LG Electronics USA 37LRSMT LCD TV/Monitor User Manual MFL34797007 Edit1

Download:
Mirror Download [FCC.gov]
Document ID	767742
Application ID	KioB/n9oNW76v8AgnJclnQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	224.62kB (2807743 bits)
Date Submitted	2007-03-13 00:00:00
Date Available	2007-03-13 00:00:00
Creation Date	2007-01-30 17:05:28
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2007-01-30 18:00:24
Document Title	MFL34797007-Edit1
Document Creator	3.3: LaserWriter 8 8.7.1
Document Author:	sun

LCD TV
OWNER’S MANUAL
LCD TV MODELS
32LC5DC
37LC5DC
42LC5DC
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
www.lgcommercial.com
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of the cable
entry as practical.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
SAFETY INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING / CAUTION
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate
booklet or sheet, or be located before any operating instructions in an instruction for installation for use and
supplied with the apparatus.
This information shall be given in a language acceptable to the country where the apparatus is intended to
be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety
instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety
information may be included by adding statements after the end of the following safety instruction list. At
the manufacturer’s option, a Opicture or drawing that illustrates the intent of a specific safety instruction may
wn
Ow er Mato that safety instruction :
be placed immediately adjacent
nu
ne
rM
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Ow
ner
Ow
ner
Ma
Ma
nu
anu l
al
nu
al
al
Ow
ner
Ma
nu
al
Do not use this apparatus near water
Clean only with dry cloth.
Ow
ner
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other.
A grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Ow
Ma
ner
nu
Ow
ner
al
Ma
Ma
nu
al
nu
al
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Ow
ner
Ma
nu
al
Ow
ner
nu
al
Ow
ner
Ma
nu
al
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Ma
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
Only use attachments/accessories specified by
the manufacturer.
Ow
ner
anu
al
8
with an exact replacement part by an authorized servicer. Protect the power cord from
physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits
the appliance.
Ow
ner
ner
11
CAUTION concerning the Power Cord :
Most appliances recommend they be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use
of the appliance, and have the cord replaced
Ma
Ma
nu
al
nu
al
Ow
ner
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has exposed to rain
or moisture, does not operate normally, or has
been dropped.
nu
al
Ow
ner
Ow
12
10
Ma
Ma
nu
al
Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or
Electric Shock, Do Not Expose This Appliance
To Rain Or Moisture
13
Wet Location Marking : Apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on or over apparatus.
14
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.
WARNING / CAUTION
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Power
Supply
Short-circuit
Breaker
15
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PICTURE CONTROL
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Watching PIP (Picture-In-Picture)/
POP (Picture-Out-Picture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 37
Preset Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
- EZ Picture - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
- Color Tone - Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Manual Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
- EZ Picture - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
XD - Picture Improvement Technology . . . . . . . . . . . . . 42
Advanced - Cinema 3:2 Pull Down Mode . . . . . . . . . 43
Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 44
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CONTENTS
Feature of this TV
.............................................
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 10
Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
- Auto Scan (EZ Scan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
- Add / Delete Channel (Manual Scan) . . . . . . . . . 31
- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DTV Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
SOUND & LANGUAGE CONTROL
Auto Volume Leveller (EZ SoundRite) . . . . . . . . . . . . . . . 46
Preset Sound Setting (EZ Sound) . . . . . . . . . . . . . . . . . . . . . 47
Sound Setting Adjustment - User Mode . . . . . . . . . . . 48
Balance Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
On-Screen Menus Language Selection . . . . . . . . . . . . . . 53
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
- Analog Broadcasting System Captions . . . . . . . 54
- Digital Broadcasting System Captions . . . . . . . . 55
Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
TIME SETTING
CONTENTS
Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
SCREEN ADJUSTMENT
Auto Configure (RGB(PC) Mode only) . . . . . . . . . . . . . 62
Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Selecting XGA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Initializing (Reset to Original Factory Settings) . 65
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
- Setting up Your Password . . . . . . . . . . . . . . . . . . . . . . . . . 66
- Set Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
- Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
- Movie Rating (MPAA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
- TV Rating Children & General (for USA only) . . 70
- TV Rating English & French (for Canada only) . . 71
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
INTRODUCTION
FEATURE OF THIS TV
INTRODUCTION
LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.
Manufactured under license from Dolby Laboratories.
“Dolby “and the double-D symbol are trademarks of
Dolby Laboratories.
High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
It has 2 HDMI ports that connect audio and video
devices with one cable and produces the highest
quality digital images and sound.
If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor's performance.
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
c. Disposal of this product must be carried out in accordance to the regulations of your local authority.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
INPUT
TV
MODE
TV
POWER
INPUT
PREPARATION
DVD
VCR
MULTI
PIP CH - PIP CH + PIP INPUT
PIP
EZ PIC
EZ SOUND
CC
MENU
EXIT
Owner's Manual
INFO
SWAP
RATIO
SAP
ENTER
TIMER
CH PAGE
VOL
MUTE
1.5V 1.5V
Owner’s Manual
Batteries
FLASH
BACK
Remote Control
Power Cord
32/37 inches model only
2- TV Bracket Bolts
2- TV Brackets,
2- Wall Brackets
Cable Management
Twister Holder
Arrange the wires with
the twister holder.
4-Bolts for stand assembly
(Refer to p.12)
Option Extras
* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior.
D-sub 15 pin Cable
Polishing Cloth
* Do not wipe roughly when removing stain. Please be cautions
of that excessive power may cause scratch or discoloration.
PREPARATION
FRONT PANEL INFORMATION
■
Here shown may be somewhat different from your TV.
Front Panel Controls
PREPARATION
CH
CHANNEL Buttons
VOL
VOLUME Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
ON/OFF Button
If your TV stand has a protection film,
remove it attached to the stand.
Then wipe the stand with polishing cloth.
Remote Control Sensor
Power Standby Indicator
Illuminates red in standby mode.
When the TV is turned on, the indicator blinks
green and then illuminates green before the picture
is displayed.
R
BACK PANEL INFORMATION
VIDEO L/MONO AUDIO R
S-VIDEO Input
Provides better picture quality than the
video input.
11
AUDIO Input
VIDEO Input
Connects the video signal from a video
device.
AV IN 2
PREPARATION
S-VIDEO
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
RESET
SERVICE ONLY
M.P.I.
1(DVI)
UPDATE
RGB IN
RJP
INTERFACE
VIDEO
AUDIO
(MONO)
S-VIDEO
10
VIDEO
AUDIO
COMPONENT IN
AV IN 1
HDMI/DVI IN 1, HDMI IN 2
Connect a HDMI (DVI) connection to either input.
DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
REMOTE
CONTROL
OUT
SPEAKER AUDIO
IN
OUT
(RGB, DVI)
AV (Audio/Video) IN 1
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
COMPONENT IN
Connect a component video/audio device to these
jacks.
M.P.I
RESET/UPDATE/REMOTE CONTROL OUT
10
RJP INTERFACE
SERVICE ONLY
11
RGB IN (PC)
Connect the output from a PC.
AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
12
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
SPEAKER OUT 8Ω
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect an additional equipment, see the External
equipment Connections section.
Install the CABLE MANAGEMENT as shown.
PREPARATION
CABLE MANAGEMENT
Bundle the cables using the supplied twister holder.
! NOTE
Do not hold the CABLE MANAGEMENT when moving
the product.
- If the product is dropped, you may be injured or the
product may be broken.
How to remove the CABLE MANAGEMENT
10
Hold the CABLE MANAGEMENT with both hands and
pull it backward.
TWISTER HOLDER
ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
PREPARATION
■
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
SWIVEL STAND
20°
The TV can be conveniently swivelled on its stand 20° to the left or right to provide the optimum
viewing angle.
11
PREPARATION
STAND INSTALLATION (Only 32/37 inches LCD TV models)
Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.
Assemble the product stand with the product as
shown.
Securely install the 4 bolts provided.
PREPARATION
12
VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
32 inches
37/42 inches
600 mm
100 mm
400 mm
PREPARATION
200 mm
! NOTE
Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
4 inches
4 inches
4 inches
4 inches
CAUTION
Ensure adequate ventilation by following the clearance recommendations.
13
PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
PREPARATION
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
ANTENNA/
CABLE IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the bronze wire
when connecting the antenna.
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
3. Using both cable and antenna
Antenna
RF Coaxial Wire (75 ohm)
Diplexer
(Signal
Combinner)
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
ANTENNA/
CABLE IN
UHF
Signal
Amplifier
Antenna
VHF
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■
! NOTE
14
The TV will let you know when the analog, cable, and digital channel scans are complete.
EXTERNAL EQUIPMENT SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.
