LG Electronics USA G5300S Single-Mode GSM1900 Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	350761
Application ID	2HYA+zol0XMfoK9zX60CDw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.46kB (968250 bits)
Date Submitted	2003-08-25 00:00:00
Date Available	2003-08-25 00:00:00
Creation Date	2003-08-19 17:56:53
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2003-08-20 11:42:20
Document Title	<00000>G5300S_½ºÆä_¿µ_Ç¥Áö
Document Creator	QuarkXPress3.3k: AdobePS 8.8.0 (301)
Document Author:	F2

ENGLISH
GPRS Phone
USER’S MANUAL
MODEL: G5300S
Please read this manual carefully
before operating your set.
Retain it for future reference.
3
ENGLISH
G5300S Phone
For Your Safety
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information carefully
for optimal performance and to prevent any damage to, or misuse
of, the phone. Any changes or modifications not expressly
approved in this user guide could void your warranty for this
equipment.
ENGLISH
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from heat. Never store your
phone in settings that may expose it to temperatures less than 32
°F or greater than 104 °F, such as outside during a snowstorm or
in your car on a hot day. Exposure to excessive cold or heat will
result in malfunction, damage and/or catastrophic failure.
Be careful when using your phone near other electronic
devices. RF emissions from your mobile phone may affect nearby
inadequately shielded electronic equipment. You should consult
with manufacturers of any personal medical devices such as
pacemakers and hearing aides to determine if they are susceptible
to interference from your mobile phone. Turn off your phone in a
medical facility or at a gas station. Never place your phone in a
microwave oven as this will cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on
page 96 before using your phone.
Safety Information
Please read and observe the following information for the safe and
proper use of your phone and to prevent any unanticipated damage.
Also, keep the user’s manual in an accessible place at all the times
after reading it.
• Unplug the power cord and charger during a lightning storm to
avoid electric shock or fire.
• Do not use your phone in high explosive areas as the phone may
generate sparks.
• Do not put your phone in a place subject to excessive dust, and
keep the minimum required distance between the power cord and
heat sources.
• Unplug the power cord prior to cleaning your phone, and clean the
power plug pin when it is dirty.
• Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may
cause fire or electric shock.
• Hold the power cord plug firmly to plug and unplug the power cord.
Ensure the plug is firmly connected. If it is not firmly connected, it
may cause excessive heat or fire.
• Do not place a heavy item on the power cord. Do not allow the
power cord to be crimped as it may cause fire or electric shock.
• Be careful not to let the battery contact metal conductors such as a
necklace or coins. When shorted, it may cause an explosion.
ENGLISH
• Do not disassemble or impact the battery as it may cause electric
shock, short-circuit, and fire. Store the battery in a place out of
reach of children.
For Your Safety
• Using a damaged battery or placing a battery in your mouth may
cause serious injury.
• Do not place items containing magnetic components such as a
credit card, phone card, bank book or a subway ticket, near your
phone. The magnetic strip can be damaged by the phone.
• Do not hold or let the antenna come in contact with your body
during a call.
• Talking on your phone for a long period of time may reduce the call
quality due to heat generated during the use of the phone.
• Do not allow excessive vibration or impact to the phone.
• When you do not plan to use the phone for a long period of time,
store it in a safe area with the power cord unplugged.
FCC RF Exposure Information
WARNING! Read this information before operating the phone. In
August 1996, the Federal Communications (FCC) of the United
States, with its action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety standard previously
set by both U.S. and international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
ENGLISH
CAUTION
Use only the supplied and approved antenna. Use of unauthorized
antennas or modifications could impair call quality, damage the
phone, void your warranty and/or result in violation of FCC
regulations. Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with skin, a minor burn may
result. Contact your local dealer for a replacement of antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the
back of the phone kept 1.5 cm from the body. To comply with FCC
RF exposure requirements, a minimum separation distance
of 1.5 cm must be maintained between the user’s body and
the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not be
used. Body-worn accessories that cannot maintain 1.5 cm
separation distance between the user’s body and the back of the
phone, and have not been tested for typical body-worn operations
may not comply with FCC RF exposure limits and should be avoided.
Vehicle Mounted External Antenna (optional, if available)
A minimum separation distance of 8 inches (20 cm) must be
maintained between the user/bystander and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements. For
more information about RF exposure, visit the FCC website at
www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device
and its accessories may not cause harmful interference, and (2) this
device and its accessories must accept any interference received,
including interference that may cause undesired operation.
Cautions for Battery
• Do not disassemble.
• Do not expose to high temperature: 60°C (140°F).
• Do not incinerate.
ENGLISH
• Do not short-circuit.
For Your Safety
Battery Disposal
• Please dispose of your battery properly or bring to your local
wireless carrier for recycling.
• Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
• Using the wrong battery charger could damage your phone and
void your warranty.
• The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or use
it in places with high humidity, such as the bathroom.
ENGLISH
Contents
Overview
Part of the Phone ................................................................ 13
• Front of the Phone ............................................................. 13
• Rear of the Phone .............................................................. 14
Key Description ................................................................... 15
• Alphanumeric Keys ............................................................ 17
Display Information
Display Information ............................................................. 18
• On-Screen Icons ................................................................ 18
Getting Started
Installation ........................................................................... 20
• Inserting the SIM Card ....................................................... 20
• Installing the Battery .......................................................... 21
• Charging the Battery .......................................................... 22
• Disconnecting the charger ................................................. 23
Powering On Sequence ...................................................... 24
• To get started with the phone ............................................ 24
• To turn off the phone .......................................................... 24
ENGLISH
Access Codes ...................................................................... 25
• PIN code (4 to 8 digits) ...................................................... 25
• PIN2 code (4 to 8 digits) .................................................... 25
• PUK code (4 to 8 digits) ..................................................... 25
• PUK2 code (4 to 8 digits) ................................................... 26
• Security code (4 to 8 digits) ............................................... 26
Accessing the Menu
Phonebook ........................................................................... 27
Menu Tree ............................................................................ 28
Messages [Menu 1] ............................................................. 30
• Write short message [Menu 1-1] ........................................ 30
• Write multimedia message [Menu 1-2] .............................. 32
• Inbox [Menu 1-3] ................................................................ 38
• Outbox [Menu 1-4] ............................................................. 40
• Voice mail [Menu 1-5] ........................................................ 41
• Info service [Menu 1-6] ...................................................... 42
• Templates [Menu 1-7] ........................................................ 43
• Settings [Menu 1-8] ............................................................ 44
Call Register [Menu 2] ........................................................ 47
• Missed calls [Menu 2-1] ..................................................... 47
• Received calls [Menu 2-2] .................................................. 47
• Dialled calls [Menu 2-3] ...................................................... 47
• All calls list [Menu 2-4] ....................................................... 47
• Delete recent calls [Menu 2-5] ........................................... 47
• Call charge [Menu 2-6] ....................................................... 49
• GPRS information [Menu 2-7] ............................................ 50
ENGLISH
Profiles [Menu 3] ................................................................. 51
• Vibrate only [Menu 3-1] ...................................................... 51
• Quiet [Menu 3-2] ................................................................ 51
• General [Menu 3-3] ............................................................ 51
• Loud [Menu 3-4] ................................................................. 51
• Headset [Menu 3-5] ........................................................... 51
• Car [Menu 3-6] ................................................................... 52
10
Settings [Menu 4] ................................................................ 54
• Alarm clock [Menu 4-1] ...................................................... 54
• Date & Time [Menu 4-2] ..................................................... 54
• Phone settings [Menu 4-3] ................................................. 55
• Call settings [Menu 4-4] ..................................................... 57
• Security settings [Menu 4-5] .............................................. 61
• Network settings [Menu 4-6] .............................................. 64
• Reset settings [Menu 4-7] .................................................. 65
Organizer [Menu 5] .............................................................. 66
• Scheduler [Menu 5-1] ......................................................... 66
• Phone book [Menu 5-2] ...................................................... 67
Fun & Tools [Menu 6] .......................................................... 76
• Calculator [Menu 6-1] ......................................................... 76
• My folder [Menu 6-2] .......................................................... 76
• Game [Menu 6-3] ............................................................... 77
• Unit converter [Menu 6-4] .................................................. 78
• World time [Menu 6-5] ........................................................ 78
11
ENGLISH
WAP services [Menu 7] ....................................................... 79
• Home [Menu 7-1] ............................................................... 79
• Bookmarks [Menu 7-2] ....................................................... 79
• Push messages [menu 7-3] ............................................... 79
• Profiles [Menu 7-4] ............................................................. 80
• Go to URL [Menu 7-5] ........................................................ 82
• Cache settings [Menu 7-6] ................................................. 83
• Security certifications [Menu 7-7] ....................................... 83
• Reset profiles [Menu 7-8] ................................................... 83
Java [Menu 8] ...................................................................... 84
• Applications [Menu 8-1] ..................................................... 84
• Memory status [Menu 8-2] ................................................. 85
• Download [Menu 8-3] ......................................................... 85
Internet On-line menu ......................................................... 86
Additional Functions
How to Use Data and Fax call ............................................ 87
• Sending Data or Fax Calls ................................................. 87
• Receiving Data or Fax Calls .............................................. 87
In call Menu .......................................................................... 89
1. During a call ..................................................................... 89
2. Multiparty or Conference Calls ......................................... 91
Accessories ......................................................................... 94
Safety Guidelines ................................................................. 96
Technical Data ................................................................... 111
ENGLISH
12
Part of the Phone
Overview
Front of the Phone
Earpiece
Display Screen
Soft Left Key
Navigation Keys
Send Key
Star Key
Soft Right Key
10
11
12
END/PWR keys
Numeric Keys
Hash Key
Microphone
Ear Microphone
Connector
13 WAP Hotkey/
Clear key
13
ENGLISH
Part of the Phone
Overview
Rear of the Phone
ENGLISH
1 Battery
2 Cable Connector/
Battery Charging Connector/
Hands-Free Car kit Connector
3 Battery Terminals
4 SIM Card Socket
5 Handstrap Hole
6 Battery Lock
7 Ear Microphone Connector
14
Key Description
Overview
The following shows key components of the phone.
Keypad Description
Key
<>
Description
Soft Left Key / Soft Right Key
Each of these keys performs the function indicated
by the text on the display immediately above it.
WAP Hotkey / Clear key
Used to connect to WAP directly by pressing this key.
Used to delete character(s).
Navigation Keys
Used to scroll through name, phone numbers, menus
or setting options.
Used to enter Message menu directly.
Used to scroll through names, phone numbers.
Numeric Keys
These keys are used mainly to dial in standby mode
and enter numbers or characters in editing mode.
When you press these keys for a long time.
• Used to call your voicemail box by 1 .
• Used to call for international call by 0 .
• Used to call Speed dials by from 2 to 9.
15
ENGLISH
Send Key
You can dial a phone number and answer a call.
If you press this key without entering a number,
your phone shows the most recently dialed number.
Key Description
Overview
ENGLISH
16
Key
Description
Used to enter the vibration mode by pressing this key
for a long time.
Used to call by voice dial with long pressing this key.
This key is also used as Ear mic. hook key when
connecting Ear mic.
END/PWR Key
Used to end or reject a call. This key is also used as
Power Key. Pressing and holding this key for a few
seconds.
Overview
Alphanumeric Keys
The alphabet and numerical keypad mapping relation are listed as
the following table.
Key
Description
.,/?!-:’"
ABC2ÄÀÁÂÃÅÆÇabcäàáâãå
DEF3ËÈÉÊdefëèéê
GHI4ÏÌÍνghiïìíî©
JKL5jkl
MNO6ÑÖÒÓÔÕŒmnoñöòóôõœ
PQRS7Ípqrsßß
TUV8ÜÙÚÛtuvüùúû
WXYZ9wxyz
0 [Space Key]
ç
ENGLISH
17
Display Information
Display Information
The screen displays several icons the following describe each of
them you may see on the phone.
On-Screen Icons
Icon/Indicator Description
Tells you the strength of the network signal.
Call is connected.
You can use GPRS service.
Shows that you are using a roaming service.
Line 1/2 is in use for outgoing calls – If you
subscribe to the Two Line Service.
The alarm has been set and is on.
Tells you the status of the battery.
You have received a text message.
You have received a voice message.
You have received an E-mail.
You can view your schedule.
All audible signals are turned off.
ENGLISH
General menu in profile.
Loud menu in profile.
Quiet menu in profile.
18
Display Information
Icon/Indicator Description
Headset menu in profile.
Car menu in profile.
You can divert a call.
You can use Push message service through WAP.
Top Menu Icons
Icon
Description
Messages
Call Register
Profiles
Settings
Organizer
Fun & Tools
Wap services
19
ENGLISH
Java
Installation
Getting Started
➊ Inserting the SIM Card
Locate the SIM card socket in the back of the phone.
Follow the steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the slot,
under the silvery holders, with the
golden connectors facing down and
the cut corner to the right.
3. If you need to remove the SIM card,
press the upper part of SIM card with
the thumb, then carefully slide it out
of the SIM card slot.
Notice
• Before installing always make sure that the phone is
switched off and remove the battery.
ENGLISH
• The metal contact of the SIM card can be easily damaged
by scratches. Pay special attention to the SIM card when
you handle and install. Follow the instructions supplied with
the SIM card.
20
Getting Started
➋ Installing the Battery
1. Place the battery on the back of the
phone.
2. Push it until you hear a click.
ENGLISH
21
Installation
Getting Started
➌ Charging the Battery
To connect the travel adapter to the phone, you must have installed
the battery.
1. Insert one end of the travel adapter
into the bottom of the phone.
2. Connect the other end of the travel
adapter to an AC wall outlet.
Use only the included packing charger.
Warning
• Do not force the connector as this may damage the phone
and/or the travel adapter.
ENGLISH
22
Getting Started
➍ Disconnecting the charger
Disconnect the travel adapter from the
phone by pressing its side buttons.
Notice
• The battery delivered with your phone has to be fully
charged before using it.
• Do not remove your battery or the SIM card while charging.
• “Charging” is displayed on the screen after connecting the
travel adapter. Only if the battery is totally empty, Back light
is on without displaying “Charging”. Please note in this
case, it may require a longer initial charging time before
displaying “Charging” on the screen of the phone.
The charging time depends on the charger and the battery
used.
• The moving bars of battery icon will stop after charging
completely.
ENGLISH
23
Powering On Sequence
Getting Started
➊ To get started with the phone
1. Press and hold E key until you
hear a tone.
2. Depending on setting PIN code
request, you can enter PIN code or
not.
3. If your phone connects to a
network, the network name will be
displayed shortly.
➋ To turn off the phone
In standby mode, press and hold E key until you hear a tone.
ENGLISH
24
Access Codes
Getting Started
You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK1
and PUK2 codes) can be changed by using [Menu 4-5-6].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM
card against unauthorised use. The PIN code is usually supplied with
the SIM card. When PIN code request is set Enable, your phone
will request the PIN code every time it is switched on. On the
contrary, when PIN code request is set Disable, your phone
connects to the network directly without the request PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to access
some functions such as Advice of call charge, Fixed Dial number.
These functions are only available if supported by your SIM card.
PUK code (4 to 8 digits)
The PUK(PIN Unblocking Key) code is required to change a blocked
PIN code. The PUK code may be supplied with the SIM card. If not,
contact your local service provider for the code. If you lose the code,
also contact your service provider.
ENGLISH
25
Access Codes
Getting Started
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is required to
change a blocked PIN2 code. If you lose the code, also contact your
service provider.
Security code (4 to 8 digits)
The security code protects the unauthorised use of your phone. It is
usually supplied with the phone. This code is required to delete all
phone entries and to activate “Reset settings” menu. The default
number is “0000”.
ENGLISH
26
Phonebook
Accessing the Menu
To select a menu in phonebook, press
[Names] in standby mode and then
scroll to a desired item.
Name
Name
Description
Description
Search
Allows you to search for a specific name,
number.
Add new
Allows you to add new names and numbers.
Speed dials
Allows you to assign up to 8 ( 2 - 9 )
one-touch dial allocations.
Voice list
Allows you to list phone numbers which is
attached voice.
Caller groups
Allows you to show group list.
Copy all
Allows you to copy entries from your Phone
memory to SIM card or from SIM card to
Phone memory.
Delete all
Allows you to erase all the data in either your
phonebook or the SIM card to the phone
memory.
Settings
Allows you to set the memory and to search
item by Variable, name and number.
Information
Allows you to check the status of memory,
SDN (Service Dial Number), and Own
number list.
27
ENGLISH
Menu Tree
Accessing the Menu
1 Messages
Write short message
Write multimedia message
Inbox
Outbox
Voice mail
Info service
Templates
Settings
3 Profiles
Vibrate only
Quiet
General
Loud
Headset
Car
4 Settings
2 Call Register
ENGLISH
28
Missed calls
Received calls
Dialled calls
All calls list
Delete recent calls
Call charge
GPRS information
Alarm clock
Date & Time
Phone settings
Call settings
Security settings
Network settings
Reset settings
Accessing the Menu
5 Organizer
1 Scheduler
2 Phone book
6 Fun & Tools
Calculator
My folder
Game
Unit converter
World time
7 WAP services
Home
Bookmarks
Push messages
Profiles
Go to URL
Cache settings
Security certifications
Reset profiles
8 Java
1 Applications
2 Memory status
3 Download
ENGLISH
29
Messages [Menu 1]
Accessing the Menu
This menu includes functions related to SMS (Short Message
Service), MMS (Multimedia Message Service), voice mail, as well as
the network’s service messages.
Write short message [Menu 1-1]
You can write and edit text messages, checking the number of
characters.
1. Enter Messages then select Write short message.
2. To write a message, use T9 text. For details, see How to use T9
(Page 31).
3. Press [Insert] to attach the followings.
4. When you finish writing, press [Options].
Insert
• Symbol
You can add special characters.
• Picture
You can insert the Default pictures or pictures in My folder that
are available for short messages.
• Sound
You can insert sounds that are available for short messages.
ENGLISH
• Text templates
You can use Text templates already set in the phone.
30
Accessing the Menu
• Phonebook
You can add phone numbers or e-mail addresses in Phonebook.
• Business card
You can add your contact information to the message.
Options
• Send
Sends text messages.
1. Enter numbers of recipient.
2. Press D key to add more recipients.
3. You can add phone numbers in the phone book.
4. Press < after entering numbers.
• Save
Stores messages in Outbox.
• Font
You can select Size and Style of fonts.
• Colour
You can select Colour of foreground and background.
31
ENGLISH
• Alignment
You can make the message contents aligned Right, Centre or
Left.
Messages [Menu 1]
Accessing the Menu
• Add T9 dictionary
You can add your own word. This menu can be shown only when
edit mode is Predictive (T9Abc/T9abc/T9ABC).
• T9 langauges
Select a T9 input mode.
• Exit
If you press Exit while writing a message, you can end the writing
message and back to the Message menu. The message you have
written is not saved.
Write multimedia message [Menu 1-2]
You can write and edit multimedia messages, checking message
size.
1. Enter the Messages menu by pressing < [Select].
2. If you want to write a new message, select Write multimedia
message.
3. You can create a new message or choose one of the multimedia
message templates already made.
4. Press Insert to add Symbol, Picture, Sound, Text templates,
Phonebook or Business card.
ENGLISH
32
Accessing the Menu
Options
• Preview
You can preview multimedia messages you wrote.
• Send
You can send multimedia messages to multiple recipients, prioritise
your message, and make it sent later as well.
• Save
You can save multimedia messages in the outbox or as templates.
• Add slide
You can add a slide before or after current slide.
• Move to slide
You can move to previous or next slide.
• Delete slide
You can delete current slides.
• Set slide format
- Set timer
You can set timer for slide, text, picture and sound.
33
ENGLISH
- Swap text and picture
You can switch the position of picture and text of the message.
Messages [Menu 1]
Accessing the Menu
• Add T9 dictionary
You can add your own word. This menu can be shown only
when edit mode is Predictive (T9Abc/T9abc/T9ABC).
• T9 langauges
Select a T9 input mode.
• Exit
You can back to the Message menu.
ENGLISH
34
Accessing the Menu
How to Use T9
T9 allows you to input text quickly.
In T9, you only need to press the key with the corresponding
letter once. This is based on a built-in dictionary to which you
can also add new words.
• Writing words by using T9.
1. Start writing a word by using the keys 2 to 9.
Press each key only once for one letter.
To write for instance ‘Girl’.
4 (For i)
4 (For g)
160
159
7 (For r)
157
158
5 (For l)
156
35
ENGLISH
The word changes after each keystroke. Therefore you
shouldn’t pay too much attention to how the word appears
on the display until you have pressed all the appropriate
keys.
Messages [Menu 1]
Accessing the Menu
To delete a character to the left, press C.
To insert several numbers, hold # down and key in the
numbers.
If you hold * down, you can change the type of
language. (You can also use options.)
Also, the phone supports three modes: Predictive
(T9Abc, T9ABC, T9abc), Multitap (ABC, abc), Numeric
(123). If you want to change a mode, press # key.
Alternatively
: Press * key and select insert
symbols. Select the desired character
and press Select.
2. When you have finished wirting a word, check whether the
word is correct.
ENGLISH
36
If the word
is correct
: Press 0 and write the next word.
If the word is
not correct
: Search by U , D (Previous and
Next word).
Alternatively
: If there is no word you want you can
add your own word. Press <
[Options] in the Predictive edit mode.
Select Add T9 dictionary Menu.
You can see the following.
Accessing the Menu
Input your
word
LGGSM
➭
3. To insert a punctuation mark, press 1 repeatedly until
the desired mark appears.
T9 languages
• You can select T9 Languages by selecting Menu.
In T9 mode, you can also select T9 Off menu.
(Default is T9 On)
ENGLISH
37
Messages [Menu 1]
Accessing the Menu
Inbox [Menu 1-3]
You will be alerted when you have received messages. They will be
stored in Inbox.
In Inbox, you can identify each message by icons. For detail, see the
icon directive.
Icon directive
] Multimedia message
] Short message
] SIM message
] Read
] Notified multimedia message
If the phone shows ‘No space for SIM message’, you have to delete
any SIM messages from inbox or outbox. If the phone displays ‘No
space for message’, you can make space of each repository as
deleting messages, media and applications.
❇ SIM message
SIM message means the message exceptionally stored in SIM
card.
ENGLISH
For notified multimedia message, you have to wait for downloading
and processing of the message. For notification setting, see [Menu
1-8-2] for detail.
To read a message, select one of the messages by pressing <.
38
Accessing the Menu
Reply
You can reply to the sender.
Forward
You can forward the selected message to another party.
Return call
You can call back to the sender.
Delete
You can delete the current message.
Extract
You can extract picture, sound and text. They will be saved in My
folder or Phonebook.
View information
You can view information about received messages; Sender's
address, Subject (only for Multimedia message), Message date &
time, Message type, Message size.
ENGLISH
39
Messages [Menu 1]
Accessing the Menu
Replay (applicable to Multimedia message only)
You can replay multimedia messages.
❇ Receive (In case of notification message)
If Multimedia message is set to Auto download off, you can get
only Notification. To receive a message, you need to select
[Receive]. Although Mulimedia message is set to Auto
download on, on the network condition or other reasons, you can
get notification message.
Outbox [Menu 1-4]
When you have sent a message, you can see the sent message list
including delivery report.
Icon directive
] Sent
] Unsent
] Delivery confirmed
❇ When you use the message which is already sent
Edit
You can edit the selected message.
ENGLISH
Send
The selected message is to be sent.
40
Accessing the Menu
Delete
The selected message is deleted.
View information
Shows whether the message was sent, unsent or delivered
successfully.
Voice mail [Menu 1-5]
Listen to voice mail
You can listen to voice mail.
Voice mail centre
You can get the voicemail if this feature is supported by the network
service provider. When new voicemail is arrived, the symbol will be
displayed on the screen. Please check with your network service
provider for details of their service in order to configure the handset
accordigly.
1. Hold down < key in standby mode.
2. You can check the following submenus.
• Home
The number dialed on the home network to listen to voicemail.
41
ENGLISH
• Roam
The number dialed when other networks to listen to voicemail.
Messages [Menu 1]
Accessing the Menu
Info service [Menu 1-6]
(Dependent to network and subscription)
Cell Broadcast messages (CB Message) are text messages by the
network to GSM phone users. They provide general information such
as weather reports, traffic news, taxis, pharmacies, and stock prices.
Each type of information has the number; therefore, you can contact
service provider. When you receive CB message, you can read it
following sequence:
Read
1. When you receive CB message, it will be displayed on the screen.
You can read the message by scrolling U , D .
2. After reading the message, press E to return to the standby
mode. In addition, you can save it until another message is
reached.
Receive
Allows you to receive Cell broadcast messages.
Alert
Allows you to alert by beep when you receive Cell broadcast
messages.
Languages
ENGLISH
You can select the language you want. Then, the cell broadcast
message will be shown in the language that you selected.
42
Accessing the Menu
Topics (Dependent to network and subscription)
• Add new
You can add the CB message category in the Phone memory with
its nickname.
• View list
You can see the CB message category which you added. If you
press [Options], you can edit and delete CB message category
which you added.
• Active list
You can select the CB message category in the active list by
pressing [On/Off].
Templates [Menu 1-7]
You can see 11 predefined messages in the list and save 6
templates before you edit. You can also change them. The others
are .
Text
Allows you to edit predefined messages.
ENGLISH
43
Messages [Menu 1]
Accessing the Menu
Multimedia
Allows you to edit predefined Multimedia messages.
You can use the following option for Text and Multimedia.
Edit
: You can edit multimedia templates.
Add new
: Allows you to add new multimedia templates.
Write message : You can write multimedia messages using
multimedia templates.
Delete
: You can delete multimedia templates.
Business card
Settings [Menu 1-8]
Short message
• Message type
Text, Voice, Fax, Natl. paging, X.400, E-mail, ERMES
Usually, the type of message is set to Text. You can convert your
text into alternative formats. Contact your service provider for the
availability of this function.
• Validity period
This network service allows you to set how long your text
messages will be stored at the message centre.
ENGLISH
44
Accessing the Menu
• Delivery report
If you set Yes in this menu, you can check whether your message
is sent successfully or not.
• Reply via same service centre
When a message is sent, it allows the person to whom you sent the
message to reply and charges the cost of the reply to your
telephone bill.
• SMS centre
If you want to send the text message, you can get the address of
SMS centre through this menu.
Multimedia message
• Validity period
This network service allows you to set how long your text
messages will be stored at the message centre.
• Delivery report
If you set Yes in this menu, you can check whether your message
is sent successfully or not.
• Auto download
If you select ‘on’, you receive multimedia messages automatically.
If you select ‘off’, you receive only notification message in inbox
and then you can check this notification.
45
ENGLISH
If you select “confirm”, you can be aware of arriving notification by
pop-up message.
Messages [Menu 1]
Accessing the Menu
• Network settings
If you select multimedia message server, you can set IP address
for multimedia message server.
• Permitted message types
Personal
: Persornal message.
Advertisements : Commercial message.
Information
: Necessary information.
Memory status
You can check how many free and in-use are in the SIM memory or
the Phone memory.
ENGLISH
46
Call Register [Menu 2]
Accessing the Menu
Missed calls [Menu 2-1]
This menu shows recently missed numbers. You can call by this
number, also save and view date and time this menu as well as
writing messages.
Received calls [Menu 2-2]
This menu shows recently received numbers. You can call by this
number, also save and view date and time, as well as writing
messages.
Dialled calls [Menu 2-3]
This menu shows recently dialed numbers. You can call by this
number, also save and view date and time, as well as writing
messages.
All calls list [Menu 2-4]
You can save the phone number and check the date and time for a
call. Moreover, you can call back to the other party, as well as writing
messages.
Delete recent calls [Menu 2-5]
You can delete the all call records.
ENGLISH
47
Call Register [Menu 2]
Accessing the Menu
Call charge [Menu 2-6]
Within these submenus, you can view the duration and the call cost
of your calls.
Call duration
This function allows you to view the duration of your Last Call, All
Calls, Received calls and Dialled calls in hours, minutes and
seconds. You can also reset the call timers.
Show call costs
This function allows you to check the cost of your last call, all calls,
remaining and reset the costs. To reset the cost, you need the PIN2
code.
Note
• The actual call cost may be different depending on network
features, billing, and tax.
ENGLISH
48
Accessing the Menu
Settings [SIM Dependent]
• Set tariff
You can set the currency type and the unit price. Contact your
services providers to obtain charging unit prices. To select the
currency or unit in this menu, you need the PIN2 code.
• Set credit
This network service allows you to limit the costs of your calls by
selected charging units. If you select Read, the number of
remaining unit is shown. If you select Change, you can change
your charge limit.
Note
• When all units have been used, no calls can be made
except emergency calls. Depending on SIM card, you need
the PIN2 code to set a call cost limit.
• Auto display
This network service allows you to see automatically cost of your
last call. If you select Yes in Auto display menu, you can see the
last cost when the call is released.
ENGLISH
49
Call Register [Menu 2]
Accessing the Menu
GPRS information [Menu 2-7]
You can check the amount of data transferred over the network
through GPRS. In addition, you can also view how much time you
are online.
Call duration
You can check the duration of GPRS call. You can also reset the call
timers.
• Last call
• All calls
• Reset
Data volume
You can check the data volume.
• Sent
• Received
• All
• Reset all
ENGLISH
50
Profiles [Menu 3]
Accessing the Menu
In this menu, you can adjust and customize the phone tones for
different events, environments and caller’s group.
Note
• When your phone is connected to the Handsfree kit, it’ll be
automatically set to the Car profiles menu and when your
phone is connected to the Earmic, it’ll be automatically set
to Headset profiles menu then each submenu related to
them will be displayed automatically.
Vibrate only [Menu 3-1]
You can adjust the profile as Vibration if you need vibration mode.
Quiet [Menu 3-2]
You can adjust the profile as Quiet if you are in quiet place.
General [Menu 3-3]
You can adjust the profile as General.
Loud [Menu 3-4]
You can adjust the profile as Loud if you are in a noisy environment.
You can adjust the Profiles as Headset when you put on a headset.
51
ENGLISH
Headset [Menu 3-5]
Profiles [Menu 3]
Accessing the Menu
Car [Menu 3-6]
You can adjust the Profiles as Car when you activate Handsfree Kit.
A Group of Profiles submenus
Profiles menu have the submenus as shown below.
Incoming alert type
Allows to alert for the incoming call for adjusting environment.
Ring tone
Allows to set the ringing tone for adjusting environment.
Ring volume
Allows to set the ring volume for adjusting environment.
Message alert type
Allows to alert when receiving a message for adjusting environment:
Ring once, Vibrate, Silent.
Key/Effect volume
Allows to set the Key volume and effect volume for adjusting
environment.
Keypad tone
ENGLISH
Allows to set the keypad tone for adjusting environment.
52
Accessing the Menu
Auto answer
Allows to set to answer automatically for adjusting environment.
Please note that only Car and Headset has this sub menu so that
you can activate this function.
• Off
Even though your phone is ringing, your phone will not answer
automatically.
• After 5 secs
After 5 seconds your phone will answer automatically.
• After 10 secs
After 10 seconds your phone will answer automatically.
Note
• If you set the Handsfree kit to the phone, you can’t activate
the vibration related with Incoming alert or Message alert
menu. Therefore, in Handsfree menu, you can view the
following submenus;
- Incoming alert : Ring, Silent
- Message alert : Ring Once, Silent
ENGLISH
53
Settings [Menu 4]
Accessing the Menu
You can set the following menus for your convenience and
preferences.
Alarm clock [Menu 4-1]
You can set the alarm to go off at a specified time.
1. Select On and enter the alarm time you want.
2. Select the repeat period : Once, Mon~Fri, Mon~Sat, Every
day.
3. Select the alarm tone you want and press [OK].
4. Edit the alarm name and press [OK].
5. If you set Alarm clock to Power off alarm, the alarm goes off
at a specified time despite the phone is switched off.
Date & Time [Menu 4-2]
You can set functions relating to the date and time.
Date
• Set date
You can set the date of your phone.
• Date format
You can set the Date format.
ENGLISH
54
Accessing the Menu
Time
The phone has its own clock. In this menu you can set the time and
select between the 12-hour or 24-hour time formats.
• Set time:
You can set time of your phone in this menu.
• Time format:
Your can select time format between 12-hour or 24-hour.
Phone settings [Menu 4-3]
You can set functions relating to the phone.
Display settings
• Screen saver
You can set screen saver.
• Call
You can set the animation as making a call.
• Wallpaper
You can select background picture in a standby mode.
ENGLISH
55
Settings [Menu 4]
Accessing the Menu
• Greeting note
If you select yes, this menu allows you select the standby display.
In text mode, you can edit the text.
• Backlight
You can set the light-up duration you want whenever you press a
key.
• LCD contrast
LCD contrast
You can set the brightness of LCD you want by
pressing U , D .
Languages
You can select the language will be displayed.
ENGLISH
56
Accessing the Menu
Call settings [Menu 4-4]
You can set the menu relevant to a call by pressing [Select] in
Setting menu.
Call divert
The Call divert service allows you to divert incoming voice calls, fax
calls, and data calls to another number. For details, contact your
service provider.
• All voice calls
Diverts voice calls unconditionally.
• If busy
Diverts voice calls when the phone is in use.
• If no reply
Diverts voice calls which you do not answer.
• If out of reach
Diverts voice calls when the phone is switched off or out of
coverage.
• All data calls
Diverts to a number with a PC connection unconditionally.
• All fax calls
Diverts to a number with a fax connection unconditionally.
ENGLISH
57
Settings [Menu 4]
Accessing the Menu
• Cancel all
Cancels all call divert service.
• The submenus
Call divert menus have the submenus as shown below.
- Activate
Activating the corresponding service.
To other number
Inputs the number for diverting.
To favorite number
You can check 5 diverted numbers.
To voice mail
Forwards to message centre. This function doesn’t include All
data calls and All fax calls menus.
- Cancel
Deactivating the corresponding service.
- View status
Viewing the status of the corresponding service. Shows the status
of Call waiting.
ENGLISH
58
Accessing the Menu
Anykey answer
• On
If you select this menu, you can receive a call by pressing any key
except E key.
• Off
If you select this menu, you can receive an incoming call by only
pressing S key.
Note
• How to use Handfree portable:
If you want to use the handsfree portable(earphone), please
press the button # for a long time after inserting it to the
connector when incoming a call.
Send my number
(network and subscription dependent)
• On
If you select this, you can send your phone number to the other
party. That is, your phone number will be displayed on receiver’s
phone.
• Off
If you select this, you can’t send your phone number.
ENGLISH
59
Settings [Menu 4]
Accessing the Menu
Call waiting
(network dependent)
If this service is Enable, you can accept a waiting (incoming) call.
• On
Activating the corresponding service.
• Off
Deactivating the corresponding service.
• View status
Checking the Status of the service.
Minute minder
If you select On, you can check the call duration by beep sound
every minute during a call.
Auto redial
• On
When this function is set on, your phone will make up to 10
attempts for a call after not connecting.
• Off
Your phone will not make any attempts to connect the call after not
connecting.
ENGLISH
60
Accessing the Menu
Select line
This function is only used if Alternate line service supported by the
Service Provider. Two independent phone numbers are registered
for the phone. This function provides you with the selection the
currently used phone number. If this function is supported by your
service provider, the following menu will be displayed.
• Line 1 : Select Line 1 as the current phone number.
• Line 2 : Select Line 2 as the current phone number.
Security settings [Menu 4-5]
PIN code request
In this menu, you can set the phone to ask for the PIN code of your
SIM card when the phone is switched on. If this function is activated,
you’ll be requested to enter the PIN code.
1. Press [Menu] in standby mode.
2. Press 4 key for direct access or use U and D to enter
Settings.
3. Scroll to highlight Security settings menu.
4. Select PIN code request by pressing [Select].
5. You can view the following submenus.
• On : Enable PIN code request.
• Off : Disable PIN code request.
ENGLISH
61
Settings [Menu 4]
Accessing the Menu
Phone lock
You can use security code to avoid unauthorized use of your phone.
When you switch on your phone, your phone will request security
code always if you set phone lock to “On”. If you set phone lock to
“Automatic”, your phone will request security code only when you
change your SIM card.
• On
• Off
• Automatic
Automatic key lock
When you enable Automatic key lock, keypad will be lock
automatically on an idle screen after 25 seconds without any key
requesting.
• On
• Off
Note
• If you want to lock your phone keypad manually, enter Top
menu and press * key.
ENGLISH
• If you want to unlock your phone keypad, press <
[unlock] key and then press * key. But if you enabled
Automatic key lock before, your phone keypad will be
unlock and then after 25 seconds the keypad will be lock up
again automatically.
62
Accessing the Menu
Call barring
The Call barring service prevents your phone from making or
receiving certain category of calls. This function requires the call
barring password. You can view the following submenus.
• All outgoing :
The barring service of all outgoing calls.
• International [Outgoing international] :
The barring service of all outgoing international calls.
• International except home
[Outgoing international when roam] :
The barring service of all international outgoing calls except home
network.
• All incoming :
The barring service of all incoming calls.
• Incoming when abroad :
The barring service of all incoming calls when abroad.
• Cancel all :
You can cancel all barring service.
• Change passwd :
You can change the password for Call Barring Service.
ENGLISH
63
Settings [Menu 4]
Accessing the Menu
Fixed dial number (SIM dependent)
You can restrict your outgoing calls to selected phone number. The
numbers are protected by your PIN2 code.
• Activate
You can restrict your outgoing calls to selected phone number.
• Cancel
You can call without restricting phone number.
• Number list
You can view the number list saved as Fixed dial number.
Change codes
You can change the access codes : PIN, PIN2, Security code.
Network settings [Menu 4-6]
You can select the network which you will be registered either
automatically or manually. Usually, the selection of the network used
by the handset is automatic.
Automatic
The phone automatically selects network which is available in the
area.
ENGLISH
64
Accessing the Menu
Manual
The phone will find the list of available networks and show you them.
Then you can select the network which you want to use if this
network has a roaming agreement with your home network operator.
Preferred
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
User define
You can add entries or delete new ones from the network list.
This can even include new networks whose network codes are not
known to the handset. To do this, select and then enter the network
code, country code and network name.
Reset settings [Menu 4-7]
You can set the handset to the default configuration by selecting this
menu. In addition, you need Security code to activate this function.
ENGLISH
65
Organizer [Menu 5]
Accessing the Menu
Scheduler [Menu 5-1]
On top of the screen there are sections for date and icons.
Whenever you change the date, the calendar will be updated
according to the date. And square cursor will be used to locate the
certain day. If you see under bar on the calendar, it means that there
is a schedule that day. This function helps to remind you of your
schedule and memo. The phone will sound an alarm tone if you set
this for the note.
For changing the day, month, and year.
Key
Description
Key
13
Yearly
*#
Monthly
Description
If you press these keys shortly,
you can set the alarm daily.
In case of pressing for a long
time, you can set it weekly.
Add new
You can edit maximum 30 characters. You can take a note. You can
choose the following types of note. You can make up to maximum 20
notes.
• Schedule
Input the subject, the schedule time, the repeat time, alarm time by
pressing [Select].
ENGLISH
• Memo
1. Select Add New by pressing [Select].
2. Scroll to highlight Memo.
3. Press [Select].
4. Input the memo and then press [Select].
66
Accessing the Menu
View day
Shows the note for the chosen day. Use U , D to browse through
the note lists. If you set alarm for the note, Alarm watch is displayed.
Press [Options] to delete, edit the note you selected.
View all
Shows the notes that are set for all days. Use U , D to browse
through the note lists. You can use the same menu as “View date”
by pressing [Options].
Delete past
You can delete for the last schedule already is notified you.
Delete all
You can delete for the all note(s).
Phone book [Menu 5-2]
Search
(Calling from phonebook)
1. Open the phonebook first by pressing [Names] in a standby
mode.
2. Search by Pressing [Select] to enter.
ENGLISH
67
Organizer [Menu 5]
Accessing the Menu
3. Depending on setting Search by, the below menu may not
appear.
• Name
• Number
4. You can find an entry by name and number.
5. Select [Search].
6. You can check the names and numbers by pressing [List].
7. If you want to edit, delete, copy an entry, or to add the voice to
one, select [Options]. The below menu will be displayed.
• Edit
: You can edit the name, number, E-mail, and fax
by pressing [OK].
• Delete
: You can delete an entry.
• View other
number
: You can see other phone numbers in names
you searched.
• Write message : You can write message.
• Copy
: You can copy an entry from SIM to phone or
from phone to SIM.
• Call
: You can call thru the chosen entry.
• Voice
: You can add the voice to the entry or change
the voice tag.
• Main number : You can select the one out of mobile, home,
office that you often use. The main number will
be displayed first, if you set this.
ENGLISH
68
Accessing the Menu
Add new
You can add phonebook entry by using this function.
Phone memory capacity is 200 entries. SIM card memory capacity
depends on the service provider.
You can also save 20 characters of name in the Phone memory, and
you can save characters in the SIM card. The number of character is
SIM dependent feature.
1. Open the phonebook first by pressing [Names] in standby mode.
2. Scroll to highlight Add new, and press [Select] to enter.
3. Select the memory you want to save: SIM or Phone.
• SIM
: You can add name and number for entry.
a. Write a name to add.
b. Press [OK], then you can input a number.
c. Press [OK].
d. If you want to add the voice, press [Yes].
• Phone : You can add name, mobile, home, office, fax no. and
E-mail address.
a. You can select among mobile, home and office by
pressing [select].
b. Write a name to add.
c. Enter the numbers following as mobile, home, office
by pressing [Next] for next step [Clear] for cancel
and C for saving or exit.
d. If you want to add the voice, press [Yes].
69
ENGLISH
You should speak a word within 2 seconds, and the phone asks you
to speak it again to ensure the accuracy of voice recognition. After
voice recognition has finished, Voice is attached automatically.
Organizer [Menu 5]
Accessing the Menu
Note
• The voice can only be attached to main number which you
set. For example, if you change main number voice will be
automatically attached changed number.
• You can add voice tag to phone number in SIM card.
The voice tag can be erased removing or changing SIM card.
And voice tag attached to phone number in SIM card may be
attached to another phone number when you changed SIM
card. Why? The answer is that SIM card doesn’t contain
information about voice tag.
Speed dials
You can associate any of the keys 2 to 9 with a Name list entry.
You can call directly by pressing this key for 2-3 seconds.
1. Open the phonebook first by pressing [Names] in a standby
mode.
2. Scroll to Speed dials, then press [Select] to enter this menu.
3. Every Speed dials will be displayed.
4. If you want to add Speed dials, select . Then, you can
search the name in phonebook.
5. If you select allocated name by Speed dials, you can view
following the submenus.
• Change : You can change the allocation of Speed dials
number.
ENGLISH
• Cancel
70
: You can cancel the allocated Speed dials number.
Accessing the Menu
Voice list
You can see all phone numbers which contain voice. You can also
call directly by pressing [Send]. After selecting phone number by
using U and D press [Options], you can see following the
submenus.
• Play
You can play voice which is attached to phone number.
• Change
You can change voice which is attached to phone number.
• Delete
You can delete voice which is attached to phone number.
• Call
You can call by selecting this menu.
Caller groups
You can list up to 20 members per one group. There are 7 groups
you can make lists to.
1. Press [Names] to enter into the phonebook in standby mode.
2. Scroll to Caller groups item then press [Select] to enter this
menu.
4. Select Group name that you want to manage by pressing [Select].
71
ENGLISH
3. Every Group list will be displayed.: Family, Friend, Colleague,
VIP, Group1, Group2 and Others.
Organizer [Menu 5]
Accessing the Menu
5. Then submenus below will be displayed.
• View member
- You can view the number list in Caller groups.
- You can select the member you want by pressing [Options]
then you can enable the submenu such as Edit, Delete, Write
message, Copy, Voice and Main number.
• Group ring tone
You can set the ring tone depending on Group.
• Group animation
You can set the animation for each group.
• Add member
You can add the member in Caller groups.
1. Scroll to highlight Add member, and then press [Select] to
enter.
2. The group member souldn’t be exceeded 20. Otherwise, the
error message will be displayed.
3. Press [OK] to add member.
• Delete member
You can delete the member already saved in phonebook.
• Rename
You can change group name.
ENGLISH
72
Accessing the Menu
Copy all
You can copy/move entries from SIM card memory to Phone
memory or from Phone memory to SIM card memory.
1. Open the phonebook first by pressing [Names] in standby mode.
2. Scroll to Copy all, then press [Select] to enter this menu.
3. Then submenus below will be displayed.
• SIM to Phone : You can copy the entry from SIM Card to Phone
memory.
• Phone to SIM : You can copy the entry from Phone memory to
SIM Card.
Delete all
You can delete all entries in SIM, Phone, and Voice. This function
requires Security code.
1. Press [Names] to enter into the phonebook in standby mode.
2. Scroll to Delete all, then press [Select].
3. Then select a memory to erase: SIM, Phone, Voice.
4. And then you will be requested to enter Security code.
5. Press [OK] or, press [Back] to cancel.
Settings
73
ENGLISH
You can set preferred memory which includes Variable, SIM or
Phone and preferred search which includes Variable, Name and
Number.
Organizer [Menu 5]
Accessing the Menu
1. Open the phonebook first by pressing [Names] in a standby
mode.
2. Scroll to Settings, then Press [Select] to enter.
3. Then submenus below will be displayed.
• Set memory
1. Scroll to highlight Set memory, then press [Select] to enter.
2. The three submenus are displayed.
- Variable : If you select Variable, the phone asks you
where to store whenever you add entries in
Phonebook.
- SIM
: If you select SIM, the phone stores entries to
SIM directly without asking you where to store.
- Phone : If you select Phone, the phone stores entries to
Phone directly without asking you where to
store.
• Search by
1. Scroll to highlight Search by, then press [Select] to enter.
2. The three submenus are displayed.
ENGLISH
- Variable : If you select Variable, the phone asks you how
to search the entries.
- Name : If you select Name, the phone searches entries
by name.
- Number : If you select Number, the phone searches
entries by number.
74
Accessing the Menu
Information
• Service dial number
Use this function to access a particular list of services provided by
your network operator (if supported by the SIM card).
• Memory status
This feature allows you to see how many free
and in-use are in your phonebook.
• Own number (SIM dependent)
You can check your own number in SIM card.
ENGLISH
75
Fun & Tools [Menu 6]
Accessing the Menu
Calculator [Menu 6-1]
This contains the standard functions such as +, –, *, ÷ : Add,
Subtract, Multiply, Divide.
1. Input the numbers by pressing numeric keys.
2. Press U key once for Add and long press for Multiply. Press
D key once for Subtract and long press for divide.
3. Press * key to input Prime number and # key to input
Negative number.
4. You can view the result by pressing [Result] key.
5. If you want to continue the calculation, repeat the process.
6. You can delete the number or sign you want by pressing C .
7. Press E key if you want to end the calculation process.
My folder [Menu 6-2]
All the contents downloaded through M-service or EMS such as
images, ringtones and etc, are available in the My folder menu.
In this menu you can check the contents, edit their name and,
eventually, set them as wallpapers or ringtones.
Downloaded polyphonic ringtones must be activated in this menu in
order to make them available in the audio profiles ringtones list. You
can activate just one downloaded ringtone at once.
ENGLISH
Note
You can also attach this objects in an EMS message as
described in the Write SMS chapter [Menu 1-1].
76
Accessing the Menu
Game [Menu 6-3]
The phone offers you enjoyable games to play with.
Note
The Control keys are different for each game. But each game
has screens to explain the main control key (see key info.).
Other common control keys are below.
[Common Key Function]
• < [Soft 1 Key]
: Start game, and Ok key
• C [CLR]
: Pause
• > [Soft 2 Key]
: Back
•
E [END]
• 0~9
: Exit
: Stage and level control.
• U , D [Up,down key] : Volume control
• * [Star key]
: Navigation to the left
• # [Sharp key]
: Navigation to the right
ENGLISH
77
Fun & Tools [Menu 6]
Accessing the Menu
Unit converter [Menu 6-4]
Length
This converts any measurement into a unit you
want. There are 4 types that can be converted
into units: Length, Area, Weight, and Volume.
1. You can select one of four unit types by
pressing [Next] key.
2. Select the unit you want to convert by
pressing U and D .
3. You can toggle between Current and Convert by long pressing
U and D .
4. You can input the prime number after the decimal place by
pressing #.
5. You can delete the number you want by pressing C.
6. Press E key or [Back] key if you want to end the process for
converting the value.
World time [Menu 6-5]
You can view the time for each city around the world.
when you press U , D shortly, you can view the city belonged to
the different time zone and when you press U , D long, you can
view the all of city on the same time zone.
If you want to select the country you want, press [set] key.
ENGLISH
78
WAP services [Menu 7]
Accessing the Menu
Your phone supports services based on Wireless Application
Protocol (WAP). You can access services supported by your
network. The services menu allows you to get the information such
as news, weather reports, and flight times.
Home [Menu 7-1]
You can connect to the configured homepage of the activated profile.
Bookmarks [Menu 7-2]
When you enter this menu, you can see the bookmarks. Then press
< button to access available option, or press > to exit it.
• Connect : Connect to selected bookmark.
• Add new : Add a new bookmark manually.
• Edit
: Edit the title and the address of the selected bookmark.
• Delete
: Delete the selected bookmark from the bookmark list.
Push messages [Menu 7-3]
You can receive messages related with WAP which is included URL.
So you can connect to indicated URL directly.
Inbox
You can read or delete the push messages.
• Load
: Allows you connect to a specific site using the
information in the received push message.
• Delete
: Deletes the selected push message.
79
ENGLISH
• Information : Allows you connect to a specific site using the
information in the received push message.
WAP services [Menu 7]
Accessing the Menu
Setting
You can set push the messages.
Profiles [Menu 7-4]
You can make up to 5 profiles and activate only one of them. Scroll
to the desired profile and press < to access available options.
• Activate
You can activate the selected profile.
• Settings
You can edit and change WAP settings of the selected profile.
- Homepage
This setting allows you to enter the address (URL) of the site you
want to use as homepage. You do not need to type “http://” in
front of each URL as the WAP Browser will automatically add it.
- Display image
You can select whether images on WAP cards are displayed or
not.
- Conn. type
The options for connection type are Continuous or Temporary
and depend on the gateway.
Temporary
ENGLISH
A non-confirmed (connectionless) service.
Continuous
A confirmed delivery mechanism but generates more network
traffic.
80
Accessing the Menu
- Conn. security
The options are On and Off depend on the gateway you are
using.
- Gateway information
Most of WAP gateways do not require a User ID and Password.
If your gateway need them to connect to it, then your network
should provide them, and you must set them up correctly before
trying to browse a WAP site.
- Bearer
Data
GPRS
- Data settings
The service settings are only available when Data is chosen as a
bearer service.
These values of setting are provided by your network.
IP address
: Enter the IP address of the WAP gateway you are
using to access.
Dial number : Enter the telephone number to dial to access your
WAP gateway.
: Select the type of data call.: Analogue or ISDN
(Digital).
Call speed
: The speed of your data connection.
User ID
: The user identity for your dial-up server (and NOT
the WAP gateway).
Password
: The password required by your dial-up server
(and NOT the WAP gateway) to identify you.
81
ENGLISH
Call type
WAP services [Menu 7]
Accessing the Menu
- GPRS settings
The service settings are only available when GPRS is chosen as
a bearer service.
- Linger timer
You can input timeout periods between 30sec, and 300sec. if any
data wasn’t input or transferred, the service will be unavailable.
• Rename
Edit the Profile Name.
• Email server
Save the URL of the E-mail server that you frequently use.
- Connect
Connect to the E-mail server that you configured.
- Edit address
Edit the URL of the E-mail server.
Go to URL [Menu 7-5]
You can directly connect to the site that you want. You need to enter
the specific URL that you want to directly connect.
ENGLISH
82
Accessing the Menu
Cache settings [Menu 7-6]
You can remove the contents of Cache memory and change the
Cache check mode.
Clear cache
The contents of Cache memory will be removed.
Check cache
You can change the time for checking the Cache memory.
• Always
The cache is always checked whenever URL is loaded or
navigated.
• Start only
The cache is only checked when the WAP is started.
• Off
The cache is never checked.
Security certifications [Menu 7-7]
A list of the available certificates is shown.
Reset profiles [Menu 7-8]
83
ENGLISH
You can reset all the current settings of profiles to the factory default.
Java [Menu 8]
Accessing the Menu
Applications [Menu 8-1]
Java Menu Options
Scroll to an application and select Options.
1. Open
: Launches the selected MIDlet.
2. Delete
: Deletes the selected MIDlet.
3. Update
: Accesses the server and updates the selected
MIDlet.
4. Information
: Displays information about the selected MIDlet.
5. Phone settings
: Allows you to set backlight and sound for java
game.
ENGLISH
JAVA™ is a trademark of Sun Microsystems, Inc.
84
Accessing the Menu
Memory status [Menu 8-2]
Shows the size of memory available for game and application
installations. You can also see the whole memory status of Handset.
Download [Menu 8-3]
See [Menu 7-2]. You can edit and set MIDlet server address.
Download MIDlets using WAP Browser and store them in the phone.
You can also view the list of MIDlets stored on the Applicatons
screen.
Download server address:
ENGLISH
85
Internet On-line menu
Accessing the Menu
If you are on line, you can see the following menus.
❏ Home
This is the same as [Menu 7-1].
❏ Reload
This reloads the current page.
❏ Bookmarks
This is the same as [Menu 7-2].
❏ Save as bookmarks
Save the current URL as a bookmark. You can also edit the
bookmark title.
❏ Go to URL
Same as [Menu 7-5].
❏ Go to e-mail server
Connect to the E-mail server that you configured.
❏ Set as e-mail server
Save the current URL as an E-mail server.
❏ Save image
Save the browsed image.
ENGLISH
86
How to Use Data and Fax call
Additional Functions
To be able to data or fax service, you need the communicate
software such as a data or a fax program. Before using these
functions, you need to connect your phone to a computer or make
sure that your phone is in connection with a compatible device.
Sending Data or Fax Calls
1. Connect your computer to the phone.
2. After starting the communicate software, make a call and transmit
a data or fax.
3. After the data or fax transmission, you can end the call by just
ending of the communicate software, pressing [End].
Receiving Data or Fax Calls
If you have separate numbers for voice, data and fax calls, your
phone recognizes the type of call.
Receiving Data or Fax Calls – Separate numbers
(Multi-numbers)
To use a data or a fax service, the display shows which type of call
you are receiving.
To receive a data or fax call.
1. Connect your computer to the phone.
2. After starting the communicate software, accept a call and receive
a data or fax (if it is not answered automatically).
87
ENGLISH
3. After the data or fax reception, you can end the call by just ending
of the communicate software, pressing [End].
How to Use Data and Fax call
Additional Functions
Receiving Data or Fax Calls – Single number
If you have a SIM card that does not support separate voice, data
and fax numbers, the phone does not recognize the type of incoming
call.
To use a data or a fax service, make sure that you want to receive a
data or fax call mode. You first have to set the phone to one of these
options in the call mode (Settings ➝ Call Setting ➝ Next Incoming)
sub menu.
To receive a data or fax call.
1. Press [Menu] in standby mode.
2. Select the call type you want (Voice, Data or Fax) and press
[Select].
3. Connect your computer to the phone.
4. After starting the communicate software, accept a call and receive
a data or fax (if it is not answered automatically).
5. After the data or fax reception, you can end the call by just ending
of the communicate software, pressing [End].
Once you have set your phone for a specific incoming call, it remains
set until you change it.
PC Sync
ENGLISH
PC Sync is a program for data exchange PC & Phone by data
cable. Therefore, if you want to use this function, you have to
buy accessory kit. About more detail for using guide refers to
PC Sync Help file on the PC Sync CD.
88
In call Menu
Additional Functions
During a call, the following menus will be displayed, not in a standby
mode.
1 During a call
1-1 Putting a Call on Hold
You can place a call on hold or retrieve by just pressing the [Send]
key. When a call is made or answered, press the [Send] key to place
it on hold. When a call is held, press the [Send] key to make it active.
1-2 Making a Second Call
You can get a dial number from phonebook to make a second call.
Press [Names] key then select Search. To save the dial number into
phonebook during call, press [Names] key then select Add new.
1-3 Swapping Between Two Calls
To switch between two calls, select the [Options] key, then select
Swap or just press [Send] key.
You can make one of two calls focused by pressing up/down arrow
key. If you want to end one of two calls, make the call you want to
end focused, then press [End] key when the call you want to end is
focused.
ENGLISH
89
In call Menu
Additional Functions
1-4 Answering an Incoming Call
To answer an incoming call, simply press the [Send] key.
The handset is also able to warn you of an incoming call while you
are already in a call. A tone sounds in the earpiece, and the display
will show that a second call is waiting.
If Call Waiting is on, you can put the first call on hold and answer the
second, by pressing [Send] or by selecting the [Answer] key.
You can end the current call and answer the waiting call by selecting
the [Menu] key, then End & Answer.
1-5 Rejecting an Incoming Call
You can reject an incoming call without answering by simply
pressing the [End] key.
When in a call you can reject an incoming call (1st call) by pressing
the [Menu] key and selecting Multiparty/End and Answer or by
pressing [End] key.
1-6 Controlling the volume during a call
You can control the volume during a call by pressing [Options] key
and selecting Volume followed by U or D .
1-7 Muting the Microphone
ENGLISH
You can mute the microphone during a call by pressing the [Options]
key then selecting Mute. The handset can be unmuted by pressing
the [Unmute].
When the handset is muted, the caller cannot hear you, but you can
still hear them.
90
Additional Functions
1-8 Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, for example, to allow your
handset to make use of an automated switchboard, select the
[Options] key, then DTMF On. DTMF tones can be turned off the
same way.
1-9 Calling up the messages or SIM Tool Kit
The Messages and SIM Tool kit main menu options can be reached
from the in-call menu by selecting the [Options] key, then Messages
or SIM Tool Kit (Screen name depends on the network operator’s
SIM). SIM Tool kit menu is shown only when SIM in the handset
supports SIM Tool kit service.
2 Multiparty or Conference Calls
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature.
A multiparty call can only be set up when you have one active call
and one call on hold, both calls having been answered. Once a
multiparty call is set up, calls may be added, disconnected or
separated (that is, removed from the multiparty call but still
connected to you) by the person who set up the multiparty call.
These options are all available from the in-call menu and are listed in
Section.
91
ENGLISH
The maximum callers in a multiparty call is five. Once started, you
are in control of the multiparty call, and only you can add calls to the
multiparty call.
In call Menu
Additional Functions
2-1 Making a Second Call
You can make a second call while you are already in a call. To do
this, enter the second number and press [Send]. When you get
second call the first call is automatically put on hold. You can swap
between calls by selecting the [Options] key then Swap.
2-2 Setting up a Multiparty Call
You can connect a call on hold to the currently active call to form a
multiparty call by selecting the [Options] key then Multiparty/Join
all.
2-3 Putting the Multiparty Call on Hold
To put a multiparty call on hold, select the [Options] key then
Multiparty/Hold all.
2-4 De-activate the Multiparty Call on Hold
To de-activate a multiparty call on hold, select the [Options] key then
Multiparty/Join all.
2-5 Adding Calls to the Multiparty Call
To join an active call to the held multiparty call, select the [Options]
key then Multiparty/Join all.
2-6 Displaying Callers in a Multiparty Call
ENGLISH
To scroll through the numbers of the callers who make up a
multiparty call on the handset screen, press U and D keys.
92
Additional Functions
2-7 Putting a Member of a Multiparty Call on Hold
To place one selected caller (whose number is currently displayed
on-screen) of a multiparty call on hold, select the [Options] key then
Multiparty/Exclude.
2-8 A Private Call in a Multiparty Call
To have a private call with one caller of a multiparty call, display the
number of the caller you wish to talk to on the screen, then select the
[Options] key and Multiparty/Private to put all the other callers on
hold.
2-9 Ending a Multiparty Call
The currently displayed caller of a multiparty call can be
disconnected by pressing the [End] key. To end a multiparty call,
press the [Options] key then select Multiparty/End multiparty.
Selecting the [Options] key then Multiparty/End all, will end all the
active and held calls.
2-10 Explicit Call Transfer (ECT)
If you have one caller on hold and another active call, you may
connect one call party to another call party and then leave the call.
This is done by selecting the Multiparty/Transfer option from the incall menu.
ENGLISH
93
Accessories
There are various accessories for your mobile phone. You can select
these options according to your personal communication
requirements.
Standard Battery
Portable Handsfree
This connects to your phone, allowing
handsfree operation.
Travel Adapter
This charger allows you to charge the
battery while away from home or your office.
Cigar Lighter Adapter
You can operate the phone and trickle
charge the phone's battery from your vehicle
by using the cigarette lighter charger.
ENGLISH
Neckstrap
94
Data Kit/CD
You can connect your phone to PC to
exchange the data between them.
Handsfree Kit
The handsfree car kit enables you to attach
the phone to the power jack in your car,
providing you with handsfree operation.
Note
• Information and specification in this menu is subject to
change without prior notice.
• Accessories may be different in different regions; please
check with our regional service company or agent for further
enquiries.
ENGLISH
95
Safety Guidelines
TIA Safety Information
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s
manual for CTIA Certification. Use of the remaining TIA language is
encouraged when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over 120
scientists, engineers, and physicians from universities, government
health agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
ENGLISH
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International Commission
on Non-Ionizing Radiation Protection
The design of your phone complies with the FCC guidelines (and
those standards).
96
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage
the phone and may violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
• Antenna is fixed and does not extend. This line is not necessary.
• Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the
phone to operate at a higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless phones in the
areas where you drive. Always obey them. Also, if using your phone
while driving, please:
• Give full attention to driving — driving safely is your first
responsibility;
• Use hands-free operation, if available;
• Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
97
ENGLISH
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded against
the RF signals from your wireless phone.
Safety Guidelines
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6”) inches be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations
of Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from
theirpacemaker when the phone is turned ON;
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize
thepotential for interference.
• If you have any reason to suspect that interference is takingplace,
turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids.In the event of such interference, you may want to consult your
service provider.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
ENGLISH
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external
RF energy.
98
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn your
phone OFF before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF
when in a “blasting area” or in areas posted: “Turn off two-way
radio”. Obey all signs and instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
99
ENGLISH
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains chemicals
or particles (such as grain, dust, or metal powders); and any other
area where you would normally be advised to turn off your vehicle
engine.
Safety Guidelines
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including
either installed or portable wireless equipment, in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious
injury could result.
TIA Safety Information
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
1.Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe. Wireless
phones emit low levels of radiofrequency energy (RF) in the
microwave range while being used. They also emit very low levels of
RF when in the standby mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been
confirmed by additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in determining the
reasons for inconsistent results.
ENGLISH
100
2.What is the FDA's role concerning the safety of wireless
phones?
Under the law, the FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices. However,
the agency has authority to take action if wireless phones are shown
to emit radiofrequency energy (RF) at a level that is hazardous to the
user. In such a case, the FDA could require the manufacturers of
wireless phones to notify users of the health hazard and to repair,
replace, or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of
the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure
to the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use on
human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF safety to
ensure coordinated efforts at the federal level. The following
agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
101
ENGLISH
• Environmental Protection Agency
Safety Guidelines
The National Institutes of Health participates in some interagency
working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that are
sold in the United States must comply with FCC safety guidelines
that limit RF exposure. The FCC relies on the FDA and other health
agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the subject of the safety questions discussed in
this document.
3.What kinds of phones are the subject of this update?
ENGLISH
The term “wireless phone” refers here to handheld wireless phones
with built-in antennas, often called “cell”, “mobile”, or “PCS” phones.
These types of wireless phones can expose the user to measurable
radiofrequency energy (RF) because of the short distance between
the phone and the user’s head. These RF exposures are limited by
FCC safety guidelines that were developed with the advice of the
FDA and other federal health and safety agencies. When the phone
is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly
with increasing distance from the source. The so-called “cordless
phones,” which have a base unit connected to the telephone wiring
in a house, typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
102
4.What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radiofrequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none of
the studies can answer questions about long-term exposures, since
the average period of phone use in these studies was around three
years.
ENGLISH
103
Safety Guidelines
5.What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time tumors
develop — if they do — may be many, many years. The
interpretation of epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of wireless
phones. Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about the possible
health effects of wireless phone RF?
ENGLISH
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important questions
about the effects of exposure to radiofrequency energy (RF). The
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception
in 1996. An influential result of this work has been the development
of a detailed agenda of research needs that has driven the
establishment of new research programs around the world. The
project has also helped develop a series of public information
documents on EMF issues.
104
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone
safety. The FDA provides the scientific oversight, obtaining input
from experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts with
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The CRADA
will also include a broad assessment of additional research needs in
the context of the latest research developments around the world.
7.How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
105
ENGLISH
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal health
and safety agencies. The FCC limit for RF exposure from wireless
telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts
per kilogram (1.6 W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and Electronic
Engineering (IEEE) and the National Council on Radiation Protection
and Measurement. The exposure limit takes into consideration the
body’s ability to remove heat from the tissues that absorb energy
from the wireless phone and is set well below levels known to have
effects. Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/ rfsafety) gives directions for locating
the FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
Safety Guidelines
8.What has the FDA done to measure the radio frequency
energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio frequency
energy (RF) exposure from wireless phones and other wireless
handsets with the participation and leadership of FDA scientists and
engineers. The standard, “Recommended Practice for Determining
the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body
Due to Wireless Communications Devices: Experimental
Techniques,” sets forth the first consistent test methodology for
measuring the rate at which RF is deposited in the heads of wireless
phone users. The test method uses a tissue-simulating model of the
human head. Standardized SAR test methodology is expected to
greatly improve the consistency of measurements made at different
laboratories on the same phone. SAR is the measurement of the
amount of energy absorbed in tissue, either by the whole body or a
small part of the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a wireless
phone complies with safety guidelines.
9.What steps can I take to reduce my exposure to
radiofrequency energy from my wireless phone?
ENGLISH
If there is a risk from these products — and at this point we do not
know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few
simple steps to minimize your exposure to radiofrequency energy
(RF). Since time is a key factor in how much exposure a person
receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure.
106
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the
source of the RF, since the exposure level drops off dramatically with
distance. For example, you could use a headset and carry the
wireless phone away from your body or use a wireless phone
connected to a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if you are
concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure
from wireless phone use.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps
to lower exposure to radiofrequency energy (RF), the measures
described above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will
reduce RF exposure. Some groups sponsored by other national
governments have advised that children be discouraged from using
wireless phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a
wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that any health
hazard exists.
11.What about wireless phone interference with
Radio frequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, the FDA helped develop a
detailed test method to measure electromagnetic
107
ENGLISH
medical equipment?
Safety Guidelines
interference (EMI) of implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by the FDA,
medical device manufacturers, and many other groups, was
completed in late 2000. This standard will allow manufacturers to
ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. The FDA has tested hearing aids for
interference from handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test methods
and performance requirements for hearing aids and wireless phones
so that no interference occurs when a person uses a “compatible”
phone and a “compatible” hearing aid at the same time. This
standard was approved by the IEEE in 2000. The FDA continues to
monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the interference and
work to resolve the problem.
12.Where can I find additional information?
For additional information, please refer to the following resources:
ENGLISH
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
108
Consumer Information on SAR (Specific Absorption Rate)
This Model Phone Meets the Government’s Requirements for
Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government. These
limits are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are
conducted using standard operating positions specified by the
FCC with the phone transmitting at its highest certified power level
in all tested frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. Because
the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the
closer you are to a wireless base station antenna, the lower the
power output.
109
ENGLISH
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
Safety Guidelines
model. The highest SAR value for this model phone when tested
for use at the ear is 0.31 W/kg and when worn on the body, as
described in this user’s manual, is 0.13 W/kg. (Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements.) While there may be
differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID BEJG5300S.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) website at http://www.wow-com.com
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
ENGLISH
110
Technical Data
General
Product Name : G5300S
System
: GSM 900/DCS 1800
Ambient Temperatures
Max : +55°C
Min : -10°C
ENGLISH
111
ENGLISH
112
Memo
ENGLISH
113
Memo
ENGLISH
114

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:08:20 11:42:20-04:00
Create Date                     : 2003:08:19 17:56:53-04:00
Title                           : <00000>G5300S_½ºÆä_¿µ_Ç¥Áö
Author                          : F2
Creator                         : QuarkXPress3.3k: AdobePS 8.8.0 (301)
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 114
Mod Date                        : 2003:08:20 11:42:20-04:00
Creation Date                   : 2003:08:19 17:56:53-04:00
Metadata Date                   : 2003:08:20 11:42:20-04:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools