LG Electronics USA 9QK-TWFMB008D WLAN Module User Manual

LG Electronics USA WLAN Module Users Manual

Users Manual

Users manualPRODUCT NAME : WLAN ModuleMODEL NAME : TWFM-B008DThe information contained herein is the exclusive property of LG Innotekand shall not be distributed, reproduced or disclosed in whole or no in partwithout prior written permission of LG Innotek.(00)-0073
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 1 / 9IndexNo Description Page1F21Features22 Product photo 23 Installation 34 Block Diagram 45 Storage Conditions 46 Operating Conditions 57 Test Conditions 58 Pin Description 69 Outline Drawing 710 Packing Information 8Copyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 2 / 91. FeaturesTWFM-B008D is the small size and low power module for IEEE 802.11a/b/g/n wirelessLAN. TWFM-B006D is based on Broadcom BCM43236B solution..IEEE 802.11 a/b/g/n Dual Band WLAN infrastructureSize : 48.0mm x 30.0mm x 6.7mm2.4GHz and 5GHz Internal PATwo stream spatial multiplexing up to 300Mbps(802.11n)Use on-chip OTP (One-Time Programmable)pgUSB 2.0Supports drivers for Linux, WindowsSecurity : WPA,WPA2,AES(TKIP), IEEE 802.1X • Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB2. Module PhotoCopyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 3 / 93. Installation This Wi-Fi module will be installed inside TV.TV R P lTV Rear Panelinstalled positionCableCopyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 4 / 94. Block DiagramBCM43236BANT1USB ConnectorRFSwitch+DiplexerANT2802.11n MAC2.4GHz5GHzPA2 x 2Radio 802.11nPHYSecurityOTP(2K bits)Internal BusGPIOUSB 2.05. Storage ConditionsMain Clock(20MHz)1.2VDC-DC(1.5MHz)3.5VParameterMinMaxUnitCaution : The specifications above the Table define levels at which permanent damageto the device can occur. Function operation is not guaranteed under these conditions.Operating at absolute maximum conditions for extend periods can adversely affect thelong-term reliability of the device.ParameterMinMaxUnitStorage Temperature -10 +80 ℃Storage Humidity (@ 40℃)-90%• Other conditions1) Do not use or store modules in the corrosive atmosphere especially where chloride1) Do not use or store modules in the corrosive atmosphere, especially where chloridegas, sulfide gas, acid, alkali, salt or the like are contained.Also, avoid exposure to moisture.2) Store the modules where the temperatureand relative humidity do not exceed 5 to 40℃and 20 to 60%.3) Assemble the modules within 6 months.Copyrightⓒ. 2013. All Rights Reserved.Check the soldering ability in case of 6 months over.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 5 / 96. Operating ConditionsParameter Min Typ Max UnitOperating Temperature 0 - +60 ℃Operating Humidity (40℃)--85 %Supply Voltage 3.325 3.5 3.675 Vdc7. Test conditions7-1. Macro-environmentTemperature 25 ±5℃Humidity 65 ±5%Input voltageVoltage range7-2. Voltage conditionspgggVDD_3.3V +3.5V ±0.175VCopyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 6 / 98. Pin DescriptionPin No. Pin Name I/O Pin Description1 VCC I VDD 3.5V2 D- I/O USB Communication signal USB_DN3 D+ I/O USB Communication signal USB_DP4 GND - GND5 WOW I Wake On WLAN6NCI NC< TOP View > ANote.1) Recommend a Module install sequence for prevent USB device failure- Supply 3.5V power Cttdtil(USBDPUSBDN)-Connect to data signal (USB_DP, USB_DN)2) If remove the module, proceed in reveres sequence3) Connector : (CONN 12507WR-06L, YEONHO ELECTRONICS CO., LTD.)ACopyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 7 / 99. Outline DrawingCopyrightⓒ. 2013. All Rights Reserved.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 8 / 910. Packing Information• 1 Tray Package Q’ty : 120EA• Tray Material : Antistatic PET or Antistatic PS• 1 Tray Weight : 0.2kg(1 Module Weight : 6.4 ±0.5g)Tray• Total Packing Q’ty : 1,440EA• Total Packing Weight : 12.6±0.8kg• Tray Stacking Q’ty :6 Stack(Zigzag stack)Corrugated FibreboardPP Band• 1 Box Package Q’ty : 720EA• Box Size : A x B x C (512 x 377 x 121.5)• Box Material : Corrugated Fibreboards• 1 Box Packing Weight : 6.3 ±0.4kgBarcode LabelRoHS MarkingInner BoxBarcode LabelRoHS Marking• RoHS Marking :Label, Stamp, Printing• Marking Color : G Rdf St LblCopyrightⓒ. 2013. All Rights Reserved.Gray or Red for Stamp, Label, Printing on the board and etc.Black only for Printing on Label.
User ManualPAGE :REG. DATE : 2014.05.30REV. DATE : 2014.05.30REV.NO : 1.0MODEL NAME : TWFM-B008D 9 / 910. Packing InformationCopyrightⓒ. 2013. All Rights Reserved.
FCC (Regulatory information/warning) §15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. §15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. §2.1091 The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
IC (Regulatory information/warning) RSS-GEN Section 7.1.3 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 RF Exposure L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique. Cet appareil ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou émetteur.

Navigation menu