LG Electronics USA HSTND-3411-G LCD MONITOR User Manual EMISSION TEST REPORT
LG Electronics USA LCD MONITOR EMISSION TEST REPORT
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1487016 |
| Application ID | bC0bDTDSUT5PxQAYIfYgDQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 222.1kB (2776197 bits) |
| Date Submitted | 2011-06-21 00:00:00 |
| Date Available | 2011-08-05 00:00:00 |
| Creation Date | 2011-06-20 13:35:52 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2011-06-20 13:37:41 |
| Document Title | EMISSION TEST REPORT |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | ìµœì„ ë¯¸ |
Order Number
: GETEC-C1-11-112
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-11-045
Page 1 / 1
APPENDIX G
: USERâS MANUAL
EUT Type: LCD Monitor
FCC ID.: BEJHSTND-3411-G
HP LD4220tm and LD4720tm
Digital Signage Touch Displays
User Guide
Š 2011 Hewlett-Packard Development
Company, L.P. The information contained
herein is subject to change without notice.
The only warranties for HP products and
services are set forth in the express
warranty statements accompanying such
products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable
for technical or editorial errors or omissions
contained herein.
This document contains proprietary
information that is protected by copyright.
No part of this document may be
photocopied, reproduced, or translated to
another language without the prior written
consent of Hewlett-Packard Company.
MicrosoftÂŽ, WindowsÂŽ, and Windows
Vista⢠are either trademarks or registered
trademarks of Microsoft Corporation in the
United States and/or other countries.
First Edition (September 2011)
Document Part Number: 626998-001
About this guide
This guide provides information on setting up the display, installing drivers, using the On-Screen
Display menu, troubleshooting, and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
NOTE:
ENWW
Text set off in this manner provides important supplemental information.
iii
iv
About this guide
ENWW
Table of contents
1 Product features ............................................................................................................................................. 1
HP Digital Signage touch models ......................................................................................................... 1
Accessories .......................................................................................................................................... 2
Optional accessories ............................................................................................................................ 2
2 Safety and maintenance guidelines .............................................................................................................. 3
Important safety information ................................................................................................................. 3
Maintenance guidelines ........................................................................................................................ 4
Cleaning the display ............................................................................................................ 5
Shipping the display ............................................................................................................. 5
3 Setting up the display ..................................................................................................................................... 6
Installing the stand (sold separately) .................................................................................................... 6
Connecting the speakers (sold separately) .......................................................................................... 9
Rotating to the portrait position .......................................................................................................... 11
Using the remote control .................................................................................................................... 12
Inserting the batteries ........................................................................................................ 12
Identifying remote control buttons ...................................................................................... 13
Identifying display components .......................................................................................................... 15
Display components .......................................................................................................... 15
Display control panel ......................................................................................................... 16
Display ports ...................................................................................................................... 17
VESA mounting support and security slot .......................................................................................... 18
Connecting to external devices .......................................................................................................... 19
Connecting RGB ................................................................................................................ 21
Connecting DisplayPort (480p/576p/720p/1080i/1080p) ................................................... 22
Connecting HDMI (480p/576p/720p/1080i/1080p) ............................................................ 22
Connecting LAN ................................................................................................................. 24
Connecting the USB (Universal Serial Bus) cable ............................................................. 25
Connecting daisy chain displays ........................................................................................................ 25
ENWW
4 Operating the display ................................................................................................................................... 27
Software and utilities .......................................................................................................................... 27
The information file ............................................................................................................ 27
The image color matching file ............................................................................................ 27
Installing the .INF and .ICM files ........................................................................................................ 28
Installing from the CD ........................................................................................................ 28
Downloading from the Internet ........................................................................................... 28
Using the auto-adjustment function (RGB INPUT source only) ......................................................... 29
Using the On-Screen Display menu ................................................................................................... 30
Using the remote control to adjust the OSD ...................................................................... 30
OSD menu selections ........................................................................................................ 31
Selecting an Aspect Ratio .................................................................................................. 36
Adjusting the timer function ............................................................................................... 36
Clock ................................................................................................................. 36
On Time and Off Time ....................................................................................... 37
Sleep Timer ....................................................................................................... 37
Auto Off ............................................................................................................. 38
Power On Delay ................................................................................................ 38
Using Key Lock .................................................................................................................. 38
Using ISM Method ............................................................................................................. 39
Using Tile Mode ................................................................................................................. 39
5 Operating the touch screen ......................................................................................................................... 41
Plug and play (Microsoft Windows 7 and Windows Vista) ................................................................. 41
Touch software installation for Microsoft Windows XP ....................................................................... 41
Installing the software from the CD .................................................................................... 41
Installing the software from the Internet ............................................................................. 42
Calibrating the touch screen ............................................................................................................... 43
Calibrating the touch screen using the calibration tool for Windows XP ............................................ 43
Customizing the touch screen ............................................................................................................ 43
Using the touch keyboard and writing tab .......................................................................................... 44
Finger operation ................................................................................................................................. 44
Upgrading the firmware ...................................................................................................................... 45
6 Multi-Display touch screen setup ................................................................................................................ 46
7 Using the HP Media Sign Player .................................................................................................................. 47
Using Photo List ................................................................................................................................. 47
Using Music List ................................................................................................................................. 48
Using Movie List ................................................................................................................................. 49
vi
ENWW
Appendix A Troubleshooting .......................................................................................................................... 51
Solving common problems ................................................................................................................. 51
Using the Internet ............................................................................................................................... 53
Preparing to call technical support ..................................................................................................... 53
Appendix B Technical specifications ............................................................................................................ 54
HP Digital Signage Display ................................................................................................................ 54
HP LD4220tm dimensions (with optional stand and speakers) .......................................................... 56
HP LD4720tm dimensions (with optional stand and speakers) .......................................................... 57
Recognizing preset display resolutions .............................................................................................. 58
Preset display modes ........................................................................................................ 58
DTV mode .......................................................................................................................... 58
Power indicator .................................................................................................................. 59
Appendix C Command reference ................................................................................................................... 60
Connecting the cable .......................................................................................................................... 60
RS-232-C configurations ................................................................................................... 60
Communication parameter ................................................................................................ 61
Command reference list ..................................................................................................................... 61
Transmission/Receiving Protocol ....................................................................................................... 63
01. Power (Command: a) ................................................................................................... 64
02. Input Select (Command: b) (Main Picture Input) ......................................................... 65
03. Aspect Ratio (Command: c) (Main picture format) ...................................................... 66
04. Screen Mute (Command: d) ........................................................................................ 66
05. Volume Mute (Command: e) ........................................................................................ 67
06. Volume Control (Command: f) ..................................................................................... 67
07. Contrast (Command: g) ............................................................................................... 68
08. Brightness (Command: h) ............................................................................................ 69
09. Color (Command: i) (Video Timing only) ..................................................................... 69
10. Tint (Command: j) (Video Timing only) ........................................................................ 70
11. Sharpness (Command: k) (Video Timing only) ............................................................ 71
12. OSD Select (Command: l) ........................................................................................... 72
13. Remote Lock/Key Lock (Command: m) ....................................................................... 72
14. Balance (Command: t) ................................................................................................. 73
15. Color Temperature (Command: u) ............................................................................... 73
16. Abnormal state (Command: z) ..................................................................................... 74
17. ISM Method (Command: j p) ........................................................................................ 74
18. Auto Configure (Command: j u) ................................................................................... 75
19. Key (Command: m c) ................................................................................................... 75
20. Tile Mode (Command: d d) .......................................................................................... 76
ENWW
vii
21. Tile H Position (Command: d e) ................................................................................... 76
22. Tile V Position (Command: d f) .................................................................................... 77
23. Tile H Size (Command: d g) ........................................................................................ 77
24. Tile V Size (Command: d h) ......................................................................................... 78
25. Tile ID Set (Command: d i) .......................................................................................... 78
26. Natural Mode (In Tile Mode) (Command: d j) .............................................................. 79
27. Picture Mode (Command: d x) ..................................................................................... 79
28. Sound Mode (Command: d y ) ..................................................................................... 80
29. Fan Fault check (Command: d w ) ............................................................................... 80
30. Elapsed time return (Command: d l) ............................................................................ 81
31. Temperature value (Command: d n) ............................................................................ 81
32. Lamp fault Check (Command: d p) .............................................................................. 82
33. Auto volume (Command: d u) ...................................................................................... 82
34. Speaker (Command: d v) ............................................................................................. 83
35. Time (Command: f a) ................................................................................................... 83
36. On Timer (On/Off Timer) Time (Command: f d) ........................................................... 84
37. Off Timer (On/Off Timer) Time (Command: f e) ........................................................... 85
38. Scheduling Input select (Command: f u) (Main Picture Input) ..................................... 86
39. Sleep Time (Command: f f) .......................................................................................... 87
40. Auto Off (Command: f g) .............................................................................................. 87
41. Power On Delay (Command: f h) ................................................................................. 88
42. Language (Command: f i) ............................................................................................ 88
43. DPM Select (Command: f j) ......................................................................................... 89
44. Reset (Command: f k) .................................................................................................. 89
45. Energy saving (Command: f I) ..................................................................................... 90
46. Power Indicator (Command: f o) .................................................................................. 90
47. Serial no. Check (Command: f y) ................................................................................. 91
48. S/W Version (Command: f z) ....................................................................................... 91
49. Input Select (Command: x b) ....................................................................................... 91
IR codes ............................................................................................................................................. 92
Remote Control IR Code ................................................................................................... 92
Output waveform ............................................................................................... 92
Configuration of frame ....................................................................................... 92
Lead code ......................................................................................................... 93
Repeat code ...................................................................................................... 93
Bit description .................................................................................................... 93
Frame interval: Tf .............................................................................................. 93
IR Codes Table .................................................................................................................. 93
Appendix D Agency regulatory notices ......................................................................................................... 96
Federal Communications Commission notice .................................................................................... 96
viii
ENWW
Modifications ...................................................................................................................... 96
Cables ................................................................................................................................ 96
Declaration of Conformity for products marked with the FCC logo (United States only) .................... 96
Canadian notice ................................................................................................................................. 97
Avis Canadien .................................................................................................................................... 97
European Union regulatory notice ...................................................................................................... 97
German ergonomics notice ................................................................................................................ 98
Japanese notice ................................................................................................................................. 98
Korean notice ..................................................................................................................................... 98
Power cord set requirements ............................................................................................................. 98
Japanese power cord requirements .................................................................................. 99
Product environmental notices ........................................................................................................... 99
Materials disposal .............................................................................................................. 99
Disposal of waste equipment by users in private households in the European Union ...... 99
Chemical substances ......................................................................................................... 99
HP recycling program ...................................................................................................... 100
Restriction of Hazardous Substances (RoHS) ................................................................. 100
Turkey EEE regulation ..................................................................................................... 101
Ukraine Restriction of Hazardous Substances ................................................................ 101
ENWW
ix
x
ENWW
1
Product features
HP Digital Signage touch models
The HP LCD digital signage displays have a wide-aspect active matrix thin-film transistor (TFT) panel.
