LG Electronics USA 47LM6200UE LED LCD TV Monitor User Manual MFL67468101 en indd

LG Electronics USA LED LCD TV Monitor MFL67468101 en indd

User manual

www.lg.comOWNER’S MANUALLED LCD TVPlease read this manual carefully before operating your set and retain it for future reference.32LS570042LS570047LS570055LS5700P/NO : MFL67468101 (1111-REV00)32LS575042LS575047LS575055LS575042LM620047LM620055LM620065LM620042LM625047LM625055LM625042LM670047LM670055LM670047LM760055LM7600
2ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSAlways comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING/CAUTIONRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.y Do not use this apparatus near water.y Clean only with a dry cloth.y Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.y Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.y Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
3ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSy Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.y Only use attachments/accessories specified by the manufacturer.y Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.y Unplug this apparatus during lightning storms or when unused for long periods of time.y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.y Never touch this apparatus or antenna during a thunder or lightning storm.y When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.y Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.y CAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.y Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
4ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSy Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).y GroundingEnsure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.Short-circuit BreakerPower Supplyy DISCONNECTING DEVICE FROM THE MAIN POWER The power outlet must remain readily accessed in the event the device needs to be unplugged.y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.y Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.y ANTENNAS Outdoor antenna grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70NEC: National Electrical CodeGround ClampAntenna Lead in WireAntenna Discharge Unit(NEC Section 810-20)Grounding Conductor(NEC Section 810-21)Power Service GroundingElectrode System (NEC Art 250, Part H)Electric Service EquipmentGround Clampy Cleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.y Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.y Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.y If you smell smoke or other odours coming from the TV, unplug the power cord contact an authorized service center.y Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.y Keep the product away from direct sunlight.
5ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSy Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.y Generated Sound“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.y Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.y Viewing 3D Imaging (For 3D TV)- The vision of young children may still be developing. 3D contents should not be viewed by children under the age of 5. All other children’s viewing of 3D content should be supervised by a responsible adult.- Some viewers may experience symptoms of discomfort such as nausea, eye strain, fatigue and dizziness when viewing 3D content. All viewers should take regular breaks to help avoid these symptoms. If you experience any symptoms of discomfort, discontinue viewing and take a break until the symptoms go away. If symptoms continue, consult a doctor.- Following the guideline below may lessen the likelihood of experiencing such discomfort: · Viewing angle: watch 3D contents at the eye level of the center of the TV screen. · Viewing distance: watch 3D contents from the minimum distance of 2 times the diagonal size of the TV screen.y If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.DISPOSAL (Hg lamp only used in LCD TVs)The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.Preventing “Image burn” or “Burn-in” on your TV screeny If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.y Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.For USA and CanadaNOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.FTstpinsteḫOI
6ENGENGLISHTABLE OF CONTENTSTABLE OF CONTENTS2 IMPORTANT SAFETY INSTRUCTIONS6 TABLE OF CONTENTS7 INSTALLATION PROCEDURE7 ASSEMBLING AND PREPARING7 Unpacking9 Optional Extras10 Parts and buttons11 Lifting and moving the TV12 Setting up the TV12 - Attaching the stand 13 - Mounting on a table14 - Mounting on a wall15 - Tidying cables16 MAKING CONNECTIONS16 Connecting to an antenna or cable17 Connecting to a HD receiver, DVD, or VCR player17 - HDMI Connection18 - DVI to HDMI Connection19 - Component Connection20 - Composite Connection21 Connecting to a PC21 - HDMI Connection, DVI to HDMI Connec-tion or RGB Connection23 Connecting to an Audio System23 - Digital Optical Audio Connection24 Connecting to a USB25 REMOTE CONTROL25 Magic Remote Control Functions26 - Registering Magic Remote Control26 - How to use Magic Remote Control 26 - Precautions to Take when Using the Magic Remote Control27 WATCHING TV27 Turning the TV on for the first time27 USING THE USER GUIDE28 ENTERTAINMENT28 Network Connection28 - Connecting to a wired network30 - Connecting to a wireless network31 TROUBLESHOOTING31 OPEN SOURCE SOFTWARE NOTICE32 SPECIFICATIONS35 MAINTENANCE35 Cleaning Your TV35 - Screen and frame35 - Cabinet and stand35 - Power cord NOTEy Image shown may differ from your TV.y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.y The available menus and options may differ from the input source or product model that you are using.y New features may be added to this TV in the future.
