LG Electronics USA E617G Cellular/PCS GSM/WCDMA Phone with WLAN, Bluetooth and RFID User Manual LG E617g Canada EN Cover indd

LG Electronics MobileComm USA, Inc. Cellular/PCS GSM/WCDMA Phone with WLAN, Bluetooth and RFID LG E617g Canada EN Cover indd

UserManual.wiki >

LG Electronics USA >

E617G User Manual

Users Manual

Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rulesand ICES-003 Class B digital apparatus requirements for Industry Canada.Operation is subject to the following two conditions:(1) This device & its accessories may not cause harmful interference.(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device was tested for typical use with the back of the phone kept 0.39 inches (1 cm) from the body. To comply with FCC/IC RF exposure requirements, a minimum separation distance of 0.39 inches (1 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used. Avoid the use of accessories that cannot maintain 0.39 inches (1 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC/IC RF exposure limits.

52Please check to see whether any problems you encountered with your phone are described in this section before taking the phone in for service or calling a service representative.1. Phone memory When there is less than 10% of space available in your phone memory, your phone cannot receive new messages. You need to check your phone memory and delete some data, such as applications or messages, to make more memory available.To uninstall applications:Touch > Apps tab > Settings > Apps from the DEVICE category.Once all applications appear, scroll to and select the application you want to uninstall.Touch Uninstall.1 2 3 Getting to know your phoneBefore you start using the phone, please read this! 2. Extby havYousysExtTuoRs••

532. Optimising battery lifeExtend your battery's life between charges by turning off features that you don't need to having running constantly in the background. You can monitor how applications and system resources consume battery power. Extending your phone's battery life:Turn off radio communications you are not using. If you are not using Wi-Fi, Bluetooth or GPS, turn them off.Reduce screen brightness and set a shorter screen timeout.••Turn off automatic syncing for Google Mail™, Calendar, Contacts and other applications.Some applications you have downloaded may reduce battery power.To check the battery power level:Touch > Apps tab > Settings > About phone from the SYSTEM > StatusThe battery status (charging or not charging) and level (percentage charged) is displayed at the top of the screen.•••

54To monitor and control how battery power is being used:Touch > Apps tab > Settings > Power Saver from the DEVICE > Battery use from the BATTERY INFORMATION.Battery usage time is displayed on the screen. It tells you how long it has been since you last connected your phone to a power source or, if currently connected, how long the phone was last running on battery power. The screen shows the applications or services using battery power, listed in order from the greatest to smallest amount used.•3. Using foldersYou can combine several app icons in a folder. Drop one app icon over another on a Home screen, and the two icons will be combined.NOTE: To see a smaller collection of frequently used apps, touch the Google Apps folder near the bottom of the screen. As with any folder, you can customize its contents.NuitbGetting to know your phone

55NOTE: After you open an app, you can usually adjust its settings by choosing items from its Menu icon near the top or bottom of the screen.4. Before installing an open source application and OS WARNINGIf you install and use an OS other than the one provided by the manufacturer it may cause your phone to malfunction. In addition, your phone will no longer be covered by the warranty.

58needed to ensure that idle applications don't consume resources unnecessarily.To return to view list recently used applications: Simply press and hold the Home key.To stop applications: Touch > Apps tab > Settings > Apps from the DEVICE > RUNNING tab.Scroll and touch the desired application and touch Stop to stop it.1 2 7. Installing PC Software (LG PC Suite)"LG PC Suite" PC Application is a program that helps you connect your device to a PC via a USB cable and Wi-Fi. Once connected, you can use the functions of your device from your PC.With your "LG PC Suite" PC Application, You Can...Manage and play your media contents (music, movie, pictures) on your PC.Send multimedia contents to your device.••SbBUBPoNthy•••••Getting to know your phone

59m C ed, n, e.Synchronises data (schedules, contacts, bookmarks) in your device and PC.Backup the applications in your device.Update the softwares in your device.Backup and restore the device.Play multimedia contents of your PC from other device.NOTE: You can use the Help menu from the application to find out how to use your "LG PC Suite" PC application.•••••Installing "LG PC Suite" PC Application"LG PC Suite" PC application can be downloaded from the webpage of LG.Go to www.lg.com and select a country of your choice.Go to Support > Mobile Phone Support > Select the Model (LG-E617g).Click PC Sync from Download, and click WINDOW PC Sync Download to download "LG PC Suite" PC software.1 2 3

60System Requirements for "LG PC Suite" PC softwareOS: Windows XP 32 bit(Service pack 2), Windows Vista 32 bit/64 bit, Windows 7 32 bit/64 bitCPU: 1 GHz or higher processors Memory: 512 MB or higher RAMsGraphic card: 1024 x 768 resolution, 32 bit color or higher••••HDD: 100 MB or more free hard disk space (More free hard disk space may be needed depending on the volume of data stored.)Required software: LG integrated driversNOTE: LG Integrated USB DriverLG integrated USB driver is required to connect an LG device and PC and installed automatically when you install "LG PC Suite" PC software.••8. DatsynPC ConsynTheA1 2 Getting to know your phone

61be a s8. Synchronising your phone to a ComputerData from your device and PC can be synchronised easily with "LG PC Suite" PC application for your convenience. Contacts, schedules, and bookmarks can be synchronised. The procedure is as follows:Connect your device to PC. (Use a USB cable or Wi-Fi connection.)After connection, run the program and select the device section from the category on the left side of the screen.1 2 Click [Personal information] to select.Select the checkbox of contents to synchronise and click the Sync button. 9. Synchronising your phone to a computer via USBNOTE: To synchronise your phone with your PC using the USB cable, you need to install LG PC Suite onto your PC. Please refer to previous pages to install LG PC Suite.3 4

62Touch > Apps tab > Settings > Storage from the DEVICE to check out the storage media. (If you want to transfer files from or to a memory card, insert a memory card into the phone.)Connect the phone to your PC using the USB cable.USB connection mode list will appear, and select Media sync (MTP) option.Open the removable memory folder on your PC. You can view the mass storage content on your PC and transfer the files.1 2 3 4 Copy the files from your PC to the drive folder.Select Charge only option to disconnect the phone. TIP! To use the microSD card on your phone again, you need to open the notification drawer and touch > Charge only.5 6 To comOpephoGetting to know your phone

63e t To disconnect your phone from the computer:Open the notification drawer and touch > Charge only to disconnect your phone from the computer safely.10. Hold your phone uprightHold your mobile phone vertically, as you would a regular phone. The LG-E617g has an internal antenna. Be careful not to scratch or damage the back of the phone, as this may affect performance.While making/receiving calls or sending/receiving data, avoid holding the lower part of the phone where the antenna is located. Doing so may affect call quality.

6411. When the screen freezesIf the screen freezes or the phone does not respond when you try to operate it:Remove the battery, reinsert it, then turn the phone on. ORPress and hold the Power/Lock key for 10 seconds to turn it off.If it still does not work, please contact the service centre.Getting to know your phoneDeEarProHomRetanyMe• C

65Device componentsEarpieceProximity sensorHome key Return to the Home screen from any screen.Menu key • Check what options are available.Power/Lock key• Switch your phone on/off by pressing and holding this key.• Short press to lock/unlock the screen.Back key Return to the previous screen.

66NOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch screen by sensing when the phone is near your ear. This extends battery life and prevents you from unintentionally activating the touch screen during calls. WARNINGPlacing a heavy object on the phone or sitting on it can damage the LCD and touch screen functions. Do not cover the LCD proximity sensor with protective film. This could cause the sensor to malfunction.Getting to know your phonePowChaMicEarVol• Invo• Dvo• Wvo

67e Power/Lock keyCharger/USB portMicrophoneEarphone JackVolume keys• In the Home screen: Control ringer volume.• During a call: Control your earpiece volume.• When playing a track: Control volume continuously.Battery coverFlashSIM card slotmicroSD Card slot SpeakerBatteryCamera lens

68Installing the SIM card and batteryBefore you can start exploring your new phone, you'll need to set it up. To insert the SIM card and battery:To remove the battery cover, hold the phone firmly in one hand. With your other hand, lift off the battery cover with your thumbnail as shown in figure.1 Getting to know your phone2

69Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards.2 Insert the battery into place by aligning the gold contacts on the phone and the battery (1) and pressing it down until it clicks into place (2).3

70Align the battery cover over the battery compartment (1) and press it down until it clicks into place (2).4 Charging your phoneThe charger connector is at the bottom of the phone. Insert the charger and plug it into an electrical outlet.Getting to know your phoneNinNdUsYouor m32Gspe

71nto NOTE: The battery must be fully charged initially to improve battery lifetime.NOTE: Do not open the battery cover during the charging of your phone.Using the memory cardYour phone supports the use of microSDTM or microSDHCTM memory cards of up to 32GB capacity. These memory cards are specifically designed for mobile phones and other ultra-small devices, and are ideal for storing media-rich files such as music, programs, videos, and photographs for use with your phone.To insert a memory card:Insert the memory card into the slot. Make sure the gold contact area is facing downwards.To remove the memory card safely: Touch > Apps tab > Settings > Storage from the DEVICE > Unmount SD card > OK.

72NOTE: Use only compatible memory cards with your phone. Using incompatible memory cards may damage the card and data stored on the card, as well as the phone. As the device uses FAT32 the Maximum size for any given file is 4 GB.••Getting to know your phoneDcmathTo Youformbef

73 WARNINGDo not insert or remove the memory card when the phone is on. Doing so may damage the memory card as well as your phone, and the data stored on the memory card may get corrupted.To format the memory card: Your memory card may already be formatted. If it isn't, you must format it before you can use it.NOTE: All files on your memory card are deleted when it is formatted.On the home screen, touch > Apps tab to open the menu.Scroll and touch Settings > Storage from the DEVICE.Touch Unmount SD card and touch OK to confirm it.Touch Erase SD card > Erase SD card > Erase everything, then confirm your choice.1 2 3 4

74If you have set a pattern lock, input the pattern lock then select Erase Everything.NOTE: If there is content on your memory card, the folder structure may be different after formatting as all the files will be deleted.5 Locking and unlocking the screenIf you do not use the phone for a while, the screen is turned off and locked automatically. This helps to prevent accidental touches and saves battery power.When you are not using the LG-E617g, press the Power/Lock key to lock your phone. Getting to know your phoneIf thset Locall avowebTo wLocappanyThe

75e ally. and ck If there are any programs running when you set lock screen, they may be still running in Lock mode. It is recommended that you exit all programs before entering Lock mode to avoid unnecessary charges (e.g. phone calls, web access and data communications).To wake up your phone, press the Power/Lock key . The lock screen will appear. Touch and slide the lock screen in any direction to unlock your home screen. The last screen you viewed will open.TIP! To wake up your phone, you can alternatively use the home key while the screen is turned off.Secure your lock screenYou can lock your screen so that only you can unlock it to access your phone. To set an Unlock Pattern, PIN or Password for the first time:Touch > Apps tab > Settings > Lock screen from the DEVICE.1

76Select Screen lock and desired options (None, Swipe, Pattern, PIN or Password).2 NOTE: Precautions to take when using pattern lock.It is very important to remember the unlock pattern you set. You will not be able to access your phone if you use an incorrect pattern 5 times. You have 5 opportunities to enter your unlock pattern, PIN or password. If you have used all 5 opportunities, you can try again after 30 seconds.Getting to know your phoneWhpatIf yothepatbutyouIf yoon perIf yyouto d

77When you cannot recall your unlock pattern:If you logged in to your Google account on the phone but failed to enter the correct pattern 5 times, tap the Forgot pattern button. You are then required to log in with your Google account to unlock your phone.If you have not created a Google account on the phone or you forgot it, you have to perform a hard reset.If you have forgotten PIN or Password: If you forgot your PIN or Password, you need to do Hard reset.

78Your Home screenTouch screen tipsHere are some tips on how to navigate around your phone.Touch – To choose a menu/option or open an application, touch it.Touch and hold – To open an options menu or grab an object you want to move, touch and hold it.Drag – To scroll through a list or move slowly, drag across the touch screen.Flick – To scroll through a list or move quickly, flick across the touch screen (drag quickly and release).NOTE:• To select an item, touch the centre of the icon.• Do not press too hard; the touch screen is sensitive enough to pick up a light, firm touch.• Use the tip of your finger to touch the option you want. Be careful not to touch any other keys.HoSimto vpanwaNdpOn keykey

79g Home screenSimply swipe your finger to the left or right to view the panels. You can customise each panel with Apps, Downloads, Widgets and wallpapers.NOTE: Some screen images may be different depending on your phone provider.On your Home screen, you can view quick keys at the bottom of the screen. Quick keys provide easy, one-touch access to the functions you use the most. Touch the Phone icon to bring up the touch screen dialpad to make a call. Touch the Messaging icon to access the messaging menu. This is where you can create a new message. Touch the Contacts icon to open your contacts. Touch the Apps icon at the bottom of the screen. You can then view all your installed applications. To open any application, simply touch the icon in the applications list.

80Customising the Home screenYou can customise your Home screen by adding Apps, Downloads, Widgets or Wallpapers. For more convenience using your phone, add your favourite widgets to the Home screen.To add items on your Home screen:Touch and hold the empty part of the Home screen.In the Add Mode menu, select items you want to add. You will then see added items on the Home screen.1 2 Drag it to the location you want and lift your finger.To remove an item from the Home screen:Home screen > touch and hold the icon you want to remove > drag it to .TIP! To add an application icon to the Home screen from the Applications menu, touch and hold the application you want to add.3 •Your Home screenReap1 2

81n Returning to recently-used applicationsTouch and hold the Home key. The screen displays a pop-up with icons of applications you used recently.Touch an icon to open the application. Or touch the Back key to return to your current application.1 2 Notification drawerThe notification drawer runs across the top of your screen.EditGPSBluetoothWi-FiSound

82Touch and slide the notification drawer down with your finger. Touch > to manage the Notifications. Here you can check and manage Sound, Wi-Fi, Bluetooth, Airplane mode, Accounts & sync, Auto-rotate screen, Brightness, Data enabled, GPS, NFC or Portable Wi-fi Hotspot.Viewing the status barThe status bar uses different icons to display phone information such as signal strength, new messages, battery life, active Bluetooth and data connections.Your Home screenIcBel

83lay , th Icon DescriptionNo SIM cardNo signalAirplane modeConnected to a Wi-Fi networkPower saver is onIcon DescriptionWired headsetCall in progressCall holdSpeakerphonePhone microphone is mutedBelow is a table explaining the meaning of icons you're likely to see in the status bar.

84Icon DescriptionMissed callBluetooth is onSystem warningAlarm is setNew voicemailRinger is silencedIcon DescriptionNFC is onVibrate modeBattery fully chargedBattery is chargingPhone is connected to PC via USB cableDownloading dataYour Home screenIc

85Icon DescriptionUploading dataGPS is acquiringReceiving location data from GPSData is syncingNew GmailNew Google Talk messageIcon DescriptionNew messageSong is playingFM radio turned on in the backgroundUSB tethering is activePortable Wi-Fi hotspot is activeBoth USB tethering and portable hotspot are active

86Onscreen keyboardYou can enter text using the onscreen keyboard. The onscreen keyboard appears automatically on the screen when you need to enter text. To manually display the keyboard, simply touch a text field where you want to enter text.Using the keypad & entering text Tap once to capitalise the next letter you type. Double-tap for all caps. Tap to switch to the numbers and symbols keyboard. You can also touch and hold this tab to view the Settings menu. Tap to enter a space. Tap to create a new line in the message field. Tap to delete the previous character. Tap to hide the onscreen keyboard.Your Home screenEnWhtextFreForthebiglanThe

87d ge Entering accented lettersWhen you select French or Spanish as the text entry language, you can enter special French or Spanish characters (e.g. "á").For example, to input "á", touch and hold the "a" key until the zoom-in key grows bigger and displays characters from different languages. Then select the special character you want.

88Google account set upWhen you first turn on your phone, you have the opportunity to activate the network, to sign into your Google Account and how you want to use some Google services. To set up your Google account: Sign into a Google Account from the prompted set up screen. OR Touch > Apps tab > select a Google application, such as Gmail > select New to create a new account. If you have a Google account, touch Existing, enter your email address and ••password, then touch Sign in.Once you have set up your Google account on your phone, your phone automatically synchronises with your Google account on the web.Your contacts, Gmail messages, Calendar events and other information from these applications and services on the web are synchronised with your phone. (This depends on your synchronisation settings.)After signing in, you can use Gmail™ and take advantage of Google services on your phone.CWiWitaccaccusinCoTo accSomsimor uyou

89nt nds r Connecting to Networks and DevicesWi-FiWith Wi-Fi, you can use high-speed Internet access within the coverage of the wireless access point (AP). Enjoy wireless Internet using Wi-Fi, without extra charges. Connecting to Wi-Fi networksTo use Wi-Fi on your phone, you need to access a wireless access point or "hotspot". Some access points are open and you can simply connect to them. Others are hidden or use security features; you must configure your phone to be able to connect to them.Turn off Wi-Fi when you're not using it to extend the life of your battery. NOTE: If you are out of the Wi-Fi zone or set Wi-Fi to OFF, additional charges may be applied by your mobile operator for mobile data use. Turning Wi-Fi on and connecting to a Wi-Fi networkTouch > Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKSSet Wi-Fi to ON to turn it on and start 1 2

90scanning for available Wi-Fi networks.Tap Wi-Fi menu again to see a list of active and in-range Wi-Fi networks.Secured networks are indicated by a lock icon.Touch a network to connect to it.If the network is open, you are asked to confirm that you want to connect to that network by touching Connect.If the network is secured, you are prompted to enter a password or other credentials. (Ask your network administrator for details)3 •4 ••The status bar displays icon that indicate Wi-Fi status.BluetoothYou can use Bluetooth to send data by running a corresponding application, not from the Bluetooth menu as on most other mobile phones.5 Connecting to Networks and DevicesN••

91te r NOTE: LG is not responsible for the loss, interception, or misuse of data sent or received via the Bluetooth wireless feature.Always ensure that you share and receive data with devices that are trusted and properly secured. If there are obstacles between the devices, the operating distance may be reduced.••Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your device. •Turning on Bluetooth and pairing up your phone with a Bluetooth deviceYou must pair your device with another device before you connect to it.Touch > Apps tab > Settings > Set Bluetooth to ON from the WIRELESS & NETWORKS1

92Tap Bluetooth menu again. Your phone will scan for and display the IDs of all available Bluetooth in-range devices. If the device you want to pair with isn’t on the list, make sure the target device is set to be discoverable, then tap SEARCH FOR DEVICES again.Choose the device you want to pair up with from the list.Once the paring is successful, your device will connect to the device. 2 3 Send data using the Bluetooth wireless featureSelect a file or item, such as a contact, calendar event, memo, or media file, from an appropriate application or Downloads.Select an option for sending data via Bluetooth.NOTE: The method for selecting an option may vary by data type. Search for and pair with a Bluetooth-enabled device.1 2 3 Connecting to Networks and DevicesShcoUSBgreconphosingtethdatdevporWhcon

93s om ds.Sharing your phone's data connectionUSB tethering and portable Wi-Fi hotspot are great features when there are no wireless connections available. You can share your phone's mobile data connection with a single computer via a USB cable (USB tethering). You can also share your phone's data connection with more than a single device at a time by turning your phone into a portable Wi-Fi hotspot.When your phone is sharing its data connection, an icon appears in the status bar and as an ongoing notification in the notifications drawer.For the latest information about tethering and portable hotspots, including supported operating systems and other details, visit http://www.android.com/tether.To change Portable Wi-Fi hotspot settings:Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Portable Wi-Fi hotspot > Choose options that you want to adjust.•

94TIP! If your computer is running Windows 7 or a recent distribution of some flavours of Linux (such as Ubuntu), you don't usually need to prepare your computer for tethering. But if you're running an earlier version of Windows or another operating system, you may need to prepare your computer to establish a network connection via USB. For the most current information about which operating systems support USB tethering and how to configure them, visit http://www.android.com/tether.To rename or secure your portable hotspotYou can change the name of your phone's Wi-Fi network name (SSID) and secure its Wi-Fi network.On the Home screen, touch > Apps tab > SettingsTouch More from the WIRELESS & NETWORKS and select Portable Wi-Fi hotspot.Ensure Portable Wi-Fi hotspot is ticked.1 2 3 Connecting to Networks and Devices4

95s ps ed.Touch Configure Wi-Fi hotspot.The Configure Wi-Fi hotspot dialog box will open.You can change the network SSID (name) that other computers see when scanning for Wi-Fi networks.You can also touch the Security menu to configure the network with Wi-Fi Protected Access 2 (WPA2) security using a pre-shared key (PSK).4 •••If you touch the WPA2 PSK security option, a password field is added to the Configure Wi-Fi hotspot dialog. If you enter a password, you will need to enter that password when you connect to the phone's hotspot with a computer or other device. You can set Open in the Security menu to remove security from your Wi-Fi network.Touch Save.•5

96ATTENTION!If you set the security option as Open, you cannot prevent unauthorised usage of online services by other people and additional charges can be incurred. To avoid unauthorised usage, you are advised to keep the security option active.Using the Wi-Fi CastYou can share your music, picture and video content between users who use Android Phones connected via the same Wi-Fi & Wi-Fi Directed network.Check your Wi-Fi & Wi-Fi Directed network in advance and make sure the users are connected to the same network.Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Wi-Fi Direct Touch the wi-fi direct checkbox to turn on.1 2 Connecting to Networks and DevicesEnthrWi-Fi Dareseledat3 4

97eo Wi-k KS Select a device to connect from the scanned device list.Touch Connect.Enabling Wi-Fi Direct to share through SmartShareWi-Fi Direct automatically scans nearby Wi-Fi Direct devices and the searched devices are listed as they are found and you can select a specific device to share multimedia data through Smart Share.3 4 NOTE: Wi-Fi Direct cannot be enabled while using other Wi-Fi functions.Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Wi-Fi DirectSelect a device to connect from the scanned device list.CREATE GROUP – Touch to activate group owner mode, which enables the legacy Wi-Fi devices to connect by scanning your phone. In this case you must enter the password 1 2

98that is set in Password.NOTE: When your phone becomes a group owner, it will consume more battery power than when it is a client. Wi-Fi Direct connection does not provide Internet service. Additional costs may be incurred when connecting and using online services. Check data charges with your network provider.Using SmartShareSmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content through a wireless network. Both devices must be DLNA certified to support this feature.To turn SmartShare on and allow sharing contentsTouch > Apps tab > SmartSharePress and select Settings.Touch Discoverable checkbox to turn off.1 2 3 Connecting to Networks and DevicesTwreTap••4 5

99tal ng ff.Touch Always accept request if you would like to automatically accept sharing requests from other devices.Touch Receive files if you would like to automatically allow upload files to my phone from other devices.Under the Sharing contents section, touch to checkmark the types of content you would like to share. Choose from Pictures, Videos and Music.SmartShare is now activated and ready to share contents.••4 5 To share contents from remote content library to other devicesLet your renderer device (e.g. TV) play multimedia contents from your remote content library (e.g. PC).NOTE: Make sure that the DLNA functionality of your devices is properly configured (e.g. TV and PC).Touch the top right button to or select the device from renderer lists.Touch the top left button and select the device of the remote content library.1 2

100You can browse the content library.Touch a content thumbnail or touch the Menu key and select Play button.To share contents from your phone to your renderer device(e.g. TV) NOTE: Make sure that your renderer device is properly configured.While browsing your pictures or videos using the Gallery application, touch to select files. Then you will be able to select multiple files to be shared.3 4 1 Touch Share on the menu and select the SmartShare.SmartShare is automatically launched with the selected files.Select the device from renderer lists to play the files.NOTE: Follow the similar steps to use the Music Player, Camera and Video player to share contents.2 3 4 Connecting to Networks and DevicesNotwithconDLNonlynotdevconTo con1 2

101he Notice: Check that your device is connected with your home network using Wi-Fi connection to use this application. Some DLNA enabled devices (e.g. TV) support only the DMP feature of DLNA and will not appear in the renderer device list. Your device might not be able to play some contents.To download contents from remote content libraryTouch > Apps tab > SmartShareTouch the top left button and select the device of the remote content library.1 2 You can browse the content library.Touch a content thumbnail then touch Download menu key.Notice: A few types of contents are not supported.To upload contents from my phone to remote content libraryNOTE: Mare sure that SD card is correctly mounted and the Receive files in settings menu is checked.3 4

102Touch > Apps tab > SmartShareTouch the top left button and select My phone.You can browse the content library.Touch and hold a content thumbnail and then touch the Upload menu key.Select a device of remote content library to be uploaded.Notice: Some DLNA enabled devices do not support DMS upload functionality and will not be uploaded. A few types of contents are not supported.1 2 3 4 5 CMaTc1 2 3 4 Connecting to Networks and Devices

103CallsMaking a callTouch to open the keypad.Enter the number using the keypad. To delete a digit, touch the .Touch to make a call.To end a call, touch the End icon .TIP! To enter "+" to make international calls, touch and hold .1 2 3 4 Calling your contactsTouch to open your contacts.Scroll through the contact list or enter the first few letters of the contact you want to call by touching Search contacts.In the list, touch the contact you want to call.Answering and rejecting a callWhen you receive a call in Lock state, hold and slide the to Answer incoming call.Hold and slide the to Decline an incoming call. 1 2 3

104Hold and slide the Quick msg icon from the bottom if you want to send one. TIP! Quick msgYou can send a message quickly using this function. This is useful if you need to reply the message during a meeting.Adjusting call volumeTo adjust the in-call volume during a call, use the Volume up and down keys on the left-hand side of the phone.Making a second callDuring your first call, touch Menu > Add call and dial the number. Also, you can go recent dialled list by touching or can search contacts by touching and select the number you want to call.Touch to make the call.Both calls are displayed on the call screen. Your initial call is locked and put on hold.Touch the displayed number to toggle between calls. Or touch Merge call to make a conference call.1 2 3 4 NyVieOn theViewand5 Calls

105u .ut l To end active calls, touch End or press Home Key and slide the notification bar down and select End call icon .NOTE: You are charged for each call you make.Viewing your call logsOn the Home screen, touch and choose the Call log tab .View a complete list of all dialled, received and missed voice calls.5 TIP! Touch any call log entry to view the date, time and duration of the call.TIP! Touch the Menu key, then touch Delete all to delete all the recorded items.Call settingsYou can configure phone call settings such as call forwarding and other special features offered by your carrier.

106On the Home screen, touch .Touch the Menu key.Tap Call settings and choose the options that you want to adjust.Fixed dialing numbers – To turn on and compile a list of numbers that can be called from your phone. You’ll need your PIN2, which is available from your operator. Only numbers within the fixed dial list can be called from your phone.Voicemail service – Allows you to select your carrier’s voicemail service.1 2 3 Voicemail settings – If you are using your carrier’s voicemail service, this option allows you to enter the phone number to use for listening to and managing your voicemail.Save unknown numbers – Add unknown numbers to contacts after a call.Call reject – Allows you to set the call reject function. Choose from Disabled, Reject calls on list or Reject all calls.Quick messages – When you want to reject a call, you can send a quick message using this function. This is useful if you need to reject a call during a meeting.Calall cno CalcallpasopeCalincandCalls

107ur ws n ect ect ng Call forwarding – Choose whether to divert all calls, when the line is busy, when there is no answer or when you have no signal.Call barring – Select when you would like calls to be barred. Enter the call barring password. Please check with your network operator about this service.Call duration – View the duration of calls including all calls, dialled calls, received calls and last call.Call costs – View the charges applied to your calls. (This service is network dependent; some operators do not support this function)Additional settings – This lets you change the following settings: Caller ID: Choose whether to display your number on an outgoing call. Call waiting: If call waiting is activated, the handset will notify you of an incoming call while you are on the phone (depending on your network provider).

108ContactsAdd contacts to your phone and synchronise them with the contacts in your Google account or other accounts that support contact syncing.Searching for a contactIn the Home screenTouch to open your contacts. Touch Search contacts and enter the contact name using the keyboard.1 2 Adding a new contactTouch , enter the new contact's number, then touch the Menu key. Touch Add to contacts > Create new contact. If you want to add a picture to the new contact, touch the image area. Choose from Take photo or Select from Gallery.Select the contact type by touching .Touch a category of contact information and enter the details about your contact.Touch Save.1 2 3 4 5 FaYouas Add1 2 3

109ch act. om .n ct.Favourite contactsYou can classify frequently called contacts as favourites.Adding a contact to your favouritesTouch to open your contacts.Touch a contact to view their details.Touch the star to the right of the contact's name. The star turns yellow.1 2 3 Removing a contact from your favourites listTouch to open your contacts.Touch the Favourites tab, and choose a contact to view its details.Touch the yellow star to the right of the contact's name. The star turns grey and the contact is removed from your favourites.1 2 3

110Import or export contactsTo import/export contact files (in vcf format) from a storage memory(Internal storage/memory card) or SIM or USIM card to your device or vice versa.Touch to open your contacts.Touch the Menu key > Import/Export.Select an desired option for importing/exporting. If you have more than one account, select an account to which you want to add the contact.1 2 3 Select contact files to import/export and select Import to confirm.Moving contacts from your Old Device to your New DeviceExport your contacts as a CSV file from your old phone to your PC using a PC sync program.Install LG PC Suite on the PC first. Run the program and connect your Android mobile phone to the PC using a USB cable.Select the . Go to File > Import and 4 1 2 3 4 Contacts

111d d m d select the CSV file saved on your PC.If the fields in the imported CSV file are different from those in LG PC Suite, you need to map the fields. After mapping the fields, click OK. The contacts are then added to LG PC Suite.If LG PC Suite detects the connection of your LG-E617g phone (using the USB cable), click Sync or Sync contacts to synchronise the contacts saved on your PC with your phone.3 4

112MessagingYour LG-E617g combines SMS and MMS into one intuitive, easy-to-use menu.Sending a messageTouch on the home screen, and touch to open a blank message.Enter a contact name or contact number in the To field. As you enter the contact name, matching contacts appear. You can touch a suggested recipient. You can add multiple contacts.1 2 NOTE: You will be charged for a text message for every person you send the message to.Touch Enter message field and start to compose your message.Touch the Menu key to open the Options menu. Choose from Add subject, Discard, Attach, Templates, Insert smiley and All messages. Touch Send to send your message.1 2 3 lidS4

113ns The message screen opens, with your message after Recipient Name/Number. Responses appear on the screen. As you view and send additional messages, a message thread is created. WARNING: The 160-character limit may vary from country to country depending on the language and how the SMS is coded.4 WARNING: If an image, video or audio file is added to an SMS message, it is automatically converted into an MMS message and you are charged accordingly.Threaded box Messages (SMS, MMS) exchanged with another party can be displayed in chronological order so that you can conveniently see an overview of your conversation.

114Using SmiliesLiven up your messages using Smilies.When writing a new message, touch the Menu key, then choose Insert smiley.Changing your message settingsYour LG-E617g message settings are predefined, so you can send messages immediately. You can change the settings based on your preferences.Touch on the home screen, and touch the Menu key, then tap Settings.EYouemTheaccYoucanMaTheappto sMessaging

115EmailYou can use the Email application to read emails from services other than Google Mail. The Email application supports the following account types: POP3, IMAP and Exchange.Your service provider or system administrator can provide the account settings you need.Managing an email accountThe first time you open the Email application, a setup wizard opens to help you to set up an email account.To add another email account:Touch > Apps tab > Email > in the account screen, touch > Settings > ADD ACCOUNTAfter the initial setup, Email displays the contents of your inbox. If you have added more than one account, you can switch among accounts. To change an email account's setting:Touch > Apps tab > Email > in the account screen, touch > Settings••

116To delete an email account:Touch > Apps tab > Email > in the account screen, touch > Settings > touch an account you want to delete > Remove accountEmail account screenYou can touch an account to view its Inbox. The account from which you send email by default is indicated with a tick. – Touch the folder icon to open the account folders.•Only the most recent emails in your account are downloaded to your phone. Working with account foldersEach account has an Inbox, Outbox, Sent and Drafts folder. Depending on the features supported by your account's service provider, you may have additional folders.Composing and sending emailTo compose and send a messageWhile in the Email application, touch the .1 A2 3 4 5 Email

117unt es der, Enter an address for the message's intended recipient. As you enter text, matching addresses are offered from your Contacts. Separate multiple addresses with semicolon.Add Cc/Bcc and add attachment files if required.Enter the text of the message. Touch the .If you aren't connected to a network, for example, if you're working in airplane mode, the messages that you send are stored in your Outbox folder until 2 3 4 5 you're connected to a network again. If it contains any pending messages, the Outbox is displayed on the Accounts screen.TIP! When a new email arrives in the inbox, you will receive a notification by sound or vibration. Tap the email notification to stop notifications.

118CameraGetting to know the viewfinder Zoom – Zoom in or zoom out. Alternatively you can use the side volume keys. Brightness – This defines and controls the amount of sunlight entering the image. Shot mode – Choose from Normal, Panorama or Continuous shot. Flash – Allows you to turn on the flash when taking a photo in a dark place. Settings – Touch this icon to open the Settings menu. Video mode – Touch this icon to switch to video mode. Capture – Takes a photo. Gallery – Touch to view the last photo you captured. This enables you to access your gallery and view saved photos within camera mode.NOTE: The memory capacity may differ depending on the shooting scene or shooting conditions.Ta1 2 3 4 5

119ght o Taking a quick photo Open the Camera application.Hold the phone, point the lens towards the subject you want to photograph.Touch the screen and a focus box will appear in the centre of the viewfinder screen. When the focus box turns green, the camera has focused on your subject.Touch the Capture icon to take the picture.1 2 3 4 5 Using the advanced settingsIn the viewfinder, touch to open all advanced options. : Restore all camera default settings. : Touch whenever you want to know how this function operates. This provides you with a quick guide. Change camera settings by scrolling through the list. After selecting the option, touch the Back key. - Focuses on the specific spot.•••

120 -Select the image resolution. If you choose the high resolution, the file size will increase, which means you will be able to store fewer photos in the memory. - Finds the color and light settings appropriate for the current environment. Choose from Auto, Portrait, Landscape, and Sunset. - The ISO rating determines the sensitivity of the camera's light sensor. The higher the ISO, the more sensitive the camera is. This is useful in darker conditions when you cannot use the flash. ••• - Improves colour qualities in different lighting conditions. - Choose a color tone to use for your new view. - Takes pictures a few seconds after clicking the shutter. This option is ideal if you want to be in the picture. - Activate to use your phone's location-based services. Take pictures wherever you are and tag them with the location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map. ••••CameraNwta•••

121nt r r f on-he NOTE: This function is only available when GPS is active. - Select one of the four shutter sounds. - Allows you to review images after taking pictures. - Select storage to save images.•••TIP! When you exit the camera, some settings return to their defaults, such as white balance, timer and scene mode. Check these before you take your next photo.TIP! The Settings menu is superimposed over the viewfinder so, when you change elements of the image colour or quality, you see a preview of the image change behind the Settings menu.

122After taking photos, select the image viewer icon to view the taken photos.To view more photos, scroll left or right.To zoom in or out, place two fingers on the screen and spread them apart (move your fingers closer together to zoom out) or double-tap the screen.To send a photo to others, touch Share via > desired item like Bluetooth, Email, Memo, Picasa and so on.To delete a photo, touch Delete .••••View a photoLearn to view photos saved in your phone's storage.In Home screen, open the application list and select Gallery.Select a photo to view.While viewing a photo, use the following options:To view more photos, scroll left or right.To zoom in or out, tap the screen with two fingers and spread them apart (move your fingers closer together to zoom out).1 2 ••CameraTvETitpTTouadvSeta C••

123's st ng wo ur To send a photo to others, touch Share via > desired item like Bluetooth, Email, Memo, Picasa and so on.TIP! If you have an SNS account and set it up on your phone, you can share your photo with the SNS community.To delete a photo, touch Delete .Touch the Menu key to open all advanced options.Set image as – Touch to use the image as a Contact photo, Lockscreen Wallpaper ••or Wallpaper.Move – Touch to move the image to other place.Rename – Touch to edit the name of the selected picture.Rotate left/right – Rotate left or right.Crop – Crop your photo. Move your finger across the screen to select the area.Edit - View and edit the picture. - Select the image resolution. If you choose the high resolution, the file size will increase, which means you will be able to

124store fewer photos in the memory. - Improves colour qualities in different lighting conditions. - Applies artistic effects to the pictures. - Applies the additional options for pictures.Slideshow – Auto review automatically shows you the picture you just recorded.Details – Show the picture information.NOTE: Some file formats are not supported depending on the software of the device.NOTE: If the file size exceeds the available memory, an error can occur when you open files.Camera VGeNa

125Video cameraGetting to know the viewfinder Zoom – Zoom in or zoom out. Alternatively you can use the side volume keys. Brightness – This defines and controls the amount of sunlight entering the video. Live effect – Changing backgrounds and providing morphing effects to transform facial features during video recording. Flash – Allows you to turn on the flash when recording a video in dark conditions. Settings – Touch this icon to open the settings menu. Camera mode – Touch this icon to switch to camera mode. Record – Starts recording. Gallery – Touch to view the last video you recorded. This enables you to access your gallery and view your saved videos from within video mode.NOTE: The zoom function is not available while recording a video.

126Shooting a quick videoTouch the Camera mode button down and the icon changes to . The video camera viewfinder appears on the screen.Holding the phone, point the lens towards the subject you want to capture in your video.Press the Record button once to start recording.A red light appears at the top corner of the viewfinder with a timer showing the length of the video.1 2 3 4 5 Touch on the screen to stop recording.Using the advanced settingsUsing the viewfinder, touch to open all the advanced options. - Restore all video camera default settings. - Touch if you want to know how this function operates. This provides you with a quick guide. Adjust the video camera setting by scrolling through the list. After selecting the option, touch 6 Video camera

127the the Back key - Touch to set the size (in pixels) of the video you are recording. - Improves colour qualities in different lighting conditions. - Apply a special effect, such as sepia or mono tones. - Activate to use your phone's location-based services. Records videos wherever you are and tag them with the location. If you upload tagged videos to a blog that supports geotagging, you can see the videos displayed on a map. - Choose Off to record a video without sound. - Auto review automatically shows you the video you just recorded. - Select storage to save videos.After recording videos, select the image viewer icon to view the recorded videos.To view more videos, scroll left or right.To send a video to others, select Share via desired item like Bluetooth, Messaging, YouTube and so on.••

128To play a video, select Play .To delete a video, select Delete .Play a videoLearn to use the video player to play various kinds of videos.In Home screen, open the application list and select Gallery.Select a video (with the icon) to play.Rotate the device to landscape view.Control playback with the virtual keys. ••1 2 3 4 NOTE:Some file formats are not supported depending on the software of the device.If the file size exceeds the available memory, an error can occur when you open files.••TouadvTouoptScrratiBrileveDetsucVideo camera

129 Touch the Menu key to open all advanced options.Touch to open all the advanced options.Screen ratio – Tap to select desired screen ratio.Brightness – Check for adjusting brightness level for comfortable video viewing.Details – Tap to see a detailed information, such as the name, date, time, size and typeAdjusting the volume when viewing a videoTo adjust the volume of a video while it is playing, use the volume keys on the left-hand side of the phone.

130You can store multimedia files on a memory card for easy access to all your image and video files.GalleryLearn to view photos and play videos saved in your device’s memory and memory card.Touch > Apps tab > Gallery. Open a list of catalogue bars that store all your multimedia files.Supported file formats (Type Format)Image: bmp, gif, jpg, pngVideo: 3gp, mp4, avi, wmv, flv, mkv 1 •••(Codec: MPEG4, H.263, Sorenson H.263, H.264, VC-1, DivX®, XviD)Avoid locking the device’s screen while playing a DivX Video-On-Demand. Each time you lock the screen while playing a DivX Video-On-Demand, one of your available rental counts will be decremented.Some file formats are not supported depending on the software of the device.If the file size exceeds the available memory, an error can occur when you open files.•••MultimediaMuYouthaacctabTraUS1 2

131e.Music PlayerYour LG-E617g has a built-in music player that lets you play all your favourite tracks. To access the music player, Touch > Apps tab > Music Player.Transferring music files using USB mass storage devicesConnect the LG-E617g to a PC using a USB cable.If you haven't installed LG Android Platform Driver on your PC, you need to change the settings manually. Choose 1 2 System settings > Connectivity > USB Connection type, then select Media sync.You can view the mass storage content on your PC and transfer the files.NOTE: If you installed LG Android Platform Driver, you will immediately see a pop-up saying Turn on USB storage.3

132Playing a songIn the Home screen, touch > Apps tab > Music Player. Touch Songs.Select the song you want to play.Touch to pause playback.Touch to resume playback.Touch to skip to the next track in the album, playlist or shuffle.1 2 3 Touch to go back to the beginning of the song. Touch twice to return to the previous song.Touch to manage the music volume.Touch to set repeat mode.Touch to play the current playlist in shuffle mode.Touch to see the current playlist.Touch to see lyrics. This option is on only if the song includes the lyrics. To muon ToudispringDetMultimedia

133ly To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone.Touch and hold any song in the list. It displays Play, Add to playlist, Set as ringtone, Delete, Share, Search and Details as options.NOTE: Music file copyrights may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music. In some countries, national laws prohibit private copying of copyrighted material. Before downloading or copying the file, check the national laws of the relevant country concerning the use of such material.

134FM RadioYour LG-E617g has a built-in FM Radio so you can tune in to your favourite stations and listen on the go.NOTE: You need to use your headphones to listen to the radio. Insert it into the headphone jack.Searching for stationsYou can tune in to radio stations by searching for them manually or automatically. They are then saved to specific channel numbers, so you don't have to find them again. You can store up to 48 channels on your phone.Tuning in automaticallyIn the Home screen, touch > Apps tab > FM Radio.Touch , then select Auto scan.During auto scanning, touch Stop if you want to stop scanning. Only scanned channels are saved before you stop scanning.1 2 3 MultimediaNaTthaIfmm

135o s u NOTE: You can also manually tune in to a station using the on-screen wheel.TIP! To improve radio reception, extend the headset cord as this also functions as the radio antenna.If you connect a headset not specifically made for radio reception, radio reception may be poor.LG Tag+What is LG Tag+LG Tag+ allows easy saving and loading to NFC tag, which can be customized to suit certain environments.Using Tag+ writingIn the Home screen, touch the Applications tab and select LG Tag+.Select the desire mode (Car/Office/Sleep/User mode settings) and tap Write on tag.1 2

136LG excwauseLifeHofro1 2 LGTouch the back of your device to a tag or a device to share, then launching application and changing settings can be set.Using Tag+ readingWhen touching the set tag, mode will be activated right away.3 Multimedia

137LG SmartWorld offers an assortment of exciting content - games, applications, wallpaper and ringtones - giving LG phone users the chance to enjoy richer "Mobile Life" experiences.How to Get to LG SmartWorld from Your PhoneTap the icon to access LG SmartWorld.Tap Sign in and enter ID/PW for LG SmartWorld. If you have not yet signed up, tap Register and get a LG SmartWorld 1 2 membership.Download the content you want.NOTE: What if there is no icon? 1 Using a mobile Web browser, access LG SmartWorld (www.lgworld.com) and select your country. 2 Download LG SmartWorld App. 3 Execute and install the downloaded file.4 Access LG SmartWorld by tapping the icon.3 LG SmartWorld

139ent UtilitiesSetting your alarmTouch > Apps tab > Alarm/Clock > After you set the time, the LG-E617g lets you know how much time is left before the alarm will sound.Set Snooze duration, Vibration, Alarm tone, Puzzle lock and Memo. Touch Save.Using your calculatorTouch > Apps tab > CalculatorTouch the number keys to enter numbers.1 2 3 1 2 For simple calculations, touch the function you want (+, –, x or ÷) followed by =.For more complex calculations, touch , select the Advanced panel, then choose sin, cos, tan, log and so on.Adding an event to your calendarTouch > Apps tab > CalendarTap on the month displayed at left top corner, you can find the different view types of the calender (Day, Week, Month, Agenda).3 4 1 2

140Tap on the date you want to add event on.Tap on to add a event.Touch Event name then enter the event name.Touch Location and enter the location. Check the date and enter the time you want your event to start and finish.If you want to add a note to your event, touch Description and enter the details.3 4 5 6 7 If you want to repeat the alarm, set REPEAT, and set REMINDERS, if necessary.Touch Done to save the event in the calendar.Polaris OfficePolaris Office is a professional mobile office solution that lets users conveniently view various types of office documents, including Word, Excel and PowerPoint files, anywhere, anytime, using their mobile devices.Touch > Apps tab > Polaris Office8 9 UtilitiesMaPolconincdelVieMovarOffon docandorig

141ce ng re, Managing filesPolaris Office provides mobile users with convenient file management features, including copying, moving and pasting, and deleting files and folders right on the device.Viewing filesMobile users can now easily view a wide variety of file types, including Microsoft Office documents and Adobe PDF, right on their mobile devices. When viewing documents using Polaris Office, the objects and layout remain the same as in their original documents.BackupAbout backing up and restoring smart phone dataIt recommends that you regularly create and save a backup file on the Storage card, especially before you update any software. Maintaining a current backup file on Storage memory might allow you to recover smart phone data if your smart phone is lost, stolen, or corrupted by an unforeseen issue.This Backup application support between LG smart phones, other S/W version or OS. And so, when you buy the new LG smart phone,

142you can back up the current LG-E617g smart phone data on your new one.If you have preloaded application Backup on your smart phone, you can back up and restore most of your smart phone data, applications (Downloaded,Pre-installed), Bookmarks, Calendar, Call log, Contacts, Home Screen, Messages, and System settings using this application.To perform a manual backup of your smart phone data.To schedule automatic backups of your smart phone data.••To restore your smart phone data.Back up your smart phone dataInsert to the memory card into the slot and check out the storage status.Touch the Application tab , and then select Backup > Backup > Storage Card or Internal memory.Touch the Add new to enter a name for your backup file, and then select Continue.Select the check box next to the item you want to back up, and then select •1 2 3 4 UtilitiesSchYoutheyouthe5 1 2

143en Continue to back up.When all selected files backed up, you will see the message ‘Done’ and select Continue to finish backing up data.Scheduling automatic backupsYou can also enable automatic backups of the data on your smart phone according to your schedule setting. To do this, complete the following steps:Insert to the memory card into the slot and check out the storage status.Touch the Application tab , and then 5 1 2 select Backup > Schedule.On the Scheduled Backup Location screen, touch Storage Card or Internal memory.From the list, select how often you want to back up your device data and settings, and select Continue.Select the check box next to the data you want to back up, and then select Continue to finish the schedule set.3 4 5

144Restoring smart phone dataTo restore data that is in your on-board device memory, mass storage mode must be turned off.NOTE: All files that are stored on your smart phone are deleted before the backup file is restored.Insert to the memory card into the slot and check out the storage status.Touch the Application tab , and then select Backup > Restore > Storage 1 2 Card or Internal memory.On the Restore screen, select a backup file that contains the data you want to restore. Select the check box next to the item you want to restore, and then select Continue to restore to phone.NOTE: Please note that your phone data will be overwritten with the contents of your backup.3 4 UtilitiesNtopPrescrsele5 6

145p ou nue a If the backup file is encrypted, type the password that you set to encrypt. When all selected files restored, you will see the message ‘Done’ and select Yes to restart the phone.NOTE: You can set Enable encryption to encrypt your backup files for extra protection. Press the Menu from the Backup screen, and select Settings > Security and select the check box. And after enabling 5 6 encryption, To restore synchronized organizer data, you must have an activation password.NOTE: You can also enable automatic delete old backups and only keep the most recent backup. Press the Menu from the Backup & Restore screen, and select Settings > Scheduled backup > Auto delete old backups to select the number of scheduled backups to keep.•

146When you insert a memory card in your smart phone, the file directory of the memory card will appear in the Polaris Office / My folders/_ExternalSD/backup folder under the Storage Memory (when memory card is inserted.).•Backup allows a user to immediately back up what the user selects. (Application (Downloaded, Pre-installed), Contacts, Messages, Call log, Calendar, Bookmarks) For the recent backup history, if there is no history of backups, “No backup” is displayed ; if there is history, up to two backed up files are displayed.•Utilities•

147o Restore allows a user to restore backed up items when the user wants using backup files. The Restore application can be used on the backed up smart phone as well as other LG smart phones.•Schedule allows a user to set a time for a scheduled backup by automatically generating a backup file at a desired time such as an early morning when the user usually does not use the phone. No scheduled backup is set by default if there is no previous setting through Schedule; otherwise, the time of next scheduled backup is displayed.•

148BrowserBrowser gives you a fast, full-colour world of games, music, news, sport, entertainment and much more, right on your mobile phone. Wherever you are and whatever you enjoy.NOTE: Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider.Using the web toolbar Touch to go back a page. Touch to go forwards a page, to the page you connected to after the current one. This is the opposite of what happens when you press the Back key, which goes to the previous page. Touch and hold, up and down to zoom in or out of browser. Touch to add a new window. Touch to add a favourite bookmarks.The webUsPreRefSavpagShapagFinwoReqthe

149nt y, m in Using optionsPress to view options.Refresh – Update the current web page.Save to Bookmarks – Add the current web page as bookmark.Share page – Allows you to share the web page with others.Find on page – Allows you to find letters or words on the current web page.Request desktop site – Allows you to view the web page as desktop.Save for offline reading – You can view the saved web page.Settings – Displays Browser settings.

150LG On-Screen Phone 2.0LG On-Screen Phone 2.0 allows you to view your mobile phone screen from a PC via a USB, Bluetooth, or Wi-Fi connection.You can also control your mobile phone from your PC using the mouse or keyboard.On-Screen Phone 2.0 icons Connects your mobile phone to your PC, or disconnects it. Launches LG Home Panorama or changes the On-Screen Phone preferences. Exits the On-Screen Phone program. Maximises the On-Screen Phone window. Minimises the On-Screen Phone window.On-Screen Phone 2.0 featuresReal-time transfer and control: Displays and controls your mobile phone screen when connected to your PC.•MmaTcyFSGPcFS••••

151ays Mouse control: Allows you to control your mobile phone by using the mouse to click and drag on your PC screen.Text input with keyboard: Allows you to compose a text message or note using your computer keyboard.File transfer (mobile phone to PC): Sends a file from your mobile phone (e.g. Gallery, Video Player, Music Player and Polaris Office) to your PC. Simply right-click and drag to send a file to your PC.File transfer (PC to mobile phone): Sends files from your PC to your mobile ••••phone. Simply select the files you wish to transfer and drag and drop into the On-Screen Phone window. The files you send are stored on OSP folder.Real-time event notifications: Prompts a pop-up to inform you of any incoming calls or text, as well as alarm and event notifications.LG Home Panorama: Shows the whole workspaces of LG Home. You can easily organise icons or widgets and run an application by double-clicking the shortcut.••

152NOTE: Please make sure LG Home is a default launcher.Installing On-Screen Phone on your PCVisit LG Home (www.lg.com) and select a country of your choice.Go to Support > Mobile Phone Support > Search the Model (LG-E617g) > Click OSP( On-Screen Phone ) to download. You can install the On-Screen Phone on your PC. 1 2 Connecting your phone to your PCOn-Screen Phone 2.0 provides USB, Bluetooth and Wi-Fi connection.Please follow the instruction on Connection Wizard of OSP program.NOTE: Please make sure USB connection type is a PC software.NSsPPruccChcoOncLG On-Screen Phone 2.0

153r n NOTE: Please make sure that On-Screen Phone check box in System settings > Connectivity > On-Screen Phone settings.Please make sure that the battery may run out more quickly due to the current consumption if On-Screen Phone is connected via Wi-Fi.Checking the On-Screen Phone connectionOnce the devices have been connected, drag down the status bar at the top of the home screen to check the On-Screen Phone connection status.Disconnecting your phone from your PCTouch and slide the notification drawer down and touch the On-Screen Phone connected.Touch Disconnect On-Screen Phone > Disconnect.1 2

154In the Home screen, touch > System settings.WIRELESS & NETWORKSHere, you can manage Wi-Fi and Bluetooth. You can also set up mobile networks and switch to airplane mode.< Wi-Fi >Wi-Fi – Turns on Wi-Fi to connect to available Wi-Fi networks.Wi-Fi settings – Allows you to set up and manage wireless access points. Set network notification or add a Wi-Fi network. The advanced Wi-Fi settings screen is accessed from the Wi-Fi settings screen. Press the and touch Advanced.TIP! How to obtain the MAC addressTo set up a connection in some wireless networks with MAC filters, you may need to enter the MAC address of your LG-E617g into the router.You can find the MAC address in the following user interface: Touch Apps tab > Settings > Wi-Fi > > Advanced > MAC Address.Settings< BTurdevTurRef< DDisdat< CYouas offe

155ed < Bluetooth >Turns on Bluetooth to connect to Bluetooth devices.Turn the Bluetooth wireless feature on or off. Refer to page Bluetooth chapter in details.< Data usage >Displays the data usage and set mobile data limit.< Call >You can configure phone call settings such as call forwarding and other special features offered by your carrier.< More >Airplane mode – After switching to airplane mode, all wireless connections are disabled.VPN – Displays the list of Virtual Private Networks (VPNs) that you've previously configured. Allows you to add different types of VPN.NOTE: You must set a lock screen PIN or password before you can use credential storage.

156Wi-Fi Direct – You can turn on or off.Portable Wi-Fi hotspot – You can configure the portable Wi-Fi hotspot settings.NFC – Your LG-E617g is NFC-enabled mobile phone. NFC (Near Field Communication) is a wireless connectivity technology that enables two-way communication between electronic devices. It operates over a distance of a few centimeters. You can share your contents with a NFC tag or another device via simple touch with your device. If you touch a NFC tag with your device, it will display the tag contents on your device.NOTE: Be careful not to scratch or damage the inside of the battery cover as this is the NFC antenna. To switch NFC on or off: From the Home screen, touch and slide the notification drawer down with your finger, then select the NFC icon to turn it on.NOTE: When the Airplane mode is activated, NFC application can be used. UdNAndpagscrdevSettings

157me ct Using NFC: To use NFC, make sure your device is switched on and activate the NFC setting, if disabled.Android Beam – You can beam a web page, a video, or other content from your screen to another device by bringing the devices together (typically back to back).NOTE: Make sure both devices are unlocked, support Near Field Communication (NFC), and have both NFC and Android Beam™ turned on.

159nds Touch sounds – Allows you to set your phone to play a sound when you touch buttons, icons and other onscreen items that react to your touch.Screen lock sound – Allows you to set your phone to play a sound when locking and unlocking the screen.Vibrate on touch – Allows you to set the vibration feedback for phone screen touch.< Display >Brightness – Adjust the screen brightness.Auto-rotate screen – Set to switch orientation automatically when you rotate the phone.Screen timeout – Set the time for screen timeout.Font size – Change the display font size Font Key LED – Set the front key LED time.Motion sensor calibration – Improve the accuracy of the tilt and speed of the sensor.< Home screen >Wallpaper – You can select the wallpaper from Gallery, Live wallpapers and Wallpapers.

160< Lock screen >Screen Lock – Set an unlock pattern to secure your phone. Opens a set of screens that guide you through drawing a screen unlock pattern. You can set a Slide, Pattern, PIN instead of a Password or leave it as None.When you turn on your phone or wake up the screen, you're asked to draw your unlock pattern to unlock the screen.< Storage >INTERNAL STORAGE – View the internal storage usage.SD CARD – Check total available SD card space. Touch Unmount SD card for safe removal. Erase SD card if you want to delete all data from the SD card.< Power Saver >Here, you can manage the battery and check the power saving items. Also, you can check the battery use.< AYouPE< APerin tactsett(bu< LGooGooSettings

161ete eck ck < Apps >You can view and manage the applications.PERSONAL< Accounts & sync >Permits applications to synchronise data in the background, whether or not you are actively working in them. Deselecting this setting can save battery power and lowers (but does not eliminate) data usage.< Location services >Google's location service – If you select Google's location service, your phone determines your approximate location using Wi-Fi and mobile networks. When you select this option, you're asked whether you consent to allowing Google to use your location when providing these services.GPS satellites – If you select GPS satellites, your phone determines your location to street level accuracy.Location & Google search – If you select google use your location to improve search results and other services.

162< Security >Set up SIM card lock – Set up SIM card lock or change the SIM PIN.Make passwords visible – Show password as you type.Device administrators – View or deactivate device administrators.Unknown sources – Default setting to install non-Market applications.Trusted credentials – Display trusted CA certificates.Install from SD card – Choose to install encrypted certificates from your SD card.Clear credentials – Remove all certificates.< Language & input >Use the Language & input settings to select the language for the text on your phone and for configuring the on-screen keyboard, including words you've added to its dictionary.< Backup & reset >Change the settings for managing your settings and data.BacsettserBacaccAutsettappFacto tall ythissamSettings

163es.o Back up my data – Set to back up your settings and application data to the Google server.Backup account – Set to back up your account.Automatic restore – Set to restore your settings and application data when the applications are reinstalled on your device.Factory data reset – Reset your settings to the factory default values and delete all your data. If you reset the phone in this way, you are prompted to reenter the same information as when you first started Android.SYSTEM< Date & time >Use Date & time settings to set how dates are displayed. You can also use these settings to set your own time and time zone rather than obtaining the current time from the mobile network.< Accessibility >Use the Accessibility settings to configure accessibility plug-ins you have installed on your phone.

164NOTE: Requires additional plug-ins.< Connectivity >USB connection type – You can set the desired mode (Charge only, Media sync, USB tethering or PC software).Ask on connection – Ask USB connection mode when connecting to a computer.On-Screen Phone settings – Displaying screen and controlling phone from PC are available through USB, Bluetooth or Wi-Fi connection.< About phone >View legal information and check phone status and software version.Phone software updateLG Mobile phone software update from the InternetFor more information about using this function, please visit http://update.lgmobile.com or http://www.lg.com/common/index.jsp select country and language. This feature allows you to update the firmware on your phone to a newer version conneewilla ndevAs reqdursurthaPlecabserSettings

165m e.n conveniently from the Internet without needing to visit a service centre. This feature will only be available if and when LG makes a newer firmware version available for your device.As the mobile phone firmware update requires the user's full attention for the duration of the update process, please make sure you check all instructions and notes that appear at each step before proceeding. Please note that removing the USB data cable or battery during the upgrade may seriously damage your mobile phone.NOTE: LG reserves the right to make firmware updates available only for selected models at its own discretion and does not guarantee the availability of the newer version of the firmware for all handset models.LG Mobile Phone software update via Over-the-Air (OTA)This feature allows you to update your phone's software to a newer version conveniently via OTA, without connecting with a USB data cable. This feature will only

166be available if and when LG makes a newer firmware version available for your device.First, you can check the software version on your mobile phone: System settings > About phone > Software update > Check now for update.You can also delay the update by 1 hour, 4 hours, 8 hours or One day. In this case, the application will notify you to update when the time is up. You can also rearrange an update manually.NOTE: This feature is dependent on your network service provider, region and country.DivX Mobile ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABCerto p(VOcoddevmoregDiv320Settings

167eo Xsit re ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to 320x240. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

168These accessories are available for use with the LG-E617g. (Items described below may be optional.)Travel adaptor Battery Stereo headsetData cableConnect your LG-E617g and PC.User GuideLearn more about your LG-E617g.NFC TagNOTE: • Always use genuine LG accessories.• Failure to do this may void your warranty.• Accessories may vary in different regions.AccessoriesThiproMeSIMNocoLoTr

169al.) This chapter lists some problems you might encounter while using your phone. Some problems require you to call your service provider, but most are easy to fix yourself.Message Possible causes Possible corrective measuresSIM error There is no SIM card in the phone or it is inserted incorrectly.Make sure that the SIM card is correctly inserted.No network connection/ Losing networkSignal is weak or you're outside the carrier network.Operator applied new services.Move towards a window or into an open area. Check the network operator coverage map.Check whether the SIM card is more than 6~12 months old. If so, change your SIM at your network provider's nearest branch. Contact your service provider.Troubleshooting

170Message Possible causes Possible corrective measuresCodes do not matchTo change a security code, you will need to confirm the new code by re-entering it.The two codes you have entered do not match.If you forget the code, contact your service provider.Any application cannot be setNot supported by service provider or registration required. Contact your service provider.Calls not availableDialling error New SIM card inserted. Pre-paid charge limit reached.New network not authorised.Check for new restrictions.Contact service provider or reset limit with PIN2.MePhbeTroubleshooting

1712.Message Possible causes Possible corrective measuresPhone cannot be switched onOn/Off key pressed too briefly.Battery is not charged. Battery contacts are dirty.Press the On/Off key down for at least two seconds.Charge battery. Check charging indicator on the display.Clean the battery contacts.

172Message Possible causes Possible corrective measuresCharging errorBattery is not charged. Charge battery.Outside temperature is too hot or cold.Make sure phone is charging at a normal temperature.Contact problemCheck the charger and connection to the phone. Check the battery contacts and clean them if necessary.No voltage Plug the charger into a different socket.Charger defective Replace charger.Wrong charger Only use original LG accessories.Battery defective Replace battery.MeNupeImrecSMFilopSDwoTroubleshooting

173e. Message Possible causes Possible corrective measuresNumber not permittedThe Fixed dialling number function is on.Check the Settings menu and turn the function off.Impossible to receive / send SMS & pictureMemory full Delete some messages from the phone.Files not opening Unsupported file format Check the file formats that can be supported.SD card not workingFAT16, FAT32 file system supportedCheck SD card file system via card reader, or format SD card using the phone.

174Message Possible causes Possible corrective measuresThe screen does not turn on when I receive a call.Proximity sensor problemIf you use any protection tape or case, check to see if it has covered the area around the proximity sensor. Make sure that the area around the proximity sensor is clean.No sound Vibration mode Check the settings status of the sound menu to make sure you are not in vibrate or silent mode.Hang up or freeze Intermittent software problemRemove the battery, insert it again and switch on the phone.Try to perform a software update via the website.PlethisSuFATroubleshooting

Navigation menu