LG Electronics USA DU62SX40D 62" DLP PROJECTION TV User Manual User s Manual H

LG Electronics USA 62" DLP PROJECTION TV User s Manual H

USERS MANUAL

EUT Type: 62” DLP Projection TV FCC ID: BEJDU62SX40D Test Report No.: GETEC-E3-05-023 FCC Class B Certification APPENDIX H : USER’S MANUAL
DLP Projection TVOWNER’S MANUALMODEL: DU-52SX40D/52SX4D-UBDU-62SX40D/62SX4D-UBLG Electronics U.S.A., Inc.TMRTruSurround XTPlease read this manual carefully and completely beforeoperating your TV. Retain this manual for future reference.Record model number and serial number of the TV in thespaces provided below. See the label attached on the back cover and relate thisinformation to your dealer if you require service.Model Number : Serial Number :
DLP Projection TVWARNING/CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user tothe presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance (servicing) instructions in the literature accompanying the appli-ance.WARNING/CAUTION:TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.POWER CORD POLARIZATION:CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLYINSERT.ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGEDE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.NOTE TO CABLE/TV INSTALLER:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies thatthe cable ground shall be connected to the grounding system of the building, as close to the point of thecable entry as practical.REGULATORY INFORMATION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.CAUTION:Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized mod-ification could void the user’s authority to operate this product.COMPLIANCE:The responsible party for this product’s compliance is:LG Electronics U.S.A., Inc1000 Sylvan Avenue, Englewood Cliffs, NJ 076321-201-816-2000http://www.lgusa.comWARNINGRISK OF ELECTRIC SHOCK DO NOT OPEN/CAUTIONWWarning/Cautionarning/CautionWarning/Caution
Owner’s Manual WarningTV Guide On Screen Notices for U.S.A.TV Guide On Screen Notices for U.S.A.In the United States, the TV GUIDE and other related marks are registered marks of Gemstar-TV Guide International, Inc.and/or one of its affiliates. In Canada, TV GUIDE is a registered mark of Transcontinental Inc., and is used under license byGemstar-TV Guide International, Inc.The TV Guide On Screen system is protected by one or more of the following issued United States patents 6,498,895,6,418,556, 6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578; 4,706,121.The TV Guide On Screen system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of itsaffiliates.Digital Cable CompatibilityDigital Cable CompatibilityThis digital television is capable of receiving basic analog, digital basic and digital premium cable television programming bydirect connection to a cable system providing such programming. A security card provided by your cable operator is requiredto view encrypted digital programming. Certain advanced interactive digital cable services such as video-on-demand, cableoperator enhanced program guide, and data enhanced television service may require the use of a set top box. For moreinformation contact your local cable operator.Use of the CableCARDTM TradeMark.“CableCARDTM is a trademark of Cable Television Laboratories, Inc.”
