LG Electronics USA 55EA8800UA OLED TV MONITOR User Manual MFL67652661 en indd

LG Electronics USA OLED TV MONITOR MFL67652661 en indd

UserManual.wiki >

LG Electronics USA >

55EA8800UA User Manual >

Contents

User Manual 1

www.lg.comP/NO : MFL67693751 (1301-REV00)www.lge.co.krP/NO : MFL67652661 (1305-REV00)OWNER’S MANUALPlease read this manual carefully before operating your set and retain it for future reference.55EA8800

ENGLISH2IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSAlways comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. yDo not use this apparatus near water.Short-circuitBreakerPower Supply yClean only with a dry cloth.Short-circuitBreakerPower Supply yDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.Short-circuitBreakerPower Supply yDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.Short-circuitBreakerPower Supply yDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).Short-circuitBreakerPower Supply yDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.Short-circuitBreakerPower Supply Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENTO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.WARNING/CAUTION- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNINGIf you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTIONIf you ignore the caution message, you may be slightly injured or the product may be damaged. NOTEThe note helps you understand and use the product safely. Please read the note carefully before using the product.Short-circuitBreakerPower Supply WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ENGLISH3IMPORTANT SAFETY INSTRUCTIONS yProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Short-circuitBreakerPower Supply yOnly use attachments/accessories specified by the manufacturer.Short-circuitBreakerPower Supply yUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Short-circuitBreakerPower Supply yUnplug this apparatus during lightning storms or when unused for long periods of time.Short-circuitBreakerPower Supply yRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Short-circuitBreakerPower Supply yDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. yKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. yCAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.Short-circuitBreakerPower Supply yWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.Short-circuitBreakerPower Supply yDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).Short-circuitBreakerPower Supply

ENGLISH4IMPORTANT SAFETY INSTRUCTIONS yGrounding(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.Short-circuitBreakerPower Supply yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. yDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. yOutdoor Antenna Grounding(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70Short-circuitBreakerPower Supply Ground ClampGrounding Conductor (NEC Section 810-21)Antenna Lead in WireElectric Service EquipmentAntenna Discharge Unit (NEC Section 810-20)Ground ClampPower Service Grounding Electrode System (NEC Art 250, Part H)NEC: National Electrical Code yCleaningWhen cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. yMovingMake sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. yVentilationInstall your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. yIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center. yKeep the product away from direct sunlight. yNever touch this apparatus or antenna during a thunder or lightning storm. yWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. yDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen. yDisconnecting the Main Power The power outlet used with this device must remain easily accessible. yStore the accessories (battery, etc.) in a safe location out of the reach of children. yThis apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information. yDo not dispose of batteries in a fire. yDo not short circuit, disassemble or allow the batteries to overheat.

ENGLISH5IMPORTANT SAFETY INSTRUCTIONS yDot DefectThe Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. yGenerated Sound“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. yTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. yIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.Preventing “Image burn” or “Burn-in” on your TV screen yIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. yIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yAvoid displaying a fixed image on the TV screen for a long period of time (1 or more hours for OLED) to prevent image burn.For USA and CanadaFCC NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

ENGLISH6IMPORTANT SAFETY INSTRUCTIONSViewing 3D Imaging WARNINGViewing Environment yViewing Time- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.Those that have a photosensitive seizure or chronic illness ySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. yDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. y3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. yIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. yIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.Symptoms which require discontinuation or refraining from watching 3D contents yDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. yWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. CAUTIONViewing Environment yViewing Distance- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.Viewing Age yInfants / Children- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. yTeenagers- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired. yElderly- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.Cautions when using the 3D glasses yMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yUsing modified 3D glasses may cause eye strain or image distortion. yDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. yThe 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ENGLISH8TABLE OF CONTENTSTABLE OF CONTENTS2 IMPORTANT SAFETY INSTRUCTIONS6 Viewing 3D Imaging 7 LICENSES7 OPEN SOURCE SOFTWARE NOTICE8 TABLE OF CONTENTS9 INSTALLATION PROCEdURE9 ASSEMBLING ANd PREPARING9 Unpacking11 Optional Extras12 Parts and Buttons12 Channel13 Lifting and moving the TV14 Setting up the TV14 - Attaching the stand15 - Attaching the Cover15 - Mounting on a table16 - Tidying cables17 Using Video Call Camera18 - Preparing Video Call Camera20 MAKING CONNECTIONS20 Connecting to an antenna or cable21 Connecting to a HD receiver, DVD Player or VCR21 - HDMI Connection22 - DVI to HDMI Connection23 - Connecting to a mobile phone24 - Component Connection25 - Composite Connection26 Connecting a PC26 - HDMI Connection or DVI to HDMI Connection28 Connecting to an Audio System28 - Digital Optical Audio Connection29 Connecting Headphones 29 Connecting a USB Device30 MAGIC REMOTE CONTROL FUNCTIONS31 Registering Magic Remote Control31 How to use Magic Remote Control31 Precautions to Take when Using the Magic Remote Control32 WATCHING TV32 Turning the TV on for the first time33 USING THE USER GUIdE34 SPECIFICATIONS38 ExTERNAL CONTROL dEVICE SETUP39 MAINTENANCE39 Cleaning Your TV39 - Screen, frame, cabinet and stand39 - Power cord40 TROUBLESHOOTING yImage shown may differ from your TV. yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yThe available menus and options may differ from the input source or product model that you are using. yNew features may be added to this TV in the future. NOTE

ENGLISH9INSTALLATION PROCEDURE / ASSEMBLING AND PREPARINGINSTALLATION PROCEdURE1 Open the package and make sure all the accessories are included.2 Attach the stand to the TV set.3 Connect an external device to the TV set.4 Make sure the network connection is available.You can use the TV network functions only when the network connection is made.ASSEMBLING ANd PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. yDo not use any unapproved items to ensure the safety and product life span. yAny damages or injuries by using unapproved items are not covered by the warranty. ySome models appear to have a thin film on the screen. It is actually part of the screen, do not remove it. CAUTION yThe items supplied with your product may vary depending on the model. yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. yUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.BAAB *A 10 mm (0.39 inches) *B 18 mm (0.7 inches) NOTE

ENGLISH10 ASSEMBLING AND PREPARINGFREEZERATIOL/R SELECTENTERBACK EXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1 2 34 5 67 809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUTMagic Remote Control, Batteries (AA) (See p.30)Owner’s Manual Polishing clothUse this to remove dust from the cabinet.Stand Base(See p.14)Stand cover(See p.14)AV Cover(See p.15)Stand Screws 9 EA, M4 x 14(See p.14)Stand Screws 4 EA, M4 x 10(See p.14)Cable Holder(See p.16)Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country.Component Video Cable (See p.24)Composite Video Cable (See p.24, 25)Tag OnTag On AN-VC5** Video call camera(See p.17)

ENGLISH11ASSEMBLING AND PREPARINGOptional ExtrasOptional extras can be changed or modified for quality improvement without any notification.Contact your dealer for buying these items.These devices only work with certain models.The model name or design may be changed manufacturer’s circumstances or policies.AN-MR400Magic RemoteAG-F***Cinema 3D GlassesAG-F***DPDual Play GlassesTag OnLG Audio device Tag On AN-VC5** Video Call Camera