LG Electronics USA 71PY1MWA Plasma Monitor User Manual 38289U0558C

LG Electronics USA Plasma Monitor 38289U0558C

Contents

User manual 1

Please read this manual carefully before operating your set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.ENERGYSTAR is a set of power-savingguidelines issued by the U.S.Environmental Protection Agency(EPA).As an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets the ENER-GY STAR guidelines forenergy efficiency. P/NO : 38289U0558C Printed in KoreaOWNER’S MANUALPLASMA TVMODELS: 71PY1M
2 Plasma MonitorWarning/CautionWARNING/CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user tothe presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance (servicing) instructions in the literature accompanying the appli-ance.WARNING/CAUTION:TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.FCC NOTICE• A Class B digital deviceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.• Any changes or modifications not expressly approved by the party responsible for compli-ance could void the user’s warranty.CAUTION:Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized mod-ification could void the user’s warranty.WARNING/CAUTIONTO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.WWarning/Cautionarning/Caution
Owner’s Manual 3Safety InstructionsIMPORTANT SAFETY INSTRUCTIONSImportant safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet orsheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara-tus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. Theimportant safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be includ-ed where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by addingstatements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illus-trates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction : 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-fiers)that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one widerthan the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong areprovided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obso-lete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Safety InstructionsSafety InstructionsPORTABLE CART WARNING
4 Plasma MonitorSafety Instructions13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has exposed to rain or moisture, does not operate normally, or has been dropped.15. CAUTION concerning the Power Cord :Most appliances recommend they be connected to a dedicated circuit; that is, a single outlet circuit which pow-ers only that appliance and has no additional outlets or branch circuits. Check the specification page of thisowner's manual to be certain.- This may cause a fire or an electric shock.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed powercords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock orfire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it,discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walkedupon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.Use a dedicated power cord. Do not modify or extend the power cord.Do not install, remove, or reinstall the unit by yourself (customer). For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. For installation,always contact the dealer or an Authorized Service Center.Do not use if the power cord or plug is damaged, or socket is loose. Use a dedicated outlet for this appliance.Do not over bend the power cord and do not place anything on the power cord. Do not install the monitor near any sharpedge to avoid wire damage. 16. Outdoor Use Marking :WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.17. Wet Location Marking :Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placedon the apparatus.Safety instruction (MW-71PY10G only)18. When the trim becomes dirty or stained, softly polish the surface. When polishing the surface, use gentle pressure. Heavy pressure can damage or discolor the surface. Clean the surface quickly and use gentle pressure. Heavy pressure can damage or discolor the surface.Keep the alcohol and the used cleaning towel out of the reach of children.Do not use anything to scrape or scratch at the surface of this unit, this will cause damage to the surface.Use soft gloves while installing or removing this unit to prevent damaging the surface.Safety Instructions continuedSafety Instructions continued
Owner’s Manual 5ContentsSafety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~4IntroductionControls and Connection Options . . . . . . . . . .7~8Remote Control Key Functions . . . . . . . . . . . . . .9InstallationInstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Installation Instruction . . . . . . . . . . . . . . . . . . . . . .11External Equipment Connections . . . . . . . . . .12~17VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Cable TV Setup . . . . . . . . . . . . . . . . . . . . . . . .13External A/V Source Setup . . . . . . . . . . . . . . . .13DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .14DTV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .14PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . .15~16HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17OperationTurning on the Monitor . . . . . . . . . . . . . . . . . . . . .18Menu Language Selection . . . . . . . . . . . . . . . . . .18Picture Menu OptionsAPC (Auto Picture Control) . . . . . . . . . . . . . . . .19XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Auto Color Temperature