LG Electronics USA 9QK-DWAM82DB Wireless Adapter Card User Manual 20101026 LG FCC TestSW Manual

LG Electronics USA Wireless Adapter Card 20101026 LG FCC TestSW Manual

User manual

LG_DWAM82-D module FCC Test manual.doc Page 1 of 12 © 2010 WSS CONFIDENTIAL LG DWAM82-DB Module for Hx995 FCC Test S/W manual Module: DWAM82-DB Date: Jun 03, 2010 Any STS Information is provided “as is” without any express or implied warranty of any kind, including warranties of merchantability, non-infringement of intellectual property, or fitness for any particular purpose. In no event shall Wireless Sound Solutions and/or its affiliate companies, or its suppliers liable for any damages whatsoever arising out of the use of or inability to use the information or the materials. Wireless Sound Solutions, its affiliate companies, and its suppliers further do not warrant the accuracy or completeness of information, text, graphics, or other items contained within materials. Wireless Sound Solutions, Inc. may make changes to materials, or the products described within, at any time, without notice. ©2009 Wireless Sound Solutions. All rights reserved. Wireless Sound Solutions, STS and STS-wireless are trademarks of Wireless Sound Solutions. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 2 of 12 © 2010 WSS CONFIDENTIAL Hardware used: 4CH EVK. DWAM82-DB module Test software used: • For EvK : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex • For DWM82-DB module : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex Objective Showing how to change each mode needed for FCC Test. Date Revision Location Change Author Jun 03, 2010 0.1 SG First Draft Won CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 3 of 12 © 2010 WSS CONFIDENTIAL Classification by index number. < 2400MHz ~ 2483.5MHz> RF Band Mod/UnMod Tx/Rx Ant A/B Index Remarks 2.4G Modulated Continuous Tx Ant A 0x01 Ch 1, Freq : 2412MHz 0x02 Ch 2, Freq : 2438MHz 0x03 Ch 3, Freq : 2464MHz Ant B 0x04 Ch 1, Freq : 2412MHz 0x05 Ch 2, Freq : 2438MHz 0x06 Ch 3, Freq : 2464MHz Continuous Rx Ant A 0x07 Ch 1, Freq : 2412MHz 0x08 Ch 2, Freq : 2438MHz 0x09 Ch 3, Freq : 2464MHz Ant B 0x0a Ch 1, Freq : 2412MHz 0x0b Ch 2, Freq : 2438MHz 0x0c Ch 3, Freq : 2464MHz Unmodulated Continuous Tx Ant A 0x0d Ch 1, Freq : 2412MHz 0x0e Ch 2, Freq : 2438MHz 0x0f Ch 3, Freq : 2464MHz Ant B 0x10 Ch 1, Freq : 2412MHz 0x11 Ch 2, Freq : 2438MHz 0x12 Ch 3, Freq : 2464MHz Continuous Rx Ant A 0x13 Ch 1, Freq : 2412MHz 0x14 Ch 2, Freq : 2438MHz 0x15 Ch 3, Freq : 2464MHz Ant B 0x16 Ch 1, Freq : 2412MHz 0x17 Ch 2, Freq : 2438MHz 0x18 Ch 3, Freq : 2464MHz • The index number can be changed by pressing “Spare 3” button on the EVK. • For more detailed, you can find at the page 9. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 4 of 12 © 2010 WSS CONFIDENTIAL < 5725MHz ~ 5825MHz> RF Band Mod/UnMod Tx/Rx Ant A/B Index Remarks 5.8G Modulated Continuous Tx Ant A 0x21 Ch 1, Freq : 5736MHz 0x22 Ch 2, Freq : 5762MHz 0x23 Ch 3, Freq : 5814MHz Ant B 0x24 Ch 1, Freq : 5736MHz 0x25 Ch 2, Freq : 5762MHz 0x26 Ch 3, Freq : 5814MHz Continuous Rx Ant A 0x27 Ch 1, Freq : 5736MHz 0x28 Ch 2, Freq : 5762MHz 0x29 Ch 3, Freq : 5814MHz Ant B 0x2a Ch 1, Freq : 5736MHz 0x2b Ch 2, Freq : 5762MHz 0x2c Ch 3, Freq : 5814MHz Unmodulated Continuous Tx Ant A 0x2d Ch 1, Freq : 5736MHz 0x2e Ch 2, Freq : 5762MHz 0x2f Ch 3, Freq : 5814MHz Ant B 0x30 Ch 1, Freq : 5736MHz 0x31 Ch 2, Freq : 5762MHz 0x32 Ch 3, Freq : 5814MHz Continuous Rx Ant A 0x33 Ch 1, Freq : 5736MHz 0x34 Ch 2, Freq : 5762MHz 0x35 Ch 3, Freq : 5814MHz Ant B 0x36 Ch 1, Freq : 5736MHz 0x37 Ch 2, Freq : 5762MHz 0x38 Ch 3, Freq : 5814MHz • The index number can be changed by pressing “Spare 3” button on the EVK. • For more detailed, you can find at the page 9. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 5 of 12 © 2010 WSS CONFIDENTIAL Button descriptions on EVK. • Reset : To reset the whole system and start newly. • SPARE_1 : To switch RF band between 2.4G and 5.8G. There is more detailed information at the page 10. • SPARE_3 : To select a index number which has own functionality as written above. There is more detailed information at the page 9. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 6 of 12 © 2010 WSS CONFIDENTIAL GUI tool descriptions. - How to update Serial-Com SW for ATMEL MCU. • Double click the GUI tools named “DARR82_GUI_demo_5Ghz_2_6_1.exe” • Once the photos as shown left appear, please click “I Agree” button. • Go to “USB Port Settings” box at the bottom of GUI tool • Select the triangle button. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 7 of 12 © 2010 WSS CONFIDENTIAL • At this time, select “USB1(A3SEB7YE) and press the “Apply” button to confirm the settings. • Do not pay any attention to USB serial number. It may different from each computer. • You could see that the port of USB1 Is open. • Go to Tools on the top of GUI • Select “EVK Upgrade” under Tools’s submenu. • Please press the button as shown left . CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 8 of 12 © 2010 WSS CONFIDENTIAL • As shown left, if the button of “Change Loadfile” is activated, please select the serial_com_V_CU_005_5_8G_FCC.hex located at “\SW\For_EVK\” • And then press the “Start Loading” button to update the EVK. • Once this update process is successfully done, success message of “Check CRC16” will be shown up and disappear a moment later. • Go to Tools menu on the top of GUI and select it. • Among a few submenus under Tools please select “RS232 Info”. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 9 of 12 © 2010 WSS CONFIDENTIAL < Index switching at either 2.4GHz or 5.8G> • The pop up window will come out after you select “RS232 Info”. • If you look into the red circle, you can see the current index number. Index 0 means the idle status. • At this time, please press “Spare 3” button to change current index. • Every time you press “Spare 3 button, the Current Index number will change. • The detailed information about Index number is at the page 3 and 4. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 10 of 12 © 2010 WSS CONFIDENTIAL < Band switching between 2.4G and 5.8G> • The captured photo shows how to change RF Band from 5.xGHz to 2.xGHz. • Press “Spare 1” button on the EVK => Current Index will set to “0” • The index from 0x01 to 0x18 will be available to select by pressing “Spare 3” button. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 11 of 12 © 2010 WSS CONFIDENTIAL - How to update EEPROM on DWAM82-DB. • Go to “Tools” at the top menu and select “Program 8052 Firmware”. • 1) Press “Erase Button” • 2) Check the message of “Completed successfully”. • 3) Make sure the values are same as snap-shot. • 4) Search and select the hex file ou need to update with. • Press “Download button” to start to update EEPROM. CONFIDENTIAL FORLG & NamugaONLY
LG_DWAM82-D module FCC Test manual.doc Page 12 of 12 © 2010 WSS CONFIDENTIAL • The bar should be in progress. • After successful update, message will show like left snap-shot. • CRC value may be different from each software. • Press “Reset ” button on EVK. CONFIDENTIAL FORLG & NamugaONLY
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter Module FCC ID: BEJ9QK-DWAM82DB The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. End users cannot modify this transmitter device. Any Unauthorized modification could void the user‘s authority to operate this device.

Navigation menu