LG Electronics USA GW525G Cellular/PCS GSM/EDGE/WCDMA Phone with Bluetooth User Manual 1

LG Electronics USA Cellular/PCS GSM/EDGE/WCDMA Phone with Bluetooth Users Manual 1

Contents

Users Manual 1

GW525 User GuideSome of the contents in this manual may differ from your phone depending on the software of the phone or your service provider.GW525g
Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void        the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device is not intended for sale in the USA.
Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rules.Operation is subject to the following two conditions:(1) This device & its accessories may not cause harmful interference.(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the user’s body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79inches(2.0cm) must be maintained from the user's body.Additionally, Belt clips, holsters & other body-worn accessories may not containmetallic components.
8  |  User GuideGetting to know your phoneCharger, cable and handsfree connectorCall key•  Dials a phone number and answers incoming calls.Multi-tasking keyEnd/ Power key•  Ends or rejects a call. Turns the phone on/off. Press once to return to the standby screen.WARNING: Putting a heavy object on the phone or sitting on it while it is in your pocket can damage the phone’s LCD and touch screen functionality.Side keys•  When the screen is idle: volume of ring and touch tone.•  During a call: earpiece volume.TIP: To connect the USB cable, wait until the phone has powered up and has registered to the network. Micro SD memory card socketLock/Unlock keyCamera key
9Change the  text input mode  (capital/ small)Alpha numeric keysSpace keyUse to enter a space when editing.Clear key •  Clears a character each time it is pressed. Hold the key down to clear all input.Enter keySymbol key•  Enters symbolic characterOpen view
10   |  User GuideOpen viewBattery SIM card socketCamera lensBattery cover
11Installing the SIM and battery1 Remove the battery coverSlide the battery cover towards the top and away from the phone.2 Remove the batteryUsing the cut-out at the bottom, lift it from the battery compartment. WARNING: Do not use your ngernail to remove the battery. WARNING: Do not remove the battery when the phone is switched on, as this may damage the phone.
12   |  User GuideInstalling the SIM and battery3   Install the SIM cardSlide the SIM card into the SIM card holder making sure that the gold contact area on the card is facing downwards. To remove the SIM card, gently pull it outwards.4 Install the batteryFirst insert the top of the battery into the top edge of the battery compartment. Ensure that the battery contacts align with the phone’s terminals. Press the bottom of the battery down until it clicks into place.
135 Charging your phoneLift and twist the charger socket cover on the top of your GW525g. Insert the charger and plug it into a mains socket. Your GW525g needs to be charged until the “Battery full” message appears on the screen.
14   |  User GuideMemory cardInstalling a memory cardYou can increase the memory space on your phone by using a Micro SD memory card.  NOTE: A memory card is an optional accessory.1   Open the memory card slot cover on the right-hand edge of the phone.2   Slide the memory card into the slot until it clicks into place. Make sure the gold contact area is facing downwards.3   Close the cover.Formatting the memory cardYour memory card may already be formatted. If it isn’t, you will need to format it before you can start to use it.1   From the standby screen select , then touch  and choose Phone settings.2   Touch Memory manager then choose External memory.3   Touch Format and then confirm your choice.4   Enter the password, if one has been set. The card will then be formatted and ready to use.TIP! To change your default storage destination, open Memory manager from the Phone settings menu and select the Primary storage settings.
15NOTE: If your memory card already contains files, they will automatically be put in the correct folder; for example, videos will be stored in the My Videos folder.Transferring your contactsTo transfer your contacts from your SIM to your phone:1   From the Communication menu, select   and choose Settings.2   Touch Copy.3   Choose SIM to handset.4   Choose Select all or choose names one by one and touch Copy.
