LG Electronics USA 9QK-W93-T Wireless Speaker Transmitter User Manual UW93 event 080102

LG Electronics USA Wireless Speaker Transmitter UW93 event 080102

user manual

Model: ACC98WK(ACC98WK-T/R),W93-T/R, UW93-T/RP/NO : MFL???????For service/support Call:Toll Free Number1-800-243-0000http://us.lgservice.com©Copyright 2007, LG Electronics U.S.A., Inc.UW93_event_080102  1/4/08  12:01 PM  Page 1
2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.This lightning flash with arrowhead symbol within an equilateral triangle is intend-ed to alert the user to the presence of uninsulated dangerous voltage within theproduct’s enclosure that may be of sufficient magnitude to constitute a risk ofelectric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user tothe presence of important operating and maintenance (servicing) instructions inthe literature accompanying the product.WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THISPRODUCT TO RAIN OR MOISTURE.WARNING: Do not install this equipment in a confined space such as a book case or similarunit.CAUTION: Do not block any ventilation openings. Install in accordance with the manufactur-er's instructions.Slots and openings in the cabinet are provided for ventilation and to ensure reliable operationof the product and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug or othersimilar surface. This product should not be placed in a built-in installation such as a bookcaseor rack unless proper ventilation is provided or the manufacturer's instruction have beenadhered to.NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV systeminstaller’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code providesguidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-ed to the grounding system of the building, as close to the point of the cable entry as practical.FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications areexpressly approved in the instruction manual. The user could lose the authority to operate thisequipment if an unauthorized change or modification is made.REGULATORY INFORMATION: FCC Part 15This epuipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this product does cause harmful interference to radio or television reception, whichcan be determined by turning the product off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the product and receiver. • Connect the product into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.- Labelling information:This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) This device may not cause harmful inter-ference, and (2) This device must accept any interference received, including interference thatmay cause undesired operation.- RF Exposure Statement:The antenna(s) used for this transmitter must be installed to provide a separation distance of atleast 20 cm from all persons and must not be colocated or operating in conjunction with anyantenna or transmitter other than those contained in this device.FCC COMPLIANCE: The responsible party for this product’s compliance is: Marketed and Distributed by LG Electronics U.S.A., Inc.,1000 Sylvan Avenue, Englewood Cliffs, NJ.Phone: 1-201-816-2000.Safety PrecautionCAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENUW93_event_080102  1/4/08  12:01 PM  Page 2
3IMPORTANT SAFETY INSTRUCTIONSCAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguardsincorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.This product does not contain any parts that can be repaired by the user.DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SER-VICE PERSONNEL ONLY.1. Read these instructions. - All these safety and operating instructionsshould be read before the product is operated.2. Keep these instructions. - The safety, operating and use instructionsshould be retained for future reference.3. Heed all warnings. - All warnings on the product and in the operatinginstructions should be adhered to.4. Follow all instructions. - All operating and use instructions should befollowed.5. Do not use this apparatus near water. - For example: near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near aswimming pool; and other areas located near water.6. Clean only with dry cloth. - Unplug this product from the wall outletbefore cleaning. Do not use liquid cleaners.7.Do not block any ventilation openings. Install in accordance with themanufacturer's instructions. - Slots and openings in the cabinet areprovided for ventilation and to ensure reliable operation of the productand to protect it from over-heating. The openings should never beblocked by placing the product on a bed, sofa, rug or other similar sur-face. This product should not be placed in a built-in installation such asa bookcase or rack unless proper ventilation is provided or the manu-facturer’s instructions have been adhered to.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) thatproduce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider thanthe other. A grounding type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are providedfor your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particu-larly at plugs, convenience receptacles, and the point where theyexit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified bythe manufacturer, or sold with the apparatus. When a cart is used,use caution when moving the cart/apparatus combination to avoidinjury from tip-over.13. Unplug this apparatus during lightning storms or when unusedfor long periods of time.14.Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way, suchas power-supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or hasbeen dropped.UW93_event_080102  1/4/08  12:01 PM  Page 3
4ContentsSetting up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6LED indicator of Wireless Transmitter  . . . . . . . . . . . . .7LED indicator of Wireless Receiver  . . . . . . . . . . . . . . .7Setting an ID of Wireless Transmitter . . . . . . . . . . . . . .7CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objectsfilled with liquids, such as vases, should be placed on the apparatus.CAUTION concerning the Power CordMost appliances should be placed on a dedicated circuit;That is, a single outlet circuit which powers only that appliance and has no additional outlets orbranch circuits. Check the specification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extensioncords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of theseconditions could result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and thepoint where the cord exits the appliance.To  disconnect power from the unit, unplug the unit from the outlet. When installing the product,ensure that the plug is easily accessible.Welcome to your new Wireless KitWireless TransmitterExternal dimensions (WxHxD)  149x79x151 mm.Net Weight  0.15 kgTransmission  2.4 GHzPower Supply DC 7.5VWireless ReceiverPower requirements  Refer to main labelPower consumption Refer to main labelExternal dimensions (WxHxD)  111x266x180 mmNet Weight  1.3 kgReception Output  2.4 GHzAmplifier 155 W + 155 WDesigns and specifications are subject to change withoutpior notice.SpecificationsUW93_event_080102  1/4/08  12:01 PM  Page 4
