LG Electronics USA 71PY1MWA Plasma Monitor User Manual 38289U0558C

LG Electronics USA Plasma Monitor 38289U0558C

Contents

User manual 2

8 Plasma MonitorIntroductionControlsControlsINPUTMENUVOLTruSurround XTFront Panel ControlsFront Panel ControlsMENU ButtonINPUT ButtonVOLUME (FF,GG) ButtonsEE, DDButtonsINDEXSwitchesLED Displayon or off.RemoteControlSensorPower IndicatorIlluminates red in standbymode, Illuminates green whenthe monitor is turned on.Sub power Button
Owner’s Manual 9IntroductionConnection OptionsConnection OptionsDIGITAL AUDIO OUTOPTICALHDMI/DVI IN HDMI/DVI IN 12RS-232C INRS-232C IN(CONTROL & SERVICE)VIDEOVIDEOAUDIOCOMPONENTCOMPONENT IN INVIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INVIDEO IN 3VIDEO IN 3 VIDEO IN 4VIDEO IN 4AUDIO (RGB/DVI)AUDIO (RGB/DVI)RGB INRGB INRGB(PC/DTV)RGB(PC/DTV)REMOTE REMOTE CONTROL INCONTROL INBack Connection PanelBack Connection Panel1625734HDMI/DVI INConnect a HDMI signal to 1 or 2.Or DVI (VIDEO)signal to the 1 port with a DVI to HDMIcable.RS-232C IN (CONTROL & SERVICE) PORTConnect to the RS-232C port on a PC.VIDEO IN Connect audio/video output from an external device tothese jacks.S-VIDEO Connect S-Video out from an S-VIDEO device.COMPONENT INConnect a component video/audio device to these jacks.EURO SCART SOCKETConnect the euro scart of the VCR to these sockets.RGB IN AUDIO (RGB/DVI)Connect the monitor output from a PC to the appropriateinput port.RGB(PC/DTV)Connect the monitor output from a PC to the appropriateinput port.Remote Control PortConnect your wired remote control.1723456
10 Plasma MonitorIntroduction- When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Pressthe key again as necessary.Remote Control Key FunctionsRemote Control Key FunctionsLIGHTINPUTMODEPIPMUTE SLEEPVOL CHWIN. SIZEWIN. POSITIONSWAPMENUPIP INPUT ARCEXITPLAY PAUSE STOP RECORDVIDEO COM1 RGBHDMI1ENTERHDMI2KEY LOCK INDEXREW FF SKIPPOWERDWDASPAPCCOM2LIGHTIlluminates the remote control buttons.MODESelects the remote operating mode: MNT, VCR, DVD,CABLE, HDSTB or AUDIO. INPUTSelects: Video1-2-3-4, Component 1-2, RGB-DTV (or RGB-PC), DVI-DTV (or DVI-PC), HDMI input sources.POWERTurns your monitor or any other programmed equipment on oroff, depending on mode.PIPSelects the PIP mode.DWSelects the DW mode.WIN. SIZEAdjusts the sub picture size.NUMBER buttonsDosen’t work for monitor mode.WIN.POSITIONMoves the sub picture.SWAPExchanges the main/sub images.XD Switches the XD on or off.(Refer to p. 19)MENUBrings up the main menu to the screen.PIP INPUTSelects the input source for the sub picture.ARC Changes the picture format. (Refer to p. 25)EXITClears all on-screen displays and returns to monitor viewingfrom any menu.
Owner’s Manual 11Installing Batteries• Open the battery compartment cover on the back side and install the batteriesmatching correct polarity (+ with +, - with -).• Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones.Replace cover.THUMBSTICK (Up/Down/Left/Right/ENTER)Navigate the on-screen menus and adjust the system settingsto your preference. KEY LOCKSwitches the key lock on or off.INDEXSwitches LED Display on or off.DASPTo select the sound appropriate to your viewing programcharacter:SRS TSXT, Flat, Music, Cinema, Sports, or User(Refer to p.21)MUTESwitches the sound on or off.SLEEPSets the Sleep Timer.VOLUME UP/DOWNIncreases/decreases the sound level.CHANNEL UP/DOWNSelects available channels. Dosen’t work for monitor mode.LIGHTINPUTMODEPIPMUTE SLEEPVOL CHWIN. SIZEWIN. POSITIONSWAPMENUPIP INPUT ARCEXITPLAY PAUSE STOP RECORDVIDEO COM1 RGBHDMI1ENTERHDMI2KEY LOCK INDEXREW FF SKIPPOWERDWDASPAPCCOM2VIDEO/COM1/COM2/RGB/HDMI1/HDMI2Selects: Video1-2-3-4, Component 1-2, RGB-DTV (or RGB-PC),HDMI1, HDMI2 input sources.VCR/DVD/DVHS/Camcorder BUTTONSControl some video cassette recorders or DVD players("RECORD" button is not available for DVD player).