DLP Projection TVSafety InstructionsIMPORTANT SAFETY INSTRUCTIONSImportant safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet orsheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara-tus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. Theimportant safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be includ-ed where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by addingstatements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illus-trates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction : 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-fiers)that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades withone wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or thethird prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and thepoint where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Safety InstructionsSafety InstructionsPORTABLE CART WARNING
Owner’s Manual Safety Instructions13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damagedin any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.15. CAUTION concerning the Power Cord :Most appliances recommend they be placed upon a dedicated circuit; thatis, a single outlet circuit which powers only that appliance and has noadditional outlets or branch circuits. Check the specification page ofthis owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damagedwall outlets, extension cords, frayed power cords, or damaged orcracked wire insulation are dangerous. Any of these conditions couldresult in electric shock or fire. Periodically examine the cord of yourappliance, and if its appearance indicates damage or deterioration,unplug it, discontinue use of the appliance, and have the cord replacedwith an exact replacement part by an authorized servicer.Protect the power cord from physical or mechanical abuse, such as beingtwisted, kinked, pinched, closed in a door, or walked upon. Payparticular attention to plugs, wall outlets, and the point where thecord exits the appliance.16. Outdoor Use Marking :WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.17. Wet Location Marking :Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shallbe placed on the apparatus.Safety Instructions continuedSafety Instructions continued
Owner’s Manual IntroductionIntroductionIntroductionPOWER TV GUIDE VOL CHENTERMENUPOWER Button VOLUME (F,G) ButtonsCHANNEL (E, D) Buttons Operation Indicator/Lamp Indicator/Temperature IndicatorENTER ButtonTV GUIDE ButtonOff Power Cord is not connected.Red Power Cord is connected, TV is in standby mode.Green TV turns on.Red (flashing) Power Cord is connected, TV is in booting sequence.Orange (flashing) Preparing operation in standby mode.Orange Projection lamp is reaching the end of its life and needs to be replaced with a new lamp. Contact your service center.Red (flashing) There is a problem with the lamp or around it. Contact anauthorized service center.Green (flashing) The lamp cover is not closed.Orange The projection TV is overheating. Check the blocked vents of the Projection TV and the accumulated dust in the dust filter.Red The projection TV shuts down due to overheating.Red (flashing) The projection TV shuts down, check the cooling fan. Contact your service center.Operation IndicatorLamp IndicatorTemperature Indicator- Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal theoperating status of the DLP projection TV.Function Status IndicatorsFunction Status IndicatorsMemory CardSlotsMENU ButtonControlsControlsFront Panel ControlsFront Panel Controls
DLP Projection TVIntroductionPC/DTV(XGA/480p/720p1080i)DVIRGB/DVI UPGRADE PORT/PR PBYDTV/DVDRGBPC/DTV(XGA/480p/720p1080i)PC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD HDMI1/DVI VARIABLEAUDIO OUTG-LINK HDMI2UPGRADEPORTANTENNA InputsConnect antenna sig-nals to the TV directly.DIGITAL AUDIO OPTICALOUTPUTUsed to connect either an exter-nal amplifier, or add a sub-woofer to your surround soundsystem if it has a digital audio optical input.(Refer to )MONITOR OUTPUTConnect a second TV orMonitor.S-VIDEO InA connection availablewith some high-endequipment that provideseven better picture qual-ity for Video 2.RGB/DVI INPUTConnect the monitoroutput connector froma PC to the appropri-ate input port.RGB InputConnect the TV outputconnector from a PC/DTVto the appropriate inputport.AUDIO CENTERMODE INConnect to externalDolby Digital Center“preamp output.”VARIABLE AUDIO OUTUsed to connect eitheran external amplifier,or add a sub-woofer toyour surround soundsystem.COMPONENT INPUT 1-2Connect a componentvideo/audio device tothese jacks. Refer to yourDVD manual for furtherinformation.VIDEO 1 or 2Connects the video sig-nals from various typesof equipment.Left/Right AUDIOUsed for stereo soundfrom various types ofequipment.IEEE1394Connect DVHS orMicroMV to IEEE1394Connector.CableCARD™Used for CableCARD™received Cable ServiceProvider.CABLE InputsConnect cable signals tothe TV, either directly orthrough your cable box.G-LINKConnect a G-LINK Cable tothis jack.DIGITAL AUDIO OPTI-CAL INPUT1(COMPO-NENT2)Connect digital audiofrom the equipmentwhose video is connect-ed to COMPONENT 2. DIGITAL AUDIO OPTI-CAL INPUT2(DVI)Connect digital audiofrom the equipmentwhose video is connect-ed toHDMI/DVI(VIDEO).(Refer to )Notes: In standby mode, these port will not work.If the video is connected through HDMI-TO-HDMI cable, you don’t need to connect digital audio. This portis used only when the video connected through DVI-TO-HDMI cable.1212HDMI1/DVI, HDMI 2Connect a HDMI signalto HDMI1/DVI orHDMI2. Or connect aDVI(Video) signal toHDMI1/DVI.Back Connection PanelBack Connection PanelConnection OptionsConnection Options
Owner’s Manual IntroductionLEFT/RIGHTAUDIOUsed for stereosound from vari-ous types ofequipment. S-VIDEOA connectionavailable on somevery high-endequipment thatprovides betterpicture qualitythan video input.VIDEOConnects thevideo signalsfrom any piece ofequipment. Front A/V PanelS-VIDEOVIDEOFRONT A/VAUDIO(R)(L)/MONOThere are four jacks on the left side on your projection TVthat make connecting Audio/Video devices like video gamesand camcorders very simple. The jacks are like those found on the back jack connectionpanel. This means that most equipment that connects tothose types of jacks on the rear jackpack, may be connect-ed to the front connection panel.To use the side jacks as the signal source, select themusing Main Input menu as described on page 58. They willbe named “Front Video” in the Main Input menu.If you input both Front Video andS-Video, only the S-Video willwork.If you’re connecting a video gamedevice, make sure to change the picture settings with the EZPicture option in the Video menu(see page 59).Mini glossary A/V CABLESAudio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables areused for stereo playback of videocassettes and for higher quality picture and sound from other A/V devices.A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).Front Connection PanelFront Connection Panel
DLP Projection TVInstallation- Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections- For optimum picture quality, adjust antenna direction if needed.Antenna or Cable ConnectionAntenna or Cable Connection1. Analog and Digital TV signals provided on antenna2. Analog and Digital TV signals provided on cableANTENNAMulti-family Dwellings/Apartments(Connect to wall antenna socket)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)OutdoorAntennaWall AntennaSocketVHF AntennaUHF AntennaRF Coaxial Wire (75 ohm)Bronze WireTurn clockwise to tighten.Bronze WireBe careful not to bend the bronze wire whenconnecting the antenna.Bronze WireCable TV WallJack RF Coaxial Wire (75 ohm)CABLEInstallationInstallationExternal Equipment ConnectionsExternal Equipment ConnectionsTurn clockwise to tighten.
Owner’s Manual Note: The TV will let you know when the TV(analog antenna), DTV(digital antenna), CATV(analog cable) and CADTV(digitalcable) channel scans are complete.•In a poor signal area to improve picture quality, purchaseand install a signal amplifier.•If the antenna or cable needs to be split for two TV’s,install a “2-Way Signal Splitter” in the connections.•If the antenna or cable is not installed properly, contactyour dealer for assistance.ANTENNASignalAmplifier3. Analog and Digital TV signals provided on cable and antennaAntennaRF Coaxial Wire (75 ohm)Bronze WireTurn clockwise to tighten.Cable TV WallJack RF Coaxial Wire (75 ohm)CABLEANTENNAConnection Option 1Set VCR output switch to channel 3 or 4 and then tune theTV to the same channel number.Connection Option 21. Connect the audio and video cables from the VCR's outputjacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors(Video = yellow, Audio Left = white, and Audio Right = red).If you connect an S-VIDEO output from VCR to the S-VIDEOinput, the picture quality is improved; compared to connectinga regular VCR to the Video input.2. Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.) 3. Select the input source with using the TV/VIDEO button onthe remote control. Note that this TV finds the connectedinput sources automatically for Video, Front Video andComponent 1-2. It is presumed that RGB, HDMI1/DVI andHDMI2 sources are connected.Do not connect to both Video and S-Video at thesame time. In the event that you connect both Videoand the S-Video cables, only the S-Video will work.)VCR SetupVCR SetupPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEO OUTIN(R) AUDIO (L)VIDEO34OUTPUTSWITCHANT OUTANT INVCR Rear12InstallationBronze Wire