The displays features include the following:
ENWW
Ĺ
HP LD4220tm model, 106.7 cm (42-inch diagonal) widescreen viewable area display with
1920 x 1080 native resolution
Ĺ
HP LD4720tm model, 119.28 cm (47-inch diagonal) widescreen viewable area display with
1920 x 1080 native resolution
Ĺ
Landscape and portrait wall mounting positions
Ĺ
Video inputs support DisplayPort In/Out, HDMI In, RGB In/Out, and RS-232-C In/Out signal
inputs
Ĺ
Audio input jack and external speaker ports
Ĺ
LAN port for remote display control and controlling the HP Media Sign Player
Ĺ
HP Media Sign PlayerâPlay image, video, and music files from a USB storage device; define
play list, timing options, and scheduling
Ĺ
USB port for the HP Media Sign Player
Ĺ
On-Screen Display (OSD) menu in several languages for ease of setup and screen optimization
Ĺ
Screen adjustment buttons (Power On/Off, AUTO/SET, OSD Controls, MENU, and INPUT) on
the back of the display
Ĺ
User controls to adjust Picture, Tile Mode, Timer, Energy Saving, Aspect Ratio, Audio, and
additional setup options
Ĺ
Plug and play capability if supported by the system
Ĺ
Security cable provision on rear panel to lock down the display and help prevent theft
Ĺ
Support VESA compliant mounting interface with 600 x 400 mm (23.62 x 15.75 in) hole pattern
for the HP LD4220tm model and 800 x 400 mm (31.50 x 15.75 in) hole pattern for the
HP LD4720tm model
HP Digital Signage touch models
Accessories
Ĺ
Software and documentation CD
Ĺ
Remote control
Ĺ
Power cord
Ĺ
DisplayPort cable
Ĺ
HDMI cable
Ĺ
RGB (VGA) cable
Optional accessories
Optional accessories (purchased separately) might vary depending on the model.
Ĺ
Stand kit
Ĺ
Speakers kit
Ĺ
Wall mount kit
Chapter 1 Product features
ENWW
2
Safety and maintenance guidelines
Important safety information
A power cord is included with the display. If another cord is used, use only a power source and
connection appropriate for this display. For information on the correct power cord set to use with the
display, refer to the Power cord set requirements on page 98.
WARNING! To reduce the risk of electric shock or damage to the equipment:
⢠Do not disable the power cord grounding feature. The grounding plug is an important safety feature.
⢠Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
⢠Disconnect power from the product by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one can
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper
workstation, setup, posture, and health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located on the Web at www.hp.com/ergo
and/or on the documentation CD, if one is included with the display.
CAUTION: For the protection of the display, as well as the media player/computer, connect all
power cords for the media player/computer and its peripheral devices (such as a display, printer,
scanner) to some form of surge protection device such as a power strip or Uninterruptible Power
Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically
labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement
Policy so you can replace the equipment, if surge protection fails.
Use the appropriate and correctly sized furniture designed to properly support your display.
WARNING! Displays that are inappropriately situated on dressers, bookcases, shelves, desks,
speakers, chests, or carts can fall over and cause personal injury.
Care should be taken to route all cords and cables connected to the display so that they cannot be
pulled, grabbed, or tripped over.
CAUTION: Do not place the device in a location where water may drip and/or splash on the device.
Do not place an object that contains water, such as a flower vase, on the device.
ENWW
Important safety information
Maintenance guidelines
To enhance the performance and extend the life of the display:
Ĺ
Do not open the display cabinet or attempt to service this product yourself. Adjust only those
controls that are covered in the operating instructions. If the display is not operating properly or
has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
Ĺ
Use only a power source and connection appropriate for this display, as indicated on the label/
back plate of the display.
Ĺ
Be sure the total ampere rating of the products connected to the outlet does not exceed the
current rating of the electrical outlet, and the total ampere rating of the products connected to the
cord does not exceed the rating of the cord. Look on the power label to determine the ampere
rating (AMPS or A) for each device.
Ĺ
Install the display near an outlet that you can easily reach. Disconnect the display by grasping
the plug firmly and pulling it from the outlet. Never disconnect the display by pulling the cord.
Ĺ
Turn the display off when not in use. You can substantially increase the life expectancy of the
display by using a screen saver program and turning off the display when not in use.
CAUTION: Burn-in or image sticking might occur on displays which display the same static
image on the screen for prolonged periods of time. To avoid burn-in or image sticking and to
prolong the life of the display, you should activate one of the four ISM selections in the OSD,
activate a screen-saver application, periodically cycle between static information and moving
images, or turn off the display when it is not in use for prolonged periods of time.
Ĺ
Slots and openings in the cabinet are provided for ventilation. These openings must not be
blocked or covered. Never push objects of any kind into cabinet slots or other openings.
Ĺ
Do not drop the display or place it on an unstable surface.
Ĺ
Do not allow anything to rest on the power cord. Do not walk on the cord.
Ĺ
Keep the display in a well-ventilated area, away from excessive light, heat or moisture.
Ĺ
When removing the display base, you must lay the display face down on a soft area to prevent it
from getting scratched, defaced, or broken.
Chapter 2 Safety and maintenance guidelines
ENWW
Cleaning the display
1.
Turn off the display and unplug the power cord from the back of the unit.
2.
Dust the display by wiping the screen and the cabinet with a soft, clean antistatic cloth.
3.
For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.
CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen
surface. Never spray the cleaner directly on the screen surface. It might seep behind the bezel and
damage the electronics.
CAUTION: To clean the display screen or cabinet, do not use cleaners that contain any petroleumbased materials such as benzene or thinner or any volatile substance. These chemicals might
damage the display.
Shipping the display
Keep the original packing box in a storage area. You might need it later if you move or ship the
display.
ENWW
Maintenance guidelines
3
Setting up the display
To set up the display, ensure that the power is turned off to the display, media player/computer
system, and other attached devices, and then follow the instructions below.
Installing the stand (sold separately)
1.
Take the parts for the stand out of the box.
Ĺ
HP LD4220tmâFour screws M4 x 32 mm (1.26 in) and stand
Figure 3-1 HP LD4220tmâStand accessory contents
Ĺ
HP LD4720tmâFour screws M4 x 10 mm (0.39 in) and stand
Figure 3-2 HP LD4720tmâStand accessory contents
Chapter 3 Setting up the display
ENWW
2.
Place a soft cloth on the table and place the display with the screen facing downward. Connect
the stand as shown in the following figure.
Figure 3-3 HP LD4220tmâSliding the stand onto the display
Figure 3-4 HP LD4720tmâSliding the stand onto the display
ENWW
Installing the stand (sold separately)
3.
Use the screws to secure the stand on the rear side of the product as shown in the figure.
