LG Electronics USA 71PY1MWA Plasma Monitor User Manual 38289U0558C
LG Electronics USA Plasma Monitor 38289U0558C
Contents
- 1. User manual 1
- 2. User manual 2
- 3. User manual 3
User manual 1
PLASMA TV MODELS: 71PY1M OWNER’S MANUAL ENERGYSTAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : 38289U0558C Printed in Korea Warning/Caution Warning/Caution WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE • A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s warranty. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 2 Plasma Monitor Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction : 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-fiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING Owner’s Manual 3 Safety Instructions Safety Instructions continued 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION concerning the Power Cord : Most appliances recommend they be connected to a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. - This may cause a fire or an electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Use a dedicated power cord. Do not modify or extend the power cord. Do not install, remove, or reinstall the unit by yourself (customer). For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. For installation, always contact the dealer or an Authorized Service Center. Do not use if the power cord or plug is damaged, or socket is loose. Use a dedicated outlet for this appliance. Do not over bend the power cord and do not place anything on the power cord. Do not install the monitor near any sharp edge to avoid wire damage. 16. Outdoor Use Marking : WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture. 17. Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Safety instruction (MW-71PY10G only) 18. When the trim becomes dirty or stained, softly polish the surface. When polishing the surface, use gentle pressure. Heavy pressure can damage or discolor the surface. Clean the surface quickly and use gentle pressure. Heavy pressure can damage or discolor the surface. Keep the alcohol and the used cleaning towel out of the reach of children. Do not use anything to scrape or scratch at the surface of this unit, this will cause damage to the surface. Use soft gloves while installing or removing this unit to prevent damaging the surface. 4 Plasma Monitor Contents Contents Screen Menu Options Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .25 Setting Picture Format . . . . . . . . . . . . . . . . . . .25 Split Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Screen Position . . . . . . . . . . . . . . . . . . . . . . . .26 Manual Configure . . . . . . . . . . . . . . . . . . . . . . .26 Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Selecting Wide VGA mode . . . . . . . . . . . . . . . .27 Screen Adjustments . . . . . . . . . . . . . . . . . . . . .28 Cinema Mode Setup . . . . . . . . . . . . . . . . . . . . .28 Luminance Noise Reduction . . . . . . . . . . . . . . .28 PIP (Picture-in-Picture) Feature Watching PIP . . . . . . . . . . . . . . . . . . . . . . . . . .29 PIP Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 PIP Transparency . . . . . . . . . . . . . . . . . . . . . . .29 Moving PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Selecting an Input Signal Source for PIP . . . . . .29 DW Setup Options Watching DW . . . . . . . . . . . . . . . . . . . . . . . . . .30 Sub Picture Size Adjustment . . . . . . . . . . . . . . .30 Selecting a Source for the DW . . . . . . . . . . . . .30 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~4 Introduction Controls and Connection Options . . . . . . . . . .7~8 Remote Control Key Functions . . . . . . . . . . . . . .9 Installation Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Installation Instruction . . . . . . . . . . . . . . . . . . . . . .11 External Equipment Connections . . . . . . . . . .12~17 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Cable TV Setup . . . . . . . . . . . . . . . . . . . . . . . .13 External A/V Source Setup . . . . . . . . . . . . . . . .13 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 DTV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . .15~16 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Operation Turning on the Monitor . . . . . . . . . . . . . . . . . . . . .18 Menu Language Selection . . . . . . . . . . . . . . . . . .18 Picture Menu Options APC (Auto Picture Control) . . . . . . . . . . . . . . . .19 XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Auto Color Temperature Control . . . . . . . . . . . .19 Fleshtone . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 sRGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Manual Picture Control . . . . . . . . . . . . . . . . . .20 Sound Menu Options DASP (Digital Auto Sound Processing) . . . . . . .21 Manual Sound Control . . . . . . . . . . . . . . . . . . .21 BBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . .21 Timer Menu Options Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .22 On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .22 Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Special Menu Options Key Lock . . . . . . . . ISM Method . . . . . . Low power . . . . . . . XD Demo . . . . . . . . Index . . . . . . . . . . . External Control Device Setup . . . . . . . . . . . . . . . .31~36 IR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37~38 Programming the remote . . . . . . . . . . . . . . . . . . . .39~41 Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . .42 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44~45 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46~47 .23 .23 .23 .24 .24 After reading this manual, keep it handy for future reference. Owner’s Manual 5 Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers anywhere in the room. Wide Screen The screen of the Plasma Display is 71" so wide that your viewing experience is as if you are in a theater. Multimedia Connect your plasma display to a PC and you can use it for conferencing, games, and internet browsing. The Picture-in-Picture feature allows you to view your PC and video images simultaneously. Versatile The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs would not fit. The PDP Manufacturing Process: Why minute colored dots may be present on the PDP screen The PDP (Plasma Display Panel) which is the display device of this product is composed of 0.9 to 2.2 million cells. A few cell defects will normally occur in the PDP manufacturing process. Several minute colored dots visible on the screen should be acceptable. This also occurs in other PDP manufacturers' products and the tiny dots appearing does not mean that this PDP is defective. Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production technology is designed to minimize cell defects during the manufacture and operation of this product. Cooling Fan Noise In the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the PDP is equipped with cooling fans to cool the Monitor and improve its reliability. Therefore, a certain level of noise could occur while the fans are operating and cooling the PDP. The fan noise doesn't have any negative effect on the PDP's efficiency or reliability. The noise from these fans is normal during the operation of this product. We hope you understand that a certain level of noise from the cooling fans is acceptable and is not sufficient cause for the PDP to be exchanged or returned. WARNING TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 6 Plasma Monitor Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. 1.5V 1.5V Batteries Owner’s Manual MODE LIGHT POWER PIP INPUT Power Cord DW DASP APC MUTE SLEEP VOL CH WIN. POSITION SWAP WIN. SIZE ENTER EXIT MENU PIP INPUT PLAY REW PAUSE ARC STOP RECORD FF VIDEO COM1 HDMI1 HDMI2 SKIP COM2 KEY LOCK RGB INDEX D-sub 15 pin cable Remote Control DVI computer cable [Polishing Cloth] Polishing Cloth Polish the TV with the cloth. Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior. Do not wipe roughly when removing stain. Please be cautious of that excessive power may cause scratch or discoloration. Option Extras Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added. Contract your dealer for buying these items. Tilt wall mounting bracket Video cables Desktop stand Audio cables Owner’s Manual 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 7 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:eea287b2-570f-4d80-a44b-f7cf04a441f4 Modify Date : 2006:09:01 16:13:28+09:00 Create Date : 2006:09:01 16:13:03+09:00 Metadata Date : 2006:09:01 16:13:28+09:00 Document ID : uuid:c4bb7e0a-e42c-4cdd-a491-859dda2eb1cb Format : application/pdf Title : 38289U0558C Creator : QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1 Author : PSY Producer : Acrobat Distiller 4.0 for MacintoshEXIF Metadata provided by EXIF.tools