LG Electronics USA GEN21CA AVN Modem Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3293642
Application ID	KDTJHdD+8XVL/9GxK5wuJw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.06kB (400715 bits)
Date Submitted	2017-02-23 00:00:00
Date Available	2017-04-23 00:00:00
Creation Date	2017-02-22 16:22:30
Producing Software	Microsoft® Word 2013
Document Lastmod	2017-02-22 16:22:30
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	KTKIM

Technical Specification
(TM03LNCAHK0)
1/13
History
Ver.
Date
1.0
2016.12.16
Written
by
Contents
2/13
Checked
by
Approved
by
Note
Contents
1. Product Introduction..................................................................................................... 4
1.1 Block Diagram .................................................................................................... 5
1.2 Environmental Specifications.............................................................................. 5
1.3 Electrical Specifications ...................................................................................... 5
1.3.1 Absolute Maximum and ESD Ratings........................................................... 5
1.3.2 Current Consumption ................................................................................... 6
1.4 Mechanical Specifications ................................................................................. 6
1.4.1 Physical Dimensions and Connection Interface ........................................... 6
1.4.2 Mechanical Drawing ..................................................................................... 7
2. Pin Definitions.............................................................................................................. 8
3 RF Specification ........................................................................................................... 9
3.1. LTE B4, B13 Specification ................................................................................. 9
3.2. WCDMA B2, B5 Specification....…………………………………………………… 10
3/13
1. Product Introuction
The TM03LNCAHK0 are designed for the automotive industry. They support LTE and
CDMA air Interface standards. The TM03LNCAHK0 are based on the Qualcomm
MDM9628 wireless chipsets and support the following bands.
Table 1.
Supported Band
Region
Canada
LTE
B2/B4/B5/B17
WCDMA
B2/B5
Band
1.1 Block Diagram
Figure 1.1. TM03LNCAHK0 Block diagram
4/13
1.2 Environmental Specifications
The environmental specification for operating and storage of the TM03LNCAHK0 are
defined in the the table below.
Table 2.
Environmental Specifications
Parameter
Temperature Range
Operating Temperature
-40℃ to 85℃
Storage Temperature
-40℃ to +90℃
Humidity
95% or less
1.3 Electrical Specifications
This section provides details for some of the key electrical specifications of the
TM03LNCAHK0 embedded modules.
1.3.1 Absolute Maximum Rating and ESD Ratings
This section defines the Absolute Maximum and Electrostatic Discharge (ESD) Ratings of the
TM03LNCAHK0 embedded modules.
Warning:
device.
If these parameters are exceeded, even momentarily, damage may occur to the
Table 3. Absolute Maximum Ratings
Parameter
+4.0_VPWR
VIN
Power Supply Input
Voltage on any digital input or output pin
Min
Max
Units
4.4V
VREG_MDME+0.5
10
kV
ESD Ratings
ESD1)
Primary, Diversity antenna pads - Contact
1) The ESD Simulator configured with 330pF, 2000Ω.
Caution: The TM03LNCAHK0 embedded modules are sensitive to Electrostatic Discharge.
ESD countermeasures and handling methods must be used when handling the
TM03LNCAHK0 devices.
5/13
1.3.2 Current Consumption
Table 4. TM03LNCAHK0 Current Consumption
Mode
Parameter
Typical
Max
Band2, Max TX Output /Full RB
600
650
Band4, Max TX Output /Full RB
600
650
Band5, Max TX Output /Full RB
550
600
Band17, Max TX Output /Full RB
550
600
Band2
600
650
Band5
550
600
LTE
Idle, Registered
1.8
2.2
mA
WCDMA
Idle, Registered
1.8
2.2
mA
LTE
Sleep Mode, Average Current
1.8
2.2
mA
WCDMA
Sleep Mode, Average Current
1.8
2.2
mA
LTE
WCDMA
Units
mA
mA
1.4 Mechanical Specifications
1.4.1 Physical Dimensions and Connection Interface
The TM03LNCAHK0 embedded modules are a Land Grid Array (LGA) form factor device. The
device does not have a System or RF connectors. All electrical and mechanical connections
are made via the 323 pad TM03LNCAHK0 on the underside of the PCB.