DLP Projection TVInstallation•Component Input portsTo get better picture quality, connect a DVD player to thecomponent input ports as shown below.Component ports on the TV Y PBPRVideo output ports on DVD playerYYYYPbB-YCbPBPrR-YCrPRHow to connect1. Connect the DVD video outputs (Y, PB, PR) to the COMPO-NENT (Y, PB, PR) INPUT jacks on the TV and connect theDVD audio outputs to the AUDIO INPUT jacks on the TV, asshown in the figure.2. If your DVD only has an S-Video output jack, connect this tothe S-VIDEO input on the TV and connect the DVD audio out-puts to the AUDIO INPUT jacks on the TV, as shown in the fig-ure.Note: If your DVD player does not have component video output,use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/VIDEO button on the remote control to selectComponent 1 or Component 2. (If connected to S-VIDEO,select the Video or Front Video external input source.)3. Refer to the DVD player's manual for operating instructions.DVD SetupDVD SetupPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORT(R) AUDIO (L)S-VIDEOBR(R) AUDIO (L) DIGITAL AUDIOOPTICALDVDNotes:• Digital Audio will not work for Component 1 input source.• Digital Audio operation has priority if Digital Audio and AUDIO L/Rare connected at the same time.orHow to connectConnect the audio and video cables from the external equip-ment's output jacks to the TV input jacks, as shown in thefigure. When connecting the TV to external equipment, match thejack colors (Video = yellow, Audio Left = white, and AudioRight = red).How to use1. Select the input source with using the TV/VIDEO button onthe remote control. Note that this TV finds the connectedinput sources automatically for Video 1-2 and Component 1-2. It is presumed that RGB, HDMI1/DVI and HDMI2 sourcesare connected.2. Operate the corresponding external equipment. For connec-tion instructions for operating the TV Guide On Screen sys-tem, see page 21.External External A/V Source SetupA/V Source SetupPC/DTV(XGA/480p/720p/1080i)S-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1RLAUDIO VIDEOVARIABLEAUDIO OUTUPGRADEPORTCamcorderVideo GameSet
Owner’s Manual InstallationThe TV has a special signal output capability which allows you tohook up a second TV or monitor.Connect the second TV or monitor to the TV’s MONITOR OUTPUT.See the Operating Manual of the second TV or monitor for furtherdetails regarding that device’s input settings.Note• Component, RGB-PC/RGB-DTV, HDMI1/DVI,HDMI2, DTV inputsources cannot be used for Monitor out.Monitor Out SetupMonitor Out SetupS-VIDEO IN(R) AUDIO (L) VIDEOPC/DTV(XGA/480p/720p/1080i)S-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1VARIABLEAUDIO OUTUPGRADEHow to connectUse the TV’s COMPONENT (Y, PB, PR) INPUT, RGB, HDMI1/DVI or HDMI2jack for video connections, depending on your set-top box connector. Then,make the corresponding audio connections.Note: HDMI(High Definition Multimedia Interface): Input that accepts uncom-pressed digital signal and multi channel digital audio signal.How to use1. Turn on the digital set-top box. (Refer to the owner’s manual for the digitalset-top box.) 2. Use TV/VIDEO on the remote control to select Component 1, Component2, RGB-DTV, or HDMI/DVI source.HDSTB SetupHDSTB Setup- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digitalsignals from a digital set-top box or other digital external device, refer to the figure as shown below.- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).Signal480i480p720p1080iComponent 1/2YesYesYesYesRGB-DTV,HDMI/DVINoYesYesYesCableCARDCableCARDTMTM SetupSetupDIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)DIGITAL AUDIO OPTICAL OUTPUTCableCARDG-LINKHow to useInsert the CableCARDTMTM received from the cable service provider to theCableCARDTMTM slot of TV back panel. If the pairing information about this TV and the CableCARD is automaticallydisplayed on the screen, contact with the cable service provider by phone.Note :• CableCARDTMTM have the types of Motorola, Scientific Atlanta, SCM etc..These 3 types of CableCARDTMTM can be used for this PLASMA TV.Caution: When removing the CableCARDTMTM, do notdrop it as this may cause impact to theCableCARDTMTM.
DLP Projection TVInstallationSend the TV’s audio to external audio equipment (stereo system) viathe Digital Audio Output (Optical) port.How to connect1. Connect one end of an optical cable to the TV Digital Audio(Optical) Output port.2. Connect the other end of the optical cable to the digital audio (opti-cal) input on the audio equipment.3. Set the “ TV Speaker option - Off”in the AUDIO menu. Refer topage 65.See the external audio equipment instruction manual for operation.Caution: Do not look into the optical output port. Lookingat the laser beam may damage your vision.Digital Digital Audio OutputAudio OutputPR PBYCABLECOMPONENTINPUT2 INPUT1DTV/DVD INPUT(L)(R)AUDIOANTENNADIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTCABLECARD DVI G-LINK HDMIHow to connect1. Connect the Dolby Digital Output jacks from the TV to the input jackson the Dolby Digital Receiver.2. Set up your Dolby Digital Receiver according to the directions provid-ed with that device. 3. If you wish to use your TV as the “Center channel” for your hometheater, re-direct the center channel to Center speaker mode inputjack on the TV.Set the TV Speaker option to - “Center ” on the AUDIO menu. Refer topage 60.Dolby Digital Dolby Digital Audio ConnectionAudio ConnectionDolby Digital A/V ReceiverCenter ChannelPreampOutFront LeftFront RightRear LeftSurroundRear RightSurroundPoweredSubwooferPC/DTV(XGA/480p/720p/1080i)S-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1VARIABLEAUDIO OUTUPGRADEHook up Variable Audio Output, L-Audio-R to Amplifier system forLeft/Right front speaker sound.How to connect1. Locate the Variable Audio Out jacks on the back of your TV and theInput jacks on the back of your stereo's amplifier.2. Connect the two jacks, making sure that the right and left channelsare connected correctly.3. Set up your speakers through your analog stereo amplifier, accord-ing to the instructions provided with the amplifier.External StereoExternal StereoPC/DTV(XGA/480p/720p/1080i)S-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1VARIABLEAUDIO OUTUPGRADE
Owner’s Manual Installation<When the PC supports DVI>How to connect1. Connect the PC to HDMI1/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product).If you do not need to connect audio, HDMI2 port is also available for the DVI video connection.2. If the PC(or the sound card of the PC) has a fiber optic digital audio output connector, connect the PC's audio output to DIGI-TAL AUDIO(OPTICAL) port for DVI INPUT.3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUTport located on the right side of RGB INPUT port.How To Use1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz.2. Select HDMI1/DVI input source in main input option of SETUP menu.(Refer to P.58)TV/VIDEO button is also available for this purpose.3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PCmode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust thebrightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not bechanged, change the PC graphic card or consult the manufacturer of the PC graphic card.<When the PC supports RGB>How to connect1. Connect the PC to RGB INPUT port of this TV with a RGB cable(not supplied with this product).2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUTport located on the right side of RGB INPUT port.How To Use1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60 Hz.2. Select RGB-PC input source in main input option of SETUP menu.(Refer to P.58)Once you select RGB-PC in main input option of SETUP menu, TV/VIDEO button is also available for this purpose.3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PCmode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust thebrightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not bechanged, change the PC graphic card or consult the manufacturer of the PC graphic card.PC SetupPC Setup- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphiccard accordingly.720x400800x60070.0885.0359.9472.8075.0085.0035.15637.87948.07746.87553.67448.36356.47660.02356.2560.3172.1875.0085.0660.0070.0675.02VerticalFrequency(Hz) Resolution HorizontalFrequency(KHz)VerticalFrequency(Hz)1024x768Resolution640x480HorizontalFrequency(KHz)31.46937.92731.46937.86137.50043.269Monitor Display Specifications (RGB-PC )Resolution640x480800x600HorizontalFrequency(KHz)31.46937.86137.50035.15637.87948.07746.87559.9472.8075.0056.2560.3172.1875.0048.36356.47660.02360.0070.0675.02VerticalFrequency(Hz) Resolution HorizontalFrequency(KHz)VerticalFrequency(Hz)1024x768Monitor Display Specifications (HDMI/DVI Mode)
