LG Electronics USA G5300S Single-Mode GSM1900 Phone User Manual

LG Electronics USA Single-Mode GSM1900 Phone Users Manual

UserManual.wiki >

LG Electronics USA >

G5300S User Manual

Users Manual

GPRS PhoneUSER’S MANUALMODEL: G5300SPlease read this manual carefully before operating your set. Retain it for future reference.ENGLISH

ENGLISH3G5300S Phone

For Your SafetyENGLISH4Important InformationThis user guide contains important information on the use andoperation of this phone. Please read all the information carefullyfor optimal performance and to prevent any damage to, or misuseof, the phone. Any changes or modifications not expresslyapproved in this user guide could void your warranty for thisequipment.Before You StartSafety InstructionsWARNING! To reduce the possibility of electric shock, do notexpose your phone to high humidity areas, such as the bathroom,swimming pool, etc.Always store your phone away from heat. Never store yourphone in settings that may expose it to temperatures less than 32°F or greater than 104 °F, such as outside during a snowstorm orin your car on a hot day. Exposure to excessive cold or heat willresult in malfunction, damage and/or catastrophic failure.Be careful when using your phone near other electronicdevices. RF emissions from your mobile phone may affect nearbyinadequately shielded electronic equipment. You should consultwith manufacturers of any personal medical devices such aspacemakers and hearing aides to determine if they are susceptibleto interference from your mobile phone. Turn off your phone in amedical facility or at a gas station. Never place your phone in amicrowave oven as this will cause the battery to explode.IMPORTANT! Please read the TIA SAFETY INFORMATION onpage 96 before using your phone.

Safety InformationPlease read and observe the following information for the safe andproper use of your phone and to prevent any unanticipated damage.Also, keep the user’s manual in an accessible place at all the timesafter reading it.•Unplug the power cord and charger during a lightning storm toavoid electric shock or fire.•Do not use your phone in high explosive areas as the phone maygenerate sparks.•Do not put your phone in a place subject to excessive dust, andkeep the minimum required distance between the power cord andheat sources.•Unplug the power cord prior to cleaning your phone, and clean thepower plug pin when it is dirty.•Do not damage the power cord by bending, twisting, pulling, orsubjecting it to heat. Do not use the plug if it is loose as it maycause fire or electric shock.•Hold the power cord plug firmly to plug and unplug the power cord.Ensure the plug is firmly connected. If it is not firmly connected, itmay cause excessive heat or fire.•Do not place a heavy item on the power cord. Do not allow thepower cord to be crimped as it may cause fire or electric shock.•Be careful not to let the battery contact metal conductors such as anecklace or coins. When shorted, it may cause an explosion.•Do not disassemble or impact the battery as it may cause electricshock, short-circuit, and fire. Store the battery in a place out ofreach of children.ENGLISH5

•Using a damaged battery or placing a battery in your mouth maycause serious injury.•Do not place items containing magnetic components such as acredit card, phone card, bank book or a subway ticket, near yourphone. The magnetic strip can be damaged by the phone.•Do not hold or let the antenna come in contact with your bodyduring a call.•Talking on your phone for a long period of time may reduce the callquality due to heat generated during the use of the phone.•Do not allow excessive vibration or impact to the phone.•When you do not plan to use the phone for a long period of time,store it in a safe area with the power cord unplugged.FCC RF Exposure InformationWARNING! Read this information before operating the phone. InAugust 1996, the Federal Communications (FCC) of the UnitedStates, with its action in Report and Order FCC 96-326, adopted anupdated safety standard for human exposure to radio frequency (RF)electromagnetic energy emitted by FCC regulated transmitters.Those guidelines are consistent with the safety standard previouslyset by both U.S. and international standards bodies.The design of this phone complies with the FCC guidelines andthese international standards.CAUTIONUse only the supplied and approved antenna. Use of unauthorizedantennas or modifications could impair call quality, damage thephone, void your warranty and/or result in violation of FCCregulations. Do not use the phone with a damaged antenna. If adamaged antenna comes into contact with skin, a minor burn mayresult. Contact your local dealer for a replacement of antenna.ENGLISH6For Your Safety

ENGLISH7Body-worn OperationThis device was tested for typical body-worn operations with theback of the phone kept 1.5 cm from the body. To comply with FCCRF exposure requirements, a minimum separation distanceof 1.5 cm must be maintained between the user’s body andthe back of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components should not beused. Body-worn accessories that cannot maintain 1.5 cmseparation distance between the user’s body and the back of thephone, and have not been tested for typical body-worn operationsmay not comply with FCC RF exposure limits and should be avoided.Vehicle Mounted External Antenna (optional, if available)A minimum separation distance of 8 inches (20 cm) must bemaintained between the user/bystander and the vehicle mountedexternal antenna to satisfy FCC RF exposure requirements. Formore information about RF exposure, visit the FCC website atwww.fcc.govFCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 of FCC rules.Operation is subject to the following two conditions: (1) This deviceand its accessories may not cause harmful interference, and (2) thisdevice and its accessories must accept any interference received,including interference that may cause undesired operation.Cautions for Battery•Do not disassemble.•Do not short-circuit.•Do not expose to high temperature: 60°C (140°F).•Do not incinerate.

Battery Disposal•Please dispose of your battery properly or bring to your localwireless carrier for recycling.•Do not dispose in fire or with hazardous or flammable materials.Adapter (Charger) Cautions•Using the wrong battery charger could damage your phone andvoid your warranty.•The adapter or battery charger is intended for indoor use only.Do not expose the adapter or battery charger to direct sunlight or useit in places with high humidity, such as the bathroom.ENGLISH8For Your Safety

ENGLISH9OverviewPart of the Phone ................................................................ 13• Front of the Phone ............................................................. 13• Rear of the Phone .............................................................. 14Key Description ................................................................... 15• Alphanumeric Keys ............................................................ 17Display InformationDisplay Information ............................................................. 18• On-Screen Icons ................................................................ 18Getting StartedInstallation ........................................................................... 20• Inserting the SIM Card ....................................................... 20• Installing the Battery .......................................................... 21• Charging the Battery .......................................................... 22• Disconnecting the charger ................................................. 23Powering On Sequence ...................................................... 24• To get started with the phone ............................................ 24• To turn off the phone .......................................................... 24Access Codes ...................................................................... 25• PIN code (4 to 8 digits) ...................................................... 25• PIN2 code (4 to 8 digits) .................................................... 25• PUK code (4 to 8 digits) ..................................................... 25• PUK2 code (4 to 8 digits) ................................................... 26• Security code (4 to 8 digits) ............................................... 26Contents

ENGLISH10Accessing the MenuPhonebook ........................................................................... 27Menu Tree ............................................................................ 28Messages [Menu 1] ............................................................. 30• Write short message [Menu 1-1] ........................................ 30• Write multimedia message [Menu 1-2] .............................. 32• Inbox [Menu 1-3] ................................................................ 38• Outbox [Menu 1-4] ............................................................. 40• Voice mail [Menu 1-5] ........................................................ 41• Info service [Menu 1-6] ...................................................... 42• Templates [Menu 1-7] ........................................................ 43• Settings [Menu 1-8] ............................................................ 44Call Register [Menu 2] ........................................................ 47• Missed calls [Menu 2-1] ..................................................... 47 • Received calls [Menu 2-2] .................................................. 47• Dialled calls [Menu 2-3] ...................................................... 47• All calls list [Menu 2-4] ....................................................... 47• Delete recent calls [Menu 2-5] ........................................... 47• Call charge [Menu 2-6] ....................................................... 49• GPRS information [Menu 2-7] ............................................ 50Profiles [Menu 3] ................................................................. 51• Vibrate only [Menu 3-1] ...................................................... 51• Quiet [Menu 3-2] ................................................................ 51• General [Menu 3-3] ............................................................ 51• Loud [Menu 3-4] ................................................................. 51• Headset [Menu 3-5] ........................................................... 51• Car [Menu 3-6] ................................................................... 52

ENGLISH11Settings [Menu 4] ................................................................ 54• Alarm clock [Menu 4-1] ...................................................... 54• Date & Time [Menu 4-2] ..................................................... 54• Phone settings [Menu 4-3] ................................................. 55• Call settings [Menu 4-4] ..................................................... 57• Security settings [Menu 4-5] .............................................. 61• Network settings [Menu 4-6] .............................................. 64• Reset settings [Menu 4-7] .................................................. 65Organizer [Menu 5] .............................................................. 66• Scheduler [Menu 5-1] ......................................................... 66• Phone book [Menu 5-2] ...................................................... 67Fun & Tools [Menu 6] .......................................................... 76• Calculator [Menu 6-1] ......................................................... 76• My folder [Menu 6-2] .......................................................... 76• Game [Menu 6-3] ............................................................... 77• Unit converter [Menu 6-4] .................................................. 78• World time [Menu 6-5] ........................................................ 78WAP services [Menu 7] ....................................................... 79• Home [Menu 7-1] ............................................................... 79• Bookmarks [Menu 7-2] ....................................................... 79• Push messages [menu 7-3] ............................................... 79• Profiles [Menu 7-4] ............................................................. 80• Go to URL [Menu 7-5] ........................................................ 82• Cache settings [Menu 7-6] ................................................. 83• Security certifications [Menu 7-7] ....................................... 83• Reset profiles [Menu 7-8] ................................................... 83

ENGLISH12Java [Menu 8] ...................................................................... 84• Applications [Menu 8-1] ..................................................... 84• Memory status [Menu 8-2] ................................................. 85• Download [Menu 8-3] ......................................................... 85Internet On-line menu ......................................................... 86Additional FunctionsHow to Use Data and Fax call ............................................ 87• Sending Data or Fax Calls ................................................. 87• Receiving Data or Fax Calls .............................................. 87In call Menu .......................................................................... 891. During a call ..................................................................... 892. Multiparty or Conference Calls ......................................... 91Accessories ......................................................................... 94Safety Guidelines ................................................................. 96Technical Data ................................................................... 111

ENGLISH13Front of the Phone1 Earpiece2 Display Screen3 Soft Left Key4 Navigation Keys5 Send Key6 Star Key7 Soft Right Key8 END/PWR keys9 Numeric Keys10 Hash Key11 Microphone12 Ear MicrophoneConnector13 WAP Hotkey/Clear keyPart of the PhoneOverview

ENGLISH14Rear of the Phone1 Battery2 Cable Connector/ Battery Charging Connector/Hands-Free Car kit Connector3 Battery Terminals4 SIM Card Socket5 Handstrap Hole6 Battery Lock7 Ear Microphone Connector6574321Part of the PhoneOverview

ENGLISH15Key DescriptionOverviewThe following shows key components of the phone.Keypad DescriptionKey Description< > Soft Left Key / Soft Right KeyEach of these keys performs the function indicated by the text on the display immediately above it.WAP Hotkey / Clear keyUsed to connect to WAP directly by pressing this key.Used to delete character(s).Navigation KeysUsed to scroll through name, phone numbers, menusor setting options.Used to enter Message menu directly.Used to scroll through names, phone numbers.Send KeySYou can dial a phone number and answer a call. If you press this key without entering a number, your phone shows the most recently dialed number.Numeric Keys0These keys are used mainly to dial in standby mode and enter numbers or characters in editing mode. When you press these keys for a long time.9• Used to call your voicemail box by 1.•Used to call for international call by 0.• Used to call Speed dials by from 2to 9.~

ENGLISH16Key DescriptionOverviewKey Description*Used to enter the vibration mode by pressing this keyfor a long time.#Used to call by voice dial with long pressing this key. This key is also used as Ear mic. hook key whenconnecting Ear mic.END/PWR KeyEUsed to end or reject a call. This key is also used as Power Key. Pressing and holding this key for a fewseconds.

ENGLISH17Alphanumeric KeysThe alphabet and numerical keypad mapping relation are listed asthe following table.Key Description1. , / ? ! - : ’ "2A B C 2 Ä À Á Â Ã Å Æ Ç a b c ä à á â ã å ç 3D E F 3 Ë È É Ê d e f ë è é ê 4G H I 4 Ï Ì Í Î ˝g h i ï ì í î ©5J K L 5 j k l6M N O 6 Ñ Ö Ò Ó Ô Õ Œ m n o ñ ö ò ó ô õ œ 7P Q R S 7 Í p q r s ß ß8T U V 8 Ü Ù Ú Û t u v ü ù ú û 9W X Y Z 9 w x y z00 [Space Key]Overview

ENGLISH20Installation Getting StartedInserting the SIM CardLocate the SIM card socket in the back of the phone. Follow the steps below to install the SIM card.1. Remove the battery if attached.2. Slide the SIM card into the slot,under the silvery holders, with thegolden connectors facing down andthe cut corner to the right.3. If you need to remove the SIM card,press the upper part of SIM card withthe thumb, then carefully slide it outof the SIM card slot.Notice• Before installing always make sure that the phone isswitched off and remove the battery.• The metal contact of the SIM card can be easily damagedby scratches. Pay special attention to the SIM card whenyou handle and install. Follow the instructions supplied withthe SIM card.➊

ENGLISH21Getting Started➋1. Place the battery on the back of thephone.2. Push it until you hear a click.Installing the Battery

ENGLISH22Installation Getting StartedCharging the BatteryTo connect the travel adapter to the phone, you must have installedthe battery.1. Insert one end of the travel adapterinto the bottom of the phone.➌2. Connect the other end of the traveladapter to an AC wall outlet.Use only the included packing charger.Warning• Do not force the connector as this may damage the phoneand/or the travel adapter.

ENGLISH23Getting StartedDisconnecting the chargerDisconnect the travel adapter from thephone by pressing its side buttons.➍Notice•The battery delivered with your phone has to be fullycharged before using it.•Do not remove your battery or the SIM card while charging.•“Charging” is displayed on the screen after connecting thetravel adapter. Only if the battery is totally empty, Back lightis on without displaying “Charging”. Please note in thiscase, it may require a longer initial charging time beforedisplaying “Charging” on the screen of the phone.The charging time depends on the charger and the batteryused.•The moving bars of battery icon will stop after chargingcompletely.

ENGLISH24Powering On SequenceGetting StartedTo get started with the phone1. Press and hold Ekey until youhear a tone.2. Depending on setting PIN coderequest, you can enter PIN code ornot.3. If your phone connects to anetwork, the network name will bedisplayed shortly.To turn off the phoneIn standby mode, press and hold Ekey until you hear a tone.➊ ➋

ENGLISH25You can use the access codes described in this section to avoidunauthorised use of your phone. The access codes (except PUK1and PUK2 codes) can be changed by using [Menu 4-5-6]. PIN code (4 to 8 digits)The PIN (Personal Identification Number) code protects your SIMcard against unauthorised use. The PIN code is usually supplied withthe SIM card. When PIN code request is set Enable, your phonewill request the PIN code every time it is switched on. On thecontrary, when PIN code request is set Disable, your phoneconnects to the network directly without the request PIN code.PIN2 code (4 to 8 digits)The PIN2 code, supplied with some SIM cards, is required to accesssome functions such as Advice of call charge, Fixed Dial number.These functions are only available if supported by your SIM card.PUK code (4 to 8 digits)The PUK(PIN Unblocking Key) code is required to change a blockedPIN code. The PUK code may be supplied with the SIM card. If not,contact your local service provider for the code. If you lose the code,also contact your service provider.Access Codes Getting Started

ENGLISH26PUK2 code (4 to 8 digits)The PUK2 code, supplied with some SIM cards, is required tochange a blocked PIN2 code. If you lose the code, also contact yourservice provider.Security code (4 to 8 digits)The security code protects the unauthorised use of your phone. It isusually supplied with the phone. This code is required to delete allphone entries and to activate “Reset settings” menu. The defaultnumber is “0000”.Access Codes Getting Started

ENGLISH27To select a menu in phonebook, press[Names] in standby mode and thenscroll to a desired item.PhonebookAccessing the MenuName Description1 Search Allows you to search for a specific name,number. 2 Add new Allows you to add new names and numbers.3 Speed dials Allows you to assign up to 8 ( 2 - 9 )one-touch dial allocations.4 Voice list Allows you to list phone numbers which isattached voice.5 Caller groups Allows you to show group list.6 Copy all Allows you to copy entries from your Phonememory to SIM card or from SIM card toPhone memory.7 Delete all Allows you to erase all the data in either yourphonebook or the SIM card to the phonememory. 8 Settings Allows you to set the memory and to searchitem by Variable, name and number.9 Information Allows you to check the status of memory,SDN (Service Dial Number), and Ownnumber list.Name Description

ENGLISH28Menu TreeAccessing the Menu1 Messages1 Write short message2 Write multimedia message3 Inbox 4 Outbox5 Voice mail6 Info service7 Templates8 Settings2 Call Register 1 Missed calls2 Received calls3 Dialled calls4 All calls list5 Delete recent calls6 Call charge7 GPRS information3 Profiles1 Vibrate only2 Quiet3 General4 Loud5 Headset6 Car4 Settings1 Alarm clock2 Date & Time3 Phone settings4 Call settings5 Security settings6 Network settings7 Reset settings

ENGLISH295 Organizer1 Scheduler2 Phone book6 Fun & Tools1 Calculator2 My folder3 Game4 Unit converter5 World time7 WAP services1 Home2 Bookmarks3 Push messages4 Profiles5 Go to URL6 Cache settings7 Security certifications8 Reset profiles8 Java 1 Applications2 Memory status3 DownloadAccessing the Menu

ENGLISH30This menu includes functions related to SMS (Short MessageService), MMS (Multimedia Message Service), voice mail, as well asthe network’s service messages.Write short message [Menu 1-1]You can write and edit text messages, checking the number ofcharacters.1. Enter Messages then select Write short message.2. To write a message, use T9 text. For details, see How to use T9(Page 31).3. Press [Insert] to attach the followings.4. When you finish writing, press [Options].Insert• SymbolYou can add special characters.• PictureYou can insert the Default pictures or pictures in My folder thatare available for short messages.• SoundYou can insert sounds that are available for short messages.• Text templatesYou can use Text templates already set in the phone.Messages [Menu 1]Accessing the Menu

ENGLISH31Accessing the Menu• PhonebookYou can add phone numbers or e-mail addresses in Phonebook.• Business cardYou can add your contact information to the message.Options• SendSends text messages.1. Enter numbers of recipient.2. Press Dkey to add more recipients.3. You can add phone numbers in the phone book.4. Press <after entering numbers.• SaveStores messages in Outbox.• FontYou can select Size and Style of fonts.• ColourYou can select Colour of foreground and background.• AlignmentYou can make the message contents aligned Right, Centre orLeft.

