LG Electronics USA 42PX3DUE Plasma Display Panel User Manual 527Cen 1

LG Electronics USA Plasma Display Panel 527Cen 1

Contents

User Manual 2

CONNECTIONS & SETUP30CONNECTIONS & SETUPWhen connecting HDMI to DVI cableGGHDMI2 source does not support DVI source.GGIf the PC has a DVI output and no HDMI output, a separated audio connection is necessary.GGIf the PC does not support Auto DVI, you need to set the output resolution appropriately. To get thebest picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768,60Hz.NOTE!ANTENNAINCABLEINDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)ANTENNAINCABLECABLEINHDMI IN21(DVI)REMOTECONTROL INDVI-PC OUTPUT AUDIORGB (PC/DTV)AUDIO (RGB/DVI)RGB INRGB INRGB INAUDIO (RGB/DVI)AUDIO (RGB/DVI)RGB (PC/DTV)Connect the DVI output of the PC to the HHDDMMII IINN 11((DDVVII)) jack on the set.Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII))jack on the set.1. How to connect■Turn on the PC and the set■Select HHDDMMII11//DDVVIIinput source with using the IINNPPUUTTbutton on the remote control.2. How to use211 2527Cen-1 80/1/2 4:15 PM Page 30
CONNECTIONS & SETUP31GGTo get the the best picture quality, adjust the PCgraphics card to 1024x768, 60Hz.GGDepending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.GGWhen Source Devices are connected withHDMI/DVI Input, the output PC Resolution (VGA,SVGA, XGA), Position and Size may not fit on theScreen. As shown in the picture, press theADJUST button to adjust the screen Position ofthe TV SET and contact a PC graphics card ser-vice center.GGWhen Source Devices connected with HDMI/DVIInput, output TV SET Resolution (480p, 720p,1080i) and TV SET Display fit EIA/CEA-861-BSpecification to Screen. If not, refer to the Manualof HDMI/DVI Source Devices or contact your ser-vice center.GGIf the HDMI/DVI Source Device is not connectedto the Cable or if there is a poor cable connec-tion, "No signal" is displayed in the HDMI/DVIInput. In this case, that Video Resolution is notsupported. If "Invalid Format" is displayed, refer tothe Source Device manual or contact your servicecenter.GGAvoid keeping a fixed image on the screen for along period of time. The fixed image may becomepermanently imprinted on the screen.GGThe synchronization input form for Horizontaland Vertical frequencies is separate.NOTES!Supported Display Specifications (RGB/HDMI-PC)Horizontal Vertical Frequency(KHz)Frequency(Hz)31.468 70.0931.469 70.0831.469 59.9437.861 72.8037.500 75.0035.156 56.2537.879 60.3148.077 72.1846.875 75.0048.363 60.0056.476 70.0660.023 75.0247.776 59.87047.720 59.799Resolution 720x4001360x768640x350* RGB-PC mode only: 640x350, 720X400* HDMI-PC mode only: 1280x768640x480800x6001024x768Supported Display Specifications (RGB/HDMI-DTV)Horizontal Vertical Frequency(KHz)Frequency(Hz)31.47 6031.47 59.9445.00 60.0044.96 59.9433.75 60.0033.72 59.94Resolution 720x4801280x7201920x10801280x768527Cen-1 80/1/2 4:15 PM Page 31
CONNECTIONS & SETUP32CONNECTIONS & SETUPScreen Setup for PC modeOverviewWhen RGB connect to PC output and select the RGB-PC in MainInput, this function is used.When HDMI IN 1 (DVI) connect to PC output and select HDMI1/DVIinput, this function is used.In RGB-DTV mode, SIZE and PHASE is not available.Adjustment for screen Position, Size, Phase, ResetPress the AADDJJUUSSTTbutton and then use DDor EEbutton toselect PPoossiittiioonn, SSiizzee, or PPhhaassee.Press the EENNTTEERRbutton and then use DDEE FFGG button tomake appropriate adjustments.■The PPhhaasseeadjustment range is --1166 ~++1166.■The SSiizzeeadjustment range is --3300 ~++3300.Press the EENNTTEERRbutton.
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE58APMTIMERADJUSTSWAPPIP CH +PIP CH +PIP CH -PIP CH -PIPPIPPIP INPUTPIP INPUTEZ SOUNDEZ PICWatching PIP/POP/Twin PicturePress the PPIIPPbutton to access the sub picture. Each press of PIP changes the PIP options as shown below.PIP Mode POP ModeTwin Picture ModePIP lets you view 2 different inputs (sources) on your TV screenat the same time. One source will be large, and the othersource will show a smaller inset image.Twin Picture mode splits the screen into two images, allowingtwo picture sources to be shown on the TV screen at the sametime. Each source is given half the screen.PIP OffTV 2-0 TV 4-0 TV 6-0 SPECIAL FUNCTIONS PIP / POP / Twin Picture527Cen-2 80/1/2 4:29 PM Page 58
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE59Selecting an Input Signal Source for PIP/Twin Picture Use the PPIIPP IINNPPUUTTbutton to select the input source for the sub picture. Each press of PPIIPP IINNPPUUTTbuttonchanges the PIP source. You can also select sources for the SSuubb IInnppuuttin the SSEETTUUPPmenu.Main Picture Source Available Sub Picture SourcesDTV/CADTV Analog (TV/CATV), AV1, and AV2TV/CATV, AV1, AV2, Component1,Component2, RGB-PC/RGB-DTV, DTV/CADTV, Analog(TV/CATV), AV1, and AV2HDMI1/DVI, HDMI2TV Program Selection for PIPMoving the PIP Sub PicturePress the PPIIPPbutton.Select the AAnntteennnnaaor CCaabblleeoption on the Sub input menu or with the PPIIPPIINNPPUUTTbutton. Use the PPIIPP CCHH++/ PPIIPP CCHH--button to select a channel forthe sub picture.(You can’t select DTV for main and sub picture simultaneously).In PIP mode, press the DDEE FFGG button to move the subpicture to a different location on the screen.112527Cen-2 80/1/2 4:29 PM Page 59
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE60Swapping the PIP/Twin PictureSPECIAL FUNCTIONS PIP / POP / Twin PictureRepeatedly, use the SSWWAAPPbutton to switch the main and sub pictures.■Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI1/DVI, HDMI2 input sources for the mainpicture can’t be used to swap the main and sub pictures.Main Picture Sub PictureAdjusting Main and Sub Picture Sizes for Twin PictureUse the DDEE FFGG button to change main and sub picturesizes in Twin Picture mode.■If screen is adjusted to the maximum size, the large screenis filled with entire screen vertically as shown.Main Picture Sub PictureSWAPSWAPPIPTwinPicture11527Cen-2 80/1/2 4:29 PM Page 60
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE61POP (Picture-out-of-Picture : Channel Scan) Press the PPIIPPbutton to activate the PPOOPP mmooddeewhile in PPIIPPmmooddee..■CChhaannnneell sseelleeccttiioonn: Use FFbutton to enlarge theselected channel being searched on the PIP screen toshift it for viewing on the Main screen. ■PPIIPP sseelleeccttiioonn: Use DD or EE button to select one of 3PIP screen pictures in PPOOPPmode.■When watching TV/CATV, TV/DTV or CATV/CADTV Subpictures are scanned. However, when watchingDTV/CADTV, only TV/CATV Sub pictures are scanned.Press the EEXXIITTbutton to cancel POP mode.Use POP to search the programs of all the memorized channelsone-by-one on the 3 PIP screen display, (while the main picturesource remains the current channel). The pictures of all theprogrammed channels are searched with the 3 POP screens.NOTE!GGRun EZ Scan channel search before using POP mode.GGWhen Sub pictures are changed from the TV/DTV toCATV/CADTV in POP mode, you may hear a noise from theTuner switch.TV 2-0 TV 4-0 TV 6-0 12527Cen-2 80/1/2 4:29 PM Page 61
TV MENU62ON SCREEN MENUS SELECTION AND ADJUSTMENTTV MENUPress the MMEENNUUbutton and then use DD or EE button to select the each menu.Press the GG button and then use DDEE FFGG button to display the available menus.Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.SETUP VIDEOCABLEOPTIONLOCKTIMEEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDEZ PictureColor TemperatureXDAdvancedVideo ResetAuto ClockManual ClockOff TimerOn TimerSleep TimerAuto OffAspect RatioCaption/TextCaption OptionLanguageISM MethodLow PowerAUDIOAudio LanguageEZ SoundRiteEZ SoundBalanceTV SpeakerBBELock SystemSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockSA CableCARD CP Screen GSA CableCARD Diag ScreenSA CableCARD Host ID Screen21In case of Scientific Atlanta CableCARD™Lock SystemSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockFor USA For Canada527Cen-2 80/1/2 4:29 PM Page 62
TV MENU / SETUP(CHANNEL)63AUTO CHANNEL SEARCH (EZ SCAN)TV MENUINFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITPress the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect EEZZ SSccaann.Press the EENNTTEERRbutton to begin the channel search.Allow EEZZ SSccaannto complete the channel search cyclefor AANNTTEENNNNAAand CCAABBLLEE.Automatically finds all channels available through antennaor cable inputs, and stores them in memory on the channellist. Run EZ Scan again after any Antenna/Cable connectionchanges. A password is required to gain access to EZ Scan menu ifthe Lock System is turned on.EZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDSelection ( Gor ) leads you to the EZ scan screen.EZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDEZ Scan GManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDSelection ( Gor ) leads you to the EZ scan screen.231Processing EZ scan...ANTENNA Ch.2011 channel(s) foundPress to stop thecurrent scan and startCABLE channel scan.MENU PreviousNextNOTE!Analog TV signal Digital DTV signalAnalog CATV signal Digital CADTV signal123SETUP(Channel)527Cen-2 80/1/2 4:29 PM Page 63
TV MENU / SETUP(CHANNEL)64MANUAL CHANNEL SEARCH (MANUAL SCAN)TV MENU SETUP(Channel)A password is required to gain access to Manual Scanmenu if the Lock System is turned on.While using the CableCARDTM, CATV, CADTV is not work-ing in Manual Scan.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect MMaannuuaall SSccaann.Press the GG button and then use DD or EE button toselect TTVV, DDTTVV, CCAATTVV, and CCAADDTTVV.Press the GG button and then use DD or EE button toselect channel you want to add or delete.Press the EENNTTEERRbutton to add or delete the channel.Press the EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITNOTE!GGThis digital channel number is a physical channelnumber, which is different from the normal channelnumber shown in Channel Edit.EZ ScanManual Scan GChannel EditDTV SignalMain InputSub InputInput LabelSet IDSelect channel type and RF-channel number.TV 2EZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet ID214365Select channel type and RF-channel number.TV GG2Press to delete thechannelTV 2-0DDEE123 4 5527Cen-2 80/1/2 4:29 PM Page 64
TV MENU / SETUP(CHANNEL)65CHANNEL EDITFrom the default channel list created from the EZ Scan channelsearch, you can create two different types of channel lists inmemory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or offwith EENNTTEERRbutton. The channels in the Custom List are dis-played in black and the channels deleted from the Custom Listare displayed in gray. Once a channel is highlighted you can addor delete the channel by referring to the small window at thetop-left corner of the screen.You can create your own Favorite List. Use the FFAAVVbutton onthe remote control when a channel is highlighted and then addor delete the channel to/from your Favorite List.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect CChhaannnneell EEddiitt.Press the GG button. You will now see a screen filledwith channel numbers and a preview picture. Use DDEE FFGG button to select a channel and thenuse the EENNTTEERRbutton to add or delete it. Press FFAAVVbutton to add the channel to the Favorite List.The surfing icon mark will appear in front of thatchannel number.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.VOL CHMUTEFAVPAG EPAG EINFO iTV GUIDEENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ ScanManual ScanChannel Edit GDTV SignalMain InputSub InputInput LabelSet IDSelection ( Gor ) leads you to the channel editscreen.EZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet ID21435123 4527Cen-2 80/1/2 4:29 PM Page 65
TV MENU / SETUP(CHANNEL)66DTV SIGNAL STRENGTHTV MENU SETUP(Channel)This feature displays the DTV signal levels being receivedand indicates whether you need to adjust your antenna ordigital cable input. The higher the signal strength, the lesslikely you are to experience picture degradation.DTV Signal: This function is only available when the inputsignal is DTV or CADTV.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect DDTTVV SSiiggnnaall..View the on-screen signal strength monitor to seethe quality of the signal being received.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet IDBad Normal GoodEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet ID234112 3527Cen-2 80/1/2 4:29 PM Page 66