Table5. TM03LNCAHK0 Embedded Module Dimensions
Parameter
Nominal
Max
Overall Dimension
Overall Module Height
PCB Thickness
Flatness Specification
Weight
34 x 40
3.5
1.0
34.35 x 40.35
3.85
1.1
0.1
TBD
6/13
Units
mm
mm
mm
mm
1.4.2 Mechanical Drawing
1.4.2.1 Carrier PCB
[TOP View]
[Bottom View]
7/13
2. Pin Definitions
Table6. PIN Definitions
8/13
3. RF Specification
The specifications for the LTE and CDMA interfaces are defined.
TM03LNCAHK0 is designed to be compliant with the standard shown in the table below.
Table20. Standards Compliance
Technology
Standards
LTE
• 3GPP Release 8
WCDMA
• 3GPP Release 9
3.1 LTE B2, B4, B5, B17 Specification
3.1.1 LTE TX Output Power
The Maximum / Minimum Transmitter Output Power of the TM03LNCAHK0 are specified in
the following table.
Table21. Conducted TX (Transmit) Max output Power Tolerances – LTE Bands
BAND
BAND2
UE Maximum
Output Power
BAND4
UE Maximum
Output Power
BAND5
UE Maximum
Output Power
BAND17
UE Maximum
Output Power
Method (UL CH)
Specification
Measure Max and Min and Min Transmit Power of
Low Channel (18650)
Measure Max and Min Transmit Power of Mid
Channel (18900)
Measure Max and Min Transmit Power of High
Channel (19150)
Measure Max and Min and Min Transmit Power of
Low Channel (20000)
Measure Max and Min Transmit Power of Mid
Channel (20175)
Measure Max and Min Transmit Power of High
Channel (20350)
Measure Max and Min and Min Transmit Power of
Low Channel (20450)
Measure Max and Min Transmit Power of Mid
Channel (20525)
Measure Max and Min Transmit Power of High
Channel (20600)
Measure Max and Min and Min Transmit Power of
Low Channel (23780)
Measure Max and Min Transmit Power of Mid
Channel (23790)
Measure Max and Min Transmit Power of High
Channel (23800)
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
Max Power : 20.3~25.7dBm
Min Power : ≤ -39dBm
3.1.2 LTE RX Sensitivity
The Receiver Sensitivity of the TM03LNCAHK0 are specified in the following table.
9/13
Table22. Conducted RX (Receive) Sensitivity – LTE Bands
BAND
BAND2
Reference
sensitivity
level(DUAL)
BAND4
Reference
sensitivity
level(DUAL)
BAND5
Reference
sensitivity
level(DUAL)
BAND17
Reference
sensitivity
level(DUAL)
Method (DL CH)
Specification
Measure BLER of Low Channel (650)
Measure BLER of Mid Channel (900)
Measure BLER of High Channel (1150)
Measure BLER of Low Channel (2000)
Measure BLER of Mid Channel (2175)
Measure BLER of High Channel (2350)
Measure BLER of Low Channel (2450)
Measure BLER of Mid Channel (2525)
Measure BLER of High Channel (2600)
Measure BLER of Low Channel (5780)
Measure BLER of Mid Channel (5790)
Measure BLER of High Channel (5800)
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-97
BLER : ≤ 5%
sensitivity : ≤-97
BLER : ≤ 5%
sensitivity : ≤-97
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
sensitivity : ≤-94
BLER : ≤ 5%
3.2 WCDMA B2/B5 Specification
3.2.1 WCDMA TX Output Power
The Maximum Transmitter Output Power of the TM03LNCAHK0 are specified in the
following table.
