LG Electronics USA 9QKE40450 VCR/DVD Recorder User Manual RC69225M AA1ULL 0609

LG Electronics USA VCR/DVD Recorder RC69225M AA1ULL 0609

UserManual.wiki >

LG Electronics USA >

9QKE40450 User Manual

users manual

VCR / DVD RecorderOWNER’S MANUALMODEL: RC68225MLGXBR446Before connecting, operating or adjusting this product,please read this owner’s manual carefully and completely.CD-R/RWCall us and we willguide you throughyour first recording,for free.11--880000--224433--00000000©Copyright 2004, LG Electronics U.S.A., Inc.

2Safety PrecautionsThis lightning flash with arrowhead symbol within anequilateral triangle is intended to alert the user tothe presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of sufficient magnitude to constitute a risk of electricshock to persons. The exclamation point within an equilateral triangleis intended to alert the user to the presence ofimportant operating and maintenance (servicing)instructions in the literature accompanying the product.WARNING: Do not install this equipment in a confined spacesuch as a bookcase or similar unit.NOTE TO CABLE/TV INSTALLER: This reminder is provided tocall the cable TV system installer’s attention to Article 820-40 ofthe National Electric Code (U.S.A.). The code provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.CAUTION:This VCR/DVD Recorder employs a Laser System.To ensure proper use of this product, please read this owner’smanual carefully and retain for future reference. Should theunit require maintenance, contact an authorized service center.Use of controls, adjustments, or the performance of proce-dures other than those specified herein may result in haz-ardous radiation exposure.To prevent direct exposure to laser beam, do not try to openthe enclosure. Visible laser radiation when open. DO NOTSTARE INTO BEAM.CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, suchas vases, should be placed on the apparatus.FCC WARNING: This equipment may generate or use radiofrequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifi-cations are expressly approved in the instruction manual. Theuser could lose the authority to operate this equipment if anunauthorized change or modification is made.REGULATORY INFORMATION: FCC Part 15This product has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the product isoperated in a residential installation. This product generates,uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occurin a particular installation. If this product does cause harmfulinterference to radio or television reception, which can bedetermined by turning the product off and on, the user isencouraged to try to correct the interference by one or moreof the following measures: Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the product into an outlet on a circuit differentfrom that to which the receiver is connected. Consult the dealer or an experienced radio/TV technicianfor help. FCC COMPLIANCE: The responsible party for this product’scompliance is: LG Electronics U.S.A., Inc.,1000 Sylvan Avenue, Englewood Cliffs, NJ.Phone: 1-201-816-2000.SERIAL NUMBER: The serial number is found on the back ofthis unit. This number is for this unit only. You should recordrequested information here and retain this guide as a perma-nent record of your purchase.Model No. ___________________________________Serial No. ___________________________________CAUTION: TO PREVENT ELECTRIC SHOCK, MATCHWIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHEDANS LA BORNE CORRESPONDANTE DE LA PRISE ETPOUSSER JUSQU’AU FOND.WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-TRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TORAIN OR MOISTURE.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICEPERSONNEL.

INTRODUCTION3IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions. - All these safety and oper-ating instructions should be read before the product isoperated.2. Keep these instructions. - The safety, operating anduse instructions should be retained for future refer-ence.3. Heed all warnings. - All warnings on the product andin the operating instructions should be adhered to.4. Follow all instructions. - All operating and useinstructions should be followed.5. Do not use this product near water. – For example:near a bath tub, wash bowl, kitchen sink, laundry tub,in a wet basement; or near a swimming pool; andother areas located near water.6. Clean only with dry cloth. – Unplug this product fromthe wall outlet before cleaning. Do not use liquidcleaners.7.Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions. -Slots and openings in the cabinet are provided forventilation and to ensure reliable operation of theproduct and to protect it from over- heating. The open-ings should never be blocked by placing the producton a bed, sofa, rug or other similar surface. This prod-uct should not be placed in a built-in installation suchas a bookcase or rack unless proper ventilation is pro-vided or the manufacturer’s instructions have beenadhered to.8. Do not install near any heat sources such as radi-ators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9.Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug has twoblades with one wider than the other. A ground-ingtype plug has two blades and a third ground-ing prong. The wide blade or the third prong areprovided for your safety. If the provided plug doesnot fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10. Protect the power cord from being walked on orpinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe product.11. Only use attachments/accessories specified bythe manufacturer.12. Use only with the cart, stand, tripod, bracket, ortable specified by the manufacturer, or sold withapparatus. When a cart is used, use cautionwhen moving the cart/product combination toavoid injury from tip-over.13. Unplug this product during lightning storms orwhen unused for long periods of time.14.Refer all servicing to qualified service personnel.Servicing is required when the product has beendamaged in any way, such as power-supply cordor plug is damaged, liquid has been spilled orobjects have fallen into the product, the producthas been exposed to rain or moisture, does notoperate normally, or has been dropped.CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.This product has been designed and manufactured to assure personal safety. Improper use can result in electricshock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-dures for installation, use, and servicing.This product does not contain any parts that can be repaired by the user.DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

4Table of ContentsINTRODUCTIONSafety Precautions. . . . . . . . . . . . . . . . . . . . . . . 2IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 3Table of Contents . . . . . . . . . . . . . . . . . . . . . . 4-5LGXBR342 Overview. . . . . . . . . . . . . . . . . . . . 6-9Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6Disc-related terms . . . . . . . . . . . . . . . . . . . . . . 6Types of video CDs . . . . . . . . . . . . . . . . . . . . . 6About DVD-R and DVD-RW disc. . . . . . . . . . . . 7•What are “Recording modes”? . . . . . . . . . . 7•Is editing a DVD like editing a video tape? . 7•About word ‘Original’ and ‘Playlist’ . . . . . . . 7About DVD recording. . . . . . . . . . . . . . . . . . . 7-8•Disc types and recording formats, modes, and settings . . . . . . . . . . . . . . . . . . . . . . . . 7•Notes for recording. . . . . . . . . . . . . . . . . . . 8•Recording TV audio channels. . . . . . . . . . . 8•Restrictions on video recording. . . . . . . . . . 8•What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . 8•Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . 8Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 9•Handling the unit . . . . . . . . . . . . . . . . . . . . 9•Cleaning the unit . . . . . . . . . . . . . . . . . . . . 9•Remote Control Operation Range. . . . . . . . 9•Remote Control Battery Installation . . . . . . 9Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . 9•Handling discs . . . . . . . . . . . . . . . . . . . . . . 9•Storing discs . . . . . . . . . . . . . . . . . . . . . . . 9•Cleaning discs . . . . . . . . . . . . . . . . . . . . . . 9About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 9•About the symbol display . . . . . . . . . . . . 9•About the disc symbols for instructions. . . . 9Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Function Display Window . . . . . . . . . . . . . . . . 11Remote Control Overview . . . . . . . . . . . . . . . . 12Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13DVR HOOKUPConnections . . . . . . . . . . . . . . . . . . . . . . . . 14-17Connecting Antenna/Cable TV to VCR/DVD Recorder . . . . . . . . . . . . . . . . . . . . 14Connecting to a TV. . . . . . . . . . . . . . . . . . . . . 15Connecting to Optional Equipment . . . . . . . . . 16Accessory Audio/Video (A/V) Connections to VCR/DVD Recorder . . . . . . . . . . . . . . . . . . 17Connecting a Digital Camcorder . . . . . . . . . . . 17Before Operation. . . . . . . . . . . . . . . . . . . . . 18-29Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . 18•General Operation . . . . . . . . . . . . . . . . . . 18GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . 18-20•Tuning Band Select . . . . . . . . . . . . . . . . . 18•Auto Channel Set. . . . . . . . . . . . . . . . . . . 18•To Add or Erase Channels from Memory . 19•Auto Clock Set . . . . . . . . . . . . . . . . . . . . . 19•Manual Clock Set. . . . . . . . . . . . . . . . . . . 19•TV Aspect Ratio . . . . . . . . . . . . . . . . . . . . 20•Progressive Scan . . . . . . . . . . . . . . . . . . . 20•Factory Setting. . . . . . . . . . . . . . . . . . . . . 20LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . 20•Display Menu . . . . . . . . . . . . . . . . . . . . . . 20•Disc Language . . . . . . . . . . . . . . . . . . . . . 20AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21•Dolby Digital. . . . . . . . . . . . . . . . . . . . . . . 21•DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21•MPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . 21•Sampling Freq. (Frequency) . . . . . . . . . . . 21•DRC (Dynamic Range Control) . . . . . . . . 21•Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21LOCK (Parental Control) . . . . . . . . . . . . . . 22-23•Movie Rating . . . . . . . . . . . . . . . . . . . . . . 22•Set Password. . . . . . . . . . . . . . . . . . . . . . 22•Country Code. . . . . . . . . . . . . . . . . . . . . . 23RECORD. . . . . . . . . . . . . . . . . . . . . . . . . . 23-24•DISC Record Mode . . . . . . . . . . . . . . . . . 23•VCR Record Mode . . . . . . . . . . . . . . . . . . 23•DV Record Audio . . . . . . . . . . . . . . . . . . . 24•Auto Chapter . . . . . . . . . . . . . . . . . . . . . . 24DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25•DISC Initialize . . . . . . . . . . . . . . . . . . . . . 24•DISC Finalize. . . . . . . . . . . . . . . . . . . . . . 25•DISC Protect . . . . . . . . . . . . . . . . . . . . . . 25•PBC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25•DISC Name . . . . . . . . . . . . . . . . . . . . . . . 26General Explanation of On-Screen Display . . . 27•Displaying Information on-screen . . . . . . . 27•Displaying OSD While Watching TV . . . . . 27•Changing TV Channels . . . . . . . . . . . . . . 27•Changing TV Audio Channel. . . . . . . . . . . 27OSD Menu Options by Media Type . . . . . . 28-29•DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28•VR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28•Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29•VCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29•VHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Table of ContentsPLAYBACKOperation with DVD and Video CD. . . . . . . 30-33Playing a DVD or Video CD . . . . . . . . . . . . 30-33•Moving to another TITLEs . . . . . . . . . . . . 30•Moving to another CHAPTER/TRACKs. . . 30•Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 30•Still Picture and Frame-by-Frame Playback. 31•Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 31•Random . . . . . . . . . . . . . . . . . . . . . . . . . . 31•Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . 31•Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 31•Time Search. . . . . . . . . . . . . . . . . . . . . . . 32•Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32•Marker Search . . . . . . . . . . . . . . . . . . . . 32•Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 32•Title Menu . . . . . . . . . . . . . . . . . . . . . . . . 32•Camera Angle . . . . . . . . . . . . . . . . . . . . . 33•Changing the Audio Language . . . . . . . . . 33•Changing the Audio Channel . . . . . . . . . . 33•3D Surround . . . . . . . . . . . . . . . . . . . . . . 33•Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . 33•Finding Locations on a Disc . . . . . . . . . . . 33•Last Condition Memory. . . . . . . . . . . . . . . 33Audio CD and MP3 Operation. . . . . . . . . . . 34-35Playing an Audio CD or MP3 Disc. . . . . . . . . . 34Notes on MP3 Recordings . . . . . . . . . . . . . . . 34•Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . 35•Moving to Another Track. . . . . . . . . . . . . . 35•Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . 35•Random . . . . . . . . . . . . . . . . . . . . . . . . . . 35•Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 35•Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 35Programmed Playback with Audio CD and MP3. 36•Repeat Programmed Tracks . . . . . . . . . . 36•Erasing a Track from the Program List . . . 36•Erasing the multi tracks on the Program List . . . . . . . . . . . . . . . . . 36•Changing the order of Program List . . . . . 36Photo Disc Operation. . . . . . . . . . . . . . . . . . . . . 37Viewing a Photo Disc . . . . . . . . . . . . . . . . . . . 37•Selecting other Files. . . . . . . . . . . . . . . . . 37•To rotate the picture . . . . . . . . . . . . . . . . . 37•To view Slide Show . . . . . . . . . . . . . . . . . 37•Notes on JPEG Files . . . . . . . . . . . . . . . . 37VCR Mode Tape Playback . . . . . . . . . . . . . . . . 38Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . 38Normal Playback . . . . . . . . . . . . . . . . . . . . . . 38•Tracking Control. . . . . . . . . . . . . . . . . . . . 38Special Effect Playback. . . . . . . . . . . . . . . . . . 38•Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 38•Still Picture andFrame-by-Frame Playback . . . . . . . . . . . . 38•Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 38•Counter Memory Function . . . . . . . . . . . . 38RECORDINGBasic Recording . . . . . . . . . . . . . . . . . . . . . 39-40Basic Recording from a TV . . . . . . . . . . . . . . . 39Instant Timer Recording . . . . . . . . . . . . . . . . . 39Copying from DVD to VCR . . . . . . . . . . . . . . . 40Copying from VCR to DVD . . . . . . . . . . . . . . . 40Timer Recording . . . . . . . . . . . . . . . . . . . . . . . 41Checking Timer Recording Details . . . . . . . . . 41Canceling a Timer Recording . . . . . . . . . . . . . 41Stopping a Timer Recording in Progress . . . . . 41Timer Recording Troubleshooting . . . . . . . . . . 41Recording from an External Input . . . . . . . 42-43Recording from External Components. . . . . . . 42Recording from a Digital Camcorder . . . . . . . . 42Playing Recordings on Other DVD players. . . . . 42•Finalizing a Disc. . . . . . . . . . . . . . . . . . . . 42What is DV? . . . . . . . . . . . . . . . . . . . . . . . . . . 43•DV-Related Messages . . . . . . . . . . . . . . . 43•Troubleshooting . . . . . . . . . . . . . . . . . . . . 43EDITINGVR Mode: Original and Playlist Editing . . . 44-50Titles, Chapters and Parts. . . . . . . . . . . . . . . . 44Adding Chapter Markers . . . . . . . . . . . . . . . . . 44Changing Title or Chapter Thumbnails . . . . . . 44Using the Original (Title) menu . . . . . . . . . . . . 45Using the Original (Chapter) menu . . . . . . . . . 45Using the Playlist (Title) menu. . . . . . . . . . . . . 46Using the Playlist (Chapter) menu. . . . . . . . . . 46Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . 47Deleting an Original or Playlist Title/Chapter . . 47Making a New Playlist. . . . . . . . . . . . . . . . . . . 48Adding Titles/Chapters to the Playlist . . . . . . . 48Combining Two Chapters Into One . . . . . . . . . 49Moving a Playlist Chapter . . . . . . . . . . . . . . . . 49Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . 50Video Mode: Original editing . . . . . . . . . . . . . . 51Using the Title List . . . . . . . . . . . . . . . . . . . . . 51Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . 51If the disc has already been finalized . . . . . . . 51REFERENCEControlling Your TV with the Supplied Remote . . . . . . . . . . . . . . . . 52Language Code List. . . . . . . . . . . . . . . . . . . . . 53Country Code List . . . . . . . . . . . . . . . . . . . . . . 54Troubleshooting . . . . . . . . . . . . . . . . . . . . . 55-56Specifications . . . . . . . . . . . . . . . . . . . . . . . 57-58About the symbols for instructionsIndicates hazards likely to cause harm to the unititself or other material damage.Indicates special operating features of this unit.Indicates tips and hints for making the task easier.INTRODUCTION5

6LGXBR342 OverviewRecordable Discs12cm/8cm, single-sided, single layer disc Approx. max. recording time (LP mode): 240 minutes (4.7GB), 80 minutes (1.46GB)12cm/8cm, single-sided, single layer disc Approx. max. recording time (LP mode): 240 minutes (4.7GB), 80 minutes (1.46GB)otes–This recorder cannot record CD-R or CD-RW discs.–DVD-R/RW and CD-R/RW discs recorded using apersonal computer or a DVD or CD recorder may notplay if the disc is damaged or dirty, or if there is dirt ofcondensation on the recorder’s lens.–If you record a disc using a personal computer, evenif it is recorded in a compatible format, there arecases in which it may not play because of the settingsof the application software used to create the disc.(Check with the software publisher for more detailedinformation.)Playable DiscsDVD (8 cm/12 cm disc)Video CD (VCD) (8 cm / 12 cm disc)Audio CD (8 cm/12 cm disc)In addition, the VCR/DVD Recorder can playDVD±R/DVD±RW discs, CD-R/CD-RW discs that contain audio titles, MP3 files, SVCD file or JPEG filesand Kodak Picture CDs.otes–Depending on the conditions of the recording equip-ment or the CD-R/RW (or DVD±R/±RW) disc itself,some CD-R/RW (or DVD±R/±RW) discs cannot beplayed on the unit.–Do not attach any seal or label to either side (thelabeled side or the recorded side) of a disc.–Do not use irregularly shaped CDs (e.g., heart-shapedor octagonal). Doing so may result in malfunctions.Regional code of the VCR/DVD Recorder and DVDsThis VCR/DVD Recorder is designed and manu-factured for playback of Region 1 encoded DVDsoftware. The region code on the labels of someDVD discs indicates which type of VCR/DVDRecorder can play those discs. This unit can play onlyDVD discs labeled 1 or ALL. If you try to play any otherdiscs, the message “Incorrect region code. Can’t play-back” will appear on the TV screen. Some DVD discsmay not have a region code label even though their play-back is prohibited by area limits.otes on DVDs and Video CDsSome playback operations of DVDs and Video CDsmay be intentionally fixed by software manufacturers.As this unit plays DVDs and Video CDs according todisc content designed by the software manufacturer,some playback features of the unit may not be availableor other functions may be added.Refer also to the instructions supplied with the DVDsand Video CDs. Some DVDs made for business pur-poses may not be played on the unit.Disc-related termsTitle (DVD only)The main film content or accompanying feature contentor music album.Each title is assigned a title reference number enablingyou to locate it easily.Chapter (DVD only)Sections of a picture or a musical piece that are smallerthan titles. A title is composed of one or several chap-ters. Each chapter is assigned a chapter number toenable you to locate the chapter you want. Dependingon the disc, chapters may not be labeled.Track (Video CD and audio CD only)Sections of a picture or a musical piece on a video CDor an audio CD. Each track is assigned a track number,enabling you to locate the track you want.SceneOn a video CD with PBC (Playback Control), moviesand pictures are divided into “Scenes”. Each scene isdisplayed on a menu and assigned a number, enablingyou to quickly locate the scene you want. A scene maybe composed of one or several tracks.Types of video CDsThere are two types of video CDs:Video CDs equipped with PBC (Version 2.0)PBC (Playback control) allows you to interact with thecontents of a Video CD using menus, search functions,and other special operations. High resolution picturescan be displayed if they are included on the disc.Video CDs not equipped with PBC (Version 1.1)Video CDs without PBC are similar to audio CDs,except they allow playback of video as well as sound.1