When connecting Component cable
1. How to connect
PB
PR
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
■
■
M.P.I.
1(DVI)
2. How to use
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the set.
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red).
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select C o m p o n e n t input source with using the I N P U T
button on the remote control.
Signal
Component
HDMI1/DVI,
HDMI2
480i
Yes
No
480p
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
RJP
RFACE
VIDEO
AUDIO
S-VIDEO
COMPONENT IN
15
EXTERNAL EQUIPMENT SETUP
When connecting HDMI cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to H D M I / D V I I N
1 ( D V I ) or 2 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
HDMI/DVI IN
M.P.I
1(DVI)
2. How to use
■
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
VIDEO
RJP
INTERFACE
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
COMPONENT IN
! NOTE
When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player output
resolution will be automatically set to 720p.
HDMI-DTV OUTPUT
If the device does not support Auto HDMI, you need to set
the output resolution appropriately.
16
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
When connecting HDMI to DVI cable
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
RESET
SERVICE ONLY
M.P.I.
1(DVI)
UPDATE
REMOTE
CONTROL
OUT
RGB IN
VIDEO
RJP
INTERFACE
AUDIO
COMPONENT IN
S-VIDEO
(MONO)
AUDIO
AV IN 1
VIDEO
SPEAKER AUDIO
IN
OUT
(RGB, DVI)
DVI-DTV OUTPUT
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B , D V I) jack on the set.
2. How to use
■
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
■
Select H D M I 1 / D V I or H D M I 2 input source with using the I N P U T button on the remote control.
17
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting Component cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the set.
2. How to use
PB
Turn on the DVD player, insert a DVD.
■
Select C o m p o n e n t input source with using the I N P U T
button on the remote control.
Refer to the DVD player's manual for operating instructions.
HDMI/DVI IN
■
DIGITAL
AUDIO
OUT
(OPTICAL)
RJP
ERFACE
VIDEO
AUDIO
COMPONENT IN
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
18
PB
PR
PB
PR
B-Y
R-Y
Cb
Cr
Pb
Pr
M.P.I.
1(DVI)
■
PR
S-VIDEO
When connecting with an S-Video cable
1. How to connect
Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the set.
Connect the audio outputs of the DVD to the A U D I O
input jacks on the set.
■
Turn on the DVD player, insert a DVD.
■
■
Select A V 1 input source with using the I N P U T button on
the remote control.
If connected to A V I N 2, select A V 2 input source.
■
Refer to the DVD player's manual for operating instructions.
GITAL
UDIO
OUT
TICAL)
RESET
REMOTE
CONTROL
OUT
M.P.I.
UPDATE
S-VIDEO
AUDIO
NT IN
(MONO)
VIDEO
AUDIO
AV IN 1
SPE
When connecting HDMI cable
1. How to connect
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
2. How to use
■
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
■
Refer to the DVD player's manual for operating instructions.
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
EXTERNAL EQUIPMENT SETUP
2. How to use
AUDIO
S-VIDEO
M.P.I.
1(DVI)
VIDEO
RJP
INTERFACE
AUDIO
COMPONENT IN
! NOTE
When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player output resolution will be automatically set to 720p.
HDMI-DVD OUTPUT
If the device does not support Auto HDMI, you need to
set the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the DVD to 720p.
19
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on
the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty
does not cover the product bearing this phenomenon.
■
When connecting with an antenna
EXTERNAL EQUIPMENT SETUP
RGB IN
(PC)
REMOTE
AUDIO IN
(RGB/DVI) CONTROL IN
HDMI IN
ANTENNA/
CABLE IN
S-VIDEO
VIDEO
OPTICAL
ANT OUT
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
DIGITAL AUDIO
OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
Wall Jack
Antenna
1. How to connect
Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
2. How to use
20
■
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
VIDEO
(
When connecting with a RCA cable
1. How to connect
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
TAL
DIO
UT
CAL)
RESET
SERV
REMOTE
CONTROL
OUT
M.P.I.
UPDATE
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select A V 1 input source with using the I N P U T button on
the remote control.
■ If connected to A V I N 2, select A V 2 input source.
(MONO)
S-VIDEO
AUDIO
VIDEO
AUDIO
T IN
AV IN 1
SPEAKE
OUT
■
! NOTE
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L / M O N O jack of the set.
EXTERNAL EQUIPMENT SETUP
2. How to use
When connecting with an S-Video cable
1. How to connect
Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the set.
Connect the audio outputs of the VCR to the A U D I O
input jacks on the set.
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
RESET
SER
M.P.I.
UPDATE
AUDIO
Select A V 1 input source with using the I N P U T button on
the remote control.
■
If connected to A V I N 2, select A V 2 input source.
The picture quality is improved: compared to normal
composite (RCA cable) input.
S-VIDEO
ENT IN
(MONO)
AUDIO
AV IN 1
REMOTE
CONTROL
OUT
VIDEO
SPEAK
OUT
CAUTION
! NOTE
VIDEO
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
■
GITAL
AUDIO
OUT
PTICAL)
2. How to use
■
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
21
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
1. How to connect
VIDEO
2. How to use
■
Select A V 2 input source with using the
I N P U T button on the remote control.
■
If connected to A V I N 1 input, select A V 1
input source.
Operate the corresponding external equipment.
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
S-VIDEO
■
22
Video Game Set
AV IN 2
DIGITAL AUDIO OUTPUT
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
1. How to connect
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
HDMI/DVI IN
M.P.I.
1(DVI)
Set the “TV Speaker option - Off” in the AUDIO
menu. (G p . 5 0). See the external audio equipment
instruction manual for operation.
! NOTE
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p . 5 0)
EXTERNAL EQUIPMENT SETUP
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
DIGITAL
AUDIO
OUT
(OPTICAL)
RJP
NTERFACE
VIDEO
AUDIO
COMPONENT IN
S-V
CAUTION
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
23
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15pin cable
SERVICE ONLY
1. How to connect
REMOTE
CONTROL
OUT
ATE
RGB IN
EXTERNAL EQUIPMENT SETUP
Connect the RGB output of the PC to the R G B I N
jack on the set.
(MONO)
VIDEO
SPEAKER AUDIO
IN
OUT
(RGB, DVI)
AUDIO
AV IN 1
Connect the PC audio output to the A U D I O I N
( R G B , D V I) jack on the set.
2. How to use
■
Turn on the PC and the set.
■
Select R G B - P C input source with using the I N P U T button
on the remote control.
When connecting HDMI to DVI cable
RGB OUTPUT
AUDIO
1. How to connect
Connect the DVI output of the PC to the H D M I / D V I
I N 1 ( D V I ) or 2 jack on the set.
DIGITA
AUDIO
OUT
(OPTICA VICE ONLY
HDMI/DVI IN
1(DVI)
RGB IN
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the set.
ER
VIDEO
RJP
INTERFACE
COMPONENT
2. How to use
■
Turn on the PC and the set
■
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
DVI-PC OUTPUT
24
AUDIO
AUDIO
IN
(RGB, DVI)
! NOTES
To get the the best picture quality, adjust the PC
graphics card to 1024x768, 60Hz.
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
If the video doesn’t fit the screen, try pressing the
ADJUST button to adjust the screen position of TV.
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC output to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of the
PC graphic card.
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal and
Vertical frequencies is separate.
Supported Display Specifications
EXTERNAL EQUIPMENT SETUP
HDMI1/DVI-DTV, HDMI2-DTV mode
RGB-PC, HDMI1/DVI-PC mode
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.469
70.08
640x480
31.469
37.861
37.500
59.94
72.80
75.00
800x600
35.156
37.879
48.077
46.875
56.25
60.31
72.18
75.00
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
31.500
31.470
59.94
60.00
1280x720
44.960
45.000
59.94
60.00
1920x1080
33.720
33.750
59.94
60.00
* RGB-PC mode only: 640x350
25
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Turns your TV or any other programmed equipment on
or off, depending on mode.
TV INPUT In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2
input sources, screen returns to the last TV channel.
WATCHING TV / CHANNEL CONTROL
INPUT External input modes rotate in regular sequence: TV, AV12, Component, RGB, HDMI1/DVI and HDMI2.
(AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2
input sources are linked automatically, only if a device is
connected.)
MODE
TV
POWER
INPUT
DVD
MULTI
VCR
PIP CH - PIP CH + PIP INPUT
PIP
EZ PIC
EZ SOUND
INFO
SWAP
MULTI C
CC
Adjusts brightness on screen.
MENU
EXIT
VCR/DVD
control buttons Control video cassette recorders or DVD players.
RATIO
SAP
ENTER
THUMBSTICK Navigate the on-screen menus and adjust the system
(Up/Down/Left settings to your preference.