Figure 3-5 HP LD4220tmâSecuring the stand to the display
Figure 3-6 HP LD4720tmâSecuring the stand to the display
Chapter 3 Setting up the display
ENWW
Connecting the speakers (sold separately)
1.
Mount the speakers onto the display.
Figure 3-7 Mounting the speakers
2.
Use the four Taptite D3 x 12 mm (0.47 in) screws to secure the speakers to the display.
Figure 3-8 Securing the speakers to the display
ENWW
Connecting the speakers (sold separately)
3.
After installing the speakers, use the cable holders and cable ties (available on select models) to
secure the speaker cables.
Figure 3-9 Using the cable holders (feature available on select models)
Figure 3-10 Using the cable ties (feature available on select models)
10
Chapter 3 Setting up the display
ENWW
4.
After installing the speakers, connect to the SPEAKER input terminal by connecting the proper
color match for the left and right speakers.
Figure 3-11 Connecting to the input terminal
Rotating to the portrait position
When installing the display in the portrait position, rotate it clockwise based on its front. The display
can be rotated in only one direction.
NOTE:
The display cannot be rotated if it is installed on the stand.
Figure 3-12 Installing portrait
NOTE: The LED indicator light orientation is on the bottom-right corner in the landscape position
and on the bottom-left corner when rotated to the portrait position.
ENWW
Rotating to the portrait position
11
Using the remote control
Inserting the batteries
1.
Slide off the battery cover.
2.
Insert the batteries with correct polarity (+/-).
3.
Close the battery cover.
NOTE: To prevent environmental pollution, dispose of used batteries in accordance with your local
recycling guidelines.
Figure 3-13 Inserting batteries
12
Chapter 3 Setting up the display
ENWW
Identifying remote control buttons
Figure 3-14 Remote control buttons
14
INPUT
ENERGY
MONITOR
15
OFF
ON
SAVING
16
17
MARK
ARC
PSM
BRIGHT A
NESS G
18
MUTE
MENU
10
AUTO
USB
19
20
OK
11
BACK
TILE
EXIT
ID
12
ON
OFF
21
22
13
Component
Function
Power on/off
Turns the display on from standby or off to standby
MONITOR ON or
OFF
Turns the display on and off
Number
Types numbers
ENWW
Not supported
Volume up (+) or
down (-)
Adjusts the volume
PSM
Selects the Picture Status Mode
MUTE
Turns the sound on or off
MENU
Selects a menu or clears all on-screen displays and returns to display viewing from any menu
Up/down/left/right
arrows
Allows navigation of the On-Screen Display menus and adjustment of the system settings
10
OK
Accepts a selection or displays the current mode
11
BACK
Navigates one step back in an interactive application
Using the remote control
13
Component
Function
12
ID ON or OFF
Enables the display lock
13
USB menu control
buttons
Use with the HP Media Sign Player option lists in the USB menu
14
ENERGY SAVING
Adjusts the Energy Saving mode
15
INPUT
Opens the Input Source menu options (RGB, HDMI/DVI, and DisplayPort)
16
Not supported
17
ARC
Selects the Aspect Ratio converter mode
18
BRIGHTNESS
Adjusts the resolution and brightness by pressing the Up and Down buttons on the remote
control
In USB mode, the OSD menu uses the Page function of the BRIGHTNESS button to move to
the next file list.
14
19
AUTO
Automatically adjusts picture position and minimizes image instability (RGB input only)
20
USB
Selects USB menu to control HP Media Sign Player
21
EXIT
Clears all on-screen displays and returns to display viewing from any menu
22
TILE
Selects the TILE Mode
Chapter 3 Setting up the display
ENWW
Identifying display components
The components of the display and their functions are identified in the following sections.
Display components
Figure 3-15 HP LD4220tmâDisplay components
Figure 3-16 HP LD4720tmâDisplay components
ENWW
Component
Function
IR receiver
Receives signals from the remote control
LED indicator light
Light is blue when display is on, amber when display is in power saving mode
Display control buttons
Power and OSD control buttons
Power cord receptacle
Power cord receptacle to connect the display to an electrical outlet
Display signal ports
RGB IN/OUT, HDMI/DVI, RS-232-C IN/OUT, Audio IN, DisplayPort IN/OUT, USB,
LAN
External speaker connections
Connections for external speakers
Identifying display components
15
Display control panel
Figure 3-17 HP LD4220tmâDisplay control panel
1 2 3 4 5 6 7 8
Figure 3-18 HP LD4720tmâDisplay control panel
1 2 3 4 5 6 7 8
Component
Function
Power ON/OFF
Press to turn the power ON. Press again to turn it OFF.
AUTO/SET
When the OSD window is closed, the auto-adjustment feature to optimize the
screen image is activated.
When the OSD window is open, press to select a menu item or save changes.
OSD select/adjust button
Selects an OSD menu icon or adjusts the settings in the OSD screen.
UP
UP arrow adjusts up
OSD select/adjust button
Selects an OSD menu icon or adjusts the settings in the OSD screen.
DOWN
DOWN arrow adjusts down
OSD select/adjust button
Selects an OSD menu icon or adjusts the settings in the OSD screen.
LEFT
LEFT arrow adjusts left
OSD select/adjust button
Selects an OSD menu icon or adjusts the settings in the OSD screen.
RIGHT
RIGHT arrow adjusts right
MENU
Opens or closes the OSD (On-Screen Display) menu screen.
INPUT
Toggles between video inputs:
16
Chapter 3 Setting up the display
Ĺ
DisplayPortâDigital signal
Ĺ
HDMI/DVIâDigital signal
Ĺ
RGBâ15-pin D-Sub analog signal (VGA)
ENWW
Display ports
Figure 3-19 Display ports
Component
Function
Power cord receptacle
Power cord receptacle to connect the display to an electrical outlet.
RS-232-C (Control) serial
ports
RS-232-C (Control) serial ports connect to RS-232 devices.
HDMI/DVI, RGB IN, and RGB
OUT
HDMI supports High Definition (HD) input and HDCP (High-bandwidth Digital
Content Protection). Some devices require HDCP in order to display HD signals.
DVI input is supported with an HDMI to DVI signal cable (not included). RGB IN
supports analog VGA connections from PCs. RGB OUT supports cloning
connections with VGA cables from display to display.
AUDIO (RGB/DVI)
AUDIO (RGB/DVI) connects the audio cable to the Line Out on the media player/
computer sound card.
NOTE: Before connecting to the AUDIO (RGB/DVI) port on the display, verify
what type of Audio Out connection is available on the media player/computer
sound card. The Line Out on a media player/computer is used to connect to
speakers, including a built-in amplifier (AMP). For additional instructions, refer to
the sound card manual.
If the Audio Out on the media player/computer sound card has only Speaker Out,
reduce the media player/computer volume before connecting to the AUDIO (RGB/
DVI) port on the display.
If the Audio Out on the media player/computer sound card supports both Speaker
Out and Line Out, choose Line Out.
ENWW
DP IN and DP OUT
(DisplayPort)
DP IN supports digital input with DisplayPort cables from a media player/
computer. DP OUT supports cloning of connections with DisplayPort cables from
display to display.
USB
USB connects a USB storage device to the HP Media Sign Player.
LAN
LAN connects the display directly to a media player/computer or to a network
directly or indirectly by a router, hub, or switch using the LAN cable.
SPEAKER
SPEAKER connects the external speakers to the display.
TOUCH
Connects the display and the PC with USB cable.
Identifying display components
17
VESA mounting support and security slot
VESA FDMI (Video Electronics Standards Association Flat Display Mounting Interface) wall
mountingâThis product supports a VESA FDMI-compliant mounting device. The mounting devices
can be purchased separately from HP.
Security cable provisionâTo help prevent theft, a security cable provision is available on the rear of
the display. The cable and lock required to connect to the display are available separately and can be
purchased from HP.
Figure 3-20 VESA mounting holes
18
Chapter 3 Setting up the display
ENWW
Connecting to external devices
1.
Be sure that the display, media player/computer, and all attached devices are turned off.
2.
Connect the signal input cable.
For additional information, refer to one of the following signal input cable sections:
3.
Ĺ
Connecting RGB on page 21
Ĺ
Connecting DisplayPort (480p/576p/720p/1080i/1080p) on page 22
Ĺ
Connecting HDMI (480p/576p/720p/1080i/1080p) on page 22
Ĺ
Connecting LAN on page 24
Connect the audio cable (sold separately) to the Audio (RGB/DVI) (1) connector on the rear of
the display and the other end to the Line Out port (2) on the media player/computer if the video
signal connection is from either a RGB (VGA) or DVI connector on the media player/computer.
Figure 3-21 Connecting the audio cable
NOTE: The ferrite core can be used to reduce electromagnetic waves when connecting an
audio cable. Fit the ferrite core to the audio cable. The ferrite core needs to be separated from
the mold by 5 cm (2 in).
ENWW
Connecting to external devices
19
4.
Connect the AC power cord to the AC-IN connector on the rear of the display and the other end
to an electrical outlet. Before connecting the power cord, please read the power-cord safety
precautions in the Important safety information on page 3.
Figure 3-22 HP LD4220tmâConnecting the power cord
Figure 3-23 HP LD4720tmâConnecting the power cord
5.
Turn on power to the display by pressing the power button (1).
Figure 3-24 HP LD4220tmâPower button
Figure 3-25 HP LD4720tmâPower button
20
Chapter 3 Setting up the display
ENWW
6.
Turn on the media player/computer.
7.
Select an input signal:
Press the INPUT button on the remote control to open the Input List, select the appropriate
input signal, and then press the OK button to save your change.
Or, press the INPUT button on the back of the display, select the appropriate input signal, and
then press the AUTO/SET button to save your change.
Ĺ
When connecting with a D-Sub (VGA) signal input cable, select RGB from the Input List.
Ĺ
When connecting with an HDMI signal input cable or when connecting a DVI signal input
cable with the HDMI to DVI cable, select HDMI/DVI from the Input List.
Ĺ
When connecting with a DisplayPort signal input cable, select DP from the Input List.
NOTE: If connecting more than one input source, connect the signal cables [HDMI/DVI, RGB
(VGA), and DisplayPort] to each media player/computer. Press the INPUT button on the remote
control to select the input to view.
Connecting RGB
1.
For analog operation, connect the D-Sub signal cable to the RGB IN (1) connector on the rear of
the display and the other end to the connector (2) on the media player/computer.
NOTE: If connecting to a Mac media player/computer, use the standard Mac adapter (3)ânot
included.
Figure 3-26 Connecting the D-Sub signal cable
2.
Connect the audio cable (sold separately) to the Audio (RGB/DVI) (1) connector on the rear of
the display and the other end to the Line Out port (2) on the media player/computer if the video
signal connection is from either a RGB (VGA) or DVI connector on the media player/computer.
Figure 3-27 Connecting the audio cable
3.
Select an input signal:
Press the INPUT button on the remote control, select the RGB input signal, and then press the
OK button to save.
ENWW
Connecting to external devices
21
Or, press the INPUT button on the back of the display, select the RGB input signal, and then
press the AUTO/SET button to save.
Connecting DisplayPort (480p/576p/720p/1080i/1080p)
1.
Connect the DisplayPort cable to the DP IN port on the display and to the DisplayPort OUT port
on the media player/computer, and then connect the display power cord.
Figure 3-28 Connecting DisplayPort input to a media player/computer
2.
Select an input signal.
Press the INPUT button on the remote control, select the DP input signal, and then press the OK
button to save.
Or, press the INPUT button on the back of the display, select the DP input signal from the Input
List, and then press the AUTO/SET button to save.
Connecting HDMI (480p/576p/720p/1080i/1080p)
HDMI supports High Definition Input and HDCP. Some devices require HDCP in order to display HD
signals.
1.
Use one of the following examples to connect the HDMI input:
Ĺ
Connect an HDMI signal cable to the HDMI/DVI port on the display and to the HDMI port on
the media player/computer, and then connect the display power cord.
Figure 3-29 Connecting the HDMI to HDMI signal cable
22
Chapter 3 Setting up the display
ENWW
Ĺ
Connect an HDMI to DVI signal cable to the HDMI/DVI port on the display, and then to the
DVI port on the media player/computer.
For AUDIO input from the media player/computer (this is only needed with DVI input signal
connections), connect the RCA-PC audio cable (cable not included) to the display and to
the Audio OUT ports on the media player/computer, then connect the display power cord.
NOTE: Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite
cores to maintain standard compliance for this product.
Figure 3-30 Connecting the HDMI to DVI signal cable
2.
Select an input signal.
Press the INPUT button on the remote control, select the HDMI/DVI input signal, and then press
the OK button to save.
Or, press the INPUT button on the back of the display, select the HDMI/DVI input signal, and
then press the AUTO/SET button to save.
ENWW
Connecting to external devices
23
Connecting LAN
The LAN input on the display can connect to a media player/computer, a router (switch), or an
Intranet. A LAN connection with the display establishes communication between your media player/
computer and the display. This enables the use of the HP Network Sign Manager program, running
on the connected media player/computer, to assign an IP address to the display, to change display
settings, and to set up HP Media Sign Player options, play lists, and On/Off schedule times.
1.
Connect the LAN cable (not included) using one of the following connections:
Ĺ
Computer Direct ConnectionâConnect the LAN cable to the LAN port on the display and to
the LAN port on the media player/computer (1).
Ĺ
RouterâConnect the LAN cable to the LAN port on the display and to a LAN port on the
router (2).
Ĺ
IntranetâConnect the LAN cable to the LAN port on the display and to the Intranet network
via an access point (3).
Figure 3-31 Connecting the LAN cable
2.
24
Install the HP Network Sign Manager on the media player/computer attached to the Intranet. To
download the HP Network Sign Manager, refer to the website www.hp.com. For details on using
the HP Network Sign Manager application, refer to the HP Network Sign Manager User Guide
(available only in English) included on the CD provided with the display.
Chapter 3 Setting up the display
ENWW
Connecting the USB (Universal Serial Bus) cable
Use the touch screen functionality by connecting the display and the media player/computer with a
USB cable. Power on the media player/computer before connecting the USB cable.
NOTE:
The displayâs USB terminal supports USB 2.0 and full speed (12Mbps).
NOTE: When you connect the USB cable between the display and a media player/computer with
Microsoft Windows 7 or Windows Vista operating systems, the Windows touch driver software will
automatically install. Refer to Operating the touch screen on page 41 for more information.
Windows XP requires a driver.
Connecting daisy chain displays
Multiple displays (up to 25) can be connected in a daisy chain (connect several displays together in
Tile Mode) to a computer using DisplayPort IN/OUT or with the combination of RGB IN/OUT and
RS-232-C IN/OUT ports on the display.
To connect displays in a daisy chain, the displays must all be connected with the same input/output
source (DisplayPort IN/OUT, RS-232-C IN/OUT, or RGB IN/OUT) as shown in the figures below.
Ĺ
To daisy chain displays for video, use DisplayPort IN/OUT connections or RGB IN/OUT
connections.
Ĺ
To daisy chain for both video and display command and control, use DisplayPort IN/OUT plus
RS-232-C IN/OUT or RGB IN/OUT plus RS-232-C IN/OUT.
NOTE: The number of displays that can be connected by daisy chain to one media player/computer
might vary depending on the signal status and cable loss. If the signal status is good, and there is no
cable loss, it is possible to connect up to twenty-five displays in a daisy chain from one media player/
computer.
If you are going to play video that is copy protected with High-bandwidth Digital Content Protection
(HDCP), a maximum of six displays can be daisy chained.
To connect multiple displays in a daisy chain, connect the input signal cable from the media player/
computer to the first display in the daisy chain. Connect the subsequent displays, using the same
input signal cables, from the OUT port to the IN port of the next display, as shown in the figures
below, until all the displays are connected together.
Figure 3-32 Daisy chain connectionâDisplayPort for video input signal
Display In
Display In
D i sp l ay In
D i sp l ay In
Display Out
Display Out
Display Out
Display Out
ENWW
Connecting daisy chain displays
25
Figure 3-33 Daisy chain connectionâRGB for video input signal
Figure 3-34 Daisy chain connectionâRS-232-C
RS-232C
RS-232C
RS-232C
RS-232C
(CONTROL)
(CONTROL)
(CONTROL)
(CONTROL)
OUT
OUT
OUT
OUT
IN
IN
IN
IN
26
Chapter 3 Setting up the display
ENWW
4
Operating the display
Software and utilities
HP displays are Plug-and-Play with WindowsÂŽ XP, Windows Vistaâ˘, and Windows 7 operating
systems, so you do not need to download the .INF file or the .ICM file for these operating systems.
The most current versions of the following software and utilities can be downloaded from the following
HP website for use with the displays as needed: www.hp.com.
Ĺ
Auto-adjustment Pattern UtilityâOptimizes the display.
Ĺ
HP Network Sign ManagerâAllows you to select and control the display options remotely from a
connected media player/computer and allows you to select the options for the HP Media Sign
Player. For more details on the HP Media Sign Player, refer to Using the HP Media Sign Player
on page 47. To install and configure the HP Network Sign Manager software, refer to the
HP Network Sign Manager User Guide (available only in English) included on the CD provided
with the display.
Ĺ
Windows XP touch drivers (refer to Operating the touch screen on page 41 for installation
instructions)
NOTE: If the display does not include a CD, the .INF and .ICM files and touch drivers can be
downloaded from the HP displays support website. Refer to Downloading from the Internet
on page 28.
The information file
The setup information, or .INF file, defines display resources used by MicrosoftÂŽ Windows operating
systems to ensure display compatibility with the media player/computerâs graphics adapter.
The image color matching file
The image color matching, or .ICM file, is a color data file that is used in conjunction with graphics
applications to provide consistent color matching from display screen to printer, or from scanner to
the display screen. The .ICM file is only activated from within the graphics applications that support
this feature.
ENWW
Software and utilities
27
Installing the .INF and .ICM files
You can install the .INF and .ICM files from the CD or download them from the HP displays support
website.
Installing from the CD
To install the .INF and .ICM files on the media player/computer from the CD:
1.
Insert the CD in the media player/computer CD-ROM drive. The CD menu appears.
2.
View the Display Driver Readme file.
3.
Select Install display driver software.
4.
Follow the on-screen instructions.
5.
Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
NOTE: You might need to install the digitally signed display .INF and .ICM files manually from the
CD in the event of an installation error. Refer to the Display Driver Readme file on the CD for
instructions (in English only).
Downloading from the Internet
To download the latest version of .INF and .ICM files and touch drivers from the HP displays support
website:
28
1.
Refer to www.hp.com/support and select the country/region.
2.
Follow the links for the display to the support page and download page.
3.
Ensure the system meets the requirements.
4.
Download the software by following the instructions.
Chapter 4 Operating the display
ENWW
Using the auto-adjustment function (RGB INPUT source
only)
You can optimize the screen performance by using the AUTO/SET button on the display (AUTO
button on the remote control) and the Auto-adjustment Pattern Utility software on the CD provided.
NOTE: Do not use this procedure if the display is set to use a DisplayPort or HDMI/DVI input
source.
If the display is using a PC analog signal input, this procedure can correct the following image quality
conditions:
Ĺ
Fuzzy or unclear focus
Ĺ
Ghosting, streaking or shadowing effects
Ĺ
Faint vertical bars
Ĺ
Thin, horizontal scrolling lines
Ĺ
An off-center picture
To use the auto-adjustment feature:
1.
Allow the display to warm up for 20 minutes before adjusting.
2.
Press the AUTO/SET button.
If the result is not satisfactory, continue with the procedure.
ENWW
3.
Insert the CD in the disc drive. The CD menu appears.
4.
Select Open auto-adjustment software. The setup test pattern appears.
5.
Press the AUTO/SET button to produce a stable, centered image.
6.
Press the ESC key or any other key on the keyboard to exit the test pattern.
Using the auto-adjustment function (RGB INPUT source only)
29
Using the On-Screen Display menu
The display settings can be adjusted from the On-Screen Display (OSD) menu.
Icon
Main menu
Function description
Picture
Set or change Video characteristics such as aspect ratio, brightness, contrast,
energy savings, picture mode, and screen options
Audio
Set or change the audio options
Time
Set or change the timer options
Option
Set or change display options such as OSD language, network setup, led lights
on/off, control button lock, power management, DDC-CI, and ISM Method
Tile
Set or change the tile options
USB
Set or change the USB options
Using the remote control to adjust the OSD
Use the OSD to adjust the screen image based on your viewing preferences. To access the OSD, do
the following:
30
1.
If the display is not already on, press the power button to turn on the display.
2.
Press the MENU button (1) on the remote control.
3.
To access a control, use the down arrow or up arrow button (2).
4.
When the icon you want becomes highlighted, press the OK button (3).
5.
To access a control, use the down arrow or up arrow button (4).
6.
When the list you want becomes highlighted, press the OK button (5).
7.
Use the down arrow , up arrow , left arrow , or right arrow button (6) to set or change
the selected item to the desired setting.
8.
Accept the changes by pressing the OK button (7).
9.
Exit the OSD menu by pressing the EXIT button (8).
Chapter 4 Operating the display
ENWW
OSD menu selections
The following table lists the On-Screen Display (OSD) menu selections and their functional
descriptions.
Icon
Main menu
Submenu
Description
PICTURE
Aspect Ratio
Selects from the following screen image sizes:
Energy Saving
Picture Mode
ENWW
Ĺ
16:9âWidescreen mode.
Ĺ
1:1âPicture format is 1:1 aspect ratio.
Ĺ
Just ScanâAllows you to enjoy the transmitted data fully
without any images cut off. (This menu is activated only
in 720P, 1080P, 1080i (HDMI/DVI-DTV, DisplayPortDTV).)
Ĺ
OriginalâPicture format is automatically set to 16:9 or
4:3 aspect ratio according to input signal.
Ĺ
4:3âPicture format is 4:3 aspect ratio.
Ĺ
14:9âPrograms are viewed normally in 14:9 with black
bars added to the top and bottom. The 4:3 programs are
magnified on the top/bottom and left/right sides.
Ĺ
Zoomâ4:3 programs are magnified until they fill the 16:9
screen. The top and bottom will be cut off.
Ĺ
Cinema Zoom 1âPicture format is 2.35:1 aspect ratio,
extending the picture horizontally with black bars added
to the top and bottom.
Select from the following screen brightness levels:
Ĺ
Offâ100% light
Ĺ
Level 1â80% light
Ĺ
Level 2â60% light
Ĺ
Level 3â40% light
Select from the following screen presets:
Ĺ
VividâSelect to display with brightest image.
Ĺ
StandardâThe most general and natural screen display
status.
Ĺ
CinemaâLowers brightness by one level.
Ĺ
SportâDisplays with a soft image.
Ĺ
GameâTo enjoy dynamic image when playing a game.
Ĺ
Expert 1 and Expert 2âAllows user-defined settings:
Ĺ
BacklightâControls the brightness of the screen,
adjust the brightness of the LCD panel.
Ĺ
ContrastâAdjusts the difference between the light
and dark levels.
Ĺ
BrightnessâAdjusts the brightness of the screen.
Using the On-Screen Display menu
31
Icon
Main menu
Submenu
Description
Ĺ
SharpnessâAdjusts the clearness of the image.
Ĺ
ColorâAdjusts the color to desired level.
Ĺ
TintâAdjusts the tint to a desired level.
NOTE: If the Picture Mode setting is set to Vivid, Standard,
Cinema, Sport, or Game, the above adjustments will be
automatically set to predefined settings.
Advanced
Control
Select from the following screen color adjustment settings:
Ĺ
Chapter 4 Operating the display
Ĺ
CoolâSlightly purplish white.
Ĺ
MediumâSlightly bluish white.
Ĺ
WarmâSlightly reddish white.
Ĺ
Dynamic ContrastâOptimizes the contrast
automatically according to the brightness of the
reflection.
Ĺ
Dynamic ColorâAdjusts the color of the reflection
automatically to reproduce natural colors as close as
possible.
Ĺ
Noise ReductionâRemoves the noise up to the point
where it does not damage the original picture.
Ĺ
GammaâSet your own gamma value. On the display,
high gamma values display whitish images and low
gamma values display high contrast images.
Ĺ
Black LevelâAdjusts the contrast and the brightness of
the screen using the black level of the screen for HDMI/
DVI and DP input source only.
Ĺ
32
Color TemperatureâSelect from the following color
settings:
Ĺ
LowâThe reflection of the screen gets darker.
Ĺ
HighâThe reflection of the screen gets brighter.
Film ModeâAdjusts the display, when watching a
movie, to the best picture appearance.
ENWW
Icon
Main menu
AUDIO
Submenu
Description
Expert 1 and
Expert 2 Control
Select from the following settings:
Ĺ
Dynamic ContrastâOptimizes the contrast
automatically according to the brightness of the
reflection.
Ĺ
Noise ReductionâRemoves the noise up to the point
where it does not damage the original picture.
Ĺ
GammaâSet your own gamma value. On the display,
high gamma values display whitish images and low
gamma values display high contrast images.
Ĺ
Black LevelâAdjusts the contrast and the brightness of
the screen using the black level of the screen.
Ĺ
Film ModeâAdjusts the display, when watching a
movie, to the best picture appearance.
Ĺ
Color StandardâAdjusts color.
Ĺ
White BalanceâAdjusts the overall color of the screen
to the feeling you want.
Ĺ
Color Management SystemâAdjusts by using test
patterns. This does not affect other colors but can be
used to selectively adjust the 6 color areas (Red/ Green/
Blue/Cyan/Magenta/Yellow). Color difference might not
be distinctive even when you make the adjustments for a
general video.
Picture Reset
Returns the Picture Mode to the default factory settings.
Auto Volume
Adjusts uneven sound volumes across all channels or signals
automatically to the most appropriate level.
To use this feature, select On; to turn off the feature, select
Off.
Clear Voice II
Differentiates the human sound range from other sounds,
which helps to make the human voices easier to hear.
To use this feature, select On; to turn off the feature, select
Off.
ENWW
Balance
Balances sound between the left and right speakers.
Sound Mode
Automatically selects the best sound tone quality, depending
on the video type that you are currently watching, from the
following options:
Ĺ
StandardâMost commanding and natural audio.
Ĺ
MusicâSelect for original sound when listening to music.
Ĺ
CinemaâSelect for sublime sound.
Ĺ
SportâSelect for sports broadcasting.
Ĺ
GameâSelect for dynamic sound when playing a game.
Treble
Adjust treble 0â100.
Bass
Adjust bass 0â100.
Using the On-Screen Display menu
33
Icon
Main menu
Submenu
Description
Reset
Resets the Sound Mode to the factory default settings.
Speaker
Adjusts internal speaker status (speakers sold separately).
To use this feature, select On; to turn off the feature, select
Off.
To use an external hi-fi stereo system, turn off the internal
speakers of the display.
TIME
OPTION
34
Chapter 4 Operating the display
DisplayPort
Audio Out
Select DisplayPort or Analog.
Clock
Resets the Day, Hour, and Minute if the current time is
incorrect.
On Time
The on time automatically switches the display on at the preset time.
Off Time
The off time automatically switches the display to standby at
the pre-set time.
Sleep Timer
Automatically turns off power when the time set by a user has
passed.
Auto Off
If active and there is no input signal, the display switches to off
mode automatically after 10 minutes.
Power On Delay
When connecting multiple displays and turning the power on,
the displays are turned on individually to prevent overload.
Language
Selects the language in which the OSD menu is displayed.
Input Label
Selects a label for each input source.
Key Lock
Set On to disable the display buttons to prevent tampering
with display settings. When set to On, the display options and
settings can be set or changed only with the remote control or
with HP Network Sign Manager.
Set ID
Use to assign a unique Set ID NO (name assignment) to each
product when several products are connected for display.
ISM Method
This option allows setting the display to alter the image to
avoid a static image being on the screen for a prolonged
period of time. This can avoid burn-in or image sticking and
prolong the life of the display.
DPM Select
Display Power Management SelectâTurns the power saving
mode On or Off.
Power Indicator
Sets the power indicator on the front of the display to On or
Off.
DDC-CI
Set this feature On to enable sending display OSD commands
via RS-232-C connection from the media player/computer.
DFC
Digital Fine ContrastâTo use this feature, select On; to turn
off the feature, select Off.
Interface Select
Select the connection you are using for remote display
management. For more information, refer to the HP Network
Sign Manager User Guide (available in English only) included
on the CD provided with the display.
ENWW
Icon
Main menu
Submenu
Description
Network Setup
Select the method of assigning an IP address to the display.
IP Mode options:
Ĺ
DHCPâAllows the display IP Address to be assigned
automatically when the display is attached to the network
through a router.
Ĺ
ManualâAllows you to assign the IP Address, Subnet
Mask, Gateway, and DNS Server.
See your network administrator for the correct manual entries
to enter. For more details on setting the display IP Address,
refer to the HP Network Sign Manager User Guide (available
in English only) included on the CD provided with the display.
TILE
Information
Contains the Serial No., SW Version (MNT), SW Version
(LAN), IP Address, and MAC Address information.
Factory Reset
Resets to the default factory settings.
Tile Mode
Tile Mode is used when multiple displays are configured in a
video wall and you want the image to be displayed on the
entire video wall, with each display showing its part of the total
image on the video wall.
To use Tile Mode, the multiple displays must be connected
with RGB IN/RGB OUT or DP IN/DP OUT. If you want to
issue commands to the displays in the wall with application
software or with the HP Network Sign Manager connected
through the serial interface, the displays must be connected
with RS-232-C IN/OUT.
For more information, refer to Using Tile Mode on page 39.
USB
ENWW
Tile ID
Selects the location of the Tile by setting an ID of 1â25.
Natural Mode
Setting this feature ON will compensate for the mullions (nonviewing area between active viewing areas in the video wall
where the display bezels meet) by stretching the image in
each display in the video wall so that the image is extended
into the non-viewing areas of the mullions. This eliminates
image distortion and displays the image in its natural
proportions across all displays.
H Size
Adjusts the horizontal size of the screen taking into account
the size of the bezel.
V Size
Adjusts the vertical size of the screen taking into account the
size of the bezel.
H Position
Moves the screen position horizontally.
V Position
Moves the screen position vertically.
Reset
Resets the Tile Mode configuration.
Photo List
View photo files on a USB storage device.
Music List
Play music files on a USB storage device.
Movie List
Play movie files on a USB storage device.
Using the On-Screen Display menu
35
Icon
Main menu
Submenu
Description
Lock System
Enables the USB security function to prevent the playing of
unauthorized files from a USB storage device with the HP
Media Sign Player.
Set Password
Allows you to set a password for the HP Media Sign Player.
NOTE: All USB menu options are disabled until a correct
password is entered. If you should forget your password, enter
7777 in the password field and that will take you to the Set
Password menu to change the password. The default
password is 0000. The master password is 7777.
NOTE: Depending upon the input setting, input video signal, Picture Mode, and option settings,
some OSD options might not be available to be set or changed, and these will appear greyed out in
the OSD menus.
Selecting an Aspect Ratio
The aspect ratio modes available for your selection depend on the current input source. Use the
following table to determine which mode is available for your display.
Mode
DisplayPort
DisplayPort
RGB
ARC
DTV
PC
PC
HDMI/
DVI
DTV
PC
16:9
Just Scan
Original
4:3
1:1
HDMI/
DVI
14:9
Zoom
Cinema Zoom 1
Adjusting the timer function
Use the remote control to set the following timer options.
Clock
The Clock menu allows you to reset the clock manually if the current time is incorrect.
36
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
TIME menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
the Clock menu.
Chapter 4 Operating the display
ENWW
3.
Press the right arrow button, and then use the down arrow or up arrow button to set the
hour (00hâ23h).
4.
Press the right arrow button, and then use the down arrow or up arrow button to set the
minutes (00â59 min).
On Time and Off Time
The On Time and Off Time menus let you set the display to automatically switch to standby at a preset time.
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
TIME menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
On Time or Off Time.
3.
Press the right arrow button, and then use the down arrow or up arrow button to set the
hour (00hâ23h).
4.
Press the right arrow button, and then use the down arrow or up arrow button to set the
minutes (00â59 min).
5.
Press the right arrow button, and then use the down arrow or up arrow button to select
On or Off.
NOTE: Once the On Time or Off Time is set, these functions operate daily at the preset time. The
Off Time function overrides the On Time function if they are set to the same time. When the On
Time is operated, the input screen is turned on just as it was turned off.
Sleep Timer
The Sleep Timer menu lets you set the display power to automatically turn off when the time set by a
user has passed.
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
TIME menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
the Sleep Timer menu.
3.
Press the right arrow button, and then use the down arrow or up arrow button to set the
hour (00hâ23h).
4.
Press the right arrow button, and then use the down arrow or up arrow button to set the
minutes (00â59 min).
NOTE: In the event of a power interruption (disconnection or power failure), the Sleep Timer clock
must be reset.
ENWW
Using the On-Screen Display menu
37
Auto Off
To set the display to switch to the off mode automatically after 15 minutes if Auto Off is active and
there is no input signal:
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
TIME menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
the Auto Off menu.
3.
Press the right arrow button, and then use the down arrow or up arrow button to select
On or Off.
Power On Delay
When connecting multiple displays and turning the power on, the displays are turned on individually
to prevent overload.
Using Key Lock
The display can be set up to disable the display control buttons on the back of the display. When the
Key Lock is set ON, display options might only be set or changed with the remote control or using
the HP Network Sign Manager.
38
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
OPTION menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
the Key Lock menu.
3.
To lock the OSD screen adjustment, press the right arrow button, and then use the down
arrow or up arrow button to select On.
4.
To unlock the OSD screen adjustment, press the MENU button on the remote control, and then
use the down arrow or up arrow button to select Off.
Chapter 4 Operating the display
ENWW
Using ISM Method
Displaying a static image on the screen for a prolonged period of time could result in burn-in or image
sticking. To avoid burn-in or image sticking or to fix a ghost or burned-in image, do not display a fixed
image for prolonged periods of time. Either turn the display off or change the image. If you display a
static image for long periods of time, you can help to avoid ghost images or burn-in by using the ISM
option as follows:
1.
Press the MENU button, and then use the down arrow or up arrow button to select the
OPTION menu.
2.
Press the right arrow button, and then use the down arrow or up arrow button to select
the ISM Method menu.
3.
Select one of the following menu options:
Ĺ
NormalâLeave on Normal if you do not want the ISM function to be active. When the
display is turned OFF, the ISM setting will be reset to Normal, regardless of which ISM
mode was ON when the display was turned off.
Ĺ
OrbiterâThe screen will move two pixels every two minutes, alternately moving left, right,
up, and down. Orbiter will remain on until changed in the ISM menu.
Ĺ
InversionâThis function can be used to fix a ghost or burned-in image. This function will
invert the image colors every 30 minutes. If the screen image is inverted and you enter the
USB function, images displayed in this function will be inverted. The inversion function will
remain on until changed in the ISM menu.
Ĺ
White washâThis function can also be used to fix a ghost or burned-in image. This
function will fill the screen with solid white. This helps to remove permanent images burned
into the screen. Pressing any key on the remote control will exit the White Wash function
and return the screen to Normal.
Using Tile Mode
Tile Mode is used to extend an image across multiple displays in a video wall. You can define up to a
5 x 5 video wall and the displays can be in either landscape or portrait orientation. Tile Mode allows
you to assign each display its relative position (number) in the wall starting at the upper-left corner
and down each row from left to right. Each display will automatically show the corresponding part of
the full image as shown in the following figure.
Assign the correct position number to each display as follows:
MENUPICTURETILETile ModeOK3x3CloseTile IDOK1 (for display #1, 2 for
display #2, etc. ... 9 for display #9)CloseNatural ModeOKON (compensate for the mullions
to display an image without distortion across the video wall)OKEXIT
ENWW
Using the On-Screen Display menu
39
Each display must be connected to every other display, using either RGB IN/RGB OUT or DP IN/DP
OUT as shown in the following figure. If you want to issue display commands from the media player/
computer, you must connect each display with RS-232-C IN/RS-232-C OUT just like the video
connections.
Figure 4-1 Tile Mode 3x3 video wallâConnecting displays with DP IN/DP OUT
Display In
Display In
D i s p l ay I n
Display Out
Display Out
Display Out
Display In
Display In
D i s p l ay I n
Display Out
Display Out
Display Out
Display In
Display In
D i s p l ay I n
Display Out
Display Out
Display Out
40
Chapter 4 Operating the display
ENWW
5
Operating the touch screen
Plug and play (Microsoft Windows 7 and Windows Vista)
When you connect the USB cable between the display and a media player/computer with Microsoft
Windows 7 or Windows Vista operating system, the device will be found and the Windows touch
drivers will be installed automatically by the Windows operating system. The software may take a few
minutes to install and a message will be displayed on the lower right corner of the screen indicating
that the Windows touch drivers have been installed successfully. Once you install the Windows touch
driver, you can select, launch, and drag objects using the touch screen gestures. To make a
selection, touch the screen. The touch driver installation program will not install drivers for Microsoft
Windows Vista or Microsoft Windows 7 operating system. Microsoft plug-and-play touch drivers are
already included in those operating systems for these displays.
NOTE: Refer to Connecting the USB (Universal Serial Bus) cable on page 25 for instructions on
connecting the USB cable.
To verify that the touch driver is installed, on the Windows 7 desktop go to Start > Control Panel >
System and Security > System and ensure that Pen and Touch Input Available with 2 Touch
Points is listed in the System section.
Touch software installation for Microsoft Windows XP
For the touch screen to function properly when using Microsoft Windows XP, you must install the HP
touch driver by using the touch driver installation program on the CD included with your display.
The touch driver installation program will not install drivers for Microsoft Windows Vista or Microsoft
Windows 7 operating systems. The plug-and-play touch drivers are already included in these
operating systems for the digital signage displays.
NOTE: There are no Windows Vista or Windows 7 touch drivers on the CD included with the display
and you can not install the Microsoft Windows XP driver if you are using either Windows Vista or
Windows 7.
Installing the software from the CD
The CD that comes with digital signage displays contains files that you can install to communicate
with the touch screen and use the touch screen with Windows applications.
To install the touch driver from the CD:
ENWW
1.
Insert the CD in the media player/computer.
2.
Click Install Touch Driver. To continue, click Next and follow the instructions on the screen to
install the touch driver.
Plug and play (Microsoft Windows 7 and Windows Vista)
41
3.
After setup has finished installing the touch driver, select Yes to restart and click Finish.
4.
Connect the Touch screen display cable (USB) to your PC.
After installing the touch driver, connecting the USB cable, and restarting your media player/
computer, the Found New Hardware Wizard is displayed to complete the driver installation. To
install the IR Touch Device Driver:
1.
Select Yes, this time only and click Next to continue.
2.
Select Install from a list or specific location (Advanced) and click Next to continue.
3.
In the Browse For Folder window that displays, select the folder that contains drivers for your
hardware.
4.
In the Choose your search and installation options window, accept the default option of
Search for the best driver in these locations and the checked Include this location in the
search. Click Next to continue.
5.
Select the RNDPLUS Touch USB Driver (oem25.inf) in the hardware list and click Next.
6.
If a Hardware Installation warning displays about the driver not passing Windows Logo testing,
click Continue Anyway.
7.
When prompted that files are needed from the IR Touch Controller Installation Disk, browse to
the location of the file and click OK.
8.
When the wizard finishes installing the software, click Finish to close the wizard.
To Uninstall the Touch Monitor driver:
1.
Select Start > Programs > Uninstall iNexio Touch Driver to open the IR Touch Driver Setup
Maintenance program and modify or uninstall the current installation.
2.
Select the Remove option to remove all installed features and click Next.
3.
Click Yes to confirm you want to remove the touch driver.
4.
Select Yes and click Finish to restart the media player/computer to complete the uninstall
process.
Installing the software from the Internet
To install the touch driver from the Internet:
42
1.
Got to http://www.hp.com/support.
2.
Select your country/region.
3.
Select your language.
4.
Select Download drivers and software (and firmware) and enter you display model name and
number.
5.
Follow the instructions on the screen to download the Setup.exe file.
6.
Open the file and follow the directions in the InstallShield Wizard to install the software.
7.
To verify that the software installed, go to Start > All Programs, and ensure that the iNexio
folder appears in the Start menu.
Chapter 5 Operating the touch screen
ENWW
Calibrating the touch screen
It is not necessary to calibrate the touch screen when you initially begin using it in landscape mode. It
may become necessary, however, if you notice that the cursor does not correspond to the actual
position where the screen is being touched, or if you change the display orientation to portrait from
landscape mode. To calibrate the touch screen when using Windows 7:
1.
On the Windows 7 desktop, go to Start > Control Panel > Hardware and Sound > Tablet PC
Settings.
2.
On the Tablet PC Settings' Display tab, press the Calibrate button. The calibration window will
be displayed
3.
On the calibration window, tap the crosshairs each time they appear in the corners of the screen.
When complete, a dialog box will appear asking if you want to save the calibration data.
4.
Select Yes on the dialog box to save the calibration data and close the calibration window.
Calibrating the touch screen using the calibration tool for
Windows XP
If it becomes necessary to calibrate the touch screen after installing the Microsoft Windows XP touch
driver, or if you change the display from landscape to portrait orientation, follow the steps below.
1.
Go to Start > All Programs > iNexio and select HIDcal. The HIDcal dialog will appear on the
screen.
2.
Click the Manual button to open the calibration window.
3.
Touch the crosshairs in each corner of the screen as directed.
Customizing the touch screen
You can customize the touch settings in Microsoft Windows 7 to align with your personal preferences.
For example, you can change the menus to appear on the right side or left side of the screen based
on whether you write with your left hand or right hand by going to Start > Control Panel > Hardware
and Sound > Tablet PC Settings and selecting the Other tab.
You can further customize the touch settings by going to Start > Control Panel > Hardware and
Sound > Pen and Touch. The Pen and Touch dialog allows you to:
Ĺ
adjust the settings for each pen action
Ĺ
change navigational flick settings
Ĺ
change settings for handwriting personalization
Ĺ
adjust settings for each touch action
Ĺ
adjust touch panning gestures
To customize the touch settings in Microsoft Windows Vista to align with your personal preferences,
go to Start > Control Panel > Tablet PC Settings to change where menus appear on the screen by
ENWW
Calibrating the touch screen
43
indicating whether you write with your left hand or right hand. Go to Start > Control Panel > Pen and
Input Devices to:
Ĺ
change navigational flick settings
Ĺ
change settings for handwriting personalization
Ĺ
adjust settings for each touch action
Ĺ
adjust touch panning gestures
Using the touch keyboard and writing tab
You can input data into applications using either the touch keyboard or the writing tab on the Tablet
PC Input Panel in Microsoft Windows Vista or Windows 7. To open the Tablet PC Input Panel, go to
Start > All Programs > Accessories > Tablet PC > Tablet PC Input Panel.
To switch between the touch keyboard and the writing tab, tap the Touch Keyboard button or the
Writing Tab button in the upper left corner of the panel.
You can change the settings on the Tablet PC Input Panel by tapping the Tools button in the upper
left corner of the Tablet PC Input Panel and selecting Options.
Finger operation
The touch function may replace the mouse after you start the Microsoft Windows operating system
and introduce appropriate gesture judgement. Gesture judgement and related Windows software
applications are listed below:
Finger Operation
Windows 7
Windows Vista
Windows XP
Drag
Click
Double-Click
Single-touch Digitizer
Multi-touch Digitizer
Use your finger or the provided stylus for touch applications.
NOTE: The touch function may need about 7 seconds to resume if the USB cable is re-plugged or
the media player/computer resumes from sleep mode (suspend mode).
44
Chapter 5 Operating the touch screen
ENWW
Upgrading the firmware
HP provides firmware upgrades so that your system can take advantage of the latest technology
available. If you are encountering problems with your touch screen, try upgrading the firmware.
