LG Electronics USA 60PY3DFUA PDP TV/MONITOR User Manual coveren 2 f b
LG Electronics USA PDP TV/MONITOR coveren 2 f b
Contents
- 1. User Manual 1 of 2
- 2. User Manual 2 of 2
User Manual 1 of 2
LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 32LB9D 47LC7DF PLASMA TV MODELS 60PY3D Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. www.lgusa.com / www.lg.ca R is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TruSurround XT TruSurround XT LG TV with this logo displays Full HD(high-definition) 1080p native resolution by receiving and processing a Full HD 1080p signal. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB unit. With HDMI CEC support of LG’s audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. It has three HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product as practical. anu al SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may Ow ner to that safety instruction : be placed immediately adjacent Ow ner nual Ma nu al Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Ow ner Ow ner Ma nu Ma al nu al Ow ner Ow ner Ma anu al nu al Do not use this apparatus near water Clean only with dry cloth. Ow ner Ma Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. nu al Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Ow ner Ma nu al Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Only use attachments/accessories specified by the manufacturer. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. Ow ner anu al Ow ner Ma Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Unplug this apparatus during lightning storms or when unused for long periods of time. Outdoor Use Marking : WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an nu al Ow ner Ma nu al Ow ner Ma nu al Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DISCONNECTING DEVICE FROM MAINS Main plug is the disconnecting device. The plug must remain readily operable. CONTENTS MEDIAHOST WARNING / CAUTION ........................... SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES OF THIS TV . . . . . . . . . . . . . . . . 6 MEDIAHOST Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . . . . . . . . . . . . . . 10 Attaching the TV to a Wall . . . . . . . . . . . . . . . . . 12 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . 13 Back Cover for Wire Arrangement . . . . . . . . . . . 14 Desktop Pedestal Installation . . . . . . . . . . . . . . . 17 Vesa Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . 17 Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Antenna or Cable Connection . . . . . . . . . . . . . . 19 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 USB In Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Audio Out Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WATCHING TV / CHANNEL CONTROL Remote Control Functions . . . . . . . . . . . . . . . . . .36 Turning on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 39 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 40 On-Screen Menus Selection . . . . . . . . . . . . . . . . 41 Channel Setup - Auto Scan ( Auto Tuning) . . . . . . . . . . . . . . 42 - Add / Delete Channel ( Manual Tuning) . . 43 - Channel Editing . . . . . . . . . . . . . . . . . . . . . . .44 Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 SimpLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 PICTURE CONTROL Picture Size (Aspect Ratio) Control . . . . . . . . . .56 Preset Picture Settings - Picture Mode - Preset . . . . . . . . . . . . . . . . 57 - Color Tone - Preset . . . . . . . . . . . . . . . . . . .58 Manual Picture Adjustment - Picture Mode - User Mode . . . . . . . . . . . . 59 - Color Tone - User Mode. . . . . . . . . . . . . . .60 XD - Picture Improvement Technology . . . . . . . . . . . 61 Advanced - Cinema 3:2 Pulldown Mode . . . . . . 62 Advanced - Black( Darkness) Level . . . . . . . . . . 63 Advanced - TruM . . . . . . . . . . . . . . . . . . . . . . . . 64 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Image Sticking Minimization( ISM) Method . . . . . . . 66 Low-Power Picture Mode . . . . . . . . . . . . . . . . . . 67 SOUND & LANGUAGE CONTROL Auto Volume Leveler ( Auto Volume) . . . . . . . . . 68 Preset Sound Settings( Sound Mode) . . . . . . . . 69 Sound Setting Adjustment - User Mode . . . . . . . . 70 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Stereo / SAP Broadcast Setup . . . . . . . . . . . . . . 73 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . 74 Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . 75 On-Screen Menus Language Selection . . . . . . . 76 Caption Mode - Analog Broadcasting System Captions . . . . 77 - Digital Broadcasting System Captions . . .79 - Caption Option . . . . . . . . . . . . . . . . . . . . .80 TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . 81 - Manual Clock Setup . . . . . . . . . . . . . . . . . .82 Auto On/ Off Time Setting . . . . . . . . . . . . . . . . .83 Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . .84 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . 85 PARENTAL CONTROL / RATINGS Set Password & Lock System . . . . . . . . . . . . . . . 86 Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . 88 Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . 89 External Input Blocking . . . . . . . . . . . . . . . . . . . .92 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 APPENDIX Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .93 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Product Specifications . . . . . . . . . . . . . . . . . . . . 96 Programming the Remote Control . . . . . . . . . . 97 IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 External Control through RS-232C . . . . . . . . . 103 FEATURES OF THIS TV What is a Plasma TV ? Using plasma is the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. How does it work? Plasma TV is an array of cells, known as pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue. Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green, or blue). These phosphors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors. Plasma TV offers a rich, dynamic display because each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. This means that you get perfect images that are easily viewable in a display that is fewer than five inches thick. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle of over 160 degrees. This means that the display is clear and visible to viewers anywhere in the room. Wide Screen The wide screen offers a theater-like experience in your own home. Multimedia Connect your plasma display to a PC and use it for conferencing, games, and Internet browsing. The Picture-in-Picture feature allows you to view your PC and video images simultaneously. Versatile The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs do not fit. The Plasma TV Manufacturing Process: a few minute colored dots may be present on the Plasma TV screen The Plasma TV is composed of 0.9 to 2.2 million cells. A few cell defects will normally occur in the Plasma TV manufacturing process. Several tiny, minute colored dots visible on the screen should be acceptable. This also occurs in other Plasma TV manufacturers' products. The tiny dots appearing does not mean that this Plasma TV is defective. Thus a few cell defects are not sufficient cause for the Plasma TV to be exchanged or returned. Our production technology minimizes these cell defects during the manufacture and operation of this product. Cooling Fan Noise (This feature is not available for all models.) In the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the Plasma TV is equipped with cooling fans to cool the Monitor and improve its reliability. Therefore, a certain level of noise could occur while the fans are operating and cooling the Plasma TV. The fan noise doesn't have any negative effect on the Plasma TV's efficiency or reliability. The noise from these fans is normal during the operation of this product. We hope you understand that a certain level of noise from the cooling fans is acceptable and is not sufficient cause for the Plasma TV to be exchanged or returned. FOR LCD TV If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. PREPARATION ACCESSORIES TV INPUT STB Owner's Manual BRIGHT 1.5V 1.5V MENU TIMER RATIO BRIGHT SIMPL PREPARATION Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. INK LCD TV PLASMA TV Owner's Manual BACK http://www.lgusa.com www.lg.ca APM Copyright© 2007 LGE, All Rights Reserved. Owner’s Manual Batteries CC Remote Control CD Manual ■ AUTO DEMO M/C EJECT Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior. ■ Power Cord Do not wipe roughly when removing stain. Please be cautions of that excessive power may cause scratch or discoloration. Polishing Cloth Option Extras 75Ω Round Cable 2- TV Bracket Bolts 2- TV Brackets, 2- Wall Brackets D-sub 15 pin Cable For LCD TV models 32LB9D only Cable Management Twist Holder Arrange the wires with the twist holder. 4-bolts for stand assembly Refer to p. 13 PREPARATION FRONT PANEL CONTROLS PREPARATION ■ Here shown may be somewhat different from your TV. ■ If your TV stand has a protection film, remove it attached to the stand. Then wipe the stand with polishing cloth. 60PY3D Remote Control Sensor Program Display Power Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on. Touch Pad ENTER INPUT ENTER Button Button VOLUME MENU (F,G) POWER Button Button Buttons CHANNEL (E,D) Buttons CHANNEL (E,D) Buttons CH VOL VOLUME (F,G) Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button POWER Button /I Intelligent Eye Adjusts picture according to the surrounding conditions. PREPARATION 47LC7DF Power/Standby Indicator • illuminates red in standby mode. Remote Control Sensor • illuminates green when the set is switched on. 32LB9D CH CH CHANNEL (E,D) ButtonsCH VOL VOL VOLUME (F,G) Buttons VOL MENU MENU Button INPUT INPUT Button /I Remote Control Sensor ENTER Intelligent Eye Adjusts picture according to the surrounding conditions. ENTER Button POWER Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on. PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV. AV V IN 2 AV IN 2 USB IN USB IN PREPARATION 60PY3D USB Input port