16   |  User GuideMenu mapTouch   on the standby screen to open the Main menu. From here you can access further menus: Communication, Entertainment, Utilities and Settings.  Communication  1 Contacts  2 Recent history  3 Messaging  4 Email  5 Dialling  6  Windows Live Messenger  Entertainment  1 Camera  2 Video camera  3 Gallery  4 My stuff  5 Music  6 Muvee studio  7 Games & Apps  8 FM radio  Utilities  1 Browser  2 Google  3 Alarm  4 Organiser  5 Memo  6 Voice recorder  7 Tools  Settings  1 Profiles  2 Screen settings  3 Phone settings  4 Call settings  5 Bluetooth  6 Touch settings  7 Connectivity
17Your standby screenFrom here you can access all the menu options, make a quick call, view the status of your phone and much more.Touch screen tipsThe standby screen is also a great place to get accustomed to the touch screen.To select an item, touch the centre of the icon. Your GW525g will vibrate slightly when it recognises you have touched an option.To scroll through lists, touch the last item visible and slide your finger up the screen. The list will move up to display more items.•  There is no need to press too hard; the touchscreen is sensitive enough to pick up on a light, firm touch.•  Use the tip of your finger to touch the option you require. Be careful not to touch any other options around it.•  When the screen back light is off, press the Unlock/Lock key on the right hand side to bring back the home screen.•  Don’t cover the phone with a case or cover. The touchscreen won’t work if any material is covering it.•  There are two types of idle screen. Flick left or right to change your idle screen type on the standby screen.1   Widget idle - When you touch  , the mobile widget panel appears. You can drag icons displayed on the widget panel to the main screen.2   Livesquare - On the Livesquare screen, making a call, sending a message and saving a number is easy using the number allocated to an avatar  To use the call, message or Contacts function, select an avatar and choose the Quick key icon you want to use.
18   |  User GuideYour standby screenThe quick keysThe quick keys provide easy, one-touch access to your most used functions.Touch it to bring up the touch dialling pad, which lets you make a call. Enter the number as you would on a normal key pad and touch   or press the   hard key. Touch to open your Contacts. To search for the number you want to call, enter the name of the contact at the top of the screen using the touchpad. You can also create new contacts and edit existing ones. Touch to access the Messaging options menu. From here you can create a new SMS or MMS or view your message folder. Touch to open the full main menu, which is divided into four vertical sub-menus. Touch the tab for each sub-menu to view further options.
19The status barThe status bar uses various icons to indicate things like signal strength, new messages and battery life, as well as telling you whether your Bluetooth or GPRS is active.Below is a table which explains the meaning of the icons you are most likely to see in the status bar.Icon DescriptionMulti-taskingNetwork signal strength (number of bars will vary)No network signalRemaining battery lifeBattery flatNew text messageNew voice messageMessage inbox is fullIcon DescriptionMessage sending failedAn alarm is setCustomised profile in use (number in the icon will vary)Normal profile in useOutdoor profile in useSilent profile in useHeadset profile in useCalls are divertedEDGE in useRoamingFlight mode is onBluetooth is activeBGM playBGM pause
20   |  User GuideYour standby screenChanging your status from the status barTouch the status bar to open the Status Summary. It shows the current time, network, SVC ID, battery, handset memory, external memory, profile, MP3 and Bluetooth status. Here you can set the Profile type, play/pause MP3s and activate/deactivate Bluetooth.Using the Multi-tasking functionPress the Multi-tasking hard key  to open the Multi-tasking menu. From here you can view all applications that are running and access them with one touch.When an application is running in the background (e.g. a game or the FM radio),   will appear on the status bar.
21CallsMaking a call1   Touch   to open the keypad.2   Key in the number using the keypad. To delete a digit touch the clear key.3   Press    on the key pad or the  hard key to initiate the call.4   To end the call press the   hard key.TIP! To enter + for making an international call, press and hold   .TIP! Press the lock/unlock hard key   to lock the touchscreen and prevent calls being made by mistake.TIP! To bring up the keypad during a call, press .TIP! Touch to unlock. You can unlock the phone by holding down the button until the screen is able to work or pressing the Unlock hard key .TIP! You can send a message, save a number and search contacts by tapping  .Changing the dialling keypad display settings1   Touch   to open the keypad.2   Touch   and select Dial screen setting to change the dialling pad display.3   You can change the size and colour.