ENGLISH32Messages [Menu 1]Accessing the Menu• Add T9 dictionaryYou can add your own word. This menu can be shown only whenedit mode is Predictive (T9Abc/T9abc/T9ABC).• T9 langaugesSelect a T9 input mode.• ExitIf you press Exit while writing a message, you can end the writingmessage and back to the Message menu. The message you havewritten is not saved.Write multimedia message [Menu 1-2]You can write and edit multimedia messages, checking messagesize.1. Enter the Messages menu by pressing < [Select].2. If you want to write a new message, select Write multimediamessage.3. You can create a new message or choose one of the multimediamessage templates already made.4. Press Insert to add Symbol, Picture, Sound, Text templates,Phonebook or Business card.

ENGLISH33Accessing the MenuOptions• PreviewYou can preview multimedia messages you wrote.• SendYou can send multimedia messages to multiple recipients, prioritiseyour message, and make it sent later as well.• SaveYou can save multimedia messages in the outbox or as templates.• Add slideYou can add a slide before or after current slide.• Move to slideYou can move to previous or next slide.• Delete slideYou can delete current slides.• Set slide format- Set timerYou can set timer for slide, text, picture and sound.- Swap text and pictureYou can switch the position of picture and text of the message.

ENGLISH34Messages [Menu 1]Accessing the Menu• Add T9 dictionaryYou can add your own word. This menu can be shown onlywhen edit mode is Predictive (T9Abc/T9abc/T9ABC).• T9 langaugesSelect a T9 input mode.• ExitYou can back to the Message menu.

ENGLISH35Accessing the MenuHow to Use T9T9 allows you to input text quickly.In T9, you only need to press the key with the correspondingletter once. This is based on a built-in dictionary to which youcan also add new words.• Writing words by using T9.1. Start writing a word by using the keys 2to 9. Press each key only once for one letter.To write for instance ‘Girl’.The word changes after each keystroke. Therefore youshouldn’t pay too much attention to how the word appearson the display until you have pressed all the appropriatekeys.160 1 159 1 158 1157 1 156 14 (For g) 4 (For i)7 (For r) 5 (For l)

ENGLISH36Messages [Menu 1]Accessing the MenuTo delete a character to the left, press C.To insert several numbers, hold # down and key in thenumbers.If you hold * down, you can change the type oflanguage. (You can also use options.)Also, the phone supports three modes: Predictive(T9Abc, T9ABC, T9abc), Multitap (ABC, abc), Numeric(123). If you want to change a mode, press # key.Alternatively : Press * key and select insertsymbols. Select the desired characterand press Select.2. When you have finished wirting a word, check whether theword is correct.If the word : Press 0and write the next word.is correctIf the word is : Search by U, D(Previous andnot correct Next word).Alternatively : If there is no word you want you canadd your own word. Press <[Options] in the Predictive edit mode.Select Add T9 dictionary Menu. You can see the following.

ENGLISH37Accessing the MenuLGGSM3. To insert a punctuation mark, press 1repeatedly untilthe desired mark appears.T9 languages• You can select T9 Languages by selecting Menu. In T9 mode, you can also select T9 Off menu.(Default is T9 On)Input yourword➭

ENGLISH38Messages [Menu 1]Accessing the MenuInbox [Menu 1-3]You will be alerted when you have received messages. They will bestored in Inbox.In Inbox, you can identify each message by icons. For detail, see theicon directive.If the phone shows ‘No space for SIM message’, you have to deleteany SIM messages from inbox or outbox. If the phone displays ‘Nospace for message’, you can make space of each repository asdeleting messages, media and applications.❇SIM messageSIM message means the message exceptionally stored in SIMcard.For notified multimedia message, you have to wait for downloadingand processing of the message. For notification setting, see [Menu1-8-2] for detail.To read a message, select one of the messages by pressing <.Icon directive[ ] Multimedia message[ ] Short message[ ] SIM message[ ] Read[ ] Notified multimedia message

ENGLISH39Accessing the MenuReplyYou can reply to the sender.ForwardYou can forward the selected message to another party.Return callYou can call back to the sender.DeleteYou can delete the current message.ExtractYou can extract picture, sound and text. They will be saved in Myfolder or Phonebook.View informationYou can view information about received messages; Sender'saddress, Subject (only for Multimedia message), Message date &time, Message type, Message size.

ENGLISH40Messages [Menu 1]Accessing the MenuReplay (applicable to Multimedia message only)You can replay multimedia messages.❇ Receive (In case of notification message)If Multimedia message is set to Auto download off, you can getonly Notification. To receive a message, you need to select[Receive]. Although Mulimedia message is set to Autodownload on, on the network condition or other reasons, you canget notification message.Outbox [Menu 1-4]When you have sent a message, you can see the sent message listincluding delivery report.❇When you use the message which is already sentEditYou can edit the selected message.SendThe selected message is to be sent.Icon directive[ ] Sent[ ] Unsent[ ] Delivery confirmed

ENGLISH41Accessing the MenuDeleteThe selected message is deleted.View informationShows whether the message was sent, unsent or deliveredsuccessfully.Voice mail [Menu 1-5]Listen to voice mail You can listen to voice mail.Voice mail centre You can get the voicemail if this feature is supported by the networkservice provider. When new voicemail is arrived, the symbol will bedisplayed on the screen. Please check with your network serviceprovider for details of their service in order to configure the handsetaccordigly.1. Hold down < key in standby mode.2. You can check the following submenus.• Home The number dialed on the home network to listen to voicemail.• RoamThe number dialed when other networks to listen to voicemail.

ENGLISH42Info service [Menu 1-6](Dependent to network and subscription)Cell Broadcast messages (CB Message) are text messages by thenetwork to GSM phone users. They provide general information suchas weather reports, traffic news, taxis, pharmacies, and stock prices.Each type of information has the number; therefore, you can contactservice provider. When you receive CB message, you can read itfollowing sequence:Read1. When you receive CB message, it will be displayed on the screen.You can read the message by scrolling U, D .2. After reading the message, press Eto return to the standbymode. In addition, you can save it until another message isreached.ReceiveAllows you to receive Cell broadcast messages. AlertAllows you to alert by beep when you receive Cell broadcastmessages.Languages You can select the language you want. Then, the cell broadcastmessage will be shown in the language that you selected.Messages [Menu 1]Accessing the Menu

ENGLISH43Topics (Dependent to network and subscription) • Add newYou can add the CB message category in the Phone memory withits nickname.• View listYou can see the CB message category which you added. If youpress [Options], you can edit and delete CB message categorywhich you added.• Active listYou can select the CB message category in the active list bypressing [On/Off].Templates [Menu 1-7]You can see 11 predefined messages in the list and save 6templates before you edit. You can also change them. The othersare <Empty>.Text Allows you to edit predefined messages.Accessing the Menu

Multimedia Allows you to edit predefined Multimedia messages. You can use the following option for Text and Multimedia.Edit : You can edit multimedia templates.Add new : Allows you to add new multimedia templates.Write message: You can write multimedia messages usingmultimedia templates.Delete : You can delete multimedia templates.Business card Settings [Menu 1-8]Short message • Message type Text, Voice, Fax, Natl. paging, X.400, E-mail, ERMESUsually, the type of message is set to Text. You can convert yourtext into alternative formats. Contact your service provider for theavailability of this function.• Validity periodThis network service allows you to set how long your textmessages will be stored at the message centre.ENGLISH44Messages [Menu 1]Accessing the Menu

• Delivery report If you set Yes in this menu, you can check whether your messageis sent successfully or not.• Reply via same service centre When a message is sent, it allows the person to whom you sent themessage to reply and charges the cost of the reply to yourtelephone bill.• SMS centre If you want to send the text message, you can get the address ofSMS centre through this menu.Multimedia message • Validity period This network service allows you to set how long your textmessages will be stored at the message centre.• Delivery reportIf you set Yes in this menu, you can check whether your messageis sent successfully or not.• Auto download If you select ‘on’, you receive multimedia messages automatically.If you select ‘off’, you receive only notification message in inboxand then you can check this notification.If you select “confirm”, you can be aware of arriving notification bypop-up message.ENGLISH45Accessing the Menu

ENGLISH46• Network settings If you select multimedia message server, you can set IP addressfor multimedia message server.• Permitted message types Personal : Persornal message.Advertisements : Commercial message.Information : Necessary information.Memory status You can check how many free and in-use are in the SIM memory orthe Phone memory.Messages [Menu 1]Accessing the Menu

ENGLISH47Missed calls [Menu 2-1]This menu shows recently missed numbers. You can call by thisnumber, also save and view date and time this menu as well aswriting messages.Received calls [Menu 2-2]This menu shows recently received numbers. You can call by thisnumber, also save and view date and time, as well as writingmessages.Dialled calls [Menu 2-3]This menu shows recently dialed numbers. You can call by thisnumber, also save and view date and time, as well as writingmessages.All calls list [Menu 2-4]You can save the phone number and check the date and time for acall. Moreover, you can call back to the other party, as well as writingmessages.Delete recent calls [Menu 2-5]You can delete the all call records.Call Register [Menu 2]Accessing the Menu

ENGLISH48Call Register [Menu 2]Accessing the MenuCall charge [Menu 2-6]Within these submenus, you can view the duration and the call costof your calls.Call duration This function allows you to view the duration of your Last Call, AllCalls, Received calls and Dialled calls in hours, minutes andseconds. You can also reset the call timers.Show call costs This function allows you to check the cost of your last call, all calls,remaining and reset the costs. To reset the cost, you need the PIN2code.Note• The actual call cost may be different depending on networkfeatures, billing, and tax.

ENGLISH49Accessing the MenuSettings [SIM Dependent]• Set tariff You can set the currency type and the unit price. Contact yourservices providers to obtain charging unit prices. To select thecurrency or unit in this menu, you need the PIN2 code. • Set credit This network service allows you to limit the costs of your calls byselected charging units. If you select Read, the number ofremaining unit is shown. If you select Change, you can changeyour charge limit. • Auto display This network service allows you to see automatically cost of yourlast call. If you select Yes in Auto display menu, you can see thelast cost when the call is released. Note• When all units have been used, no calls can be madeexcept emergency calls. Depending on SIM card, you needthe PIN2 code to set a call cost limit.

ENGLISH50Call Register [Menu 2]Accessing the MenuGPRS information [Menu 2-7]You can check the amount of data transferred over the networkthrough GPRS. In addition, you can also view how much time youare online.Call duration You can check the duration of GPRS call. You can also reset the calltimers.• Last call• All calls• Reset Data volume You can check the data volume.• Sent• Received• All• Reset all

Profiles [Menu 3]Accessing the MenuCar [Menu 3-6]You can adjust the Profiles as Car when you activate Handsfree Kit.A Group of Profiles submenus Profiles menu have the submenus as shown below.Incoming alert typeAllows to alert for the incoming call for adjusting environment.Ring tone Allows to set the ringing tone for adjusting environment.Ring volume Allows to set the ring volume for adjusting environment. Message alert type Allows to alert when receiving a message for adjusting environment:Ring once, Vibrate, Silent.Key/Effect volumeAllows to set the Key volume and effect volume for adjustingenvironment. Keypad toneAllows to set the keypad tone for adjusting environment.ENGLISH52

ENGLISH53Accessing the MenuAuto answer Allows to set to answer automatically for adjusting environment.Please note that only Car and Headset has this sub menu so thatyou can activate this function.• OffEven though your phone is ringing, your phone will not answerautomatically.• After 5 secsAfter 5 seconds your phone will answer automatically.• After 10 secsAfter 10 seconds your phone will answer automatically.Note• If you set the Handsfree kit to the phone, you can’t activatethe vibration related with Incoming alert or Message alertmenu. Therefore, in Handsfree menu, you can view thefollowing submenus;- Incoming alert : Ring, Silent- Message alert : Ring Once, Silent

ENGLISH54You can set the following menus for your convenience andpreferences.Alarm clock [Menu 4-1]You can set the alarm to go off at a specified time.1. Select On and enter the alarm time you want.2. Select the repeat period : Once, Mon~Fri, Mon~Sat, Everyday.3. Select the alarm tone you want and press [OK].4. Edit the alarm name and press [OK].5. If you set Alarm clock to Power off alarm, the alarm goes offat a specified time despite the phone is switched off.Date & Time [Menu 4-2]You can set functions relating to the date and time.Date • Set dateYou can set the date of your phone.• Date formatYou can set the Date format. Settings [Menu 4]Accessing the Menu

ENGLISH55Accessing the MenuTime The phone has its own clock. In this menu you can set the time andselect between the 12-hour or 24-hour time formats. • Set time: You can set time of your phone in this menu. • Time format: Your can select time format between 12-hour or 24-hour.Phone settings [Menu 4-3]You can set functions relating to the phone.Display settings • Screen saver You can set screen saver.• Call You can set the animation as making a call.• Wallpaper You can select background picture in a standby mode.

ENGLISH56• Greeting note If you select yes, this menu allows you select the standby display.In text mode, you can edit the text.• Backlight You can set the light-up duration you want whenever you press akey.• LCD contrast You can set the brightness of LCD you want bypressing U , D .Languages You can select the language will be displayed. Settings [Menu 4]Accessing the MenuLCD contrast

ENGLISH57Accessing the MenuCall settings [Menu 4-4]You can set the menu relevant to a call by pressing [Select] inSetting menu.Call divert The Call divert service allows you to divert incoming voice calls, faxcalls, and data calls to another number. For details, contact yourservice provider.• All voice calls Diverts voice calls unconditionally.• If busy Diverts voice calls when the phone is in use.• If no reply Diverts voice calls which you do not answer.• If out of reach Diverts voice calls when the phone is switched off or out ofcoverage.• All data calls Diverts to a number with a PC connection unconditionally.• All fax calls Diverts to a number with a fax connection unconditionally.

ENGLISH58Settings [Menu 4]Accessing the Menu• Cancel all Cancels all call divert service.• The submenus Call divert menus have the submenus as shown below.- Activate Activating the corresponding service.To other number Inputs the number for diverting.To favorite number You can check 5 diverted numbers.To voice mail Forwards to message centre. This function doesn’t include Alldata calls and All fax calls menus.- Cancel Deactivating the corresponding service.- View status Viewing the status of the corresponding service. Shows the statusof Call waiting.

ENGLISH59Accessing the MenuAnykey answer • On If you select this menu, you can receive a call by pressing any keyexcept Ekey.• Off If you select this menu, you can receive an incoming call by onlypressing Skey. Send my number (network and subscription dependent)• On If you select this, you can send your phone number to the otherparty. That is, your phone number will be displayed on receiver’sphone. • Off If you select this, you can’t send your phone number.Note• How to use Handfree portable:If you want to use the handsfree portable(earphone), pleasepress the button # for a long time after inserting it to theconnector when incoming a call.

ENGLISH60Settings [Menu 4]Accessing the MenuCall waiting (network dependent)If this service is Enable, you can accept a waiting (incoming) call. • On Activating the corresponding service.• Off Deactivating the corresponding service.• View statusChecking the Status of the service.Minute minder If you select On, you can check the call duration by beep soundevery minute during a call.Auto redial • On When this function is set on, your phone will make up to 10attempts for a call after not connecting.• Off Your phone will not make any attempts to connect the call after notconnecting.

ENGLISH61Accessing the MenuSelect line This function is only used if Alternate line service supported by theService Provider. Two independent phone numbers are registeredfor the phone. This function provides you with the selection thecurrently used phone number. If this function is supported by yourservice provider, the following menu will be displayed.• Line 1 : Select Line 1 as the current phone number.• Line 2 : Select Line 2 as the current phone number.Security settings [Menu 4-5] PIN code request In this menu, you can set the phone to ask for the PIN code of yourSIM card when the phone is switched on. If this function is activated,you’ll be requested to enter the PIN code.1. Press [Menu] in standby mode.2. Press 4key for direct access or use U and D to enterSettings. 3. Scroll to highlight Security settings menu.4. Select PIN code request by pressing [Select].5. You can view the following submenus. • On : Enable PIN code request.• Off : Disable PIN code request.

ENGLISH62Settings [Menu 4]Accessing the MenuPhone lock You can use security code to avoid unauthorized use of your phone.When you switch on your phone, your phone will request securitycode always if you set phone lock to “On”. If you set phone lock to“Automatic”, your phone will request security code only when youchange your SIM card.• On• Off• AutomaticAutomatic key lock When you enable Automatic key lock, keypad will be lockautomatically on an idle screen after 25 seconds without any keyrequesting.• On• OffNote• If you want to lock your phone keypad manually, enter Topmenu and press *key.• If you want to unlock your phone keypad, press <[unlock] key and then press *key. But if you enabledAutomatic key lock before, your phone keypad will beunlock and then after 25 seconds the keypad will be lock upagain automatically.

ENGLISH63Accessing the MenuCall barring The Call barring service prevents your phone from making orreceiving certain category of calls. This function requires the callbarring password. You can view the following submenus. • All outgoing : The barring service of all outgoing calls.• International [Outgoing international] :The barring service of all outgoing international calls.• International except home [Outgoing international when roam] : The barring service of all international outgoing calls except homenetwork.• All incoming : The barring service of all incoming calls.• Incoming when abroad : The barring service of all incoming calls when abroad.• Cancel all : You can cancel all barring service.• Change passwd : You can change the password for Call Barring Service.

ENGLISH64Settings [Menu 4]Accessing the MenuFixed dial number (SIM dependent)You can restrict your outgoing calls to selected phone number. Thenumbers are protected by your PIN2 code.• Activate You can restrict your outgoing calls to selected phone number.• CancelYou can call without restricting phone number.• Number listYou can view the number list saved as Fixed dial number. Change codes You can change the access codes : PIN, PIN2, Security code.Network settings [Menu 4-6]You can select the network which you will be registered eitherautomatically or manually. Usually, the selection of the network usedby the handset is automatic. Automatic The phone automatically selects network which is available in thearea.

ENGLISH65Accessing the MenuManual The phone will find the list of available networks and show you them.Then you can select the network which you want to use if thisnetwork has a roaming agreement with your home network operator. Preferred You can set a list of preferred networks the handset should attemptto register with first, before attempting to register to any othernetworks. This list is created from the handset’s predefined list ofknown networks.User defineYou can add entries or delete new ones from the network list. This can even include new networks whose network codes are notknown to the handset. To do this, select and then enter the networkcode, country code and network name.Reset settings [Menu 4-7]You can set the handset to the default configuration by selecting thismenu. In addition, you need Security code to activate this function.

Organizer [Menu 5]Accessing the MenuScheduler [Menu 5-1] On top of the screen there are sections for date and icons.Whenever you change the date, the calendar will be updatedaccording to the date. And square cursor will be used to locate thecertain day. If you see under bar on the calendar, it means that thereis a schedule that day. This function helps to remind you of yourschedule and memo. The phone will sound an alarm tone if you setthis for the note.For changing the day, month, and year.Add new You can edit maximum 30 characters. You can take a note. You canchoose the following types of note. You can make up to maximum 20notes. • Schedule Input the subject, the schedule time, the repeat time, alarm time bypressing [Select].• Memo 1. Select Add New by pressing [Select].2. Scroll to highlight Memo.3. Press [Select].4. Input the memo and then press [Select].1 3* #UDKey Description Key DescriptionYearlyMonthlyIf you press these keys shortly,you can set the alarm daily. In case of pressing for a longtime, you can set it weekly.ENGLISH66

ENGLISH67Accessing the MenuView day Shows the note for the chosen day. Use U , D to browse throughthe note lists. If you set alarm for the note, Alarm watch is displayed.Press [Options] to delete, edit the note you selected.View all Shows the notes that are set for all days. Use U , D to browsethrough the note lists. You can use the same menu as “View date” by pressing [Options].Delete past You can delete for the last schedule already is notified you.Delete all You can delete for the all note(s).Phone book [Menu 5-2]Search (Calling from phonebook) 1. Open the phonebook first by pressing [Names] in a standbymode.2. Search by Pressing [Select] to enter.

ENGLISH68Organizer [Menu 5]Accessing the Menu3. Depending on setting Search by, the below menu may notappear.• Name• Number4. You can find an entry by name and number.5. Select [Search]. 6. You can check the names and numbers by pressing [List].7. If you want to edit, delete, copy an entry, or to add the voice toone, select [Options]. The below menu will be displayed.• Edit : You can edit the name, number, E-mail, and faxby pressing [OK].• Delete : You can delete an entry.• View other : You can see other phone numbers in namesnumber you searched. • Write message: You can write message.• Copy : You can copy an entry from SIM to phone orfrom phone to SIM.• Call : You can call thru the chosen entry.• Voice : You can add the voice to the entry or changethe voice tag.• Main number : You can select the one out of mobile, home,office that you often use. The main number willbe displayed first, if you set this.

ENGLISH69Accessing the MenuAdd new You can add phonebook entry by using this function. Phone memory capacity is 200 entries. SIM card memory capacitydepends on the service provider. You can also save 20 characters of name in the Phone memory, andyou can save characters in the SIM card. The number of character isSIM dependent feature.1. Open the phonebook first by pressing [Names] in standby mode.2. Scroll to highlight Add new, and press [Select] to enter.3. Select the memory you want to save: SIM or Phone.• SIM : You can add name and number for entry.a. Write a name to add.b. Press [OK], then you can input a number.c. Press [OK].d. If you want to add the voice, press [Yes].• Phone : You can add name, mobile, home, office, fax no. andE-mail address.a. You can select among mobile, home and office bypressing [select].b. Write a name to add.c. Enter the numbers following as mobile, home, officeby pressing [Next] for next step [Clear] for canceland Cfor saving or exit.d. If you want to add the voice, press [Yes].You should speak a word within 2 seconds, and the phone asks youto speak it again to ensure the accuracy of voice recognition. Aftervoice recognition has finished, Voice is attached automatically.

Speed dials You can associate any of the keys 2 to 9 with a Name list entry. You can call directly by pressing this key for 2-3 seconds. 1. Open the phonebook first by pressing [Names] in a standbymode.2. Scroll to Speed dials, then press [Select] to enter this menu.3. Every Speed dials will be displayed.4. If you want to add Speed dials, select <Empty>. Then, you cansearch the name in phonebook.5. If you select allocated name by Speed dials, you can viewfollowing the submenus.• Change : You can change the allocation of Speed dialsnumber. • Cancel : You can cancel the allocated Speed dials number.ENGLISH70Organizer [Menu 5]Accessing the MenuNote• The voice can only be attached to main number which youset. For example, if you change main number voice will beautomatically attached changed number.• You can add voice tag to phone number in SIM card. The voice tag can be erased removing or changing SIM card.And voice tag attached to phone number in SIM card may beattached to another phone number when you changed SIMcard. Why? The answer is that SIM card doesn’t containinformation about voice tag.

ENGLISH71Accessing the MenuVoice list You can see all phone numbers which contain voice. You can alsocall directly by pressing [Send]. After selecting phone number byusing U and D press [Options], you can see following thesubmenus.• Play You can play voice which is attached to phone number.• ChangeYou can change voice which is attached to phone number.• Delete You can delete voice which is attached to phone number.• Call You can call by selecting this menu.Caller groups You can list up to 20 members per one group. There are 7 groupsyou can make lists to.1. Press [Names] to enter into the phonebook in standby mode.2. Scroll to Caller groups item then press [Select] to enter thismenu.3. Every Group list will be displayed.: Family, Friend, Colleague,VIP, Group1, Group2 and Others.4. Select Group name that you want to manage by pressing [Select].

ENGLISH72Organizer [Menu 5]Accessing the Menu5. Then submenus below will be displayed.• View member-You can view the number list in Caller groups.-You can select the member you want by pressing [Options]then you can enable the submenu such as Edit, Delete, Writemessage, Copy, Voice and Main number.• Group ring toneYou can set the ring tone depending on Group.• Group animationYou can set the animation for each group.• Add memberYou can add the member in Caller groups.1. Scroll to highlight Add member, and then press [Select] toenter.2. The group member souldn’t be exceeded 20. Otherwise, theerror message will be displayed.3. Press [OK] to add member.• Delete memberYou can delete the member already saved in phonebook.• RenameYou can change group name.

ENGLISH73Accessing the MenuCopy all You can copy/move entries from SIM card memory to Phonememory or from Phone memory to SIM card memory.1. Open the phonebook first by pressing [Names] in standby mode.2. Scroll to Copy all, then press [Select] to enter this menu.3. Then submenus below will be displayed.• SIM to Phone : You can copy the entry from SIM Card to Phonememory. • Phone to SIM : You can copy the entry from Phone memory toSIM Card.Delete all You can delete all entries in SIM, Phone, and Voice. This functionrequires Security code.1. Press [Names] to enter into the phonebook in standby mode.2. Scroll to Delete all, then press [Select].3. Then select a memory to erase: SIM, Phone, Voice.4. And then you will be requested to enter Security code.5. Press [OK] or, press [Back] to cancel.Settings You can set preferred memory which includes Variable, SIM orPhone and preferred search which includes Variable, Name andNumber.

ENGLISH74Organizer [Menu 5]Accessing the Menu1. Open the phonebook first by pressing [Names] in a standbymode.2. Scroll to Settings, then Press [Select] to enter.3. Then submenus below will be displayed.• Set memory1. Scroll to highlight Set memory, then press [Select] to enter. 2. The three submenus are displayed.- Variable : If you select Variable, the phone asks youwhere to store whenever you add entries inPhonebook.- SIM : If you select SIM, the phone stores entries toSIM directly without asking you where to store.- Phone : If you select Phone, the phone stores entries toPhone directly without asking you where tostore.• Search by1. Scroll to highlight Search by, then press [Select] to enter.2. The three submenus are displayed. - Variable : If you select Variable, the phone asks you howto search the entries.- Name : If you select Name, the phone searches entriesby name.- Number : If you select Number, the phone searchesentries by number.

ENGLISH75Accessing the MenuInformation • Service dial numberUse this function to access a particular list of services provided byyour network operator (if supported by the SIM card).• Memory status This feature allows you to see how many freeand in-use are in your phonebook.• Own number (SIM dependent)You can check your own number in SIM card.

ENGLISH76Fun & Tools [Menu 6]Accessing the MenuCalculator [Menu 6-1]This contains the standard functions such as +, –, *, ÷: Add,Subtract, Multiply, Divide.1. Input the numbers by pressing numeric keys. 2. Press U key once for Add and long press for Multiply. PressD key once for Subtract and long press for divide. 3. Press *key to input Prime number and #key to inputNegative number. 4. You can view the result by pressing [Result] key. 5. If you want to continue the calculation, repeat the process. 6. You can delete the number or sign you want by pressing C. 7. Press E key if you want to end the calculation process.My folder [Menu 6-2]All the contents downloaded through M-service or EMS such asimages, ringtones and etc, are available in the My folder menu.In this menu you can check the contents, edit their name and,eventually, set them as wallpapers or ringtones. Downloaded polyphonic ringtones must be activated in this menu inorder to make them available in the audio profiles ringtones list. Youcan activate just one downloaded ringtone at once.NoteYou can also attach this objects in an EMS message asdescribed in the Write SMS chapter [Menu 1-1].

ENGLISH77Accessing the MenuGame [Menu 6-3]The phone offers you enjoyable games to play with.NoteThe Control keys are different for each game. But each gamehas screens to explain the main control key (see key info.).Other common control keys are below. [Common Key Function]• <[Soft 1 Key] : Start game, and Ok key• C[CLR] : Pause• >[Soft 2 Key] : Back• E[END] : Exit• 0 ~ 9 : Stage and level control.• U ,D[Up,down key] : Volume control• * [Star key] : Navigation to the left• # [Sharp key] : Navigation to the right

ENGLISH78Unit converter [Menu 6-4]This converts any measurement into a unit youwant. There are 4 types that can be convertedinto units: Length, Area, Weight, and Volume.1. You can select one of four unit types bypressing [Next] key.2. Select the unit you want to convert bypressing U and D . 3. You can toggle between Current and Convert by long pressingU and D .4. You can input the prime number after the decimal place bypressing #.5. You can delete the number you want by pressing C.6. Press Ekey or [Back] key if you want to end the process forconverting the value.World time [Menu 6-5]You can view the time for each city around the world.when you press U , D shortly, you can view the city belonged tothe different time zone and when you press U , D long, you canview the all of city on the same time zone. If you want to select the country you want, press [set] key.Fun & Tools [Menu 6]Accessing the MenuLength

ENGLISH81Accessing the Menu- Conn. security The options are On and Off depend on the gateway you areusing.- Gateway informationMost of WAP gateways do not require a User ID and Password. If your gateway need them to connect to it, then your networkshould provide them, and you must set them up correctly beforetrying to browse a WAP site.- Bearer DataGPRS- Data settings The service settings are only available when Data is chosen as abearer service.These values of setting are provided by your network.IP address : Enter the IP address of the WAP gateway you areusing to access.Dial number : Enter the telephone number to dial to access yourWAP gateway.Call type : Select the type of data call.: Analogue or ISDN(Digital).Call speed : The speed of your data connection.User ID : The user identity for your dial-up server (and NOTthe WAP gateway). Password : The password required by your dial-up server(and NOT the WAP gateway) to identify you.

ENGLISH83Accessing the MenuCache settings [Menu 7-6]You can remove the contents of Cache memory and change theCache check mode.Clear cache The contents of Cache memory will be removed.Check cache You can change the time for checking the Cache memory.• Always The cache is always checked whenever URL is loaded ornavigated.• Start only The cache is only checked when the WAP is started.• Off The cache is never checked.Security certifications [Menu 7-7]A list of the available certificates is shown.Reset profiles [Menu 7-8]You can reset all the current settings of profiles to the factory default.

ENGLISH84Java [Menu 8]Accessing the MenuApplications [Menu 8-1]Java Menu OptionsScroll to an application and select Options.1. Open : Launches the selected MIDlet.2. Delete : Deletes the selected MIDlet.3. Update : Accesses the server and updates the selectedMIDlet.4. Information : Displays information about the selected MIDlet.5.Phone settings: Allows you to set backlight and sound for javagame.JAVA™is a trademark of Sun Microsystems, Inc.

ENGLISH85Accessing the MenuMemory status [Menu 8-2]Shows the size of memory available for game and applicationinstallations. You can also see the whole memory status of Handset.Download [Menu 8-3]See [Menu 7-2]. You can edit and set MIDlet server address.Download MIDlets using WAP Browser and store them in the phone.You can also view the list of MIDlets stored on the Applicatonsscreen.Download server address:

ENGLISH86If you are on line, you can see the following menus.❏ HomeThis is the same as [Menu 7-1].❏ ReloadThis reloads the current page.❏ BookmarksThis is the same as [Menu 7-2].❏ Save as bookmarksSave the current URL as a bookmark. You can also edit thebookmark title.❏ Go to URLSame as [Menu 7-5].❏ Go to e-mail serverConnect to the E-mail server that you configured.❏ Set as e-mail serverSave the current URL as an E-mail server.❏ Save imageSave the browsed image.Internet On-line menuAccessing the Menu

ENGLISH87How to Use Data and Fax callAdditional FunctionsTo be able to data or fax service, you need the communicatesoftware such as a data or a fax program. Before using thesefunctions, you need to connect your phone to a computer or makesure that your phone is in connection with a compatible device.Sending Data or Fax Calls1. Connect your computer to the phone.2. After starting the communicate software, make a call and transmita data or fax.3. After the data or fax transmission, you can end the call by justending of the communicate software, pressing [End].Receiving Data or Fax CallsIf you have separate numbers for voice, data and fax calls, yourphone recognizes the type of call.Receiving Data or Fax Calls – Separate numbers (Multi-numbers)To use a data or a fax service, the display shows which type of callyou are receiving.To receive a data or fax call.1. Connect your computer to the phone.2. After starting the communicate software, accept a call and receivea data or fax (if it is not answered automatically).3. After the data or fax reception, you can end the call by just endingof the communicate software, pressing [End].

ENGLISH88How to Use Data and Fax callAdditional FunctionsReceiving Data or Fax Calls – Single numberIf you have a SIM card that does not support separate voice, dataand fax numbers, the phone does not recognize the type of incomingcall.To use a data or a fax service, make sure that you want to receive adata or fax call mode. You first have to set the phone to one of theseoptions in the call mode (Settings ➝ Call Setting ➝ Next Incoming)sub menu.To receive a data or fax call.1. Press [Menu] in standby mode.2. Select the call type you want (Voice, Data or Fax) and press[Select].3. Connect your computer to the phone.4. After starting the communicate software, accept a call and receivea data or fax (if it is not answered automatically).5. After the data or fax reception, you can end the call by just endingof the communicate software, pressing [End].Once you have set your phone for a specific incoming call, it remainsset until you change it.PC SyncPC Sync is a program for data exchange PC & Phone by datacable. Therefore, if you want to use this function, you have tobuy accessory kit. About more detail for using guide refers toPC Sync Help file on the PC Sync CD.

ENGLISH89During a call, the following menus will be displayed, not in a standbymode.1 During a call1-1 Putting a Call on HoldYou can place a call on hold or retrieve by just pressing the [Send]key. When a call is made or answered, press the [Send] key to placeit on hold. When a call is held, press the [Send] key to make it active.1-2 Making a Second CallYou can get a dial number from phonebook to make a second call. Press [Names] key then select Search. To save the dial number intophonebook during call, press [Names] key then select Add new.1-3 Swapping Between Two CallsTo switch between two calls, select the [Options] key, then selectSwap or just press [Send] key.You can make one of two calls focused by pressing up/down arrowkey. If you want to end one of two calls, make the call you want toend focused, then press [End] key when the call you want to end isfocused.In call Menu Additional Functions

ENGLISH901-4 Answering an Incoming CallTo answer an incoming call, simply press the [Send] key.The handset is also able to warn you of an incoming call while youare already in a call. A tone sounds in the earpiece, and the displaywill show that a second call is waiting. If Call Waiting is on, you can put the first call on hold and answer thesecond, by pressing [Send] or by selecting the [Answer] key.You can end the current call and answer the waiting call by selectingthe [Menu] key, then End & Answer. 1-5 Rejecting an Incoming CallYou can reject an incoming call without answering by simplypressing the [End] key.When in a call you can reject an incoming call (1st call) by pressingthe [Menu] key and selecting Multiparty/End and Answer or bypressing [End] key.1-6 Controlling the volume during a callYou can control the volume during a call by pressing [Options] keyand selecting Volume followed by U or D . 1-7 Muting the MicrophoneYou can mute the microphone during a call by pressing the [Options]key then selecting Mute. The handset can be unmuted by pressingthe [Unmute].When the handset is muted, the caller cannot hear you, but you canstill hear them.In call Menu Additional Functions

ENGLISH91Additional Functions1-8 Switching DTMF Tones on During a CallTo turn DTMF tones on during a call, for example, to allow yourhandset to make use of an automated switchboard, select the[Options] key, then DTMF On. DTMF tones can be turned off thesame way.1-9 Calling up the messages or SIM Tool KitThe Messages and SIM Tool kit main menu options can be reachedfrom the in-call menu by selecting the [Options] key, then Messagesor SIM Tool Kit (Screen name depends on the network operator’sSIM). SIM Tool kit menu is shown only when SIM in the handsetsupports SIM Tool kit service.2 Multiparty or Conference CallsThe multiparty or conference service provides you with the ability tohave a simultaneous conversation with more than one caller, if yournetwork service provider supports this feature.A multiparty call can only be set up when you have one active calland one call on hold, both calls having been answered. Once amultiparty call is set up, calls may be added, disconnected orseparated (that is, removed from the multiparty call but stillconnected to you) by the person who set up the multiparty call.These options are all available from the in-call menu and are listed inSection.The maximum callers in a multiparty call is five. Once started, youare in control of the multiparty call, and only you can add calls to themultiparty call.

ENGLISH92In call Menu Additional Functions2-1 Making a Second CallYou can make a second call while you are already in a call. To dothis, enter the second number and press [Send]. When you getsecond call the first call is automatically put on hold. You can swapbetween calls by selecting the [Options] key then Swap.2-2 Setting up a Multiparty CallYou can connect a call on hold to the currently active call to form amultiparty call by selecting the [Options] key then Multiparty/Joinall.2-3 Putting the Multiparty Call on HoldTo put a multiparty call on hold, select the [Options] key thenMultiparty/Hold all.2-4 De-activate the Multiparty Call on HoldTo de-activate a multiparty call on hold, select the [Options] key thenMultiparty/Join all.2-5 Adding Calls to the Multiparty CallTo join an active call to the held multiparty call, select the [Options]key then Multiparty/Join all.2-6 Displaying Callers in a Multiparty CallTo scroll through the numbers of the callers who make up amultiparty call on the handset screen, press U and D keys.

ENGLISH93Additional Functions2-7 Putting a Member of a Multiparty Call on HoldTo place one selected caller (whose number is currently displayedon-screen) of a multiparty call on hold, select the [Options] key thenMultiparty/Exclude.2-8 A Private Call in a Multiparty CallTo have a private call with one caller of a multiparty call, display thenumber of the caller you wish to talk to on the screen, then select the[Options] key and Multiparty/Private to put all the other callers onhold.2-9 Ending a Multiparty CallThe currently displayed caller of a multiparty call can bedisconnected by pressing the [End] key. To end a multiparty call,press the [Options] key then select Multiparty/End multiparty.Selecting the [Options] key then Multiparty/End all, will end all theactive and held calls.2-10 Explicit Call Transfer (ECT)If you have one caller on hold and another active call, you mayconnect one call party to another call party and then leave the call.This is done by selecting the Multiparty/Transfer option from the in-call menu.

ENGLISH94There are various accessories for your mobile phone. You can selectthese options according to your personal communicationrequirements.Standard BatteryPortable HandsfreeThis connects to your phone, allowinghandsfree operation.Travel AdapterThis charger allows you to charge thebattery while away from home or your office.Cigar Lighter AdapterYou can operate the phone and tricklecharge the phone's battery from your vehicleby using the cigarette lighter charger.NeckstrapAccessories

ENGLISH95Data Kit/CDYou can connect your phone to PC toexchange the data between them.Handsfree KitThe handsfree car kit enables you to attachthe phone to the power jack in your car,providing you with handsfree operation.Note•Information and specification in this menu is subject tochange without prior notice. •Accessories may be different in different regions; pleasecheck with our regional service company or agent for furtherenquiries.

ENGLISH96TIA Safety InformationProvided herein is the complete TIA Safety Information for WirelessHandheld phones. Inclusion of the text covering Pacemakers,Hearing Aids, and Other Medical Devices is required in the owner’smanual for CTIA Certification. Use of the remaining TIA language isencouraged when appropriate.Exposure to Radio Frequency SignalYour wireless handheld portable telephone is a low-power radiotransmitter and receiver. When it is ON, it receives and also sendsout radio frequency (RF) signals.In August, 1996, the Federal Communications Commissions (FCC)adopted RF exposure guidelines with safety levels for handheldwireless phones. Those guidelines are consistent with the safetystandards previously set by both U.S. and international standardsbodies:ANSI C95.1 (1992) *NCRP Report 86 (1986)ICNIRP (1996)Those standards were based on comprehensive and periodicevaluations of the relevant scientific literature. For example, over 120scientists, engineers, and physicians from universities, governmenthealth agencies, and industry reviewed the available body ofresearch to develop the ANSI Standard (C95.1).*American National Standards Institute; National Council onRadiation Protection and Measurements; International Commissionon Non-Ionizing Radiation ProtectionThe design of your phone complies with the FCC guidelines (andthose standards).Safety Guidelines

Antenna CareUse only the supplied or an approved replacement antenna.Unauthorized antennas, modifications, or attachments could damagethe phone and may violate FCC regulations.Phone OperationNORMAL POSITION: Hold the phone as you would any othertelephone with the antenna pointed up and over your shoulder.Tips on Efficient OperationFor your phone to operate most efficiently:• Antenna is fixed and does not extend. This line is not necessary.• Do not touch the antenna unnecessarily when the phone is in use.Contact with the antenna affects call quality and may cause thephone to operate at a higher power level than otherwise needed.DrivingCheck the laws and regulations on the use of wireless phones in theareas where you drive. Always obey them. Also, if using your phonewhile driving, please:• Give full attention to driving — driving safely is your firstresponsibility;• Use hands-free operation, if available;• Pull off the road and park before making or answering a call ifdriving conditions so require.Electronic DevicesMost modern electronic equipment is shielded from RF signals.However, certain electronic equipment may not be shielded againstthe RF signals from your wireless phone.ENGLISH97

PacemakersThe Health Industry Manufacturers Association recommends that aminimum separation of six (6”) inches be maintained between ahandheld wireless phone and a pacemaker to avoid potentialinterference with the pacemaker. These recommendations areconsistent with the independent research by and recommendationsof Wireless Technology Research. Persons with pacemakers:• Should ALWAYS keep the phone more than six inches fromtheirpacemaker when the phone is turned ON;• Should not carry the phone in a breast pocket.• Should use the ear opposite the pacemaker to minimizethepotential for interference.• If you have any reason to suspect that interference is takingplace,turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearingaids.In the event of such interference, you may want to consult yourservice provider.Other Medical DevicesIf you use any other personal medical device, consult themanufacturer of your device to determine if they are adequatelyshielded from external RF energy. Your physician may be able toassist you in obtaining this information. Turn your phone OFF in health care facilities when any regulationsposted in these areas instruct you to do so. Hospitals or health carefacilities may be using equipment that could be sensitive to externalRF energy.ENGLISH98Safety Guidelines

VehiclesRF signals may affect improperly installed or inadequately shieldedelectronic systems in motor vehicles. Check with the manufacturer orits representative regarding your vehicle. You should also consult the manufacturer of any equipment that hasbeen added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted notices so require.AircraftFCC regulations prohibit using your phone while in the air. Turn yourphone OFF before boarding an aircraft.Blasting AreasTo avoid interfering with blasting operations, turn your phone OFFwhen in a “blasting area” or in areas posted: “Turn off two-wayradio”. Obey all signs and instructions.Potentially Explosive AtmosphereTurn your phone OFF when in any area with a potentially explosiveatmosphere and obey all signs and instructions. Sparks in suchareas could cause an explosion or fire resulting in bodily injury oreven death.Areas with a potentially explosive atmosphere are often, but notalways, marked clearly. Potential areas may include: fueling areas(such as gasoline stations); below deck on boats; fuel or chemicaltransfer or storage facilities; vehicles using liquefied petroleum gas(such as propane or butane); areas where the air contains chemicalsor particles (such as grain, dust, or metal powders); and any otherarea where you would normally be advised to turn off your vehicleengine.ENGLISH99

For Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place objects, includingeither installed or portable wireless equipment, in the area over theair bag or in the air bag deployment area. If in-vehicle wirelessequipment is improperly installed and the air bag inflates, seriousinjury could result.TIA Safety InformationThe U.S. Food and Drug Administration’s Center for Devices andRadiological Health Consumer Update on Mobile Phones.1.Do wireless phones pose a health hazard?The available scientific evidence does not show that any healthproblems are associated with using wireless phones. There is noproof, however, that wireless phones are absolutely safe. Wirelessphones emit low levels of radiofrequency energy (RF) in themicrowave range while being used. They also emit very low levels ofRF when in the standby mode. Whereas high levels of RF canproduce health effects (by heating tissue), exposure to low level RFthat does not produce heating effects causes no known adversehealth effects. Many studies of low level RF exposures have notfound any biological effects. Some studies have suggested thatsome biological effects may occur, but such findings have not beenconfirmed by additional research. In some cases, other researchershave had difficulty in reproducing those studies, or in determining thereasons for inconsistent results.ENGLISH100Safety Guidelines

2.What is the FDA's role concerning the safety of wirelessphones?Under the law, the FDA does not review the safety of radiation-emitting consumer products such as wireless phones before theycan be sold, as it does with new drugs or medical devices. However,the agency has authority to take action if wireless phones are shownto emit radiofrequency energy (RF) at a level that is hazardous to theuser. In such a case, the FDA could require the manufacturers ofwireless phones to notify users of the health hazard and to repair,replace, or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatoryactions, the FDA has urged the wireless phone industry to take anumber of steps, including the following:• Support needed research into possible biological effects of RF ofthe type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF exposureto the user that is not necessary for device function; and• Cooperate in providing users of wireless phones with the bestpossible information on possible effects of wireless phone use onhuman health.The FDA belongs to an interagency working group of the federalagencies that have responsibility for different aspects of RF safety toensure coordinated efforts at the federal level. The followingagencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationENGLISH101

The National Institutes of Health participates in some interagencyworking group activities, as well.The FDA shares regulatory responsibilities for wireless phones withthe Federal Communications Commission (FCC). All phones that aresold in the United States must comply with FCC safety guidelinesthat limit RF exposure. The FCC relies on the FDA and other healthagencies for safety questions about wireless phones.The FCC also regulates the base stations that the wireless phonenetworks rely upon. While these base stations operate at higherpower than do the wireless phones themselves, the RF exposuresthat people get from these base stations are typically thousands oftimes lower than those they can get from wireless phones. Basestations are thus not the subject of the safety questions discussed inthis document.3.What kinds of phones are the subject of this update?The term “wireless phone” refers here to handheld wireless phoneswith built-in antennas, often called “cell”, “mobile”, or “PCS” phones.These types of wireless phones can expose the user to measurableradiofrequency energy (RF) because of the short distance betweenthe phone and the user’s head. These RF exposures are limited byFCC safety guidelines that were developed with the advice of theFDA and other federal health and safety agencies. When the phoneis located at greater distances from the user, the exposure to RF isdrastically lower because a person's RF exposure decreases rapidlywith increasing distance from the source. The so-called “cordlessphones,” which have a base unit connected to the telephone wiringin a house, typically operate at far lower power levels, and thusproduce RF exposures far below the FCC safety limits.ENGLISH102Safety Guidelines

4.What are the results of the research done already?The research done thus far has produced conflicting results, andmany studies have suffered from flaws in their research methods.Animal experiments investigating the effects of radiofrequencyenergy (RF) exposures characteristic of wireless phones haveyielded conflicting results that often cannot be repeated in otherlaboratories. A few animal studies, however, have suggested thatlow levels of RF could accelerate the development of cancer inlaboratory animals. However, many of the studies that showedincreased tumor development used animals that had beengenetically engineered or treated with cancer-causing chemicals soas to be pre-disposed to develop cancer in the absence of RFexposure. Other studies exposed the animals to RF for up to 22hours per day. These conditions are not similar to the conditionsunder which people use wireless phones, so we don’t know withcertainty what the results of such studies mean for human health.Three large epidemiology studies have been published sinceDecember 2000. Between them, the studies investigated anypossible association between the use of wireless phones andprimary brain cancer, glioma, meningioma, or acoustic neuroma,tumors of the brain or salivary gland, leukemia, or other cancers.None of the studies demonstrated the existence of any harmfulhealth effects from wireless phone RF exposures. However, none ofthe studies can answer questions about long-term exposures, sincethe average period of phone use in these studies was around threeyears.ENGLISH103

5.What research is needed to decide whether RF exposure fromwireless phones poses a health risk?A combination of laboratory studies and epidemiological studies ofpeople actually using wireless phones would provide some of thedata that are needed. Lifetime animal exposure studies could becompleted in a few years. However, very large numbers of animalswould be needed to provide reliable proof of a cancer promotingeffect if one exists. Epidemiological studies can provide data that isdirectly applicable to human populations, but 10 or more yearsfollow-up may be needed to provide answers about some healtheffects, such as cancer. This is because the interval between thetime of exposure to a cancer-causing agent and the time tumorsdevelop — if they do — may be many, many years. Theinterpretation of epidemiological studies is hampered by difficulties inmeasuring actual RF exposure during day-to-day use of wirelessphones. Many factors affect this measurement, such as the angle atwhich the phone is held, or which model of phone is used.6.What is the FDA doing to find out more about the possiblehealth effects of wireless phone RF?The FDA is working with the U.S. National Toxicology Program andwith groups of investigators around the world to ensure that highpriority animal studies are conducted to address important questionsabout the effects of exposure to radiofrequency energy (RF). TheFDA has been a leading participant in the World Health OrganizationInternational Electromagnetic Fields (EMF) Project since its inceptionin 1996. An influential result of this work has been the developmentof a detailed agenda of research needs that has driven theestablishment of new research programs around the world. Theproject has also helped develop a series of public informationdocuments on EMF issues.ENGLISH104Safety Guidelines

The FDA and the Cellular Telecommunications & InternetAssociation (CTIA) have a formal Cooperative Research andDevelopment Agreement (CRADA) to do research on wireless phonesafety. The FDA provides the scientific oversight, obtaining inputfrom experts in government, industry, and academic organizations.CTIA-funded research is conducted through contracts withindependent investigators. The initial research will include bothlaboratory studies and studies of wireless phone users. The CRADAwill also include a broad assessment of additional research needs inthe context of the latest research developments around the world.7.How can I find out how much radio frequency energyexposure I can get by using my wireless phone?All phones sold in the United States must comply with FederalCommunications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. The FCC established theseguidelines in consultation with the FDA and the other federal healthand safety agencies. The FCC limit for RF exposure from wirelesstelephones is set at a Specific Absorption Rate (SAR) of 1.6 wattsper kilogram (1.6 W/kg). The FCC limit is consistent with the safetystandards developed by the Institute of Electrical and ElectronicEngineering (IEEE) and the National Council on Radiation Protectionand Measurement. The exposure limit takes into consideration thebody’s ability to remove heat from the tissues that absorb energyfrom the wireless phone and is set well below levels known to haveeffects. Manufacturers of wireless phones must report the RFexposure level for each model of phone to the FCC. The FCCwebsite (http://www.fcc.gov/oet/ rfsafety) gives directions for locatingthe FCC identification number on your phone so you can find yourphone’s RF exposure level in the online listing.ENGLISH105

8.What has the FDA done to measure the radio frequencyenergy coming from wireless phones?The Institute of Electrical and Electronic Engineers (IEEE) isdeveloping a technical standard for measuring the radio frequencyenergy (RF) exposure from wireless phones and other wirelesshandsets with the participation and leadership of FDA scientists andengineers. The standard, “Recommended Practice for Determiningthe Spatial-Peak Specific Absorption Rate (SAR) in the Human BodyDue to Wireless Communications Devices: ExperimentalTechniques,” sets forth the first consistent test methodology formeasuring the rate at which RF is deposited in the heads of wirelessphone users. The test method uses a tissue-simulating model of thehuman head. Standardized SAR test methodology is expected togreatly improve the consistency of measurements made at differentlaboratories on the same phone. SAR is the measurement of theamount of energy absorbed in tissue, either by the whole body or asmall part of the body. It is measured in watts/kg (or milliwatts/g) ofmatter. This measurement is used to determine whether a wirelessphone complies with safety guidelines.9.What steps can I take to reduce my exposure toradiofrequency energy from my wireless phone?If there is a risk from these products — and at this point we do notknow that there is — it is probably very small. But if you areconcerned about avoiding even potential risks, you can take a fewsimple steps to minimize your exposure to radiofrequency energy(RF). Since time is a key factor in how much exposure a personreceives, reducing the amount of time spent using a wireless phonewill reduce RF exposure.ENGLISH106Safety Guidelines

ENGLISH107If you must conduct extended conversations by wireless phone everyday, you could place more distance between your body and thesource of the RF, since the exposure level drops off dramatically withdistance. For example, you could use a headset and carry thewireless phone away from your body or use a wireless phoneconnected to a remote antenna. Again, the scientific data do notdemonstrate that wireless phones are harmful. But if you areconcerned about the RF exposure from these products, you can usemeasures like those described above to reduce your RF exposurefrom wireless phone use.10.What about children using wireless phones?The scientific evidence does not show a danger to users of wirelessphones, including children and teenagers. If you want to take stepsto lower exposure to radiofrequency energy (RF), the measuresdescribed above would apply to children and teenagers usingwireless phones. Reducing the time of wireless phone use andincreasing the distance between the user and the RF source willreduce RF exposure. Some groups sponsored by other nationalgovernments have advised that children be discouraged from usingwireless phones at all. For example, the government in the UnitedKingdom distributed leaflets containing such a recommendation inDecember 2000. They noted that no evidence exists that using awireless phone causes brain tumors or other ill effects. Theirrecommendation to limit wireless phone use by children was strictlyprecautionary; it was not based on scientific evidence that any healthhazard exists.11.What about wireless phone interference withmedical equipment?Radio frequency energy (RF) from wireless phones can interact withsome electronic devices. For this reason, the FDA helped develop adetailed test method to measure electromagnetic

ENGLISH108interference (EMI) of implanted cardiac pacemakers and defibrillatorsfrom wireless telephones. This test method is now part of a standardsponsored by the Association for the Advancement of Medicalinstrumentation (AAMI). The final draft, a joint effort by the FDA,medical device manufacturers, and many other groups, wascompleted in late 2000. This standard will allow manufacturers toensure that cardiac pacemakers and defibrillators are safe fromwireless phone EMI. The FDA has tested hearing aids forinterference from handheld wireless phones and helped develop avoluntary standard sponsored by the Institute of Electrical andElectronic Engineers (IEEE). This standard specifies test methodsand performance requirements for hearing aids and wireless phonesso that no interference occurs when a person uses a “compatible”phone and a “compatible” hearing aid at the same time. Thisstandard was approved by the IEEE in 2000. The FDA continues tomonitor the use of wireless phones for possible interactions withother medical devices. Should harmful interference be found tooccur, the FDA will conduct testing to assess the interference andwork to resolve the problem. 12.Where can I find additional information?For additional information, please refer to the following resources:FDA web page on wireless phones(http://www.fda.gov/cdrh/phones/index.html)Federal Communications Commission (FCC) RF Safety Program(http://www.fcc.gov/oet/rfsafety)International Commission on Non-lonizing Radiation Protection(http://www.icnirp.de)World Health Organization (WHO) International EMF Project(http://www.who.int/emf)National Radiological Protection Board (UK)(http://www.nrpb.org.uk/)Safety Guidelines

ENGLISH109Consumer Information on SAR (Specific Absorption Rate)This Model Phone Meets the Government’s Requirements forExposure to Radio Waves.Your wireless phone is a radio transmitter and receiver. It isdesigned and manufactured not to exceed the emission limits forexposure to radio frequency (RF) energy set by the FederalCommunications Commission (FCC) of the U.S. Government. Theselimits are part of comprehensive guidelines and establish permittedlevels of RF energy for the general population. The guidelines arebased on standards that were developed by independent scientificorganizations through periodic and thorough evaluation of scientificstudies. The standards include a substantial safety margin designedto assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unitof measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR areconducted using standard operating positions specified by theFCC with the phone transmitting at its highest certified power levelin all tested frequency bands. Although SAR is determined at thehighest certified power level, the actual SAR level of the phonewhile operating can be well below the maximum value. Becausethe phone is designed to operate at multiple power levels to useonly the power required to reach the network, in general, thecloser you are to a wireless base station antenna, the lower thepower output.Before a phone model is available for sale to the public, it must betested and certified to the FCC that it does not exceed the limitestablished by the government-adopted requirement for safeexposure. The tests are performed in positions and locations (e.g.,at the ear and worn on the body) as required by the FCC for each

ENGLISH110model. The highest SAR value for this model phone when testedfor use at the ear is 0.31 W/kg and when worn on the body, asdescribed in this user’s manual, is 0.13 W/kg. (Body-wornmeasurements differ among phone models, depending uponavailable accessories and FCC requirements.) While there may bedifferences between SAR levels of various phones and at variouspositions, they all meet the government requirement for safeexposure.The FCC has granted an Equipment Authorization for this modelphone with all reported SAR levels evaluated as in compliancewith the FCC RF emission guidelines. SAR information on thismodel phone is on file with the FCC and can be found under theDisplay Grant section of http://www.fcc.gov/oet/fccid aftersearching on FCC ID BEJG5300S.Additional information on Specific Absorption Rates (SAR) can befound on the Cellular Telecommunications Industry Association(CTIA) website at http://www.wow-com.com*In the United States and Canada, the SAR limit for mobile phonesused by the public is 1.6 watts/kg (W/kg) averaged over one gramof tissue. The standard incorporates a substantial margin of safetyto give additional protection for the public and to account for anyvariations in measurements.Safety Guidelines

ENGLISH111Technical DataGeneralProduct Name : G5300SSystem : GSM 900/DCS 1800Ambient TemperaturesMax : +55°CMin : -10°C

ENGLISH112

ENGLISH113Memo

ENGLISH114Memo

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA