off, depending on mode.Select the remote’s operating mode: TV, STB, DVD, orVCR. Displays and removes electronic channel guide.Displays and removes hotel interactive menu.Display information at the top of the screen.NUMBER button— (DASH)FLASH BACKVCR/DVD control buttonsPIPRATIOTIMERSAPPIP CH +/-PIP SWAPPIP INPUTNavigate the on-screen menus and adjust the system set-tings to your preference.Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.Tune to the last channel viewed.Control video cassette recorders or DVD players.Switches the sub picture Double Window or off mode. Change the aspect ratio. GGpp..4444Select the amount of time before your TV turns off auto-matically. GGpp..7722Analog mode: Selects MTS sound (Mono, Stereo, or aSAP) GGpp..6633DTV mode: Changes the audio language.Changes the PIP channel. Exchange the main/sub images.Select the connected input source for the sub-picture.
WATCHING TV / CHANNEL CONTROL35Installing Batteries■Open the battery compartment cover on the back side and installthe batteries matching correct polarity (+with +,-with -).■Install two 1.5V AAA batteries. Don’t mix old or used batteries withnew ones.■Close cover.THUMBSTICK(Up/Down/LeftRight/ENTER)RETURNMENUINPUTNavigate the on-screen menus and adjust the system settings to your preference.Clears all on-screen displays and returns to TV viewing from any menu.Displays the main menu.External input modes rotate in regular sequence: TV, AV1-2, Component, RGB-PC,HDMI1 and HDMI2.VOLUME UP/DOWNCCMUTECHANNELUP/DOWNPAGEUP/DOWNIncrease/decrease the sound level.Select a closed caption. GGpp..6666Switch the sound on or off. GGpp..3377Select available channels.Move from one full set of screen information to the next one.
WATCHING TV / CHANNEL CONTROL36WATCHING TV / CHANNEL CONTROLTURNING ON TVWATCHING TV / CHANNEL CONTROLNOTE!GGIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.First, connect power cord correctly. At this moment, the TV switches to standby mode.■In standby mode to turn TV on, press the button on the TV or pressthe PPOOWWEERRbutton on the remote control.Select the viewing source by using the IINNPPUUTTbutton on the remote control.■This TV is programmed to remember which power state it was last set to,even if the power cord is out.When finished using the TV, press the PPOOWWEERRbutton on the remote control.The TV reverts to standby mode.123
WATCHING TV / CHANNEL CONTROL37Press the CCHH((or ))or NNUUMMBBEERRbuttons to select a channel number.1VOLUME ADJUSTMENTCHANNEL SELECTIONPress the VVOOLL((++ or --))button to adjust the volume.If you want to switch the sound off, press the MMUUTTEEbutton. You can cancel the Mute function by pressing the MMUUTTEEor VVOOLL((++ or --))button.Adjust the volume to suit your personal preference.123
WATCHING TV / CHANNEL CONTROL38WATCHING TV / CHANNEL CONTROLON-SCREEN MENUS SELECTIONYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.Display each menu.Select a menu item.Enter to the pop up menu.1MENU32ENTER ENTER Return to TV viewing.4MENUEnterMoveCHANNELCHANNELTIMEPICTUREOPTIONAUDIOLOCKEnterMoveAspect Ratio : 16:9Picture Mode : Standard• Back Light 80• Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0PICTUREEEnterMoveAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAUDIOELREnterMoveClock :Feb/21/2008/ 2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffTIMEEnterMoveLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockLOCKRGAuto TuningManual TuningChannel EditChannel LabelData BroadcastingEnterMoveLanguage : EnglishCaption : OffOPTION
WATCHING TV / CHANNEL CONTROL39CHANNEL SETUPAuto Scan (Auto Tuning)Automatically finds all channels available through antenna or cable inputs, and stores them in memory on thechannel list. Run Auto Tuning again after any Antenna/Cable connection changes. Select CCHHAANNNNEELL.Select AAuuttoo TTuunniinngg.Select YYeess.Run AAuuttoo ttuunniinngg.1MENU32ENTER ENTER 4ENTER ■A password is required to gain access toAuto Tuning menu if the Lock System isturned on.5RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData BroadcastingEnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData BroadcastingPress ‘Yes’ button to beginauto tuning.YesNo
WATCHING TV / CHANNEL CONTROL40WATCHING TV / CHANNEL CONTROLSelect CCHHAANNNNEELL.1MENU2ENTER If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qualityof the signal being received.Add/Delete Channel (Manual Tuning)Select MMaannuuaall TTuunniinngg.Select DDIIGGIITTAALLor AANNAALLOOGG.Select channel you want to addor delete.3ENTER 4Select AAdddd or DDeelleettee.5ENTER ■A password is required to gain access toManual Tuning menu if the Lock Systemis turned on.6RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMoveCHANNELEnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData BroadcastingChannelSelect channel type and RF-channel number.FF DIGITALGGFF2GGCloseDeleteDIGITAL 2-1Bad Normal GoodAuto TuningManual TuningChannel EditChannel LabelData Broadcasting
WATCHING TV / CHANNEL CONTROL41Select a channel.Select channel you want to add or delete.3ENTER 4ENTER A custom list can be created by toggling each channel on or off with ENTER button. The channels in the CustomList are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-right corner of the screen.Channel EditingSelect CCHHAANNNNEELL.1MENU2ENTER Select CChhaannnneell EEddiitt.RETURNReturn to TV viewing.Return to the previous menu.5MENUAdd/Delete Move PageCHMove Previous RETURN EXITMENUEnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData Broadcasting+
WATCHING TV / CHANNEL CONTROL42WATCHING TV / CHANNEL CONTROLCHANNEL LABELChoose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for achannel even if you didn't preset a label for the channel.EnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData BroadcastingEnterMoveCHANNELAuto TuningManual TuningChannel EditChannel LabelData BroadcastingLogo FF Disney GGChannel DIGITAL 2-1 CloseSelect CCHHAANNNNEELL.Select CChhaannnneell LLaabbeell.Select Channel.1MENU32ENTER ENTER Select the appropriate logo for the channel.5Select a channel to set logo.46RETURNReturn to the previous menu.MENUReturn to TV viewing.
WATCHING TV / CHANNEL CONTROL43INPUT LIST Select the desired input source.1INPUTTV AV1 AV2ComponentHDMI1 RGB-PCTV AV1 AV2 Component RGB-PCENTER■TTVV: Select it to watch over-the-air, cableand digital cable broadcasts.■AAVV11--22: Select them to watch a VCR orother external equipment.■CCoommppoonneenntt: Select them to watchDVD or a Digital set-top box. ■RRGGBB--PPCC: Select it to view PC input. ■HHDDMMII11--22: Select them to watch highdefinition devices.HDMI2
PICTURE CONTROL44PICTURE SIZE (ASPECT RATIO) CONTROLPICTURE CONTROLThis feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio.NOTE!GGIf a fixed image is displayed on the screen for a long time, the image could become imprinted on thescreen and remain visible. This phenomenon is rare on LCDs, but is possible when the image is on the screen for a very long time.This phenomenon is common to all manufacturers and is not covered by warranty. When watching videothat does not fill the screen, any after-image from the black bars will normally dissipate after a few min-utes.Press the RRAATTIIOObutton repeatedly to select the picture options : SSeett BByy PPrrooggrraamm,, 44::33,, 1166::99,, ZZoooomm11,, ZZoooomm22,, JJuusstt SSccaann.1RATIO2RETURNReturn to TV viewing.1166::99■ You can also adjust AAssppeecctt RRaattiioointhe PPIICCTTUURREEmenu.
PICTURE CONTROL45Set by programSelects the proper picture proportion to matchthe source’s image. 4:3Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio.16 : 9Adjust the picture horizontally, in a linear pro-portion to fill the entire screen.(4:3 4:3)(16:9 16:9)
PICTURE CONTROL46PICTURE CONTROLZoom 1Choose Zoom 1 when you want to view the pic-ture without any alteration. However, the top andbottom portions of the picture will be cropped.Zoom 2Choose Zoom 2 when you want the picture to bealtered, both vertically extended and cropped.The picture taking a halfway trade off betweenalteration and screen coverage.Just Scan Normally the edges of video signals are cropped1-2%. Just Scan turns off this cropping andshows the complete video. Notes: If there is noise on the edges of the originalsignal, it will be visible when Just Scan is activated.JJuusstt SSccaannoperates only withDTV/CADTV/HDMI-DTV/DVI-DTV(720p/1080i/1080p),Component(720p/1080i) input sources.
PICTURE CONTROL47PRESET PICTURE SETTINGSPicture Mode - PresetThere are factory presets for picture settings available in the user menus. You can use a preset, change eachsetting manually.EnterMovePICTUREEAspect Ratio : 16:9Picture Mode : Standard• Back Light 90• Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGEnterMovePICTUREEAspect Ratio : 16:9Picture Mode : Standard• Back Light 90• Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGIntelligent SensorVividStandardCinemaSportGameSelect PPIICCTTUURREE.Select IInntteelllliiggeenntt SSeennssoorr, VViivviidd,SSttaannddaarrdd, CCiinneemmaa, SSppoorrttor GGaammee.1MENU3ENTER Select PPiiccttuurree MMooddee.2ENTER 4RETURNReturn to the previous menu.MENUReturn to TV viewing.■When selecting IInntteelllliiggeenntt SSeennssoorr,the most suitable picture is automaticallyadjusted according to the surroundingconditions.■VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, andGGaammeeSettings are preset for the opti-mum picture quality at the factory andare not adjustable.
PICTURE CONTROL48PICTURE CONTROLColor Tone - PresetChoose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set tocool to see less intense colors with more blue.Select PPIICCTTUURREE.Select CCoolloorr TTeemmppeerraattuurree.1MENU3ENTER Select CCooooll, MMeeddiiuumm, or WWaarrmm.4Select AAddvvaanncceedd CCoonnttrrooll.2ENTER 5RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMovePICTUREEERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)Color TemperatureFFMedium GGFresh ContrastOffFresh ColorOffNoise ReductionAutoGammaMediumBlack LevelMediumEye CareOffCloseFilm ModeOff
PICTURE CONTROL49MANUAL PICTURE ADJUSTMENTPicture Mode - User ModeAdjust the picture appearance to suit your preference and viewing situations.This feature is disable in “PPiiccttuurree MMooddee--IInntteelllliiggeenntt SSeennssoorr”.Select PPIICCTTUURREE.Make appropriate adjustments.Select BBaacckk LLiigghhtt,, CCoonnttrraasstt,, BBrriigghhttnneessss,,SShhaarrppnneessss,, CCoolloorr,, or TTiinntt.. 1MENUSelect PPiiccttuurree MMooddee.2ENTER Select VViivviidd,SSttaannddaarrdd, CCiinneemmaa, SSppoorrttor GGaammee.3ENTER 4ENTER 5ENTER 6RETURNReturn to the previous menu.Return to TV viewing.• Back Light 80EEEEEEEEEnterEnterMovePICTUREEAspect Ratio : 16:9Picture Mode : Standard (User)• Back Light 90• Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGMENU
PICTURE CONTROL50PICTURE CONTROLPICTURE IMPROVEMENT TECHNOLOGYFresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.Noise Reduction: Removes interference up to the point where it does not damage the original picture.Gamma: High gamma values display whitish images and low gamma values display high contrast images.Select PPIICCTTUURREE.Select AAddvvaanncceedd CCoonnttrrooll.Select FFrreesshh CCoonnttrraasstt, FFrreesshh CCoolloorr,NNooiissee RReedduuccttiioonn, or GGaammmmaa.1MENU32ENTER ENTER 5RETURNReturn to the previous menu.Return to TV viewing.Select your desired options.4EnterMovePICTUREERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)MENUEnterMovePICTUREEERG• Contrast 50• Brightness 50• Sharpness 50• Color 50• Tint 0• Advanced Control• ResetScreen (RGB-PC)Color TemperatureMediumFresh ContrastFF Off GGFresh ColorOffNoise ReductionAutoGammaMediumBlack LevelMediumEye CareOffCloseFilm ModeOff

Navigation menu