/Right/ENTER)
TIMER
VOLUME UP Increase/decrease the sound level.
/DOWN
TIMER Select the amount of time before your TV turns off automatically. G p .6 0
MUTE Switch the sound on or off. G p.28
CHANNEL Select available channels.
UP/DOWN
PAGE Move from one full set of screen information to the next one.
UP/DOWN
NUMBER button
— (DASH) Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
FLASH BACK Tune to the last channel viewed.
26
INPUT
TV
CH PAGE
VOL
MUTE
FLASH
BACK
MODE Select the remote’s operating mode: TV, DVD, VCR.
PIP Switches the sub picture PIP, POP, Twin picture or off mode. G p.35-36
PIP CH +/- Changes the PIP channel. G p . 3 6
PIP INPUT Select the connected input source for the sub-picture. G p . 3 5
EZ PIC Selects the factory preset picture depend on the viewing environment. G p.38
EZ SOUND Selects the factory preset sound for type of program. G p.47
INFO Display information at the top of the screen.
EXIT Clears all on-screen displays and returns to TV viewing from any menu.
CC Select a closed caption. G p.54 (*In DTV/CADTV mode G p.55)
MENU Displays the main menu.
RATIO Change the aspect ratio.
SAP
p.37
Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) G p.51
DTV mode: Changes the audio language.
Installing Batteries
Remote control effective range
INPUT
TV
MODE
TV
POWER
INPUT
DVD
MULTI
VCR
PIP CH - PIP CH + PIP INPUT
PIP
EZ PIC
EZ SOUND
CC
SWAP
MENU
EXIT
■
■
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
Close cover.
WATCHING TV / CHANNEL CONTROL
SWAP Exchange the main/sub images. G p . 3 6
INFO
RATIO
SAP
ENTER
TIMER
VOL
CH PAGE
■
Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
■
Dispose of used batteries in a recycle bin to
preserve environment.
27
WATCHING TV / CHANNEL CONTROL
TURNING ON TV
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
, INPUT, C H (+ or -)) button on the TV or press the POWER, INPUT, TV INPUT, C H (+ or -)),
Number (0~9
9 ) button on the remote control.
Select the viewing source by using the TV INPUT, INPUT button on the
remote control.
■ This TV is programmed to remember which power state it was last set to,
even if the power cord is out.
INPUT
TV
POWER
MODE
TV
INPUT
DVD
MULTI
VCR
TIMER
VOL
CH
PAGE
MUTE
FLASH
BACK
WATCHING TV / CHANNEL CONTROL
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
! NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
CHANNEL SELECTION
TIMER
VOL
CH
PAGE
MUTE
Press the C H + - or NUMBER buttons to select a channel number.
FLASH
BACK
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
Press the V O L + or - button to adjust the volume.
TIMER
VOL
28
MUTE
If you want to switch the sound off, press the M U T E button.
You can cancel the Mute function by pressing the M U T E or V O L + or button.
CH
PAGE
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Press the M E N U button and then use D or E button to select the each menu.
Press the G button and then use D
SETUP
AUDIO
TIME
OPTION
button to display the available menus.
VIDEO
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
AUDIO
SETUP
VIDEO
AUDIO
TIME
OPTION
SETUP
EZ Picture
VIDEO
Color Temperature
AUDIO
XD
TIME
Advanced
OPTION
Video Reset
SCREEN
SCREEN
SCREEN
LOCK
LOCK
LOCK
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
LOCK
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
WATCHING TV / CHANNEL CONTROL
SETUP
VIDEO
E F G
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
SCREEN
SETUP
VIDEO
AUDIO
TIME
TIME
OPTION
Auto config.
Manual config.
XGA Mode
Reset
SETUP
VIDEO
AUDIO
TIME
Aspect Ratio
Caption/Text
Caption Option
SETUP
Manual Clock
AUDIO
Off Timer
TIME
On Timer
Language
OPTION
OPTION
SCREEN
SCREEN
SCREEN
LOCK
LOCK
LOCK
Set ID
Auto Clock
VIDEO
OPTION
Auto Off
29
WATCHING TV / CHANNEL CONTROL
CHANNEL SEARCH
CC
Auto Scan (EZ Scan)
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.
RATIO
SAP
ENTER
TIMER
VOL
CH
PAGE
MUTE
WATCHING TV / CHANNEL CONTROL
SETUP
VIDEO
MENU
EXIT
Press the M E N U button and then use D or E button
to select the S E T U P menu.
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
LOCK
Press the G button and then use D or E button to
select E Z S c a n.
Press the E N T E R button to begin the channel search.
Allow E Z S c a n to complete the channel search cycle
for A N T E N N A and C A B L E.
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
Selection ( G or
) leads you
to the EZ scan screen.
LOCK
SETUP
EZ Scan
VIDEO
Manual Scan
AUDIO
Channel Edit
Processing EZ scan...
TIME
DTV Signal
OPTION
SCREEN
LOCK
Channel Label
Selection ( G or
) leads you
to the EZ scan screen. TV
14
Found channel(s)
Next
30
MENU Prev.
CC
Add/Delete Channel (Manual Scan)
RATIO
MENU
SAP
EXIT
A password is required to gain access to Manual Scan
menu if the Lock System is turned on.
ENTER
TIMER
VOL
CH
PAGE
MUTE
Press the M E N U button and then use D or E button
to select the SETUP menu.
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
LOCK
Press the G button and then use D or E button to
select Manual Scan.
Press the G button and then use D or E button to
select T V, D T V, C A T V, and C A D T V.
SETUP
VIDEO
AUDIO
TIME
Press the G button and then use D or E button to
select channel you want to add or delete.
Press the ENTER button to add or delete the channel.
Press the E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
EZ Scan
Manual Scan
Channel Type
Channel Edit
TV
Number
DTV Signal
Channel Label
WATCHING TV / CHANNEL CONTROL
SETUP
VIDEO
SCREEN
LOCK
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Type
TV
TV
Number
2-0
Channel Label
SCREEN
LOCK
Press
to delete the channel.
31
WATCHING TV / CHANNEL CONTROL
CC
Channel Editing
MENU
RATIO
SAP
EXIT
WATCHING TV / CHANNEL CONTROL
There are two different ways in order to add or delete
scanned channels. One is "Custom List" and the other is
"Favorite List" in the channel list. Both of them are available
after EZ Scan on the SETUP menu.
A Custom List can be created by toggling each channel on
or off with ENTER button. The channels in the Custom List
are displayed in black, and the channels deleted from the
Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
LOCK
Press the M E N U button and then use D or E button
to select the SETUP menu.
SETUP
Press the G button and then use D or E button to
select C h a n n e l E d i t.
VIDEO
AUDIO
TIME
OPTION
Press the G button and then use D or E button to
select channel and then use the ENTER button to add
or delete it.
TV
EZ Scan
2-0
Manual Scan
Channel Edit
4-0
6-0
DTV Signal
9-0
Channel Label
SCREEN
11-0
LOCK
13-0
14-0
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Scan
TV
Manual Scan
2-0
Channel Edit
4-0
DTV Signal
6-0
Channel Label
9-0
SCREEN
11-0
LOCK
13-0
14-0
Delete
32
DTV SIGNAL STRENGTH
CC
This feature displays the DTV signal levels being received
and indicates whether you need to adjust your antenna or
digital cable input. The higher the signal strength, the less
likely you are to experience picture degradation.
DTV Signal: This function is only available when the input
signal is DTV or CADTV.
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
Press the M E N U button and then use D or E button
to select the S E T U P menu.
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
LOCK
Press the G button and then use D or E button to
select D T V S i g n a l .
View the on-screen signal strength monitor to see
the quality of the signal being received.
SETUP
VIDEO
AUDIO
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
EZ Scan
Manual Scan
Channel Edit
Bad
Normal
Good
DTV Signal
WATCHING TV / CHANNEL CONTROL
SETUP
VIDEO
Channel Label
SCREEN
LOCK
33
WATCHING TV / CHANNEL CONTROL
CHANNEL LABEL
CC
Changes the picture source so you can watch your off-air
TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
WATCHING TV / CHANNEL CONTROL
SETUP
Press the M E N U button and then use
to select the S E T U P menu.
or
VIDEO
button
AUDIO
TIME
OPTION
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
SCREEN
LOCK
Press the G button and then use
select I n p u t S o u r c e .
or
button to
Press the G button and then use D or E button to
select the source: T V, A V 1, A V 2, C o m p o n e n t,
R G B - P C, H D M I 1 / D V I, or H D M I 2.
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
Ch.