7ENGENGLISHASSEMBLING AND PREPARINGASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.INSTALLATION PROCEDURE1 Open the package and make sure all the accessories are included.2 Attach the stand to the TV set.3 Connect an external device to the TV set.4 Make sure the network connection is available. You can use the TV functions only when the network connection is made. NOTEy The items supplied with your product may vary depending on the model.y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.y Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.BAAB*A 10 mm (0.39 inches)*B 18 mm (0.7 inches) CAUTIONy Do not use any unapproved items to ensure the safety and product life span.y Any damages or injuries by using unapproved items are not covered by the warranty.y In case of some model, the thin film on screen is a part of TV, So don’t take it off.
8ENGENGLISHASSEMBLING AND PREPARINGMagic Remote Control, Batteries (AA)(See p.25)Owner’s manual Cable holder(See p.15)Screws for assembly8 EA, M4 x 20(See p.12)Screw for fixing(Except 55LM6700)(See p.13)Ring spacers4 EA(See p.15)Power Cord Composite gender cable(See p.19, 20)Component gender cable(See p.19)Cinema 3D Glasses(Except LS5700, LS5750 series)The number of 3D glasses may differ depending on the model or country.Polishing cloth(Depending on model)Gently wipe the spots on the cabinet with the polishing cloth.
9ENGENGLISHASSEMBLING AND PREPARINGAG-F2**Cinema 3D GlassesThe model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.AN-WF100Wi-Fi dongleAN-MR300Magic Remote ControlOptional ExtrasOptional extras can be changed or modified for quality improvement without any notification.Contact your dealer for buying these items.These device only works with compatible LG TV.Compatibility LS5700LS5750LM6200LM6250 LM6700 LM7600AG-F2** Cinema 3D Glasses AN-WF100 Wi-Fi Dongle AN-MR300 Magic Remote Control 
10ENGENGLISHASSEMBLING AND PREPARINGParts and buttonsSETTINGSINPUTOKSpeakersScreen1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.Touch buttons2Power indicatorRemote control and intelligent1 sensorsTouch Button Descriptionv ^Scrolls through the saved channels.- + Adjusts the volume level.OK ٜSelects the highlighted menu option or confirms an input.SETTINGS Accesses the main menu, or saves your input and exits the menus.INPUT Changes the input source. / ITurns the power on or off. NOTEy You can set the power indicator light to on or off by selecting OPTION in the main menus.
11ENGENGLISHASSEMBLING AND PREPARINGLifting and moving the TVWhen moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTIONy Avoid touching the screen at all times, as this may result in damage to the screen. y It is recommended to move the TV in the box or packing material that the TV originally came in.y Before moving or lifting the TV, disconnect the power cord and all cables.y When holding the TV, the screen should face away from you to avoid damage.y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.y When transporting a large TV, there should be at least 2 people.y When transporting the TV by hand, hold the TV as shown in the following illustration. y When transporting the TV, do not expose the TV to jolts or excessive vibration.y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
12ENGENGLISHASSEMBLING AND PREPARINGSetting up the TVPut your TV on a pedestal stand and mount the TV on a table or wall.Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTIONy Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.132 CAUTIONy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. NOTEy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.M4 x 204 EAFrontM4 x 204 EATop View
13ENGENGLISHASSEMBLING AND PREPARINGMounting on a table1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.10 cm10 cm10 cm10 cm(4 inches)2 Connect the power cord to a wall outlet. CAUTIONy Do not place the TV near or on sources of heat, as this may result in fire or other damage. NOTEy Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.y When adjusting the angle of the TV, watch out for your fingers.2020 Securing the TV to a table(Except 55LM6700)Fix the TV to a table to prevent from tilting forward, damage, and potential injury.Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. WARNINGy To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
14ENGENGLISHASSEMBLING AND PREPARINGSecuring the TV to a wall (optional)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.- If there are bolts inserted at the eye-bolts position, remove the bolts first.2 Mount the wall brackets with the bolts to the wall.Match the location of the wall bracket and the eye-bolts on the rear of the TV.3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.Make sure to keep the rope horizontal with the flat surface. CAUTIONy Make sure that children do not climb on or hang on the TV. NOTEy Use a platform or cabinet that is strong and large enough to support the TV securely.y Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.Mounting on a wallAttach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.LG recommends that wall mounting be performed by a qualified professional installer.10 cm10 cm10 cm10 cm(4 inches)Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.Model 32LS570042LS570032LS575042LS575042LM620042LM625042LM670047LS570055LS570047LS575055LS575047LM620055LM620065LM620047LM625055LM625047LM670055LM670047LM760055LM7600VESA 200 x 200 400 x 400Standard screw M6 M6Number of screws 44Wall mount bracket (optional)LSW200BX, LSW200BXGLSW400BX, LSW400BXG
15ENGENGLISHASSEMBLING AND PREPARING CAUTIONy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTEy Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit includes an installation manual and necessary parts.y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.y The length of screws may differ depending on the wall mount. Make sure to use the proper length.y For more information, refer to the manual supplied with the wall mount. NOTEy Place the ring spacers on the set before installing the wall mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly.Ring spacersTidying cables1 Gather and bind the cables with the cable holder.Cable holder CAUTIONy Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.
