LG Electronics USA 9QK-DMPWMN5275 WLAN Adapter Card User Manual english manual 1011029

LG Electronics USA WLAN Adapter Card english manual 1011029

User Manual(1101)

                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea        PW-MN5275 WLAN Adapter Card         User Guide   Version 1.1  OCT., 2012
                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea        Revision History Release  Date  Revision  Initials1.1 2012-10-31  First release.
                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea       STATEMENT and Warning  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.   This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5150-5250MHz is limited “indoor use only”.  FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. French: Cet appareil radio est conforme au CNR-210 d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea       Japan  NCC 「依據低功率電波輻射性電機管理辦法   第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均 不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干 擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機 設備之干擾。」  任一平台若裝置本模組,其平台標籤須標示 “內建 WiFi 模組 NCC:XXXXXXXXXXX”  This device is intended only for OEM integrators under the following conditions:    The antenna must be installed such that 20 cm is maintained between the antenna and users, and     The transmitter module may not be co-located with any other transmitter or antenna.    As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed  IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea       End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: BEJ9QK-DMPWMN5275”, “contains IC: 2703H-DMPWMN5275”. The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met.   Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.  CE  Hereby declares that this WiFi module is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC. The standards for complying are as following: ETSI EN 301 489-1 V1.9.2: 2011-09 ETSI EN 301 489-17 V2.1.1: 2009-05 ETSI EN 300 328 V1.7.1:2006-10 ETSI EN 301 893 V1.6.1: 2011-11 EN 62311: 2008 EN 60950-1: 2006 +A11:2009  This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.   National Restrictions   This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
                                 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea       Country Restriction Reason/remark Bulgaria None  General authorization required for outdoor use and public service Italy None  If used outside of own premises, general authorization is required Luxembourg None  General authorization required for network and service supply(not for spectrum) Norway Implemented  This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Federation  None  Only for indoor applications  To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is tropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
  CONTENTS Package Contents .................................................................................................... 8Chapter 1Introduction ........................................................................................... 91.1Overview of the Product ............................................................................................ 91.2Features ..................................................................................................................... 9Chapter 2Linux Installation Guide (For Consumer Electronics) ..................... 102.1Hardware Installation ............................................................................................... 102.2Software Installation ................................................................................................ 10Appendix A: Specifications ...................................................................................  11
PW-MN5275  WLAN Adapter Card   8Package Contents The following items should be found in your package:  PW-MN5275 WLAN Adapter Card Conventions: The ‘Module’ mentioned in this user guide stands for PW-MN5275 WLAN Adapter Card without any explanation.
PW-MN5275  WLAN Adapter Card   9Chapter 1 Introduction Thank you for choosing the PW-MN5275 WLAN Adapter Card! 1.1  Overview of the Product The module is an IEEE802.11 a/b/g/n client device. It is mainly designed to provide a high-speed and unrivaled wireless performance for wireless embedded system application. With a faster wireless connection, you can get a better Internet experience without the cost of running network cables. With the 802.11n technology, the PW-MN5275 auto-sensing capability allows high packet transfer rate of up to 300Mbps for maximum throughput. It has good capability on anti-jamming, and it can also interoperate with other wireless (802.11 a/b/g/n) products. The module supports WEP, WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed. With unmatched wireless performance, reception, and security protection, it is easily to be used in different kinds of wireless embedded system for its size.    Note: The PW-MN5275 is designed to be used inside consumer electronic products, such as TV, Blue-Ray, Home Theater, etc. It’s a 2T2R product. So both of the antennas installed on the PCB will be in use at the same time.  1.2  Features   Complies with IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n standards   Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, 64/128-bit WEP encryption   Supports high rate of up to 300Mbps for maximum throughput, supports automatically adjust to lower speeds due to distance or other operating limitations   Provides USB 2.0 interface   Good capability on anti-jamming   Supports roaming between access points when configured in Infrastructure mode   Ease to configure and provides monitoring information
PW-MN5275  WLAN Adapter Card   10Chapter 2 Linux Installation Guide (For Consumer Electronics) 2.1  Hardware Installation For the Consumer Electronics products which use PW-MN5275, it must provide a corresponding connector for the module. After connecting the module to the device, the hardware installation is finished.   2.2  Software Installation For the Consumer Electronics products, the Linux Driver of PW-MN5275 is embedded in default. So the module is a plug and play device. After connecting the module to the device, PW-MN5275 will work well.    2.3 Pin Definitions
PW-MN5275  WLAN Adapter Card   11Appendix A: Specifications Normal Interface  USB 2.0 Interface Standards  IEEE802.11a; IEEE802.11b; IEEE802.11g; IEEE802.11n Operating System  Windows XP, Vista, 7, Linux Throughput 300Mbps (Max)  Radio Data Rate 11a: up to 54Mbps(Dynamic) 11b: up to11Mbps (Dynamic) 11g: up to 54Mbps (Dynamic) 11n: up to 300Mbps (Dynamic) Modulation 11a:OFDM  11b:CCK,QPSK,BPSK  11g:OFDM  11n: QPSK,BPSK,16-QAM,64-QAM Media Access Protocol  CSMA/CA with ACK Data Security  WPA/WPA2; 64/128-bit WEP; TKIP/AES Frequency 2.400 ~ 2.4835GHz 5.15 ~ 5.25GHz (Taiwan is not applicable) 5.725 ~ 5.850GHz Spread Spectrum  Direct Sequence Spread Spectrum (DSSS) Safety & Emissions  FCC/ IC/ NCC, CE, Japan * 1. Only 2.412GHz~2.462GHz is allowed to be used in USA, which means only channel 1~11 is available for American users to choose. 2. Rules on the use of 5GHz band channels may vary according to different national laws.      Environmental and Physical Operating Temp.  0℃~60℃ Storage Temp.  -20℃~ 70℃ Humidity  10% ~ 90% RH, Non-condensing Product Dimensions  45.0* 20.0* 10.7 mm
PW-MN5275  WLAN Adapter Card   12

Navigation menu