LG Electronics USA 47WV30MS MONITOR SIGNAGE User Manual EMISSION TEST REPORT

Download:
Mirror Download [FCC.gov]
Document ID	1669129
Application ID	Hx+GWJCE9ZRE2JpDzosdPg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	246.34kB (3079221 bits)
Date Submitted	2012-04-04 00:00:00
Date Available	2012-05-19 00:00:00
Creation Date	2012-04-03 13:29:15
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2012-04-03 13:36:10
Document Title	EMISSION TEST REPORT
Document Creator	Microsoft® Office Word 2007
Document Author:	최선미

Order Number
: GETEC-C1-12-093
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-12-040
Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: MONITOR SIGNAGE
FCC ID.: BEJ47WV30MS
ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
47WV30MS
47WV30BR
47WV30BS
47WV30-BAAM
47WV30-BAAL
www.lg.com
2
TABLE OF CONTENTS
CONTENTS
ENGLISH
ENG
LICENSE
ASSEMBLING AND
PREPARING
Unpacking
Parts
To install in a Portrait Layout
Remove L-brackets before Installation
Moving Handles
- Moving the device in a vertical position
- Moving the device in a horizontal
position
23
- IR Receiver connection
24
Adjusting the screen
24
- Selecting an image mode
24
- Customizing image options
25
- Customizing PC display options
25
Adjusting the sound
25
- Selecting an sound mode
26
- Customizing sound options
26
Using additional options
26
- Adjusting aspect ratio
28
ENTERTAINMENT
28
- Connecting to a wired network
STORAGE METHOD FOR PANEL
29
- Network Status
PROTECTION
30
- Connecting USB storage devices
- Correct Method
31
- Browsing files
- Incorrect Method
33
- Viewing movies
10
Installing on a wall
36
- Viewing photos
11
EXTERNAL EQUIPMENT SETUP
39
- Listening to music
11
- IR RECEIVER
42
- DivXÂŽ VOD Guide
12
Tiling Displays
12
- How to Join Sets - Installing Set 1
13
- How to Join Sets - Installing Set 2
43
CUSTOMIZING SETTINGS
14
- How to Join Sets - Installing Set 3
43
Accessing main menus
15
- How to Join Sets - Installing Set 4
44
- PICTURE settings
16
Inserting the Cable Holder
47
- AUDIO settings
48
- TIME settings
49
- OPTION settings
52
- NETWORK settings
53
MAKING CONNECTIONS
54
Connecting to a HD receiver, DVD or
17
REMOTE CONTROL
19
Displaying the device name connected to
20
Picture ID
an input port
21
VCR player
USING THE MONITOR SET
54
- HDMI connection
21
Connecting to a PC
54
- DVI - HDMI connection
21
- RGB connection
55
- Component connection
22
- DVI connection
55
- AV connection (Only 47WV30BR and
22
- HDMI connection
23
- Audio connection
47WV30MS)
TABLE OF CONTENTS
Connecting to the LAN
56
- LAN connection
56
Connecting to a USB
57
Daisy Chain Monitors
57
- RGB Cable
57
- DVI Cable
58
TROUBLESHOOTING
61
SPECIFICATIONS
63
RS-232 CONTROL
NOTE
The following three phenomena may occur due to the characteristics of the Super Narrow Bezel
y
LCD. They are not related to the display's performance.
1. The edges of the screen may become darker or shadows may appear.
2. Light leakage may occur depending on the viewing angle.
3. Some components such as the guide boss or clip may be visible on the edges of the screen.
ENG
ENGLISH
56
4
LICENSE
LICENSE
ENGLISH
ENG
A different license is supported depending on the model. Visit www.lg.com for more information on the
license.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivXÂŽ is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX CertifiedÂŽ device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedÂŽ device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your
registration.
DivX CertifiedÂŽ to play DivXÂŽ video up to HD 1080p, including premium content.
DivXÂŽ, DivX CertifiedÂŽ and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENG
ENGLISH
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Power Cord
RGB Cable
DVI Cable
CD (Owner's Manual, SuperSign
Program, SuperSign Manual) /
Card
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
IR Receiver
MNO
Guide bracket
Ring Core
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
M4 x 10L
Screw (4ea)
M6
Screw (4ea)
Cable holder
(2ea)
Power cable holder
U-shaped fixture
RS-232C Cable
Remote control and Batteries
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using pirated items are not covered by the warranty.
y
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade
y
of product functions.
How to Use a Ring Core
y
A ring core reduces electromagnetic waves emitted from the IR receiver.
Loop the cable through the core once, before using it as illustrated.
Ring Core
6
ASSEMBLING AND PREPARING
Parts
ENGLISH
ENG
< 47WV30MS/47WV30BR >
RS-232C
DVI OUT
DVI IN
/DVI
(CONTROL)
USB
RGB OUT
AUDIO
(RGB/DVI)
LAN
COMPONENT IN
SPEAKER
(8Ί)
RGB IN
REMOTE
VIDEO
CONTROL IN
AV IN
AUIDO
Connection panel
< 47WV30BS/47WV30-BAAM/47WV30-BAAL >
RS-232C
(CONTROL)
DVI OUT
DVI IN
/DVI
USB
RGB OUT
AUDIO
(RGB/DVI)
LAN
AUDIO
RGB IN
REMOTE
CONTROL IN
COMPONENT IN
Connection panel
SPEAKER
(8Ί)
ASSEMBLING AND PREPARING
To install in a Portrait Layout
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.
NOTE
Keep the removed L-brackets and use them when moving the monitor later.
ENG
ENGLISH
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
8
ASSEMBLING AND PREPARING
Moving Handles
ENGLISH
ENG
Moving the device in a vertical
position
Moving the device in a horizontal
position
Hold the vertical handles on the left and right
sides or the left and right handles on the back of
the display.
Have the screen facing down and hold the vertical
handles on the left and right sides.
Left and right handles
at the back
Vertical handle
on the side
Vertical handle
on the side
CAUTION
Be careful not to directly touch the panel or expose it to shock when moving the monitor.
y
Hold the monitor with the handles as the corners of the front panel are sharp, which may cause an
y
injury.
ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
ENG
ENGLISH
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
Panel
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor is
clean and then lay the product down carefully with the
panel facing either upward or downward. At this time,
be careful for objects not to fall on the panel.
10
ASSEMBLING AND PREPARING
Installing on a wall
CAUTION
ENGLISH
ENG
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
20 cm
10 cm
10 cm
10 cm
If you want to mount the monitor on the wall (optional), attach the wall mounting bracket to the rear
of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Use the wall mount plate and screws that comply
with the VESA standard.
Use the wall mount plate and screws conforming
to the VESA standard.
NOTE
Do not install the product in a place with
y
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
Disconnect the power cord first, and then
y
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
y
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
y
instructions supplied with the wall mount.
ASSEMBLING AND PREPARING
11
EXTERNAL EQUIPMENT SETUP
ENG
ENGLISH
IR RECEIVER
This allows a remote control sensor to be placed
in a custom location. Then that display can control
other displays via an RS-232 cable. Refer to page
19 for more information.
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
12
ASSEMBLING AND PREPARING
Tiling Displays
ENGLISH
ENG
How to Join Sets - Installing Set 1
*Example of 2 x 2 tiling
* The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure
to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the
remote control. Set the guide bracket into the bracket groove using screws and mount the set to the wall
mount plate or the wall.
Guide bracket
  
VESA wall mount
Guide bracket
Wall mount plate

* The wall mount plate is shaded in gray in the illustration to help you see it.
Screws for fixing
the guide bracket
ASSEMBLING AND PREPARING
13
How to Join Sets - Installing Set 2

Guide bracket

Remove the
guide brackets

How to remove the guide brackets
* Unscrew the guide bracket screws from the rear of the set and remove the guide brackets.
* Once the screws are removed, the guide brackets will drop. You need to remove them through the gap
on the sides of the set.
* This can be done only when there is enough space between the set and the wall mount plate or the wall
to unscrew the screws. (Please check whether there is enough space to remove the screws before fixing
the guide brackets.)

ENG
ENGLISH
Join Set 2 to Set 1 using the guide brackets on the top side of Set 1 and mount the two sets to the wall
mount plate or the wall.
Remove the guide brackets after mounting the sets.
14
ASSEMBLING AND PREPARING
How to Join Sets - Installing Set 3
ENGLISH
ENG
Fix the guide brackets to Set 3 following the steps above, and loosely mount the set to the wall mount
plate or the wall.
#2
#1
#3


Minimize the space between the sides of the sets using the U-shaped fixture.
         
mount plate or the wall.
When the sets are firmly mounted to the wall, remove the U-shaped fixtures.
 