22   |  User GuideCalling your contacts1   From the standby screen touch   to open the Contacts.2   Tap the search field box and enter the first few letters of the contact you would like to call. 3   From the filtered list, touch the contact you want to call and select the number to use if there is more than one for that contact.4   Press the   hard key.Answering and rejecting a callWhen your phone rings press the  hard key or touch   to answer the call.Tap   to mute the ringing. This is useful if you forgot to change your profile to Silent for a meeting.Press the   hard key or touch   to reject an incoming call.Adjusting call volumeTo adjust the volume during a call, use the up and down button on the left edge of the phone. Speed dialling You can assign a frequently-called contact to a speed dial number.1   From the standby screen touch   and select Contacts in the Communication menu and then tap Speed dials.2    Your voicemail is already set to speed dial 1. You cannot change this. Touch any other number to assign it to a speed dial contact.3    Your Contacts will open. Select the contact you want to assign to that number by touching their phone number once. To find a contact tap the search field box and enter the first letter of the name of the contact required.Calls
23Making a second call1   During your initial call, touch   and select the number you want to call.2    Dial the number or search your contacts.3   Press   to connect the call.4   Both calls will be displayed on the call screen. Your initial call will be locked and the caller put on hold.5   To change between the calls, touch   and choose Swap call or press the number of the held call.6   To end one or both calls press and select End followed by All, Held or Active.TIP! You can combine your calls by selecting Accept then Join. Check that your network provider supports conference calling.NOTE: You will be charged for each call you make.Turning off DTMFDTMF lets you use numerical commands to navigate menus within automated calls. DTMF is switched on by default. To turn it off during a call (to make a note of a number for example) touch   and select DTMF off.Viewing your call logsTIP! To scroll through a list of options, touch the last item visible and slide your nger up the screen. The list will move up to display more items.Touch   and tap   in the Communication menu.  Choose to view:All   - View a complete list of all your dialled, received and missed calls.Dialled   - View a list of all the numbers you have called.
24   |  User GuideCallsReceived   - View a list of all the numbers that have called you.Missed   - View a list of all the calls you have missed.TIP! From any call log, touch   and Delete all to delete all recorded items.TIP! Touch any single call log entry to view the date, time and duration of the call.Using call divert1   Touch   , select   and choose  .2    Touch Call divert.3    Choose whether to divert all calls when the line is busy, when there is no answer or when you cannot be contacted.4    Enter the number you want to divert to.5   Touch Request to activate.NOTE: Diverting calls will incur charges. Please contact your network provider for details.TIP! To turn o all call diverts, select Deactivate all from the Call divert menu.Call waitingIf call waiting is activated, the handset is also able to warn you about an incoming call when you are already on a call.Using call barring 1   Touch   , select   and choose  .2   Touch Call barring.3   Choose any or all of the six options:All outgoingOutgoing internationalOutgoing international calls except to home countryAll incoming
25Incoming when abroadDeactivate all4   Enter the call barring password. Please check with your network operator about this service. Fixed dial numberSelect Fixed dial numbers to turn on and compile a list of numbers that can be called from your phone. You’ll need your PIN2 code from your operator. When activated, only numbers included in the fixed dial list can be called from your phone.Using Excuse messageYou can send a message to explain why you do not receive an incoming call using “ Excuse message “ before you reject an incoming call. Call costs View the charges applied to your dialled numbers (this service is network-dependant and some operators are unable to support it).Call durationsView the duration of all your dialled and received calls or both.Data volumeView the amount in kilobytes of all received data, sent data or both.TIP! Select Fixed dial number to turn on and compile a list of numbers that can be called from your phone. You’ll need your PIN2 code from your operator. Only numbers included in the xed dial list can be called from your phone.Changing the common call setting1   Touch   , select   and choose  .2    Touch Common settings. From here you can adjust the settings for:
26   |  User GuideCallsCall reject - Slide the switch to On to highlight the Reject list. You can touch the text box to choose from all calls, specific contacts or groups, those from unregistered numbers (those not in your contacts), or no caller ID. Touch Save to change this setting.Send my number - Choose whether to display your number on an outgoing call.Auto redial - Slide the switch left for On or right for Off.Answer mode - Choose whether to answer the phone using the send key or any key.Minute minder - Slide the switch left to On to hear a tone every minute during a call.BT answer mode - Select Hands-free to be able to answer a call using a Bluetooth headset, or select Handset to press a handset key to answer a call.Save new number - Select Yes to save a new number. TIP! To scroll through a list of options, touch the last item visible and slide your nger up the screen. The list will move up to display more items.
27Searching for a contactThere are two ways to search for a contact:From the standby screen1   From the standby screen touch   to open the contacts. 2   Touch   next to the contact you would like to call. This is only available when you set the Quick command key as Make voice call in Contact list settings.From the main menu1   Touch  . 2   Touch   in the Communication menu and select Search.3   Your contacts will bring up a list of contacts corresponding to the letters you have entered.Adding a new contact1   From the standby screen touch  and touch Add contact.2   Choose whether to save the contact to your Handset or SIM.3   Enter the first and last name of your new contact. You do not have to enter both, but you must enter at least one.4   You can enter up to five different numbers per contact. Each entry is assigned a preset type: Mobile, Home, Office, Pager, Fax, VT or General. When you have finished, touch Close.5   Add an email address.6   Assign the contact to one or more groups, choosing between No group, Family, Friends, Colleagues, School or VIP.7   You can also add a Ringtone, Birthday, Anniversary, Homepage, Home address, Company name, Job title, Company address or a Memo.8   Touch Save to save the contact.TIP! You can create customised groups for your contacts.Contacts
Contacts28   |  User GuideContact optionsThere are many things you can do when viewing a contact. Here is how to access and use the options menu:1   Open the contact you would like to use. 2   You can edit the contact or send a message directly from here.3   Press   to open the list of options.Delete - Delete the contact. Touch Yes if you are sure.Copy or Move to SIM/Handset - Choose to move or copy to the SIM card or handset (depending on where you originally saved the contact).Send business card - Send the contact’s details to another person as a business card. Choose to send as a Text message, Multimedia msg, Email or via Bluetooth.TIP! Send message - Send a message to the contact. If the contact has an email address, select whether you’d like to send an email or SMS/MMS. Creating a group1   Touch  .2   Touch   in the Communication menu then Groups.3   Touch  .4   Select Add group.5   Enter a name for your new group in the Name field.6   Touch Save. You can also assign a ringtone to the group.NOTE: Even if you delete a group, the contacts which were assigned to that group will not be lost. They will remain in your contacts.
29Changing your contact settingsYou can adapt your contact settings so that your contacts suits your own preferences.1   From the standby screen, touch   in the Communication menu.2   Touch   and select Settings.3   From here, you can adjust the following settings:Contact list settings - Choose whether to view contacts saved to both your Handset and SIM, Handset only or SIM onlyYou can also choose to show the first name or last name of a contact first and whether to display a quick command key next to the contact or not.Copy - Copy your contacts from your handset to your SIM or from your SIM to your handset.You can choose all contacts by touching Select all or select each contact to copy one by one.Move - This works in the same way as Copy, but the contact will only be saved to the location you’ve moved it to. So if you move a contact from the SIM to the handset it will be deleted from the SIM memory.Send all contacts via Bluetooth - Send all your contacts to another device using Bluetooth. Bluetooth will be automatically turned on if you select this option. Backup and Restore contacts - Backup and restore contacts to the Memory Card.Clear contacts - Delete all your contacts on your handset or SIM. Touch Yes if you are sure you want to delete all your contacts from your contacts.Viewing information1   From the standby screen, touch   in the Communication menu.2   Touch   and select Information.
30   |  User GuideContacts3   From here you can view your Service dial numbers, your Own number, your Memory info. (how much memory space you’ve got left) and My business card.TIP! To add your own business card, select My business card and enter your details as you would for any contact. Touch Save to nish.