INTRODUCTION7LGXBR342 Overview (Continued)About DVD-R and DVD-RW discHow are DVD-R and DVD-RW discs different?The essential difference between DVD-R and DVD-RWis that DVD-R is a record-once medium, while DVD-RWis a re-recordable/erasable medium. You can re-record/erase a DVD-RW disc approximately 1,000 times.Can I play my recordable discs in a regular DVDplayer?Generally, DVD-R discs and DVD-RW discs recorded inVideo mode are playable in a regular DVD player, butthey must be ‘finalized’ first. This process fixes the con-tents of the disc to make them readable to other DVDplayers as DVD-Video discs.DVD-RW discs recorded in VR (Video Recording) modeare playable in some players.This indicates a product feature that is capa-ble of playing DVD-RW discs recorded withVideo Recording (VR) format.What are “Recording modes”?There are two recording modes available using thisrecorder: VR mode and Video mode. When recording toa DVD-R disc, recordings are always in Video mode.DVD-RW discs can be formatted for VR mode recordingor Video mode recording.VR mode recording•3 different picture quality/recording time settings avail-able (SP, LP, XP)•Not playable on regular DVD players•Recordings can be extensively editedVideo mode recording•3 different picture quality/recording time settings avail-able (SP, LP, XP)•Playable on regular DVD players (after finalizing)•Limited editing featuresMany functions of this recorder are dependent on therecording mode. One or more of the symbols ( , ) appears by each function explainedin this manual so that you can see at a glance whetherit’s relevant for the disc loaded.You can find more information on disc formats andrecording modes on next page.oteDVD-Video Format (Video mode) is a new format forrecording on DVD-R/RW discs that was approved bythe DVD Forum in 2000. You may therefore experienceproblems playing recordable DVD discs in some play-ers. Symptoms include video artifacts, audio and/orvideo dropouts and playback suddenly stopping.Our company cannot take responsibility for problemsplaying discs recorded on this VCR/DVD Recorder inother players.Is editing a DVD like editing a video tape?No. When you edit a video tape you need one videodeck to play the original tape and another to record theedits. With DVD, you edit by making a ‘Playlist’ of whatto play and when to play it. On playback, the VCR/DVDRecorder plays the disc according to the Playlist.About word ‘Original’ and ‘Playlist’Throughout this manual, you will often see the wordsOriginal and Playlist to refer to the actual content andthe edited version.•Original: content refers to what’s actually recordedon the disc.•Playlist: content refers to the edited version of thedisc — how the Original content is to be played.About DVD recordingotes•This recorder cannot make recordings on CD-R orCD-RW discs.•Our company takes no responsibility for recording fail-ure due to power cuts, defective discs, or damage tothe recorder.•Fingerprints and small scratches on a disc can affectplayback and/or recording performance. Please takeproper care of your discs.Disc types and recording formats, modes, and settingsThis recorder can play three different kinds of DVD disc:pre-recorded DVD-Video discs, DVD-RW and DVD-Rdiscs. The disc format for DVD-R discs is always “Videoformat”—the same as pre-recorded DVD-Video discs.This means that once finalized, you can play a DVD-Rin a regular DVD player.The recording mode is closely related to the disc for-mat. If the disc format is Video Recording format, thenthe recording mode is VR mode; if the disc format isVideo mode, then the recording mode is Video mode(except for DVD-Video, which is not recordable, and sodoes not have a recording mode).Within the recording modes (which are fixed for thewhole disc) are the record settings. These can bechanged as required for each recording and determinethe picture quality and how much space the recordingwill take up on the disc.VRVideo

LGXBR342 Overview (Continued)Notes for recording•The recording times shown are not exact because theVCR/DVD Recorder uses variable bit-rate video com-pression. This means that the exact recording timewill depend on the material being recorded.•When recording a TV broadcast, if the reception ispoor or the picture contains interference, the record-ing times may be shorter.•If you record still pictures or audio only, the recordingtime may be longer.•The displayed times for recording and time remainingmay not always add up to exactly the length of thedisc.•The recording time available may decrease if youheavily edit a disc.•If using a DVD-RW disc, make sure you change therecording format (Video mode or VR mode) beforeyou record anything on the disc. See page 24 (DISCInitialize) for how to do this.•When using a DVD-R disc, you can keep recordinguntil the disc is full, or until you finalize the disc.Before you start a recording session, check theamount of recording time left on the disc.•When using a DVD-RW disc in Video mode, recordingtime available will only increase if you erase the lasttitle recorded on the disc.•The Erase Title option in the Original (Title) menu onlyhides the title, it does not actually erase the title fromthe disc and increase the recording time available(except for the last recorded title on a DVD-RW discin Video mode).Recording TV audio channelsThis recorder can record one or two channel audio. ForTV broadcasts, this usually means mono or stereo, butsome programs are broadcast with a main and a SAP(Secondary Audio Program) audio channel.If you’re recording in Video mode (or in VR mode), youcan record either the main audio or the SAP audio.Restrictions on video recording•You cannot record copy-protected video using thisrecorder. Copy-protected video includes DVD-Videodiscs and some satellite broadcasts. If copy-protectedmaterial is encountered during a recording, recordingwill pause or stop automatically and an error messagewill be displayed on-screen.•Video that is ‘copy-once only’ can only be recordedusing a DVD-RW disc in VR mode with CPRM (seebelow).What is ‘CPRM’?CPRM is a copy protection system (with scramble sys-tem) only allowing the recording of ‘copy once’ broad-cast programs. CPRM stands for Content Protection forRecordable Media.This recorder is CPRM compatible, which means thatyou can record copy-once broadcast programs, but youcannot then make a copy of those recordings. CPRMrecordings can only be made on DVD-RW discs format-ted in VR mode, and CPRM recordings can only beplayed on players that are specifically compatible withCPRM.Copyright•Audio and video recordings you make using thisrecorder are for your personal use only. You may notsell, lend or rent them to other people.•This product incorporates copyright protection tech-nology that is protected by method claims of certainU.S.patents and other intellectual property rightsowned by Macrovision Corporation and other rightsowners. Use of this copyright protection technologymust be authorized by Macrovision Corporation, andis intended for home and other limited viewing usesonly unless otherwise authorized by Macrovision cor-poration. Reverse engineering or disassembly is pro-hibited.8Disc type Disc format Recording mode FunctionsDVD-Video Video format n/a Playback onlyDVD-RW Video Recording VR mode Playback, recording, Original/Playlist editingformat (default)Video format Video mode Playback, limited recording, limited editingDVD-R Video format Video mode Playback, limited recording, limited editingDVD+R Video format n/a Playback onlyDVD+RW Video format n/a Playback only

INTRODUCTION9LGXBR342 Overview (Continued)PrecautionsHandling the unitWhen shipping the unitThe original shipping carton and packing materialscome in handy. For maximum protection, re-pack theunit as it was originally packaged at the factory.When setting up the unitThe picture and sound of a nearby TV, VCR, or radiomay be distorted during playback. In this case, positionthe unit away from the TV, VCR, or radio, or turn off theunit after removing the disc.To keep the surface cleanDo not use volatile liquids, such as insecticide spray,near the unit. Do not leave rubber or plastic products incontact with the unit for a long period of time. They willleave marks on the surface.Cleaning the unitTo clean the cabinetUse a soft, dry cloth. If the surfaces are extremely dirty,use a soft cloth lightly moistened with a mild detergentsolution. Do not use strong solvents such as alcohol,benzine, or thinner, as these might damage the surfaceof the unit.To obtain a clear pictureThe VCR/DVD Recorder is a high-tech, precisiondevice. If the optical pick-up lens and disc drive partsare dirty or worn, the picture quality will be poor.Regular inspection and maintenance are recommendedafter every 1,000 hours of use. (This depends on theoperating environment.)For details, please contact your nearest dealer.Remote Control Operation RangePoint the remote control at the remote sensor and pressthe buttons.Distance: About 23 ft (7 m) from the front of theremote sensor.Angle: About 30° in each direction of the front of theremote sensor.Remote Control Battery InstallationDetach the battery cover on the rear ofthe remote control, and insert two AAAbatteries with and aligned cor-rectly.CautionDo not mix old and new batteries. Never mix differenttypes of batteries (standard, alkaline, etc.).Notes on DiscsHandling discsDo not touch the playback side of the disc. Hold thedisc by the edges so that fingerprints will not get on thesurface. Do not stick paper or tape on the disc.Storing discsAfter playing, store the disc in its case.Do not expose the disc to direct sunlight or sources ofheat, or leave it in a parked car exposed to direct sun-light, as there may be a considerable temperatureincrease inside the car.Cleaning discsFingerprints and dust on the disc can cause poor pic-ture quality and sound distortion. Before playing, cleanthe disc with a clean cloth. Wipe the disc from the cen-ter outward.Do not use strong solvents such as alcohol, benzine,thinner, commercially available cleaners, or anti-staticspray intended for older vinyl records.About SymbolsAbout the symbol display“ ” may appear on the TV screen during operation.This icon means the function explained in this owner’smanual is not available on that specific disc.About the disc symbols for instructionsAsection whose title has one of the following symbols areapplicable only to those discs represented by the symbol.DVD-R/RW with Video recording modeDVD-RW with VR recording modeDVD-Video discVideo CDs.Audio CDs.MP3 Discs.JPEG Discs.VHS Tape.VHSJPEGMP3CDVCDDVDVRVideoNoYes

10Front PanelREC (z) button Starts recording. Pressrepeatedly to set therecording time.CHANNEL (v/ V)Scans up or downthrough memorizedchannels.PLAY (N)To play back a disc or tape. OPEN/CLOSE (Z)Opens or closes the disc tray.AV2 IN (VIDEO / AUDIO (Left/Right)) Connect the audio/video output of an external source(Audio system, TV/ Monitor, VCR, Camcorder, etc.).S-VIDEO IN Connect the S-Video output of an external source (TV/ Monitor, VCR, Camcorder, etc.).DV INPUTConnect the DV output of adigital camcorder.PAUSE/STEP (X/C)Pause playback or recording temporarily/press repeatedly forframe-by-frame playback.Disc Tray (DVD deck)Insert a disc here.POWER button and indicatorSwitches the VCR/DVD Recorder ON and OFF. Lights green when the VCR/DVD Recorder is turned on.STOP (x)Stops playback.COPYPress to copy DVD to VCR(or VCR to DVD).Cassette Compartment (VCR deck)Insert a video cassette here.EJECTEjects the tape in the VCR deck.DVD/VCRToggles control between the DVDdeck and the VCR deck.FORWARD (M/>)DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.VCR: Advances the tape during the STOP mode or for fast forward picture search.BACKWARD (./m)DVD: Go to beginning of current chapter/track or to previous chapter/track. Press and hold for a fast reverse search.VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.Display window Shows the current status ofthe VCR/DVD Recorder.Remote SensorPoint the VCR/DVD Recorderremote control here.

11INTRODUCTIONFunction Display WindowDVDPRG TTL VR TRK CHP TV SAP COPYHi-Fi STXP SP S LPSVCDAB-R WRECST Indicates a stereo broadcast isbeing received.Disc type indicatorsIndicates the type of disc loaded.Hi-Fi Indicates when the VCR/DVD Recorder is playing or recording a tape in Hi-Fi.COPY Indicates that a DVD to VCR (or VCR to DVD) copy is in progress.SAP Indicates when a SAP BILINGUAL broadcast is being received.Character indicatorsIndicates clock, total playing time, elapsed time, remainingtime, title number, chapter/track number, channel, etc.REPEAT Indicates repeat mode.REC The recorder isrecording.Indicates when the recorderis in timer recording or a timerrecording is programmed.SP, SLP, LP, XPIndicates the current Recording mode.PRG Programmed playback activeTTL Indicates current title.Adisc is inserted in the DVD deck.AVHS tape is inserted in the VCR deck.Indicates a DVD-RW disc (VR mode only) is inserted in theDVD deck.CHP/TRK Indicates current chapter or track number TV The unit’s functions are available and channelsare selected at TV.Indicates when the VCR/DVD Recorder is Locked.

12Remote Control OverviewPOWERTurns VCR/DVD Recorder ON and OFF.DVD Select the VCR/DVD Recorder’s func-tion mode to DVD. VCR Select the VCR/DVD Recorder’s func-tion mode to VCR. INPUT Changes the input to use for recording(Tuner, AV1, AV2, or DV IN).0-9 numerical buttonsSelects numbered options in a menu.Selects TV’s channel.TV/VCR To view channels selected by the VCRtuner or by the TV tuner.BACKWARD / FORWARD (m/M)- DVD: Search backward or forward.- VCR: Rewinds/Advances the tape dur-ing the STOP mode, for fast reverse/forward picture search.SKIP (./ >)Go to next chapter or track. Returns tobeginning of current chapter or track orgo to previous chapter or track.PAUSE/STEP (X) Pause playback or recording temporari-ly, press again to exit pause mode.press repeatedly for frame-by-frameplayback.N(PLAY)Starts playback.STOP (x)Stops playback or recording.AUDIOSelects an audio language (DVD). SUBTITLESelects a subtitle language.ANGLESelects a DVD camera angle, if available.ZOOMEnlarges DVD video image.REPEATRepeat chapter, track, title or all.A-BRepeats sequence between two points(A and B)RANDOMPlays tracks in random order.LOCKLocks/unlocks front panel buttons.EJECT, OPEN/CLOSE - Opens and closes the disc tray.- Ejects the tape in the VCR deck.TV Control Buttons-POWER: Switches TV ON and OFF.-INPUT: Selects the TV’s source.-CH +/–: Selects TV’s channel.-VOL +/–: Adjusts TV’s volume.-MUTE: Turns on or off TV sound.REC (z)Starts recording. Press repeatedly to setthe recording time.TIMER RECDisplays Timer Record menu.REC MODESelects the recording mode: - DVD : SP, LP, or XP.- VCR : SP or SLP.MARKERMarks any point during playback.SEARCHDisplays Marker Search menu.COPYPress to copy DVD to VCR (or VCR toDVD).LIST / DISC MENUAccesses menu on a DVD disc.Switches between Original and Playlistediting in VR mode.SETUPAccesses or removes the Setup menu.DISPLAYAccesses On-Screen Display.Displays information while viewing a TVprogram. RETURN (O)-Removes the menu.bBvV(left/right/up/down)Selects menu options.CH/TRK(v/V): Selects a program.Adjusts manually the tape’s pictureonscreen.ENTERConfirms menu selections.TITLEDisplays the disc’s Title menu, if available.CHP ADDInserts a chapter marker when playing/recording a DVD-RW disc in VR mode.THUMBNAILSelects a thumbnail picture for the current title for use in the Original (Title).CLEARRemoves a mark on the Marker Searchmenu.LOCKThe Lock feature disables thefront panel buttons to preventchildren from tampering withthe VCR/DVD Recorder.Simply press LOCK on theremote control to toggle thisfeature on and off.

INTRODUCTION13Rear PanelCautionDo not touch the inner pins of the jacks on the rearpanel. Electrostatic discharge may cause permanentdamage to the unit.ANT.INConnect the VHF/UHF/CATV antenna to this terminal.COAXIAL (DIGITAL AUDIO OUT jack) Connect to digital (coaxial) audio equipment.AUDIO OUT (Left/Right)Connect to a TV or other equipment with audioinputs.A/V OUT (VIDEO OUT/AUDIO OUT (Left/Right))Connect to a TV with video and audio inputs.COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)Connect to a TV with Y Pb Pr inputs.AV 1 IN (VIDEO IN /AUDIO IN (Left/Right))Connect the audio/video output of an external source(Audio system, TV/Monitor, VCR, Camcorder).AC Power CordPlug into thepower source.S-VIDEO OUTConnect to a S-Video Input on TV.OPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment.RF. OUT (DVD/VCR OUT)Connect to a TV with RF coaxial inputs.