L/MONO AUDIOR R VIDEO L/MONO L/ MONO VIDEO AUDIO S-VIDEO S-VIDEO S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. USB IN 47LC7DF USB Input S-VIDEO VIDEO L/MONO AUDIO S-VIDEO Input Connect S-Video out from an SVIDEO device. AV IN 2 10 AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. Here shown may be somewhat different from your TV. USB IN ■ 32LB9D VIDEO L/MONO AUDIO R VIDEO L/MONO MONO R AUDIO L/ R AUDIO L/MONO AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. AV IN 2 PREPARATION VIDEO USB S-VIDEO Input port AV V INAV4 IN 4 ANTENNA/ CABLE IN RGB /DVI HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO)signal to the 1, 2 or 3 port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. RGB(PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. REMOTE CONTROL PORT Connect your wired remote control. AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. AUDIO OUT Connect analog audio to various types of equipment. DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. Power Cord Socket For operation with AC power. Caution : Never attempt to operate the TV on DC power. 11 PREPARATION ATTACHING THE TV TO A WALL PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ Here shown may be somewhat different from your TV. 47LC7DF 60PY3D 32LB9D ■ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. *Insert the eye-bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. ■ 12 Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. STAND INSTALLATION (Only 32LB9D model) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the product in the holes provided. PREPARATION 13 PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION 60PY3D Hold the CABLE MANAGEMENT with both hands and pull it as shown. 45° CABLE MANAGEMENT 14 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT as shown. ■ Here shown may be somewhat different from your TV. PREPARATION 47LC7DF Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT Bundle the cables using the supplied twist holder. TWIST HOLDER How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward. NOTE Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken. 15 PREPARATION ■ Here shown may be somewhat different from your TV. PREPARATION 32LB9D Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT Bundle the cables using the supplied twist holder. How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward. NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken. 16 TWIST HOLDER DESKTOP PEDESTAL INSTALLATION 60PY3D PREPARATION For proper ventilation, allow a clearance of 4 in. on each side and the top, 2.36 in. on the bottom, and 4 in. from the wall. 47LC7DF 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 32LB9D 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 60PY3D 32LB9D 47LC7DF 600mm 200mm 600mm USB IN AV IN 2 100mm VIDEO 400mm R AUDIO L/MONO 400mm VIDEO L/MONO AUDIO R S-VIDEO AV IN 4 NOTE Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. 17 PREPARATION SWIVEL STAND (Only 60PY3D model) After installing the TV, you can adjust the the TV set manually to the left or right direction by 20 degrees to suit your viewing position. PREPARATION NOTE G Before adjusting the angle, you must remove the cable management and loosen (to the left) the shaft bolt on the middle of stand’s back. And when stand be level with TV, you must close (to the right) the shaft bolt to set the hole. 18 ANTENNA OR CABLE CONNECTION 1. Antenna (analog or digital) USB IN AV IN 2 S-VIDEO R AUDIO L/MONO VIDEO L/MONO AUDIO R VIDEO PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. AV IN 4 Wall Antenna Socket Outdoor Antenna (VHF, UHF) Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA/ CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the bronze wire when connecting the antenna. 2. Cable ANTENNA/ CABLE IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) 3. Using both cable and antenna Antenna RF Coaxial Wire (75 ohm) Diplexer (Signal Combinner) ANTENNA/ CABLE IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) ANTENNA/ CABLE IN UHF Antenna VHF Signal Amplifier To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. ■ If the antenna is not installed properly, contact your dealer for assistance. ■ ■ NOTE The TV will let you know when the analog, cable, and digital channel scans are complete. 19 EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents. EXTERNAL EQUIPMENT SETUP When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the set. 2. How to use 20 ■ Turn on the digital set-top box. (DVI) (Refer to the owner’s manual for the digital set-top box. ■ Select COMPONENT 1 input source with using the INPUT button on the remote control. ■ If connected to COMPONENT IN 2 input, select COMPONENT 2 input source. Signal Component 1/2 480i Yes No 480p Yes Yes 720p Yes Yes 1080i Yes Yes 1080p Yes Yes HDMI/DVI1, 2 or 3 PB PR When connecting D-sub 15pin cable RGB 1. How to connect Connect the RGB output of the digital set-top box to the R G B (P C) jack on the set. Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set. 2. How to use Turn on the PC and the set. ■ Select R G B - P C input source with using the I N P U T button on the remote control. ■ RGB OUTPUT EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect Connect the digital set-top box to H D M I / D V I I N 1, 2 or 3 jack on the set. No separated audio connection is necessary. (DVI) VI) 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select HDMI1, HDMI2 or HDMI3 input source with using the INPUT button on the remote control. ■ If the digital set-top box player does not support Auto HDMI, you need to set the output resolution appropriately. HDMI-DTV OUTPUT 21 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable RGB EXTERNAL EQUIPMENT SETUP DVI-DTV OUTPUT 1. How to connect Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 or 3 jack on the set. Connect the audio output of the digital set-top box to the AUDIO(RGB/DVI) jack on the set. 2. How to use 22 ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select HDMI1, HDMI2 or HDMI3 input source with using the I N P U T button on the remote control. DVD SETUP 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. PB PR EXTERNAL EQUIPMENT SETUP When connecting Component cable 2. How to use ■ Turn on the DVD player, insert a DVD. ■ Select COMPONENT 1 input source with using the INPUT button on the remote control. ■ If connected to COMPONENT IN 2 input, select C O MPONENT 2 input source. ■ Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player PB PR PB PR Pb Pr B-Y R-Y Cb Cr 23 EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. Connect the audio outputs of the DVD to the AUDIO input jacks on the set. AUDIO S-VIDEO 2. How to use ■ Turn on the DVD player, insert a DVD. Select A V 1 input source with using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source. ■ ■ Refer to the DVD player's manual for operating instructions. When connecting HDMI cable 1. How to connect Connect the HDMI output of the DVD to the H D M I / D V I I N 1, 2 or 3 jack on the set. No separated audio connection is necessary. 2. How to use ■ Select HDMI1, HDMI2 or HDMI3 input source with using the INPUT button on the remote control. ■ Refer to the DVD player's manual for operating instructions. ■ If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. HDMI-DVD OUTPUT 24 VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. ■ ANTENNA/ CABLE IN ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO Wall Jack EXTERNAL EQUIPMENT SETUP When connecting with an antenna Antenna 1. How to connect Connect the RF antenna out socket of the VCR to the Antenna socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 25 EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable VIDEO S-VIDEO ANT IN OUTPUT SWITCH ANT OUT 1. How to connect ANTENNA/ CABLE IN VIDEO jacks between TV and Connect the AUDIO/V VCR. Match the jack colors(Video = yellow, Audio Left = white,and Audio Right = red) EXTERNAL EQUIPMENT SETUP 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A V 1 input source with using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source. ■ NOTE If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set. When connecting with an S-Video cable 1. How to connect Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. S-VIDEO VIDEO OUTPUT SWITCH ANT IN ANT OUT Connect the audio outputs of the VCR to the AUDIO input jacks on the set. 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select A V 1 input source with using the INPUT button on the remote control. ■ 26 If connected to AV IN 2, select A V 2 input source. CAUTION Do not connect to both Video and S-Video at the same time. OTHER A/V SOURCE SETUP 32LB9D L/MONO R AUDIO VIDEO VIDEO L/MONO AUDIO S-VIDEO AV IN 2 AV IN 4 Camcorder VIDEO Camcorder VIDEO Video Game Set Video Game Set EXTERNAL EQUIPMENT SETUP USB IN 60PY3D, 47LC7DF 1. How to connect VIDEO jacks between TV and Connect the AUDIO/V external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ■ Select A V 2 input source with using the INPUT button on the remote control. ■ If connected to AV IN 1 input, select A V 1 input source. ■ Operate the corresponding external equipment. 27 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. EXTERNAL EQUIPMENT SETUP When connecting D-sub 15 pin cable 1. How to connect Connect the RGB output of the PC to the R G B (P C) jack on the set. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set. RGB 2. How to use ■ Turn on the PC and the set. ■ Select RGB-PC input source with using the INPUT button on the remote control. NOTE 28 Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. RGB OUTPUT AUDIO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 30 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:ad4bce70-da99-467b-9fd0-0978350c0298 Modify Date : 2007:02:15 10:37:53+09:00 Create Date : 2007:02:15 10:37:31+09:00 Metadata Date : 2007:02:15 10:37:53+09:00 Document ID : uuid:43833be3-b226-494b-af3c-fdd08b4480ed Format : application/pdf Title : coveren(2)-f.b Creator : 3.3: LaserWriter 8 Z1-8.7.1 Author : PSY Producer : Acrobat Distiller 4.0 for MacintoshEXIF Metadata provided by EXIF.tools