LG Electronics USA 55LN5790UI LED TV Monitor User Manual 2

LG Electronics USA LED TV Monitor Users Manual 2

Users Manual 2

ENGLISH11ASSEMBLING AND PREPARINGParts and ButtonsButton Description / (^ / v) Scrolls through the saved channels. / (+ / -) Adjusts the volume level. (OK ⊙)Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus. (INPUT ) Changes the input source. (ꔰ / I) Turns the power on or off.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.SETTINGSINPUTOKCOMPONENT IN / AV INVIDEO/ANTENNA IN /CABLE INPBPRYIN 1RAUDIOL/MONOOPTICALDIGITALAUDIO OUTButtonsScreenSpeakersRemote control Sensor andIntelligent Sensor1Power Indicator
ENGLISH12 ASSEMBLING AND PREPARINGLifting and moving the TVWhen moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Avoid touching the screen at all times, as this may result in damage to the screen. CAUTION It is recommended to move the TV in the box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect the power cord and all cables. When holding the TV, the screen should face away from you to avoid damage. Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. When transporting a large TV, there should be at least 2 people. When transporting the TV by hand, hold the TV as shown in the following illustration. When transporting the TV, do not expose the TV to jolts or excessive vibration. When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
ENGLISH13ASSEMBLING AND PREPARINGSetting up the TVThe TV can be mounted to a wall or the stand can be attached if the TV will be positioned on an entertainment center or stand.Attaching the standIf you are not mounting the TV to a wall, use the following instructions to attach the stand. When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not tighten the screws with too much force; otherwise they may be damaged and come loose later. CAUTION Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. NOTE3Stand BodyStand BaseFront13 EA P5 x 254 EA M4 x 142
ENGLISH14 ASSEMBLING AND PREPARINGMounting on a table1 Lift and tilt the TV into its upright position on a table.- Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.10 cm10 cm10 cm10 cm(4 inches)2 Connect the power cord to a wall outlet. Do not place the TV near or on sources of heat, as this may result in fire or other damage. CAUTIONSecuring the TV to a table(For 32/39/42/47/50/60LN5700, 32LN570B, 32/39/42/47/50/60LN5750, 47LN5790) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. WARNINGUsing the Kensington security system (optional)(Depending on model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.Connect the Kensington security system cable between the TV and a table. The Kensington security system is optional. You can obtain additional accessories from your local dealer. NOTE
ENGLISH15ASSEMBLING AND PREPARINGSecuring the TV to a wall (optional)(Depending on model)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first.2 Mount the wall brackets with the bolts to the wall.Match the location of the wall bracket and the eye-bolts on the rear of the TV.3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. Make sure that children do not climb on or hang on the TV. CAUTION Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer. NOTETidying cables1 Gather and bind the cables with the cable holder on the back of the TV.Cable holder Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur. CAUTION
ENGLISH16 ASSEMBLING AND PREPARINGMounting on a wallAn optional wall mount can be used with your LGTelevision. Consult with your local dealer for a wallmount that supports the VESA standard used by yourTV model. Carefully attach the wall mount bracket at therear of the TV. Install the wall mount bracket on a solidwall perpendicular to the floor. If you are attaching theTV to other building materials, please contact qualifiedpersonnel to install the wall mount. Detailed instructionswill be included with the wall mount. We recommendthat you use an LG brand wall mount.10 cm10 cm10 cm10 cm(4 inches)Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.Model 32LN5700 32LN570B 32LN575039/42LN5700 39/42LN5750VESA (A x B) AB200 x 100 200 x 200Standard screw M4 M6Number of screws 4 4Wall mount bracket (optional)LSW130B LSW230B Model 47/50/55/60LN5700 47/50/55/60LN5750 47/55LN5790VESA (A x B) AB400 x 400Standard screw M6Number of screws 4Wall mount bracket (optional)LSW430B  Disconnect the power before moving or installing the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the TV and void your warranty. Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. CAUTION Use the screws that are listed in the VESA standard screw specifications. The wall mount kit includes an installation manual and necessary parts. The wall mount bracket is optional. You can obtain additional accessories from your local dealer. The length of screws may differ depending on the wall mount. Make sure to use the proper length. For more information, refer to the manual supplied with the wall mount. NOTE
ENGLISH17MAKING CONNECTIONSMAKING CONNECTIONS This section uses illustrations of the LN5790 series.You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. The external device connections shown may differ slightly from illustrations in this manual. Connect external devices to the TV regardless of the order of the TV port. If you connect a gaming device to the TV, use the cable supplied with the gaming device. Refer to the external equipment’s manual for operating instructions. NOTEConnecting to an antenna or cableConnect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Make sure not to bend the copper wire of the RF cable.Copper wire Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. CAUTION Use a signal splitter to use more than 2 TVs. Visit ‘http://lgknowledgebase.com’ for more information about the antenna and cable connection. Search for antenna. DTV Audio Supported Codec: MPEG, Dolby Digital. NOTEANTENNA/CABLE INANTENNA/CABLE INAntennaVHF AntennaUHF AntennaCoaxial (75Ω)Terminal(*Not Provided)
ENGLISH18 MAKING CONNECTIONSConnecting to a HD receiver, DVD Player, or VCRConnect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.HDMI ConnectionHDMI is the best way to connect a device.Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.  High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. HDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/192k), DTS. NOTEIN 1 (ARC) IN 3 (MHL) IN 2HDMIDVD / Blu-Ray / HD Cable Box / HD STBChoose any HDMI input port to connect. It does not matter which port you use.(*Not Provided)
ENGLISH19MAKING CONNECTIONSDVI to HDMI ConnectionTransmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. When using the HDMI/DVI cable, Single link is only supported. NOTEIN 1 (ARC) IN 3 (MHL) IN 2PC-AUDIO INCOMPONENT IN / AV INPBPRVIDEO/YL/MONO AUDIO RAUDIO OUT DVI OUT(*Not Provided)(*Not Provided)DVD / Blu-Ray / HD Cable BoxWHITERED
ENGLISH20 MAKING CONNECTIONSConnecting to a mobile phoneMobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. This only works for the MHL-enabled phone. With some MHL supporting mobile phones, you can use the TV remote to control the phone. An MHL passive cable is needed to connect the TV and a mobile phone. Remove the MHL cable from the TV when: - the MHL function is disabled. - your mobile device is fully charged in standby mode. NOTEIN 3 (MHL) (*Not Provided)MHL CableMobile phone
ENGLISH21MAKING CONNECTIONSComponent ConnectionTransmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure the cables are matched with the corresponding color connection. NOTEPC-AUDIO INCOMPONENT IN / AV INPBPRVIDEO/ YL/MONO AUDIO RAUDIOVIDEOL R(*Not Provided)(*Not Provided)DVD / Blu-Ray / HD Cable BoxGREEN GREENBLUE BLUERED REDRED REDWHITE WHITE

Navigation menu