TV 2-0
Logo
No Logo
LOCK
34
PICTURE CONTROL
WATCHING PIP (PICTURE-IN-PICTURE)/
POP (PICTURE-OUT-PICTURE)
PIP lets you view 2 different inputs (sources) on your TV screen at the same time.
One source will be large, and the other source will show a smaller inset image.
Twin Picture mode splits the screen into two images, allowing two picture sources
to be shown on the TV screen at the same time. Each source is given half the
screen.
INPUT
TV
INPUT
DVD
MULTI
VCR
PIP
EZ PIC
PIP CH - PIP CH + PIP INPUT
EZ SOUND
CC
Press the P I P button to access the sub picture.
Each press of PIP changes the PIP options as shown below.
DW1 Mode
SWAP
MENU
INFO
RATIO
SAP
EXIT
Watching PIP/Double Window/POP
PIP Mode
MODE
TV
POWER
ENTER
DW2 Mode
PICTURE CONTROL
POP Mode
PIP Off
Selecting an Input Signal Source for PIP/Double Window
Use the P I P I N P U T button to select the input source for the sub picture.
Each press of P I P I N P U T button changes the PIP source.
Use the P I P I N P U T button to select the input source for the sub picture. Each press of PIP INPUT button
changes the PIP source. You can also select sources for the Sub Input in the SETUP menu.
Main Picture Source
Available Sub Picture Sources
DTV/CADTV
Analog (TV/CATV), AV1, and AV2
TV/CATV, AV1, AV2,
Component, RGB
DTV/CADTV, Analog(TV/CATV), AV1, and AV2
HDMI1/DVI, HDMI2
35
PICTURE CONTROL
Moving the PIP Sub Picture
In PIP mode, press the D E F G button to move the sub
picture to a different location on the screen.
TV Program Selection for PIP
PICTURE CONTROL
Use the P I P C H + / - button to select a channel for the sub picture.
The selected channel number is displayed just below the input source of main picture.
Adjusting Main and Sub Picture Sizes for Twin Picture
Repeatedly, use the S W A P button to switch the main and sub pictures.
■
Component, RGB, HDMI1/DVI, HDMI2 input sources for the main picture can’t be used to swap the
main and sub pictures.
POP (Picture-out-of-Picture : Channel Scan)
Use POP to search the programs of all the memorized channels
one-by-one on the 3 PIP screen display, (while the main picture
source remains the current channel). The pictures of all the
programmed channels are searched with the 3 POP screens.
36
PICTURE SIZE (ASPECT RATIO) CONTROL
INPUT
TV
This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you
need to specify how the picture is to be displayed.
■ RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
MODE
TV
POWER
INPUT
DVD
MULTI
VCR
PIP
EZ PIC
PIP CH - PIP CH + PIP INPUT
EZ SOUND
SWAP
INFO
! NOTE
If a fixed image is displayed on the screen for a long time, the image may
become imprinted on the screen and remain visible.
This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
CC
MENU
RATIO
SAP
EXIT
ENTER
Press the RATIO button repeatedly to select the desired picture format.
■ You can also adjust A s p e c t R a t i o in the O P T I O N menu.
Horizon
Selects the proper picture proportion to match
the source’s image.
The screen size is, more enlarged at both sides,
to create a spectacular view.
(4:3
4:3)
(16:9
16:9)
PICTURE CONTROL
Set by program
Horizon
Set By Program
Set By Program
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Zoom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom 1
4:3
Zoom 2
16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Choose Zoom 2 when you want the picture to
be altered, both vertically extended and
cropped. The picture taking a halfway trade off
between alteration and screen coverage.
16:9
Zoom 2
37
PICTURE CONTROL
PRESET PICTURE SETTINGS
INPUT
TV
EZ Picture - Preset
INPUT
DVD
MULTI
VCR
PIP
EZ Picture adjusts the TV for the best picture appearance. Select
the preset value in the EZ Picture menu based on the program
category.
Daylight, Normal, Night Time Settings are preset for the optimum picture quality at the factory and are not adjustable.
In the U s e r 1 and U s e r 2 modes only, user can directly adjust
the contrast, brightness, color, sharpness, tint.
EZ PIC
PIP CH - PIP CH + PIP INPUT
EZ SOUND
CC
SWAP
MENU
PICTURE CONTROL
■
Press the E Z P I C button repeatedly to select the picture
appearance setup option as below :
D a y l i g h t, N o r m a l, N i g h t T i m e, U s e r 1, and U s e r 2
(your own settings).
Press the E X I T button to save and return to TV viewing.
You can also use the VIDEO menu to adjust E Z P i c t u r e.
SETUP
VIDEO
AUDIO
TIME
OPTION
38
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
SCREEN
LOCK
LOCK
EZ Picture
Daylight
Color Temperature
Normal
XD
Night time
Advanced
User 1
Reset
User 2
INFO
RATIO
SAP
EXIT
ENTER
MODE
TV
POWER
Color Tone - Preset
CC
MENU
RATIO
SAP
EXIT
Choose one of three automatic color adjustments. Set to
warm to enhance hotter colors such as red, or set to cool
to see less intense colors with more blue.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the V I D E O menu.
or
VIDEO
button
AUDIO
TIME
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
LOCK
Press the G button and then use
select C o l o r T e m p e r a t u r e.
or
button to
Press the G button and then use D or E button to
select either C o o l, N o r m a l, W a r m or U s e r.
SETUP
VIDEO
AUDIO
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
PICTURE CONTROL
OPTION
EZ Picture
Color Temperature
Cool
XD
Normal
Advanced
Warm
Reset
User
SCREEN
LOCK
39
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
EZ Picture - User Mode
CC
MENU
RATIO
SAP
EXIT
Adjust the picture appearance to suit your preference and
viewing situations.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the V I D E O menu.
or
EZ Picture
VIDEO
button
Color Temperature
AUDIO
XD
TIME
Advanced
PICTURE CONTROL
OPTION
Video Reset
SCREEN
LOCK
Press the G button and then use
select E Z P i c t u r e.
or
button to
Press the G button and then use
select U s e r 1 or U s e r 2.
or
button to
SETUP
EZ Picture
Daylight
Color Temperature
Normal
XD
Night Time
Advanced
User 1
Reset
User 2
VIDEO
AUDIO
TIME
OPTION
SCREEN
Press the G button and then use D or E button to
select the desired picture option ( C o n t r a s t ,
B r i g h t n e s s, C o l o r, S h a r p n e s s, or T i n t) .
LOCK
SETUP
Press the G button and then use
make appropriate adjustments.
or
button to
VIDEO
User1
AUDIO
Contrast
85
Brightness
50
OPTION
Color
50
SCREEN
Sharpness
50
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
LOCK
Tint
SETUP
VIDEO
Contrast
AUDIO
85 F
TIME
OPTION
SCREEN
LOCK
40
Color Tone - User Mode
CC
MENU
RATIO
SAP
EXIT
You can also adjust the detailed settings (Red, Green, Blue)
by selecting the C o l o r T e m p e r a t u r e - U s e r menu.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the V I D E O menu.
or
button
VIDEO
AUDIO
TIME
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
Press the G button and then use
select C o l o r T e m p e r a t u r e.
or
LOCK
button to
Press the G button and then use
select U s e r.
or
button to
SETUP
VIDEO
AUDIO
TIME
OPTION
Press the G button and then use
select R e d, G r e e n, or B l u e.
or
button to
Press the G button and then use
make appropriate adjustments.
or
button to
■
The adjustment range of R G B, G r e e n, or B l u e is
-20~ +20.
EZ Picture
Color Temperature
Cool
XD
Normal
Advanced
Warm
Reset
User
PICTURE CONTROL
OPTION
SCREEN
LOCK
SETUP
VIDEO
User
AUDIO
Red
Green
Blue
TIME
OPTION
SCREEN
LOCK
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
VIDEO
AUDIO
Red
0 F
TIME
OPTION
SCREEN
LOCK
41
PICTURE CONTROL
XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG Electronic’s unique picture improving technology
to display a real HD source through an advanced digital signal processing algorithm.
When selecting EZ Picture options (Daylight, Normal and
Night time), XD is automatically changed to Auto.
When selecting EZ Picture options (User 1 and User 2), you
can choose the Auto / Manual.
When selecting the Manual, you can adjust the XD
Contrast, XD color and XD Noise.
CC
MENU
SAP
ENTER
TIMER
VOL
CH
SETUP
or
VIDEO
button
AUDIO
PICTURE CONTROL
TIME
OPTION
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
Press the G button and then use
select X D.
Press the G button and then use
select A u t o or M a n u a l.
or
or
button to
button to
LOCK
Selecting the Manual
1. Press the G button and then use D or E button to
select X D C o n t r a s t, X D C o l o r or X D N R
( N o i s e ), M P E G N R.
■ X D C o n t r a s t : Optimizing the contrast automatically according to the brightness of the
reflection.
■ X D C o l o r : Adjusting the colors of the reflection
automatically to reproduce as closely as possible
to the natural colors.
■ X D N R ( N o i s e ) : Removing the noise up to the
point where it does not damage the original picture.
■ M P E G N R : To reduce the picture noise which may
appear on the screen during watching the TV.
2. Press the F or G button to select O n or O f f.
42
PAGE
MUTE
Press the M E N U button and then use
to select the V I D E O menu.
RATIO
EXIT
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Picture
Color Temperature
XD
Advanced
Reset
Auto
Manual
XD Contrast
On
SCREEN
LOCK
XD Color
On
XD NR
Off
MPEG NR
ADVANCED - CINEMA 3:2 PULL DOWN MODE
Set up the TV for the best picture appearance for viewing
movies.
CC
RATIO
MENU
SAP
EXIT
When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode
or Cinema Correction Mode), the TV will adjust 24 fps
video from movies to 30 fps video for display.
This feature operates only in Analog, AV1, AV2, and
Component 480i mode.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use
to select the V I D E O menu.
or
button
AUDIO
TIME
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
Press the G button and then use
select A d v a n c e d.
or
button to
Press the G button and then use
select C i n e m a 3 : 2 M o d e.
or
button to
LOCK
SETUP
VIDEO
AUDIO
TIME
Press the G button and then use
select O n or O f f.
or
button to
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
SCREEN
LOCK
EZ Picture
Color Temperature
PICTURE CONTROL
OPTION
XD
Advanced
Cinema
Off
Reset
Black level
Low
43
PICTURE CONTROL
ADVANCED - BLACK (DARKNESS) LEVEL
Adjusting the contrast and the brightness of the screen
using the black level of the screen.
This feature operates only in AV1, AV2, HDMI1/DVI, or
HDMI2mode.
CC
RATIO
MENU
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the V I D E O menu.
or
button
VIDEO
AUDIO
TIME
PICTURE CONTROL
OPTION
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
Press the G button and then use
select A d v a n c e d.
or
button to
Press the G button and then use
select B l a c k l e v e l.
or
button to
LOCK
SETUP
VIDEO
Press the G button and then use
select L o w or H i g h.
■ Low
The screen gets darker.
■ High
The screen gets brighter.
or
button to
AUDIO
TIME
OPTION
SCREEN
LOCK
EZ Picture
Color Temperature
XD
Advanced
Cinema
Off
Reset
Black level
Low
44
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
PICTURE RESET
Use to quickly reset all the Video menu options to their
original factory preset values.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the VIDEO menu.
or
VIDEO
button
AUDIO
TIME
EZ Picture
Color Temperature
XD
Advanced
Video Reset
SCREEN
LOCK
Press the G button and then use
select Video Reset.
or
button to
Press the G button to reset the Video menu options to
original values.
SETUP
VIDEO
AUDIO
TIME
OPTION
EZ Picture
PICTURE CONTROL
OPTION
Color Temperature
XD
Advanced
Reset
To set
SCREEN
LOCK
45
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (EZ SOUNDRITE)
Scans for changes in sound levels during commercials, then
adjusts the sound to match the specified audio level.
SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV
program.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use D or E button
to select the A U D I O menu.
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
SCREEN
LOCK
SOUND & LANGUAGE CONTROL
46
Press the G button and then use D or E button to
select E Z S o u n d R i t e.
Press the G button and then use
select O n or O f f.
or
button to
SETUP
VIDEO
AUDIO
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
Audio Language
EZ SoundRite
Balance
Off
On
EZ Sound
TV Speaker
SCREEN
LOCK
PRESET SOUND SETTINGS (EZ SOUND)
INPUT
TV
INPUT
DVD
MULTI
VCR
PIP
EZ PIC
EZ Sound lets you enjoy the best sound without any special
adjustment because the TV sets the appropriate sound options
based on the program content.
Normal, Stadium, News, Music and Theater are preset for good
sound quality at the factory and are not adjustable.
MODE
TV
POWER
PIP CH - PIP CH + PIP INPUT
EZ SOUND
CC
SWAP
MENU
INFO
RATIO
SAP
EXIT
ENTER
■
Press E X I T button to return to TV viewing.
You can also adjust E Z S o u n d in the AUDIO menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
SETUP
Audio Language
VIDEO
EZ SoundRite
AUDIO
EZ Sound
TIME
Balance
Speaker
OPTION
SCREEN
SCREEN
LOCK
LOCK
Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speaker
Normal
Stadium
SOUND & LANGUAGE CONTROL
Press the E Z S O U N D button repeatedly to select the
appropriate sound setup as below :
N o r m a l, S t a d i u m, N e w s, M u s i c, T h e a t e r, and U s e r
(your own settings).
News
Music
Theater
User
47
SOUND &LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
SETUP
Press the M E N U button and then use
to select the A U D I O menu.
VIDEO
or
button
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
SCREEN
LOCK
Press the G button and then use
select E Z S o u n d.
or
button to
Press the G button and then use
select U s e r.
or
button to
SETUP
VIDEO
AUDIO
TIME
OPTION
SOUND & LANGUAGE CONTROL
Press the G button and then use D or E button to
T r e b l e, B a s s, or
select the desired sound option (T
F r o n t S u r r o u n d).
Audio Language
Normal
EZ SoundRite
Stadium
EZ Sound
Balance
News
Music
TV Speaker
SCREEN
Theater
LOCK
User
Selection ( G or
) leads you
to the detailed setting
screen.
Press the G button and then use
make appropriate adjustments.
or
button to
Selecting the Front surround
Press the G button and then use F or G button to
select O f f or 3 D E c h o S o u n d S y s t e m.
SETUP
VIDEO
User
AUDIO
Treble
50
Bass
50
TIME
OPTION
Front Surround
Off
SCREEN
LOCK
Press
MENU
to confirm.
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
VIDEO
AUDIO
TIME
Front Surround
Off
OPTION
3D EchoSound System
Creates a stunning simulated stereo effect from any mono
sound and a realistic three-dimensional sound with a very
wide and deep sound stage.
SCREEN
LOCK
48
BALANCE ADJUSTMENT
Adjust the left/right sound of speaker to suit your taste and
room situations.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use D or E button
to select the A U D I O menu.
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
SCREEN
LOCK
SOUND & LANGUAGE CONTROL
Press the G button and then use D or E button to
select B a l a n c e.
Press the G button and then use F or G button to
make appropriate adjustments.
SETUP
VIDEO
AUDIO
TIME
OPTION
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speaker
SCREEN
LOCK
SETUP
VIDEO
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speaker
SCREEN
LOCK
49
SOUND &LANGUAGE CONTROL
TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.
Feature turns the TV Speakers option On or Off.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use D or E button
to select the A U D I O menu.
VIDEO
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
SCREEN
SOUND & LANGUAGE CONTROL
50
Press the G button and then use D or E button to
select T V S p e a k e r.
Press the G button and then use D or E button to
select O n or O f f.
LOCK
SETUP
VIDEO
AUDIO
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
SCREEN
Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speaker
Off
On
LOCK
STEREO/SAP BROADCAST SETUP
INPUT
TV
MODE
TV
POWER
INPUT
This TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well
as the original one and when you select Stereo or SAP on the
remote control.
Mono sound is automatically received if the broadcast is only in
Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to the mono sound in remote
areas during stereo/SAP broadcasting.
Stereo or SAP can be received in Analog channel.
VCR
MULTI
PIP
EZ PIC
PIP CH - PIP CH + PIP INPUT
EZ SOUND
CC
SWAP
MENU
INFO
RATIO
SAP
EXIT
ENTER
Use the S A P button to select your desired MTS mode in
analog signal. Each time you press the S A P button, M o n o,
S t e r e o, or S A P appear in turn.
■ If other languages available on the digital signal, select
them with the S A P button.
Press E X I T button to save and return to TV viewing.
SOUND & LANGUAGE CONTROL
DVD
51
SOUND &LANGUAGE CONTROL
AUDIO LANGUAGE
Other languages may be available if a digital signal is provided by the broadcasting station.
This feature operates only in DTV/CADTV mode.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use D or E button
to select the A U D I O menu.
AUDIO
TIME
OPTION
Audio Language
EZ SoundRite
EZ Sound
Balance
Speaker
SCREEN
LOCK
SOUND & LANGUAGE CONTROL
52
Press the G button and then use D or E button to
select A u d i o L a n g u a g e.
Press the G button and then use D or E button to
select : E n g l i s h, S p a n i s h, or F r e n c h.
SETUP
VIDEO
AUDIO
TIME
Audio Language
English
EZ Sound
Spanish
Balance
French
TV Speaker
OPTION
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SCREEN
LOCK
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select your language.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Aspect Ratio
VIDEO
Press the M E N U button and then use D or E button
to select the O P T I O N menu.
Caption/Text
AUDIO
Caption Option
TIME
Language
OPTION
Set ID
SCREEN
LOCK
Press the G button and then use D or E button to
select your desired language.
From this point on, the on-screen menus will be shown
in the selected language.
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK
Aspect Ratio
Caption/Text
Caption Option
Language
Set ID
English
Español (Spanish)
Français (French)
Press the E X I T button to return to TV viewing or
press M E N U to return to the previous menu.
SOUND & LANGUAGE CONTROL
Press the G button and then use D or E button to
select L a n g u a g e .
53
SOUND &LANGUAGE CONTROL
CAPTION / TEXT
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a
program. Analog caption displays information at any position on the screen and
is usually the program's dialog.
Text displays information, usually at the bottom position and is used for a data
service, generally not program related.
Caption/Text, if provided by the broadcaster, would be available for both digital
and analog channels on the Antenna/Cable.
This TV is programmed to memorize the caption/text mode which was last set
when you turn the power off.
When you select the CC1 ~ Text4, Caption option must be disabled.
SOUND & LANGUAGE CONTROL
54
Use the C C button repeatedly to select Caption O f f, C C 1, C C 2, C C 3,
C C 4, T e x t 1, T e x t 2, T e x t 3 or T e x t 4.
CAPTION
The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
■ TEXT
The term for the words that appear in a large black frame and almost cover
the entire screen; usually messages provided by the broadcaster.
■
■
Press E X I T to save and return to TV viewing.
T e x t.
You can also use the O P T I O N menu to select C a p t i o n/T
INPUT
TV
MODE
TV
POWER
INPUT
DVD
MULTI
VCR
PIP
EZ PIC
PIP CH - PIP CH + PIP INPUT
EZ SOUND
CC
SWAP
MENU
INFO
RATIO
SAP
EXIT
ENTER
Digital Broadcasting System Captions
CC
MENU
RATIO
SAP
EXIT
Choose the language you want the DTV/CADTV Captions
to appear in.
Other Languages can be chosen for digital sources only if
they are included on the program.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use D or E button
to select the O P T I O N menu.
AUDIO
TIME
Aspect Ratio
Caption/Text
Caption Option
Language
OPTION
Set ID
SCREEN
LOCK
Press the G button and then use D or E button to
T e x t.
select C a p t i o n/T
Press the G button and then use D or E button to
select available caption languages : E n g l i s h, S p a n i s h
or F r e n c h.
SETUP
VIDEO
AUDIO
TIME
OPTION
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Aspect Ratio
Caption/Text
Off
Caption Option
English
Language
Spanish
Set ID
French
SCREEN
LOCK
SOUND & LANGUAGE CONTROL
55
SOUND &LANGUAGE CONTROL
CAPTION OPTION
Customize the DTV/CADTV captions that appear on your
screen.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use D or E button
to select the O P T I O N menu.
AUDIO
TIME
Aspect Ratio
Caption/Text
Caption Option
Language
OPTION
Set ID
SCREEN
LOCK
SOUND & LANGUAGE CONTROL
Press the G button and then use D or E button to
select C a p t i o n O p t i o n.
Press the G button and then use D or E button to
select C u s t o m.
SETUP
VIDEO
AUDIO
Press the G button and then use D or E button to
customize the S t y l e, F o n t, etc., to your preference.
A preview icon is provided at the bottom of the
screen, use it to see the caption language.
S i z e : Set the word size.
G F o n t : Select a typeface for the text.
G Text Color : Choose a color for the text.
G Text Opacity : Specify the opacity for the text color.
G B g (Background) C o l o r : Select a background color.
G B g (Background) O p a c i t y : Select the opacity for
the background color.
G Edge Type : Select an edge type.
G Edge Color : Select a color for the edges.
TIME
Aspect Ratio
Caption/Text
Caption Option
OPTION
SCREEN
Set by Program
Custom
Language
Set ID
LOCK
SETUP
VIDEO
Size
AUDIO
Font
Font 0
Text Color
White
TIME
A Standard
OPTION
Text Opacity
Solid
SCREEN
Bg Color
Black
LOCK
Bg Opacity
Solid
Edge Type
None
Edge Color
Black
56
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
TIME SETTING
CLOCK SETTING
Auto Clock Setup
CC
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the
current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly
by the auto clock function.
The factory default value of the Auto Clock is Off, because
a clock information sent each broadcasting station is different.
RATIO
SAP
ENTER
TIMER
VOL
Press the M E N U button and then use
to select the T I M E menu.
or
CH
PAGE
MUTE
MENU
EXIT
button
SETUP
Auto Clock
VIDEO
Manual Clock
AUDIO
Off Timer
TIME
On Timer
Press the G button and then use
select O n.
or
OPTION
button to
Auto Off
SCREEN
LOCK
or
button to
Press the G button and then use D or E button to
select your viewing area time zone:
U.S.A : E a s t e r n , C e n t r a l , M o u n t a i n , P a c i f i c ,
A l a s k a or H a w a i i.
Canada : E a s t e r n , C e n t r a l , M o u n t a i n , P a c i f i c ,
N e w F . l a n d or A t l a n t i c.
Press the G button and then use D or E button to
select A u t o, O f f, O n, depending on whether or not
your viewing area observes Daylight Saving time.
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
Auto Clock
VIDEO
Manual Clock
Off
On
TIME SETTING
Press the G button and then use
select A u t o C l o c k.
AUDIO
Off Timer
TIME
Time Zone
On Timer
OPTION
SCREEN
Auto Off
Eastern
Daylight Saving
Auto
LOCK
57
TIME SETTING
Manual Clock Setup
CC
MENU
RATIO
SAP
EXIT
If the current time setting is wrong, reset the clock manually.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the T I M E menu.
or
button
Auto Clock
VIDEO
Manual Clock
AUDIO
Off Timer
TIME
On Timer
OPTION
Auto Off
SCREEN
Press the G button and then use
select M a n u a l C l o c k.
Press the G button and then use F or
either the year, date, or time option.
or
button to
LOCK
TIME SETTING
to select
SETUP
VIDEO
AUDIO
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
TIME
OPTION
Auto Clock
Manual Clock
--
--
AM
Off Timer
On Timer
Auto Off
SCREEN
LOCK
58
AUTO ON/OFF TIMER SETTING
The timer function operates only if the current time has
been set.
The Off-Timer function overrides the On-Timer function if
they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV
turns on with the On Timer function, the TV will automatically revert to standby mode.
CC
MENU
SAP
ENTER
TIMER
VOL
CH
Press the M E N U button and then use
to select the T I M E menu.
or
PAGE
MUTE
RATIO
EXIT
button
SETUP
Auto Clock
VIDEO
Manual Clock
AUDIO
Off Timer
TIME
On Timer
OPTION
Press the G button and then use
select O f f T i m e r or O n T i m e r.
Press the G button and then use D or E button to
select O n.
■ To cancel the O n / O f f t i m e r function, select O f f.
or
button to
LOCK
SETUP
VIDEO
AUDIO
Press the G button and then use D or E button to set
the hour.
TIME
OPTION
Auto Clock
Manual Clock
Off Timer
On Timer
Auto Off
Off
On
SCREEN
LOCK
Auto Off
SCREEN
Time 6 : 30 AM
Press the G button and then use D or E button to set
the minutes.
TIME SETTING
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
59
TIME SETTING
SLEEP TIMER SETTING
TIMER
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME SETTING
60
Press the T I M E R button repeatedly to select the number of
minutes. First the O f f option appears on the screen, followed
by the following sleep timer options : 10, 20, 30, 60, 90,
120, 180, and 240 minutes.
When the number of minutes you want is displayed on the
screen, press the E N T E R button. The timer begins to count
down from the number of minutes selected.
To check the remaining minutes before the TV turns off, press
the T I M E R button once.
To cancel the Sleep Timer, press the T I M E R button repeatedly to select O f f.
VOL
CH
MUTE
FLASH
BACK
PAGE
AUTO SHUT-OFF SETTING
If set to on and there is no input signal, the TV turns off
automatically after 10 minutes.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Auto Clock
VIDEO
Press the M E N U button and then use D or E button
to select the T I M E menu.
Manual Clock
AUDIO
Off Timer
TIME
On Timer
OPTION
Auto Off
SCREEN
LOCK
Press the G button and then use D or E button to
select A u t o O f f.
Press the G button and then use D or E button to
select O n or O f f.
SETUP
Auto Clock
If set to On and there is
Manual Clock
no input signal, the TV
VIDEO
AUDIO
turned off automatically
Off Timer
after 10 minutes.
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
TIME SETTING
On Timer
OPTION
SCREEN
Auto Off
Off
On
LOCK
61
SCREEN ADJUSTMENT
AUTO CONFIGURE (RGB [PC] MODE ONLY)
Automatically adjusts picture position and minimizes image
shaking.
Although the image is still not correct, your set is functioning
properly but needs further adjustment.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the S C R E E N menu.
VIDEO
or E button
AUDIO
TIME
Auto config.
Manual config.
XGA Mode
Reset
OPTION
SCREEN
LOCK
Press the G button and then use
select A u t o c o n f i g ..
or E button to
SCREEN ADJUSTMENT
SETUP
When A u t o c o n f i g . has finished, O K will be
shown on screen.
■ If the position of the image is still not correct, try
Auto adjustment again.
■
VIDEO
AUDIO
TIME
Auto config.
To set
Manual config.
XGA Mode
Reset
OPTION
SCREEN
LOCK
62
Press the G button to start A u t o c o n f i g ..
If the picture needs to be adjusted more after Auto
adjustment in RGB (PC), you can adjust the M a n u a l
c o n f i g ..
Press the E X I T button to return to TV viewing or
press the M E N U button to return to the previous
menu.
2 3
MANUAL CONFIGURE
If the picture isn’t clear after auto adjustment and especially
if characters are still trembling, adjust the picture phase
manually.
This function works in the following mode : RGB-PC, RGB-DTV,
Component 480p/720p/1080i, HDMI 480p/720p/1080i.
The Phase, Clock functions work in the following mode: RGBPC mode.
CC
MENU
RATIO
SAP
EXIT
ENTER
TIMER
VOL
CH
PAGE
MUTE
Press the M E N U button and then use
to select the S C R E E N menu.
SETUP
AUDIO
or E button
VIDEO
Press the G button and then use
select M a n u a l c o n f i g ..
TIME
or E button to
Auto config.
Manual config.
XGA Mode
Reset
OPTION
SCREEN
LOCK
Press the G button and then use D or E button to
select P h a s e, C l o c k, H - p o s i t i o n or V - p o s i t i o n.
Press the F or G button to make appropriate adjustments.
Press the E X I T button to return to TV viewing or
press the M E N U button to return to the previous
menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
Auto config.
Manual config.
Phase
XGA Mode
Clock
Reset
H-Position
V-Position
SCREEN
LOCK
SCREEN ADJUSTMENT
Phase
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
■ Clock
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
■ H-position / V-position
This function is to adjust picture to left/right and
up/down as you prefer.
■
2 3 4
63
SCREEN ADJUSTMENT
SELECTING XGA MODE
To see a normal picture, match the resolution of RGB mode and
selection of XGA mode.
CC
MENU
RATIO
SAP
EXIT
ENTER
This function works in the following mode: RGB-PC mode.
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
Press the M E N U button and then use
to select the S C R E E N menu.
or E button
AUDIO
TIME
Auto config.
Manual config.
XGA Mode
Reset
OPTION
SCREEN
LOCK
Press the G button and then use
select X G A m o d e.
or E button to
SCREEN ADJUSTMENT
Press the G button and then use D or E button to
select the desired XGA resolution.
SETUP
VIDEO
AUDIO
TIME
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
OPTION
SCREEN
LOCK
Auto config.
Manual config.
XGA Mode
1024 x 768
ARC
1280 x 768
PIP Transparency
1360 x 768
Reset
1366 x 768
2 3
64
INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
CC
MENU
RATIO
SAP
EXIT
This function operates in current mode.
To initialize the adjusted value.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
Press the M E N U button and then use
to select the S C R E E N menu.
VIDEO
or E button
AUDIO
TIME
Auto config.
Manual config.
XGA Mode
Reset
OPTION
SCREEN
LOCK
Press the G button and then use
select R e s e t.
or E button to
Press the G button.
SETUP
AUDIO
TIME
Auto config.
Manual config.
XGA Mode
Reset
To set
OPTION
SCREEN
LOCK
2 3
SCREEN ADJUSTMENT
• You can initialize Position, PIP size, PIP position. (PIP
size and PIP position are available to work in PIP
mode only.)
VIDEO
65
PARENTAL CONTROL / RATINGS
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings
sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be
done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television
movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown
at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including made-for-TV movies :
TV-G
■ TV-PG
■ TV-14
■
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
PARENTAL CONTROL / RATING
SET PASSWORD & LOCK SYSTEM
Setting up your password
Set up blocking schemes to block specific channels, ratings, and
external viewing sources.
A password is required to gain access to this menu.
CC
MENU
ENTER
Press the M E N U button and then use the D or E button
to select the L O C K menu. Then, press the G button.
Enter the password as requested.
■ The TV is set up with the initial
password “0-0-0-0”.
Enter
Password
Enter
Password
RATIO
SAP
EXIT
■
66
TV-MA (Mature audience only)
(All children)
■ TV-Y
■ TV-Y7 (Children 7 years older)
■
TIMER
VOL
CH
MUTE
PAGE
Set Password
Change the password by inputting a new password twice.
SETUP
VIDEO
After inputting the password, use the D or E button
to choose S e t p a s s w o r d.
AUDIO
TIME
OPTION
Press the G button and then choose any 4 digits for
your new password.
As soon as the 4 digits are entered, re-enter the same
4 digits on the C o n f i r m.
Then your changed password has been memorized.
Press E X I T to return to TV viewing or press M E N U
to return to the previous menu.
SCREEN
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
SETUP
VIDEO
AUDIO
OPTION
Set Password
LOCK
TIME
! NOTE
Lock System
SCREEN
LOCK
Lock System
Set Password
Block Channel
New
Confirm
* * * *
* * * *
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’
on the remote control.
Lock System
Enables or disables the blocking scheme you set up previously.
SETUP
AUDIO
TIME
After inputting the password, use the D or E button
to choose L o c k S y s t e m.
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
Press the G button and then use the D or E button
to select O n or O f f.
■
When you select O n, the Lock System is enable.
SETUP
VIDEO
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
AUDIO
TIME
OPTION
SCREEN
LOCK
Lock System
Set Password
Off
On
Block Channel
PARENTAL CONTROL / RATING
VIDEO
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
67
PARENTAL CONTROL /RATINGS
CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that
you do not want your children to watch.
SETUP
VIDEO
AUDIO
TIME
After inputting the password, use the
to choose B l o c k C h a n n e l.
or E button
OPTION
SCREEN
LOCK
Lock System
Set Password
Block Channel
Selection ( G or
) leads you
to the block channel screen.
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Press the G button. You will now see a screen filled
with channel numbers and a preview picture.
Use D E F G button to select a channel and then
use the E N T E R button to block or unblock it.
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
EXTERNAL INPUT BLOCKING
PARENTAL CONTROL / RATING
Enables you to select a source to block from the external
source devices you have hooked up.
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
After inputting the password, use the D or E button
to choose I n p u t B l o c k.
Press the G button and then use the F or G button
to select a source.
SETUP
VIDEO
AUDIO
Press the G button and then use the D or E button
to select O n or O f f on the each source.
TIME
Lock System
Set Password
Block Channel
Movie Rating
AV1
TV Rating-Children
AV2
TV Rating-General
Component
OPTION
SCREEN
LOCK
Aux. Block
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
RGB
On
On
Off
Off
HDMI1/DVI
On
HDMI2
Off
68
MOVIE & TV RATING
Movie Rating (MPAA) - for USA only
CC
MENU
RATIO
SAP
EXIT
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set
the ratings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that the
movie ratings limit only applies to movies shown on TV,
not TV programs, such as soap operas.
ENTER
TIMER
VOL
CH
PAGE
MUTE
SETUP
VIDEO
After inputting the password, use the D or E button
to choose M o v i e R a t i n g.
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Press the G button and then use the D or E button
to select G , P G, P G - 1 3, R , N C - 1 7 or X .
■
If you set PG-13 : G and PG movies will be available,
PG-13, R, NC-17 and X will be blocked.
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
PG
PG-13
NC-17
Blocking Off
PARENTAL CONTROL / RATING
G (General audience)
■ PG (Parental guidance suggested)
■ PG-13 (Parents strongly cautioned)
■ R (Restricted)
■ NC-17 (No one 17 and under admitted)
■ X (Adult only)
■ Blocking Off (Permits all programs)
Aux. Block
69
PARENTAL CONTROL /RATINGS
TV Rating Children - for USA only
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
SETUP
VIDEO
AUDIO
TIME
OPTION
After inputting the password, use the D or E button to
choose T V R a t i n g - C h i l d r e n.
