LG Electronics USA 60PS80UA PLASMA TV/MONITOR User Manual
LG Electronics USA PLASMA TV/MONITOR
Contents
- 1. User manaul 1 of 2
- 2. User manual 2 of 2
User manual 2 of 2
SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. OPTION Move Menu Language : English Audio Language : English Enter Input Label SIMPLINK : On Key Lock : Off Simple Manual Caption : Off 1 MENU Select OPTION. ENTER Select Simple Manual. ENTER Select the part of the manual you want to see. 4RETURN WATCHING TV / CHANNEL CONTROL THX Media Director : Off Return to TV viewing. 61 WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. ■ You can also select the desired input source in the INPUT menu. ENTER INPUT TV WATCHING TV / CHANNEL CONTROL HDMI4 AV2 HDMI3 Component1 HDMI2 ie) HDMI1 Component2 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V). Then, you can select your desired Input Label with using Blue button. G p . 6 3 ie) In case of changing the input label using Blue button VCR TV ■ ■ ■ ■ 62 AV1 AV1 Game AV2 DVD Component1 Set Top Box Component2 When new external device is connected, this popup menu is displayed automatically. If selecting Y e s, you can select input source that you want to appreciate. But, when selecting “SIMPLINK - O n”, popup menu for HDMI input will not be displayed. T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V: Select them to watch a VCR or other external equipment. ■ ■ ■ New external input is connected. Do you want to use this? AV2 Yes No Component: Select them to watch DVD or a Digital set-top box. RGB-PC: Select it to view PC input. H D M I: Select them to watch high definition devices. INPUT LABEL You can set a label for each input source when it's not in use. OPTION Move Enter OPTION Move Enter Menu Language : English Menu Language : English Audio Language : English Audio Language : English AV1 Input Label Input Label THX Media Director : Off : On Key Lock : Off Simple Manual Caption : Off : OffHDMI1 Caption HDMI2 HDMI3 HDMI4 Close With using OPTION menu With using INPUT button 1 MENU Select OPTION. ENTER Select Input Label. ENTER Select the source. INPUT BLUE 3RETURN MENU Select the label. 5RETURN MENU Select the source. Select the label. WATCHING TV / CHANNEL CONTROL SIMPLINK AV2 THX Media Director : Off Component1 SIMPLINK : On Component2 Key Lock : Off RGB-PC Simple Manual Return to the previous menu. Return to TV viewing. Return to the previous menu. Return to TV viewing. 63 WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Off WATCHING TV / CHANNEL CONTROL Game Cinema or Cinema Sport ■ AV MODE Press the AV MODE button repeatedly to select the desired source. ENTER ■ ■ ■ ■ ■ 64 Cinema” If you select “Cinema / in AV mode, Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. If you select “O f f” in AV mode, the “Picture Mode” and “Sound Mode” return to previous selected value. O f f: Disables the AV MODE. Cinema: Optimizes video and audio for watching movies. Sport: Optimizes video and audio for watching sports events. Game: Optimizes video and audio for playing games. KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Move Enter OPTION Enter Menu Language : English Audio Language : English Audio Language : English Input Label THX Media Director : Off THX Media Director : Off SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption Off On : Off Select OPTION. ENTER Select Key Lock. ■ ENTER 4RETURN MENU WATCHING TV / CHANNEL CONTROL : English Input Label 1 MENU Move Menu Language Select O n or O f f. ■ Return to the previous menu. Return to TV viewing. In Key Lock ‘O n’, if the TV is turned off, press the r / I, INPUT, CH (DE or button on the TV or POWER, INPUT, ) or NUMBER buttons on the CH ( remote control. With the Key Lock On, the display ‘ ! Key Lock’ appears on the screen if any button on the front panel is pressed while viewing the TV. 65 WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus. OPTION Move Enter OPTION Move Enter WATCHING TV / CHANNEL CONTROL Menu Language : English Menu Language : English Audio Language : English Audio Language : English Input Label Input Label THX Media Director : Off THX Media Director : Off SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Caption On Simple Manual : Off 1 MENU Off Caption : Off Select OPTION. ENTER Select SIMPLINK. ENTER Select O n or O f f. 4RETURN MENU Return to the previous menu. Return to TV viewing. ! NOTE Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop. G When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers and the TV speakers are turned off. G If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an OPTICAL cable. 66 SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ Select AV device: Enables you to select one of the AV devices connected to TV. ■ Disc playback: Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ Power off all devices: When you power off the TV, all connected devices are turned off. ■ Switch audio-out: Offers an easy way to switch audio-out. ■ Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. (A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function) Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control). ■ Display SIMPLINK menu. ENTER WATCHING TV / CHANNEL CONTROL SIMPLINK Menu Select the desired device. ENTER Control connected AV devices. TV viewing: Switch to the previous TV channel regardless of the current mode. DISC playback: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback: Control the connected VCR. HDD Recordings playback: Control recordings stored in HDD. Audio Out to Home Theater speaker/Audio Out to TV: Select Home Theater speaker or TV speaker for Audio Out. When no device is connected (displayed in gray) Selected Device When a device is connected (displayed in bright color) 67 NETWORK NETWORK SETTING If there is a DHCP server on the local area network (LAN), the TV will automatically be allocated an IP address. If you’re using a broadband router orbroadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function, select Auto Resetting. The IP address will automatically be determined. If there is no DHCP server on the network and you want to set the IP address manually, select Manual Resetting. For detail information, contact your internet provider. NETWORK Move NETWORK Enter NETWORK Network Setting Network Setting Software Update Software Update ESN ESN Move Enter Address Type : Manual Set IP Address : 192.168.0.10 Subnet Mask : 255.255.255.0 Gateway : 192.168.0.1 DNS Server : 156.147.135.180 192 Manual Resetting 1 MENU ENTER Select NETWORK. Select Network Setting. ENTER Select Auto Resetting or Manual Resetting. Manual Resetting ENTER GHI PQRS ABC JKL TUV DEF MNO Input the setting value. WXYZ 5RETURN MENU Return to the previous menu. Return to TV viewing. 168 10 255 135 180 Subnet Mask 255 255 Gateway 192 Auto Resetting Close 68 IP Address 168 DNS Server 156 147 Close SOFTWARE UPDATE You can update the TV using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your player. NETWORK Move If there is no update available Enter If newer version exists Network Setting Software Update ESN ENTER No update version is found. Update version is found. Software : Checking... Software : None Software : 03.00.01 Netflix : Checking... Netflix : None Netflix : 03.02.03 Yahoo! : Checking... Yahoo! : None Yahoo! : 03.02.02 Update Update Update Cancel Cancel Cancel Select NETWORK. Select Software Update. ■ ■ ■ ENTER Start update version checking. If newer version exists, start update. ■ ■ ■ NETWORK 1 MENU Checking for update version... Before updating the software, remove USB Device from the TV. Before updating the software, turn the TV off and then turn it on again. During the software update procedure, do not turn off the TV or disconnect AC power, or do not press any button. If you cancel the update, turn off the TV and turn it on for stable performance. This TV cannot be updated to previous software version. After software update, you can confirm the update software version in ??/ menu. 69 NETWORK NETFLIX ESN (ELECTRONIC SERIAL NUMBER) We provide you the Netflix ESN (Electronic Serial Number) that allows you to rent and purchase videos using the Netflix website. For more information, please visit: www.netflix.com NETWORK Move Enter NETWORK Network Setting Network Setting Software Update Software Update ESN ESN Move Enter i.e) ESN Number : LGE-42LH500003000005A18E NETWORK Close 1 MENU ENTER 3RETURN MENU 70 Select NETWORK. Select E S N. The serial number will appear. Return to the previous menu. Return to TV viewing. NETFLIX Activating TV The TV with Netflix® straming capabilities lets you instantly access a library of over 12000 video titles right on our HDTV. It’s simple. With high-speed internet access and a Netflix® subscription, you have your choice of any Netflix® “Watch Instantly” title to view to home in a matter of seconds. To become a Netflix member visit: www.netflix.com/LG Activating your TV establishes a connection between your TV and your Netflix account. You must activate your TV before you can use it to watch movies streamed over the INTERNET from Netflix. no - start my FREE trial Select NETWORK. MENU NETWORK ENTER Select NETFLIX. ENTER Select I'm now a member. ENTER ■ Select yes-activate instant streaming from Netflix if you have an existing account. "no-start my FREE trial" : If you have no an account, visit http://www.netflix.com/LG on your computer. On your computer, visit www.netflix.com/activate. Wait for the activation screen to appear on your TV screen. You are now ready to complete activation on the Netflix website. If necessary, enter your Sign in Name and Password to log into your account. yes-activate instant streaming from Netflix Enter the activation code that appears on your TV screen. When the “Congratulations” screen appears on your TV, you’re ready to add movies to your instant Queue. See Filling your instant Queue for instruction. Netflix Deactivation To deactivates the TV, press the BLUE button on the remote control. 71 NETWORK Watching instant by Netflix After you activate your player, you’re ready to add movies & TV episodes to your instant Queue. You can then use your player’s remote to browse your instant Queue and to select and watch titles on your TV. You will be amazed at how quick and easy it is. Your instant Queue works just like your DVD Queue. Add and manage the movies & TV episodes in your instant Queue from the Netflix website on your computer. Your instant Queue also appears on your TV via your player, so your selections are available to watch anytime. NETWORK Visit the Netflix website on your computer: http://www.netflix.com If necessary, enter your Sign in Name and Password to log into your account. Click Watch Instantly. When you find a movie or TV episode you want to watch, mouse over the Add/Play button to reveal additional options, and then click Add to instant Queue. Repeat step 4 to add more movies & TV episodes to your instant Queue. ■ (Optional) Arrange your instant Queue by clicking the Instant subtab. ■ 72 To rearrange your instant Queue, drag and drop the titles in the order you want them, or change the numbers to the left of the titles and then click U p d a t e I n s t a n t Q u e u e to your changes. To remove a title from your instant Queue, click the Remove check box to the right of the title and then click Update Instant Queue to your changes. The Poster Screen Components It shows “box art” (title-specific DVD cover or movie poster images) for each of the movie in the member’s instant queue and allows navigation through that queue using the remote control. The instant queue is a list of movies and TV shows selected previously by the member on the Netflix web site. Instant Queue Current movie/Total movie Unselected movie Selected movie Selected movie name Running time Parental rating NETWORK The Springboard Screen Components It shows a synopsis and other details about the title, and lists actions that can be taken on it (including resuming playback, rating the title, and selecting a different episode if the title has episodes). Instant Queue Current movie/Total movie Selected movie name Resume playing Preview selection Evaluation Remove from queue Title box Actor or Actress name Synopsis Running time Making year Parental rating Director Movie type 10 11 12 13 14 15 10 13 11 12 14 15 73 NETWORK Selecting a movie to watch on your TV After you set up your player and add movies & TV episodes, you can browse and watch them on your TV. 1 MENU Select NETWORK. ENTER ENTER NETWORK Select NETFLIX. The instant Queue screen will appear. Move to previous or next movie on your instant Queue. Move to the previous or next page. The selected movie shows the title, rating and total time. ■ ■ Play back the highlighted title. ■ ENTER View details for the highlighted title. ■ Choose any of the menu items ■ Show springboard screen for selected title (See previous page). Return to your instant Queue. ■ ■ 74 play: Starts playing the selected title. resume playing: Plays a previously paused title from the scene where you paused it. This option is available only if you begin watching a title and then pause it. play from beginning: Starts playing from the beginning of the selected title. choose a different episode (TV series only): Enables you to select a specific show of a TV series. Press b / B to highlight the show you want to view, and then press ENTER to choose it. rate: Enables you to rate a movie or show. The more stars, the higher the rating. Press ENTER to access the rating feature, and then press b / B to increase or decrease the rating. Press ENTER again to confirm the selected rating. remove: Deletes the selected movie from your instant Queue. remove series (TV series only): Deletes the selected TV series from your instant Queue. Playing a movie While watching a movie or TV episode from Netflix via your TV, you have full control over your viewing experience. You can use the buttons on the remote to pause and resume viewing and to scan forward and backward, just like when you watch a DVD. While playing a movie, the buttons on the remote do the following: NETWORK Button Operation Starts playing back the movie. Pauses playing the movie and enters frame scanning mode. To scan backward one frame at a time, press the button again. To pause a movie while it’s playing. To resume playing a paused movie, press button again. Pauses playing the movie and scans forward or backward through the movie. To scan faster, press the button again. To play the highlighted scene, press ENTER or G (Play). To resume playing from the point you paused the movie, press . Stops the movie. Displays your instant Queue. ENTER Pauses playing the movie and enters frame scanning mode. NETCAST Pauses playing the movie and enters frame scanning mode. To scan forward one frame at a time, press the button again. When you have finished watching movies streamed from Netflix, simply press the button on the remote control to go to the NETWORK Menu. ! NOTE Even if you use a high-resolution setup, audio/video quality may be compromised based on the speed of your broadband internet connection. Your Internet Service Provider (ISP) determines your broadband speed. We recommend a minimum connection speed of 1.5 Mbps. For the best quality picture, a connection speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on your ISP’s network conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you want to increase your connection speed. Many ISPs offer a variety of broadband speed options. 75 MY MY MEDIA Entry mode using USB device When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the NETWORK menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the USB IN jacks on the TV. USB IN ■ This TV supports JPG and MP3 files. When removing the USB device NETWORK IN 4 Memory Key NETCAST Select the USB Device menu before removing the USB device. Select MY MEDIA. ENTER ENTER Select Pho t o Li s t or Mu s i c Li s t. 1Q. MENU ENTER Choose the media you want. Select USB Device. Select Eject. Photo List Music List Close Precautions when using the USB device 76 Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Only use a USB storage device which has normal music files or image files. Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. Please connect power to a USB storage device (over 0.5A) which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. Some USB storage devices may not be supported or operate properly. Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage. If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. In case of USB storage devices formatted as NTFS, deletion is not allowable. File alignment method of USB storage device is similar to Window XP and file name can recognize up to 100 English characters. The recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB memory. If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and on again to make it work properly. Refer to the user manual of the application USB external hard disk. Entry mode using Network You can view the photo or listen musics in the folder shared by the network. 1 Setup CIFS (Commom Internet File System) in your PC. Click Sharing. Check Share this folder. NETWORK 2 Connect the Modem or Router LAN port to the LAN port of the TV. AV IN 1 LAN VIDEO L (MONO) AUDIO R NETCAST Select MY MEDIA. ENTER ENTER Select Pho t o Li s t or Mu s i c Li s t. Choose the media you want. Photo List Music List Close 77 NETWORK PHOTO LIST You can view .JPG files from USB storage devices or the folder shared by the network. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG ■ ■ ■ You can play JPG files only. Only baseline scan is supported among JPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 NETWORK Screen Components Moves to upper level folder Preview: Display the thumbnail/folder name of the photo in the selected folder Current page/Total pages Total number of marked photos Corresponding buttons on the remote control Photo List Page 2/3 No Marked Up Folder Drive1 butterfly 1366x768, 125KB Up Folder Navigation Popup Menu 78 CH Page Change MARK Mark Exit Photo Selection and Popup Menu Photo List Choose the media you want. No Marked Page 1/1 Drive1 MULTIMEDIA butterfly Network Photo List Music List 6 folder(s), 1 file (s) Close Up Folder Navigation Page 1/1 Photo List No Marked Up Folder Drive1 butterfly Page Change CH Page 1/1 MARK Mark Exit No Marked NETWORK Photo List Popup Menu Up Folder Drive1 butterfly 1366x768, 125KB View Mark All 1366x768, 125KB Navigation 1366x768, 125KB Delete Up Folder Up Folder Close Popup Menu CH Page Change MARK Mark Exit Navigation Popup Menu CH Page Change MARK Mark Exit When you select a file (not folder), this PopUp menu is displayed. G View: Display the selected item. G Mark All: Mark all photos on the screen. G Unmark All: Deselect all marked photos. G Delete: Delete the selected photo item. G Close: Close the pop-up menu. NETCAST Select MY MEDIA. ENTER ENTER ENTER ENTER ENTER Select Photo List. Select the target drive or Network. (It displays the device which connected TV). Select the desired photos. Show the Popup menu. Select the desired Popup menu. ■ Use the C H button to navigation in the photo page. ■ Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. 79 NETWORK Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. Photo List Page 1/1 No Marked Up Folder Drive1 butterfly NETWORK 1366x768, 125KB Up Folder Navigation Popup Menu Photo List Page 1/1 CH Page Change MARK Mark Exit No Marked Up Folder Drive1 butterfly 1366x768, 125KB View Mark All 1366x768, 125KB Delete Up Folder Close 1/17 Slideshow Navigation Popup Menu CH Page Change MARK Mark BGM Delete Option Hide Exit The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Select the target drive or Network. ENTER ENTER 80 Select the desired photos. Show the Popup menu. Select Vi ew. ENTER The selected photo is displayed in full size. ■ Use the C H photo page. button to navigation in the 6 ENTER Select the Slideshow, BGM, Delete, Option, or Hide. (Rotate), ■ 1/17 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. ■ Use button to select and control the menu on the full-sized screen. NETWORK Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. ■ Set the time interval of the slide show in Option. G B G M: Listen to music while viewing photos in full size. ■ Set the BGM device and album in Option. (Rotate): Rotate photos. ■ Rotates the photo 90°, 180°, 270°, 360° clockwise. ■ Photo cannot be rotated if its width is greater than the available supported resolution height. G Delete: Delete photos. G Option: Set values for Slide Speed and Music Album. ■ Use button and ENTER button to set values. Then go to and press ENTER to save the settings. ■ You cannot change Music Album while BGM is playing. G Hide : Hide the menu on the full-sized screen. ■ To see the menu again on the full-sized screen, press ENTER button to display. Press F G to set the time interval between slides. Slide Speed Music Album Enter Fast ... Cancel ! NOTE This TV will not be able to decode most JPG images saved using the Progressive option. 81 NETWORK MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device or the folder shared by the network This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 ■ ■ NETWORK Bit rate range 32 Kbps - 320 Kbps Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz Screen Components Moves to upper level folder Preview: If any album jacket for the file exists, this jacket is displayed. Current page/Total pages Total number of marked musics Corresponding buttons on the remote control Music List Page 2/3 No Marked Drive1 Aisensi Title Duration Up Folder 00:00 / 04:16 Up Folder Navigation Popup Menu 82 CH Page Change MARK Mark Exit Music Selection and Popup Menu Music List Choose the media you want. Page 1/1 No Marked MULTIMEDIA Duration Title Drive1 Drive1 Network Photo List Music List 6 folder(s), 1 file (s) Close Up Folder Music List Page 2/3 Drive1 Aisensi Music List No Marked Drive1 Aisensi Duration Title Up Folder Popup Menu Page 2/3 CH Page Change MARK Mark Exit No Marked Title Duration Up Folder NETWORK Navigation 3945 KB 128 Kbps Play Play with Photo Mark All 00:00 / 04:16 00:00 / 04:16 Delete Up Folder Navigation Up Folder Close Popup Menu NETCAST CH Page Change MARK Mark Exit Navigation Popup Menu CH Page Change MARK Mark Exit Select MY MEDIA. Select Music List. ENTER Select Drive 1 or Network. (It displays the device which connected TV). ENTER ENTER ENTER Select the desired musics. Show the Popup menu. ENTER Select the desired Popup menu. 83 NETWORK Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop. G Play Marked: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G Stop Play (During playback): Stop the playing musics. G Play with Photo: Start playing the selected musics and then move to the Photo List. G Mark All: Mark all musics in the folder. G Unmark All: Deselect all marked music. G Delete: Delete the selected music. G Close: Close the pop-up menu. Music List Drive1 Aisensi Page 2/3 No Marked Duration Title Up Folder 00:00 / 04:16 Up Folder NETWORK Navigation Music List Drive1 Aisensi Popup Menu Page 2/3 CH Page Change MARK Mark Exit No Marked Duration Title Up Folder 3945 KB 128 Kbps Play Play with Photo Mark All 00:00 / 04:16 Delete Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Select the target folder or drive. Select the desired musics. ENTER ENTER 5RETURN 84 Close Show the Popup menu. ENTER Select the desired Popup menu. Return to TV viewing. ■ Use the C H button to navigation in the music page. ■ Use MARK button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play. ■ The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time. NETWORK ! NOTE When music is playing, is displayed in front of the music play time. A damaged or corrupted music file that does not play displays 00:00 as the play time. Music files with copy-protection will not play. Press ENTER, A , or RETURN button to stop the screen saver. 85 NETWORK YAHOO!WIDGETS You can enjoy widget on your TV and available to select a useful snippets in dock,at the bottom of your TV. These snippets contain updated weather, sports score, updated stock, and view photo/video. OOBE (Out-of-Box-Experience) NETWORK 1 NETCAST ENTER Display the Yahoo!Widgets. Start Widgets setting. ENTER Select the alphabet. ENTER Select Save this name. ENTER Select Ok, I accept. ENTER Select your country. ENTER Select Ok, I accept. ENTER Select Ok, I accept. 86 Tutorial 1 Choose any of the menu items Tutorial 5 Tutorial 2 Tutorial 6 NETWORK Red button: Close the widget. Green button: Change the widget’s settings. Yellow button: Manage your snippets. Blue button: Size video to fit, or make it fullscreen. Tutorial 3 Tutorial 4 If you wnat to run this step again, select “Replay introduction” from the Profile widget at any time. 87 NETWORK Available Widgets Flicker: Finance: G Gallery: G News: G Weather: When pressing the Yellow button in the dock, you can select the Weather widget. NETWORK Setting Widgets L/R button: Select snippet. U/D Enter button: Enter the selected widget. Blue button: Change viewport. Yellow: Move/Delete the selected widget. Yahoo: Slide out the dock. Menu: Show the Menu. Button Yahoo (Widgets) Show the DOCK. up/down Move to sub menu highlight. enter Show Snippets. menu Return to MENU OSD red Exit Yahoo mode. Close the widget. green Enter to weather widget setting mode back/red blue Left/right Yellow 88 Operation Change viewport (aspect ratio) Move between snippets in the dock Edit snippets NETWORK 89 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. PICTURE Move Enter PICTURE Aspect Ratio : 16:9 Aspect Ratio : 16:9 Picture Wizard Picture Wizard Energy Saving : Off Picture Mode Picture Mode PICTURE CONTROL • Backlight 80 Just Scan • Contrast 90 • Contrast 90 Set By Program • Brightness 50 • Brightness 50 4:3 • Sharpness 70 • Sharpness 60 Zoom MENU 90 Cinema Zoom 1 Select PICTURE. Select Aspect Ratio. 4RETURN 16:9 70 ENTER : Standard • Backlight ■ ENTER Enter Energy Saving : Off : Standard 1 MENU Move Select the desired picture format. Return to the previous menu. Return to TV viewing. ■ You can also adjust Aspect Ratio in the Q.MENU. Press the RATIO button repeatedly to select the desired picture format. 4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. Just Scan operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p) input source. Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. ■ When adjusting in Q.MENU menu, a. or button: Adjust proportion of Zoom. b. or button: Move the image on the screen. Just Scan Cinema Zoom Set By Program Selects the proper picture proportion to match the source’s image. (4:3 4:3) Set By Program (16:9 PICTURE CONTROL 16:9 Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. or button: Adjust proportion of Cinema Zoom. The adjustment range is 1-16. ■ or button: Move the image on the screen. ■ 16:9) Set By Program 91 PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to L o w, Recommended or H i gh, you can see the example of the changes you made. PICTURE Move Enter White Level Set the screen above identical to the Recommended sample below. Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off : Standard 70 • Contrast 90 • Brightness 50 • Sharpness 70 Low Recommended • Contrast 90 High • Backlight Picture Mode Previous 1 MENU ENTER ENTER ENTER Select Picture Wizard. Adjust White Level. Color Set the screen above identical to the Recommended sample below. Picture Wizard With Picture Wizard, you can adjust the picture quality of the original image. Low • Color 50 High Recommended PICTURE CONTROL Select PICTURE. Next Previous Previous Next Next ENTER Adjust Color. Adjust Picture Wizard. ENTER Tint Black Level Set the screen above identical to the Recommended sample below. Set the screen above identical to the Recommended sample below. Low Recommended Recommended 50 • Tint • Brightness High High Previous Previous ENTER 92 Next Next Low Adjust Black Level. ENTER Adjust T i n t. Complete Horizontal Sharpness Select (an) input(s) to apply the settings. Set the screen above identical to the Recommended sample below. DTV TV AV1 AV2 Recommended 50 • H Sharpness High Component1 Component2 Low RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 Next Warning: The picture quality may vary according to the different types of signal and inputs. Previous Move MARK Mark Confirm Vertical Sharpness Set the screen above identical to the Recommended sample below. Recommended 50 • V Sharpness High MARK FAV 12 Select input source to apply the settings. Save. ENTER Low 11 PICTURE CONTROL Adjust Horizontal Sharpness. ENTER Previous Previous Next ENTER Adjust Vertical Sharpness. The current adjustment value is saved to Expert1. Close 13 For LCD TV Finish the Picture Wizard. ENTER Backlight Set the Backlight to your Brightness preference. ■ Recommended Previous 50 • Backlight Bright Dark ■ Next If you stop the setting before the final step, the changes will not be saved to the TV. Once the Picture Wizard sets the picture quality, Energy Saving is changed to O f f automatically. 10 ENTER Adjust Backlight. 93 PICTURE CONTROL PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. PICTURE Move Enter PICTURE Move Aspect Ratio : 16:9 Aspect Ratio : 16:9 Picture Wizard Picture Wizard Energy Saving : Off Picture Mode Enter Energy Saving : Off : Standard Picture Mode : Standard • Backlight 70 • Backlight • Contrast 90 • Contrast • Brightness 50 • Brightness • Sharpness 70 • Sharpness Intelligent Sensor Vivid Vivid 70 Standard 90 Standard Natural 50 Cinema 70 Sport Cinema Game Sport Expert1 Game Expert2 Expert1 Expert2 Plasma TV LCD TV PICTURE CONTROL 1 MENU ENTER ENTER 4RETURN MENU Select PICTURE. ■ Select Picture Mode. ■ Plasma TV: Select Vivid, Standard, Cinema, Sport, or Game. LCD TV: Select Intelligent Sensor, Vivid, Standard, Natural, Cinema, Sport, or Game. ■ ■ ■ ■ Return to the previous menu. Return to TV viewing. ■ ■ ■ ■ ■ ■ ■ 94 ■ Vivid, Standard, Natural, Cinema, Sport, and Game Settings are preset for the optimum picture quality at the factory. Vivid: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, color and sharpness for vivid picture. Standard: This is the mode to realize optimum viewing condition for the general user. Natural: This is the mode to display the most natural screen status. Cinema: This mode optimizes video for watching movies. S p o r t: This is the video mode to emphasize dynamic video and primary color (e.g, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports. Game: This is the mode to realize fast response speed in a fast gaming screen. Expert: This is the mode to adjust the video in detail for video quality expert and general user. You can also adjust Picture Mode in the Q.MENU. When selecting Intelligent Sensor, Energy Saving is changed to Auto automatically. When selecting Intelligent Sensor, it is changed contrast, brightness, sharpness, color and tint automatically. Intelligent Sensor: The most suitable picture is automatically adjusted according to the surrounding conditions. Cinema: This is cinema quality mode to provide you the experience of watching a movie at home. The user will be able enjoy the best level of satisfactory screen quality in any movie without any separate adjustments. Cinema expresses the optimal screen quality when it is darkest. Cinema, Aspect ratio changes to Just scan. When selecting MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. Cinema” (For Plamsa TV). This feature is disabled in “Picture Mode- PICTURE Enter : 16:9 Picture Wizard Energy Saving : Off • Backlight : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 70 Picture Mode Aspect Ratio Move Enter 1 MENU ■ ENTER Select Picture Mode. ■ ENTER ENTER Select Vivid, Standard, Natural, Cinema, Sport, or Game. Select Backlight (For LCD TV), Contrast, Brightness, Sharpness, Color, or T i n t. ENTER 6RETURN MENU Make appropriate adjustments. Return to the previous menu. ■ ■ Return to TV viewing. ■ ■ ■ When adjusting Energy Saving, Backlight function is disabled. Backlight (For LCD TV): This function adjusts the brightness of LCD panel, to control the brightness of the screen. Adjusting the backlight is recommended when setting the brightness of the set. When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and the power consumption is reduced. Contrast: Increase or decrease the gradient of the video signal. You may use Contrast when the bright part of picture is saturated. Brightness: Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated. Sharpness: Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color: Adjusts intensity of all colors. T i n t: Adjusts the balance between red and green levels. PICTURE CONTROL Select PICTURE. 95 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for each Picture Mode. PICTURE Move PICTURE Enter 50 • Brightness 50 • Sharpness 50 • Color 50 • Contrast 50 Color Temperature • Brightness 50 Dynamic Contrast • Sharpness 50 Medium • ColorDynamic Color 50 • Tint Noise Reduction Screen (RGB-PC) PICTURE CONTROL ENTER Select Advanced Control. ENTER Select your desired options. Make appropriate adjustments. 5RETURN MENU Return to the previous menu. Return to TV viewing. Dynamic Color Off Noise Reduction Off Gamma Medium Black Level Film Mode Real Cinema Off Low Close LCD TV Off Off Close Medium Off Low Select PICTURE. Eye Care TruMotion 120Hz 1 MENU Color Temperature Dynamic Contrast Medium • Picture Reset Black Level • Picture Reset Screen (RGB-PC) Off G Off • Advanced Control Gamma • Advanced Control 96 Enter • Contrast • Tint Move Low Off Plasma TV EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in. PICTURE Move Enter PICTURE 16:9 • Brightness Picture Wizard Expert1 • Backlight 70 Intelligent Sensor 90 Vivid • Brightness 50 Standard • H Sharpness 50 Natural • Contrast Screen (RGB-PC) Cinema Sport 50 Off Low Medium Gamma Medium Low • Picture RealReset Cinema Off Film Mode Off TruMotion 120Hz Low Color Standard Color Standard HD Color Gamut Standard High Low HD Standard Edge Enhancer High xvYCC Auto Close Close LCD TV Plasma TV PICTURE CONTROL Select PICTURE. Off Noise Reduction Black Level Expert2 Dynamic Contrast Low Edge Enhancer Expert1 Black Level • Expert Control Color Gamut Game 1 MENU Enter • H Sharpness 50 Dynamic Contrast • V Sharpness 50 Noise Reduction • Color 50 • Tint Gamma 0 R Energy Saving: Off Picture Mode Move Aspect Ratio ENTER Select Picture Mode. ENTER Select ENTER Select Expert Control. ENTER Select your desired menu option. Expert1 or Expert2. Make appropriate adjustments. 7RETURN MENU Return to the previous menu. Return to TV viewing. 97 PICTURE CONTROL Color Temperature Dynamic Contrast ■ Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. ■ Reduces screen noise without compromising video quality. Dynamic Color Noise Reduction Gamma PICTURE CONTROL Black Level Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter. Auto: Realizing the black level of the screen and set it to High or Low automatically. ■ Set black level of the screen to proper level. ■ This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'. ■ Eye Care (For LCD TV) Real Cinema or Film Mode TruMotion 120Hz (For LCD TV) 98 Low : Make dark and middle gray level area of the picture brighter. Medium: Express original picture levels. High: Make dark and middle gray level area of the picture darker. ■ You can adjust brightness of dark area and middle gray level area of the picture. ■ ■ ■ Adjust the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures. This feature is disabled in “Picture Mode-Vivid, C i n e m a, I n t e l l i g e n t Sensor(For LCD TV)”. Makes video clips recorded in film look more natural by eliminating judder effect. DVD and Blu-ray movies are filmed at 24 frames per second. With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect. High: Provides smoother picture movement. Low: Provides smooth picture movement. Use this setting for standard use. Off: Use this setting when "High" and "Low" setting result in noise. ■ TruMotion120Hz provides even better quality for movies than 3:2 PullDown conversions. ■ TruMotion can reduce the perception of blur on fast moving scenes by displaying 120 images per second. ■ It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. ■ TruMotion120Hz works with all inputs except PC mode. ■ If you enable "TruMotion 120Hz", noise may appear on the screen. If this occurs, set "TruMotion 120Hz" to "Off". Color Gamut Standard: Displays standard color area. Wide: Mode to use and set the rich color area of the display. ■ Maximize the utilization of color to increase color quality. Edge Enhancer ■ Show clearer and distinctive yet natural corners of the video. Color Standard ■ Convert the color of a different video to HD color. Color Filter ■ ■ xvYCC Expert Pattern ■ ■ ■ ■ This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately. This is the function to express richer color. This feature represents rich color as much as conventional video signal. This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted through HDMI. This is the pattern necessary for expert adjustment. This function is enabled in "Picture Mode - Expert" when you watch DTV. This is the function to adjust the overall color of the screen to the feeling you want. a. Method : 2 Points - Pattern: Inner, Outer - Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 - +50. LCD TV b. Method : 10 Point IRE - Pattern: Inner, Outer - IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting. - Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE. - Red/Green/Blue: The adjustment range is -50 - +50. Plasma TV b. Method : 20 Point IRE - IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting. - Red/Green/Blue: The adjustment range is -50 - +50. ■ PICTURE CONTROL White Balance As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow). Color difference may not be distinctive even when you make the adjustments for the Color Management System general video. Adjusts Red/Green/Blue/Yellow/Cyan, Magenta. - Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 - +30. - Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30. - This feature is disable in RGB-PC and HDMI-PC mode. ■ OPC *This feature is not available for all models. ■ As the technology to reduce the power consumption while keeping the same brightness, this has the effect of reducing power consumption, improvement in contrast. 99 PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption by lowering the backlight level. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture M o d e. PICTURE Aspect Ratio Move Enter Aspect Ratio : 16:9 Enter : 16:9 Energy Saving : Off Energy Saving : Off Picture Mode : Standard : Standard • Backlight 70 90 • Backlight Auto 70 • Contrast Off90 Intelligent Sensor • Contrast • Brightness 50 • BrightnessMinimum 50 Minimum • Sharpness 70 • Sharpness Medium 70 Medium PICTURE CONTROL High Off Maximum Maximum Screen off LCD TV 1 MENU Select PICTURE. ■ ■ ENTER ENTER Select Energy Saving. Plasma TV: Select Intelligent Sensor, O f f, Minimum, Medium, or Maximum. ■ *When selecting I ntelligent Sensor ■ Select L o w, Middle, or H i g h. LCD TV: Select Auto, O f f, Minimum, Medium, Maximum, or Screen Off. 4RETURN MENU 100 Move Picture Wizard Picture Wizard Picture Mode PICTURE Return to the previous menu. Return to TV viewing. Plasma TV When selecting Screen off, TV turned off after 3 seconds. If you adjust “Energy Saving-Auto (For LCD TV), M i n i m u m, M e d i u m, Maximum”, Backlight feature will not work. When selecting A u t o, B a c k l i g h t is automatically adjusted through Intelligent sensor according to the surrounding conditions (For LCD TV). Press the ENERGY SAVING button repeatedly to select the appropriate Energy Saving setup. PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE Enter Move • Contrast 50 • Contrast 50 • Brightness 50 ? All picture • Sharpness 50 settings will be resetted. Continue? • Color 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint • Tint 0 R Resetting video configuration... • Advanced Control Yes • Advanced Control No • Picture Reset Screen (RGB-PC) Select PICTURE. ENTER Select Picture Reset. ENTER Select Y e s. • Picture Reset Screen (RGB-PC) PICTURE CONTROL 1 MENU Enter ENTER 5 MENU Initialize the adjusted value. Return to TV viewing. 101 PICTURE CONTROL THX MEDIA DIRECTOR - For Plasma TV OPTION Move Enter : English Menu Language : English Audio Language : English Audio Language : English Input Label THX Media Director : Off Off SIMPLINK : On SIMPLINK : On On Key Lock : Off Key Lock : Off Simple Manual Caption : Off PICTURE CONTROL Select OPTION. ENTER Select THX Media Director. ENTER Select O n or O f f. MENU 102 Enter THX Media Director : Off Simple Manual 4RETURN Move Menu Language Input Label 1 MENU OPTION Return to the previous menu. Return to TV viewing. Caption : Off IMAGE STICKING MINIMIZATION (ISM) METHOD - For Plasma TV A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image. OPTION Move OPTION Enter Move SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off Set ID :1 Set ID :1 ISM Method Demo Mode Initial Setting Enter ISM Method : Off : Home Use Standby Light Demo Mode : Off Initial Setting Power : Home Use Light On On Close Select OPTION. ■ ENTER Select ISM Method. ■ ENTER Select Normal, Orbiter, Color Wash, or White Wash. 4RETURN MENU ■ Return to the previous menu. Return to TV viewing. ■ Normal: If image sticking is never a problem, ISM is not necessary - set to Normal. O r b i t e r: Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 minutes. Color Wash: The color block with the screen moved a little and the white pattern are alternately displayed. It is difficult to see the after image on all colors. Once it has been corrected it will not be visible in any color. W h i t e W a s h: White Wash removes ghost images from the screen. Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own. PICTURE CONTROL 1 MENU ! NOTE An excessive ghosted image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. 103 PICTURE CONTROL POWER INDICATOR - For LCD TV Adjust the power/standby indicator light of TV front. OPTION Move Enter OPTION Move SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off Set ID :1 Set ID :1 Power Indicator Demo Mode Initial Setting Enter Power Indicator : Off : Home Use Standby Light Demo Mode : Off Initial Setting Power : Home Use Light On On Close PICTURE CONTROL 1 MENU Select OPTION. ■ ENTER Select Power Indicator. ■ ENTER Select Standby Light or Power Light. Select your desired options. 5RETURN MENU 104 Return to the previous menu. Return to TV viewing. Standby Light: Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode. Power Light: Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on. DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION Move Enter OPTION Move Enter SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off Set ID :1 Set ID :1 Power Indicator Power Indicator Off Demo Mode : Off Demo Mode : On Initial Setting : Store Demo Initial Setting On : Store Demo Off On (LED On) LCD TV On (LED Off) Plasma TV Select OPTION. ■ ■ ENTER ENTER 4 MENU Select Demo Mode. ■ This feature is disabled in “I n i t i a l Setting-Home Use”. LED On: ? LED Off: ? PICTURE CONTROL 1 MENU Plasma TV: Select LED On or L E D O f f to show the various feature of the TV. LCD TV: Select O n to show the various feature of the TV. Return to TV viewing. After a while, Demo Mode starts. If you want to stop the demo, press any button (Except VOL +, - and MUTE button). 105 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program. AUDIO Move : Off Auto Volume : On Clear Voice II : Off Clear Voice II : Off Balance Sound Mode SOUND & LANGUAGE CONTROL 106 Balance : Standard • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select AUDIO. Select Auto Volume. ENTER Select O n or O f f. MENU On • SRS TruSurround XT: Off ENTER 4RETURN Enter Off • Level Sound Mode : Standard Move Auto Volume • Level 1 MENU AUDIO Enter Return to the previous menu. Return to TV viewing. CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move Auto Volume : Off Clear Voice II : Off Auto Volume Clear Voice II • Level Balance Sound Mode AUDIO Enter Enter Off On : Standard • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select AUDIO. ENTER Select Clear Voice II. ENTER Select O n or O f f. Adjustment for Clear Voice Level With selecting O n ENTER Select Level. ENTER Make appropriate adjustments. SOUND & LANGUAGE CONTROL Balance • SRS TruSurround XT: Off 1 MENU : On • Level Sound Mode : Standard Move : Off 6RETURN MENU Return to the previous menu. Return to TV viewing. 107 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. AUDIO Move Auto Volume : Off Clear Voice II : Off • Level Balance Sound Mode AUDIO Enter Move Auto Volume : Off Clear Voice II : Off • Level Balance Sound Mode : Standard Enter : Standard • Treble 50 Standard • SRS TruSurround XT: Off • Treble 50 Music • Bass 50 • Bass • SRS TruSurround XT: Off 50 Cinema Sport Game SOUND & LANGUAGE CONTROL 1 MENU ENTER ENTER 4RETURN MENU Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport, or Game. Return to the previous menu. ■ ■ ■ ■ ■ ■ Return to TV viewing. ■ 108 Standard, Music, Cinema, Sport, and G a m e are preset for optimum sound quality at the factory. You can also adjust Sound Mode in the Q.MENU. S t a n d a r d: Offers standard-quality sound. Music: Optimizes sound for listening to music. Cinema: Optimizes sound for watching movies. Sport: Optimizes sound for watching sports events. G a m e: Optimizes sound for playing games. SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Enter AUDIO Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off • Level Balance Sound Mode : Standard • Level Balance Sound Mode • Treble 50 • Bass 50 ENTER Select Sound Mode. 6RETURN Select Standard, Music, Cinema, Sport, or Game. ENTER Select Treble or Bass. • SRS TruSurround XT Select AUDIO. ENTER ENTER MENU 50 Off 50 Close Make appropriate adjustments. Return to the previous menu. Return to TV viewing. SRS TRUSURROUND XT Select this option to sound realistic. 1 MENU Select AUDIO. ■ ENTER Select SRS TruSurround XT. ENTER Select O n or O f f. ■ ■ 4RETURN MENU SOUND & LANGUAGE CONTROL • SRS TruSurround XT: Off • Treble • Treble 50 • Bass • Bass 50 : Standard Enter • SRS TruSurround XT: Off 1 MENU Move AUDIO Return to the previous menu. If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments. If you select “Clear Voice II-On”, S R S TruSurround XT feature will not work. SRS TruSurround XT: TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Return to TV viewing. 109 SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : Off Clear Voice II : Off • Level Balance SOUND & LANGUAGE CONTROL 4RETURN MENU 110 Clear Voice II : Off • Level Balance Balance : Standard • SRS TruSurround XT: Off 50 • Treble 50 • Bass 50 • Bass 50 Select AUDIO. Select Balance. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. Enter • Treble ENTER : Off • SRS TruSurround XT: Off ENTER Move Auto Volume Sound Mode : Standard 1 MENU AUDIO Sound Mode Enter Close AUDIO TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. In A V, Component, R G B and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers. AUDIO Move Enter AUDIO Move Sound Mode • Level Balance : Standard • Level Balance Sound Mode : Standard • SRS TruSurround XT: Off • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset TV Speaker Enter : On • Reset TV Speaker : On Off On Select AUDIO. ENTER Select TV Speaker. ENTER Select O n or O f f. 4RETURN MENU Return to the previous menu. SOUND & LANGUAGE CONTROL 1 MENU Return to TV viewing. 111 SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Enter AUDIO Move Sound Mode • Level Balance : Standard • Level Balance Sound Mode • Treble 50 • Bass 50 SOUND & LANGUAGE CONTROL 112 1 MENU ENTER Select AUDIO. Select Reset. ENTER 4 MENU Initialize the adjusted value. Return to TV viewing. • SRS TruSurround XT: Off • Reset : On : Standard • SRS TruSurround XT: Off TV Speaker Enter • Treble 50 Resetting audio configuration... • Bass 50 • Reset TV Speaker : On STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Multi Audio English 1Q. MENU Digital TV Select S A P. Select Mono, Stereo, or S A P. 3Q. MENU 1Q. MENU Select Multi Audio. Select other languages. SOUND & LANGUAGE CONTROL Analog TV 3Q. MENU Return to TV viewing. Return to TV viewing. 113 SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Enter : English Menu Language : English : English Audio Language : EnglishEnglish Input Label Input Label THX Media Director : Off THX Media Director : Off SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off : Off SOUND & LANGUAGE CONTROL 4RETURN MENU 114 Select OPTION. Select Audio Language. ENTER Select your desired language. Return to the previous menu. Return to TV viewing. Spanish Simple Manual ENTER Enter Audio Language Caption Move Menu Language Simple Manual 1 MENU OPTION Caption : Off French ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter Menu Language Audio Language : English Audio Language Input Label THX Media Director : Off SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off : Off ENTER 4RETURN MENU Select OPTION. Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Caption : Off SOUND & LANGUAGE CONTROL Français Simple Manual Caption ENTER Enter : English English : English Español THX Media Director : Off Simple Manual Move : English Input Label 1 MENU OPTION Menu Language Return to the previous menu. Return to TV viewing. 115 SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when Caption Mode is set O n. OPTION Move Enter OPTION : English Menu Language : English Audio Language : English Audio Language : English Input Label THX Media Director : Off THX Media Director : Off SIMPLINK SIMPLINK : On : Off Simple Manual Key Lock : Off SOUND & LANGUAGE CONTROL ■ ENTER Select Caption. ■ ENTER Select O n. ■ Select C C 1-4 or Text1-4. 116 Return to the previous menu. Return to TV viewing. Mode On CC1 Digital Option : CC1 Select OPTION. MENU : Off Caption 5RETURN : On Simple Manual Caption Enter Input Label Key Lock 1 MENU Move Menu Language Close When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Menu Language : English Menu Language : English Audio Language : English Audio Language : English Input Label Enter Input Label THX Media Director : Off THX Media Director : Off SIMPLINK : On SIMPLINK Key Lock : Off Key Lock Simple Manual Simple Manual Caption : Off Caption : On : Off On Mode CC1 : CC1 Digital Option Close Select OPTION. ENTER Select Caption. ENTER Select O n. SOUND & LANGUAGE CONTROL 1 MENU Select C C 1-4, Text1-4, or Service1 - 6. 5RETURN MENU Return to the previous menu. Return to TV viewing. 117 SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Enter Menu Language : English Menu Language : English Audio Language : English Audio Language : English Input Label Input Label THX Media Director : Off THX Media Director : Off SIMPLINK : On SIMPLINK Key Lock : Off Key Lock Simple Manual Simple Manual Caption : Off On : On Mode CC1 : Off Digital Option Caption : CC1 Close Custom Size A Standard Font Font 1 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black Close SOUND & LANGUAGE CONTROL 1 MENU Select OPTION. ■ ■ ENTER Select Caption ENTER Select O n. ■ ■ ■ Select Digital Option. ■ ENTER Select Custom. ■ ■ Customize the S i z e, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. 7RETURN MENU 118 Return to the previous menu. Return to TV viewing. S i z e: Set the word size. Font: Select a typeface for the text. Text Color: Choose a color for the text. Text Opacity: Specify the opacity for the text color. Bg (Background) Color: Select a background color. Bg (Background) Opacity: Select the opacity for the background color. Edge Type: Select an edge type. Edge Color: Select a color for the edges. TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME Move Enter Clock Off Time TIME Move Clock : Off Off Time Enter Auto On Time : Off On Time : Off Month : Off Sleep Timer : Off Sleep Timer Date : Off 21 Year 2009 Hour 10 AM 02 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU ENTER Select Clock. ENTER Select Auto. TIME SETTING Select T IM E. Select your viewing area time zone. • U.S.A: E a s t e r n, C e n t r a l, M o u n t a i n, Pacific, Alaska, or Hawaii. • Canada: Eastern, Central, Mountain, Pacific, New F.land, or Atlantic. Select Auto, O f f, or O n (depending on whether or not your viewing area observes Daylight Saving time). 6RETURN MENU Return to the previous menu. Return to TV viewing. 119 TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function. TIME Move Enter Clock TIME Move Enter Clock Manual : Off Off Time : Off Month On Time : Off On Time : Off Date 21 Sleep Timer : Off Sleep Timer : Off Year 2009 Hour 10 AM 02 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU TIME SETTING Select Clock. ENTER Select Manual. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. 6RETURN MENU 120 Select T I M E. ENTER Off Time Return to the previous menu. Return to TV viewing. AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode. TIME Move TIME Enter Clock Move Feb. 21, 2009 10:10 AM Clock Off Time : Off Off Time On Time : Off On Time Sleep Timer : Off Sleep Timer Enter : Off Repeat : 6:30 AM (Once) Hour : Off Minute Once 6 AM 30 Input TV Channel TV 2-0 Volume 30 Close 1 MENU Select T IM E. ■ ■ ENTER Select Off Time or On Time. ENTER Select Repeat. ENTER Select Input. Select O f f, O n c e, Daily, M o n .~F r i ., Mon .~S a t ., S a t .~ S u n ., or S u n .. Select the desired input source. Select and set Hour or Minute. 6RETURN MENU TIME SETTING To cancel On/Off Time function, select O f f. Only for On Time function When Selecting T V: set the channel at turn-on. Adjust to sound level at turn-on. Return to the previous menu. Return to TV viewing. 121 TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Move Enter Clock TIME Move Enter Clock Off Time : Off Off Time : Off Off On Time : Off On Time : Off 10 min. Sleep Timer : Off Sleep Timer : Off 20 min. 30 min. 60 min. 90 min. 120 min. 180 min. 240 min. 1 MENU ENTER Select Sleep Timer. TIME SETTING ■ ■ ■ ENTER 4RETURN MENU 122 Select T I M E. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. To cancel the Sleep Timer, select O f f. You can also adjust Sleep Timer in the Q.MENU. Press the SLEEP button repeatedly to select the number of minutes. PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-tovideo movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies: TV-G (General audience) ■ TV-PG (Parental guidance suggested) ■ TV-14 (Parents strongly cautioned) ■ TV-MA (Mature audience only) (All children) ■ TV-Y ■ TV-Y7 (Children 7 years older) ■ SET PASSWORD & LOCK SYSTEM Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA For Canada LOCK Move Lock System Enter : Off LOCK Lock System Move Enter : Off Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Downloadable Rating Input Block Enter Password Close PARENTAL CONTROL / RATING Setting up Your Password Input Block 1 MENU ENTER Select L O C K. ■ ■ ABC GHI JKL PQRS TUV Enter the password as requested. The TV is set up with the initial password “0-0-0-0”. DEF MNO Input the password. WXYZ 123 PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU ABC GHI JKL PQRS TUV Enter : Off Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password. PARENTAL CONTROL / RATING 124 Select Lock System. ENTER 5RETURN MENU : On Set Password WXYZ Move Lock System Set Password DEF MNO LOCK Select O n or O f f. Return to the previous menu. Return to TV viewing. ■ Enter Off On When you select O n, the Lock System is enable. Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 MENU ABC GHI JKL PQRS TUV Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Move Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter : Off New Confirm Close Select L O C K. DEF MNO Input the password. WXYZ Select Set Password. ENTER GHI PQRS ABC JKL TUV 5RETURN MENU DEF MNO WXYZ Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Return to the previous menu. Return to TV viewing. PARENTAL CONTROL / RATING 125 PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Ch. Change Navigation CH Page Change Previous Block/Unblock 1 MENU ABC GHI JKL PQRS TUV ENTER Select L O C K. DEF MNO Input the password. WXYZ Select Block Channel. PARENTAL CONTROL / RATING 126 ENTER Select a channel to block or unblock. Block or unblock a channel. 6RETURN MENU Return to the previous menu. Return to TV viewing. ■ If a channel is locked, enter the password to unlocked it temporarily. MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System 1 MENU ABC GHI JKL PQRS TUV : Off Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password. WXYZ Select Movie Rating. ENTER 5RETURN MENU Select G, P G, PG-13, R, NC-17, X, or Blocking Off. Return to the previous menu. Return to TV viewing. PG PG-13 NC-17 Blocking Off If M o v i e R a t i n g , T V R a t i n g Children or TV Rating-General is locked, enter the password to unlocked it temporarily. ■ G (General audience) ■ PG (Parental guidance suggested) ■ PG-13 (Parents strongly cautioned) ■ R (Restricted) ■ NC-17 (No one 17 and under admitted) ■ X (Adult only) ■ Blocking Off (Permits all programs) G If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. ■ PARENTAL CONTROL / RATING : Off Set Password DEF MNO Lock System 127 PARENTAL CONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. LOCK Move Lock System 1 MENU Enter : Off LOCK Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. ■ ABC GHI JKL PQRS TUV DEF MNO Input the password. WXYZ PARENTAL CONTROL / RATING Select TV Rating-Children. ENTER Select A g e or Fantasy Violence. ENTER Select block options. 6RETURN MENU 128 Return to the previous menu. Return to TV viewing. Enter : Off Set Password ■ Move Lock System Age Fantasy Violence Close Age (applies to TV-Y, TV-Y7) Fantasy Violence (applies to TV-Y7) TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Lock System Enter : Off LOCK Move Lock System Enter : Off Set Password Set Password Block Channel Block Channel Age Movie Rating Movie Rating Dialogue TV Rating-Children TV Rating-Children Language TV Rating-General TV Rating-General Sex Downloadable Rating Downloadable Rating Violence Input Block Input Block Close 1 MENU ABC GHI JKL PQRS TUV ENTER Select L O C K. DEF MNO Input the password. ■ ■ WXYZ ■ ■ ■ ENTER Select A g e, Dialogue, Language, S e x or Violence. ENTER 6RETURN MENU Select block options. Return to the previous menu. PARENTAL CONTROL / RATING Select TV Rating-General. Age (applies to TV-G,TV-PG,TV-14,TVMA). Dialogue-sexual dialogue (applies to TV-PG,TV-14). Language-adult language (applies to TV-PG, TV-14, TV-MA). Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). Violence (applies to TV-PG, TV-14, TVMA). Return to TV viewing. 129 PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. LOCK Move Lock System Enter : Off LOCK Lock System Move : Off Enter Blocking off : Permits all programs Set Password Set Password Block Channel Block Channel C8+ TV Rating-English TV Rating-English TV Rating-French TV Rating-French PG Downloadable Rating Downloadable Rating 14+ Input Block Input Block 18+ Blocking Off 1 MENU ABC GHI JKL PQRS TUV ENTER Select L O C K. ■ DEF MNO Input the password. WXYZ PARENTAL CONTROL / RATING 130 ■ Select TV Rating-English. ■ ■ ENTER Select E, C, C8+, G, P G, 14+, 18+, or Blocking Off. ■ ■ 5RETURN ■ Return to the previous menu. ■ ■ MENU Return to TV viewing. If TV Rating-English or TV RatingFrench is locked, enter the password to unlocked it temporarily. E (Exempt) C (Children) C8+ (Children eight years and older) G (General programming, suitable for all audiences) PG (Parental Guidance) 14+ (Viewers 14 years and older) 18+ (Adult programming) Blocking Off (Permits all programs) TV Rating French - For CANADA Selecting Canadian French rating system. LOCK Move Lock System Enter : Off LOCK Move Lock System : Off Enter Blocking off : Permits all programs Set Password Set Password Block Channel Block Channel 8ans+ TV Rating-English TV Rating-English 13ans+ TV Rating-French TV Rating-French 16ans+ Downloadable Rating Downloadable Rating 18ans+ Input Block Input Block Blocking Off 1 MENU ENTER Select L O C K. ■ ■ ABC GHI JKL PQRS TUV ■ DEF MNO Input the password. WXYZ ■ Select TV Rating-French. ENTER 5RETURN MENU Select E, G, 8ans+, 13ans+, 16ans+, 18ans+, or Blocking off. Return to the previous menu. Return to TV viewing. ■ ■ PARENTAL CONTROL / RATING ■ E (Exempt) G (General) 8ans+ (General-Not convenient for little children) 13ans+ (Not convenient for children of 13 years and younger) 16ans+ (Not convenient for children of 16 years and younger) 18ans+ (This programs is only for adults) Blocking off (Permits all programs) 131 PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. Move Lock System Enter : Off LOCK Move Lock System Enter : Off LOCK Set Password Set Password Block Channel Block Channel Humor Movie Rating Movie Rating Sport TV Rating-Children TV Rating-Children Cruelty TV Rating-General TV Rating-General Language Downloadable Rating Downloadable Rating Sadness Input Block Input Block Genre Age Close ■ 1 MENU PARENTAL CONTROL / RATING ABC GHI JKL PQRS TUV Select L O C K. DEF MNO Input the password. WXYZ Select Downloadable Rating. ENTER Select desired Downloadable Rating option. ENTER Select desired option and block it. 6RETURN MENU 132 ENTER Return to the previous menu. Return to TV viewing. ■ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. If a Downloadable rating is locked, enter the password to unlocked it temporarily. EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Lock System Enter : Off LOCK Lock System Move : Off AV1 Enter Off AV2 Off Set Password Set Password Component1 Off Block Channel Block Channel Component2 Off Movie Rating Movie Rating RGB-PC Off TV Rating-Children TV Rating-Children HDMI1 Off TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating HDMI2 Off HDMI3 Off HDMI4 Off Input Block Input Block Close 1 MENU ABC GHI JKL PQRS TUV ENTER Select L O C K. DEF MNO Input the password. WXYZ Select Input Block. ENTER Select input source. Select O n or O f f. 6RETURN MENU Return to the previous menu. PARENTAL CONTROL / RATING Return to TV viewing. 