Table23. Conducted TX (Transmit) Max output Power Tolerances – WCDMA Bands
Item
WCDMA B2
Power Level
WCDMA B5
Power Level
Method (DL CH)
Specification
Measure Max Transmit Power of Low Channel
(CH= 10563)
Measure Max Transmit Power of Middle Channel
(CH= 10700)
Measure Max Transmit Power of High Channel
(CH= 10837)
Measure Max Transmit Power of Low Channel
(CH=25)
Measure Max Transmit Power of Middle Channel
(CH=600)
Measure Max Transmit Power of High Channel
(CH=1175)
Max Power : 20.3~25.7dBm
10/13
Max Power : 20.3~25.7dBm
Max Power : 20.3~25.7dBm
Max Power : 20.3~25.7dBm
Max Power : 20.3~25.7dBm
Max Power : 20.3~25.7dBm
3.2.2 WCDMA RX Sensitivity
The Receiver Sensitivity of the TM03LNCAHK0 are specified in the following table.
Table24. Conducted RX (Receive) Sensitivity –WCDMA Bands
Item
Method (DL CH)
Specification
Measure BER of Low Channel (CH= 10563)
WCDMA B2
Power Level
Measure BER of Low Channel (CH= 10700)
Measure BER of Low Channel (CH= 10837)
Measure BER of Low Channel (CH=25)
WCDMA B5
Power Level
Measure BER of Low Channel (CH=600)
Measure BER of Low Channel (CH=1175)
11/13
0.1% @≤-106dBm
0.1% @≤-106dBm
0.1% @≤-106dBm
0.1% @≤-106dBm
0.1% @≤-106dBm
0.1% @≤-106dBm

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
RF Exposure Statement
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm
is maintained between the radiator (antenna) and all persons at all times. This device must
not be co-located or operating in conjunction with any other antenna or transmitter.
The highest permitted antenna gains including cable loss for use with this device are: WCDMA850 :
0.89 dBi, WCDMA 1900 : 3.20 dBi, LTE Band 4: 2.41 dBi, LTE Band 2: 3.20 dBi, LTE Band 5: 0.89 dBi,
LTE Band 17: -1.44 dBi
End Product Labeling
The module is labeled with its own FCC ID. If the FCC ID is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. In that case, the final
end product must be labeled in a visible area with the following:
“Contains FCC ID: BEJGEN21CA
“Contains IC: 2703H-GEN21CA
OEM Responsibilities to comply with FCC Regulations
The module has been certified for integration into products only by OEM integrators under
the following condition:
- The antenna(s) must be installed such that a minimum separation distance of at least 20
cm is maintained between the radiator (antenna) and all persons at all times.
- The transmitter module must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
As long as the two condition above is met, further transmitter testing will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example, digital
device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can ’ t be met (for certain
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can’t be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
Manual Information To the End UserThe OEM integrator has to be aware not to provide information to
the end user regarding
how to install or remove this RF module or change RF related parameters in the user
manual of the end product.
l'exposition aux RF
L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum
de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique.
É tiquetage du produit final
Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro de
certification IC. Si l’identification FCC et le numéro de certification IC ne sont pas visibles lorsque
le module est installé à l’intérieur d’un autre dispositif, la partie externe du dispositif dans lequel
le module est installé devra également présenter une étiquette faisant référence au module inclus.
Dans ce cas, le produit final devra être étiqueté sur une zone visible avec les informations
suivantes :
« Contient module émetteur identification FCC ID : BEJGEN21CA
« Contient module émetteur IC : 2703H-GEN21CA
12/13
RSS-GEN, Sec. 8.3
This radio transmitter (identify the device by certification number, or model number if Category II) has
been approved by Industry Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de
modèle s’il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner
avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance
requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain
est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
13/13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 13
Language                        : ko-KR
Tagged PDF                      : Yes
Author                          : KTKIM
Creator                         : Microsoft® Word 2013
Create Date                     : 2017:02:22 16:22:30+09:00
Modify Date                     : 2017:02:22 16:22:30+09:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools