LG Electronics USA 60PA6500UA Plasma Monitor User Manual 2

LG Electronics USA Plasma Monitor 2

Contents

user manual -2

17ENGENGLISHMAKING CONNECTIONSComponent ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with distorted color.  Check to ensure the cable are matched with the corresponding color connection.AUDIOVIDEOL RCOMPONENT INVIDEOAUDIOLPBPRR12YVIDEOAUDIORL/MONOAV IN(*Not Provided)(*Not Provided)DVD/ Blu-Ray / HD Cable BoxGREENGREENBLUEBLUEREDREDWHITEWHITEREDRED
18ENGENGLISHMAKING CONNECTIONSComposite ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.COMPONENT INLPBPRR12YVIDEOAUDIORL/MONOAV INVIDEOMONO( )AUDIOL RVCR / DVD/ Blu-Ray / HD Cable Box(*Not Provided)YELLOWWHITEREDYELLOWWHITEREDChoose any AV IN input port to connect. It does not matter which port you use.
19ENGENGLISHMAKING CONNECTIONSConnecting to a PC NOTE It is recommended to use the TV with the HDMI connection for the best image quality. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. The synchronization input form for Horizontal and Vertical frequencies is separate. Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.HDMI Connection, DVI to HDMI Connection or RGB ConnectionChoose method A, B, or C to make connection.Method A$8',2287 '9,287/DVI㶌⸬ (ARC)5*%2873&$8',2287+'0,/DVI IN2 /DVI IN2 AUDIO IN(RGB/DVI)RGB IN (PC)AUDIO IN(RGB/DVI)(*Not Provided)Choose any HDMI/DVI input port to connect. It does not matter which port you use.PC
20ENGENGLISHMAKING CONNECTIONSMethod C$8',2287 '9,287/DVI㶌⸬ (ARC)5*%2873&$8',2287+'0,/DVI IN2 /DVI IN2 AUDIO IN(RGB/DVI)RGB IN (PC)AUDIO IN(RGB/DVI)(*Not Provided)(*Not Provided)PC$8',2287 '9,287/DVI㶌⸬ (ARC)5*%2873&$8',2287+'0,/DVI IN2 /DVI IN2 AUDIO IN(RGB/DVI)RGB IN (PC)AUDIO IN(RGB/DVI)(*Not Provided)Choose any HDMI/DVI input port to connect. It does not matter which port you use.Method BPC
21ENGENGLISHMAKING CONNECTIONSConnecting to an Audio SystemUse an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off.Digital Optical Audio ConnectionTransmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE Do not look into the optical output port. Looking at the laser beam may damage your vision. Audio with ACP (Audio Copy Protection) function may block digital audio output.OPTICAL AUDIO IN OPTICAL DIGITALAUDIO OUT (*Not Provided)Digital Audio System
22ENGENGLISHMAKING CONNECTIONSConnecting to a USBConnect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files.USB INUSB(*Not Provided)
23ENGENGLISHREMOTE CONTROLREMOTE CONTROLThe descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.Make sure to point the remote control toward the remote control sensor on the TV. (POWER)Turns the TV on or off.ENERGY SAVINGAdjusts the brightness of the screen to reduce energy consumption.RATIOResizes an image.INPUTChanges the input source; Turns the TV on.TVReturns to the last TV channel.Number buttonEnters numbers.LIST, - (Dash) LIST: Accesses the saved channel list.- (Dash): Inserts a dash between numbers such as 2-1 and 2-2.FLASHBKAlternates between the two last channels selected (pressing repeatedly).ENERGYCHVOL1 2 34 5 67 809PAGESAVINGTVRATIOINPUTFAVMUTELISTFLASHBKBACK EXITENTERQ.MENUMENUINFOAV MODE
24ENGENGLISHREMOTE CONTROLColor buttonsThese access special functions in some menus.Control buttonsControls the Premium contents, Smart Share menus, or the SIMPLINK compatible devices (USB,SIMPLINK).VOL Adjusts the volume level.FAVAccesses your favorite channel list.INFOViews the information of the current program and screen.MUTEMutes all sounds.CH, PAGE CH: Scrolls through the saved channels.PAGE: Moves to the previous or next screen.MENUAccesses the main menu.AV MODESelects an AV mode.Q. MENUAccesses the quick menu.Navigation buttons (up/down/left/right) Scrolls through menus or options.ENTERSelects menus or options and confirms your input.BACK Returns to the previous level.SIMPLINK Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.EXITClears all on-screen displays and returns to TV viewing.ENERGYCHVOL1 2 34 5 67 809PAGESAVINGTVRATIOINPUTFAVMUTELISTFLASHBKBACK EXITENTERQ.MENUMENUINFOAV MODE
25ENGENGLISHWATCHING TVVOL Adjusts the volume level.FAVAccesses your favorite channel list.INFOViews the information of the current program and screen.MUTEMutes all sounds.CH, PAGE CH: Scrolls through the saved channels.PAGE: Moves to the previous or next screen.MENUAccesses the main menu.AV MODESelects an AV mode.Q. MENUAccesses the quick menu.Navigation buttons (up/down/left/right) Scrolls through menus or options.ENTERSelects menus or options and confirms your input.BACK Returns to the previous level.SIMPLINK Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.EXITClears all on-screen displays and returns to TV viewing.4 When the basic settings are complete, press ENTER.NOTE If you do not complete the Initial setting, it will appear whenever the TV turns on. Disconnect the power cord from the power outlet when you do not use the TV for a long period of time.5 To turn the TV off, press the power button on the remote control.WATCHING TVTurning the TV on for the first timeWhen you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.1 Connect the power cord to a power outlet.2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.NOTE You can also access Initial Setting by accessing OPTION in the main menu.3 Follow the on-screen instructions to customize your TV settings according to your preferences.Language Selects a language to display.Mode Setting Selects Home Use for the home environment.Time Zone Selects the time zone and daylight saving.Auto Tuning Scans and saves available channels automatically.NOTE To display images in the best quality for your home environment, select Home Use. Store Demo is suitable for the retail environment. If you select Store Demo, any customized settings will switch back to the default settings of Store Demo in 5 minutes.
26ENGENGLISHTROUBLESHOOTINGTROUBLESHOOTINGGeneralProblem ResolutionCannot control the TV with the remote control. Check the remote control sensor on the product and try again. Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed ( to , to ). Check if the appropriate input mode such as TV or VCR is set for using the remote control.No image display and no sound is produced. Check if the product is turned on. Check if the power cord is connected to a wall outlet. Check if there is a problem in the wall outlet by connecting other products.Image appears slowly when the TV turns on. The image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area.Cannot connect external devices.  Refer to the “Connection overview” and connect an external device.The TV turns off suddenly.  Check the power control settings. The power supply may be interrupted. Check if the Auto sleep feature is activated in the Time settings. Refer to the “Sleep Timer”. If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.AudioProblem ResolutionNo sound is produced while images are displaying. Press VOL + or - button. Check if the sound is muted by pressing MUTE. Scroll to other channels. There may a problem with the broadcast. Check if the audio cables are connected properly. Check if the TV Speaker feature is activated in the menu option. No output from one of the speakers  Adjust Balance in the menu option. Unusual sound from inside the TV is produced. A change in ambient humidity or temperature may result in an unusual noise when the product turns on or off. There is no problem with your product.
27ENGENGLISHTROUBLESHOOTINGVideoProblem ResolutionAn image displays in black and white or the color quality is poor. Adjust the color setting in the menu option.  Keep a sufficient distance between this product and other electronic products. Scroll to other channels. There may a problem with the broadcast.Horizontal or vertical bars appears or images blur Check if there are local interferences such as an electrical appliance or power tool.Lines or streaks appear on images  Check the antenna or aim the antenna to the proper direction.Afterimages (ghosts) appear when the product turns off Pixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent the pixel damage on the screen.The power is on but the screen appears extremely dark. Adjust the brightness and contrast in the menu option. “No Signal” appears on the screen.  Check if the signal cable is connected between the TV and products properly. Check the selected input source by pressing INPUT.Black spots appear on the screen.  Several pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the panel. This is normal.The display offset is wrong.  Adjust the position setting in the Picture menu. Check if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using the display settings on the external device.Thin lines appear in the background of the screen. Check the video cable connections.Horizontal noises appear or characters blur. Adjust the Phase setting in the menu option. Refer to the “SCREEN (RGB-PC)”.The reception on some channels is poor Scroll to other channels. There may a problem with the broadcast. The station signal may be weak. Aim the antenna to the proper direction. Check if there is local interference such as an electrical appliance or power tool.MovieProblem ResolutionThe file does not appear on the Movie List. Check whether the extension is supported.Message is displayedsaying “This file is invalid” or the audio is working normally but the video is not working normally. Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the resolution is supported. Check whether the video/audio codec is supported. Check whether the frame rate is supported.Message is displayed saying “Unsupported Audio” or the video is working normally but the audio is not working normally. Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the audio codec is supported. Check whether the bit rate is supported. Check whether the sample rate is supported.Subtitle is not working.  Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the video file and subtitle file name are the same. Check whether the video file and subtitle file are located in the same folder. Check whether the subtitle file is supported. Check whether the language is supported. (When you open the subtitle file in Memo Pad, you can check the language of the subtitle file.)
28ENGENGLISHSPECIFICATIONSSPECIFICATIONSPower requirement AC100 - 240 V ~ 50/60 HzTelevision System NTSC-M, ATSC, 64 & 256 QAMProgram Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135External Antenna Impedance 75 ΩEnvironmentconditionOperating Temperature0 - 40°COperating Humidity Less than 80%Storage Temperature -20 - 60°CStorage Humidity Less than 85%MODELS 50PA4510(50PA4510-UA)Dimensions(W x H x D)With stand 1168.0 mm x 758.0 mm x 297.0 mm(45.9 inch x 29.8 inch x 11.6 inch)Without stand 1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)Weight With stand 28.2 kg (62.1 lbs)Without stand 25.8 kg (56.8 lbs)MODELS 42PA4500(42PA4500-UA)50PA4500(50PA4500-UA)Dimensions(W x H x D)With stand991.8 mm x 667.0 mm x 230.5 mm(39.0 inch x 26.2 inch x 9.0 inch)1168.0 mm x 758.0 mm x 297.0 mm(45.9 inch x 29.8 inch x 11.6 inch)Without stand 991.8 mm x 613.8 mm x 52.5 mm(39.0 inch x 24.1 inch x 2.0 inch)1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)Weight With stand 21.5 kg (47.3 lbs) 28.2 kg (62.1 lbs)Without stand 20.0 kg (44.0 lbs) 25.8 kg (56.8 lbs)MODELS 42PA4900(42PA4900-UA)50PA4900(50PA4900-UA)Dimensions(W x H x D)With stand991.8 mm x 667.0 mm x 230.5 mm(39.0 inch x 26.2 inch x 9.0 inch)1168.0 mm x 758.0 mm x 325.5 mm(45.9 inch x 29.8 inch x 12.8 inch)Without stand 991.8 mm x 613.8 mm x 52.5 mm(39.0 inch x 24.1 inch x 2.0 inch)1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)Weight With stand 21.5 kg (47.3 lbs) 27.6 kg (60.8 lbs)Without stand 20.0 kg (44.0 lbs) 24.5 kg (54.0 lbs)Product specifications may be changed without prior notice due to upgrade of product functions.
29ENGENGLISHSPECIFICATIONSMODELS 60PA4900(60PA4900-UA)Dimensions(W x H x D)With stand 1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)Without stand 1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)Weight With stand 42.6 kg (93.9 lbs)Without stand 38.5 kg (84.8 lbs)MODELS 50PA5500(50PA5500-UA)60PA5500(60PA5500-UA)Dimensions(W x H x D)With stand1168.0 mm x 758.0 mm x 297.0 mm(45.9 inch x 29.8 inch x 11.6 inch)1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)Without stand1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)Weight With stand 28.7 kg (63.2 lbs) 42.6 kg (93.9 lbs)Without stand 26.3 kg (57.9 lbs) 38.5 kg (84.8 lbs)MODELS 50PA6500(50PA6500-UA)60PA6500(60PA6500-UA)Dimensions(W x H x D)With stand1168.0 mm x 758.0 mm x 297.0 mm(45.9 inch x 29.8 inch x 11.6 inch)1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)Without stand1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)Weight With stand 28.7 kg (63.2 lbs) 42.6 kg (93.9 lbs)Without stand 26.3 kg (57.9 lbs) 38.5 kg (84.8 lbs)MODELS 42PA6900(42PA4900-UA)50PA6900(50PA4900-UA)Dimensions(W x H x D)With stand991.8 mm x 667.0 mm x 230.5 mm(39.0 inch x 26.2 inch x 9.0 inch)1168.0 mm x 758.0 mm x 325.5 mm(45.9 inch x 29.8 inch x 12.8 inch)Without stand 991.8 mm x 613.8 mm x 52.5 mm(39.0 inch x 24.1 inch x 2.0 inch)1168.0 mm x 704.0 mm x 52.5 mm(45.9 inch x 27.7 inch x 2.0 inch)Weight With stand 21.5 kg (47.3 lbs) 27.6 kg (60.8 lbs)Without stand 20.0 kg (44.0 lbs) 24.5 kg (54.0 lbs)MODELS 60PA6900(60PA4900-UA)Dimensions(W x H x D)With stand 1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)Without stand 1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)Weight With stand 42.6 kg (93.9 lbs)Without stand 38.5 kg (84.8 lbs)
30ENGENGLISHSPECIFICATIONSOPEN SOURCE SOFTWARE NOTICETo obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
31ENGENGLISHSPECIFICATIONS
This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.(For USA, Canada, Mexico)The extended owner’s manuals that contain information on the advanced features of this LG TV are located on the CD-ROM provided in an electronic version.To read these files, you will need to use the personal computer (PC) equipped with a CD-ROM drive.The model and serial number of the TV is located on the back and/or one side of the TV.Record it below should you ever need service.MODELSERIALRegister your product Online!LG Customer Information CenterFor inquires or comments, visit www.lg.com or call;www.lg.com1-800-243-00001-888-865-30261-888-542-2623USA, Consumer UserUSA, Commercial UserCANADA

Navigation menu