DLP Projection TVInstallation- HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."- This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI).- This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolu-tion.- When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the outputresolution of the source device will be automatically set to 1280x720p.- If the source device does not support Auto HDMI/DVI, you need to set the output resolution appropriately.To get the best picture quality, adjust the DVD Player or Set Top Box's output resolution to 1280x720p, and the PC graphics card'soutput resolution to 1024x768, 60Hz.- If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connection includesboth video and audio.- If the source device has a DVI output and no HDMI output, a separated audio connection is necessary.<When the source device(DVD player or Set Top Box) supports HDMI>How To Connect1. Connect the source device to HDMI1/DVI or HDMI2 port of this TV with an HDMI cable(not supplied with this product).2. No separated audio connection is necessary.How To Use- If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.- If the source device does not support Auto HDMI, you need to set the output resolution appropriately.To get the best picture quality, adjust the output resolution of the source device to 1280x720p.- Select HDMI1/DVI or HDMI2 input source in main input option of SETUP menu.(Refer to P.58)TV/VIDEO button is also available for this purpose.<When the source device(DVD player or Set Top Box) supports DVI>How To Connect1. Connect the source device to HDMI1/DVI port of this TV with a HDMI-to-DVI cable(not supplied with this product).Do not use HDMI2 port for DVI connection if you want to connect audio.2. A separated audio connection is necessary.3. If the source device has a fiber optic digital audio output, connect the audio output to DIGITAL AUDIO(OPTICAL) port for DVIINPUT.4. If the source device has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on theright side of RGB INPUT port.How To Use- If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.- If the source device does not support Auto DVI, you need to set the output resolution appropriately.To get the best picture quality, adjust the output resolution of the source device to 1280x720p.- Select HDMI1/DVI input source in main input option of SETUP menu.(Refer to P.58)TV/VIDEO button is also available for this purpose.HDMIHDMI
Owner’s Manual InstallationCable sampleHDMI Cable (not supplied with the product)HDMI to DVI Cable (not supplied with the product)Fiber Optic Digital Audio Cable(not supplied with the product)Analog Audio Cable(RCA type)(not supplied with the product)Analog Audio Cable(Stereo to RCA type)(not supplied with the product)ReferenceReference
DLP Projection TVHDMIHow to use1. Connect the HDMI1/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET.2. Turn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control.3. Select HDM1/DVI Input source in Main Input option of SETUP menu.(Refer to P.58)4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness inHDMI1/DVI Source Devices. If noise is present, change the HDMI1/DVI Source Devices to another resolution, change therefresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphicscard can not changed, change the PC graphics card or consult the manufacturer of the PC graphics card.Notes:- Depending on the graphics card, DOS mode may not work if you use a HDMI1 to DVI Cable.- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprint-ed on the screen. Use the Orbiter screen saver when possible.- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit toScreen. As shown the lower picture, press the ADJUST button to adjust the screen Position of TV SET and contact an PCgraphics card service center.- When Source Devices connected HDMI1/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI1/DVI Source Devices or contact your service center.- In case HDMI1/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI1/DVIInput. And In case of, Video Resolution not supported TV SET output in HDMI1/DVI Source Devices, "INVALID FORMAT" OSDdisplay. Refer to the Manual of HDMI1/DVI Source Devices or contact your service center.In This Mode, the Supported TV Set Resolution Specification- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9- 1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)- 720 x 480 P @ 59.94Hz / 60Hz, 16:9- 720 x 480 P @ 59.94Hz / 60Hz, 4:3In This Mode, the Supported PC Resolution Specification- 640 x 350 @ 70Hz- 640 x 480 @ 60Hz- 640 x 480 @ 72Hz- 640 x 480 @ 75Hz- 800 x 600 @ 56Hz- 800 x 600 @ 60Hz- 800 x 600 @ 72Hz- 800 x 600 @ 75Hz- 1024 x 768 @ 60Hz(preferred format)- 1024 x 768 @ 70Hz- 1024 x 768 @ 75HzClosePOSITION GSIZEPHASERESETAdjustDFGE
Owner’s Manual InstallationPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT INANT OUTPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT INANT OUTVCR RearVCR FrontVCR RearVCR FrontTV Guide On Screen SetupTV Guide On Screen Setup- The TV Guide On Screen system uses Setup information to provide you with show listings and lineups in your area—which areupdated several times a day. - Once you set up the TV according to manufacturer’s instructions, you are ready to set up the TV Guide On Screen system.Note:The TV Guide On Screen system interactive program guide provides listings for cable-ready, cable box, and digital cableservices as well as over-the-air broadcast. It does not provide listings for satellite services.How to connect VCR and Cable Box1.Antenna Service1.Antenna Service2. Cable Service without a Cable Box2. Cable Service without a Cable Box
DLP Projection TVInstallationPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEOOUTIN(R) AUDIO (L) VIDEORFTVVCRCable (R) AUDIO (L) VIDEO34OUTPUTSWITCH34OUTPUTSWITCHANT INANT OUTPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT INANT OUTPC/DTV(XGA/480p/720p/1080i)S-VIDEOPR PBYMONOCABLERGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOAUDIOCENTERMODE INMONITOROUTPUTVIDEOINPUT2VIDEOINPUT1DIGITAL AUDIOOPTICAL INPUT1(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT2(DVI)IEEE1394DIGITAL AUDIO OPTICAL OUTPUTANTENNACABLECARD DVI VARIABLEAUDIO OUTG-LINK HDMIUPGRADEPORTS-VIDEOOUTIN(R) AUDIO (L) VIDEORFTVVCRCable (R) AUDIO (L) VIDEO34OUTPUTSWITCH34OUTPUTSWITCHANT INANT OUTCable Box RearorVCR RearVCR FrontCable Box FrontVCR RearVCR FrontCable Box RearVCR RearVCR FrontCable Box Frontor3.Cable Service without a Cable Box3.Cable Service without a Cable Box4. Antenna and Cable Service without a Cable Box5. 5. Antenna and Cable Service with a Cable BoxAntenna and Cable Service with a Cable Box
Owner’s Manual InstallationNote: The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 20~21 for G-LINK connection instructions.The TV Guide On Screen system's Reminder Screen appears:-- after initial TV set up-- if you power Off the TV and then power it back OnTo make a selection, use the D/ Ebutton to highlight to an option, and press ENTER.• "Set up TV Guide On Screen now," displays the Welcome Screen.Press ENTER to begin Setup.• "Remind me to set up later" returns you to watching TV.• "Don't remind me again" returns you to watching TV and stops thereminder screen from appearing upon power On.How to use1. Screen 1: Country• This screen asks you the location of your TV.• Use the D/ Ebutton to highlight a country.• Press ENTER to display Screen 2.The TV Guide On Screen system's Welcome Screen appears:-- by pressing the TV Guide key-- when you power On your TV if you previously skipped "Set up TV Guide On Screen now" on the Reminder Screen.The Welcome Screen highlights features of the TV Guide On Screensystem.Press ENTER to begin Setup.2.Reminder Screen1.Welcome ScreenTV Guide On Screen SetupTV Guide On Screen Setup
DLP Projection TVInstallation4. Screen 2: Enter Zip or Postal CodeOption 1•If you selected USA in Screen 1, you see the ZIP Code screen.•You input numbers by either pressing the number keys on the remoteor using the D/ Ebuttons to display a number, and then the F / G but-tons to move to another field.•Press ENTER to display Screen 3.Option 2•If you selected Canada in Screen 1, you see the Postal Code screen.•You input characters by using the D/ Ebuttons, and then the F / Gbuttons to move to another field.•Press ENTER to display Screen 3.5. Screen 3: Do you have Cable?•If you select Yes, you see Screen 4.•If you select No, you see Screen 12.6. Screen 4: Do you have a Cable Box?•If you select Yes, you see Screen 5.•If you select No, you see Screen 12.
Owner’s Manual Installation8. Screen 6: Cable Box Tuning Channel•Select the channel used for the cable box.•Press ENTER to display Screen 7.9. Screen 7: Cable Box Configuration Diagram•The diagram shows the correct way to install the G-LINK Cable fromthe back of the device to the cable box. Make sure the G-LINK Cable is properly installed.•Press ENTER to display Screen 8.7. Screen 5: Which TV input is the cable box plugged into?•If you select Cable, you see Screen 6.•If you make any other choice, you see Screen 7 .
DLP Projection TVInstallation10. Screen 8: Cable Box Brand Name•Use the D/ Ebuttons to select a cable box brand.•Press ENTER to display Screen 9.11. Screen 9: Cable Box PreparationFollow the on-screen instructions, and press ENTER to displayScreen 10.12. Screen 10: Cable Box Code TestingWhen testing is done, Screen 11 displays automatically.13. Screen 11: Cable Box Tuned to Channel 9?If you select Yes, you see Screen 12.If you select No, a different code is tested in Screen 10.Notes: Many Cable Boxes require testing more than one code.If you select Test this code again, the same code is tested againin Screen 10.
Owner’s Manual Installation16. Screen 14: Congratulations•Press ENTER to display Screen 15.15. Screen 13: Are your basic settings correct?•If you select Yes, you see Screen 14.•If you select No, you see Screen 1.14. Screen 12: Do you have an antenna connected?•If you select Yes, you see Screen 13.Note: If you selected No in Screen 3 then you must select Yes in this screen to receive a channel lineup and listings.•If you select No, you see Screen 13.
DLP Projection TVInstallation19. Screen 17: VCR Brand Name•Use the D/ Ebuttons to select the brand of the recording device.•Press ENTER, and you see Screen 18.18. Screen 16: VCR Configuration Diagram•This screen shows the correct way to install the G-LINK Cable fromthe back of the TV to the Recording device. Make sure the G-LINK Cable is properly installed.•Press ENTER, and you see Screen 17.17. Screen 15: Is a VCR Connected?•If you select Yes, you see Screen 16.•If you select No, you see Screen 21.
Owner’s Manual 9Installation20. Screen 18: VCR PreparationFollow the on-screen instructions, and press ENTER to display Screen19.21. Screen 19: VCR Code TestingWhen testing is done, Screen 20 displays automatically.22. Screen 20: VCR Tuned to Channel 9?•If you select Yes, you see Screen 21.•If you select No, a different code is tested in Screen 19.Note : Many VCRs require testing more than one code.•If you select Test this code again, the same code is tested again inScreen 19.
DLP Projection TVInstallation23 Screen 21: Confirming Your SettingsVerify the Setup information is correct.If it is, select Yes, end setup, and you see Screen 22.If it is not, select No, repeat setup process, and you see Screen 1.24. Screen 22: Congratulations•You have successfully completed Setup!•Press ENTER and you see Screen 23.25. Screen 23: Helpful Information•This screen tells you valuable information on using your Guide.•Press ENTER to watch TV.Notes: The TV Guide On Screen system receives program listings data through your cable or over-the-air video signal. In order toreceive regular program listings, please remember to do the following:1. Turn OFF your TV when it is not in use. (Do not unplug the power cord.)2. If you have a Cable box connected, leave it ON.3. If you have a VCR connected, turn it OFF when not in use. (Do not unplug the power cord.)4. If you have more than one Cable system in your area, you may be prompted to select which Cable system’s program data todownload. If so prompted, please follow the on-screen instructions.
Product SpecificationOwner’s Manual •The specifications shown above may be changed without prior notice for quality improvement.Product SpecificationsProduct SpecificationsMODELHorizontal Size (inches)Height (inches)Depth (inches)Weight (lbs.)Power requirementTelevision SystemProgram CoveragePower Consumption (W)AntennaAudio Output (W)Supplied AccessoriesAC120V, 60HzNTSC-M, ATSCVHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135. DTV 2 ~ 69250W75 ohm External Terminal for VHF/UHF20Wx2Remote control, 2 size AA batteries.DU-52SX40D/52SX4D-UB DU-62SX40D/62SX4D-UB63.440.419.5132.355.735.5 15.7 82.7

Navigation menu