LG Electronics USA 60PA6500UA Plasma Monitor User Manual 1

LG Electronics USA Plasma Monitor 1

Contents

user manual-1

www.lg.comOWNER’S MANUALPLASMA TVPlease read this manual carefully before operating your set and retain it for future reference.P/NO : MFL62882769 (1110-REV00)42PA450050PA450050PA451042PA490050PA490060PA490050PA550060PA550050PA650060PA650042PA690050PA690060PA6900
2ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSAlways comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING/CAUTIONRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
3ENGENGLISHIMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Never touch this apparatus or antenna during a thunder or lightning storm. When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen. CAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
4ENGENGLISHIMPORTANT SAFETY INSTRUCTIONS Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). GroundingEnsure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.Short-circuit BreakerPower Supply DISCONNECTING DEVICE FROM THE MAIN POWER The power outlet must remain readily accessed in the event the device needs to be unplugged. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. ANTENNAS Outdoor antenna grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70NEC: National Electrical CodeGround ClampAntenna Lead in WireAntenna Discharge Unit(NEC Section 810-20)Grounding Conductor(NEC Section 810-21)Power Service GroundingElectrode System (NEC Art 250, Part H)Electric Service EquipmentGround Clamp Cleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odours coming from the TV, unplug the power cord contact an authorized service center. Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight.
5ENGENGLISHIMPORTANT SAFETY INSTRUCTIONS Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. Generated Sound“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.Preventing “Image burn” or “Burn-in” on your TV screen If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.For USA and CanadaFCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
6ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSAdditional information of the manualViewing the owner's manualThe owner’s manual in PDF file format is supplied on the enclosed CD. Install the Adobe Acrobat Reader to view the owner’s manual on your PC.1 Insert the supplied CD.The web page appears automatically.2 Click Owner’s Manual on the web page.3 View the owner’s manual. NOTE If the web page does not appear automatically, access My computer and then click LG and index.html to view the owner’s manual. NOTE Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. CAUTION Do not use any unapproved items to ensure the safety and product life span. Any damages or injuries by using unapproved items are not covered by the warranty.  In case of some model, the thin film on screen is a part of TV, So don’t take it off.
7ENGENGLISHTABLE OF CONTENTSTABLE OF CONTENTS2 IMPORTANT SAFETY INSTRUCTIONS6 Additional information of the manual7 TABLE OF CONTENTS8 ASSEMBLING AND PREPARING8 Unpacking10 Parts and buttons11 Lifting and moving the TV12 Setting up the TV12 - Attaching the stand 13 - Mounting on a table13 - Mounting on a wall14 MAKING CONNECTIONS14 Connecting to an antenna or cable15 Connecting to a HD receiver, DVD, or VCR player15 - HDMI Connection16 - DVI to HDMI Connection17 - Component Connection18 - Composite Connection19 Connecting to a PC19 - HDMI Connection, DVI to HDMI Connec-tion or RGB Connection21 Connecting to an Audio System21 - Digital Optical Audio Connection22 Connecting to a USB23 REMOTE CONTROL25 WATCHING TV25 Turning the TV on for the first time26 TROUBLESHOOTING28 SPECIFICATIONS30 OPEN SOURCE SOFTWARE NOTICEInstallation Procedure1. Open the package and make sure all the accessories are included.2. Attach the stand to the TV set.3. Connect an external device to the TV set.4. Make sure the network connection is available. You can use the LG Smart TV functions only when the network connection is made.
8ENGENGLISHASSEMBLING AND PREPARINGASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.Remote control,Batteries (AAA)Owner’s manual,CD manualCable holderScrew for assembly Power Cord holder Power CordProtection cover Ferrite core (Depending on model)Polishing cloth(Depending on model)Gently wipe the spots on the cabinet with the polishing cloth.FREEZERATIOL/R SELECTENTERBACK EXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1 2 34 5 67 809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT NOTE The items supplied with your product may vary depending on the model. Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.M4 x 30 M5 x 16x 4 x 3
9ENGENGLISHASSEMBLING AND PREPARING CAUTION Do not use any unapproved items to ensure the safety and product life span. Any damages or injuries by using unapproved items are not covered by the warranty.  In case of some model, the thin film on screen is a part of TV, So don’t take it off. NOTE The items supplied with your product may vary depending on the model. Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.[to an External device]10 mm (+/-5 mm)[to the TV] 2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.[to a wall plug] [to the TV] 3 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.[to a wall plug] [to the TV] 4 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to a wall plug. [to a wall plug] [to the TV] - If there is one ferrite core, follow as shown in Figure 4.- If there are two ferrite cores, follow as shown in Figures 1 and 2.- If there are three ferrite cores, follow as shown in Figures 1 and 3.[Cross Section of Ferrite Core][Figure 1][Cross Section of Ferrite Core][Figure 2][Cross Section of Ferrite Core][Figure 3][Cross Section of Ferrite Core][Figure 4]
10ENGENGLISHASSEMBLING AND PREPARINGParts and buttonsButton Description / ITurns the power on or off.INPUT Changes the input source.MENU Accesses the Home menu, or saves your input and exits the menus.ENTER ꔉSelects the highlighted menu option or confirms an input- VOL + Adjusts the volume level.v CH ^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.ENTER CHVOLMENUINPUTSpeakersRemote control and intelligent1 sensorsTouch buttons2 Screen
11ENGENGLISHASSEMBLING AND PREPARINGLifting and moving the TVWhen moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen.  It is recommended to move the TV in the box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect the power cord and all cables. When holding the TV, the screen should face away from you to avoid damage. Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.  When transporting a large TV, there should be at least 2 people. When transporting the TV by hand, hold the TV as shown in the following illustration.  When transporting the TV, do not expose the TV to jolts or excessive vibration. When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
12ENGENGLISHASSEMBLING AND PREPARINGSetting up the TVPut your TV on a pedestal stand and mount the TV on a table or wall.Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand.M4 x 30x 4 CAUTION Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.132 CAUTION When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.Stand BaseStand BodyFrontM5 x 16x 3
13ENGENGLISHASSEMBLING AND PREPARINGMounting on a table1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.10 cm10 cm10 cm10 cm(4 inch)2 Connect the power cord to a wall outlet. CAUTION Do not place the TV near or on sources of heat, as this may result in fire or other damage. NOTE Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 2020Mounting on a wallAttach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.LG recommends that wall mounting be performed by a qualified professional installer.10 cm10 cm10 cm10 cm(4 inch)Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.Model 50PA450050PA451050PA490050PA550050PA650050PA6900VESA 400 x 400Standard screw M6Number of screws 4Wall mount bracket (optional)PSW400B, PSW400BG
14ENGENGLISHMAKING CONNECTIONSMAKING CONNECTIONSConnect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connection may differ from the model. Connect external devices to the TV regardless of the order of the TV port. If you connect a gaming device to the TV, use the cable supplied with the gaming device. Refer to the external equipment’s manual for operating instructions.Connecting to an antenna or cableConnect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. ANTENNA/CABLE INVHF AntennaUHF AntennaAntennaTerminal NOTE To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. Use a signal splitter to use more than 2 TVs. If the antenna is not installed properly, contact your dealer for assistance. CAUTION Make sure not to bend the copper wire of the RF cable.Copper wire Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.Coaxial (75Ω)
15ENGENGLISHMAKING CONNECTIONSConnecting to a HD receiver, DVD, or VCR playerConnect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.HDMI ConnectionHDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.  High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.HDMI/DVI IN2 IN1(*Not Provided)DVD/ Blu-Ray / HD Cable Box / HD STB
16ENGENGLISHMAKING CONNECTIONSDVI to HDMI ConnectionTransmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.AUDIO OUTDVI OUT IN1AUDIO IN(RGB/DVI)(*Not Provided)(*Not Provided)DVD/ Blu-Ray / HD Cable Box

Navigation menu