LG Electronics USA 9QK-DMMB0502LX Bluetooth Adapter Card User Manual

LG Electronics USA Bluetooth Adapter Card

user manual

MCSLOGIC Product Approval Datasheet V0.1 1/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential PRODUCT APPROVAL DATASHEET PRODUCT MCSLogic Class 2 Bluetooth Module MODEL NAME MB0502LX LG P/N CUSTOMER LG Electronics Checked By Approved By Company Seal MCSLOGIC
MCSLOGIC Product Approval Datasheet V0.1 2/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential Revision History Version Date Revision Description 0.1 12/10/26 Initial release
MCSLOGIC Product Approval Datasheet V0.1 3/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential Table of Contents 1. INTRODUCTION ........................................................................................................................................................... 4 2. GENERAL FEATURES ................................................................................................................................................. 4 2.1 MODULE FEATURES .................................................................................................................................................. 4 2.2 FIRMWARE FEATURES ............................................................................................................................................. 5 3. MECHANICAL DIMENSION ...................................................................................................................................... 6 4. ELECTRICAL CHARACTERISTICS ......................................................................................................................... 7 5. PIN CONFIGURATION .............................................................................................................................................. 10 6. MB0502LX CONTROL METHOD............................................................................................................................. 11 7. APPROVAL STATEMENTS ...................................................................................................................................... 12
MCSLOGIC Product Approval Datasheet V0.1 4/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 1. Introduction MB0502LX is a fully integrated Bluetooth module. It is based on CSR’s Bluecore5-Multimedia External with specific interface design to meet LG Electronics’s needs. MB0502LX is compatible with Bluetooth specification version 3.0. It integrates RF, Baseband controller, etc., a completed Bluetooth subsystem. MB0502LX supports A2DP Sink, AVRCP Controller&Target, HFP, SPP profiles. It provides a UART interface, analog/I2S/SPDIF audio output and functional GPIO. MB0502LX can control by UART. Please refer to MB0502LX software user guide for the interfacing protocol. 2. General Features 2.1 Module Features - Operation Range (Class II) : 10 meters - Operating Temperature Range : -10℃ ~ 80℃ - Operating VDD Range : Typical 3.3V(3.0V ~ 3.6V) - Output Power : 5dBm PK - Interfaces : UART, Analog Audio Line-in, SPDIF Audio Out, Functional I/O - Internal Antenna - Compatible with Bluetooth Specification 3.0 - 64MIPS Kalimba DSP Co-Processor - 16-bit Internal Stereo CODEC - RoHS Compliant - GFSK/8DPSK sf modulation, 79 channel
MCSLOGIC Product Approval Datasheet V0.1 5/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 2.2 Firmware Features - Bluetooth Stack : UnifiedStack 3.0 - Host Interface : UART - Support Profile : A2DP (Sink), AVRCP Controller/Target, HFP, SPP - Profile version : A2DP V1.2, AVRCP1.4, HFP1.6, SPP1.1 - DUT(Device Under Test) Mode Support - DFU(Device Firmware Upgrade) Support
MCSLOGIC Product Approval Datasheet V0.1 6/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 3. Mechanical Dimension TOP View (Unit : mm) Mark Dimension Mark Dimension Mark Dimension Mark Dimension Mark Dimension A 25.00±0.5 D 12.00±0.3 G 3.00±0.3 J 4.30±0.3 M 3.40±0.3 B 35.00±1.0 E 0.50±0.15 H 10.00±0.5 K 4.00±0.3 N 1.00±0.3. C 16.50±0.3 F 2.00±0.3 I 7.00±0.5 L 2.50±0.3
MCSLOGIC Product Approval Datasheet V0.1 7/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 4. Electrical Characteristics Current consumption Parameter Condition Avg Peak Unit Page Scan 3.9 - mA Inquiry and Page Scan 5 10 mA SCO Connection HV1 Master 40 - mA SCO Connection HV3 Master 28 - mA ACL No data transfer Master 5 - mA ACL data transfer Master 30 - mA Input/Output Characteristics Parameter Min Max Unit Digital (UART, PIO) VIL Input Voltage Low -0.4V 0.8V V VIH Input Voltage High 2.3V 3.6V V VOL Output Voltage Low - 0.2V V VOH Output Voltage High 3.1V - V General Performance Parameter Condition Min Type Max Unit Frequency Range 2402 2480 MHz Impedance at Antenna 50 Ohm
MCSLOGIC Product Approval Datasheet V0.1 8/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential Transmitter Performance Parameter Condition Min Type Max Unit Transmit Power Peak 3 5 7 dBm Power density - - 20 dBm 20dB bandwidth 1000 KHz Adjacent channel power ±2% - - -20 dBm ±3% - - -40 dBm ±4% - - -40 dBm Out-band Spurious Emission 30MHz ~ 1GHz - - -36 dBm 1GHz ~ 12.75GHz - - -30 dBm 1.8GHz ~ 1.9GHz - - -47 dBm 5.1GHz ~ 5.3GHz - - -47 dBm Modulation Characteristic ∆F1avg 140 - 175 KHz ∆F2max 115 - - KHz ∆F2avg / ∆F1avg 80 - - % Initial Carrier Frequency Tolerance DH1 packet -40 - 40 KHz Carrier Frequency Drift DH5 packet -25 25 KHz
MCSLOGIC Product Approval Datasheet V0.1 9/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential Receiver Performance Parameter Condition Min Type Max Unit Sensitivity level (BER≤0.1%) Single slot (DH1 packet) -70 - - dBm Sensitivity level (BER≤0.1%) Multi slot (DH5 packet) -70 - - dBm C/I performance (BER≤0.1%) C/Ico-channel, Input = -60dBm 0 - 11 dB C/I1MHz, Input = -60dBm - - 0 dB C/I2MHz, Input = -60dBm - - -20 dB C/I≥3Mhz, Input = -67dBm - - -40 dB Image radio, Input = -67dBm - - -9 dB Image±1, Input = -67dBm - - -20 dB Out-of-band Blocking (BER≤0.1%) 30MHz ~ 2000MHz -10 - - c 2000MHz ~ 2400MHz -27 - - dBm 2500MHz ~ 3000MHz -27 - - dBm 3000MHz ~ 12.75GHz -10 - - dBm Intermodulation (BER≤0.1%) Input=-64dBm, n=5 -39 - - dBm Maximum Input Level (BER≤0.1%) Single slot (DH1 packet) -20 -5 - dBm
MCSLOGIC Product Approval Datasheet V0.1 10/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 5. Pin Configuration Symbol Description I CMOS input O Output P1 supply voltage VDD_P1 Pin descriptions for the MB0502LX Module NO Pin Name Volt I/O Description 1 GND P1 I DIGITAL Ground 2 NRESET P1 I System Reset(Low Active) 3 UART_RX P1 I UART Data Input active high 4 UART_TX P1 O UART Data Output active high 5 GND P1 I DIGITAL Ground 6 MUTE P1 O General Purpose I/O 7 I2S_SCK P1 O Bit clock 8 I2S_SD_OUT P1 O Data output 9 I2S_SD_IN P1 I/O Data input 10 I2S_WS P1 O LR clock 11 GND P1 I DIGITAL Ground 12 AOUT_P_L P1 O Analog audio positive left 13 AOUT_N_L P1 O Analog audio negative left 14 AOUT_P_R P1 O Analog audio positive right 15 AOUT_N_R P1 O Analog audio negative right 16 GND P1 I DIGITAL Ground 17 N/C P1 Not Connected. 18 N/C P1 Not Connected. 19 GND P1 I DIGITAL Ground 20 VDD P1 I VCC 3.3V NO Pin Name Volt I/O Description 1 N/C P1 Not Connected. 2 MIC BIAS P1 O Microphone bias 3 MIC INPUT P1 I Analog audio input 4 AGND P1 I Analog Ground
MCSLOGIC Product Approval Datasheet V0.1 11/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 6. MB0502LX Control Method 1) There is UART Protocol document between Host MCU and BT Module. So you can use command/response via UART. 2) RF Test Utility First time, CSR Bluesuite program must be installed. you can use BTCli.exe and enter DUT(Device Under Test) mode. So RF equipment can inquiry and test. (reference document.) *reference document : MB0502LX_DUT_Manual.pdf 3) RF Test method RF Test tool is BlueTest.exe at CSR bluesuite program. You can see detail explanation from reference document. * reference document : BlueTest Instruction Manual.pdf
MCSLOGIC Product Approval Datasheet V0.1 12/12 Copyright  2012 MCS LOGIC Limited. All rights reserved Confidential 7. Approval Statements This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) This module may not be co-located with any other transmitters or antennas. 2) The antenna used with this module must be installed to provide a separation distance of at least 20cm from all persons. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed. In the event that these conditions cannot be met, then the FCC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product including this module and obtaining separate FCC authorizations. Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: BEJ9QK-DMMB0502LX

Navigation menu