Control . . . . . . . . . . . .19Fleshtone . . . . . . . . . . . . . . . . . . . . . . . . . . . .20sRGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Manual Picture Control . . . . . . . . . . . . . . . . . .20Sound Menu OptionsDASP (Digital Auto Sound Processing) . . . . . . .21Manual Sound Control . . . . . . . . . . . . . . . . . . .21BBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . .21Timer Menu OptionsClock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .22On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .22Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .22Special Menu OptionsKey Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23ISM Method . . . . . . . . . . . . . . . . . . . . . . . . . . .23Low power . . . . . . . . . . . . . . . . . . . . . . . . . . . .23XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Screen Menu OptionsAuto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .25Setting Picture Format . . . . . . . . . . . . . . . . . . .25Split Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Screen Position . . . . . . . . . . . . . . . . . . . . . . . .26Manual Configure . . . . . . . . . . . . . . . . . . . . . . .26Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Selecting Wide VGA mode . . . . . . . . . . . . . . . .27Screen Adjustments . . . . . . . . . . . . . . . . . . . . .28Cinema Mode Setup . . . . . . . . . . . . . . . . . . . . .28Luminance Noise Reduction . . . . . . . . . . . . . . .28PIP (Picture-in-Picture) FeatureWatching PIP . . . . . . . . . . . . . . . . . . . . . . . . . .29PIP Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29PIP Transparency . . . . . . . . . . . . . . . . . . . . . . .29Moving PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Selecting an Input Signal Source for PIP . . . . . .29DW Setup OptionsWatching DW . . . . . . . . . . . . . . . . . . . . . . . . . .30Sub Picture Size Adjustment . . . . . . . . . . . . . . .30Selecting a Source for the DW . . . . . . . . . . . . .30External Control Device Setup . . . . . . . . . . . . . . . .31~36IR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37~38Programming the remote . . . . . . . . . . . . . . . . . . . .39~41Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . .42Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44~45Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46~47ContentsContentsAfter reading this manual, keep it handy for future reference.
6 Plasma MonitorIntroductionIntroductionIntroductionWhat is a Plasma Display Panel (PDP)?If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At thatinstant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of visionYour flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display isclear and visible to viewers anywhere in the room. Wide ScreenThe screen of the Plasma Display is 71" so wide that your viewing experience is as if you are in a theater.MultimediaConnect your plasma display to a PC and you can use it for conferencing, games, and internet browsing. The Picture-in-Picturefeature allows you to view your PC and video images simultaneously.VersatileThe light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs wouldnot fit.The PDP Manufacturing Process: Why minute colored dots may be present on the PDP screenThe PDP (Plasma Display Panel) which is the display device of this product is composed of 0.9 to 2.2 million cells. A few celldefects will normally occur in the PDP manufacturing process. Several minute colored dots visible on the screen should be accept-able. This also occurs in other PDP manufacturers' products and the tiny dots appearing does not mean that this PDP is defective.Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production technology is designedto minimize cell defects during the manufacture and operation of this product. Cooling Fan NoiseIn the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the PDP is equipped withcooling fans to cool the Monitor and improve its reliability. Therefore, a certain level of noise could occur while the fans are operat-ing and cooling the PDP.The fan noise doesn't have any negative effect on the PDP's efficiency or reliability. The noise from these fans is normal during theoperation of this product. We hope you understand that a certain level of noise from the cooling fans is acceptable and is not suffi-cient cause for the PDP to be exchanged or returned.WARNINGTO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.
Owner’s Manual 7InstallationInstallationInstallationEnsure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealerwhere you purchased the product.Owner’s Manual1.5V1.5VBatteries Power CordLIGHTINPUTMODEPIPMUTE SLEEPVOL CHWIN. SIZEWIN. POSITIONSWAPMENUPIP INPUT ARCEXITPLAY PAUSE STOP RECORDVIDEO COM1 RGBHDMI1ENTERHDMI2KEY LOCK INDEXREW FF SKIPPOWERDWDASPAPCCOM2Remote ControlVideo cables Audio cables- Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added.- Contract your dealer for buying these items.Option ExtrasOption ExtrasTilt wall mounting bracket Desktop standD-sub 15 pin cable DVI computer cablePolishing ClothPolish the TV with the cloth.[Polishing Cloth]Slightly wipe stained spot on the exterior only with the cleansingcloths for the product exterior if there is stain or fingerprint onsurface of the exterior. Do not wipe roughly when removing stain. Please be cautious ofthat excessive power may cause scratch or discoloration.

Navigation menu