12 Plasma MonitorInstallation4 inches4 inches4 inches4 inches2 inchesWWall Mount Installationall Mount InstallationFor proper ventilation, allow a clearance of 4” on eachside and 2” from the wall. Detailed installation instruc-tions are available from your dealer, see the optionalWall Mounting Bracket Installation and Setup Guide.Installation InstructionsInstallation Instructions•Install this monitor only in a location where adequate ventilation is available.GROUNDINGEnsure that you connect the grounding / earth wire to prevent possibleelectric shock. If grounding methods are not possible, have a qualifiedelectrician install a separate circuit breaker. Do not try to ground theunit by connecting it to telephone wires, lightening rods, or gas pipes.PowerSupplyShort-circuitBreakerDesktop Pedestal InstallationDesktop Pedestal InstallationFor proper ventilation, allow a clearance of 4” on eachside and the top, 2.36” on the bottom, and 2” from thewall. Detailed installation instructions are included in theoptional Desktop Stand Installation and Setup Guideavailable from your dealer.
Owner’s Manual 13InstallationExternal Equipment ConnectionsExternal Equipment ConnectionsNOTE: Not all cables shown are included with the plasma display.- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.- Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen stillpicture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen.How to connect1. Connect the audio and video cables from the VCR's outputjacks to the monitor input jacks, as shown in the figure. When connecting the monitor to VCR, match the jack colors(Video = yellow, Audio Left = white, and Audio Right = red).2. If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared toconnecting a regular VCR to the Video input.3. If you connect the Euro scart socket of the VCR to the Euroscart socket of the set. No other connection is needed.Mono VCR: Connect the video output cable from the VCRto the VIDEO input on the monitor.S-VIDEO VCR: Connect the S-Video output cable from theVCR to the S-VIDEO input on the monitor. (Note that S-Video offers higher quality).How to use1. Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.) 2. Use the INPUT button on the remote control to selectVideo 1 or Video 3.VCR SetupVCR SetupVIDEOAUDIOCOMPONENT INVIDEOAUDIOMONO( )S-VIDEOVIDEO INVIDEO INVIDEO IN 3 VIDEO IN 4S-VIDEO OUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT OUTANT INVCRor
14 Plasma MonitorInstallationExternal Equipment ConnectionsExternal Equipment Connections- After subscribing to a cable monitor service from a local provider and installing a converter, you can watch cable TV program-ming. The monitor cannot display monitor programming unless a TV tuner device or cable TV converter box is connected to theMonitor.- For further information regarding cable monitor service, contact your local cable TV service provider(s).How to connect1. Connect the audio and video cables from the Cable Box's outputjacks to the monitor input jacks, as shown in the figure. When connecting the monitor to a Cable Box, match the jack colors(Video = yellow, Audio Left = white, and Audio Right = red).Or, connect the Euro scart socket of the Cable box to the Euro scartsocket of the set.How to use1. Use the INPUT button on the remote control to select Video 1.(If connected to VIDEO 2, VIDEO 3 or VIDEO 4, select the Video 2,Video 3 or Video 4 input source.)2. Select your desired channel with the remote control for cable box.Cable Cable TV SetupTV SetupVIDEOVIDEOAUDIOAUDIOCOMPONENTCOMPONENT IN INVIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INTVVCR RF Cable (R) AUDIO (L)VIDEOCable BoxHow to connect1. Connect the audio and video cables from the externalequipment's output jacks to the monitor input jacks, asshown in the figure. When connecting the monitor to external equipment, matchthe jack colors (Video = yellow, Audio Left = white, andAudio Right = red).Or, connect the Euro scart socket of the External A/V to theEuro scart socket of the set.How to use1. Use the INPUT button on the remote control to selectVideo1.(If connected to VIDEO 2, VIDEO 3 or VIDEO 4,select the Video 2, Video 3 or Video 4 input source.)2. Operate the corresponding external equipment. Refer toexternal equipment operating guide.External External A/V Source SetupA/V Source SetupVIDEOVIDEOAUDIOAUDIOCOMPONENTCOMPONENT IN INVIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INVIDEO INRLAUDIOVIDEOVideo Game SetCamcorder
Owner’s Manual 15Installation•Component Input portsTo get better picture quality, connect a DVDplayer to the component input ports as shown.How to connect1. Use the monitor’s COMPONENT (Y, PB, PR) INPUT, RGB, DVI or HDMI jack for video connections, dependingon your set-top box connector. Then, make the corresponding audio connections.How to use1. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 2. Use INPUT on the remote control to select Component 1, Component 2, RGB, DVI or HDMI.DTV SetupDTV SetupComponent ports of theMonitor YPBPRVideo output ports of DVD playerYYYYPbB-YCbPBPrR-YCrPRHow to connect1. Connect the DVD video outputs to the COMPONENT (Y, PB, PR) or HDMI INPUT jacks and connect the DVDaudio outputs to the AUDIO INPUT jacks on the monitor, as shown in the figure.2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the monitor and connect theDVD audio outputs to the AUDIO INPUT jacks on the monitor, as shown in the figure.How to use1. Turn on the DVD player, insert a DVD.2. Use the INPUT button on the remote control to select Component 1, Component 2, HDMI1 or 2. (If connect-ed to S-VIDEO, select the Video 1 external input source.)3. Refer to the DVD player's manual for operating instructions.DVD SetupDVD SetupAUDIO (RGB/DVI)AUDIO (RGB/DVI)RGB INRGB INRGB(PC/DTV)RGB(PC/DTV)REMOTE REMOTE CONTROL INCONTROL INRGB-DTV OUTPUT(R) AUDIO (L)HDMI OUTPUTVIDEOVIDEOAUDIOCOMPONENTCOMPONENT INVIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INBR(R) AUDIO (L)HDMI/DVI IN HDMI/DVI IN 12RS-232C INRS-232C IN(CONTROL & SERVICE)DVI-DTV OUTPUTDVDDigital Set-top BoxororHDMI/DVI IN 12RS-232C INRS-232C IN(CONTROL(CONTROL & SER & SERVICE)VICE)VIDEOVIDEOAUDIOCOMPONENT INVIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INVIDEO INHDMI OUTPUTVIDEOAUDIOCOMPONENT INVIDEOAUDIO( )S-VIDEOVIDEO IN(R) AUDIO (L)S-VIDEOHDMI/DVI IN 12RS-232C IN(CONTROL & SERVICE)VIDEOAUDIOCOMPONENT INVIDEOAUDIO( )S-VIDEOVIDEO INVIDEOVIDEOAUDIOAUDIOCOMPONENT INBR(R) AUDIO (L)VIDEOVIDEOAUDIOAUDIOMONO( )S-VIDEOS-VIDEOVIDEO INVIDEO IN- To watch digitally broadcast programs, purchase and connect a digital set-top box.- This monitor supports HDCP (High-bandwidth Digital Contents Protection) protocol forDVI DTV (480p,720p,1080i) mode.

Navigation menu