ConnectionsipsDepending on your TV and other equipment you wishto connect, there are various ways you could connectthe VCR/DVD Recorder. Use only one of the connec-tions described below.Please refer to the manuals of your TV, VCR, StereoSystem or other devices as necessary to make thebest connections.For better sound reproduction, connect the recorder’sAUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment.See “Connecting to Optional Equipment” on page 16.CautionMake sure the VCR/DVD Recorder is connecteddirectly to the TV. Tune the TV to the correct videoinput channel.Do not connect the VCR/DVD Recorder’s AUDIOOUT jack to the phono in jack (record deck) of youraudio system.Do not connect your VCR/DVD Recorder via yourVCR. The DVD image could be distorted by the copyprotection system. Connecting Antenna/Cable TV toVCR/DVD Recorder11Disconnect the antenna leads from the rear of theTV.22Identify the type of cable from your antenna. If it isa round cable as illustrated, it is a 75 ohm coaxialantenna cable. This cable will connect directly tothe jack marked ANT.IN on your Recorder.ipIf your antenna lead wire is a flat type antenna cable,connect it to an Antenna Adapter (300-ohm to 75-ohm)(not supplied) and slip the Adapter onto the ANT.IN jack. The Adapter does not screw on to the VCR/DVDRecorder, it just slips over the jack.Cable Service Without Cable BoxIf your cable wire is connected to your TV without a converteror descrambler box, unscrew the wire from your TV and attachit to the ANT.IN jack on the VCR/DVD Recorder. Use thesupplied round coaxial cable to connect between theVCR/DVD Recorder’s OUT TO TV jack and the 75 ohm anten-na input jack on the TV. With this connection, you can receiveall midband, super band, and hyperband channels. (All cablechannels.)Cable Service With Cable BoxIf a converter is required in your cable system, follow theinstruction below:The cable hookup permits both TV and VCR/DVD Recorderoperation. To view or record a CATV channel1Tune the TV to the correct video input channel.2Set the VCR/DVD Recorder channel selector to the outputchannel of the Cable Converter box using CH (v/ V) ornumber (0-9) of your VCR/DVD Recorder. (Example: CH3)3Select the channel to view at the Cable Converter Box.oteIf you are using a cable box to tune channels, it is not neces-sary to do Auto Channel Set as indicated on page 18.14Antenna AntennaFlat Wire(300 ohm)300/75 ohmAdaptor(Not supplied)Cable TVWall JackOR ORRear of VCR/DVD RecorderCable TVWall JackBack Panel ofTypical Cable BoxRear of VCR/DVD Recorder

DVR HOOKUP15Connections (Continued)Connecting to a TVMake one of the following connections, depending onthe capabilities of your existing equipment.RF coaxial connectionConnect the RF.OUT jack on the VCR/DVD Recorder tothe antenna in jack on the TV using the 75-ohm CoaxialCable supplied (R).oteIf you use this connection, tune the TV to the VCR/DVDRecorder’s RF output channel (CH 3 or 4).How to set the VCR/DVD Recorder’s RF outputchannel When the VCR/DVD Recorderis turned off, press andhold CH (v/V) on the front panel for about five seconds to change the RF output channel (CH 03 orCH 04). “RF 03” or “RF 04” appears in the display win-dow.Audio/Video connection 11Connect the VIDEO OUT jack on the VCR/DVDRecorder to the video in jack on the TV using thevideo cable (V).22Connect the Left and Right AUDIO OUT jacks fromthe VCR/DVD Recorder to the audio left/right injacks from the TV using the audio cables (A).S-Video connection 11Connect the S-VIDEO OUT jack on the VCR/DVDRecorder to the S-Video in jack on the TV using theS-Video cable (S).22Connect the Left and Right AUDIO OUT jacks fromthe VCR/DVD Recorder to the audio left/right injacks on the TV using the audio cables (A).Component Video (Color Stream®) connection11Connect the COMPONENT/PROGRESSIVE SCANVIDEO OUT jacks on the VCR/DVD Recorder tothe corresponding in jacks on the TV using an Y PbPr cable (C).22Connect the Left and Right AUDIO OUT jacks fromthe VCR/DVD Recorder to the audio left/right injacks on the TV using the audio cables (A).Progressive Scan (ColorStream®pro) connectionIf your television is a high-definition or “digital ready”television, you may take advantage of the VCR/DVDRecorder’s progressive scan output for the highestvideo resolution possible. If your TV does not accept the Progressive Scan for-mat, the picture will appear scrambled if you tryProgressive Scan on the VCR/DVD Recorder.11Connect the COMPONENT/PROGRESSIVE SCANVIDEO OUT jacks on the VCR/DVD Recorder tothe corresponding in jacks on the TV using anoptional Y Pb Pr cable (C).22Connect the Left and Right AUDIO OUT jacks fromthe VCR/DVD Recorder to the audio left/right injacks on the TV using the supplied audio cables(A).otes–Set Progressive Scan option to “ON” in the Generalmenu, see page 20.–Progressive Scan does not work with the RF,Audio/Video or S-Video connections.ANTENNAINPUTLRYPbPrCOMPONENT/PROGRESSIVE VIDEO INPUTAUDIO INPUTVIDEO INPUTS-VIDEO INPUTRRear of TVRear of VCR/DVD RecorderS AV C

Connections (Continued)16Connecting to Optional EquipmentConnecting to an amplifier equipped with twochannel analog stereo or Dolby Pro Logic ll/Pro LogicConnect the Left and Right AUDIO OUT jacks on theVCR/DVD Recorder to the audio left and right in jackson your amplifier, receiver, or stereo system, using theaudio cables (A).Connecting to an amplifier equipped with twochannel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channeldecoder (Dolby Digital™, MPEG 2, or DTS)11Connect one of the VCR/DVD Recorder’s DIGITALAUDIO OUT jacks (OPTICAL Oor COAXIAL X) tothe corresponding in jack on your amplifier. Use anoptional digital (optical Oor coaxial X) audio cable.22You will need to activate the VCR/DVD Recorder’sdigital output. (See “AUDIO” on page 21).Digital Multi-channel soundAdigital multi-channel connection provides the bestsound quality. For this you need a multi-channelAudio/Video receiver that supports one or more of theaudio formats supported by your VCR/DVD Recorder (MPEG 2, Dolby Digital and DTS). Check the receivermanual and the logos on the front of the receiver.Caution:Due to the DTS Licensing agreement, the digital outputwill be in DTS digital out when DTS audio stream isselected.otes–If the audio format of the digital output does not matchthe capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. –Six Channel Digital Surround Sound via digital con-nection can only be obtained if your receiver isequipped with a Digital Multi-channel decoder. –To see the audio format of the current DVD in the on-screen display, press AUDIO.oteThis VCR/DVD Recorder does not perform internal (2channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect thisVCR/DVD Recorder to a DTS compatible receiver viaone of this VCR/DVD Recorder’s digital audio outputs.Amplifier (Receiver)Rear of VCR/DVD RecorderA XORLAUDIO INPUT DIGITAL INPUTCOAXIALDIGITAL INPUTOPTICAL

DVR HOOKUP17Accessory Audio/Video (A/V) Connections to VCR/DVD RecorderConnect the AV 1 IN or AV 2 IN jacks on the VCR/DVDRecorder to the audio/video out jacks on your accesso-ry component, using optional audio/video cables.oteIf you use the S-VIDEO IN jack on the front panel, theVIDEO jack on the front panel is not available.Connecting a Digital CamcorderUsing the front panel DV IN jack, it is possible to con-nect a DV digital camcorder or video deck or DVD-R/RW recorder and digitally transfer DV tapes orDVD-R/RW discs to DVD-R/RW.Use a DV cable (not supplied) to connect the DV in/outjack of your DV Digital Camcorder to the front panel DVIN jack of this VCR/DVD Recorder.oteThis jack is for connection to DV equipment only. It isnot compatible with digital satellite tuners or D-VHSvideo decks.Connections (Continued)DV Digital CamcorderFront of VCR/DVD RecorderDVIN/OUT

18Initial SettingsIn this menu system, there are several ways to cus-tomize the settings provided. Most menus consist ofthree levels to set up the options, but some requiregreater depth for the variety of settings. If you pressSETUP, only the first and second level of the menu sys-tem will appear on the TV screen. The third level can bedisplayed by pressing B. For navigating the menu lev-els, you will see “B” on the right side of the menu labelto help you go to the next level. To bring up and exit the Menu:Press SETUP to bring up the menu. A second press ofSETUP will take you back to initial screen.To go to the next level: Press Bon the remote control. To go back to the previous level:Press bon the remote control. General Operation11Press SETUP.The Setup menu appears. 22Use v/ Vto select the desired option.33While the desired item is selected, press Btomove to the second level.44Use v/ Vto select the second desired option.55Press Bto move to the third level.66Use v/ Vto select the desired setting thenpress ENTER to confirm your selection.Some items require additional steps.77Press SETUP to exit the Setup menu.GENERALTuning Band Select11Press SETUP.The Setup menu appears. 22Use v/ Vto select the GENERAL option.33While the GENERAL option is selected, press Bto move to the second level.44Use v/ Vto select the Tuning Band option.55Press Bto move to the third level.66Use v/ Vto select the tuning band option (TVor CATV) then press ENTER.TV: If you are using a standard antenna to receive channels. CATV: If you are using basic cable to receive channels.Auto Channel SetThis VCR/DVD Recorder is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHFchannels 14-69 and CATV channels 1-125. Preparation:Connect the VCR/DVD Recorder to the desired type ofantenna or cable TV system, as shown in “ConnectingAntenna/Cable TV to VCR/DVD Recorder” on page 1411Press SETUP.The Setup menu appears. 22Use v/ Vto select the GENERAL option.33While the GENERAL option is selected, press Bto move to the second level.44Use v/ Vto select the Auto Channel Set option.55Press Bto move to the third level.Start icon is highlighted.66Press ENTER to begin the channel search.The tuner will automatically cycle through all available channels in the area and place them inthe tuner’s memory.oteAfter the Auto Channel Set proceeding is complete,make sure the Tuning Band is set appropriately (TV orCATV) on tuning band, follow steps 1~6 as shown pre-vious (Tuning Band Select) to choose the correct TuningBand (TV or CATV).Before Operation Tuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory SettingPrev. SelectTVCATVTuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory Setting11%StopPrev. Select

DVR HOOKUP19Before Operation (Continued)To Add or Erase Channels from MemoryThis feature allows you to add to or erase channelsfrom memory manually.11Follow steps 1-3 as shown above to the previ-ous page (Auto Channel Set).22Use v/ Vto select the CH. Add/Del option.33Press Bto move to the third level.Edit icon is highlighted.44Press ENTER.The Channel Edit menu appears.55Use v/ Vor number buttons to select a channelto add or delete then press ENTER.Add or Delete icon is highlighted.66Press ENTER to confirm your setting.77Repeat steps 5-6 to add or erase additionalchannels.Auto Clock SetThe VCR/DVD Recorder gives you two ways to set thetime and date: the Auto Clock Feature or manually. TheAuto Clock Feature enables the VCR/DVD Recorder toset up the clock when the VCR/DVD Recorder is turnedoff.The Clock Set feature is set to Auto at the factory. In the“Auto” setting, the VCR/DVD Recorder looks for a chan-nel carrying XDS (Extended Data Services) information.XDS updates the clock using the Coordinated UniversalTime. 11Press SETUP.The Setup menu appears. 22Use v/ Vto select the GENERAL menu.33While the GENERAL menu is selected, press Bto move to the second level.44Use v/ Vto select the Clock option.55Press Bto move to the third level.66Use v/ Vto select the Auto option then pressENTER.The Auto option is set at the factory. In the Auto option,the VCR/DVD Recorder looks for a channel carrying XDS(Extended Data Services) information. XDS updates theclock using the Coordinated Universal Time. 77Use v/ Vto choose your Time Zone.You can set your local Time Zone manually. WhenTimezone is set to Auto, the VCR/DVD Recorder will useXDS information to determine the proper setting.88Use Bto choose the Daylight Savings option.Use v/ Vto choose Auto, On, or Off.You can turn Daylight Savings On or Off manually. Whenit is set to Auto, the VCR/DVD Recorder will use XDSinformation to determine the proper setting.99Press ENTER to confirm your setting, thenpress SETUP to exit the Setup menu.oteIf your local TV station does not send date and time informa-tion, or sends incorrect information, you can set the clock man-ually.Manual Clock Set11Follow steps 1-5 as shown above to the left(Auto Clock Set).22Use v/ Vto select the Manual option thenpress ENTER.33Enter the necessary information for date andtime.b/ B(left/right): Moves the cursor to the previousor next column.v/ V(up/down): Changes the setting at the currentcursor position.44Press ENTER to confirm your setting, thenpress SETUP to exit the Setup menu.Tuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory Setting Time ZoneManualAutoAutoDaylightSavingsAutoPrev. SelectTuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory SettingAMManualAutoYearDateTimeSelect1220030011/:Ch. 2 DeleteAdd0-9 Input Return

20Before Operation (Continued)TV Aspect Ratio4:3 Letter Box: Select when a standard 4:3 TV is con-nected. Displays theatrical images with masking barsabove and below the picture.4:3 Pan Scan: Select when a standard 4:3 TV is con-nected. Displays pictures cropped to fill your TV screen.Both sides of the picture are cut off.16:9 Wide: Select when a 16:9 wide TV is connected.Progressive ScanProgressive Scan Video provides the highest quality pictures with less flickering.•If you are using the COMPONENT/PROGRESSIVESCAN VIDEO OUT jacks, but are connecting theVCR/DVD Recorder to a standard (analog) televi-sion, set Progressive Scan to OFF.•If you are using the COMPONENT/PROGRESSIVESCAN VIDEO OUT jacks for connection to a TV ormonitor that is compatible with a progressive scansignal, set Progressive Scan to ON.CautionOnce the setting for Progressive Scan output is entered,an image will only be visible on a Progressive Scancompatible TV or monitor. If you set Progressive Scanto ON in error, you must reset the VCR/DVD Recorder.First, remove the disc in the VCR/DVD Recorder. Next,press STOP (x) and hold it for five seconds beforereleasing it. The video output will be restored to thestandard setting, and a picture will once again be visibleon a conventional analog TV or monitor.Factory SettingIf you wish, you can reset the VCR/DVD Recorder to itsoriginal factory settings. Select “SET” then pressENTER.The Initialize menu will appear. Use the b B buttons toselect “Yes” and press ENTER.oteSome options cannot be reset. (Movie Rating, Password andCountry Code)LANGUAGEDisplay MenuSelect a language for the Setup menu and on-screendisplay. Disc LanguageSelect a language for the disc’s Menu, Audio, and Subtitle.Original : The original language set for the disc is selected.Other : To select another language, select Other option thenpress ENTER. Use the numbered buttons to key-in the corre-sponding 4-digit number according to the language code list onpage 53. If you enter the wrong number, press brepeatedly todelete one by one and correct it.Tuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory Setting ONOFFPrev. SelectTuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory Setting4:3 Letter Box4:3 Pan Scan16:9 WidePrev. SelectTuning BandAuto Channel SetCH. Add/DelClockTV Aspect RatioProgressive ScanFactory Setting SETPrev. SelectDisplay MenuDISC MenuDISC AudioDISC SubtitleEnglishPrev. SelectDisplay MenuDISC MenuDISC AudioDISC SubtitleEnglishFrenchSpanishItalianJapaneseChineseOther - - - -OriginalPrev. Select

21DVR HOOKUPBefore Operation (Continued)AUDIOEach DVD disc has a variety of audio output options.Set the VCR/DVD Recorder’sAudio Output according tothe type of audio system you use. Dolby DigitalPCM: Select when connected to a 2-channel digital stereoamplifier. The VCR/DVD Recorder’s digital audio outputssounds in the PCM 2ch format when you play a DVD videodisc recorded on the Dolby Digital recording system.Bitstream: Select when connected to aDolby Digitaldecoder (or an amplifier or other equipment with aDolby Digital decoder).DTSOFF: The DTS signal will not be output from the DIGI-TAL AUDIO OUT jack.Bitstream: Select when connected to a DTS decoder(or an amplifier or other equipment with a DTSdecoder).MPEGPCM: Select when connected to a 2-channel digitalstereo amplifier. The VCR/DVD Recorder’s digital audiooutputs sounds in the PCM 2ch format when you play aDVD video disc recorded on the MPEG1, or MPEG2recording system.Bitstream: Select when connected to an MPEG decoder(or an amplifier or other equipment with an MPEGdecoder).Sampling Freq. (Frequency)If your receiver or amplifier is NOT capable of handling96 kHz signals, select 48 kHz. When this choice ismade, this VCR/DVD Recorder will automatically con-vert any 96 kHz signals to 48 kHz so your system candecode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice ismade, this unit will pass each type of signal throughwithout any further processing. DRC (Dynamic Range Control) With the DVD format, you can hear a program’s sound-track in the most accurate and realistic presentationpossible, thanks to digital audio technology. However,you may wish to compress the dynamic range of theaudio output (the difference between the loudest soundsand the quietest ones). Then, you may listen to a movieat a lower volume without losing clarity of sound. SetDRC to ON for this effect.VocalSet Vocal to ON only when a multi-channel karaokeDVD is playing. The karaoke channels on the disc willmix into normal stereo sound.Dolby DigitalDTSMPEGSampling Freq.DRCVocalBitstreamOFFPrev. SelectDolby DigitalDTSMPEGSampling Freq.DRCVocal96KHz48KHzPrev. SelectDolby DigitalDTSMPEGSampling Freq.DRCVocalONOFFPrev. SelectDolby DigitalDTSMPEGSampling Freq.DRCVocal ONOFFPrev. SelectDolby DigitalDTSMPEGSampling Freq.DRCVocalBitstreamPCMPrev. SelectDolby DigitalDTSMPEGSampling Freq.DRCVocalBitstreamPCMPrev. Select

Before Operation (Continued)LOCK (Parental Control)Movie RatingMovies on DVDs may contain scenes not suitable forchildren. Therefore, discs may contain Parental Controlinformation that applies to the complete disc or to certain scenes on the disc. These scenes are ratedfrom Level 1 to 8, and alternatively, more suitablescenes are available for selection on some discs.Ratings are country-dependent. The Parental Controlfeature allows you to prevent discs from being playedby your children or to have certain discs played withalternative scenes.11Press SETUP.The Setup menu appears. 22Use v/ Vto select the LOCK option.33While the LOCK option is selected, press Btomove to the second level.44Use v/ Vto select the Movie Rating option.55Press Bto move to the third level.66When you have not entered a password yet. Enter a 4-digit password using the numbered but-tons to create a personal 4-digit security password.Enter the 4-digit password again to confirm.When you have already entered a password; Enter a 4-digit password using the numbered but-tons to confirm the personal 4-digit security pass-word. ipIf you enter the wrong number, press brepeatedly todelete password numbers one by one then correct it.77Select a rating from 1 to 8 using the v/ Vbut-tons. One (1) has the least playback restrictions.Eight (8) has the most playback restrictions.Unlock: If you select Unlock, Parental Control isnot active. The disc will play in full.Level 1 to 8: Some discs contain scenes not suit-able for children. If you set a rating for the recorder,all disc scenes with the same rating or lower will beplayed. Higher rated scenes will not be playedunless an alternative scene is available on the disc.The alternative must have the same rating or alower one. If no suitable alternative is found, play-back will stop. You must enter the 4-digit passwordor change the rating level in order to play the disc.88Press ENTER to confirm your rating selection,then press SETUP to exit the menu.Set PasswordChanging the 4-digit code11Follow steps 1-3 as shown above to the left(Movie Rating).22Use v/ Vto select the Password option.33Press Bto move to the third level.44Follow step 6 as shown above to the left (MovieRating).55While “Change” is selected, press ENTER.If you select “Delete” then press ENTER. The pass-word is deleted.66Enter a 4-digit password using the numberedbuttons to create a personal 4-digit securitypassword.77Enter the 4-digit password again.ipIf you enter the wrong number, press brepeatedly todelete password numbers one by one then correct it.If you forget your 4-digit codeIf you forget your password, to clear the current pass-word, follow the procedure below.1Press SETUP to display the Setup menu.2Use the Number buttons to enter the 5-digit number“21019”. The message appears on the TV screen.3Select “Yes” then press ENTER. The 4-digit pass-word is cleared. Enter a new code as shown above.22Level 8(Adult)Level 7Level 6Level 5Level 4Level 3Level 2Level 1(Kid Safe)UnlockMovie RatingPasswordCountry CodePrev. SelectChangeDeleteMovie RatingPasswordCountry CodeNew Password0-9 InputPrev. Select

Before Operation (Continued)Country CodeEnter the code of a country/area whose standards wereused to rate the DVD video disc, referring to the list(See “Country Code List”, page 54.).11Press SETUP.The Setup menu appears. 22Use v/ Vto select the LOCK option.33While the LOCK option is selected, press Btomove to the second level.44Use v/ Vto select the Country Code option.55Press Bto move to the third level.66When you have not entered a password yet. Enter a 4-digit password using the numbered but-tons to create a personal 4-digit security password.Enter the 4-digit password again.When you have already entered a password; Enter a 4-digit password using the numbered but-tons to confirm the personal 4-digit security pass-word. ipIf you enter the wrong number, press brepeatedly todelete password numbers one by one then correct it.77Select the first character using the v/ Vbuttons.88Shift the cursor using Bbuttons and select thesecond character using v/ Vbuttons.99Press ENTER to confirm your country codeselection, then press SETUP to exit the menu.RECORDDISC Record ModeYou can set the picture quality for DVD recording; SP(Standard quality), LP (Low quality), XP (High quality).11Press SETUP.The Setup menu appears. 22Use v/ Vto select the RECORD option.33While the RECORD option is selected, press Bto move to the second level.44Use v/ Vto select the DISC Record Mode Setoption.55Press Bto move to the third level.66Use b /B to select the VR Mode or Video Mode.77Use v/ Vto select a desired DISC Record Mode(SP, LP, or XP)88Press ENTER to confirm your selection, thenpress SETUP to exit the menu.VCR Record ModeYou can set the picture quality for VCR recording; SP(Standard Play), SLP (Super Long Play).DVR HOOKUP23Movie RatingPasswordCountry CodeUSPrev. SelectVideo ModeVR ModeSPSPDISC Record ModeVCR Record ModeDV Record AudioAuto ChapterSLPSPDISC Record ModeVCR Record ModeDV Record AudioAuto ChapterPrev. Select

DV Record AudioYou need to set this if you have a camcorder using32kHz/12-bit sound connected to the front panel DV INjack.Some digital camcorders have two stereo tracks foraudio. One is recorded at the time of shooting; the otheris for overdubbing after shooting.On the Audio 1 setting, the sound that was recordedwhile shooting is used. On the Audio 2 setting, the overdubbed sound is used.Auto ChapterDuring recording (Video mode only), chapter markersare added automatically at fixed intervals. You can setthis interval to 3 minutes, 5 minutes or 10 minutes. Toturn off automatic chapter marking, select “Not Use”.DISCDISC Initialize•If you load a blank DVD-R disc, it will always be ini-tialized in Video mode, which allows the disc to beplayed in most standard DVD players.•If you load a blank DVD-RW disc, you will be prompt-ed to initialize the disc in Video mode (for maximumcompatibility) or VR mode (to enable advanced edit-ing features).•If you load a DVD-RW that has already been used,you can change between Video mode and VR modeby erasing the disc using the DISC Initialize feature.11Press SETUP.The Setup menu appears. 22Use v/ Vto select the DISC option.33While the DISC option is selected, press Btomove to the second level.44Use v/ Vto select the DISC Initialize option.55Press Bto move to the third level.Start icon is highlighted.66Press ENTER.Disc Initialize menu appears.77Use b/ Bto select a desired DISC InitializeMode (VR Mode or Video Mode) then pressENTER.88Use b/ Bto select OK, and press ENTER.It takes a few moments to initialize the disc.99Press ENTER.CautionIf you want to change the disc format, everythingrecorded on the disc will be erased.24Before Operation (Continued)Audio 2Audio 1DISC Record ModeVCR Record ModeDV Record AudioAuto ChapterPrev. Select5 Min10 MinNot Use3 MinDISC Record ModeVCR Record ModeDV Record AudioAuto ChapterPrev. SelectStartDISC InitializeDISC FinalizeDISC NameDISC ProtectPBCPrev. SelectVideo ModeSelect mode.Disc InitializeVR Mode

Before Operation (Continued)DISC FinalizeFinalizing ‘fixes’ the recordings in place so that the disccan be played on a regular DVD player or computerequipped with a suitable DVD-ROM drive.Finalizing a Video mode disc creates a menu screen fornavigating the disc. This is accessed by pressing DISCMENU or TITLE.CautionOnce you have finalized a DVD-R disc, you cannotedit or record anything else on that disc.However, you can record and edit a DVD-RW discby choosing Unfinalize.11Follow steps 1-3 as shown on page 24 (DISCInitialize).22Use v/ Vto select the DISC Finalize option.33Press Bto move to the third level.Finalize is highlighted.44Press ENTER.Finalize menu appears.55Use b/ Bto select OK then press ENTER.The VCR/DVD Recorder starts finalizing the disc.oteFinalization can take up to 3-4 minutes depending onthe type of disc, how much is recorded on the disc, andthe number of titles on the disc.ipsIf you load a DVD-RW that has already been finalizedon a different DVD Recorder, you can ‘Unfinalize’ it bychoosing Unfinalize from the Finalize menu. Afterdoing this, you can edit and re-record onto the disc.You cannot unfinalize a DVD-R disc.DISC ProtectWhen recording in VR mode, set to ON to prevent acci-dental recording, editing or erasing of the disc loaded. Ifyou need to unlock the disc to make edits, select OFF.PBCPBC stands for Playback Control and refers to specialmenus and navigation features that are available onsome Video CDs.- ON: Video CDs are played according to the PBC, ifavailable.- OFF: Video CDs are played the same way as AudioCDs.DVR HOOKUP25DISC InitializeDISC FinalizeDISC NameDISC ProtectPBCUnfinalizeFinalizePrev. SelectOKDo you want to finalize the disc?FinalizeCancelDISC InitializeDISC FinalizeDISC NameDISC ProtectPBC ONOFFPrev. SelectDISC InitializeDISC FinalizeDISC NameDISC ProtectPBCONOFFPrev. Select

Before Operation (Continued)DISC NameUse the DISC Name feature to enter a name for thedisc. This name appears when you load the disc andwhen you display disc information on-screen.•The disc name can be up to 32 characters long.•For discs formatted on a different DVD Recorder, youwill see only a limited character set.11Follow steps 1-3 as shown DISC Initialize onpage 24.22Use v/ Vto select the DISC Name option.33Press Bto move to the third level.Edit icon is highlighted.44Press ENTER.Keyboard menu appears.55Enter a name for the disc. Use vVbBto selecta character then press ENTER to confirm yourselection.•English/Latin Capital: Selects a keyboard withuppercase characters.•English/Latin Lowercase: Selects a keyboardwith lowercase characters .•Symbols: Selects a keyboard with all symbols.•OK: Confirms the name you have entered.•Cancel: Deletes all characters and exits theKeyboard menu.•Space: Inserts a space at the cursor position.•Delete: Deletes the character to the left of thecursor.•b/ B:Moves the cursor left or right.You can also use the remote control to enter DISC Names:SKIP (./ >): Moves the cursor left or right.PLAY (N): Inserts a space at the cursor position.PAUSE/STEP (X): Deletes the character to the rightof the cursor position.STOP (x), CLEAR: Deletes the character to the leftof the cursor position.0-9: Enters the character corresponding to theselected column. DISC MENU/LIST, DISPLAY: Switches the keyboardtype (English/Latin Capital, English/LatinLowercase, Symbols).66Choose OK then press ENTER to set the nameand return to the DISC menu.77Press SETUP to exit the menu.26DISC InitializeDISC FinalizeDISC NameDISC ProtectPBCEditPrev. Select0123456789ABCDEFGH I JKLMNOPQRSTUVWXYZDVD-VREnglish/Latin CapitalLanguageOK CancelSpace Delete

DVR HOOKUP27Before Operation (Continued)General Explanation of On-Screen DisplayThis manual gives basic instructions for operating theVCR/DVD Recorder. Some DVDs require specific oper-ation or allow only limited operation during playback.When this occurs, the symbol appears on the TVscreen, indicating that the operation is not permitted bythe VCR/DVD Recorder or is not available on the disc.Displaying Information on-screenYou can display various information about the disc ortape loaded on-screen.On-screen display operation11Press DISPLAY repeatedly to display/change theinformation displayed on-screen.22To remove the on-screen display, press DIS-PLAY or RETURN (O) repeatedly until it disap-pears.See the descriptions on pages 28 and 29 fordetailed explanations of on-screen displays for eachmedia type.otesSome discs may not provide all the features shown inthe on-screen display examples.The on-screen display disappears automatically if nobutton is pressed for seven seconds.Temporary Feedback IconsResume play from this pointAction prohibited or not availableDisplaying OSD While Watching TVWhile watching TV, press DISPLAY to display/remove the on-screen display.For example, when a DVD-RW in VR mode is inserted,you would see a screen similar to the following:Changing TV ChannelsIf no disc is playing, you can change TV channels usingthe number or CH/TRK (v/V) buttons on the remotecontrol, or the CH (v/V) buttons on the front panel.oteAntenna channels are numbered 2 through 69. Cablechannels are numbered 1 through 125.Changing TV Audio ChannelSome TV programs are broadcast with both a main anda Secondary Audio Program (SAP). You can change theTV audio using the AUDIO button.Press AUDIO repeatedly to change the TV audio,according to Broadcast audio signal as shownbelow. •STEREO+SAP Audio Signal Stereo →SAP →Mono →Stereo•STEREO Audio Signal Stereo →L→R →Mono Stereo•SAP Audio Signal Mono →SAP →Mono•MONO Audio Signal MonoThe current audio channel is displayed on-screen.•If SAP is selected, but there is no SAP channel beingbroadcast, you will still hear the main audio (Mono orSTEREO) channel.•If the sound is poor quality when set to Stereo, youcan often improve it by changing to Mono.•When an external input is selected, the audio channelcan be switched only to Stereo.DVD-VRVR Mode SP 01H 32M Free10/8/2003Mono 11:35 AMMONODVDCh. 6Indicates disc type. Indicates channelnumber andaudio inputsignal receivedby the tuner.Indicates the Recording mode, free space, and elapsed timeprogress bar.Indicates current date and time.Indicates output audio signal.

28Before Operation (Continued)Menu OptionsTitle NumberChapter NumberTime searchAudio language and Digital Audio Output modeSubtitle languageAngleSoundFunction (Use v/ Vto select desired option)Shows the current title number and total number oftitles, and skips to the desired title number.Shows the current chapter number and total number ofchapters, and skips to the desired chapter number.Shows the elapsed playing time, andsearches the point by the elapsed time directly.Shows the current audio soundtrack language,encoding method, and channel number, andchanges the setting.Shows the current subtitles language, andchanges the setting.Shows the current angle number and total number ofangles, and changes the angle number.Shows the current sound mode, andchanges the setting.Selection Methodb/ B,orNumbers, ENTERb/ B,orNumbers, ENTERNumbers, ENTERb/ Bb/ Bb/ Bb/ B1/64/26- : -- : --ABCOFFNORMAL1/35.1CH1. ENGDVDTitle: 1/4Chapter: 3/28 0:06:32 / 2:12:10DVDShows the currenttitle/chapter number andtotal number oftitles/chaptersShows the CurrentmodeShows the elapsed playing timeand total time.Menu OptionsTitle NumberChapter NumberTime searchSoundFunction (Use v/ Vto select desired option)Shows the current title number and total number oftitles, and skips to the desired title number.Shows the current chapter number and total number ofchapters, and skips to the desired chapter number.Shows the elapsed playing time, andsearches the point by the elapsed time directly.Shows the current sound mode, andchanges the setting.Selection Methodb/ B,orNumbers, ENTERb/ B,orNumbers, ENTERNumbers, ENTERb/ B1/61/1- : -- : --NORMALVRLPORGTitle 101/02/03 0:06:32 / 2:12:10DVDShows the title name,recording date,recording mode, etc.ORG: Original PLS: Playlist Shows the CurrentmodeShows the elapsed playing timeand total time.OSD Menu Options by Media Type

DVR HOOKUP29Menu OptionsTrack NumberTimeAudio ChannelSoundFunction (Use v/ Vto select desired option)Shows the current track number and total number of tracksor PBC On mode, and skip to the desired track number.Shows the elapsed playing time (Display only).Shows the current audio channel, andchanges the audio channel.Shows the current sound mode, andchanges the setting.Selection Methodb/ B,orNumbers, ENTER–b/ Bb/ BVCD1/40:10:30NORMALSTEREOTrack : 1/10:06:32 / 2:12:10DVDShows the current tracknumber and total number oftracks, or shows PBC Onmode.Shows the currentmodeShows the elapsed playing timeand total time.Before Operation (Continued)Video0:06:32 / 2:12:10DVDLPORGTitle 101/02/03Shows the title name,recording date,recording mode, etc.ORG: Original PLS: Playlist Shows the Currentmode.Shows the elapsed playing timeand total time.Menu OptionsTitle NumberChapter NumberTime searchSoundFunction (Use v/ Vto select desired option)Shows the current title number and total number oftitles, and skips to the desired title number.Shows the current chapter number and total number ofchapters, and skips to the desired chapter number.Shows the elapsed playing time, andsearches the point by the elapsed time directly.Shows the current sound mode, andchanges the setting.Selection Methodb/ B,orNumbers, ENTERb/ B,orNumbers, ENTERNumbers, ENTERb/ B1/61/1- : -- : --NORMALOSD Menu Options by Media Type (Continued)Menu OptionsTime Audio ChannelFunction (Use v/ Vto select desired option)Shows the elapsed playing time (Display only).Shows the audio channel, andchanges the audio channel.Selection Method–b/ B0:00:20HIFIVCRSPShows playing speed,recording tape informationand the elapsed playingprogress bar.Shows the CurrentmodeVHS

30Operation with DVD and Video CDPlaying a DVD or Video CDPlayback SetupBefore using the remote control, press the DVD but-ton to select the device to be operated.Turn the TV on and select the video input source con-nected to the VCR/DVD Recorder. Audio system: Turn the audio system on and selectthe input source connected to the VCR/DVDRecorder.11Press OPEN/CLOSE to open the disc tray.22Load your chosen disc in the tray, with the playback side down. 33Press OPEN/CLOSE to close the tray.READING appears on the display window, andplayback starts automatically. If playback does notstart, press PLAY.In some cases, the disc menu might appearinstead. ipIf a menu screen is displayedThe menu screen may be displayed first after loading aDVD or Video CD which contains a menu.Use the bBvVbuttons to select the title/chapter youwant to view, then press ENTER to start playback.Press TITLE or DISC MENU to return to the menuscreen.Use the number buttons to select the track you wantto view.Press RETURN to return to the menu screen.Menu settings and the exact operating procedures forusing the menu may differ depending on the disc.Follow the instructions on each menu screen.You may also set PBC to OFF under the DISCSettings menu. See page 25.otesIf Parental Control is set and the disc is not within theMovie Rating settings (not authorized), the 4-digitcode must be entered and/or the disc must be author-ized (see “Movie Rating”, on page 22).DVDs may have a Region Code.Your VCR/DVD Recorder will not play discs that havea region code different from your VCR/DVD Recorder.The region code for this VCR/DVD Recorder is 1(one).oteUnless stated otherwise, all operations described usethe remote control. Some features may also be avail-able on the Setup menu. Moving to another TITLEs When a disc has more than one title, you can move toanother title as follows:Press DISPLAY twice and use v/ Vto select the titleicon. Then, press the appropriate numbered button(0-9) or b/ Bto select a title number and pressENTER to confirm.Moving to another CHAPTER/TRACKsWhen a title on a disc has more than one chapter/track,you can move to another chapter/track as follows:Press SKIP (.or >) briefly during playback toselect the next chapter/track or to return to the begin-ning of the current chapter/track.Press SKIP (.) twice briefly to step back to theprevious chapter/track.To go directly to any chapter/track during playback,press DISPLAY twice. Then, use v/ Vto select chap-ter icon (or for a Video CD, select the track icon).Then, enter the chapter/track number using the num-bered buttons (0-9) or press b/ Band press ENTER. oteOn a Video CD with PBC, you must set PBC to OFF inthe DISC menu to use this function. See page 25.Slow Motion 1Press BACKWARD (m) or FORWARD (M) during pause mode.The VCR/DVD Recorder will enter SLOW mode. 2Use the BACKWARD (m) or FORWARD (M) toselect the required speed: t 1/16, t 1/8, t 1/4,t 1/2, or T1/16, T1/8, T1/4, T1/2.With a Video CD, the Slow speed changes to : T1/8, T1/4 or T1/2 (forward).3To exit Slow Motion mode, press PLAY.oteSlow motion playback in reverse is not possible withVideo CDs.VCDVRVideoDVD1/44/26VCDVRVideoDVD1/6VRVideoDVDVCDDVD

PLAYBACK31Operation with DVD and Video CD (Continued)Playing a DVD or Video CD (continued)Still Picture and Frame-by-Frame Playback1Press PAUSE/STEP (X) during playback.The recorder will now go into PAUSE mode. 2You can advance or back up the picture frame-by-frame by pressing b/B repeatedly during PAUSEmode.oteFrame-by-frame reverse playback is not available onVideo CDs.Search 1Press BACKWARD (m) or FORWARD (M) duringplayback.The recorder will now go into SEARCH mode. 2Press BACKWARD or FORWARD to select therequired speed: mX2, mX4, mX8, mX16,mX100, n(backward) or MX2, MX4, MX8,MX16, MX100, N (forward).With a Video CD, the Search speed changes to:mX2, mX4, mX8 (backward) or MX2, MX4,MX8 (forward).3To exit SEARCH mode, press PLAY (N).oteWhen you press BACKWARD or FORWARD duringSearch mode to go to normal speed, search mode iscanceled.Random 1Press RANDOM during playback or in Stop mode.The unit automatically begins Random Playback and“RANDOM” appears on the TV screen.2To return to normal playback, press RANDOM until“NORMAL” appears on the TV screen.ipBy pressing SKIP (>) during Random playback, theVCR/DVD Recorder selects another title (track) andresumes Random playback.oteThis function only works with DVD Karaoke discs orvideo CDs without PBC.On a Video CD with PBC, you must set PBC to OFFin the DISC menu to use the Random function. Seepage 25.Repeat DVD Video Discs - Repeat Chapter/Title/Off1To repeat the currently playing chapter, pressREPEAT.The REPEAT CHAPTER appears on the TV screen.2To repeat the title currently playing, press REPEAT asecond time.The REPEAT TITLE appears on the TV screen.3To exit Repeat mode, press REPEAT a third time.The REPEAT OFF icon appears on the TV screen.Video CDs - Repeat Track/All/Off1To repeat the track currently playing, press REPEAT.The REPEAT TRACK icon appears on the TV screen.2To repeat the disc currently playing, press REPEAT asecond time.The REPEAT ALL icon appears on the TV screen.3To exit Repeat mode, press REPEAT a third time.The REPEAT OFF icon appears on the TV screen.oteOn a Video CD with PBC, you must set PBC to OFF in theDISC menu to use the Repeat function. See page 25.Repeat A-B To repeat a sequence in a title:1Press A-B at your chosen starting point.REPEAT A- appears on the TV screen.2Press A-B again at your chosen end point.REPEAT A-B appears briefly on the TV screen, and the repeatsequence begins.3To cancel the sequence, press A-B repeatedly toselect REPEAT OFF.REPEATA - BVCDVRVideoDVDREPEATCHAPTERVCDVRVideoDVDVCDKaraoke DVDVCDVRVideoDVDVCDVRVideoDVD

Operation with DVD and Video CD (Continued)Playing a DVD or Video CD (Continued)Time Search The Time Search function allows you to start playing atany chosen time on the disc.1Press DISPLAY twice during playback. The on-screendisplay appears on the TV screen.The Time Search box shows the elapsed playing time of thecurrent disc.2Within 7 seconds, use v/ Vto select the TimeSearch icon in the on-screen display.The “-:--:--” appears in the Time Search box.3Within 7 seconds, use the number buttons to enterthe required start time. Enter hours, minutes, and sec-onds from left to right in the box.You can not enter an invalid time.If you enter the wrong numbers, press b/Bto move theunder bar (_) to the wrong number. Then reenter the correctnumbers.4Within 7 seconds, press ENTER to confirm the starttime.Playback starts from the selected time on the disc. Zoom The Zoom function allows you to enlarge the videoimage and to move through the enlarged image.1Press ZOOM during playback or still playback to acti-vate the Zoom function.The square frame will be displayed in the right bottom of thepicture. If no button is pressed for more than 5 seconds, thesquare frame will disappear.Each press of the ZOOM button changes the TV screen inthe sequence shown below.X1(normal size) →X2 size →X4 size →X1(normal size)2Use the bBvVbuttons to move through thezoomed picture.3To resume normal playback, press CLEAR or pressZOOM repeatedly until the normal picture appears.oteThe zoom function may not work for some DVDs.Marker Search You can start playback from a memorized point. Up tosix points can be memorized.To enter a mark, follow these steps.1During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly.2Repeat step 1 to enter up to six Marker points on adisc.To Recall a Marked Scene1During disc playback, press SEARCH. The Marker Search menu will appear on the TV screen.2Use the bBvVbuttons to select a Marked scenethat you want to recall.3Press ENTER.Playback will start from the Marked scene.4To remove the Marker Search menu,press RETURN (O)To clear a Marked Scene1During disc playback, press SEARCH. The Marker Search menu will appear on the TV screen.2Use bBvVto select the Marked scene that youwant to erase.3Press CLEAR.“Delete selected marker. Continue?” message appears.4Use b/ Bto select “Yes” then press ENTER.5Repeat steps 2-4 to erase additional Marked scene.6To remove the Marker Search menu, press RETURN (O).Disc Menus Many DVDs contain Disc menus that allow you toaccess special features. To open a Disc menu, pressDISC MENU. Then use the 0-9 buttons to directly selectthe desired option, or use the bBvVbuttons to high-light your selection and press ENTER.1Press DISC MENU.The Disc menu is displayed.2To exit the Disc menu, press STOP (x).Title Menus 1Press TITLE.If the current title has a menu, the Title menu will appear onthe TV screen. Otherwise, the Disc menu may appear.2The Title menu may contain camera angles, spokenlanguages and subtitle options, as well as the chap-ters for the title.DVDDVDMARKER1 / 6VCDVRVideoDVDVCDVRVideoDVD- : -- : --VRVideoDVDDeleteCLEARCloseSelectMarker SearchMarker SearchMove32

PLAYBACK33Operation with DVD and Video CD (Continued)Playing a DVD or Video CD (Continued)Camera Angle If the disc contains scenes recorded at different cameraangles, you can change to a different camera angleduring playback.Press ANGLE then press b/ Brepeatedly duringplayback to select a desired angle.The number of the current angle appears on the TV screen.ipThe Camera Angle icon is displayed on the TV screen whenalternate angles are available.Changing the Audio Language Press AUDIO then press b/ Brepeatedly during play-back to hear a different audio language or audio track.Changing the Audio ChannelWith a Video CD, press AUDIO then press b/ Brepeatedly during playback to hear a different audiochannel (STEREO, LEFT or RIGHT).3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five ormore speakers normally required to listen to multi-channel audio from a home theater system. 1Press DISPLAY twice then use v/ Vto select thesound icon. Then, use b/ Bto select “3D SUR.”.2To turn off the 3D Surround effect, select “NORMAL”.Subtitles Press SUBTITLE then press b/ Brepeatedly duringplayback to see the different subtitle languages.Finding Locations on a Disc You can directly access any point on a video CD usingthis function within 95%. Use this function only while avideo CD is playing. Playback jumps to the point speci-fied.1Press SEARCH during playback.The progress bar appears on the TV screen.2Use b/ Bto find the desired starting position forplayback.3Press ENTER to confirm the selected position.Playback starts from the selected position.oteThis function will not work if any bookmarks have beenset; see page 32.Last Condition Memory This VCR/DVD Recorder memorizes the user settingsfor the last disc that you have viewed. Settings remainin memory even if you remove the disc from theVCR/DVD Recorder or switch off the VCR/DVDRecorder. If you load a disc that had its settings memo-rized, the latest stop position is automatically recalled.otesSettings are stored in memory for use any time.This VCR/DVD Recorder does not memorize settingsof a disc if you switch off the VCR/DVD Recorderbefore commencing to play it.The Last Condition Memory function may not workon some DVDs.DVDVCDABCOFFDVDNORMALVCDVRVideoDVDSTEREOVCD5.1CH1. ENGDVD1/3DVD33%PBC33%TRK 1

34Audio CD and MP3 OperationPlaying an Audio CD or MP3 DiscThe VCR/DVD Recorder can play audio CDs and MP3files on CD-ROM, CD-R or CD-RW discs. Before play-ing MP3 files, read “Notes on MP3 Recordings” at right.11Insert a disc and close the tray.AUDIO CD or MP3 CD menu appears on the TVscreen.AUDIO CD Menu MP3 CD Menu22Use v/Vto select a track then press PLAY (NN). Playback starts. During playback, the current track’s elapsed playingtime will appear on the display window and menu.Playback will stop at the end of the disc.ipsOn the MP3 CD menu, you can display the folders onthe disc. Use vVbBto select the “Folder” icon on theMP3 CD menu then press ENTER twice. Also, you can display only tracks in the folders. Use vVbBto select a folder then press ENTER.If audio tracks and MP3 files are mixed on the disc, youcan switch between the AUDIO CD menu and MP3 CDmenu by pressing TITLE repeatedly in Stop mode.If you select a track and press DISPLAY, the file infor-mations are displayed. If you select a folder and press DISPLAY, the number ofsubfolders and number of MP3 files in the folder aredisplayed. If you are in a file list and want to return to the Folderlist, use the v/Vto highlight and press ENTER toreturn to the previous menu screen.You can view TV channel or video input source bypressing RETURN. If you want to return to the MP3 orAUDIO CD menu, press DISC MENU/LIST.33To stop playback at any time, press STOP (xx).Notes on MP3 RecordingsAbout MP3An MP3 file is audio data compressed by using theMPEG1 audio layer-3 file-coding scheme. We callfiles that have the “.mp3” file extension “MP3 files”.The VCR/DVD Recorder can not read an MP3 filethat has a file extension other than “.mp3”.MP3 Disc compatibility with this recorder islimited as follows:1. CD-R/RW physical format should be “ISO 9660” and“JOLIET”.2. If you record MP3 files using the software whichcannot create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3 files. Werecommend that you use “Easy-CD Creator”, whichcreates an ISO9660 or JOLIET file system.3. The total number of files and folders on the disc arefree but the total number of files and folders on thefolder should be less than 1999.This VCR/DVD Recorder requires discs/recordings tomeet certain technical standards in order to achieveoptimal playback quality. Pre-recorded DVDs are auto-matically set to these standards. There are many differ-ent types of recordable disc formats (including CD-Rcontaining MP3 files) that require certain pre-existingconditions (see above) to insure compatible playback.Customers should also note that permission isrequired in order to download MP3 files and musicfrom the Internet. Our company has no right togrant such permission. Permission should alwaysbe sought from the copyright owner.MP3CDAudio CD52:16Title DurationTrack 1 04:47Track 2 04:0103:0103:3004:2405:0103:4804:0905:1004:11Track 3Track 4Track 5Track 6Track 7Track 8Track 9Track 10ProgramCloseMarkMARKERSelect LISTMP3 CD00:00ROOT 152 ItemsFOLDER 01FILE 2.mp3FILE 3.mp3FILE 4.mp3FILE 5.mp3FILE 6.mp3FILE 7.mp3FILE 8.mp3FILE 9.mp3FILE 10.mp3ProgramCloseMarkMARKERSelect LIST

PLAYBACK35Audio CD and MP3 Operation (Continued)Pause 1Press PAUSE/STEP during playback.2To return to playback, press PAUSE/STEP again.Moving to Another Track Press SKIP .or >briefly during playback to go to the next track or to return to thebeginning of the current track.Press SKIP .twice briefly to step back to the pre-vious track.On an Audio CD, to go directly to any track, enter thetrack number using the numbered buttons (0-9) dur-ing playback.Repeat Press REPEAT to select a desired repeat mode.•Audio CD- TRACK: Repeats the current track.- ALL: Repeats all the tracks on a disc.- OFF: Does not play repeatedly (no display).•MP3 Disc- TRACK: Repeats the current track.- FOLDER: Repeats all the tracks on a folder of a disc.- OFF: Does not play repeatedly (no display).Random 1Press RANDOM during playback or when playbackhas stopped.The VCR/DVD Recorder automatically beginsRandom Playback and RANDOM appears on the leftside of menu screen.2To return to normal playback, press RANDOM again,then RANDOM disappears from the menu screen.Search 1Press BACKWARD (m) or FORWARD (M) duringplayback.The recorder will now go into SEARCH mode. 2Press BACKWARD or FORWARD to select therequired speed: mX2, mX4, mX8 (backward) orMX2, MX4, MX8 (forward).Search speed and direction are indicated on the menuscreen.3To exit SEARCH mode, press PLAY (N).Repeat A-B To repeat a sequence in a title:1Press A-B at your chosen start point.Repeat icon and “A-” appears on the menu screen.2Press A-B again at your chosen end point.The Repeat icon and “A - B” appears on the left side ofmenu screen, and the repeat sequence begins.3To exit the sequence and return to normal play, pressA-B again.The Repeat icon disappears from the menu screen.CDCDMP3CDMP3CDMP3CDMP3CD

36Programmed Playback with Audio CD and MP3The Program function enables you to store your favoritetracks from any disc in the recorder memory.Program can contain 99 tracks (Audio CD) or 256tracks (MP3).11Insert an Audio CD or MP3 disc.Audio CD or MP3 CD menu will appear.22Use vVto select a track or fold on the List thenpress ENTER.The options appears on the left side of the menu.otesPress and hold V for fast to move to the nexttrack or folder.Press and hold vfor fast to move to the previ-ous track or folder.33Use vVto highlight the “Program Add”iconthen press ENTER.The selected track is added to the Program List.44Repeat steps 2-3 to place additional tracks onthe Program list.ipYou can add multi tracks on the List to the Program List. 1. Select a track then press MARKER.2. Repeat step 1 to mark additional tracks.3. Select any track then press ENTER.The options appears on the left side of the menu.4. Use v/ Vto highlight the “Program Add” icon thenpress ENTER.The all marked tracks are added to the Program List.otesUse the CLEAR button to select all tracks, or cancelall marked tracks.If you select folder for Programmed Playback, alltracks in the folder are added to the program list. 55Use Bto move the tracks to the Program list.The programmed track you selected last is highlighted onthe program list.66Use v/ Vto select the track you want to startplaying.77Press PLAY (N)to start.Playback begins in the order in which you programmedthe tracks and “PRG” indicator appears on the displaywindow.Playback stops after playing the last programmed track onthe program list.88To resume normal playback from pro-grammed playback, select a track on theList then press PLAY (NN).“PRG” indicator disappears from the display window.Repeat Programmed Tracks Press REPEAT to select a desired Repeat mode.• TRACK : Repeats the current track.• ALL : Repeats all the tracks on a disc.• OFF : Does not play repeatedly (no display).Erasing a Track from the Program List1Select the track that you wish to erase from theProgram List then press ENTER.The options appears on the left side of the menu.2Select the Delete icon then press ENTER.The selected track is deleted on the Program List.3Repeat steps 1-2 to delete additional tracks on theProgram List.Erasing the multi tracks on theProgram List1. Select a track on the Program List then press MARKER.2. Repeat step 1 to mark additional tracks.3. Select any track then press ENTER.The options appears on the left side of the menu.4. Use v/ Vto highlight the “Delete” icon then pressENTER.The all marked tracks are deleted from the ProgramList.Changing the order of Program List1Select the track you wish to move on the ProgramList then press ENTER.The options appear on the left side of the menu.2Select Move then press ENTER.Ayellow bar appears in the Program List.3Use v/Vto move the yellow bar to the desired loca-tion, then press ENTER.The selected track is moved.4If you wish to move other tracks repeat stages 1 - 3.ipUse MARKER to move multiple tracks.05/12Track 5Track 1Track 2Track 3Track 4Track 5Track 6Track 7Track 8Track 9Track 10Track 5Track 2Track 8Track 4Audio CD00:42Title Program ListProgramCloseMarkMARKERSelect LISTMP3 CD9/15202:13FILE 9.mp3ROOT Program ListFILE 1.mp3FILE 2.mp3FILE 3.mp3FILE 4.mp3FILE 5.mp3FILE 6.mp3FILE 6.mp3FILE 7.mp3FILE 8.mp3FILE 9.mp3FILE 2.mp3FILE 4.mp3FILE 9.mp3FILE 10.mp3ProgramCloseMarkMARKERSelect LIST

PLAYBACK37Viewing a Photo DiscThis VCR/DVD Recorder can play discs with JPEGfiles. Before playing JPEG files, read the notes onJPEG files on right.1Insert a disc and close the tray.The Photo menu appears on the TV screen.22Use vVbB to select a folder, and ENTER.Open icon is highlighted on the left side of themenu.33Press ENTER.Alist of files in the folder appears.oteIf the icon displays in a JPEG file list, it means youcannot see those JPEG files.44Use vVbB to select a file, then press ENTER.The options appear on the left side of the menu.ipIf you are in a file list and want to return to the Folderlist, use the v/ Vbuttons on the remote to highlight theicon and press ENTER.55Use v/ Vto select the Full Screen option thenpress ENTER.66To stop viewing at any other time, press STOPor RETURN (O).The Photo menu appears.Selecting other FilesWhile viewing a picture, press SKIP (./>) or bBonce to advance to the next file or return to the previousfile.To rotate the pictureUse v/ Vwhile showing a picture to flip the picture clockwise or counterclockwise.To view Slide Show1. Select Slide Show option on the menu.2. Press ENTER.Slide Show menu appears.3. Use vVbB to set the options.Object: All files or Selected file. Speed: Selects Slide Show speed (Slow, Normal,Fast).4. Select START icon then press ENTER to start slideshow.5. Press STOP to stop the Slide Show and return to thePhoto menu.oteUse the MARKER button to select multiple files.Notes on JPEG FilesDepending on the size and number of the JPEG files,it could take a long time for the DVD player to readthe disc’s content. If you don’t see an on-screen dis-play after several minutes, some of the files are toobig — reduce the resolution of the JPEG files to lessthan 4 megapixels and burn another disc.The total number of files and folders on the disc arefree but the total number of files and folders on thefolder should be less than 1999.Some discs may be incompatible due to differentrecording format or condition of the disc.When you are using software such as “Easy CDCreator” to burn jpeg files on a CD-R, ensure that allthe selected files have the “.jpg” extension beforecopying into the CD layout.If the files have “.jpe” or “.jpeg” extensions, pleaserename them as “.jpg” files.File names without “.jpg” extension will not be able tobe read by this VCR/DVD Recorder, even though thefiles are shown as JPEG image files in WindowsExplorer.On CDs with mixed content (audio tracks, MP3 filesand JPEG files), you can select among the AUDIOCD menu, MP3 CD menu, and Photo CD menu bypressing TITLE repeatedly in Stop mode.JPEGPhoto Disc OperationMP3SelectMARKERTITLEMarkPhotoJPEG Folder 01 Folder 02Folder 03 Folder 04 Folder 05Folder 08Folder 06 Folder 07StartObjectSpeedSlide ShowCancelAllNormalPhotoJPEGMP3SelectMARKERTITLEMark4/20 90 90 Stop HidePrev NextFile 03.jpg

VCR Mode Tape Playback38PreparationBefore using the remote control, press the VCR but-ton to select the device to be operated.Turn the TV on and select the video input source con-nected to the VCR/DVD Recorder. Audio system: Turn the audio system on and selectthe input source connected to the VCR/DVDRecorder.Normal Playback 11Insert a prerecorded video cassette.The indicator will light and the VCR/DVD Recorderwill power-up automatically. Make sure that the TIMER indicator in the display window is not lighted. If it is, press POWER once.If a tape without a safety tab is inserted, the VCR/DVDRecorder will start playback automatically.22Press PLAY (N) once.PLAY icon appears on the TV screen.It is not necessary to select the tape speed for play-back. It will be automatically selected by the VCR/DVDRecorder.In playback, the TV/VCR selector switches to VCRmode automatically.33Press STOP (x) to stop playback.STOP icon appears on the TV screen.If the tape reaches the end before STOP (x) is pressed,the VCR/DVD Recorder will automatically stop, rewindand eject the tape, and turn itself off.Tracking Control Auto TrackingThe automatic tracking function adjusts the picture toremove snow or streaks.The AUTO TRACKING function works in the followingcases:Atape is played back for the first time.Tape speed (SP, LP, SLP) changes.Streaks or snow appear because of scratches on the tape.Manual TrackingIf noise appears on the screen during playback, presseither CH/TRK (v/V)on the remote control or CH (v/V) on the front panel until the noise on thescreen is reduced.In case of vertical jitter, adjust these controls very carefully.Tracking is automatically reset to normal when the tape isejected or the power cord is unplugged for more than 3 sec-onds.Special Effect Playback Special effects playback notesHorizontal lines (noise bars) will appear on the TV screen.This is normal.The audio is automatically muted during special effect modes,so there is no sound during search.During the high-speed picture search modes, a short time isneeded to stabilize tape speed when re-entering the PLAYmode. Slight interference may be observed during this time.Search This function lets you visually search forward and back-ward for a desired scene on your tape.1Press BACKWARD (m) or FORWARD (M)during playback.The VCR/DVD Recorder will be activated in theSEARCH mode.If the VCR/DVD Recorder is left in the SEARCH mode formore than 3 minutes, the VCR/DVD Recorder will auto-matically enter the PLAY mode, to protect the tape andvideo heads.2To return to playback, press PLAY (N).Still Picture and Frame-by-Frame Playback 1Press PAUSE/STEP (X) during playback.Astill picture appears on the TV screen.If a still picture vibrates vertically, stabilize it by usingCH/TRK (v/V)on the remote control.If the VCR/DVD Recorder is left in the STILL mode formore than 5 minutes, the VCR/DVD Recorder will auto-matically enter the STOP mode to protect the tape andvideo heads.2Press PAUSE/STEP (X) repeatedly to advance the video picture one frame at a time while viewing a stillpicture.3To return to playback, press PLAY (N).Slow Motion 1While in still mode, press FORWARD (M).The tape will be played back at a speed 1/19 timesslower than the normal speed. During slow playback, use CH/TRK (v/V) on the RemoteControl to minimize noise bands.If slow motion mode continues for more than 3 minutes,the VCR/DVD Recorder will automatically change to nor-mal play mode.2To return to playback, press PLAY (N).Counter Memory Function This is useful if there is a section of tape you want toview immediately after recording or if you want to returnto the same point several times.1Begin recording or playing a tape.2Press DISPLAY repeatedly to display the real-timecounter on the TV screen.3At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing CLEAR.Continue to play or record.4Press STOP when recording or playback finishes.5Press RETURN (O).The tape automatically stops when the tape counterreturns to about “0:00:00”.VHSVHSVHS

RECORDING39Basic RecordingBasic Recording from a TVFollow the instructions below to record a TV program.Recording starts immediately and continues until the disc ortape is full or you stop the recording.11Switch on the VCR/DVD Recorder, select thedevice (VCR or DVD) for Recording and load arecordable disc or tape.Also make sure that the TV input is set to this recorder.If you load a completely blank DVD-RW disc, Disc initial-ize menu will appear, to select a desired Recording Modeto initialize the disc (See page 24).22Set a recording mode as necessary by pressingREC MODE repeatedly. DVD: SP (Standard quality), LP (Low quality), XP(High quality)VCR: SP (Standard Play), SLP (Super Long Play)33Use CH (v/V) on the front panel or CH/TRK(v/V)on the remote control to select the TV channelto record.44Use AUDIO to select the audio channel torecord.The table below shows what will be recorded on the differ-ent settings for different types of broadcast. The last col-umn (Monitor Audio) shows what you’ll hear as it isrecording.•If you set the audio channel to SAP, but there is noSAP channel being broadcast, the main audio (mono orstereo) will be recorded.55Press REC (z) once.Recording will start. (The REC indicator lights in thedisplay window.) Recording continues until you press STOP (x) or thedisc (or tape) is full.To record for a fixed length of time, see Instant TimerRecording on right.66Press STOP (x) to stop recording.oteThe available recording DVD title number is 99.If the VCR/DVD Recorder is powered off during DVDrecording, the recording will not be saved.Instant Timer RecordingInstant Timer Recording allows you to make a recordingeasily of a preset length without using the programtimer.11Follow steps 1-4 as shown left (Basic Recordingfrom a TV).22Press REC (z) repeatedly to select the record-ing time length.Recording starts after the first press.DVD: Each subsequent press increases the recordingtime by 10 minutes (maximum 240 minutes) within freespace. VCR: Each subsequent press increases the recordingtime by 30 minutes (maximum 540 minutes). Please con-firm the VHS tape has enough remaining time to berecorded before recording.Instant Timer Record MenuChecking the Recording TimePress REC (z) or DISPLAY once to check the record-ing time. The recalled setting will automatically return tothe TV screen for a moment.Also, remaining time of recording is shown in the dis-play window.To Extend the Recording TimeThe recording time can be extended anytime by press-ing REC (z).Each subsequent press increases the recording time by10 minutes (DVD) within free space or 30 minutes(VCR) .To Pause the Recording1Press PAUSE/STEP (X) to pause the disc during recording.2When you want to continue recording, press PAUSE/STEP (X) or REC (z).otes•If you press PAUSE/STEP (X) during the InstantTimer Recording, it will be canceled.•The VCR/DVD Recorder will automatically power offwhen the Instant Timer Recording ends.To record one TV program while watching another1Press TV/VCR to select the TV mode during recording.The TV indicator appears.2Using the TV, select the channel to be viewed.ips (VCR mode only)Always use PAUSE/STEP (X) for best results when makingchanges during recording .For example: To change channels during recording, first pressPAUSE/STEP (X) to put the unit in pause mode. Then selectthe desired channel on the VCR/DVD Recorder, and pressPAUSE/STEP (X) again to resume recording.TV Broadcast Selected Audio Broadcast Audio MonitorLChR Ch AudioMONO MONO MONO MONO MONOSTEREO STEREO L R STEREOLeft L L LeftRight L R RightMONO MONO MONO MONOMONO+SAP MONO MONO MONO MONOSAP SAP SAP SAPSTEREO+SAP STEREO L R STEREOSAP SAP SAP SAPMONO MONO MONO MONOVCR120min RecDVD00:09:0530min RecMONOInput: Ch. 600:17:32SPMONOInput: Ch. 602H 01M FreeSP

Copying from DVD to VCRYou can copy the contents of a DVD to a VHS tapeusing the COPY button.oteIf the DVD (or Discs) you are attempting to copy is copyprotected, you will not be able to copy the disc. It is notpermitted to copy Macrovision encoded DVDs (orDiscs). “Copy-protected. Cannot record.” is displayed onthe TV screen.11Insert a DiscInsert the disc you wish to copy in the DVD deckand close the disc tray.22Insert a VHS TapeInsert a blank VHS videotape into the VCR deck.33Select DVD mode by pressing DVD on theremote control or pressing DVD/VCR on thefront panel.44Find the place on the DVD (or Disc) from whichyou want to start recording using the PLAY andPAUSE functions.For best results, pause playback at the point from whichyou want to record.55Press the COPY button on the remote control orfront panel.The Copy to VCR menu appears.66Use vv /VV /bb /BBto select the desired RecordMode:• SP (Standard Play)• SLP (Super Long Play, 3 times SP).77Select Copy then press ENTER or COPY to startcopying.ipIf you press PAUSE during Copy mode, both the DVD andVCR decks go into Pause mode and the “COPY” indicatorblinks on the front panel display. While in Pause mode,you can adjust the DVD playback position using PLAY,REW, FF, PAUSE/STEP, etc. The VCR deck will remain inPause mode. To resume copying, press the COPY buttontwice.88Stop the Copy ProcessTo stop copying at any other time, press STOP (x).You must stop the Copy process manually when theDVD movie ends, or the unit may replay and recordover and over again.Copying from VCR to DVDYou can copy the contents of a VHS tape to a DVD-Ror DVD-RW using the COPY button. This allows you toarchive your old VHS tapes to DVD.oteIf the VHS video tape you are attempting to copy iscopy protected, you will not be able to copy the tape. Itis not permitted to copy Macrovision encoded tapes.11Insert a VHS TapeInsert the VHS video tape you wish to copy into theVCR deck.22Insert a DVD-R or DVD-RW disc.Insert a blank DVD-R or DVD-RW disc in the DVDdeck and close the disc tray. oteWhen using a DVD-RW disc, you must initializebefore copying; see page 24.33Select VCR mode by pressing VCR on theremote control or pressing DVD/VCR on thefront panel.44Find the place on the VHS tape from which youwant to start recording using the PLAY, FF, REWand PAUSE functions.For best results, pause playback at the point from whichyou want to record.55Press the COPY button on the remote control orfront panel.The Copy to DVD menu appears.66Use vv /VV /bb /BBto select the desired RecordMode:• LP (Low Quality)• SP (Standard Quality)• XP (High Quality) 77Select Copy then press ENTER or COPY to startcopying.ipIf you press PAUSE during Copy mode, both the DVD andVCR decks go into Pause mode and the “COPY” indicatorblinks on the front panel display. While in Pause mode,you can adjust the VCR playback position using PLAY,REW, FF, PAUSE/STEP, etc. The DVD deck will remain inPause mode. To resume copying, press the COPY buttontwice.88Stop the Copy ProcessTo stop copying at any other time, press STOP (x).Copying will stop automatically when the VHS tapeends.40Basic Recording (Continued)Free SpaceRec. ModeCopy to VCR- - %SPCopy StopCopyFree SpaceRec. ModeCopy to DVD01:54MSPStop

Timer RecordingRECORDING41The Timer Recording function allows you to record up to8 programs within a period of one month.11Press TIMER REC.The Timer Record menu will appear.•Media – Choose a media (DVD or VCR).•Ch. – Choose a channel (2-69 or 1-125 for anten-na or cable channels respectively, excluding skipchannels), or one of the external inputs fromwhich to record (AV1 or AV2).•Date – Choose a date up to 1 monthin advance,or select a daily or weekly program.•Start Time – Set the recording start time.•End Time – Set the recording end time.•Mode – Choose a record mode.DVD: SP, LP, XP, or AT (Auto)VCR: SP, SLP, AT (Auto)AUTO mode determines how much time is avail-able on the disc or tape and switches recordmode, if necessary, to complete recording theprogram.22Enter the necessary information for your timerrecording(s).•b /B (left/right) – Move the cursor left/right•v /V (up/down) – Change the setting at the cur-rent cursor position•Press RETURN (O)to exit the Timer Recordmenu.•Press ENTER after filling in all the program infor-mation.•Press TIMER REC to display Timer Record List.33Press ENTER to save the program.The Timer Record List will appear.44Press RETURN (O) to exit the Timer RecordList.55Be sure to load a recordable disc or tape.ote•The Timer indicator lights on the front panel display.•If the Disc and Tape indicator are blinking, either no discor tape is loaded, or the loaded disc is not recordable.•The VCR/DVD Recorder will record the audio accordingto the current TV tuner setting (Stereo, Mono or SAP).Use the AUDIO button to set the audio before switchingthe VCR/DVD Recorder to Standby mode.•You must press STOP to stop the Timer Recording.•The VCR/DVD Recorder will automatically power offwhen the Timer Recording ends.•There is a short delay when a timer recording finishes toconfirm the recorded program. If two timer recordings areset to record sequentially (one right after the other), thevery beginning of the later program may not be recorded.Checking Timer Recording DetailsProgramming can be checked whenever the VCR/DVDRecorder is turned on. Press TIMER REC twice.•Use v/ Vto select a timer recording.•Press ENTER to edit the selected program.Timer Record menu appears.•Press CLEAR to delete the selected program from the Timer Record List.Canceling a Timer RecordingYou can clear a timer setting anytime before the record-ing actually starts.•Use v/ Vto select a program you want to erase onthe Timer Recorder List. If you want to erase the program, press CLEAR.Stopping a Timer Recording in ProgressAfter a timer recording has started, you can still cancelthe program.•Press STOP.Timer Recording TroubleshootingEven though the timer is set, the recorder will notrecord when:•There is no disc (or tape) loaded.•Anon-recordable disc (or tape) is loaded.•Disc Protect is set to ON in the Disc menu (see page 25).•There are already 99 titles recorded on the disc.You cannot enter a timer program when:•Arecording is already underway.•The time you’re trying to set has already passed.•There are already 8 timer programs set.If two or more timer programs overlap:•The earlier program takes priority.•When the earlier program finishes, the later programstarts.•If two programs are set to start at exactly the sametime, the program entered first takes priority.Confirmation is not possible when:•Disc Protect setting is set to ON.•There are already 99 titles recorded on the disc.If the disc is damaged, the recording may not completesuccessfully. In this case even though the Check fieldshows “Rec. OK”, it may not be.TIMER RECMedia Ch. Date Start Time End Time ModeTimer RecordOK Timer Rec List Close198 min FreeCh.11DVD 10/16 Thu 10:07 AM 11:00 AM SPSPMedia Start Time DurationDateCh. Mode CheckTimer Record ListEdit CloseDeleteCLEAR10/19 SunCh.11 18:07 AM 30min SP Rec. OKTimer RecTIMER REC

Recording from an External Input42Recording from External ComponentsYou can record from an external component, such as acamcorder or VCR, connected to any of the VCR/DVDRecorder’s external inputs.11Make sure that the component you want torecord from is connected properly to theVCR/DVD Recorder. See page 17.22Press INPUT repeatedly to select the externalinput to record from.•AV1: Audio/Video Input mounted on back panel •AV2 (AV2 COMP): Audio/Video Input mounted on frontpanel •DV: DV Input mounted on front panel oteCheck that the Audio In settings DV Rec Audio are asyou want them. See page 24.33Load a recordable disc or tape.44Set a recording mode as necessary by pressingREC MODE repeatedly. DVD: SP (Standard Quality), LP (Low Quality), XP(High Quality)VCR: SP (Standard Play), SLP (Super Long Play)55Press REC (z) once.Recording will start. (The REC indicator lights in thedisplay window.) Recording continues until you press STOP (x) or thedisc is full.To record for a fixed length of time, see Instant TimerRecording on page 39.66Press STOP (x) to stop recording.oteIf your source is copy-protected using CopyGuard, you will notbe able to record it using this recorder. See Copyright on page8 for more details.Recording from a Digital CamcorderYou can record from a digital camcorder connected tothe DV IN jack on the front panel of this VCR/DVDRecorder. You can use the VCR/DVD Recorder’sremote to control both the camcorder and the VCR/DVDRecorder. Before recording, make sure that the audioinput for the DV IN jack is set up (see page 24).ips•The source signal must be DVC-SD format.•Some camcorders cannot be controlled using theVCR/DVD Recorder remote.•If you connect a second DVD recorder using a DVcable, you cannot control the second recorder fromthis one.•You cannot control the VCR/DVD Recorder remotelyfrom a component connected to the DV IN jack.•You cannot record date and time information from aDV cassette.11Make sure your digital camcorder is connectedto the front panel DV IN jack. See page 17.22Check that the DV audio input is as you require.You can choose between Audio 1 (original audio) andAudio 2 (overdubbed audio).•DV Input is set from the DV Rec Audio in sub-menu ofthe General menu. See DV Rec Audio on page 24 formore information.33Press INPUT repeatedly to select the DV input.DV appears in the display window.44Find the place on the camcorder tape fromwhich you want to start recording.For best results, pause playback at the point from whichyou want to record.•Depending on your camcorder, you can use thisVCR/DVD Recorder’s remote control to control thecamcorder using the STOP, PLAY and PAUSE func-tions.55Press REC (z) once to start recording.•Recording is automatically stopped if the recorderdetects no signal.•You can pause or stop the recording by pressingPAUSE/STEP or STOP. You cannot control the cam-corder from this remote control during recording.•In Video mode, the final frame of the recording mayremain displayed on screen for a while after recordingstops.Playing Recordings on Other DVDPlayersMost regular DVD players can play finalized discsrecorded in Video mode. A small number of playerscan also play DVD-RW discs recorded in VR mode,finalized or not. Check the manual that came with theother player to check what kinds of discs it will play.Finalizing a DiscFinalizing ‘fixes’ the recordings in place so that thedisc can be played on a regular DVD player or com-puter equipped with a suitable DVD-ROM drive.Finalizing a Video mode disc creates a menu screenfor navigating the disc. This is accessed by pressingDISC MENU or TITLE. To finalize a disc, refer to“DISC Finalize”on page 25.

VR Mode: Original and Playlist Editing44Edits you make to the Original content changes theactual content of the disc. For example, if you delete atitle or chapter from the Original content (Title orChapter), that title or chapter is deleted from the disc,freeing up extra recording time.When you edit the Playlist, on the other hand, you arenot changing the content of the disc. For example,when you delete a title from the Playlist, you are justtelling the recorder not to play that title; nothing is actu-ally deleted from the disc.Titles, Chapters and Parts Titles in the disc’s original content contain one or morechapters. When you insert a title into the Playlist, all thechapters within that title also appear. In other words,chapters in the Playlist behave exactly as chapters on aDVD-Video disc do. Parts are sections of Original orPlaylist titles. From the Original and Playlist menu youcan add or delete parts. Adding a chapter or title to thePlaylist creates a new title made up of a section (ie.,chapter) of an Original title. Deleting a part removespart of a title from the Original or Playlist menu.Caution•When editing using the Delete, Add and Move func-tions, the start and end frames may not be exactly asset in the start and end point display.•During Playlist playback, you may notice a momen-tary pause between edits. This is not a malfunction.Adding Chapter MarkersYou can put a chapter marker anywhere in a Playlist orOriginal title during recording or playback.Once the chapter is marked, you can use the ChapterSearch feature, as well as Erase, combine and movechapters in the Original (Chapter) or Playlist (Chapter)menu.You can insert up to 999 chapter markers in both theOriginal and Playlist contents.11Play the title (Original or Playlist).22At the point you want to start a new chapter,press CHP ADD.Achapter marker icon appears on the TV screen.•You can also put chapter markers during recording.Changing Title or Chapter ThumbnailsEach title and chapter displayed in the Original orPlaylist menu is represented by a thumbnail picturetaken from the start of that title or chapter.If you prefer, select a different still picture from within atitle.11Play the title (Original or Playlist).22Press THUMBNAIL to make the currently dis-played picture the one that appears in theOriginal or Playlist menu.The still picture that you choose appears in both theOriginal or Playlist menu.ipYou can also change the thumbnail picture of the title onthe Original (Chapter) or Playlist (Chapter) menu. Selecta chapter on the Original (Chapter) or Playlist (Chapter)menu then press THUMBNAIL. The thumbnail picture ofthe title that includes the chapter is changed.Thumb.VRChapterVRVR

VR Mode: Original and Playlist Editing (Continued)Using the Original (Title) menu The Original (Title) is where you build and edit yourPlaylist, and where you can delete titles and make otherchanges to the Original content of the disc. You canalso play individual titles directly from the Original (Title)menu.11Press DISC MENU/LIST repeatedly to displaythe Original (Title) menu.•Use the v/Vbuttons to display the previous/nextpage if there are more than 6 titles or chapters.•To exit the menu, press RETURN (O).oteTo switch between the Original (Title) and Playlist(Title) menu, press DISC MENU/LIST repeatedly.The Original and Playlist heading at the top of thescreen indicate which mode you are in.22To view Original (Title) options, select the titleyou want then press ENTER.Original (Title) options appears on the left side ofthe Original (Title) display.33Use v/ Vto select an option then press ENTERto confirm.Play: Start playback of theselected title.View Chap.: Shows theOriginal (Chapter) menu of thetitle (Refer to right column onthis page).Rename: Edits the title name.(page 47)Delete: Deletes the title from theOriginal (Title) menu. (see page47)Playlist Add: Adds the title tothe Playlist. (see page 48)Delete Part: Deletes a part ofthe Title. (see page 50)Copy to VCR: Copys the title toa VHS tape.44Press RETURN (O) repeatedly to exit theOriginal (Title) menu.ipPress DISPLAY to display more detailed title informationfor selected title.Using the Original (Chapter) menu11Press DISC MENU/LIST repeatedly to displayOriginal (Title) menu.22Use vVbBto choose the title you want toview Original (Chapter) menu then pressENTER.Original (Title) options appears on the left side ofthe Original (Title) menu.33Use v/ Vto select “View Chap.” from Original(Title) options then press ENTER.Original (Chapter) menu appears on the TV screen.44To view Original (Chapter) options, select thechapter you want then press ENTER.Original (Chapter) options appears on the left sideof the Original (Chapter) menu.55Use v/ Vto select an option then press ENTERto confirm.Play: Starts playback of theselected chapter.View Title: Shows the Original(Title) menu (refer to left on thispage)Delete: Deletes the chapterfrom the Original (Chapter)menu. (page 47)Merge: Merges two chaptersinto one. (page 49)Playlist Add: Adds the chapterto the Playlist. (page 48)66Press RETURN (O) repeatedly to exit Original(Chapter) menu.VRVREDITING45Original -TitleDVD-VR1hour 57minPlaylistLISTFreeSPCloseInfo.DISPLAYSelectTITLE 110/12 0:25:20TITLE 210/14 0:5:12TITLE 310/16 0:2:341/4TITLE 410/17 0:6:06PlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCROriginal -ChapterTITLE 110/12/2003 Wed 0:25:20 TV 111/3PlaylistLISTCloseSelectPlayView TitleDeleteMergePlaylist Add

VR Mode: Original and Playlist Editing (Continued)Using the Playlist (Title) Menu 11Press DISC MENU/LIST repeatedly to displaythe Playlist (Title) menu.•Use the v/Vbuttons to display the previous/nextpage if there are more than 6 titles or chapters.•To exit the Playlist (Title), press RETURN (O).22To view Playlist (Title) options, select the titleyou want then press ENTER.Playlist (Title) options appears on the left side of thePlaylist (Title) menu.33Use v/ Vto select an option then press ENTERto confirm.Play: Start playback the select-ed title.View Chap.: Shows the Playlist(Chapter) menu of the title(Refer to right on this page).Rename: Edits the title name.(page 47)Delete: Deletes the title from thePlaylist (Title) menu. (page 47)Delete Part: Deletes a part ofthe Title. (page 50)Copy to VCR: Copys the title toa VHS tape.44Press RETURN (O) repeatedly to exit Playlist(Title) menu.Using the Playlist (Chapter) Menu 11Press DISC MENU/LIST repeatedly to display thePlaylist (Title) menu.22Use vVbBto choose the title you want toview Playlist (Title) menu then press ENTER.Playlist (Title) options appears on the left side of thePlaylist (Title) menu.33Use v/ Vto select ‘View Chap.’ from Playlist(Title) options then press ENTER.Playlist (Chapter) menu appears on the TV screen.44To view Playlist (Chapter) options, select thechapter you want then press ENTER.Playlist (Chapter) options appears on the left side ofthe Playlist (Chapter) menu.55Use v/ Vto select an option then press ENTERto confirm.Play: Starts playback of theselected chapter.View Title: Shows the Playlist(Title) menu (Refer to left onthis page).Delete: Deletes the chapter fromthe Playlist (Chapter) menu(page 47).Move: Moves a chapter ofPlaylist (Chapter) to a positionon the Playlist (Chapter) menu(page 49).Merge: Merges two chaptersinto one (page 49).66Press RETURN (O) repeatedly to exit Playlist(Chapter) menu.VRVR46Playlist -TitleTITLE 110/12 0:25:20TITLE 210/14 0:5:121/2OriginalLISTCloseSelectPlayView Chap.RenameDeleteDelete PartCopy to VCRPlaylist -ChapterOriginalLISTCloseSelectTITLE 110/12/2003 Wed 0:25:20 TV 111/3PlayView TitleDeleteMoveMerge

EDITING47VR Mode: Original and Playlist Editing (Continued)Naming a Title You can name Original and Playlist titles independently.Names can be up to 32 characters long.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) or Playlist (Title) menu.22Use vVbBto choose the title you want toname then press ENTER.Options appears on the left side of the menu.Original (Title) Playlist (Title)33Use v/Vto select ‘Rename’ option then pressENTER. The Keyboard menu appears.44Enter a name for the title. Use vVbBto selecta character then press ENTER to confirm yourselection. Refer step 5 as shown on page 26(DISC Name).55Choose OK then press ENTER to save the nameand return to the previous menu screen.66Press RETURN (OO) repeatedly to exit themenu.oteFor discs formatted on a different DVD Recorder, youwill see only a limited character set.Deleting an Original or Playlist Title/Chapter When you erase a title or chapter from the Playlistmenu, you only remove it from the Playlist; thetitle/chapter remains in the Original menu.If you choose to delete a title or chapter from theOriginal (title/chapter) menu, the title or chapter is actu-ally deleted from the disc and the remaining time avail-able for recording increases. Titles/chapters deletedfrom the Original are also removed from the Playlist.oteIt may not be possible to delete chapters that are lessthan 3 seconds long.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) or Playlist (Title) menu.If you want to display the Original (Chapter) orPlaylist (Chapter) menu, refer to “Using Original(Chapter) menu” or “Using Playlist (Chapter) menu”on pages 45-46.22Use vVbBto choose a chapter or title youwant to delete then press ENTER.Options appears on the left side of the screen.33Select ‘Delete’ on the menu.e.g., If you select “Delete” on Original (Title) menu.44Press ENTER to confirm.The confirm message for deleting will appear.55Use b/ Bto select ‘Yes’then press ENTER.The selected chapter or title is deleted.After pressing ENTER, the new, updated menu isdisplayed.66Repeat steps 2 - 5 to continue to delete from themenu.77Press RETURN (OO) repeatedly to exit themenu.VRVR0123456789ABCDEFGH I JKLMNOPQRSTUVWXYZTITLE 2English/Latin CapitalLanguageOK CancelSpace DeletePlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCRPlayView Chap.RenameDeleteDelete PartCopy to VCRPlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCR

Making a New Playlist Use this function to add an Original title or chapter tothe Playlist. When you do this, the whole title is put intothe Playlist (you can delete bits you don’t need later —see Deleting an Original or Playlist Title/Chapter onpage 48).The title appears in the Playlist complete with the chap-ter markers that appear in the Original. However, if youadd more chapter markers to the Original later, theseare not automatically copied over into the Playlist title.You can add up to 999 chapters to one disc . If you onlywant to add a chapter of a title, use the Adding atitle/chapter to the Playlist on this page.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) menu. If you want to display the Original (Chapter) menu,refer to “Using the Original (Chapter) menu” onpage 45.22Choose a title or chapter on the Original menuto put into the Playlist, then press ENTER.Original (Title or Chapter) options appears on theleft side of the Original (Title or Chapter) menu.Original (Title) Original (Chapter)33Use v/ Vto select ‘Playlist Add’ from from theOriginal (Title or Chapter) options then pressENTER.44Select ‘New Playlist’ then press ENTER.The new title appears in the updated Playlist. Allchapters of the title are added to the Playlist.Adding Titles/Chapters to the PlaylistYou can add an Original title or chapter to add to aPlaylist title even if it is already registered.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) menu. If you want to show the Original (Chapter) menu,refer to “Using the Original (Chapter)” on page 45.22Choose an Original title or chapter to put intothe Playlist, then press ENTER.The Original (Title) or Original (Chapter) optionsappear on the left side of the screen.Original (Title) Original (Chapter)33Use v/ Vto select ‘Playlist Add’ from theOriginal (Title) or Original (Chapter) optionsthen press ENTER.44Choose a Playlist title that is already registeredto insert a title, then press ENTER.The title appears in the updated Playlist menu.55Repeat steps 1-4 to continue adding to thePlaylist.66Press RETURN (OO) to exit, or DISC MENU/LISTto go back to the Original (Title) menu.VRVRVR Mode: Original and Playlist Editing (Continued)48New PlaylistSelect Playlist.TITLE 1PlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCRPlayView TitleDeleteMergePlaylist AddNew PlaylistSelect Playlist.PlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCRPlayView TitleDeleteMergePlaylist AddPlaylist -TitleTITLE 110/12 0:25:20TITLE 210/14 0:5:123/3TITLE 310/19 0:17:23OriginalLISTCloseSelect

VR Mode: Original and Playlist Editing (Continued)EDITING49Combining Two Chapters Into One Use this function to combine two adjacent Playlist orOriginal chapters into one.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) or Playlist (Title) menu. If you want to display the Original (Chapter) orPlaylist (Chapter) menu, refer to “Using the Original(Chapter)” and “Using the Playlist (Chapter)” onpage 45-46.22First, select the second chapter of the two chap-ters you want to combine then press ENTER onthe Original (Chapter) or playlist (Chapter)menu.Playlist (Chapter) or Original (Chapter) optionsappears on the left side of the screen.Original (Chapter) Playlist (Chapter)33Use v/ Vto select ‘Merge’ option then pressENTER.The confirm message for combining will appear.44Use b/ Bto select ‘Yes’then press ENTER.After pressing ENTER, the new, updated menu isdisplayed.55Repeat steps 2 - 5 to continue to merge fromthe menu.66Press RETURN (OO) repeatedly to exit themenu.oteThis function cannot operate listed below;•If there is only one chapter within the title.•If two chapters created by erasing a part from anoriginal title.•If two chapters created from different titles.•If two chapters created by moving an order from anoriginal title.Moving a Playlist Chapter Use this function to re-arrange the playing order ofPlaylist chapters on the Playlist (Title) menu.11Press DISC MENU/LIST repeatedly to displayPlaylist (Title) menu.To display the Playlist (Chapter) menu, refer to“Using the Playlist (Chapter)” on page 46.oteThis function is not available if there is only one chapter.22Select a chapter from the Playlist (Chapter)menu.33Press ENTER.Playlist (Chapter) options appears on the left side ofthe screen.44Use v/ Vto select ‘Move’ from Playlist options then press ENTER.55Use vVbBto choose the place you want tomove the chapter to then press ENTER.The confirm message for moving will appear.66Use b/ Bto select ‘Yes’then press ENTER.After pressing ENTER, the new, updated menu isdisplayed.77Repeat steps 2 - 6 to continue to move from themenu.88Press RETURN (O) repeatedly to exit themenu.VRVRPlayView TitleDeleteMoveMergePlayView TitleDeleteMergePlaylist AddPlayView TitleDeleteMoveMergePlaylist -ChapterOriginalLISTCloseSelectTITLE 110/12/2003 Wed 0:25:20 TV 111/3

VR Mode: Original and Playlist Editing (Continued)Deleting a Part You can delete a part which you do not want in the title.11Press DISC MENU/LIST repeatedly to displayOriginal (Title) or Playlist (Title) menu.22Use vVbBto choose a title you want todelete then press ENTER.The options appears on the left side of the menu.Original (Title) Playlist (Title)33Use v/ Vto select ‘Delete Part’ then pressENTER.The Title Edit menu appears on the TV screen andthe VCR/DVD Recorder goes into Pause mode.The Start Point option is highlighted.44Use PLAY, PAUSE/STEP, FF, REW, and SlowMotion playback to find the starting point.The segment is indicated in yellow on the ProgressBar.55Press ENTER at the starting point of the seg-ment you want to erase.The End Point option is selected.66Use PLAY, PAUSE/STEP, FF, REW, and SlowMotion playback to find the ending point.77Press ENTER at the ending point of the sectionyou want to edit.The Done option is selected.To cancel the Edit mode, select Cancel using v/Vthen press ENTER.88Press ENTER to delete the selected part.When the confirm menu appears, select “Yes” usingb/ B then press ENTER.To erase additional segments, repeat steps 4-8.99When finished editing, press RETURN (O).The Original (Title) or Playlist (Title) menu appears.oteIf you select Cancel then press ENTER, the VCR/DVDRecorder will go to previous option and into Pausemode.VR50PlayView Chap.RenameDeletePlaylist AddDelete PartCopy to VCRPlayView Chap.RenameDeleteDelete PartCopy to VCRTitle EditMove PointSelectStart PointPlay & Select the Start Point-Delete PartEnd PointCancelDone00:00:00StartEndTITLE 210/14 0:34:12Close

Video Mode: Original EditingUsing the Title ListFrom the Title List display you can play, name anderase titles.Once a Video mode disc is finalized, the Title Listscreen changes its appearance and all you can do isselect titles to play.11Press DISC MENU/LIST to display the Title List.22Use v/ Vto choose a title then press ENTER.Title List options appears on the left side of the TitleList display.If you get more information, press Display 33Use v/ Vto select an option then press ENTERto confirm.Play: Start playback the select-ed title.Rename: Edits the title name(page 47).Delete: Deletes the title from theTitle List.Copy to VCR: Copys the title toa VHS tape. 44Press RETURN (O) repeatedly to exit Title List.Deleting a TitleBefore a disc is finalized, you can erase titles recordedon the disc.Caution•If you erase a title from a DVD-R disc,the title will dis-appear from the Title List, but the available recordingtime will not increase.•When erasing a title from a DVD-RW disc, theremaining time available for recording will onlyincrease if it is the last title on the disc.11Press DISC MENU/LIST to display Title List22Use vVbBto choose a title you want to erasethen press ENTER.Title List options appears on the left side of the TitleList screen.33Use v/ Vto select ‘Delete’ then press ENTER toconfirm.The confirm message for deleting will appear.44Use b/ Bto select ‘Yes’then press ENTER.The selected chapter or title is deleted.After pressing ENTER, the new, updated menu isdisplayed.55Repeat steps 2 - 4 to continue to delete from themenu.66Press RETURN (OO) to exit the menu.If the disc has already been finalizedYou will see a screen as shown below:VideoVideoEDITING51PlayRenameDeleteCopy to VCRPlayRenameDeleteCopy to VCRTitle ListDVD VIDEOTITLE 1 1/ 3 0:02:01TITLE 2 1/ 3 0:06:21TITLE 3 4/ 12 0:52:311/31hour 57minFreeSPTitle DurationDateCloseInfo.DISPLAYSelectDVD VIDEO 1/1PAGEUPPAGEDOWNEXIT1 TITLE 1 1/03 0:02:012 TITLE 2 1/03 0:24:123 TITLE 3 1/03 0:36:30Disc nameTitle listExits the Title List screen.Moves to the next or previous pageIndicates total and current page number

Controlling Your TV with the Supplied Remote52You can control the sound level, input source, andpower switch of your LG TV with the supplied remote.You can control your TV using the buttons below.By pressing You canPOWER Turn the TV on or off.INPUT Switch the TV’s input source between the TV and other inputsources.CH +/– Scans up or down through memorized channels.VOL +/– Adjust the volume of the TV.MUTE Turns on or off TV sound.oteDepending on the unit being connected, you may not beable to control your TV using some of the buttons.Controlling other TVs with the remoteYou can control the sound level, input source, andpower switch of non-LG TVs as well. If your TV is listedin the table below, set the appropriate manufacturercode.1. While holding down TV POWER button, pressthe number buttons to select the manufacturercode for your TV (see the table below).2. Release TV POWER button.Code numbers of controllable TVsIf more than one code number is listed, try enteringthem one at a time until you find the one that works withyour TV.Manufacturer Code NumberLG / GoldStar 1 (Default), 2Zenith 1, 3, 4Samsung 6, 7Sony 8, 9Hitachi 4otesDepending on your TV, some or all buttons may notfunction on the TV, even after entering the correctmanufacturer code.If you enter a new code number, the code numberpreviously entered will be erased.When you replace the batteries of the remote, thecode number you have set may be reset to thedefault setting. Set the appropriate code numberagain.TV ControlButtons

Language Code ListREFERENCE53Code Language 6566 Abkhazian6565 Afar6570 Afrikaans8381 Albanian6577 Amharic6582 Arabic7289 Armenian6583 Assamese6588 Aymara6590 Azerbaijani6665 Bashkir6985 Basque6678 Bengali; Bangla6890 Bhutani6672 Bihari6682 Breton6671 Bulgarian7789 Burmese6669 Byelorussian7577 Cambodian6765 Catalan9072 Chinese6779 Corsican7282 Croatian6783 Czech6865 Danish7876 Dutch6978 English6979 Esperanto6984 Estonian7079 FaeroeseCode Language 7074 Fiji7073 Finnish7082 French7089 Frisian7176 Galician7565 Georgian6869 German6976 Greek7576 Greenlandic7178 Guarani7185 Gujarati7265 Hausa7387 Hebrew7273 Hindi7285 Hungarian7383 Icelandic7378 Indonesian7365 Interlingua7165 Irish7384 Italian7465 Japanese7487 Javanese7578 Kannada7583 Kashmiri7575 Kazakh7589 Kirghiz7579 Korean7585 Kurdish7679 Laothian7665 Latin7686 Latvian, LettishCode Language 7678 Lingala7684 Lithuanian7775 Macedonian7771 Malagasy7783 Malay7776 Malayalam7784 Maltese7773 Maori7782 Marathi7779 Moldavian7778 Mongolian7865 Nauru7869 Nepali7879 Norwegian7982 Oriya8065 Panjabi8083 Pashto, Pushto7065 Persian8076 Polish8084 Portuguese8185 Quechua8277 Rhaeto-Romance8279 Romanian8285 Russian8377 Samoan8365 Sanskrit7168 Scots Gaelic8382 Serbian8372 Serbo-Croatian8378 Shona8368 SindhiCode Language 8373 Singhalese8375 Slovak8376 Slovenian8379 Somali6983 Spanish8385 Sudanese8387 Swahili8386 Swedish8476 Tagalog8471 Tajik8465 Tamil8484 Tatar8469 Telugu8472 Thai6679 Tibetan8473 Tigrinya8479 Tonga8482 Turkish8475 Turkmen8487 Twi8575 Ukrainian8582 Urdu8590 Uzbek8673 Vietnamese8679 Volapük6789 Welsh8779 Wolof8872 Xhosa7473 Yiddish8979 Yoruba9085 ZuluEnter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 20).

Country Code List54Code CountryAD AndorraAE United Arab EmiratesAF AfghanistanAG Antigua and BarbudaAI AnguillaAL AlbaniaAM ArmeniaAN Netherlands AntillesAO AngolaAQ AntarcticaAR ArgentinaAS American SamoaAT AustriaAU AustraliaAW ArubaAZ AzerbaidjanBA Bosnia-HerzegovinaBB BarbadosBD BangladeshBE BelgiumBF Burkina FasoBG BulgariaBH BahrainBI BurundiBJ BeninBM BermudaBN Brunei DarussalamBO BoliviaBR BrazilBS BahamasBT BhutanBV Bouvet IslandBW BotswanaBY BelarusBZ BelizeCA CanadaCC Cocos (Keeling) IslandsCF Central African RepublicCG CongoCH SwitzerlandCI Ivory CoastCK Cook IslandsCL ChileCM CameroonCN ChinaCO ColombiaCR Costa RicaCS Former CzechoslovakiaCU CubaCV Cape VerdeCX Christmas IslandCY CyprusCZ Czech RepublicDE GermanyDJ DjiboutiDK DenmarkDM DominicaDO Dominican RepublicDZ AlgeriaEC EcuadorEE EstoniaEG EgyptEH Western SaharaCode CountryER EritreaES SpainET EthiopiaFI FinlandFJ FijiFK Falkland IslandsFM MicronesiaFO Faroe IslandsFR FranceFX France (European Territory)GA GabonGB Great BritainGD GrenadaGE GeorgiaGF French GuyanaGH GhanaGI GibraltarGL GreenlandGM GambiaGN GuineaGP Guadeloupe (French)GQ Equatorial GuineaGR GreeceGS S. Georgia & S. SandwichIsls.GT GuatemalaGU Guam (USA)GW Guinea BissauGY GuyanaHK Hong KongHM Heard and McDonaldIslandsHN HondurasHR CroatiaHT HaitiHU HungaryID IndonesiaIE IrelandIL IsraelIN IndiaIO British Indian OceanTerritoryIQ IraqIR IranIS IcelandIT ItalyJM JamaicaJO JordanJP JapanKE KenyaKG KyrgyzstanKH Cambodia6KI KiribatiKM ComorosKNSaint Kitts & Nevis AnguillaKP North KoreaKR South KoreaKW KuwaitKY Cayman IslandsKZ KazakhstanLA LaosLB LebanonCode CountryLC Saint LuciaLI LiechtensteinLK Sri LankaLR LiberiaLS LesothoLT LithuaniaLU LuxembourgLV LatviaLY LibyaMA MoroccoMC MonacoMD MoldaviaMG MadagascarMH Marshall IslandsMK MacedoniaML MaliMM MyanmarMN MongoliaMO MacauMP Northern Mariana IslandsMQ Martinique (French)MR MauritaniaMS MontserratMT MaltaMU MauritiusMV MaldivesMW MalawiMX MexicoMY MalaysiaMZ MozambiqueAN NamibiaNC New Caledonia (French)NE NigerNF Norfolk IslandNG NigeriaNI NicaraguaNL NetherlandsNO NorwayNP NepalNR NauruNU NiueNZ New ZealandOM OmanPA PanamaPE PeruPF Polynesia (French)PG Papua New GuineaPH PhilippinesPK PakistanPL PolandPM Saint Pierre and MiquelonPN Pitcairn IslandPR Puerto RicoPT PortugalPW PalauPY ParaguayQA QatarRE Reunion (French)RO RomaniaRU Russian FederationRW RwandaSA Saudi ArabiaSB Solomon IslandsCode CountrySC SeychellesSD SudanSE SwedenSG SingaporeSH Saint HelenaSI SloveniaSJ Svalbard and Jan MayenIslandsSK Slovak RepublicSL Sierra LeoneSM San MarinoSN SenegalSO SomaliaSR SurinameST Saint Tome and PrincipeSU Former USSRSV El SalvadorSY SyriaSZ SwazilandTC Turks and Caicos IslandsTD ChadTF French SouthernTerritoriesTG TogoTH ThailandTJ TadjikistanTK TokelauTM TurkmenistanTN TunisiaTO TongaTP East TimorTR TurkeyTT Trinidad and TobagoTV TuvaluTW TaiwanTZ TanzaniaUA UkraineUG UgandaUK United KingdomUM USA Minor OutlyingIslandsUS United StatesUY UruguayUZ UzbekistanVA Vatican City StateVC Saint Vincent &GrenadinesVE VenezuelaVG Virgin Islands (British)VI Virgin Islands (USA)VN VietnamVU VanuatuWF Wallis and Futuna IslandsWS SamoaYE YemenYT MayotteYU YugoslaviaZA South AfricaZM ZambiaZR ZaireZW ZimbabweEnter the appropriate code number for the initial setting “Country Code” (See page 23).

REFERENCE55TroubleshootingCheck the following guide for the possible cause of a problem before contacting service.SymptomNo power.No picture.No sound.Playback picture is poor.VCR/DVD Recorder doesnot start playback.Picture from external inputis distortedSome channels are skipped over when usingCH (v/ V)Picture or sound of broadcasting channel isweak or missing.Camcorder image notshown.Camcorder image via A/Vinput or DV IN toVCR/DVD Recorder is notshown on TV screen.Can’t play disc recordedon this VCR/DVDRecorder on another DVDplayer.CauseThe power cord is disconnected.The TV is not set to receive VCR/DVDRecorder signal output.The video cable is not connected securely.The TV power is turned off.The equipment connected with the audiocable is not set to receive VCR/DVDRecorder signal output.The audio cables are not connected securely.The power of the equipment connected withthe audio cable is turned off.The audio connecting cord is damaged.The disc is dirty.Tape heads are dirty.Tape is a rental or was recorded on anotherVCR.No disc is inserted.No tape is inserted.An unplayable disc is inserted.The disc is placed upside down.The disc is not placed within the guide.The disc is dirty.The Movie Rating level is set.The video signal from the external compo-nent is copy-protected.The skipped channels were deleted with theCH. Add/Del feature.Antenna or cables are loose.Wrong Tuning Band is selected in theVCR/DVD Recorder Setup menu.Camcorder is off.VCR/DVD Recorder’s source is not set toAV1, AV2 (AV2 COMP) or DV IN.The disc was recorded in Video mode.Some players will not play even a finalizeddisc recorded in Video mode.The disc was recorded in VR mode.Discs recorded with copy-once material can-not be played on other players.SolutionPlug the power cord into the wall outletsecurely.Select the appropriate video input on the TVso the picture from the VCR/DVD Recorderappears on the TV screen.Connect the video cable securely. Turn on the TV. Select the correct input mode on the audioreceiver so you can listen to the sound fromthe VCR/DVD Recorder.Connect the audio cable securely.Turn on the equipment connected with theaudio cable.Replace it with a new one.Clean the disc.Clean video heads.Use v/Vfor manual tracking adjustment whiletape is playing.Insert a disc or tape. (Check that the disc indicator on the front panel display is lit.) Insert a playable disc. (Check the disc type,color system, and regional code.)Place the disc with the playback side down.Place the disc on the disc tray correctly insidethe guide.Clean the disc.Cancel the Movie Rating function or changethe rating level.You cannot connect via the VCR/DVDRecorder. Connect the component directly toyour TV.Use the CH. Add/Del feature to restore chan-nels. See “To Add or Erase Channels fromMemory” on page 19. Tighten connections or replace cable.Try “Tuning Band Select” options; see page18 for details.Turn camcorder on and operate properly.Use INPUT to select AV input channel (AV1,AV2 (AV2 COMP) or DV IN).Finalize the disc; see page 25.No solution.The other player must be RW compatible inorder to play it.No solution.

Troubleshooting (Continued)56SymptomCannot record or did notrecord successfully.Timer Recording not possi-ble.Stereo Audio Recordand/or Playback not pres-ent.Remote control does notwork properly.CauseThe remaining blank space on the disc isinsufficient.The source you are trying to record is copy-protected.When setting the recording channel, thechannel is tuned on the TV’s own tuner.When recording to a Video mode disc, pro-grams that are copy-once protected cannotbe recorded.Clock in VCR/DVD Recorder is not set tocorrect time.Timer has been programmed incorrectly.TIMER indicator light does not appear afterprogramming timer.TV is not Stereo-compatible.Broadcast program is not in stereo format.VCR/DVD Recorder A/V Out jacks are notconnected to TV A/V In jacks.VCR/DVD Recorder Audio/Video Out is notselected for viewing at the TV.VCR/DVD Recorder’s TV audio channel isset to SAP or MONO.The remote control is not pointed at theremote sensor of the VCR/DVD Recorder.The remote control is too far from theVCR/DVD Recorder.There is an obstacle in the path of theremote control and the VCR/DVD Recorder.The batteries in the remote control areexhausted.SolutionUse another disc.You cannot record the source.Select the channel on the VCR/DVDRecorder’s built-in TV tuner.Use a VR mode formatted disc for copy-oncematerial.Set clock to correct time. See “Auto ClockSet” or “Manual Clock Set” on page 19.Reprogram Timer. See “Timer Recording” onpage 41.Reprogram Timer.No solution.No solution.Make A/V connections. Stereo is availableonly via A/V output from VCR/DVD Recorder.Select AUX or A/V source as TV input.Set TV audio channel mode to Stereo. See“Changing TV Audio Channel” on page 27.Point the remote control at the remote sensorof the VCR/DVD Recorder.Operate the remote control within 23 ft (7 m).Remove the obstacle.Replace the batteries with new ones.Moisture CondensationMoisture condensation can occur:•When the VCR/DVD Recorder is moved from a coldplace to a warm place.•Under extremely humid conditions.In locations where moisture condensation may occur:•Keep the VCR/DVD Recorderplugged into an AC poweroutlet with POWER On. This will help prevent conden-sation.•When condensation has occurred, wait a few hoursfor the VCR/DVD Recorder to dry before using it.Reset the VCR/DVD RecorderIf you observe any of the following symptoms...When the VCR/DVD Recorder is plugged in, but the power will not turn on or off.When the display window does not working.When the VCR/DVD Recorder does not operate normally.You can reset the VCR/DVD Recorder as follows :Press and hold the POWER button for more than five seconds. This will force the VCR/DVD Recorder to power off. . Press the POWER button again to turn the VCR/DVD Recorder back on.Unplug the power cord and then plug the power cord again after more than five seconds.

SpecificationsREFERENCE57GeneralPower requirements AC 120V, 60 HzPower consumption 35W Dimensions (approx.) 430 X 83.5 X 360 mm (16.9 x 3.25 x 14.2 inches) (w x h x d)Mass (approx.) 6.8 kg (14.9 lbs)Operating temperature 5˚C to 35˚C (41˚F to 95˚F)Operating humidity 5 % to 90 %Signal system NTSCRecording Recording format DVD VideoRecording, DVD-VIDEORecordable discs DVD-ReRecordable, DVD-RecordableRecordable time DVD ; Approx. 1 hour (XP mode), 2 hours (SP mode), 4 hours (LP mode)VCR ; SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)Video recording formatSampling frequency 27MHzCompression format MPEG 2Audio recording formatSampling frequency 48kHzCompression format Dolby DigitalVCR SpecificationsHead system Four head helical scan azimuth systemTimer 12-hour display type with AM, PMTape speed SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/secTape width 12.7 mmRewind time About 65 seconds (T-120)Antenna 75 ohms (VHF/UHF)VHF output signal Channel 3 or 4 (Switchable)Channel coverage VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)Frequency range 20Hz to 20kHzSignal-to-noise ratio 43dBDynamic range 88 dBChannel separation 60 dB DVD SpecificationsLaser system Semiconductor laser, wavelength 650 nmFrequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHzSignal-to-noise ratio More than 95dB Harmonic distortion Less than 0.008%Dynamic range More than 90 dBInputsANTENNA IN Antenna or CATV input, 75 ohmsVIDEO IN (AV1,2) 1.0 Vp-p 75 ohms, sync negative, RCA jack x 2AUDIO IN (AV1,2) -6 dBm more than 47 kohms, RCA jack (L, R) x 2 DV IN 4 pin (i.LINK/IEEE 1394 standard)

Specifications (Continued)58OutputsVIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1(C) 0.286 V (p-p) 75 ΩCOMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1(PROGRESSIVE SCAN) (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2Audio output (digital audio) 0.5 V (p-p), 75 Ω, RCA jack x 1Audio output (optical audio) Optical connector x 1Audio output (analog audio) 1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2RF OUT Channel 3 or 4 (Switchable)Accessory: Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Audio cable . . . . . . . . . . . . . . . . . . . . .1RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . . .1 Remote control . . . . . . . . . . . . . . . . . .1Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Design and specifications are subject to change without notice.Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of DolbyLaboratories.DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.

This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material orworkmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-chaser of the product and effective only when used in the United States, excluding U.S. Territories.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIEDWARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGESOF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOSTREVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASEDIN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warrantygives you specific legal rights and you may also have other rights that may vary from state to state.THIS LIMITED WARRANTY DOES NOT APPLY TO:•Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,maintenance or failure to maintain, or separate system components; and•Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outsideenvironmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current orvoltage, reception problem caused by inadequate home antenna or faulty antenna connections, computersoftware, institutional or commercial use, or other causes not arising out of defect in material or workmanship.Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.CUSTOMER INTER-ACTIVE CENTER NUMBERS:WARRANTY PERIOD:LABOR: 90 days from the Date of Purchase.PARTS: One Year from the Date of Purchase.*Parts replaced are warranted for the remaining portionof the original warranty period.HOW SERVICE IS HANDLED:Call 1-800-243-0000 for instructions on getting the defective unit repaired or replaced.Please retain dated sales receipt and your box toreturn the unit to LG for repair or replacement.Shipping both ways will be paid by LG during theWarranty Period. After the Warranty Period, you payinbound shipping charges and LG pays return shippingcharges.Visit our website at: http://www.lgservice.comFor nearest Authorized Service Center, Where to buy,Product Assistance, or Customer AssistanceCall 1-800-243-0000 (24 hours a day, 365 days per year)and select appropriate options from the menu.Or visit our website at http://www.lgservice.comLG Electronics, Inc.VCR/DVD Recorder -LGXBR446Limited Warranty - USALG ELECTRONICS U.S.A., INC.1000 SYLVAN AVENUEENGLEWOOD CLIFFS, NJP/N : 3835RV0002GIssue OPrinted in Korea