Setting upConnect the red end of each wire to theterminals marked +(plus) and the blackend to the terminals marked - (minus).cc  Connect the wires to the speakers.Connect the other end of each wire to the correct speaker according tothe colour coding:Attaching the speakers to the DVD receiveraa  You will have received four speaker cables.Each one is colour-coded by a band near each end and wires one of thefour speakers to the DVD receiver.bb  Connect the wires to the DVD receiver.Match each wire’s coloured band to the same coloured connection termi-nal on the reverse of the DVD receiver. To connect the cable to the DVDreceiver, press each plastic finger pad to open the connection terminal.Insert the wire and release the finger pad.GreenOrangeRedWhiteCentreSub WooferFrontFrontAbove screen, directly in front of you.In front of you, to the right of thescreen.In front of you, to the left of thescreen.POSITIONSPEAKERCOLOURAttaching the Wireless Tranmitter to the DVDreceiveraa  Connect the adaptor (DC 7V) to the outletand transmitter.bbConnect the SOUND SIGNAL connector of the WirelessTransmitter and rear (right, left) speaker of connectors of themain set with the sound signal cable.cc  Connect the Ground cable to the DVD receiver.Be sure to connect the ground cable rear panel of the unit by using thescrew in rear panel. If this is not connected, the transmitter will not func-tion.5UW93_event_080102  1/4/08  12:01 PM  Page 5
6Attaching the speakers to the WirelessReceiveraa  Connect the power cord of the WirelessReceiver to the outlet.bb  Connect the wires to the WirelessReceiver.Connect the Wireless Receiver and the rearspeaker (right, left) with the speaker cable.Be careful of the following•Set the distance between this unit and Wireless Receiver within 10m.•Optimum performance can be implemented only when the WirelessTransmitter and the Wireless Receiver within distance of 2m to 10m is usedsince communication failure may occur if longer distance is used.•Be sure to match the speaker cable to the appropriate terminal on the com-ponents: + to + and – to –. If the cables are reversed, the sound will be dis-torted  and will lack base.•It takes a few seconds (and may take longer) for the Wireless TransmitterandWireless Receiverto communicate with each other.•When the unit is turned off, the Wireless Transmitter is in standby mode (off)automatically after about 10 minutes.•If the Wireless Transmitter is turned off, the Wireless Receiver will not func-tion.About Ferrite Core Be sure to attach the ferrite core to the speaker cables (for connecting tothis unit).This ferrite core can reduce noises.How to attach the ferrite core 1Press the stopper [a] of the ferrite core to open.2Wind the cable once on the ferrite core. Attach the ferrite core near theunit (Refer to the fig.3 and comment.).3Close the ferrite core unitl it clicks.The lengthhere is asshort as possible.(fig.3)UW93_event_080102  1/4/08  12:01 PM  Page 6
Be careful of the followingIf there is a strong electromagnetic wave product nearby, interference mayoccur. Put the unit (Wireless Receiver and main unit) away from there.(Ex:Micro wave oven)If there is no audio signal for longer than 10 minutes, the Wireless Receiverand Wireless Transmitter will be automatically switched to standby mode. Atpower saving mode, both LEDs will turn red. LEDs will turn blue when there isany audio signal back.If you operate main unit then wireless speakers (rear speakers) sound within afew seconds in standby mode.LED indicator of WirelessTransmitterBLUE The main set is turned on, everything is connected and transmitting.RED The wireless transmitter is in standby mode.OFF (No display) The adaptor is disconnected to the outlet.LED color OperationLED indicator of WirelessReceiverBLUEThe Wireless Receiver is receiving a signal of wireless transmitter.RED The Wireless Receiver is in standby mode.OFF (No display) The Wreless Receiver is turned off.LED color OperationSetting an ID of WirelessTransmitter1Connect the SOUND SIGNAL connector of transmitter and the rear (right, left) speaker terminals of main unit with the SOUND SIGNAL cable..:-2Connect the adaptor (DC 7V) to the outlet and transmitter..:-3Turn off the Wirelsee Receiver:  POWER Swich4Press the ID. for more than 3 seconds:The Blue LED indicator will quickly flicker ID.5Turn on the Wirelsee Receiver:  POWER SwichWhen the unit is manufactured, the ID is already set. If an interferenceoccurs or you use a new Wireless Receiver, an ID is set again.ON Wireless Kit7UW93_event_080102  1/4/08  12:01 PM  Page 7
LG Electronics, Inc.Limited Warranty - USAThis LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the war-ranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good onlyto the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED INDURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDI-RECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMI-TATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights andyou may also have other rights that may vary from state to state.THIS LIMITED WARRANTY DOES NOT APPLY TO:• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate sys-tem components; and• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the require-ments or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical currentor voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial use, or othercauses not arising out of defect in material or workmanship.Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.CUSTOMER INTER-ACTIVE CENTER NUMBERS:WARRANTY PERIOD:LABOR: 90 days from the Date of Purchase.PARTS: One Year from the Date of Purchase.* Parts replaced are warranted for the remaining portion of the original warranty period.HOW SERVICE IS HANDLED:Call 1-800-243-0000 for instructions on getting the defective unit repaired orreplaced.Please retain dated sales receipt and your box to return the unit to LG forrepair or replacement.Shipping both ways will be paid by LG during the first 90 days of the WarrantyPeriod. During the remainder of the Warranty Period (91-365 days), you payinbound shipping charges and LG pays return shipping charges.Visit our website at: http://us.lgservice.comFor nearest Authorized Service Center, Where to buy, ProductAssistance, or Customer AssistanceCall 1-800-243-0000 (24 hours a day, 365 days per year) and selectappropriate options from the menu.Or visit our website at http://us.lgservice.comLG ELECTRONICS U.S.A., INC. 1000 SYLVAN AVENUE ENGLEWOOD CLIFFS, NJ. P/NO : MFLIssue OPrinted in ChinaUW93_event_080102  1/4/08  12:01 PM  Page 8

Navigation menu