LG Electronics USA 9QK-DWAM82DB Wireless Adapter Card User Manual 20101026 LG FCC TestSW Manual
LG Electronics USA Wireless Adapter Card 20101026 LG FCC TestSW Manual
User manual
NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc LG DWAM82-DB Module for Hx995 FCC Test S/W manual Module: DWAM82-DB Date: Jun 03, 2010 CO Any STS Information is provided “as is” without any express or implied warranty of any kind, including warranties of merchantability, non-infringement of intellectual property, or fitness for any particular purpose. In no event shall Wireless Sound Solutions and/or its affiliate companies, or its suppliers liable for any damages whatsoever arising out of the use of or inability to use the information or the materials. Wireless Sound Solutions, its affiliate companies, and its suppliers further do not warrant the accuracy or completeness of information, text, graphics, or other items contained within materials. Wireless Sound Solutions, Inc. may make changes to materials, or the products described within, at any time, without notice. ©2009 Wireless Sound Solutions. All rights reserved. Wireless Sound Solutions, STS and STS-wireless are trademarks of Wireless Sound Solutions. Page 1 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc Date Jun 03, 2010 Revision 0.1 Location SG Change First Draft Author Won Hardware used: 4CH EVK. DWAM82-DB module Test software used: For EvK : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex For DWM82-DB module : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex CO • • Objective Showing how to change each mode needed for FCC Test. Page 2 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc Classification by index number. < 2400MHz ~ 2483.5MHz> RF Band 2.4G Mod/UnMod Modulated Tx/Rx Ant A/B Continuous Tx Ant A Ant B Continuous Rx Ant A Ant B Unmodulated Continuous Tx Ant A Ant B Continuous Rx Ant A Ant B Remarks Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz Ch 1, Freq : 2412MHz Ch 2, Freq : 2438MHz Ch 3, Freq : 2464MHz The index number can be changed by pressing “Spare 3” button on the EVK. For more detailed, you can find at the page 9. CO • • Index 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 Page 3 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc < 5725MHz ~ 5825MHz> RF Band 5.8G Mod/UnMod Modulated Tx/Rx Continuous Tx Ant A/B Ant A Ant B Continuous Rx Ant A Ant B Unmodulated Continuous Tx Ant A Ant B Continuous Rx Ant A Ant B 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2a 0x2b 0x2c 0x2d 0x2e 0x2f 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 Remarks Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz Ch 1, Freq : 5736MHz Ch 2, Freq : 5762MHz Ch 3, Freq : 5814MHz The index number can be changed by pressing “Spare 3” button on the EVK. For more detailed, you can find at the page 9. CO • • Index Page 4 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc CO Button descriptions on EVK. • • Reset : To reset the whole system and start newly. SPARE_1 : To switch RF band between 2.4G and 5.8G. There is more detailed information at the page 10. • SPARE_3 : To select a index number which has own functionality as written above. There is more detailed information at the page 9. Page 5 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc GUI tool descriptions. - How to update Serial-Com SW for ATMEL MCU. • • • Go to “USB Port Settings” box at the bottom of GUI tool Select the triangle button. CO • Double click the GUI tools named “DARR82_GUI_demo_5Ghz_2_6_1. exe” Once the photos as shown left appear, please click “I Agree” button. Page 6 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc • • At this time, select “USB1(A3SEB7YE) and press the “Apply” button to confirm the settings. Do not pay any attention to USB serial number. It may different from each computer. • You could see that the port of USB1 Is open. • • Go to Tools on the top of GUI Select “EVK Upgrade” under Tools’s submenu. Please press the button as shown left . CO • Page 7 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R CO LG_DWAM82-D module FCC Test manual.doc • As shown left, if the button of “Change Loadfile” is activated, please select the serial_com_V_CU_005_5_8G_FCC. hex located at “\SW\For_EVK\” • And then press the “Start Loading” button to update the EVK. • Once this update process is successfully done, success message of “Check CRC16” will be shown up and disappear a moment later. • Go to Tools menu on the top of GUI and select it. Among a few submenus under Tools please select “RS232 Info”. • Page 8 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc CO < Index switching at either 2.4GHz or 5.8G> • The pop up window will come out after you select “RS232 Info”. • If you look into the red circle, you can see the current index number. Index 0 means the idle status. • At this time, please press “Spare 3” button to change current index. • Every time you press “Spare 3 button, the Current Index number will change. • The detailed information about Index number is at the page 3 and 4. Page 9 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc < Band switching between 2.4G and 5.8G> The captured photo shows how to change RF Band from 5.xGHz to 2.xGHz. • Press “Spare 1” button on the EVK => Current Index will set to “0” • The index from 0x01 to 0x18 will be available to select by pressing “Spare 3” button. CO • Page 10 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc - How to update EEPROM on DWAM82-DB. • Go to “Tools” at the top menu and select “Program 8052 Firmware”. • • 1) Press “Erase Button” 2) Check the message of “Completed successfully”. 3) Make sure the values are same as snap-shot. 4) Search and select the hex file ou need to update with. • • Press “Download button” to start to update EEPROM. CO • Page 11 of 12 © 2010 WSS CONFIDENTIAL NF LG ID & NT ON am IAL LY ug FO a R LG_DWAM82-D module FCC Test manual.doc The bar should be in progress. • After successful update, message will show like left snapshot. • CRC value may be different from each software. • Press “Reset ” button on EVK. CO • Page 12 of 12 © 2010 WSS CONFIDENTIAL This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter Module FCC ID: BEJ9QK-DWAM82DB The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. End users cannot modify this transmitter device. Any Unauthorized modification could void the user‘s authority to operate this device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : SWon Create Date : 2010:12:17 11:49:19+08:00 Modify Date : 2010:12:28 14:58:34+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2010:12:28 14:58:34+09:00 Format : application/pdf Title : Microsoft Word - 20101026_LG_FCC_TestSW_Manual.doc Creator : SWon Document ID : uuid:205e6f77-d9f2-4cee-8049-e942475c2b51 Instance ID : uuid:7ca74f7c-bd47-4647-a14a-079de97f1dab Page Count : 13EXIF Metadata provided by EXIF.tools