 
ASSEMBLING AND PREPARING
15
How to Join Sets - Installing Set 4
Set 4 joined to the rest of the sets
(2 x 2 tiling)
Wall mount plate or wall
Display set
NOTE
yThe guide brackets for tiling should only be used to join sets and should be removed once they are joined.
yThe guide brackets should only be used as the assisting tool when tiling sets. The load applied to each set
should be supported by the wall mount plate or the wall using a VESA wall mount (800 x 400).
y(Each set must be firmly mounted to the wall mount plate or the wall.)
yThe guide brackets must be removed once the sets are joined. When joining the sets without removing the
guide brackets, extra caution is required to prevent damage due to the set weight.
yThe U-shaped fixtures must also be removed after mounting the set to the wall mount plate or the wall.
y      !  "    
performance of the device.
ENG
ENGLISH
Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using
the U-shaped fixtures.
When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures.
Remove the guide brackets. See .
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
16
ASSEMBLING AND PREPARING
Inserting the Cable Holder
ENGLISH
ENG
As illustrated, insert two cable holders into the
holes at the bottom rear of the set to organize the
cable bundles.
As illustrated, screw the power cable holder into
the hole on the bottom rear of the set to hold the
power cables together. (This is to put the power
cables inside the holder.)
17
REMOTE CONTROL
REMOTE CONTROL
ENG
ENGLISH
The descriptions in this manual are based on the buttons of the remote control. Please
read this manual carefully and use the Monitor set correctly.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
To replace batteries, open the battery cover, replace
batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery
cover. To remove the batteries, perform the installation
actions in reverse.
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
MNO
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
CAUTION
Do not mix old and new batteries, as this
y
may damage the remote control.
Make sure to point the remote control at the
y
remote control sensor on the Monitor.
Make sure to point the remote control to the remote control sensor on the Monitor set.
Power On / Off
Switches the set on from
standby or off to standby.
Monitor On / Off
Turn off the monitor and then
turn it back on.
Energy Saving
Adjust the Energy Saving
mode of the SET.
INPUT
If you press the button once, the
following Input Signal Window
will appear. Select the signal
type you want using the button.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
1/a/A
This button selection is not
applicable.
.,!
GHI
PQRS
1/a/A
PSM
Selects the Picture Status
Mode.
ABC
JKL
TUV
-*#
Number and Alphabet
Type numbers.
The alphabet selection is not
applicable.
DEF
MNO
Clear
This button selection is not
applicable.
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
Volume Up/Down
Adjusts the volume.
MUTE
MENU
AUTO
S.MENU
ARC
Selects the Aspect Ratio Mode.
BRIGHTNESS
Moves to the previous or next
screen.
MUTE
Switches the sound on or off.
18
REMOTE CONTROL
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
ENGLISH
ENG
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
MNO
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
EXIT
ID
ON
MENU(See p.43)
Selects a menu.
Clears all on-screen displays
and returns to Set viewing
from any menu.
Up/Down/Left/Right
Allows you to navigate the
on-screen menus and adjust
the system settings to your
preference.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
NESS
ID ON/OFF
Allows you to set the Picture
ID or turn it off. Use this
button to control the individual
monitors connected in RS232C mode. (It works properly
only when Set IDs are
assigned.)
USB Menu control
Controls media playback.
MUTE
MENU
OK
Accepts your selection or
displays the current mode.
BACK
Allows the user to move
back one step in an interactive
application.
OFF
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing.
TILE
Selects the TILE Mode.
REMOTE CONTROL
19
Displaying the device name connected to an input port
1 Access the Input list screen and press the blue
(input label) button on the remote control.
BACK
TILE
EXIT
ID
OFF
ON
2 You can assign an input label for every input
except USB.
Input Label
AV
Component
RGB
HDMI
DVI-D
Close
NOTE
External inputs supported: AV, Component,
y
RGB, HDMI, DVI-D. (AV only support 47WV30BR and 47WV30MS)
Labels available : VCR, DVD, Set top box,
y
Satellite, Game, PC, Blue-ray, HD-DVD
The input labels are displayed on the Input
y
Label screen or at the top left of the screen
when you change the external input setting.
For DTV/PC-compatible signals, such as
y
1080p 60 Hz, the screen settings may
change according to the input label. The Just
Scan option is available if a PC is connected
as an external device. (1080p only support
47WV30BR and 47WV30MS)
47WV30-BAAL/47WV30-BAAM/47WV30BS
y
does not support AV input.
ENG
ENGLISH
Display which devices are connected to which
external input ports.
20
REMOTE CONTROL
Picture ID
ENGLISH
ENG
Picture ID is used to change the settings of a
specific set (display) using a single IR receiver for
multi-vision. The set receiving the IR signal communicates with another set via the RS232 connector. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only
displays with the same Picture ID and Set ID can
be controlled remotely.
2 If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 1 to 4.Assign the ID you
want.
Picture ID
Off
Close
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
pyGyŒŠŒŒ™
Ỏぎ LG=4
Ỏぎ LG=5
yz YZYj
Picture ID
Slfwxuh#LG
Off
vGGGGG
F Close
o rvh
Ỏぎ LG=6
If you assign the Set ID to each set with
y
multi-vision, and then assign the Picture ID
using the red button on the remote control,
the key command is displayed for the set
with the same Set ID and Picture ID. A set
with different Set IDs and Picture IDs cannot
be controlled by IR signals.
Refer to the Set ID on page 46 for assigning
y
a Set ID.
The maximum value of the Picture ID can be
y
set in the Total Set ID menu.
Please refer to the Installation Manual for
y
more information on the assignment of a
Total Set ID.
Ỏぎ LG=7
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
1 Press the ID On (Red) button on the remote control.
BACK
TILE
ID
ON
OFF
EXIT
NOTE
For example, if the Picture ID is assigned
y
to 2, the upper right display (Set ID: 2) can
be controlled by IR signals.
For each set, you can change the settings
y
for the PICTURE, AUDIO, TIME, OPTION,
NETWORK and MY MEDIA menus or the
hot keys on the remote control.
If you press the ID OFF (Green) button,
y
the Picture IDs for all sets are turned off. If
you then press any button on the remote
control, all sets will start working again.
The Picture ID function may not work dury
ing MY MEDIA operating.
USING THE MONITOR SET
21
USING THE MONITOR SET
NOTE
It is recommended to you use an HDMI
y
connection for the best image quality.
RGB connection
Transmits an analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations. Select RGB input source on
the monitor.
Back of the Monitor Set
RGB OUT
CAUTION
RGB IN
Connect the signal
y
input cable and tighten
it by turning the screws
clockwise.
PC
NOTE
Apple computers may
y
require an adapter
to connect to this
monitor. Call or visit
their web site for more
information.
CAUTION
Do not press the screen with your finger for
y
this damage the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
ENG
ENGLISH
Connecting to a PC
22
USING THE MONITOR SET
ENGLISH
ENG
DVI connection
HDMI connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown
in the following illustrations. Select HDMI input
source on the monitor.
Back of the Monitor Set
DVI IN
Back of the Monitor Set
/DVI
(not included)
PC
PC
NOTE
If you do not use an optional external
y
speaker, connect the PC to the Monitor set
with audio cable.
Use a shielded signal interface cable, such
y
as D-sub 15 pin signal cable and DVI to
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
If you want to use HDMI-PC mode, you must
y
set the input label to PC mode.
NOTE
Use a High Speed HDMI™ Cable.
y
Please check the PC environment if you
y
cannot hear the sound in HDMI mode.
If you want to use HDMI-PC mode, you must
y
set the input label to PC mode.
It may not be compatible if you use HDMI-PC
y
mode.
USING THE MONITOR SET
IR Receiver connection
Transmits the audio signals from your PC to the
Monitor set. Connect the PC and the Monitor set
with the Audio cable as shown in the following
illustrations. You should set PC as an input label
to connect the PC to the Monitor set with an Audio
connection.
Allows the use of a wired remote or IR receiver
extension.
Back of the Monitor Set
AUDIO
(RGB/DVI)
Back of the Monitor Set
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
REMOTE
CONTROL IN
(not included)
PC
NOTE
To ensure the best sound quality and
y
minimize noise, keep the cable as short as
possible.
ENG
ENGLISH
Audio connection
23
24
USING THE MONITOR SET
ENGLISH
ENG
Adjusting the screen
Customizing image options
Selecting an image mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images using optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
Mode
Vivid
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for the
cinematic look and enjoy movies as if you
are in a movie theater.
Game
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Description
Adjusts the video image for the retail
environment by enhancing the Contrast,
Brightness, Color, and Sharpness.
Standard
Sports
2 Press the Navigation buttons to scroll to
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Optimizes the video image for a fast
gaming screen such as PCs or games.
Option
Backlight
Description
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
image is saturated.
Brightness
Adjusts the base level of the signal in
the image. You may use Brightness
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
when the dark part of the image is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts the balance between Red
and Green levels.
Tint
Adjusts intensity of all Colors.
Color
Set to warm to enhance hotter Colors
Temperature
such as red, or set to cool to make
picture bluish.
USING THE MONITOR SET
Customizes the advanced options.
Control
See more information about advanced
options See p.46.
Picture
Restores the options to the default
Reset
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Adjusting the sound
Selecting an sound mode
Play the sound in its optimized settings by
selecting one of the preset sound modes.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
Customizing PC display options
Customize options of each image mode for the
best image quality.
This function works in the following mode:
y
RGB[PC] mode.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Mode
Standard
Description
Selects when you want standard-quality
sound.
Music
Selects when you listen to music.
Cinema
Selects when you watch movies.
Sports
Selects when you watch sports events.
Game
Selects when you play games.
3 Press the Navigation buttons to scroll to
Screen and press OK.
4 Select and adjust following options, and then
When you return to the previous menu, press
BACK.
press OK.
Option
Description
Resolution
Selects a proper Resolution.
Auto
Sets to adjust the screen Position, Size
Configure
and Phase automatically. The displayed
image may be unstable for a few seconds
while the configuration is in progress.
Position/
Adjusts the options when the image is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
5 When you are finished, press EXIT.
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Advanced
25
26
USING THE MONITOR SET
ENGLISH
ENG
Customizing sound options
Using additional options
Customize options of each sound mode for the
best sound quality.
Adjusting aspect ratio
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
CAUTION
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides
Sound
5.1 channel stereo sound from two
If a fixed image displays on the screen for a
y
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
y
period of time, image burn may occur on
the letterboxed area of the screen.
speakers.
Treble
Controls the dominant sounds in the
output. When you turn up the treble, it
NOTE
will increase the output to the higher
frequency range.
Bass
Controls the softer sounds in the
You can also change the image size by
accessing the main menus.
output. When you turn up the bass, it
will increase the output to the lower
MODE
frequency range.
Reset
AV
Component
Resets the sound mode to the default
ARC
setting.
16:9
Just Scan
1:1
4:3
Zoom
Cinema
Zoom
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
RGB
DVI-D
HDMI
PC
DTV
PC
DTV
PC
USING THE MONITOR SET
27
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only HDMI PC, DVI-D PC, RGB PC)
* Pictures with resolution higher than 1366X768
are adjusted to the 1366x768 while maintaining
the original aspect ratio.
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
ENG
ENGLISH
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
28
ENTERTAINMENT
ENTERTAINMENT
ENGLISH
ENG
Connecting to a wired network
(Depending on model)
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of netmworks may require the display network settings to be adjusted. For most netmworks,
the display will connect to automatically without
any adjustments.
For detailed information, contact your internet
provider or router manual.
LAN
Router
LAN
WAN
Router
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
Cable modem
ETHERNET
Cable modem
Internet
Internet
CAUTION
y
Do not connect a modular phone cable to
the LAN port.
y
Since there are various connection methods, please follow the specifications of
your telecommunication carrier or internet
service provider.
CAUTION
y
Network setting menu will not be available until the display connected to physical
network.
y
Since there are various connection methods, please follow the specifications of
your telecommunication carrier or internet
service provider.
ENTERTAINMENT
NOTE
y
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
y
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Tips for Network setting
y
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
y
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
netmwork, quickly power off and/or disconnect
the power cable of the netmwork router or cable
modem. Then power on and/or connect the
power cable again.
y
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
y
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
y
LG is not responsible for problems within your
internet connection.
y
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
y
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
y
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
y
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENG
ENGLISH
y
If you want to access the Internet directly
on your display, the internet connection
should always be on.
y
If you cannot access the Internet, check
the network conditions from a PC on your
network.
y
When you use Network Setting, check
the LAN cable or check if DHCP in the
router is turned on.
y
If you do not complete the network settings, the network may not work properly.
29
30
ENTERTAINMENT
ENGLISH
ENG
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing files"
on page 31).
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
or
CAUTION
y
Do not turn the display off or remove a
USB storage device while my mediaMenu is activated, as this could result in
loss of files or damage to the USB storage device.
y
Back up your files saved on a USB storage device frequently, as you may lose
or damage the files and this may be not
covered by the warranty.
Tips for using USB storage devices
y
Only a USB storage device is recognizable.
y
If the USB storage device is connected
through a USB hub, the device is not recognizable.
y
A USB storage device using an automatic
recognition program may not be recognized.
y
A USB storage device which uses its own
driver may not be recognized.
y
The recognition speed of a USB storage
device may depend on each device.
y
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
y
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Windows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
y
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
y
Please connect a USB storage device with
the cable provided by the device maker.
y
Some USB storage devices may not be supported or operated smoothly.
y
File alignment method of USB storage
device is similar to Window XP and filename
support of up to 100 English characters.
y
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
31
ENTERTAINMENT
Browsing files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press Navigation buttons to scroll to MUSIC
LIST, PHOTO LIST or MOVIE LIST and press
OK.
Movie List
Photo List
Music List
Page 1/1
Photo List
USB External
001
002
010
011
Page 1/1
Drive1
003
004
005
006
012
013
014
015
Move
To Music List
Change Numbers
007
View
008
009
PAGE
Page Change
Mark Mode
Exit
No.
Description
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
focused on 1
Contents under the folder
focused on 1
Buttom
Description
Repeatedly, press the GREEN button to
Green converted to Photo List->Music List,
button Music List->Movie List or Movie List>Photo List.
Yellow A method to view in 5 large thumbnail
button or simple list.
Blue
Convert to Mark Mode.
button
ENG
ENGLISH
y
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
y
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
y
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
y
If the USB memory device does not work
properly, disconnect and reconnect it.
y
How fast a USB memory device is detected
differs from device to device.
y
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
y
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
y
Any device with more than the recommended
capacity may not work properly.
y
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
y
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
y
Maximum of 999 folders or files can be recognized under one folder.
32
ENTERTAINMENT
Supported file format
ENGLISH
ENG
Type
Movie
Music
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,
TS,TRP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.
vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.
wmv/*.flv/*.avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX3.11, DivX4.12,
DivX5.x, DivX6, Xvid1.00, Xvid1.01,
Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg,
MP3, LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Internal Subtitle format : only, XSUB (It is
the subtitle format used in DivX6 files)
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
y You can play JPEG files only.
y Non-supported files are displayed in the
form of predefined icon.
Only 3D Models
File
Item
Extensions
2D jpeg
jpg
jpe
Profile
supported y SOF0:
file format
baseline
y SOF1:
Extend
Sequential
y SOF2:
Progressive
photo size y Min: 64 X 64
y Max-Normal
Type: 15360
(W) X 8640 (H)
y Progressive
Type: 1920
(W) X 1440 (H)
3D mpo
supported mpo
file format
photo size y 4:3 size:
3,648 x 2,736
2,592 x 1,944
2,048 x 1,536
y 3:2 size:
3,648 x 2,432
MP3
Bit rate 32 to 320
y Sampling rate MPEG1 Layer3 : 32 kHz,
44.1 kHz, 48 kHz
y Sampling rate MPEG2 Layer3 : 16 kHz,
22.05 kHz, 24 kHz
y Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
ENTERTAINMENT
33
5 Play a movie.
Viewing movies
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
y
Non-supported files are displayed the preview
image by icon only
y
Abnormal files are displayed in the form of
bitmap
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Press the Navigation buttons to scroll to a
6 Control playback by using the following buttons.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
001
002
005
006
01:02:30 / 02:30:25
003
Move
Change Numbers
View
PAGE
Page Change
Exit
Mark Mode
Page 1/1
Movie List
Mark Mode
001
002
005
%%
Option
Hide
Exit
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Scans forward in a file
Option
Show the Option menu.
Page 1/1
Drive1
USB External
&&
004
Button
To Photo list
II
Page 1/1
Drive1
USB External
&%
Page 1/1
Movie List
003
051. Apple_ ......
02:30:25
006
Hide
Hide the menu on the full-sized screen.
EXIT
Return to Movie List.
Skips to specific points in a file dur-
004
ing playback. The time of a specific
< or >
Move
Play Marked
Mark All
Unmark All
View
Exit Mark Mode
PAGE
point will appear on the status bar. In
some files, this function may not work
Page Change
Exit
properly.
Press the ENERGY SAVING button
Menu
Play Marked
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark Mode Exit the Mark Mode.
ENERGY
repeatedly to increase the brightness
SAVING
of your screen.
ENG
ENGLISH
This display will play media files from a USB drive
or a DLNA server on your network.
34
ENTERTAINMENT
Tips for using playing video files
ENGLISH
ENG
y
Some user-created subtitles may not work
properly.
y
Some special characters are not supported
in subtitles.
y
HTML tags are not supported in subtitles.
y
Subtitles in languages other than the supported languages are not available.
y
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
y
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
y
Movie files produced with some encoders
may not be played correctly.
y
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
y
Videos with resolution higher than
1920X1080 at 25/30P may not play properly
depending on the frame.
y
Movie files other than the specified types and
formats may not work properly.
y
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
y
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
y
DTS Audio codec is not supported.
y
A movie file more than 30 GB in file size is
not supported for playback.
y
A DivX movie file and its subtitle file must be
located in the same folder.
y
A video file name and its subtitle file name
must be identical for it to be displayed.
y
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
y
Files encoded with GMC(Global Motion
Compensation) may not be played.
When you are watching the movie by Movie
y
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
y
Option values changed in Movie List does
not affect Photo List and Music List.
y
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
y
When replaying the video file after stopping,
you can play from where it stopped previously.
MAINTENANCE
When you select the Set Video Play,,
Support Language
English, Spanish, French,
German, Italian, Swedish, Finnish,
the Picture Size, Audio Language, Subtitle
Language or Repeat.
Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic,
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
with a single audio track cannot be
selected.
Subtitle Lan-
Turn on/off the subtitle.
guage
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
NOTE
y
Only 10,000 of sync blocks can be supported
within the subtitle file.
y
When playing a video, you can adjust the
Picture Size by pressing the RATIO button.
y
Subtitles in your language are only supported when the OSD menu is also in this
language.
y
The code page options may be disabled depending on the language of the subtitle files.
y
Select the appropriate code page for the
subtitle files.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to show
Code Page
Latin1
35
36
MAINTENANCE
When you select the Set Video,,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
Page 1/1
Photo List
USB External
001
002
010
Page 1/1
Drive1
011
003
004
005
006
012
013
014
015
When you select the Set Audio,,
Move
Change Numbers
To Music List
007
View
008
009
PAGE
Page Change
Exit
Mark Mode
1 Press the Navigation buttons to scroll to show
Page 1/1
the Sound Mode, Clear Voice II or Balance.
Photo List
Mark Mode
USB External
Page 1/1
Drive1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Viewing photos
Move
View Marked
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
1 Press the Navigation buttons to scroll to My
Mark All
Menu
Unmark All
007
View
008
009
PAGE
Page Change
Exit Mark Mode
Exit
Description
View Marked
Display the selected photo file.
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
Exit Mark Mode Exit the Mark Mode.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
5 View photos.
you want and press OK.
NOTE
y
Non-supported files are displayed the preview image by icon only
y
Abnormal files are displayed in the form of
bitmap
MAINTENANCE
Using photo options
ENER- Press the ENERGY SAVING button
GY SAVING repeatedly to change the brightness of
your screen.
Option
y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y TransitionEffect: Set the view mode
of the slideshow.
y BGM: Selects a music folder for the
background music.
NOTE
yYou cannot change the music
folder while the background
music is playing.
yYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
Options
Option
BGM
Hide
Exit
Number of selected photos
Option
Description
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
Rotate
Rotates photos clockwise (90°, 180°,
270°, 360°).
Hide
Hides the option window.
To display the options, press OK.
EXIT
Return to Photo List.
Photo options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
NOTE
yThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Zoom
Enlarges the image to 200% or 400%.
NOTE
yZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
yFor image of 960×540 pixel
size or larger, only zoom to
400% works properly.
NOTE
y
Option values changed in Movie List does
not affect Photo List and Music List.
y
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENG
ENGLISH
Use the following options while viewing photos.
37
38
MAINTENANCE
When you select the Set Photo View,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Fade In
Fades the slide out slowly before playing to the next slide.
MAINTENANCE
When you select the Set Video,
39
Listening to music
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Media and press OK.
2 Press the Navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB External
Page 1/1
Drive1
002. -B02.mp3
00:00
001. - B01.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
To Movie List
View
Change Numbers
PAGE
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB External
Page 1/1
Drive1
001. - B01.mp3
00:00
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Play Marked
Mark All
Unmark All
Mark All
View
Unmark All
Page Change
Exit
Description
Display the selected music file.
Mark all music files on the screen.
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
PAGE
Exit Mark Mode
ENG
ENGLISH
1 Press the Navigation buttons to scroll to make
40
MAINTENANCE
6 Control playback by using the following buttons.
ENGLISH
ENG
This unit cannot support the ID3 Tag
y
embedded MP3 files.
Page 1/1
Music List
^ }~!
Drive1
Page 1/1
004. - B04.mp3
00:00
005. - B05.mp3
00:00
006. - B06.mp3
00:00
007. - B07.mp3
00:00
NOTE
008. - B08.mp3
00:00
&%
005. - B05.mp3
02:30 / 03:25
II
&&
Button
%%
MENU
Play with Photo
Option
Stops playback
Plays a music file
Pauses or resumes playback
Skips to the next file
v or w
Green
button
ENERGY
SAVING
Option
Hide
EXIT
< or >
Hide
Exit
Description
Tips for playing music files
Skips to the previous file
When playing,
When you press the v button, the previous music file will be played.
When you press the w button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Press the ENERGY SAVING button repeatedly to change the brightness of
your screen.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
y
Non-supported files are displayed the preview image by icon only .
y
Abnormal files are displayed in the form of
bitmap .
y
A damaged or corrupted music does not play
but displays 00:00 in playtime.
y
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
y
If you press OK, r buttons, screen saver is
stopped.
y
The PLAY(s), Pause(t), r , w, v buttons on the remote control are also available
in this mode.
y
You can use the w button to select the next
music and the v button to select the previous music.
file name
002. B02.mp3
%@@\^`{@|\@|
Time elapsed /Duration
MAINTENANCE
41
Music options
2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
y
Option values changed in Movie List does
not affect Photo List and Music List.
y
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
When you select the Set Audio Play.,
1 Press the Navigation buttons to scroll to select
the Repeat or Random.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
When you select the Set Audio,,
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
ENG
ENGLISH
1 Press MENU to access the Pop-Up menus.
42
MAINTENANCE
DivXÂŽ VOD Guide
ENGLISH
ENG
DivXÂŽ VOD Registration
In order to play purchased or rented DivXÂŽ VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
DivXÂŽ VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
Reg. Code and press OK.
5 View the registration code of your display.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to Deactivation and press OK.
5 Press the Navigation buttons to select Yes to
confirm.
6 When you are finished, press EXIT.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
When you return to the previous menu, press
BACK.
Yes
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
y
While you are checking the registration
code, some buttons may not work.
y
If you use the DivX registration code
of another device, you cannot play the
rented or purchased DivX file. Make sure
to use the DivX registration code assigned to your TV.
y
The video or audio files that are not converted by the standard DivX codec may
be corrupted or not be played.
y
The DivX VOD code allows you to activate up to 6 devices under one account.
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
y
must register your device again to see
DivXÂŽ VOD contents.
CUSTOMIZING SETTINGS
43
CUSTOMIZING SETTINGS
ENG
ENGLISH
Accessing main menus
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.44)
Adjusts the image size,
quality, or effect
PICTURE
OPTION
AUDIO (See p.47)
Adjusts the sound quality,
effect, or volume level
AUDIO
NETWORK
OPTION (See p.49)
Customizes the general settings
NETWORK (See p.53)
Sets up the network
setting.
TIME (See p.48)
Sets the time, date or
Timer feature
TIME
MY MEDIA
MY MEDIA
(See p.30)
Display and play
movie, photo and
music content
stored on your USB
44
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
ENGLISH
ENG
‚ƒ 
1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to PICTURE and
press OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
Energy Saving
Move
OK
ፌ
\`„\
: Off
†‡ 
ˆ  
\
‰! 
‹ 
‰ 

Œ@
‹  
„@
 
‹  ‘
‚‡‹  
ˆ ƒ
Š@
`@@
Œ@

The available picture settings are described in the following:
Setting
Description
Aspect Ratio
Changes the image size to view images at its optimal size (See p.26).
Energy
Saving
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Smart Energy
Saving
Option
Off
The backlight is off.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen off
The screen turns off in 3 seconds.
Adjusts the backlight and contrast depending on the screen brightness.
* 47WV30-BAAL does not support this function.
Level
Picture Mode
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Off
Disables the Smart Energy Saving function.
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
CUSTOMIZING SETTINGS
Setting
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See "Specification" See p.62 for the recommended
resolution for each model.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark
part of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts the balance between red and green levels.
Tint
Adjusts intensity of all Colors.
Color Temperature
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options.
Picture Reset
Restores the options to the default setting.
NOTE
yIf the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game the subsequent
menus will be automatically set.
yYou cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yWhen using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.
yIf Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.
ENG
ENGLISH
SCREEN
(In RGB-PC
Mode Only)
45
46
CUSTOMIZING SETTINGS
Advanced image options
ENGLISH
ENG
Setting
Description
Dynamic Contrast
(Off/Low/Medium/
High)
Optimizes the contrast automatically according to the brightness of the reflection.
(This function can be used only under Component.)
Dynamic Color
(Off/Low/High)
Adjusts the Color of the reflection automatically to reproduce natural colurs as close as
possible.(This function can be used only under Component.)
Clear White
(Off/Low/High)
Make the white area of screen brighter and more white.
Skin Color
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
Removing the noise up to the point where it does not damage the original picture. (This
(Off/Low/Medium/High) function can be used only under Component.)
Digital Noise
This option reduces the noise produced while creating digital video signals.
Reduction
(Off/Low/Medium/High)
Gamma
(Low/Medium/High)
Set your own gamma value.
On the monitor, high gamma values display whitish images and low gamma values display
high contrast images.
Black Level
Low/High
y Low: The reflection of the screen gets darker.
y High: The reflection of the screen gets brighter.
Function works in the following mode - Component, HDMI, DVI-D adjusts the contrast and the
brightness of the screen using the black level of the screen.
CUSTOMIZING SETTINGS
AUDIO settings
AUDIO
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to AUDIO and press
OK.
3 Press the Navigation buttons to scroll to the setting or
Move

OK
ፌ

 
  
 
   
 




option you want and press OK.
 " $ %$ 
- To return to the previous level, press BACK.
%& 

4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Clear Voice ll
Description
By differentiating the human sound range from others, it helps users listen to human voices better.
Balance
Use this function to balance sound from the left and right speakers.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to
the music.
Cinema
Select this option to enjoy sublime sound.
Sports
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate home
      ‡  ‘
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound
from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Controls the softer sounds in the output. When you turn up the
bass, it will increase the output to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI: Outputs the sound of digital signals in digital input (HDMI) mode through the external
monitor speaker connected to the speaker out port of the monitor.
Audio In: Outputs the sound received from the Audio In port in digital input (HDMI) mode through
the external speaker connected to the speaker out port of the monitor.
Speaker
*The speaker is sold separately.
On: Outputs the sound through the external speaker connected to the speaker out port of the
monitor.
Off: Outputs the sound through the external speaker connected to the speaker out port of the
monitor. Use this option when using an external sound device.
ENG
ENGLISH
 
47
48
CUSTOMIZING SETTINGS
TIME settings
TIME
ENGLISH
ENG

1 Press MENU to access the main menus.
Move
 +

2 Press the Navigation buttons to scroll to TIME and press OK.
 +

% + 

3 Press the Navigation buttons to scroll to the setting or option
; = ?

$ 

you want and press OK.
OK
ፌ
$ + ? 
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the Monitor set.
Sleep Timer
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and
turn it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
yOnce the on or off time is set, these functions operate daily at the preset time.
yThe scheduled power-off function works properly only when the device time is set correctly.
yWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
CUSTOMIZING SETTINGS
OPTION settings
OPTION
Move
OK.
[ 
\ +
; 

] ^ 

]  ?

3 Press the Navigation buttons to scroll to the setting or
_
  
option you want and press OK.
;    
- To return to the previous level, press BACK.
]
;  ` ^  q
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause
image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when the product is not used, turn off
the power. Burn-in and related problems are not covered by the warranty on this product.
Setting
Normal
Sets it if image sticking is never a problem
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash
Removes a ghost image on the screen.
Use sparingly. Watch the sets normally for a while before using this feature to
see if the ghost image disappears on its own.
DPM Select
A user can choose to turn the power saving mode on / off.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
* 47WV30-BAAL does not support this function.
Setting
Off
Auto
Factory Reset
Stops auto switch of the input source.
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Select this option to return to the default factory settings.
ENG
ENGLISH
2 Press the Navigation buttons to scroll to OPTION and press
OK
ፌ
@""
1 Press MENU to access the main menus.
49
50
CUSTOMIZING SETTINGS
Setting
Description
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
NOTE
If you change SET ID No, the value of ‘Power On Delay’ will be set to (SET ID No)/3(sec)
to prevent power consumption overload.
ex) SET ID No = 31 䎍 Power On Delay = 10(=31/3)
Tile Mode
You can display the image on multiple sets and view it in a larger size. To use
the Tile Mode on multiple sets with same signal.
Auto Config.
This option optimizes the screen when you connect the set to a new computer
or change to a different mode. If you are not satisfied with the adjustment, you
can manually change the "Position" or "Size".
Position
You can set the position.
Size
You can set the size.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Rotate OSD clockwise (Off, 90°,270°)
Option
Off
Do not rotate OSD
90°
Rotate OSD clockwise 90°.
270°
Rotate OSD clockwise 270°.
ፌ
ͫ͑΀ΗΗ
‫Ͳ͑ח‬ΦΥΠΞΒΥΚΔ͑΄ΥΒΟΕΓΪ͑͑ ͫ͑΀ΗΗ
‫Ͳ͑ח‬ΦΥΠ͑΀ΗΗ͑͑
‫ʹ͑ח‬ΝΠΔΜ
ፌ
RN
ͫ͑΀ΗΗ
Pryh
‫΁͑ח‬ΠΨΖΣ͑΀Ο͑͵ΖΝΒΪ͑͑
ͫ͑΀ΗΗ
RN
ͫ͑΀ΗΗ
Pryh
ͫ͑΀ΗΗ
ͫ͑΀ΗΗ
ͫ͑΀ΗΗ
ͫ͑΀ΗΗ
ͫ͑΀ΗΗ
‫΀͑ח‬ΗΗ͑΅ΚΞΖ͑͑
ͫ͑΀ΗΗ
‫΀͑ח‬Ο͑΅ΚΞΖ͑͑
‫΀͑ח‬ΗΗ͑΅ΚΞΖ͑͑
‫΄͑ח‬ΝΖΖΡ͑΅ΚΞΖΣ͑͑
‫ʹ͑ח‬ΝΠΔΜ
‫΁͑ח‬ΠΨΖΣ͑΀Ο͑͵ΖΝΒΪ͑͑
8-1)
‫Ͳ͑ח‬ΦΥΠ͑΀ΗΗ͑͑
‫Ͳ͑ח‬ΦΥΠΞΒΥΚΔ͑΄ΥΒΟΕΓΪ͑͑ ͫ͑΀ΗΗ
90°
‫΄͑ח‬ΝΖΖΡ͑΅ΚΞΖΣ͑͑
Portrait mode
Setting
‫΀͑ח‬Ο͑΅ΚΞΖ͑͑
Tile Mode
8-1)
ENGLISH
ENG
Set ID
270°
CUSTOMIZING SETTINGS
Setting
Description
Setting
Mode
This option indicates the monitor's internal temperature and controls the fan.
‚ \       ‘
•\    ‘
\        ‘
Hysteresis
The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature
Set the temperature at which the fan is switched on.
Current
Temperature
Current temperature inside the set.
NOTE
yWe recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
yIf the interior temperature of the set exceeds 80°C, the set will be turned off
automatically for safety reasons.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
ENG
ENGLISH
Fan
51
52
CUSTOMIZING SETTINGS
Tile Mode
ENGLISH
ENG
This monitor can be tiled with additional monitors to create a large tiled display.
Off
When the Tile Mode
option is disabled
2X1
When using 2 monitors
ID 1
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4
When using 16 monitors
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
CUSTOMIZING SETTINGS
NETWORK settings
NETWORK
Move
press OK.
\= &
\ 
 
\ 
 
 ^ ; "
 ^ ;
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Elite-W Lite server.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Netmwork is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Elite-W Lite server is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign Elite-W Lite server
- Waiting for approval : When network connection with SuperSign Elite-W Lite server has been
made, but access to server has not been approved by the server
- Rejected : When network connection with SuperSign Elite-W Lite server has been made, but
access to server has been rejected by the server
- Internet is connected : When network connection with SuperSign Elite-W Lite server has been
made and access to server has also been approved by the server
NOTE
y
Network setting menu will not be available until the display connected to physical network.
ENG
ENGLISH
\= & "
2 Press the Navigation buttons to scroll to NETWORK and
OK
ፌ
;? \+ "
1 Press MENU to access the main menus.
53
54
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the Monitor set’s back panel.
1 Find an external device you want to connect to your Monitor set shown in the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - (See p.55)
Component - (See p.56)
AV - (See p.56)
DVD
HDMI - (See p.55)
Component - (See p.56)
AV - (See p.56)
Speaker
USB
Memory storage
- (See p.57)
PC
HDMI - (See p.22)
DVI - (See p.22)
RGB - (See p.21)
Camcorder/Camera
Gaming device
HDMI - (See p.55)
Component - (See p.56)
AV - (See p.56)
HDMI - (See p.55)
Component - (See p.56)
AV - (See p.56)
NOTE
y
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
y
AV(CVBS) can be supported only in 47WV30BR and 47WV30MS models.
MAKING CONNECTIONS
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
HDMI connection
DVI - HDMI connection
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI-HDMI
cable as shown in the following illustration. To
transmit an audio signal, connect an optional audio
cable.
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
Peripheral
Back of the Monitor Set
/DVI
(not included)
(not included)
(not included)
/DVI
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
Peripheral
NOTE
Use a High Speed HDMI™ Cable.
y
High Speed HDMI™ Cables are tested to
y
carry an HD signal up to 1080p and higher.
Dolby Digital is not supported.
y
CAUTION
When connecting
y
an HDMI cable as
illustrated, remove
the screw on the
HDMI connector first.
Back of the Monitor Set
ENG
ENGLISH
Connecting to a HD receiver,
DVD or VCR player
55
56
MAKING CONNECTIONS
Component connection
ENGLISH
ENG
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with a
component cable as shown on the following
illustration. To transmit an audio signal, connect an
optional audio cable.
AV connection (Only 47WV30BR
and 47WV30MS)
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the RCA
cable as shown on the following illustration. To
transmit an audio signal, connect an optional audio
cable.
Peripheral
Peripheral
AV (CVBS)
(not included)
(not included)
(not included)
(not included)
COMPONENT IN
COMPONENT IN
VIDEO
AV IN
AUIDO
Back of the Monitor Set
VIDEO
AV IN
AUIDO
Back of the Monitor Set
NOTE
y
AV(CVBS) can be supported only in 47WV30BR and 47WV30MS models.
NOTE
For AV (CVBS) connection, the red and blue
y
cables in a shared interface are not in use.
y
AV(CVBS) can be supported only in 47WV30BR and 47WV30MS models.
MAKING CONNECTIONS
Connecting to the LAN
Connecting to a USB
Connect the LAN cable.
A Using a router(Switching Hub)
Switching Hub
or
Product
B Using the Internet.
PC
ENG
ENGLISH
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files. "Connecting USB storage devices" on See
p.30 and “Browsing files” on See p.31
LAN connection
LAN
57
58
MAKING CONNECTIONS
Daisy Chain Monitors
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
      ‹     }`Œ 
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
RGB Cable
15-pin D-Sub Signal Cable
(Max 3m)
Set 1
Set 2
Set 3
Set 4
DVI Cable
DVI Cable
(Max 3m)
DVI-OUT
DVI-IN
Set 1
DVI-OUT
Set 2
DVI-IN
DVI-OUT
DVI-IN
Set 3
NOTE
y
"Input signal may be degraded or lost when multiple monitors are connected. For DVI, in general, up
to 12 monitors can be connected via the DVI Out port (at the recommended resolution) if the signal
is stable and there is no cable loss. (If you want to connect more than this number of monitors, we
recommended that you use a distributor.)
y
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
HDCP-encrypted content. (The DVI Out port does not support HDCP).
y
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
booster or DVI (RGB) optical cable.
y
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
the DVI Out port"
TROUBLESHOOTING
59
TROUBLESHOOTING
Problem
Is the product power cord
connected?
Power is on, power indicator
is blue but the screen appears
extremely dark.
Does the 'Invalid Format'
message appear?
Does the 'No Signal' message
appear?
Resolution
y See if the power cord is properly connected to the outlet.
y Adjust brightness and contrast again.
y Backlight may need repair.
y The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution (47WV30MS,47WV30BR)
RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
* Maximum resolution (47WV30BS,47WV30-BAAM,47WV30-BAAL)
RGB : 1366 X 768 @ 60 Hz
HDMI/DVI : 1366 X 768 @ 60 Hz
y The signal cable between PC and product is not connected. Check
the signal cable.
y Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
y See if the plug&play function is supported by referring to the video
card user manual.
ENG
ENGLISH
No image is displayed
60
TROUBLESHOOTING
The screen image looks abnormal.
ENGLISH
ENG
Problem
Resolution
y D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
y D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the y D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
y The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
Is the screen position wrong?
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
y If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the ISM mode.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
Select the appropriate equalize sound.
Adjust the volume.
TROUBLESHOOTING
61
Screen color is abnormal.
Resolution
Screen color is unstable or
mono-colored.
y Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
y Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
y Is the sleep timer set?
y Check the power control settings. Power interrupted.
Remote controller doesn’t work. y Remote controller will not work in case SET ID and Picture ID are
different.
The power suddenly turned off.
ENG
ENGLISH
Problem
Screen has poor color resolution y Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
62
SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
LCD Panel
Video Signal
Screen Type
1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.8 mm
Pixel Pitch
0.5415 mm (H) x 0.5415 mm (V)
Max. Resolution
(47WV30MS,47WV30BR)
RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Max. Resolution
(47WV30BS,47WV30-BAAM,
47WV30-BAAL)
Recommended Resolution
RGB : 1366 X 768 @ 60 Hz
HDMI/DVI : 1366 X 768 @ 60 Hz
- It may not be supported depending on the OS or video card type.
RGB : 1366 X 768 @ 60 Hz
HDMI/DVI : 1366 X 768 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
RGB : 30 kHz to 68 kHz
HDMI/DVI : 30kHz to 68 kHz
Vertical Frequency
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 63 Hz
Synchronization Type
Power
Separate Sync, Composite Sync, Digital, SOG
15-pin D-Sub type(RGB), Component, HDMI/DVI(digital),
AV(CVBS), RS-232C, LAN, USB
* AV(CVBS) can be supported only in 47WV30BR and
47WV30MS models.
Input Connector
Rated Voltage
AC 100-240 V~ 50 / 60 Hz 2.2 A
Power Consumption
On Mode : 220 W Max.
•  \™@‘Œ
Dimensions
(Width x Height x
Depth) / Weight
* Wall Bracket available VESA dimensions:
800 mm x 400 mm
1047 mm x 592 mm x 91.1 mm / 29 kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
* Applicable only for models that support the speakers
Audio
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
š›
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
63
PC supported mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
*1
720 x 400
31.468
70.8
*2
640 x 480
31.469
59.94
*3
800 x 600
37.879
60.317
832 x 624
49.725
74.55
*5
1024 x 768
48.363
60
*6
1280 x 720
44.772
59.855
*7
1366 x 768
47.71
59.79
*8
1280 x 1024
63.981
60.02
*9
1360 X 768
47.72
59.799
*10
1920 X 1080
67.5
60 (Only 47WV30BR, 47WV30MS)
ENG
ENGLISH
Resolution
1 to 10: RGB Mode
* : HDMI/DVI mode
DTV Mode
Resolution
AV/Component
HDMI(DTV)
480i
576i
480p
576p
720p
1080i
1080p
64
RS-232 CONTROL
RS-232 CONTROL
ENGLISH
ENG
You can control several products at a time by connecting them to a single PC.
y
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
y
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
y
product on/off, select an input source or adjust the OSD menu from your PC. This monitor features
two RS-232 ports. One input and one output. This allows you to daisy-chain monitors without having
to use a splitter box.
RS-232C Cable
PC
Set 1
NOTE
Set 2
Set 3
Set 4
Use RS-232C cables as shown in the picture.
y
If a cable bigger than the ones shown in the picture is used
y
in the connector, the connection may not be flawless due to
interference between the cables.
Pin 1 of RS-232C Out should be connected with Pin 4 of RSy
232C In.
15 mm or
less
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
PC
Set
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
y
Data Length : 8 bit
y
Parity Bit : None
y
Stop Bit : 1bit
y
Flow Control : None
y
Communication Code : ASCII code
y
Use a crossed (reverse) cable
y
RS-232 CONTROL
65
Command Reference List
DATA
(Hexadecimal)
01
Power
00H to 01H
02
Input Select
Refer to ‘02. Input Select’
03
Aspect Ratio
Refer to ‘03. Aspect Ratio’
04
Energy Saving
Refer to ‘04. Energy Saving’
05
Picture mode
00H to 04H
06
Contrast
00H to 64H
07
Brightness
00H to 64H
08
Sharpness
00H to 64H
09
Color
00H to 64H
10
Tint
00H to 64H
11
Color Temperature
00H to 64H
12
H Position
00H to 64H
13
V Position
23H to 41H
14
H Size
00H to 64H
15
Auto configuration
01H
16
Balance
00H to 64H
17
Sound mode
01H to 05H
18
Treble
00H to 64H
19
Bass
00H to 64H
20
Speaker
00H to 01H
21
Volume Mute
00H to 01H
22
Volume Control
00H to 64H
23
Time 1(Years/ Months/ Days)
Refer to ’23. Time 1’
24
Time 2(Hours/ Minutes/Seconds)
Refer to ’24. Time 2’
25
Off Timer(Repeat mode/ Time)
Refer to ‘25. Off Timer’
26
On Timer(Repeat Mode/ Time)
Refer to ’26. On Timer’
27
On Timer Input
Refer to ’27. On Timer Input’
28
Sleep Time
00H to 08H
29
Power On Delay
00H to 64H
30
Automatic Standby
00H to 01H
31
Auto Off
00H to 01H
32
Language
00H to 0AH
33
ISM mode
Refer to ‘33. ISM Method’
34
DPM Select
00H to 01H
35
Fail Over Select
00H to 02H
36
Fail Over Input Select
Refer to ’36. Fail Over Input Select’
37
Reset
00H to 03H
38
Tile Mode
Refer to ’38. Tile Mode’
39
Tile Mode Check
FFH
40
Tile ID
Refer to ’40. Tile ID’
ENG
ENGLISH
COMMAND
66
RS-232 CONTROL
COMMAND
ENGLISH
ENG
DATA
(Hexadecimal)
41
Tile H Position
42
Tile V Position
00H to 64H
23H to 41H
43
Tile H Size
00H to 64H
44
Natural Mode (In Tile mode)
00H to 01H
45
FAN Control
00H to 02H
46
FAN Fault check
FFH
47
Temperature Value
FFH
48
Key
Refer to ‘48. Key’
49
OSD Select
00H to 01H
50
Elapsed time return
FFH
51
Serial No. Check
FFH
52
S/W Version
FFH
53
White Balance Red Gain
00H to FEH
54
White Balance Green Gain
00H to FEH
55
White Balance Blue Gain
00H to FEH
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
y
not executed and treated as NG.
RS-232 CONTROL
67
Transmission / Receiving Protocol
ENG
ENGLISH
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command1]: First command to control the set.
y
[Command2]: Second Command to control the set.
y
[Set ID]: Set ID wants to communicate with the set. Command for test is 00.
y
[DATA]: Information passed to the set.
y
[Cr]: Carriage Return. ASCII code ‘0x0D’.
y
[ ]: White Space. ASCII code ‘0x20’.
y
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data
y
feedback presents status about each function.
Note: In this mode, display will send the acknowledgement after power on processing completion.
y
There might be a time delay between command and acknowledgement.
Refer to ‘Real data mapping’ for hexadecimal data to decimal data.
y
No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to
y
‘00’(=0x00).
Supports
Model
47WV30-BAAL
47WV30BS
47WV30-BAAM
47WV30BR
47WV30MS
Data
20H
40H
90H
This table displays the models which the command supports(O: Supports, X: Not supports)
y
The command does not have this table supports all displays.
y
68
RS-232 CONTROL
01. Power (Command: k a)
- To control power On/Off the display.
03. Aspect Ratio (Command: k c)
- To adjust the screen format.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
00: Power Off
01: Power On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Note: In this mode, display will send the
acknowledgement after power on processing
completion. There might be a time delay between
command and acknowledgement.
Data
01: 4:3
02: 16:9
04: Zoom
09: Just Scan(720p or higher)/ 1:1
10~1F: Cinema Zoom 1~16
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
04. Energy Saving (Command: j q)
- To control the energy saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
05. Screen Off
02. Input Select (Command: x b)
- To select input source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
Data
20: AV
40: Component
60: RGB PC
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(DTV)
A0: HDMI(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Comman : d x)
- To select the picture mode.
* Use this feature depending on your model
Supports
Model
Data
20H
40H
60H
70H
80H
90H
A0H
47WV30BS
47WV30-BAAM
47WV30-BAAL
47WV30BR
47WV30MS
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
06. Contrast (Command: k g)
- To adjust screen contrast.
Data
00~64: Contrast 0~100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
- To adjust screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
00~64: Brightness 0~100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
- To adjust screen sharpness.
* Only available for AV/ Component input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
00~64: Sharpness 0~100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
00~64: Color 0~100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
- To adjust screen tint.
* Only available for AV/ Component input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
00~64: Tint 0~100 (R50 ~ G50)
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
- To adjust color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00~64: Warm 50~Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
09. Color (Command: k i)
- To adjust screen color.
* Only available for AV/ Component input.
69
70
RS-232 CONTROL
ENGLISH
ENG
12. H Position (Command: f q)
- To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data
00~64: Left 50 ~ Right 50
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
13. V Position (Command: f r)
- To set the Vertical position.
* Only available for Tile Off mode.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data
23~41: Bottom 15~Top 15
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
- To set the Horizontal size.
* Only available for Tile Off mode.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Size -50 ~ +50
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
- To adjust picture position and minimize image
shaking automatically.
* Only available for RGB input.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01: Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
- To adjust sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00~64: Left 50~Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Comman : d y)
- To select the sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
18. Treble (Command: k r)
- To adjust treble.
Data
00~64: Treble 0~100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
19. Bass (Command: k s)
- To adjust bass.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Bass 0~100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
- To select speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Speaker Off
01. Speaker On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
21. Volume Mute (Command: k e)
- To select volume mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Volume mute on(volume off)
01: Volume mute off(volume on)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
- To adjust volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
00~64: Volume 0~100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
- To set the Time 1(Year/ Month/ Day values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00~14: 2010 ~ 2030
Data2
01~0C: January ~ December
Data3
01~1F: 1 ~ 31
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
71
72
RS-232 CONTROL
24. Time 2(Hour/ Minute/ Second) (Command: f x)
- To set the Time 2(Hour/ Minute/ S) values.
ENGLISH
ENG
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00~17: 00 ~ 23 hours
Data2
01~3B: 00 ~ 59 minutes
Data3
01~3B: 00 ~ 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
* This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
26. On Timer(Repeat Mode/ Time) (Command: f d)
- To set the On Timer(Repeat Mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
00~17: 00 ~ 23 Hours
Data3
00~3B: 00 ~ 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
* On Timer Input command should be executed
followed just after executing this command to set On
Timer schedule properly.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
25. Off Timer(Repeat Mode/ Time) (Command: f e)
- To set the Off Timer(Repeat Mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
00~17: 00 ~ 23 Hours
Data3
00~3B: 00 ~ 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
RS-232 CONTROL
27. On Timer Input (Command: f u)
- To set the On Timer Input function.
73
28. Sleep Time (Command: f f)
- To set sleep time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
20: AV
40: Component
60. RGB
70: DVI
90: HDMI
* Check if Time1, Time2, and On Timer(Repeat
Mode/ Time) functions have been set before setting
this function.
* On Timer(Repeat Mode/ Time) command should
be executed in advance this command to set On
Timer schedule properly.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: 10min.
02: 20min.
03: 30min.
04: 60min.
05: 90min.
06: 120min.
07: 180min.
08: 240min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
Supports
Model
Data
20H
40H
60H
70H
90H
47WV30BS
47WV30-BAAM
47WV30-BAAL
47WV30BR
47WV30MS
29. Power On Delay (Command: f h)
- To set the schedule delay when the power is turned
on(unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data
00~64: 0~100sec.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
- To set the Automatic Standby function
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 4 Hours Off
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
74
RS-232 CONTROL
31. Auto Off (Command: f g)
- To set the Auto Off function
ENGLISH
ENG
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Auto Off Off
01: Auto Off On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
34. DPM Select (Command: f j)
- To select DPM(Display Power Management) to
save evergy.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data
00: DPM Off
01: DPM On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
- To set language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Korean
01: Chinese
02: Japanese
03: English
04: French
05: German
06: Italian
07: Portuguese
08: Spanish(EU)
09: Russian
0A: Persian
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. ISM Method (Command: j p)
- To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. Fail Over Select (Command: m i)
- To select Fail Over mode.
* 47WV30-BAAL does not support Fail Over Select
command.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
60: RGB
70: DVI-D*
90: HDMI*
* Use 0x70 as data for DVI-D input, 0x90 as data for
HDMI input, regardless their input lables.
38. Tile mode (Command: d d)
- To select a Tile Mode Off/ On and Tile Row/
Column size.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
00 ~ FF: 1st byte - Tile Column value
2nd byte - Tile Row value
*00, 01, 10, 11 means Tile Mode Off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data
1~3(Priority 1~3)
60: RGB
70: DVI-D**
90: HDMI**
** Returns 0x70 as Data for DVI-D port, 0x90 as
Data for HDMI port, regardless their input labels.
39. Tile Mode Check (Command: d z)
- To check Tile Mode status.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
37. Reset (Command: f k)
- To execute the Picture, Screen and Factory reset
function,
Data1
00: Tile Mode Off
01: Tile Mode On
Data2
01~0F: Tile Column Value
Data3
01~0F: Tile Row Value
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
40. Tile ID (Command: d i)
- To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
01 ~ E1:Tile ID 01 ~ 225**
FF: Read Tile ID
** Data could not be set over (Tile Row) x (Tile
Column)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
36. Fail Over Input Select (Command: m j)
- To select fail over mode.
* Only available in Fail Over manual mode.
* 47WV30-BAAL does not support Fail Over Select
command.
75
76
RS-232 CONTROL
ENGLISH
ENG
41. Tile H Position (Command: d e)
- To set the Horizontal position
* Only available when Tile Mode On.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data
00~64: -50 ~ 50
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
42. Tile V Position (Command: d f)
- To set the Vertical Position.
* Only available when Tile Mode On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data
23~41: -15 ~ 15 (for RGB)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
43. Tile H Size (Command: d g)
- To set the Horizontal size.
* Only available when Tile Mode On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data
00~64: -50 ~ 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
44. Natural Mode (in Tile Mode) (Comman : d j)
- To assign the Tile Natural mode for Tiling function.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. FAN Control (Command: d o)
- To set Fan control on/off.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data
00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
46. FAN Fault Check (Command: d w)
- To set Fan control on/off.
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data
FF: Data should be always ff in hexadecimal.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
IR CODES
47. Temperature Value (Command: d n)
- To read the inside temperature of the display.
Data
FF: Data should be always ff in hexadecimal.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
50. Elapsed Time Return (Command: d l)
- To read the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Data should be always ff in hexadecimal.
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
48. Key (Command: m c)
- To send IR remote control code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
51. Serial No. Check (Command: f y)
- To read the serial numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
FF: Data should be always ff in hexadecimal.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
When display is in the standby mode, display will
turn on by Power button of remote control only.
49. OSD Select (Command: k l)
- To select OSD(On Screen Display) on/off
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: OSD off
01: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
52. S/W Version (Command: f z)
- To read the software version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data
FF: Data should be always ff in hexadecimal.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
77
78
IR CODES
53. White Balance Red Gain (Command: j m)
- To adjust white balance red gain.
ENGLISH
ENG
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00~FE: Red gain 0~254
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
54. White Balance Green Gain (Command: j n)
- To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00~FE: Green gain 0~254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
55. White Balance Blue Gain (Command: j o)
- To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00~FE: Blue gain 0~254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
IR CODES
IR CODE (Hex)
Function
79
Remark
POWER
Remocon Botton
C4
MONITOR ON
Remocon Botton
C5
MONITOR OFF
Remocon Botton
95
Evergy Saving
Remocon Botton
0B
INPUT
Remocon Botton
10
Number 0
Remocon Botton
11
Number 1
Remocon Botton
12
Number 2
Remocon Botton
13
Number 3
Remocon Botton
14
Number 4
Remocon Botton
15
Number 5
Remocon Botton
16
Number 6
Remocon Botton
17
Number 7
Remocon Botton
18
Number 8
Remocon Botton
19
Number 9
Remocon Botton
02
VOL+
Remocon Botton
03
VOL-
Remocon Botton
E0
BRIGHTNESS 䯁 (Page Up)
Remocon Botton
E1
BRIGHTNESS 䯂 (Page Down)
Remocon Botton
79
ARC (MARK)
Remocon Botton
4D
PSM
Remocon Botton
09
MUTE
Remocon Botton
43
MENU
Remocon Botton
99
AUTO
Remocon Botton
40
䯁
Remocon Botton
41
䯂
Remocon Botton
06
Remocon Botton
07
Remocon Botton
44
OK
Remocon Botton
28
BACK
Remocon Botton
7B
TILE
Remocon Botton
5B
EXIT
Remocon Botton
72
ID ON(Red)
Remocon Botton
71
ID OFF(Green)
Remocon Botton
63
Yellow
Remocon Botton
61
Blue
Remocon Botton
B1
Remocon Botton
B0
Remocon Botton
BA
ll
Remocon Botton
8F
}}
Remocon Botton
8E
||
Remocon Botton
ENG
ENGLISH
08
NOTE
y
ENERGY STAR(EPA) can not be supported
in 47WV30-BAAL model.
ENERGY STAR(EPA)
support
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
47WV30MS
47WV30BR
47WV30BS
47WV30-BAAM
47WV30-BAAL
Temporary noise is normal when powering ON or
OFF this device.
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matĂŠriel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the “CE” Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
• EN 55022
; Radio Frequency Interference
• EN 55024
; Electromagnetic Immunity
• EN 61000-3-2
; Power Line Harmonics
• EN 61000-3-3
; Voltage Fluctuations
• EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numĂŠrique de la classe B
01
Regulatory Information cont.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Development’s website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCO’99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCO’99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCO’99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCO’99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCO’99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
•
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
• The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCO’99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCO’03 (TCO’03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCO’03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
• Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
• Energy-saving mode after a certain time – beneficial
both for the user and the environment
• Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
• Electromagnetic fields
03
Regulatory Information cont.
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einfließen lassen. Zusätzliche
Informationen über unsere ‘grüne’ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our ‘green’ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection del’environnement
LGE. a publié sa 'Déclaration en faveur d’un
environnement plus propre' en 1994 et celle-ci est restĂŠe,
depuis lors, un principe directeur de notre entreprise.
Cette dĂŠclaration a servi de base Ă  notre rĂŠflexion et nous
a permis de prendre en compte Ă  la fois les aspects
ĂŠconomiques et sociaux de nos activitĂŠs, tout en
respectant l’environnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkĂźndete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung fßr eine sauberere
Umwelt). Seitdem dient dieses Ideal als fĂźhrendes Prinzip
des Unternehmens. Diese Erklärung war die Basis fßr die
DurchfĂźhrung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Überlegungen mit einbezogen wurden.
Wir fÜrdern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezĂźglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activitĂŠs en faveur de la
préservation de l’environnement et c’est dans cet esprit
que nous dĂŠveloppons nos produits : nous rĂŠduisons au
minimum les matières dangereuses qui entrent dans leur
composition et l’on ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui prĂŠsentent
un risque pour l’environnement. Il est donc important que
celui-ci soit recyclÊ après usage.
LGE. traite les moniteurs en fin de cycle conformĂŠment Ă 
une mĂŠthode de recyclage respectueuse de
l’environnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites rĂŠpartis dans le monde
entier. De nombreux composants sont rĂŠutilisĂŠs et
recyclÊs, et les matières dangereuses, ainsi que les
mĂŠtaux lourds, sont traitĂŠs selon un procĂŠdĂŠ ĂŠcologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un l’un de nos représentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
kĂśnnen. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er außer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
RĂźcknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr Ăźber unser Recyclingprogramm erfahren
mÜchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rôle de notre entreprise dans l’amélioration de
l’environnement. Pour plus de renseignements sur notre
politique “verte”, rendez visite à notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
econĂłmicos y medioambientales.
Informazioni per la tutela dell’ambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente piĂš pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attivitĂ  a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attivitĂ  a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dell’ambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservaciĂłn
del medio ambiente y desarrollamos nuestros productos
especĂ­ficamente para que se ajusten a la filosofĂ­a que
protege el entorno.
Reducimos al mĂĄximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
InformaciĂłn para el reciclaje
Este monitor puede contener piezas que entraĂąen riesgos
medioambientales. Es importante reciclar este monitor
despuĂŠs de su utilizaciĂłn.
LGE. trata todos los monitores usados siguiendo un
mĂŠtodo de reciclaje que no daĂąa al entorno. Contamos
con diversos sistemas de recuperaciĂłn y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias daĂąinas y los metales pesados se tratan
siguiendo un mĂŠtodo que no perjudique al medio
ambiente. Si desea obtener mĂĄs informaciĂłn acerca del
programa de reciclaje, pĂłngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. È
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dell’ambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visiĂłn y nuestras polĂ­ticas en un mundo
mĂĄs limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evoluciĂłn como empresa.
Visite nuestra pĂĄgina Web para obtener mĂĄs informaciĂłn
sobre nuestras polĂ­ticas ecolĂłgicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo piĂš pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica “verde”.
http://www.lge.com/about/environment/html/Recycling.jsp
PortuguĂŞs
Informaçþes relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde entĂŁo
como um princípio administrativo de orientação. A
Declaração Ê a base que nos tem permitido realizar
atividades favoråveis ao ambiente com consideração
atenta aos aspectos econĂ´micos, ambientais e sociais.
EspanĂľl
InformaciĂłn para la conservaciĂłn
medioambiental
LGE. presentĂł la 'DeclaraciĂłn para un entorno mĂĄs limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La DeclaraciĂłn
es la base que nos ha permitido llevar a cabo tareas que
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
Regulatory Information cont.
especificamente o conceito de favorĂĄvel ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, nĂŁo hĂĄ cĂĄdmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informaçþes relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. É importante que ele seja reciclado
apĂłs o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados atravĂŠs
de um mĂŠtodo de reciclagem agradĂĄvel ao ambiente. HĂĄ
vårios sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarĂŁo por tratamento atravĂŠs de um mĂŠtodo
favorĂĄvel ao ambiente.
Para obter mais informaçþes sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visĂŁo e nossas polĂ­ticas relacionadas a
um mundo mais limpo selecionando a questĂŁo do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informaçþes
sobre nossas polĂ­ticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚
Nederlands
¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡
'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',
ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ
ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË
Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘ËÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ
‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë
ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂ
ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ
‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò
ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË.
Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı
‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı
ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚
›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,
ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.
06
Regulatory Information cont.
ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂ
ËÒÔÓθÁÓ‚‡Ìˡ.
KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚Â
ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó
ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ
‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡
ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚
·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ
‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚
·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË
ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ
ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í
ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ
ÍÓÔÓ‡ˆËË LG.
Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ
·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ
ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛
Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚
ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:
http://www.lge.com/about/environment/html/Recycling.jsp
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
07
Regulatory Information cont.
WEEE
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autoritĂ  locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni piĂš dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
English
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en Üverkryssad
soptunna pü hjul sitter pü en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bĂśr
kasseras via andra vägar än de som finns fÜr
hushüllsavfall, helst via fÜr ändamület avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat pü rätt sätt
sĂĽ bidrar du till att fĂśrhindra negativa
konsekvenser fÜr miljÜn och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan fĂĽr av kommunen,
renhüllningsverket eller den butik där du kÜpte
produkten.
French
Élimination de votre ancien appareil
1.Ce symbole, reprĂŠsentant une poubelle sur
roulettes barrĂŠe d'une croix, signifie que le
produit est couvert par la directive europĂŠenne
2002/96/EC.
2.Les ĂŠlĂŠments ĂŠlectriques et ĂŠlectroniques
doivent ĂŞtre jetĂŠs sĂŠparĂŠment, dans les videordures prĂŠvus Ă  cet effet par votre municipalitĂŠ.
3.Une ĂŠlimination conforme aux instructions aidera
Ă  rĂŠduire les consĂŠquences nĂŠgatives et risques
ĂŠventuels pour l'environnement et la santĂŠ
humaine.
4.Pour plus d'information concernant l'ĂŠlimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures mÊnagères ou
encore la magasin oĂš vous avez achetĂŠ ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
08
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger pü miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fĂĽs ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkÜ- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristÜÜn ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Greek
∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜
1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜
‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ
ηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.
2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ
ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο
ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓ
ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜
¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ
ÙÔÈΤ˜ ·Ú¯¤˜.
3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·
‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ
ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.
4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ
·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂ
ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ
·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·ÙÂ ÙÔ
ÚÔ˚fiÓ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte mßssen
getrennt vom HausmĂźll Ăźber dafĂźr staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäßen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persÜnlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
CĂłmo deshacerse de aparatos elĂŠctricos y
electrĂłnicos viejos
1.Si en un producto aparece el sĂ­mbolo de un contenedor
de basura tachado, significa que ĂŠste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos elĂŠctricos o electrĂłnicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a travĂŠs de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pĂşblica.
4.Para obtener mĂĄs informaciĂłn sobre cĂłmo deshacerse de
sus aparatos elĂŠctricos y electrĂłnicos viejos, pĂłngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquiriĂł el producto.
Danish
SĂĽdan smider du dit gamle apparat ud
1.NĂĽr der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjĂŚlp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Regulatory Information cont.
Portuguese
Hungarian
Slovak
Polish
Czech
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : ko-KR
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 최선미
Title                           : EMISSION TEST REPORT
Create Date                     : 2012:04:03 13:29:15+09:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2012:04:03 13:36:10+09:00
Metadata Date                   : 2012:04:03 13:36:10+09:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:84562585-0e6f-4200-afbf-70e9c2b2c14e
Instance ID                     : uuid:30a9c5d7-4d2b-49aa-b917-525f9a512550
Page Count                      : 92
Author                          : 최선미

EXIF Metadata provided by EXIF.tools