LG Electronics USA 50PC3DXUD Plasma Display Panel User Manual 38289U0527Aen Rev06 ING

LG Electronics USA Plasma Display Panel 38289U0527Aen Rev06 ING

Contents

User Manual 1

Please read this manual carefully before operating your set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.ENERGYSTAR is a set of power-savingguidelines issued by the U.S.Environmental Protection Agency(EPA).As an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets the ENER-GY STAR guidelines forenergy efficiency.P/NO : 38289U0527A (0607-REV06)Printed in KoreaOWNER’S MANUALLCD TVMODELS: 32LC2D32LC2DC37LC2D42LC2DPLASMA TVMODELS: 42PC3D 42PC1DVH42PC3DC 42PC3DH42PC3DV 42PC3DVA50PC3D 50PC3DH50PC3DXInternet Home Page : http://www.lge.comhttp://www.lg.cahttp://www.lgcommercial.com
2WarningWARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user tothe presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance (servicing) instructions in the literature accompanying the appli-ance.NOTE TO CABLE/TV INSTALLER:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National ElectricCode (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building, as close to the point of the cable entry as prac-tical.REGULATORY INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment. CAUTION:Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation.Unauthorized modification could void the user’s authority to operate this product.U.S.A. only -----------------------------------------------COMPLIANCE:The responsible party for this product’s compliance is:LG Electronics U.S.A., Inc.1000 Sylvan Avenue, Englewood Cliffs, NJ 07632Phone: 1-800-243-0000http://www.lgusa.com---------------------------------------------------------------CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENWWarningarning
3Safety InstructionsWARNING :To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on theapparatus.IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings. 4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install inaccordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators,heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized orgrounding type plug. A polarized plug has two bladeswith one wider than the other. A grounding type plug hastwo blades and a third grounding prong. The wide bladeor the third prong is provided for your safety. When theprovided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on orpinched particularly at plugs, convenience recepta-cles, and the point where they exit from the apparatus.11. Only use the attachments / accessories specified bythe manufacturer.Safety InstructionsSafety InstructionsOwner's Manual
4Safety Instructions12. Use only with a cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the appa-ratus. When a cart is used, use caution when movingthe cart / apparatus combination to avoid injury fromtip-over.13. Unplug this apparatus during lightning storms or whenunused for long periods of time.14. Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normal-ly, or has been dropped.15. DISCONNECTING DEVICE FROM MAINS- Mains plug is the disconnecting device. The plugmust remain readily operable.On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury.b. Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations of your local authority.Note- If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is noth-ing wrong with TV.- Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they haveno adverse effect on the monitor's performance.- Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce sometemporary distortion effects on the screen.CAUTION concerning the Power CordMost appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only thatappliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords,or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discon-tinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, orwalked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.For LCD TV
5ContentsContentsContentsIntroductionInstallationOperation32 Turning on the TV32 Volume Adjustment32 Channel Selection32 On Screen Menus Language Selection33 On Screen Menus Selection and Adjustment34 EZ Scan (Channel Search)34 Manual Scan35 Channel Edit36 DTV Signal Strength36 Input Source37 Input Label38 EZ Picture38 APM (Adaptive Picture Mode)39 Manual Picture Control (EZ Picture-Custom option)39 Color Temperature Control39 Video Reset40 Audio Language40 EZ SoundRite41 EZ Sound41 Manual Sound Control (EZ Sound-Custom option)42 Stereo/SAP Broadcasts Setup42 Front Surround43 TV Speakers On/Off Setup43 BBE2 Warnings3~4 Safety Instructions7 Accessories8 Controls (Model Name: 32/37/42LC2D**) 8 Swivel Stand (42LC2D** only) 9 Connection Options (Model Name: 32/37/42LC2D**) 10 Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**) 11 Connection Options (Model Name: 42PC1D**/42PC3D**/50PC3D**) 12~16 Remote Control Key Functions17 Various Installation18~20 Basic Connection21 Antenna or Cable Connection22~23 VCR Setup23 External AV Source Setup24~25 DVD Setup26~27 HDSTB Setup28 Monitor Out Setup28 Digital Audio Output29~31 PC SetupSetup MenuOptionsVideo MenuOptionsAudio MenuOptionsBasic operationExternalEquipmentConnections
6ContentsReference44 Auto Clock Setup44 Manual Clock Setup45 On/Off Timer Setup45 Sleep Timer46 Auto Off47 Aspect Ratio Control48 Cinema 3:2 Mode Setup48 Caption49 Caption/Text50 Caption Option50 Low Power (42PC1D**/42PC3D**/50PC3D** only)51 ISM (Image Sticking Minimization) Method (42PC1D**/42PC3D**/50PC3D** only)52~53 Parental Lock Setup54~59 External Control Device Setup60~61 IR Codes62 Programming the Remote63~64 Programming Codes65~66 Troubleshooting Checklist66 Maintenance67~68 Product SpecificationsOption MenuFeaturesLock Menu OptionsOperationTime MenuOptions
7IntroductionAccessoriesAccessoriesIntroductionIntroductionOwner’s Manual75ΩRound CablePower CordEnsure that the following accessories are included with your TV. If any accessory is missing, please contact thedealer where you purchased the product.1.5V1.5VVOLFLASHBKCH1 2 3 456 7809 APMADJUSTSAPEZ SOUNDEZ PICFREEZEDAY -GUIDMENUMUTEPAGEPAGEFAVEXITTIMERCCINFOENTERVOLCHPOWER123 456 7809 MENUMUTE FAVDAY -GUIDEDAY+RATIOVCRTVDVDENTERAPMADJUSTSAPEZ SOUNDEZ PICFREEZEFLASHBKPAGEPAGEEXITTIMERCCINFOAUDIOCABLESTBMODETV INPUT INPUTRemote Control /BatteriesD-sub 15 pin cable2-eye-bolts 2-TV brackets2-Wall brackets2-TV Bracket BoltsFor 32/37/42LC2D**For 42PC1D**, 42PC3D**, 50PC3D**Carefully place the product screen side down on acushioned surface that will protect product andscreen from damage.1Place the hook of the stand in the back of theproduct as shown.2Install the 4 bolts provided securely, in the back of theproduct.3Stand Installation for 32LC2D**Twister HolderArrange the wires with the twister holder.4-bolts for standassemblySee below for detailinformation.32LC2D** only42LC2D** onlyCableManagement(Refer p.18)Polishing ClothPolish the TV withthe cloth.42PC1D**, 42PC3D** only2-Wall brackets2-bolts(Refer p.19)Polishing Cloth* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exteriorif there is stain or fingerprint on surface of the exterior.* Do not wipe roughly when removing stain. Please be cautions of that excessive power maycause scratch or discoloration.
8IntroductionControls Controls (Model Name: 32/37/42LC2D**) (Model Name: 32/37/42LC2D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV.RCHCHVOLVOLENTERENTERMENUMENUINPUTINPUTCHANNEL (D, E)ButtonsVOLUME (F,G)ButtonsENTER ButtonMENU ButtonINPUT Button(Power) ButtonRemote Control SensorPower/Standby Indicator• illuminates red in standby mode.• illuminates green when the set isswitched on.- The TV can be conveniently swivelled on its stand 30°to the left or right to provide the optimum viewing angle.Swivel Stand (42LC2D** only)R30°30°
9IntroductionConnection Options (Model Name: 32/37/42LC2D**)Connection Options (Model Name: 32/37/42LC2D**)AC INAV IN 2AV IN 2L/L/MONOMONORAUDIOAUDIOS-VIDEOS-VIDEOVIDEOVIDEOAC INL/L/MONOMONORAUDIOAUDIOS-VIDEOS-VIDEOVIDEOVIDEOAV IN 2AV IN 2HDMI/DVI INHDMI/DVI INDIGITAL AUDIO DIGITAL AUDIO OUTOUTOPTICALPTICALRS-232C INRS-232C IN(CONTROL(CONTROL & SERVICE)SERVICE)VIDEOVIDEOAUDIOAUDIOMONO( )VIDEOVIDEOAUDIOAUDIOCOMPONENT INCOMPONENT INS-VIDEOS-VIDEOAV IN 1AV IN 1AV OUTAV OUTANTENNAANTENNAININCABLECABLEININRGB (PCRGB (PC/DTV)DTV)RGB INRGB INAUDIO (RGB/DVI)AUDIO (RGB/DVI)REMOTEREMOTECONTROL INCONTROL INAUDIO InputS-VIDEO Input37/42LC2D** 32LC2D**VIDEO InputDIGITAL AUDIO OUTOPTICALAV OUTAV IN1COMPONENT IN 1/2HDMI / DVI INANTENNA INCABLE INAUDIO (RGB/DVI)RGB (PC/DTV)AC INRS-232C INPUT(Control &Service)REMOTE CONTROL Port- Here shown may be somewhat different from your TV.
10IntroductionControls Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**)(Model Name: 42PC1D**/42PC3D**/50PC3D**)- This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV.CHVOLENTERMENUINPUTCHVOLENTERMENUINPUTCHANNEL (D, E)ButtonsVOLUME (F,G)ButtonsMENU ButtonENTER ButtonINPUT Button(Power) ButtonPower/Standby Indicator• illuminates red in standbymode.• illuminates green when the setis switched on.CHANNEL (D, E)ButtonsVOLUME (F,G)ButtonsENTER ButtonMENU ButtonINPUT ButtonRemote Control SensorPower/Standby Indicator• illuminates red in standby mode.• illuminates green when the set is switched on.(Power) Button42PC1D**42PC3D**/50PC3D**

Navigation menu