16ENGENGLISHMAKING CONNECTIONSConnecting to an antenna or cableConnect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. NOTEy Use a signal splitter to use more than 2 TVs.y Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna. CAUTIONy Make sure not to bend the copper wire of the RF cable.Copper wirey Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.ANTENNA / CABLEVHF AntennaUHF AntennaAntennaTerminalCoaxial (75Ω)MAKING CONNECTIONSConnect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTEy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device.y The external device connection may differ from the model.y Connect external devices to the TV regardless of the order of the TV port.y If you connect a gaming device to the TV, use the cable supplied with the gaming device.y Refer to the external equipment’s manual for operating instructions.
17ENGENGLISHMAKING CONNECTIONSQConnecting to a HD receiver, DVD, or VCR playerConnect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.HDMI ConnectionHDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTEy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.ARC (Audio Return Channel)y Dq#h{whuqdo#dxglr#ghylfh#wkdw#vxssruwv#VLPSOLQN#dqg#DUF#pxvw#eh#frqqhfwhg#xvlqj#KGPL#lqsxw#4#+DUF,#sruw1y Zkhq#frqqhfwhg#zlwk#d#kljk0vshhg#KGPL#fdeoh/#wkh#h{whuqdo#dxglr#ghylfh#wkdw#vxssruwv#DUF#rxwsxwv#rswlfdo#VSGLI#zlwkrxw#dgglwlrqdo#rswlfdo#dxglr#fdeoh#dqg#vxssruwv#wkh#VLPSOLQN#ixqfwlrq1HDMI 2 3 1 (ARC) 4 (PC) INDVD/ Blu-Ray / HD Cable Box / HD STBChoose any HDMI input port to connect. It does not matter which port you use.(*Not Provided) NOTEy DTV Audio Supported Codec: MPEG, Dolby Digitaly HDMI Audio Supporeted Format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/192k) -> Not supported DTS.
18ENGENGLISHMAKING CONNECTIONSAUDIO OUTDVI OUT4 (PC) IN(RGB/HDMI-PC)AUDIO(RGB/HDMI-PC)AUDIODVI to HDMI ConnectionTransmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.(*Not Provided)(*Not Provided)DVD/ Blu-Ray / HD Cable Box
19ENGENGLISHMAKING CONNECTIONSVIDEOAUDIOLRINCOMPONENTAVPRPBYAUDIOVIDEOComponent ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTEy If cables are installed incorrectly, it could case the image to display in black and white or with distorted color. y Check to ensure the cable are matched with the corresponding color connection.DVD/ Blu-Ray / HD Cable Box(*Not Provided)(*Not Provided)(Use the composite gender cable provided.) (Use the component gender cable provided.)GREENREDBLUEGREENREDBLUEGREENREDBLUEWHITEREDYELLOWWHITEREDWHITERED
20ENGENGLISHMAKING CONNECTIONSComposite ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTEy If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.y Check to ensure the cable are matched with the corresponding color connection.VIDEOMONO( )AUDIOLRINCOMPONENTAVPRPBYAUDIOVIDEOVCR / DVD/ Blu-Ray / HD Cable Box(*Not Provided)YELLOWWHITEREDYELLOWWHITEREDYELLOWWHITERED(Use the composite gender cable provided.)
21ENGENGLISHMAKING CONNECTIONSHDMI 2 3 1 (ARC) 4 (PC) INConnecting to a PC NOTEy It is recommended to use the TV with the HDMI connection for the best image quality.y Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.y The synchronization input form for Horizontal and Vertical frequencies is separate.y Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.HDMI Connection, DVI to HDMI Connection or RGB ConnectionChoose method A, B, or C to make connection.Method A: HDMI Connection(*Not Provided)SFChoose any HDMI input port to connect. It does not matter which port you use.
22ENGENGLISHMAKING CONNECTIONSMethod B: DVI to HDMI ConnectionMethod C: RGB ConnectionRGB OUT (PC) AUDIO OUT(PC)RGB(RGB/HDMI-PC)AUDIO(PC)RGB(RGB/HDMI-PC)AUDIO(*Not Provided)(*Not Provided)SFAUDIO OUT DVI OUT4 (PC) IN(RGB/HDMI-PC)AUDIO(RGB/HDMI-PC)AUDIO(*Not Provided)SF(*Not Provided)
23ENGENGLISHMAKING CONNECTIONSConnecting to an Audio SystemUse an optional external audio system instead of the built-in speaker. NOTEy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off.Digital Optical Audio ConnectionTransmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTEy Do not look into the optical output port. Looking at the laser beam may damage your vision.y Audio with ACP (Audio Copy Protection) function may block digital audio output.Digital Audio System(*Not Provided)OPTICAL AUDIO INOUTOPTICALDIGITALAUDIO
24ENGENGLISHMAKING CONNECTIONSConnecting to a USBConnect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTEy To store apps in the USB storage device, make sure that it is connected to the USB IN 3 USB Apps port.y To use USB Hub device, make sure that it is connected to the USB IN 2 USB Hub port.USB Hub USB Apps HDD IN123USB INUSB(*Not Provided)Choose any USB input port to connect. It does not matter which port you use.
25ENGENGLISHREMOTE CONTROLREMOTE CONTROLMagic Remote Control FunctionsPlease read this manual carefully and use the TV correctly.When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.To remove the batteries, perform the installation actions in reverse.y Do not mix old and new batteries, as this may damage the remote control. CAUTIONMake sure to point the remote control at the remote control sensor on the TV.HOMEBACKVOL CHMY APPS (POWER)Turns the TV on or off.Pointer (RF & Bluetooth transmitter)Blinks the light when operating.HomeAccesses the Home menu.Navigation buttons (up/down/left/right) Scrolls through menus or options.BACKReturns to the previous level.+ VOL -Adjusts the volume level.^ CH vScrolls through the saved channels.(MUTE)Mutes all sounds.MY APPSSees MY APPS.(User Guide)Sees User Guide. (Wheel)Selects menus or options and confirms your input.If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control.To display the pointer again, shake the Magic remote control from side to side.1If you press (Wheel) on the Magic remote control, the following screen appears.Views the information of the current program and screen.2If you press (Wheel) on the Magic remote control, the following screen appears.Set the channel you want.You can press the CH button on the remote control to set the channel.3If you move the Magic remote control on the bottom of the screen. You can selcet Quick Menu. %ULHI,QIR7LWOH7HVW ,QIR᱈$079 L123
26ENGENGLISHREMOTE CONTROLRegistering Magic Remote ControlThe Magic Remote Control operates by pairing with your TV.Register the Magic Remote Control to use it.How to register the Magic Remote ControlTo register the remote control, press the (Wheel) button on the remote control while aiming it at your TV.How to Re-register the Magic Remote Control after Registration FailureBACKHOMEReset the remote control by pressing and holding both the BACK and HOME buttons for 5 seconds. (Once the reset is complete, the light on the Pointer blinks.) Then repeat the above procedure to register the remote control.How to use Magic Remote Control 1Press (Wheel) button if there is no pointer on your TV screen. The pointer will then appear on the screen.» If the pointer has not been used for a certain period of time, it will disappear.2You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down.» If the pointer does not work properly after clicking the (Wheel) button, leave the remote control for 10 seconds then use it again.Precautions to Take when Using the Magic Remote Controly Use the remote control within the maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as this will use the same bandwidth (2.4 GHz) as the Magic Remote Control.y The Magic Remote Control may be damaged or may malfunction if it is dropped or receives a heavy impact.y Take care not to bump into nearby furniture or other people when using the Magic Remote Control.y Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.y It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the magic remote control may not perform as expected due to frequency interference.
27ENGENGLISHWATCHING TV NOTEy To display images in the best quality for your home environment, select Home*.y Store* is suitable for the retail environment.y If you select Store*, the any customized settings will switch back to the default settings of Store* in 5 minutes.y Power Indicator feature is disabled in Store Demo mode.4 When the basic settings are complete, press (Wheel). NOTEy If you do not complete the Initial setting, it will appear whenever the TV turns on.y Disconnect the power cord from the power outlet when you do not use the TV for a long period of time.5 To turn the TV off, press the power button on the remote control.USING THE USER GUIDEUser Guide allows you to more easily access the detailed TV information.1 Move the Magic remote control on the bottom of the screen.2 Select SETTINGS and press (Wheel).3 Move the Magic remote control, select SUPPORT and press (Wheel).4 Move the Magic remote control, selectUser Guide and press (Wheel). NOTEy You can also access the User Guide by pressing (User Guide) in the remote control.WATCHING TVTurning the TV on for the first timeWhen you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.1 Connect the power cord to a power outlet.2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.NOTEy You can also access Initial Setting by accessing OPTION in the main menu.3 Follow the on-screen instructions to customize your TV settings according to your preferences.Language Selection* Selects a language to display.ØUsing the Magic remote controlSets the Magic remote contol.ØEnviroment Selection Selects Home* for the home environment.ØNetwork Connection Sets your network to enable network-related feature on the TV.ØTime Zone Setting Selects the time zone and daylight saving.ØAuto Tuning Scans and saves available channels automatically.ØAuto Energy Saving mode SettingSelects Auto Energy Saving mode.Ø3D-On-Start Setting Selects 3D-On-Start option. (For 3D TV)ØSetting is complere. Confirms the setting options.
28ENGENGLISHENTERTAINMENTENTERTAINMENTNetwork ConnectionConnecting to a wired networkConnect the TV to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings.After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.LANExternal modem / Wall outlet / PC(*Not Provided)1&RQQHFWLQJZLUHGQHWZRUN2 CAUTIONy Do not connect a modular phone cable to the LAN port.y Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.y After connecting the LAN port, use the Premium or LG Apps menu.
29ENGENGLISHENTERTAINMENTTo set up the network settings: (Even if your TV has already connected automatically, running setup again will not harm anything)1 Press SETTINGS to access the Home menu.2 Press the Navigation buttons to scroll to NETWORK.3 Press the Navigation buttons to select Network Connection and press (Wheel).4 Press the Navigation buttons to select IP Auto Setting or IP Manual Setting and press (Wheel).1HWZRUN6HWWLQJ,QVHUWWKH,3DGGUHVV,30RGH ܁,30DQXDO6HWWLQJ۽ᯘ,3$GGUHVV ᯘ6XEQHW0DVN ᯘ*DWHZD\ '160RGH,30DQXDO6HWWLQJᯘ'166HUYHU (QWHUᰳ3UHYLRXV ᯙ1H[W- If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually.- IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the TV will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.- IP Manual Setting: Select if there is no DHCP server on the network or you want to set the IP address manually.4 When you are finished, press Enter.#NOTEy If the network setting screen do not appear automatically, press SETTINGS 䮫 NETWORK 䮫 Network Connection.y If the network settings are not set correctly, the functions or services that require the network connection may not work properly.y If the options in Network Connection are not set properly, check your Internet connection and contact your Internet service provider.y To use Internet on TV, you must have active broadband Internet connection at all times.y If you cannot access the Internet, check the network status of your computer. y If the auto IP setting of the router expires, when using IP Auto Setting, you may experience temporary network disconnection. Refer to the owner's manual of the router for details.
30ENGENGLISHENTERTAINMENTConnecting to a wireless networkThe LG Wireless LAN for Broadband/DLNA Adaptor allows the TV to connect to a wireless LAN network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. The easiest method is the WPS button method (Third method in this section). Wireless line sharer NOTEy For enjoying pictures, music, or video stored on a PC using the router, a wired connection is recommended.y When the wireless port of the router is used, there may be restrictions on some functions.y It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference.
31ENGENGLISHTROUBLESHOOTINGTROUBLESHOOTINGGeneralProblem ResolutionCannot control the TV with the remote control.y Check the remote control sensor on the product and try again.y Check if there is any obstacle between the product and the remote control.y Check if the batteries are still working and properly installed ( to , to ).No image display and no sound is produced.y Check if the product is turned on.y Check if the power cord is connected to a wall outlet.y Check if there is a problem in the wall outlet by connecting other products.The TV turns off suddenly. y Check the power control settings. The power supply may be interrupted.y Check if the Auto sleep feature is activated in the Time settings. y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.OPEN SOURCE SOFTWARE NOTICETo obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
32ENGENGLISHSPECIFICATIONSSPECIFICATIONSProduct specifications may be changed without prior notice due to upgrade of product functions.Power requirement USA, Canada, Mexico: AC 120 V ~ 50 / 60 HzOther Country: AC 100 - 240 V ~ 50 / 60 HzTelevision System NTSC-M, ATSC, 64 & 256 QAMProgram Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135External Antenna Impedance 75 ΩEnvironmentconditionOperating Temperature0 - 40 °COperating Humidity Less than 80 %Storage Temperature -20 - 60 °CStorage Humidity Less than 85 %MODELS32LS5700(32LS5700-UA)42LS5700(42LS5700-UA)32LS5750(32LS5750-UA)42LS5750(42LS5750-UA)Dimensions(Width x Height x Depth)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)979.0 mm x 660.0 mm x 269.0 mm(38.5 inch x 25.9 inch x 10.5 inch)Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)979.0 mm x 593.0 mm x 35.5 mm(38.5 inch x 23.3 inch x 1.3 inch)Weight With stand 29.8 kg (65.6 lbs) 15.1 kg (33.2 lbs)Without stand 27.5 kg (60.6 lbs) 12.7 kg (27.9 lbs)Current Value / Power consumption 0.7 A / 70 W 1.1 A / 110 WMODELS47LS5700(47LS5700-UA)55LS5700(55LS5700-UA)47LS5750(47LS5750-UA)55LS5750(55LS5750-UA)Dimensions(Width x Height x Depth)With stand1089.0 mm x 720.0 mm x 269.0 mm(42.8 inch x 28.3 inch x 10.5 inch)1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)Without stand1089.0 mm x 655.0 mm x 35.5 mm(42.8 inch x 25.7 inch x 1.3 inch)1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)Weight With stand 17.8 kg (39.2 lbs) 29.8 kg (65.6 lbs)Without stand 15.4 kg (33.9 lbs) 27.5 kg (60.6 lbs)Current Value / Power consumption 1.4 A / 140 W 1.6 A / 160 W
33ENGENGLISHSPECIFICATIONSMODELS42LM6200(42LM6200-UA)47LM6200(47LM6200-UA)42LM6250(42LM6250-UA)47LM6250(47LM6250-UA)Dimensions(Width x Height x Depth)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)Weight With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs)Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs)Current Value / Power consumption 1.1 A / 110 W 1.4 A / 140 WMODELS55LM6200(55LM6200-UA) 65LM6200(65LM6200-UA)55LM6250(55LM6250-UA)Dimensions(Width x Height x Depth)With stand1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)Without stand1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)Weight With stand 42.6 kg (93.9 lbs) 29.8 kg (65.6 lbs)Without stand 38.5 kg (84.8 lbs) 27.5 kg (60.6 lbs)Current Value / Power consumption 1.6 A / 160 W 1.7 A / 170 WMODELS 42LM6700(42LM6700-UA)47LM6700(47LM6700-UA)Dimensions(Width x Height x Depth)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)Weight With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs)Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs)Current Value / Power consumption 1.1 A / 110 W 1.4 A / 140 WMODELS 55LM6700(55LM6700-UA)Dimensions(Width x Height x Depth)With stand 1232.0 mm x 795.0 mm x 54.5 mm(48.5 inch x 31.2 inch x 2.1 inch)Without stand 1232.0 mm x 716.0 mm x 54.5 mm(48.5 inch x 28.1 inch x 2.1 inch)Weight With stand 25.0 kg (55.1 lbs)Without stand 21.3 kg (46.9 lbs)Current Value / Power consumption 1.6 A / 160 WMODELS 47LM7600(47LM7600-UA)55LM7600(55LM7600-UA)Dimensions(Width x Height x Depth)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)Weight With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs)Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs)Current Value / Power consumption 1.4 A / 140 W 1.6 A / 160 W
34ENGENGLISHSPECIFICATIONSWireless LAN for Broadband/DLNA Adaptor SPECThis device only works with compatible LG TV.Standard IEEE802.11a/b/g/nFrequency Range2402 to 2483 MHz5150 to 5250 MHz5725 to 5850 MHzModulation CCK / OFDM / MIMOOutput Power (Typical)802.11a: 14 dBm802.11b: 17 dBm802.11g: 14 dBm802.11n: 13 dBmData rate802.11a/g: 54 Mbps802.11b: 11 Mbps802.11n: 300 MbpsAntenna Gain (Typical)2402 to 2483 MHz: 1.17 dBi5150 to 5250 MHz: 4.67 dBi5725 to 5850 MHz: 3.30 dBi Occupied bandwidth 802.11a/b/g: HT20 802.11n: HT20/40Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.y FCC ID of Wi-Fi module inside TV FCC ID: BEJTWFMB003D RF module (BM-LDS302) specification For TV By using a 2.4 GHz bandwidth radio frequency(RF).y Output: 10 dBm or lowery Maximum Communication Distance: Line of Open Sight approx. 10 m (30 ft)y Bandwidth: 2.4 GHz (2.400 GHz ~ 2.4835 GHz)y Transfer Rate: 3 Mbpsy FCC ID of RF module inside TV FCC ID: BEJLDS302
35ENGENGLISHMAINTENANCEMAINTENANCEUpdate and clean your TV regularly to keep the best performance and to extend the product lifespan.Cleaning Your TV CAUTIONy Make sure to turn the power off and disconnect the power cord and all other cables first.y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.Screen and frameTo remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTIONy Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.Cabinet and standTo remove dust or light dirt, wipe the cabinet with a dry, clean, and soft cloth.To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe immediately with a dry cloth. CAUTIONy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.y Do not use any chemicals as this may deteriorate the surface. Power cordRemove the accumulated dust or dirt on the power cord regularly.
ederal Communications Commission(FCC) Statement) Federal Communications Commission(FCC) StatementYou are cautioned that changes or modifications not expressly approved by You are cautioned that changes or modifications not expressly approved by the part responsiblethe part responsiblefor compliance could void the user’s authority to operate the equipmentfor compliance could void the user’s authority to operate the equipmentfor compliance could void the user s authority to operate the equipment.for compliance could void the user s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.Class B digital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful These limits are designed to provide reasonable protection against harmful it f i id tili tlltiit f i id tili tlltiinterference in a residential installation.interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a However, there is no guarantee that interference will not occur in a particular installationparticular installationparticular installation.particular installation.If this equipment does cause harmful interference to radio or television If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the the user is encouraged to try to correct the interference by one or more of the following measures:interference by one or more of the following measures:--. Reorient or relocate the receiving antenna.. Reorient or relocate the receiving antenna.--. Increase the separation between the equipment and receiver.. Increase the separation between the equipment and receiver.--. Connect the equipment into an outlet on a circuit different from that to . Connect the equipment into an outlet on a circuit different from that to which the receiver is connectedwhich the receiver is connectedwhich the receiver is connectedwhich the receiver is connected--. Consult the dealer or an experienced radio/TV technician for help.. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:Operation is subject to the following two conditions:1) this device may not cause harmful interference, and1) this device may not cause harmful interference, and2) this device must accept any interference received, including interference 2) this device must accept any interference received, including interference that may cause undesired operation of the device.that may cause undesired operation of the device.Id lId lIndoor use onlyIndoor use onlyFCC Caution: Any changes or modifications not expressly approved by the FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate party responsible for compliance could void the user's authority to operate this equipment.this equipment.
The model and serial number of the TV is located on the back and/or one side of the TV.Record it below should you ever need service.MODELSERIALThis product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.1-800-243-00001-888-865-30261-888-542-2623USA, Consumer UserUSA, Commercial UserCANADARegister your product Online!LG Customer Information CenterFor inquires or comments, visit www.lg.com or call;(For LS5700/LM6700/LM7600 series, 42/47/55LS5750, 42/47/55LM6200 USA, Canada, Mexico)www.lg.com

Navigation menu