31MessagingMessagingYour GW525g combines SMS and MMS into one intuitive and easy to use menu.There are two ways to enter the messaging centre:Touch   from the standby screen,or touch   from the standby screen and choose  in the Communication menu.Sending a message1   Touch   and choose New message to open a blank message.2   From here you can send an SMS or MMS. To send an email, touch   from the standby screen, then  in the Communication menu. 3    To send an SMS or MMS, touch New message. In case of Email. Touch New Email.4    Touch Insert to add an image, video, sound, template etc.5   Touch To(1) at the top of the screen to enter the recipient’s number, or touch the search icon to open your contacts. You can add multiple contacts. Touch Send when ready.  WARNING: If an image, video or sound is added to an SMS it will be automatically convert to an MMS and you will be charged accordingly.TIP! Quick reply - Send a reply to the selected message promptly, using a template.
32   |  User GuideEntering textThere are three ways to enter text:T9 text mode/ Normal text mode/Qwerty keypad.  Touch to turn T9 predictive text on or off.  You can choose the writing language.  Tap to change between the number, symbol and text keypad. Use   to scroll through the different keyboards in each text entry mode (e.g., capital or lower case letters) when the screen is in Landscape mode.To enter a space touch  .To delete a character or remove the sentence, touch clear   .TIP! Simply touch each letter to write your message and press: to switch to upper case  to add a spaceT9 predictiveIn T9 mode, you will see  .T9 uses a built-in dictionary to recognise your words based on the key sequences you touch. Simply touch the number key associated with the letter you want to enter, and the dictionary will predict the word you want to use. For example, press 8, 3, 5, 3, 7, 4, 6, 6, 3 to write ‘telephone’.If the word you want doesn’t appear, touch Spell. If you touch Messaging
33Spell you can then enter the word using Abc manual mode and your word or name will be added to the dictionary.Abc manualIn Abc mode, you will see  .  In Abc mode you must touch the key repeatedly to enter a letter if T9 mode is switched off. For example, to write ‘hello’, touch 4 twice, 3 twice, 5 three times, 5 three more times, then 6 three times.Qwerty keypadEntering textYou can enter alphanumeric characters using the phone’s keypad. For example, storing names in Contacts, writing a message and creating scheduling events in the calendar all require you to enter text. The following text nput methods are available on the phone: ABC manual mode and 123 mode.TIP! Some elds may allow only one text input mode (e.g. telephone number in contacts elds).To enter a symbol in the text entry field, press the   key and select a symbol, then select OK.Scroll using the navigation keys to show more symbol options.Separate each word with a space by pressing  .To delete a character, press the   key.Text input mode using the keypadWhen you are required to enter text, for example when writing a message, the keypad will default to ABC mode. If you are entering a number, for example when making a call, the keypad number keys will default to numbers.In ABC mode, you can enter numbers by first pressing   and then the number you require.
Messaging34   |  User GuideSetting up your emailYou can stay in touch on the move using email on your GW525g. It’s quick and simple to set up a POP3 or IMAP4 email account.TIP! To scroll through a list of options, touch the last item visible and slide your nger up the screen. The list will move up to display more items.1   Touch   .2   Select   from the Communication menu then  . 3   Touch Add Account.4   The Setup Wizard will help you set up your email settings.  If no email account is set, you can set one up by using the email set-up wizard.5   You can now choose how to set up your account:Email address - Enter email addressServer address - Enter server address (Microsoft Exchange only).Domain - Enter domain (Microsoft Exchange only).Username - Enter the account username.Password - Enter the account password.Mailbox type - Enter mailbox type: POP3 or IMAP4.Incoming server - Enter incoming email server address.Outgoing server - Enter outgoing email server address.SMTP authentication - Choose security settings for outgoing mail server.Account name - Now your account is set up, it will appear in the list of accounts in your Email folder.
35Retrieving your emailsYou can automatically or manually check your account for new emails. 1   Touch   then select   from the Communication menu. 2   Touch the account you want to use then , then select  Inbox  and touch  .3   Choose Retrieve and your GW525g will connect to your email account and retrieve your new messages.Sending an email using your new account1   Touch New Email in the email account you want to use and a new email will open.2   You can enter the recipient’s address and write your message. You can also attach images, videos, sounds or other file types.3   Touch Send and your email will be sent.Changing your email settingsYou can change your email settings based on your own preferences.1   Touch   then select   and   . 2   Tap   and select Settings to change the following settings:Email accounts - Set up the Email account.Preferred Email - Select the email account you want to use.Allow reply email - Choose to allow the sending of ‘read confirmation’ messages.Request reply email - Choose whether to request read confirmation messages.Retrieve interval - Select how often your GW525g checks for new email messages.Retrieve amount - Select the number of emails to be retrieved at any one time.
36   |  User GuideMessagingInclude message in Fwd & Reply - Select whether to include the original message in your reply.Include attachment - Select whether to include the original attachment in any reply.Auto Retrieval in Roaming  - Choose whether to retrieve messages automatically when abroad (roaming).TIP! Costs for retrieving email may be higher when roaming. Check with your network supplier.New email notification - Choose whether to be alerted to new emails.Signature - Create an email signature and switch this feature on.Priority - Select the priority level of your email messages.Mail sending size - Select the size limit of your emails.Email counter - view email information.Message foldersYou’ll recognise the folder structure used on your GW525g, and it is fairly self-explanatory.Inbox - All the messsages you receive are placed into your inbox. From here you can view, delete and more; see Managing your messages below for details.Outbox - This is a temporary storage folder while messages are being sent.Sent items - All the messages you have sent are placed in this folder.Drafts - If you do not finish writing a message, you can save what you have done in this folder.My Folders - Create folders to store your messages.Trash - All the mesages you have trashed are placed in this folder (email only)
37Managing your messagesYou can use your Inbox to manage your messages.1   Touch   then select   and . 2   Select Inbox.3   Touch   and then choose to:Delete - Delete marked messages.Change view - Select Threaded view or Standard view.Create new message - Open a new blank message or email.Move to My folders - Move the marked messages to My folders.Filter - Choose one of the filter options.Delete all - Delete all messages in Inbox.If you see the message No space for SIM messages you should delete some messages on the SIM.If you see the message No space for messages you should delete some messages to free up memory space.Using templatesCreate templates for the SMS and MMS messages you send most often. There are already some templates on the phone, which you can edit.1   Touch   then choose Templates from the Communication menu.2   Choose Text templates or Multimedia templates. You can then touch   to Add templates, Delete or Delete all templates.3   Touch Add template to create a new template.4   You can view the template by selecting it on the list and edit it by touching it on the view screen.Using emoticonsLiven up your messages using emoticons. There are some commonly used emoticons already on your phone.
38   |  User GuideMessaging1   Touch   then choose Emoticons from the Communication menu.2   Touch   to Add new, Delete or Delete all emoticons.3   Touch Add emoticon to create a new emoticon.4   You can view the emoticon by selecting it on the list and edit it by touching it on the view screen.Changing your text message settingsYour GW525g message settings are pre-defined so that you can send messages immediately. These settings can be changed based on your preferences.Touch   then choose Settings from the Communication menu. Select Text message. You can make change the following:Text message centre - Enter the details of your message centre.Delivery report - Slide the switch left to receive confirmation that your messages have been delivered.Validity period - Choose how long your messages are stored at the message centre.Message types - Convert your text into Text, Voice, Fax, X.400 or Email.Character encoding - Choose how your characters are encoded. This impacts on the size of your messages and therefore on your data charges.Send long text as - Choose to send long messages as Multiple SMS messages or as an MMS.Changing your multimedia message settingsYour GW525g message settings are pre-defined so that you can send messages immediately. These settings can be changed based on your preferences.
39Touch   , select   then   . Choose Settings and Multimedia message. You can make change the following:Retrieval mode - Choose Home network or Roaming network. If you then select Manual you will only receive notifications about MMS messages. You can then decide whether to download them in full.Delivery report - Choose whether to allow and/or request a delivery report.Read reply - Choose to allow and/or request a read report. Priority - Choose the priority level of your MMS.Validity period - Choose how long your message is stored at the message centre.Slide duration - Choose how long slides appear on screen.Creation mode - Choose your message mode.Delivery time - Choose how long to wait before a message is delivered.Multi msg centre - Enter the details of your message centre.Changing your other settingsTouch   in the Communication menu and choose Settings then:Voicemail - Touch   to add a new Voicemail service. Contact your network operator for more information about the service they provide.Service message - Choose whether to receive or block service messages. You can also set message security levels by creating trusted and not trusted sender lists.Message counter  - Choose to set or reset the message counter.Info. service - Select your reception status, language and other settings.
40   |  User GuideMessagingWindows Live MessagerNOTE: This service is not available in all countries. Please contact your service provider for further information.You can have a chat with other peoples using this menu. Windows Live Messager can only be used with a supporting of SIM and country.
41Taking a quick photo 1   Press and hold down the   key on the right side of the phone.2   The viewfinder will appear on screen.3   Holding the phone horizontally, point the lens towards the subject of the photo.4   Position the phone so you can see the subject of your photo in the preview screen.5   When the camera has focused on your subject, either press the   on the side of the phone firmly or press the red box on the lower right of the screen to take the photo. The sending options then appear on the screen.After taking a photoYour captured photo will appear on screen. The name of the image runs along the bottom of the screen along with six icons on the right-hand side.P210208_00.13.jgp  Touch to move to your gallery.  Touch to send the photo as a message, email or via Bluetooth.   Touch to edit Picture.  Touch to set the picture you have taken as Wallpaper.  Touch to delete the photo you have just taken and confirm by touching Yes. The viewfinder will reappear.  Touch to take another photo immediately. Your current photo will be saved.Camera
42   |  User GuideGetting to know the viewfinderTIP! You can bring up the options by tapping the screen. They automatically turn o after a few seconds.Settings - Touch this icon to open the settings menu.  Camera mode - Camera mode is selected.Video camera mode - Touch this icon to switch to video mode.Back - Touch here to return to the standby screen.GalleryExposure  Shot mode  Take a picture Camera
43Choosing a shot type1   Touch   to open the available shot types.2   Choose from two options:Normal shot - This is the default shot type - the photo will be taken in the normal way, as outlined in taking a quick photo.Burst shot - This enables you to take three, six or nine shots automatically in very quick succession.Adjusting the exposureExposure defines the difference between light and dark (contrast) in an image. A low contrast image will appear fuzzy, whereas a high contrast image will appear much sharper.1   Touch  .2   Slide the contrast indicator along the bar - left for a lower exposure and hazier image, or right for a higher exposure and sharper image.Using the advanced settingsFrom the viewfinder, touch   to open all advanced settings options.Preview settingsSize - Change the size of the photo to save memory space or take a picture of the correct size for a contact. Colour Effect - Choose a colour tone to use on your new photo. White balance - Choose from Auto, Incandescent, Sunny, Fluorescent or Cloudy.Night mode - Useful for use in dark places.Self-timer - The self-timer allows you to set a delay after the capture
44   |  User GuideCamera button is pressed before the camera takes the picture. Choose from Off, 3 seconds, 5 seconds or 10 seconds. This is ideal if you want to be included in a photo.Quality  - Choose between Super fine, Fine and Normal. The finer the quality, the sharper a photo will be, but the file size will increase. This means you’ll be able to store fewer photos in your memory.View Mode - Choose between Full screen or Full image. In Full screen, the image may be cropped to fit the screen.Other settingsMemory - Choose whether to save your photos to the Handset memory or to the External memory.Shutter sound - Select one of the three shutter sounds.Grid screen - Choose from Off, Simple cross or Trisection. Reset settings - Reset all the camera settings. TIP! When you exit the camera all settings will return to their defaults except image size and image quality. Any non-default settings will need to be reset, for example colour tone. Check these before you take your next photo.TIP! The settings menu is superimposed over the viewnder, so when you change elements of the image colour or quality you will see a preview of the image change behind the settings menu.Viewing your saved photosYou can access your saved photos from within camera mode. Simply touch   and your gallery will appear on screen.

Navigation menu