133 APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work *This feature is not available for all models. Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Power interrupted. ■ TV will be automatically turned off, in case of no signal for 15 minutes. ■ The video does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. ■ Is the power cord inserted into wall power outlet? ■ Check your antenna direction and/or location. ■ Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in. ■ ■ No picture &No sound Picture appears slowly after switching on ■ This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. Adjust Color in menu option. ■ Keep a sufficient distance between the product and the VCR. ■ Try another channel. The problem may be with the broadcast. ■ Are the video cables installed properly? ■ Activate any function to restore the brightness of the picture. ■ APPENDIX No or poor color or poor picture Horizontal/vertical bars or picture shaking ■ Check for local interference such as an electrical appliance or power tool. Station or cable product experiencing problems, tune to another station. ■ Station signal is weak, reorient antenna to receive weaker station. ■ Check for sources of possible interference. ■ Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI 134 ■ Check antenna (Change the direction of the antenna). ■ Check HDMI cable over version 1.3. The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. The audio does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. Unusual sound from inside the product No sound when connecting HDMI/USB Check HDMI cable over version 1.3. Check USB cable over version 2.0. ■ Use normal MP3 file. *This feature is not available for all models. ■ ■ There is a problem in PC mode. (Only PC mode applied) The signal is out of range Screen color is unstable or single color Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. ■ Work the Auto configure or adjust clock, phase, or H/V position. (Option) ■ Check the signal cable. Reinstall the PC video card. ■ APPENDIX Vertical bar or stripe on background & Horizontal Noise & Incorrect position ■ ■ 135 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. ■ Please be sure not to use a wet cloth. ■ Extended Absence CAUTION APPENDIX 136 If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. PRODUCT SPECIFICATIONS MODELS 60PS80 (60PS80-UA) Dimensions (Width x Height x Depth) With stand 48.4 x 32.9 x 12.2 inches 1228.0 x 835.8 x 309.0 mm 57.7 x 38.6 x 15.5 inches 1465.4 x 982.6 x 395.5 mm Without stand 48.4 x 31.3 x 3.1 inches 1228.0 x 795.1 x 78.9 mm 57.7 x 36.5 x 3.2 inches 1465.4 x 926.7 x 82.1 mm Weight With stand Without stand 84.4 lbs / 38.3 kg 75.6 lbs / 34.3 kg 115.5 lbs / 52.4 kg 102.7 lbs / 46.6 kg 42LH50 (42LH50-UA) 47LH50 (47LH50-UA) 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm 46.1 x 31.0 x 13.2 inches 1173.4 x 789.7 x 337.4 mm Without stand 41.5 x 25.8 x 3.5 inches 1052.2 x 657.3 x 90.8 mm 46.1 x 28.4 x 3.9 inches 1173.4 x 723.4 x 100.8 mm With stand Without stand 41.8 lbs / 19.0 kg 37.9 lbs / 17.2 kg 51.5 lbs / 23.4 kg 45.8 lbs / 20.8 kg MODELS Dimensions (Width x Height x Depth) Weight With stand Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104°F (0 ~ 40°C) Less than 80% -4 ~ 140°F (-20 ~ 60°C) Less than 85% The specifications shown above may be changed without prior notice for quality improvement. APPENDIX Environment condition ■ 50PS80 (50PS80-UA) 137 APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 T1 ■ Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Repeat code ■ Tf Lead code 9 ms 4.5 ms APPENDIX ■ Repeat code 0.55 ms 9 ms ■ 2.25 ms Bit description Bit ”0” Bit ”1” 0.56 ms 0.56 ms 2.24 ms 1.12 ms ■ Frame interval: Tf The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 138 Code (Hexa) Function Note Code (Hexa) 08 POWER Remote control Button (Power On/Off) D6 45 Q.MENU Remote control Button 43 MENU Remote control Button 0B INPUT Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash)/LIST Remote control Button 1A FLASHBK Remote control Button 09 MUTE/DELETE Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Button 00 CH Remote control Button 01 CH Remote control Button 1E FAV/MARK/ CHAR/NUM Remote control Button 40 Remote control Button 41 Remote control Button 07 Remote control Button 06 Remote control Button ENTER Remote control Button 28 RETURN Remote control Button 79 RATIO Remote control Button FREEZE Remote control Button 95 ENERGY SAVING Remote control Button 7E SIMPLINK Remote control Button AA INFO Remote control Button 30 AV MODE Remote control Button 58 WIDGETS Remote control Button 59 NETCAST Remote control Button 72 RED Remote control Button 71 GREEN Remote control Button 63 YELLOW (G) Remote control Button 61 BLUE (l l) Remote control Button B1 Remote control Button B0 Remote control Button BA ll Remote control Button 8F FF Remote control Button 8E GG Remote control Button TV Note Discrete IR Code (TV Input Selection) C4 POWER ON Discrete IR Code (Only Power On) C5 POWER OFF Discrete IR Code (Only Power Off) 5A AV1 Discrete IR Code (AV1 Input Selection) D0 AV2 Discrete IR Code (AV2 Input Selection) BF COMPONENT1 Discrete IR Code (Component1 Input Selection) D4 COMPONENT2 Discrete IR Code (Component2 Input Selection) D5 RGB-PC Discrete IR Code (RGB-PC Input Selection) CE HDMI1 Discrete IR Code (HDMI1 Input Selection) CC HDMI2 Discrete IR Code (HDMI2 Input Selection) E9 HDMI3 Discrete IR Code (HDMI3 Input Selection) DA HDMI4 Discrete IR Code (HDMI4 Input Selection) 76 Ratio 4:3 Discrete IR Code (Only 4:3 Mode) 77 Ratio 16:9 APPENDIX 44 Function Discrete IR Code (Only 16:9 Mode) AF Ratio Zoom Discrete IR Code (Only Zoom Mode) 139 APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.e) /DVI IN AV IN 1 RGB IN (PC) VIDEO L (MONO) AUDIO R AUDIO IN OPTICAL DIGITAL AUDIO OUT (RGB/DVI) PC VIDEO AUDIO COMPONENT IN RS-232C IN (CONTROL&SERVICE) ANTENNA/ CABLE IN Type of Connector; D-Sub 9-Pin Male No. Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code ■ Use a crossed (reverse) cable. ■ Pin Name ■ APPENDIX 140 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) ! NOTE No Connection This product has command echo back in the RS-232C Command. RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. OPTION Move Enter OPTION : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Caption : Off Caption : Off Set ID :1 Set ID :1 ISM Method ISM Method : Off Demo Mode : Off Initial Setting : Home Use Initial Setting : Home Use Select OPTION. ENTER 4RETURN MENU Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Close APPENDIX Demo Mode ENTER Enter SIMPLINK Simple Manual 1 MENU Move ■ Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 Return to TV viewing. 141 APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode 00 ~ 01 (G p.141) (G p.141) (G p.141) 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 00 ~ 01 COMMAND1 COMMAND2 21. Channel Tuning DATA (Hexadecimal) COMMAND1 COMMAND2 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. ISM Method 19. Energy Saving 20. Auto Configuration 22. Channel Add/Del 23. Key 24. Backlight DATA (Hexadecimal) 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 02 (G p.142) (G p.142) (G p.142) 00 ~ 01 (G p.143) 00 ~ 64 Only LCD TV Model Only Plasma TV Model DATA00 DATA01 DATA02 DATA03 DATA04 DATA05 (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) physical major major low program high program low minor high minor low attribute Transmission / Receiving Protocol Transmission APPENDIX [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol. [DATA] : To transmit the command data. Transmit the ‘FF’ data to read status of command. [Cr] : Carriage Return ASCII code ‘0x0D’ [ ] : ASCII code ‘space (0x20)’ * In this model, TV will not send the status during the standby mode. OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. 142 * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’. [DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’. [OK] : Use the large character. Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’. [DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’. [NG] : Use the large character 01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command: x b) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 21: AV2 Data 40: Component1 Data 41: Component 2 Data 60: RGB-PC Data 90: HDMI1 Data 91: HDMI2 Data 92: HDMI3 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3 09: Just scan 02: 16:9 10: Cinema Zoom1 04: Zoom 06: Set by program 1F: Cinema Zoom16 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) 06. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 07. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 08. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 10. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] APPENDIX 04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen mute off (Picture on), Video-out Mute off Data 01: Screen mute on (Picture off) Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] * In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 143 APPENDIX 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. (For Plasma TV) Transmission [k][l][ ][Set ID][ ][Data][Cr] To avoid having a fixed image remain on screen. Data 00: OSD off Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 19. Energy Saving (Command: j q) Transmission [k][m][ ][Set ID][ ][Data][Cr] To control the energy saving function. Data 00: Lock off Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 15. Bass (Command: k s) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) Data 00: Energy saving - off 01: Energy saving - Minimum 02: Energy saving - Medium 03: Energy saving - Maximum 04: Energy saving - Auto 05: Energy saving - Screen off For LCD TV 10: Intelligent Sensor - Low 11: Intelligent Sensor - Middle For Plasma TV 12: Intelligent Sensor - High Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] 20. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr] Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 21. Channel Tuning (Command: m a) APPENDIX *Refer to ‘Real data mapping’. To tune channel to following physical/major/minor number. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01] 16. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 17. Color Temperature (Command: k u) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Medium 01: Cool 02: Warm Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 144 18. ISM Method (Command: j p) [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. Data5: Main/Sub Picture Two/One Part Channel Using Physical Channel Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved Reserved 0 Main 0 Two 0 Use 1 Sub 1 One 1 No Use The table above lists the binary code which must be converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an NTSC cable channel is “1000 0001”, which translates to “81” in Hex. * 7th bit : For which source do you want to change the channel. * 6th bit: Use a two part or one part channel. Most cases just use 0 since it’s ignored when using NTSC. 22. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 23. Key (Command: m c) To send IR remote control code. * 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn’t matter what the physical number is. Transmission [m][c][ ][Set ID][ ][Data][Cr] * 4th bit: Set to 0. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] * 3-0 bits: Choose signal type. When TV is in the standby mode, TV will turn on by POWER button of remote control only. See page 115. * Tune Command Examples: 1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 24. Backlight (Command: m g) (For LCD TV) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data 05 = 0000 0001 in binary = 01 Data Min:00 ~ Max:64 (*transmit by Hexadecimal code) Total = ma 00 23 00 00 00 00 01 *Refer to ‘Real data mapping’. 2. Tune to the digital (ATSC) local channel 30-3. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] APPENDIX Data 03 & 04 = No Minor = 00 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01] [Data02][Data03][Data04][x][a][ ][Set ID] [ ][NG][Data00][x] 145 APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other free software foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. APPENDIX To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. 146 GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the output from the program is covered only if its contents constitute a work based on the program (independent of having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and give any other recipients of the program a copy of this license along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. 2. You may modify your copy or copies of the program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions: Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this license. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the program. 3. You may copy and distribute the program (or a work based on it, under section 2) in object code or executable form under the terms of sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the program (or any work based on the program), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the program or works based on it. APPENDIX In addition, mere aggregation of another work not based on the program with the Program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) 6. Each time you redistribute the program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this license. 147 APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute so as to satisfy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the program at all. For example, if a patent license would not permit royalty-free redistribution of the program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the program. any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any version ever published by the Free Software Foundation. 10.If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. APPENDIX This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the program under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of 148 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C)This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under certain conditions; type ‘show c’ for details. The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this license. APPENDIX 149 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. APPENDIX When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. 150 To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this license”). Each license is addressed as "you". A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. “Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the library does and what the program that uses the library does. 1. You may copy and distribute verbatim copies of the library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the library, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the library, the distribution of the whole must be on the terms of this license, whose permissions for other licenses extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the library. APPENDIX The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.) 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. In addition, mere aggregation of another work not based on the library with the library (or with a work based on the library) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 151 APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the library into a program that is not a library. 4. You may copy and distribute the library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. APPENDIX 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this license. However, linking a “work that uses the library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the library), rather than a “work that uses the library”. The executable is therefore covered by this license. Section 6 states terms for distribution of such executable. When a “work that uses the library” uses material from a header file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be linked without the library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessories, and small macros and small inline functions (ten lines or less in length), then the use of 152 the object file is unrestricted, regardless of whether it is legally a derivative work. (Executable containing this object code plus portions of the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of Section 6. Any executable containing that work also fall under Section 6, whether or not they are linked directly with the library itself. 6. As an exception to the sections above, you may also combine or link a "work that uses the library" with the library to produce a work containing portions of the library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the library is used in it and that the Library and its use are covered by this license. You must supply a copy of this license. If the work during execution displays copyright notices, you must include the copyright notice for the library among them, as well as a reference directing the user to the copy of this license. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the library and then relink to produce a modified executable containing the modified library. (It is understood that the user who changes the contents of definitions files in the library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the library together in an executable that you distribute. 7. You may place library facilities that are a work based on the library side-by-side in a single library together with other library facilities not covered by this license, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the accompanying uncombined form of the same work. 9. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the library or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library (or any work based on the library), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the library or works based on it. 10.Each time you redistribute the library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute so as to satisfy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the library at all. For example, if a patent license would not permit royalty-free redistribution of the library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a license cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 12.If the distribution and/or use of the library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the library under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. APPENDIX 8. You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the library is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. of the rights granted herein. You are not responsible for enforcing compliance by third parties with this license. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library specifies a version number of this license which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. 153 APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. one line to give the library's name and a brief idea of what it does. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the license, or (at your option) any later version. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. APPENDIX 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). 154 This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2. “Contributor version” means the combination of the original code, prior modifications used by a contributor, and the modifications made by that particular contributor. 1.3. “Covered code” means the original code or modifications or the combination of the original code and modifications, in each case including portions thereof. 1.4. “Electronic distribution mechanism” means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. “Executable” means covered code in any form other than source code. “Initial developer” means the individual or entity identified as the initial Developer in the Source Code notice required by exhibit A. 1.7. “Larger work” means a work which combines covered code or portions thereof with code not governed by the terms of this License. 1.8. “License” means this document. 1.8.1. “Licensable” means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. “Modifications” means any addition to or deletion from the substance or structure of either the original code or any previous modifications. When covered code is released as a series of files, a modification is: A. Any addition to or deletion from the contents of a file containing original code or previous modifications. B. Any new file that contains any part of the original code or previous modifications. 1.11. “Source code” means the preferred form of the covered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code differential comparisons against either the original code or another well known, available covered code of the contributor's choice. The source code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge. 1.12. “You” (or “Your”) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this license or a future version of this license issued under section 6.1. For legal entities, “You” includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, “control” means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity. 2. Source Code License. 2.1. APPENDIX 1.6. 1.10.1.“Patent claims” means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent licensable by grantor. The initial developer grant. The initial developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims: a) under intellectual property rights (other than patent or trademark) licensable by initial developer to use, reproduce, modify, display, perform, sublicense and distribute the original code (or portions thereof) with or without modifications, and/or as part of a larger work; and (b) under patents claims infringed by the making, using or selling of original code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the original code (or portions there of). 1.10. “Original code” means source code of computer software 155 APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. APPENDIX 3. Distribution Obligations. 156 3.2. Availability of source code. Any modification which you create or to which you contribute must be made available in source code form under the terms of this license either on the same media as an executable version or via an accepted electronic distribution mechanism to anyone to whom you made an executable version available; and if made available via electronic distribution mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular modification has been made available to such recipients. You are responsible for ensuring that the source code version remains available even if the electronic distribution mechanism is maintained by a third party. 3.3. Description of modifications. You must cause all covered code to which you contribute to contain a file documenting the changes You made to create that covered code and the date of any change. You must include a prominent statement that the modification is derived, directly or indirectly, from original code provided by the initial developer and including the name of the initial developer in (a) the source code, and (b) in any notice in an executable version or related documentation in which you describe the origin or ownership of the covered code. 3.4. Intellectual property matters (a) Third party claims. If contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such contributor under sections 2.1 or 2.2, contributor must include a text file with the source code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If contributor obtains such knowledge after the modification is made available as described in section 3.2, contributor shall promptly modify the LEGAL file in all copies contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the covered code that new knowledge has been obtained. (b) Contributor APIs. If contributor's modifications include an application programming interface and contributor has knowledge of patent licenses which are reasonably necessary to implement that API, contributor must also include this information in the LEGAL file. Contributor Grant. Subject to third party intellectual property claims, each contributor hereby grants You a world-wide, royalty-free, non-exclusive license (a) under intellectual property rights (other than patent or trademark) licensable by contributor, to use, reproduce, modify, display, perform, sublicense and distribute the modifications created by such contributor (or portions thereof) either on an unmodified basis, with other modifications, as covered code and/or as part of a larger work; and (b) under patent claims infringed by the making, using, or selling of modifications made by that contributor either alone and/or in combination with its contributor version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) modifications made by that contributor (or portions thereof); and 2) the combination of modifications made by that contributor with its contributor version (or portions of such combination). (c) the licenses granted in sections 2.2(a) and 2.2(b) are effective on the date contributor first makes commercial use of the covered code. (d) Notwithstanding section 2.2(b) above, no patent license is granted: 1) for any code that contributor has deleted from the contributor version; 2) separate from the contributor version; 3) for infringements caused by: i) third party modifications of contributor version or ii) the combination of modifications made by that contributor with other software (except as part of the contributor version) or other devices; or 4) under patent claims infringed by covered code in the absence of modifications made by that contributor. 3.1. You may not offer or impose any terms on any source code version that alters or restricts the applicable version of this license or the recipients' rights hereunder. However, you may include an additional document offering the additional rights described in section 3.5. Application of license. The modifications which You create or to which you contribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only under the terms of this license or a future version of this license released under section 6.1, and you must include a copy of this license with every copy of the source code you distribute. 3.5. 3.6. (c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A. you must also duplicate this license in any documentation for the source code where You describe recipients' rights or ownership rights relating to covered code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of covered code. However, you may do so only on your own behalf, and not on behalf of the Initial developer or any contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by you alone, and You hereby agree to indemnify the Initial developer and every contributor for any liability incurred by the Initial developer or such contributor as a result of warranty, support, indemnity or liability terms you offer. 4. Inability to comply due to statute or regulation. If it is impossible for you to comply with any of the terms of this license with respect to some or all of the covered code due to statute, judicial order, or regulation then you must: (a) comply with the terms of this license to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in section 3.4 and must be included with all distributions of the source code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this license. This license applies to code to which the initial developer has attached the notice in exhibit A and to related covered code. 6. Versions of the license. 6.1. New versions. Netscape communications corporation (“Netscape”) may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a particular version of the license, you may always continue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by netscape. No one other than netscape has the right to modify the terms applicable to covered code created under this license. 6.3. Derivative works. If You create or use a modified version of this license (which you may only do in order to apply it to code which is not already covered code governed by this license), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this license) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public license and netscape Public License. (Filling in the name of the initial developer, original code or contributor in the notice described in exhibit A shall not of themselves be deemed to be modifications of this license.) APPENDIX Distribution of executable versions. You may distribute covered code in executable form only if the requirements of section 3.1-3.5 have been met for that covered code, and if you include a notice stating that the source code version of the covered code is available under the terms of this license, including a description of how and where you have fulfilled the obligations of section 3.2. The notice must be conspicuously included in any notice in an executable version, related documentation or collateral in which you describe recipients' rights relating to the covered code. You may distribute the executable version of covered code or ownership rights under a license of your choice, which may contain terms different from this license, provided that you are in compliance with the terms of this license and that the license for the executable version does not attempt to limit or alter the recipient's rights in the source code version from the rights set forth in this license. If you distribute the executable version under a different license you must make it absolutely clear that any terms which differ from this license are offered by you alone, not by the Initial developer or any contributor. You hereby agree to indemnify the initial developer and every contributor for any liability incurred by the initial developer or such contributor as a result of any such terms You offer. Larger works. You may create a larger work by combining covered code with other code not governed by the terms of this license and distribute the larger work as a single product. In such a case, you must make sure the requirements of this license are fulfilled for the covered code. 157 APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. 8.2. APPENDIX 158 This license and the rights granted hereunder will terminate automatically if you fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the covered code which are properly granted shall survive any termination of this license. Provisions which, by their nature, must remain in effect beyond the termination of this license shall survive. If you initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against initial developer or a contributor (the initial developer or contributor against whom you file such action is referred to as “Participant”) alleging that: (a) such participant's contributor version directly or indirectly infringes any patent, then any and all rights granted by such participant to you under sections 2.1 and/or 2.2 of this license shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice you either: (i) agree in writing to pay participant a mutually agreeable reasonable royalty for your past and future use of modifications made by such participant, or (ii) withdraw your litigation claim with respect to the contributor version against such participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by participant to you under sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above. (b) any software, hardware, or device, other than such participant's contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, sold, distributed, or had made, modifications made by that participant. 8.3. If you assert a patent infringement claim against participant alleging that such participant's contributor version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such participant under sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by you or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The covered code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government end users acquire covered code with only those rights set forth herein. 11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the united states of america, any litigation relating to this License shall be subject to the jurisdiction of the federal courts of the northern district of california, with venue lying in santa clara county, california, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the united nations convention on contracts for the International sale of goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this license. EXHIBIT A -Mozilla Public License. 12. RESPONSIBILITY FOR CLAIMS. As between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and you agree to work with initial developer and contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] license are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] license and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] license. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] license." Software distributed under the license is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the license for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. The Initial Developer of the Original Code is___________________. Portions created by ______________________ are Copyright (C) _______________________. All Rights Reserved. Contributor(s): ______________________________________. NOTE: The text of this exhibit A may differ slightly from the text of the notices in the source code files of the original code. You should use the text of this exhibit A rather than the text found in the original code/source code for Your modifications. APPENDIX 13. MULTIPLE-LICENSED CODE. Initial developer may designate portions of the covered code as "Multiple-Licensed". "Multiple-Licensed" means that the initial developer permits you to utilize portions of the covered code under your choice of the NPL or the alternative licenses, if any, specified by the initial developer in the file described in exhibit A. The contents of this file are subject to the Mozilla Public License Version 1.1 (the “license”); you may not use this file except in compliance with the License. You may obtain a copy of the license at http://www.mozilla.org/MPL/ 159
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 100 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:fc357f10-277c-4b21-a745-b838532d38bd Modify Date : 2009:03:30 10:18:55+09:00 Create Date : 2009:03:30 10:18:50+09:00 Metadata Date : 2009:03:30 10:18:55+09:00 Document ID : uuid:17d0ac0b-3f6e-4fd2-b7e0-616f29d46924 Format : application/pdf Title : untitled Producer : Acrobat Distiller 6.0 (Windows)EXIF Metadata provided by EXIF.tools