Press the G button and then use the D or E button to
select A g e, or F a n t a s y V i o l e n c e.
Press the G button and then use the D or E button to
select block options.
SCREEN
Age(applies to TV-Y, TV-Y7)
■ Fantasy Violence(applies to TV-Y7)
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
SETUP
VIDEO
AUDIO
■
Lock System
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Age
Fantasy Violence
LOCK
Aux. Block
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
TV Rating General - for USA only
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
SETUP
VIDEO
PARENTAL CONTROL / RATING
After inputting the password, use the D or E button to
choose T V R a t i n g - G e n e r a l.
AUDIO
TIME
OPTION
SCREEN
Press the G button and then use the D or E button to
select A g e, D i a l o g u e, L a n g u a g e, S e x or V i o l e n c e.
Press the G button and then use the D or E button to
select block options.
Age(applies to TV-G,TV-PG,TV-14,TV-MA)
■ Dialogue-sexual dialogue (applies to TV-PG,TV-14)
■ Language-adult language (applies to TV-PG,TV-14,TV-MA)
■ Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)
■ Violence (applies to TV-PG,TV-14,TV-MA)
■
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Set Password
LOCK
LOCK
Lock System
Age
Dialogue
Language
Sex
Violence
70
TV Rating English - for CANADA only
Selecting canadian english language rating system.
After inputting the password, use the
choose T V R a t i n g - E n g l i s h.
or
Lock System
button to
Set Password
Block Channel
TV Rating-English
Press the G button and then use the D or E button to
select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f.
E (Exempt)
■ C (Children)
■ C8+ (Children eight years and older)
■ G (General programming, suitable for all audiences)
■ PG (Parental Guidance )
■ 14+ (Viewers 14 years and older)
■ 18+ (Adult programming)
■ Blocking Off (Permits all programs)
TV Rating-French
Input Block
■
Lock System
Blocking off : permits all
programs
Set Password
Block Channel
TV Rating-English
TV Rating-French
Input Block
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
C8+
PG
14+
18+
Blocking Off
TV Rating French - for CANADA only
Selecting canadian french language rating system.
Press the G button and then use the D or E button
to select E , G , 8 a n s +, 1 3 a n s +, 1 6 a n s +, 1 8 a n s +,
or B l o c k i n g o f f.
Lock System
Set Password
Block Channel
TV Rating-English
E(Exempt)
G(General)
■ 8ans+ (General-Not convenient for little children)
■ 13ans+ (Not convenient for children of 13 years
and younger)
■ 16ans+ (Not convenient for children of 16 years
and younger)
■ 18ans+ (This programs is only for adults)
■ Blocking off (Permits all programs)
TV Rating-French
Input Block
■
■
Lock System
Blocking off : permits all
programs
Set Password
Block Channel
TV Rating-English
TV Rating-French
Input Block
8 ans+
13 ans+
16 ans+
PARENTAL CONTROL / RATING
After inputting the password, use the D or E button
to choose T V R a t i n g - F r e n c h.
18 ans+
Blocking Off
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
71
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
■
The remote control
doesn’t work
Power is suddenly
turned off
Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ No broadcast on station tuned with Auto off activated.
■
The video function does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
Picture appears slowly
after switching on
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
APPENDIX
No or poor color
or poor picture
Horizontal/vertical bars
or picture shaking
■
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
72
■
■
Check antenna (Change the direction of the antenna).
The audio function does not work.
Press the VOL or VOLUME button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK & No sound
No output from one
of the speakers
Unusual sound from
inside
the product
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
■
APPENDIX
Screen color is unstable
or single color
■
■
73
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Please be sure not to use a wet cloth.
■
Extended Absence
CAUTION
APPENDIX
74
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
PRODUCT SPECIFICATIONS
32LC5DC
(32LC5DC-UA)
MODELS
Including stand
Dimensions
(Width x Height x Depth)
Excluding stand
37LC5DC
(37LC5DC-UA)
42LC5DC
(42LC5DC-UA)
31.8 x 23.9 x 9.8 inches
36.5 x 27.4 x 10.4 inches 40.7 x 29.6 x 11.6 inches
806.6 x 607.5 x 249.0mm
926.8 x 695.8 x 264.6 mm 1033.1 x 750.7 x 294.2 mm
31.8 x 21.7 x 3.9 inches
36.5 x24.8 x 4.2 inches 40.7 x 27.0x 4.3 inches
806.6 x 552.3 x 100.0 mm 926.8 x 629.8 x 107.4 mm 1033.1 x 686.5 x 110.2 mm
Weight
including stand
32.8 pounds / 14.9kg
47.2 pounds / 21.4 kg
61.3 pounds / 27.8 kg
excluding stand
26.9 pounds / 12.2 kg
36.8 pounds / 16.7 kg
47.2 pounds / 21.4 kg
AC100-240V ~ 50/60Hz
Power requirement
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
External Antenna Impedance
Operating Temperature
32 ~ 104°F (0 ~ 40°C)
Operating Humidity
Less than 80%
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Environment condition
Storage Humidity
■
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
75
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off and it responds properly the remote control
need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.
Press the M E N U and M U T E button continuously at the same time for two seconds; the currently selected
device button is illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,
you have to repeat from step 2.
Enter the appropriate code from the code table on the following pages. When pressing the button, the
light blinks at a time. If the device turned off, the programming is successful.
Press the M E N U button to store the code. After blinking twice, this code is stored.
Test the remote control functions to see if the device responds properly. If not, steps 2-5.
APPENDIX
Remote Control Code
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
76
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
006
015
006
008
018
016 025
VCR
Brand
AIWA
AKAI
Codes
Codes
Brand
MAGNAVOX
031 033 034 041
067 068
012 031 033 067
SAMSUNG
043 046 124
146
MARANTZ
069
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
APPENDIX
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
Brand
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
77
APPENDIX
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
9 ms
4.5 ms
■
Repeat code
0.55 ms
APPENDIX
9 ms
■
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
1.12 ms
■
2.24 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
78
Code
(Hexa)
Function
Note
0F
TV INPUT
Remote control Button
0B
INPUT
Remote control Button
08
POWER
Remote control Button (Power On/Off)
98
MULTI
Remote control Button
79
RATIO
Remote control Button
0E
TIMER
Remote control Button
10-19
Number Key 0-9
Remote control Button
4C
- (Dash)
Remote control Button
1A
FLASH BACK
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL -
Remote control Button
00
CH +
Remote control Button
01
CH -
Remote control Button
39
CC
Remote control Button
40
Remote control Button
41
Remote control Button
07
Remote control Button
06
Remote control Button
44
ENTER
Remote control Button
43
MENU
Remote control Button
52
EZ SOUND
Remote control Button
4D
EZ PIC
Remote control Button
5B
EXIT
Remote control Button
0A
SAP
Remote control Button
E1
Remote control Button
E0
Remote control Button
INFO
Remote control Button
60
PIP
Remote control Button
72
PIP CH -
Remote control Button
71
PIP CH +
Remote control Button
61
PIP INPUT
Remote control Button
63
SWAP
Remote control Button
D6
TV
Discrete IR Code
Function
5A
AV1
Note
Discrete IR Code
(AV1 Input Selection)
D0
AV2
Discrete IR Code
(AV2 Input Selection)
BF
COMPONENT
Discrete IR Code
(Component Input Selection)
D5
RGB-PC
CE
HDMI1/DVI
Discrete IR Code
(RGB-PC Input Selection)
Discrete IR Code
(HDMI1/DVI Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
76
Ratio 4:3
Discrete IR Code
(Only 4:3 Mode)
77
Ratio 16:9
AF
Ratio Zoom
Discrete IR Code
(Only 16:9 Mode)
Discrete IR Code
(Only Zoom1 Mode)
APPENDIX
AA
Code
(Hexa)
(TV Input Selection)
C4
POWER ON
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
(Only Power Off)
79


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2007:01:30 18:00:24+09:00
Create Date                     : 2007:01:30 17:05:28Z
Author                          : sun
Page Count                      : 81
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e2e876d8-cd75-44ac-a329-26c7b40e1348
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Creator Tool                    : 3.3: LaserWriter 8 8.7.1
Metadata Date                   : 2007:01:30 17:28:37+09:00
Document ID                     : uuid:2fd07b0a-3392-45b1-8d06-9c1b287c19c0
Format                          : application/pdf
Title                           : MFL34797007-Edit1
Creator                         : sun

EXIF Metadata provided by EXIF.tools