TV MENU / SETUP(CHANNEL)67MAIN PICTURE SOURCE SELECTIONChanges the picture source so you can watch your off-airTV, cable TV, VCR, DVD, or any other devices that are con-nected to your TV. Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect MMaaiinn IInnppuutt..Press the GG button and then use DD or EE button toselect the source: AAnntteennnnaa, CCaabbllee, AAVV11, AAVV22,CCoommppoonneenntt11, CCoommppoonneenntt22, RRGGBB--PPCC(or RRGGBB--DDTTVV), HHDDMMII11//DDVVII, or HHDDMMII22.■ To toggle RGB-DTV and RGB-PC, select RGB-PC (orRGB-DTV) and press the GG button.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Select sources for the SSuubb IInnppuuttin theSSEETTUUPPmenu.See Page 59 for selecting the inputsource for the sub picture by pressing thePPIIPP IINNPPUUTTbutton. Sub Picture Source SelectionINFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ ScanManual ScanChannel EditDTV SignalMain Input GSub InputInput LabelSet IDAntennaCableAV1AV2Component1Component2RGB-PCHDMI1/DVIHDMI2EZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet ID234112 3527Cen-2 80/1/2 4:29 PM Page 67
TV MENU / SETUP(CHANNEL)68INPUT LABELTV MENU SETUP(Channel)Sets a label to each input source which is not in use whenyou press the INPUT button. Press the MMEENNUUbutton and then use DD or EE but-ton to select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect IInnppuutt LLaabbeell.Press the GG button and then use DD or EE button toselect the source: AAVV11, AAVV22,CCoommppoonneenntt11,CCoommppoonneenntt22, RRGGBB, HHDDMMII11//DDVVIIor HHDDMMII22.Press the FF or GG button to select the label.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput Label GSet IDAV1 Cable BoxAV2 VCRComponent1 DVDComponent2 Set Top BoxRGB PCHDMI1/DVI GameHDMI2 SatelliteEZ ScanManual ScanChannel EditDTV SignalMain InputSub InputInput LabelSet ID2345113 42527Cen-2 80/1/2 4:29 PM Page 68
TV MENU / VIDEO ADJUSTMENT69AUTO PICTURE CONTROL (EZ PICTURE)Press the EEZZ PPIICCbutton repeatedly to select the pictureappearance setup option as below :DDaayylliigghhtt, NNoorrmmaall, NNiigghhtt TTiimmee, UUsseerr11, and UUsseerr22(your own settings).Press the EEXXIITTbutton to save and return to TV viewing.■You can also use the VVIIDDEEOOmenu to adjust EEZZ PPiiccttuurree.APMTIMERADJUSTSWAPPIP CH +PIP CH -PIPPIP INPUT1 2 3 456 7809 FLASHBKEZ SOUNDEZ PICEZ PICEZ Picture adjusts the TV for the best picture appearance.Select the preset value in the EZ Picture menu based on theprogram category.DDaayylliigghhtt,NNoorrmmaall,NNiigghhtt TTiimmeeSettings are preset for optimumpicture quality at the factory and are not adjustable.In the UUsseerr11, and UUsseerr22modes only, user can directly adjustthe contrast, brightness, color, sharpness, tint.TV MENU VIDEO ADJUSTMENT21EZ Picture GColor TemperatureXDAdvancedVideo ResetDaylightNormalNight TimeUser 1User 2EZ PictureColor TemperatureXDAdvancedVideo Reset527Cen-2 80/1/2 4:29 PM Page 69
TV MENU / VIDEO ADJUSTMENT70ADAPTIVE PICTURE MODE (APM)TV MENU VIDEO ADJUSTMENTPress the AAPPMMbutton at once. As shown below, the screenis divided to 4-split.Use the DDEE FFGG button to navigate 4 EZ Pictures. By pressing the EENNTTEERRbutton, you can select the desiredmode.Press the AAPPMMbutton twice. The 4-same screens are dis-played. You can easily compare with 4 modes. Use the DDEE FFGG button to navigate 4 EZ Pictures. By pressing the EENNTTEERRbutton, you can select the desiredmode.Allows you to select your preferred picture mode aftercomparing the four different picture (Daylight, Normal,Night Time, User1 (or User2)) settings.APMAPMTIMERADJUSTSWAPPIP CH +PIP CH -PIPPIP INPUT1 2 3 4 5 6 7809 FLASHBKEZ SOUNDEZ PICDDaayylliigghhttNormalUser1Night TimeEXITNavigate Select ExitDDaayylliigghhttNormalUser1Night TimeEXITNavigate Select ExitNOTE!GGWhile operating the 4-split, any button except AAPPMM,EENNTTEERR, EEXXIITT, DDEE FFGG, VVOOLLUUMMEEDD or EE, MMUUTTEEbuttonon the remote control are not usable. GGAPM screen will automatically disappear after approx. 40seconds unless a button is pressed.23411 23 4527Cen-2 80/1/2 4:29 PM Page 70
TV MENU / VIDEO ADJUSTMENT71MANUAL PICTURE CONTROL (EZ Picture-UUsseerroption)Press the MMEENNUUbutton and then use DD or EE buttonto select the VVIIDDEEOOmenu.Press the GG button and then use DD or EE button toselect EEZZ PPiiccttuurree.Press the GG button and then use DD or EE button toselect UUsseerr 11or UUsseerr 22.Press the GG button and then use DD or EE button toselect the desired picture option ((CCoonnttrraasstt,BBrriigghhttnneessss,CCoolloorr,SShhaarrppnneessss, or TTiinntt)).Press the GG button and then use FFor GGbutton tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITAdjust the picture appearance to suit your preference andviewing situations.EZ PictureColor TemperatureXDAdvancedVideo ResetDaylightNormalNight TimeUser 1 GUser 2Selection ( Gor ) leads youto the detailed setting screen.Contrast 85 FF GEEUser1Contrast 85 GBrightness 50Color 50Sharpness 50Tint 0 R GPress to confirm.MENUEZ PictureColor TemperatureXDAdvancedVideo Reset23456112 345527Cen-2 80/1/2 4:29 PM Page 71
TV MENU / VIDEO ADJUSTMENT72COLOR TEMPERATURE CONTROL TV MENU VIDEO ADJUSTMENTAuto Color Temperature ControlChoose one of three automatic color adjustments. Set towarm to enhance hotter colors such as red, or set to coolto see less intense colors with more blue.Press the MMEENNUUbutton and then use DD or EE buttonto select the VVIIDDEEOOmenu.Press the GG button and then use DD or EE button toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button toselect either CCooooll,MMeeddiiuumm, WWaarrmm or UUsseerr.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ PictureColor Temperature GXDAdvancedVideo ResetCoolMediumWarmUserEZ PictureColor TemperatureXDAdvancedVideo Reset234112 3527Cen-2 80/1/2 4:29 PM Page 72
TV MENU / VIDEO ADJUSTMENT73Manual Color Temperature ControlYou can also adjust the detailed settings(Red, Green, Blue)by selecting the UUsseerrmenu.Press the MMEENNUUbutton and then use DD or EE buttonto select the VVIIDDEEOOmenu.Press the GG button and then use DD or EE button toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button toselect UUsseerr.Press the GG button and then use DD or EE button toselect RReedd, GGrreeeenn, or BBlluuee.Press the GG button and then use FF or GG button tomake appropriate adjustments.■The adjustment range of RRGGBB, GGrreeeenn, or BBlluueeis-20~+20.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITEZ PictureColor TemperatureXDAdvancedVideo ResetEZ PictureColor TemperatureXDAdvancedVideo Reset234561UserRed 0 GGreen 0Blue 0Press to confirm.MENUSelection ( Gor ) leads youto the detailed setting screen.CoolMediumWarmUser GRed 0 FFGEE2 3145527Cen-2 80/1/2 4:29 PM Page 73
TV MENU / VIDEO ADJUSTMENT74TV MENU VIDEO ADJUSTMENTXDPress the MMEENNUUbutton and then use DD or EE buttonto select the VVIIDDEEOOmenu.Press the GG button and then use DD or EE button toselect XXDD.Press the GG button and then use DD or EE button toselect AAuuttoo or MMaannuuaall.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.INFO iTV GUIDEENTERENTERSAPCCRATIOPOWERDAY -DAY+VCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTMENUMENUEXITXD is LG Electronic’s unique picture improving technologyto display a real HD source through an advanced digitalsignal processing algorithm.When selecting EZ Picture options (Daylight, Normal andNight time), XD is automatically changed to Auto.When selecting EZ Picture options (User 1 and User 2),you can choose the Auto / Manual.When selecting the Manual, you can adjust the XDContrast, XD color and XD Noise.EZ PictureColor Temperature XD GAdvancedVideo ResetManualXD Contrast OnXD Color OnXD Noise OnEZ PictureColor TemperatureXDAdvancedVideo Reset2341SSeelleeccttiinngg tthhee MMaannuuaall1. Press the GG button and then use FF or GG but-ton to select XXDD CCoonnttrraasstt, XXDD CCoolloorrorXXDD NNooiissee.■XXDD CCoonnttrraasstt:: Optimizing the contrastautomatically according to the brightness ofthe reflection. ■XXDD CCoolloorr::Adjusting the colors of thereflection automatically to reproduce asclosely as possible to the natural colors. ■XXDD NNooiissee :: Removing the noise up to thepoint where it does not damage the originalpicture.2. Use the DD or EE button to select OOnnor OOffff.2 31527Cen-2 80/1/2 4:29 PM Page 74

Navigation menu