NOTE: HP touch controller firmware upgrades may be limited depending on the operating system
you are using.
CAUTION: DO NOT terminate the USB Downloader program or power off your system during the
firmware upgrade. Should power be lost during the firmware update, after the system reboots follow
the steps below to restart the firmware download.
To upgrade the firmware:
1.
Go to http://www.hp.com/support.
2.
Select your region.
3.
Select Download drivers and software (and firmware) and enter your display model number
(HP LD4220tm or LD4720tm).
CAUTION: Before proceeding to the next step, ensure that your display is connected to the
media player/computer with the touch USB cable. The USB cable is required to enable the
firmware upgrade.
4.
Accept the default software driver language selection and select the operating system you are
using.
5.
Select Firmware Updater, and follow the directions on the screen.
6.
When the F/W Update Finished message box appears, click OK.
NOTE: It will take about 7â10 seconds after the firmware upgrade to be able to use touch
screen functions. The wait time may vary depending on your media player/computer.
ENWW
Upgrading the firmware
45
6
Multi-Display touch screen setup
Multi-display touch screen setup allows up to four displays connected to one media player/computer
to be touch screen enabled.
NOTE: Multi-display touch screen setup is available only in Microsoft Windows 7 (Home Premium
and above). It is not supported in any other operating system.
1.
Click the Windows Start button and select Control Panel.
2.
Select Hardware and Sound.
3.
Select Tablet PC Settings.
4.
On the Display tab under Configure, run Setup.
5.
In the Identify pen or touch input screens window, select Touch input.
6.
Touch screen #1 to match it to the Display. Then press Enter to move to the next screen.
7.
Repeat step 6 for each additional screen.
HP recommends the following graphics cards for multi-display support.
Ĺ
ATI Radeon HD 5450
Ĺ
NVIDIA GeForce GT320
Ĺ
NVIDIA GeForce 315
Ĺ
NVIDIA GeForce G210
Ĺ
ATI Radeon HD 4350
Ĺ
NVIDIA GeForce G100
Ĺ
ATI Radeon HD 4650
Ĺ
NVIDIA GeForce 9300 GE
Ĺ
NVIDIA Quadro NVS 450*
* Requires additional purchase of DisplayPort to HDMI adapter
46
Chapter 6 Multi-Display touch screen setup
ENWW
7
Using the HP Media Sign Player
When you insert a USB storage device into the USB port in the back of the display, the Enter
Password dialog box appears if you have the Lock System option turned ON. After entering your
password, the HP Media Sign Player options appear with Photo List, Music List, and Movie List.
If the USB storage device is already inserted when you turn the power on to the display, press the
USB button on the remote control and if you have the Lock System option ON, the Enter Password
dialog box appears along with the USB menu options. After entering your password, you can set or
change any of the USB options.
NOTE: The USB menu will not be displayed by pressing the USB button on the remote control while
the HP Media Sign Player is playing or while the OSD is active.
Using Photo List
After selecting the Photo List option, select the drive, and then select the folder with the
desired .JPG images. A list of the files in the folder appears. If you select a folder which does not
have supported files, the message No Photo List in the Folder appears. When you highlight a file,
you can mark the file to play by pressing the MARK button on the remote control. If you highlight the
file and then press the OK button for any file in the list, the Photo selection and menu options list
appears.
Information about using Photo List
Ĺ
PHOTO (*.JPEG) supporting file
Ĺ
Baselineâ15360 x 8640
Ĺ
Progressiveâ1024 x 768
Ĺ
You can view JPEG files only; non-supported files are displayed in the form of a bitmap.
Photo selection and menu options
ENWW
Ĺ
ViewâStarts the HP Media Sign Player. You will see the first image selected in the Photo List
and the Option box. This image remains on the display until you select Slideshow in the
Option box.
Ĺ
Mark AllâMarks all or selects all files in the selected folder from the Photo List.
Ĺ
DeleteâDeletes all the marked or selected files in the selected folder from the USB storage
device. When you choose Delete, a verification dialog box appears to confirm that you want to
delete the file.
Ĺ
CloseâCloses the Photo selection and menu options menu.
Using Photo List
47
Options on full-sized photo view
Ĺ
SlideshowâStarts the HP Media Sign Player. Only the files marked or selected are played
unless there are no files marked, and then all files in the selected folder play in the order they
appear in the Photo List. Set the time interval for all of the slides in the slide show in the
Options dialog box.
Ĺ
BGM (Background Music)âThe HP Media Sign Player plays audio files while showing the
selected images from the Photo List. Before selecting this option, you must select the Music
Folder for BGM in the Option dialog box. For more details on audio files, refer to Using Music
List on page 48.
Ĺ
Rotate icon
âUse the rotate icon to change the orientation of the slide show 90° with
each touch of the rotate icon (90°,180°, or 270°) clockwise. When the image is rotated using the
rotate icon, the image will be scaled to fill the screen, and any image not specifically created for
a portrait viewing (90° or 270°) might be distorted or out of proportion in the rotated orientation.
Ĺ
DeleteâDeletes files from the USB storage device. A verification dialog box appears to confirm
that you want to delete the file.
Ĺ
OptionâSets values for the Slide Speed and the Music Folder for BGM. Use the down arrow
, up arrow , left arrow , or right arrow button and the OK button to set values. Press OK
to save the settings. You cannot change the Music Folder while BGM is playing.
Ĺ
HideâHides the HP Media Sign Player Option menu. The Option menu hides automatically
after about 40 seconds if no options are chosen. To have the Option menu appear again, press
the OK button on the remote control.
Using Music List
After selecting the Music List option, select the drive, and then select the folder with the desired
audio files. A list of the files in the folder appears. If you select a folder which does not have
supported files, the message No Music List in the Folder appears. When you highlight a file, you
can mark the file to play by pressing the MARK button on the remote control. If you highlight and
press the OK button on any file in the list, the Music selection and menu options appears.
Information about using Music List:
48
Ĺ
MUSIC (*.MP3) supporting fileâPurchased music files (*.MP3) might contain copyright
restrictions; playback of these files might not be supported.
Ĺ
Bit rate 32 to 320kbps.
Ĺ
Sampling rate MPEG1 layer 3â32 kHz, 44.1 kHz, 48 kHz.
Ĺ
Damaged or corrupted music does not play but displays 00:00 in playtime.
Chapter 7 Using the HP Media Sign Player
ENWW
Music selection and menu options:
The Play , Pause II, Stop , Reverse , and Forward buttons on the remote control are
also available to use when playing music.
Ĺ
PlayâStarts the HP Media Sign Player. After Play is highlighted and OK is pressed, the
selected music titles are played in the order that they are listed in the music list. If no music titles
are selected, the player will play all the titles in the folder in the order they are listed in the Music
List. The list of titles will remain on the screen for about 40 seconds, and then an information
box with the name of the title and timer will be displayed and will move around the screen like a
screen saver. Press the OK button on the remote control to get the menu with titles to reappear.
Ĺ
Stop Play (if music is playing)âStops playing the music titles selected.
Ĺ
Play with PhotoâAllows you to select image files to be played along with the music titles
selected. When you highlight Play with Photo and press OK, the first selected music title will
begin playing and you will see the Photo List menu. Refer to Using Photo List on page 47 for
details on selecting image files to play. After selecting image files, the Photo List option dialog
box shows the music player as active and if you select Option, you see the name of the music
folder in the BGM window.
Ĺ
Mark AllâMarks all music titles in the folder.
Ĺ
DeleteâDeletes all the marked or selected files in the selected folder from the USB storage
device. When you choose Delete, a verification dialog box appears to confirm that you want to
delete the file.
Ĺ
CloseâCloses the Music selection and menu pop-up menu.
Using Movie List
After selecting the Movie List option, select the drive, and then select the folder with the desired
video files. A list of the files in the folder appears. If you select a folder which does not have
supported files, the message No Movie List in the Folder appears. When you highlight a file, you
can mark the file to play by pressing the MARK button on the remote control. If you highlight and
press the OK button on any file in the list, the Movie selection and menu options list appears.
Information about using Movie List
ENWW
Ĺ
MOVIE (*.avi) supporting file
Ĺ
Video formatâMPEG1, MPEG2, MPEG4 (does not support Microsoft MPEG 4-V2, V3)
Ĺ
Audio formatâMpeg, Mp3, PCM, Dolby Digital
Ĺ
Sampling frequencyâWithin 32k to 48 khz
Ĺ
Bit rateâ32k to 320 kbps
Ĺ
Subtitle formatâ*.smi/ *.srt/ *.sub (MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt (DVD Subtitle
System)
Ĺ
If the video and audio structure of recorded file is not interleaved, either video or audio is
outputted.
Ĺ
Maximum FPS (frame per second) can be reached only at SD level. FPS is 25 FPS (720*576) or
30 FPS (720*480) depending on Resolution.
Using Movie List
49
Ĺ
Files more than 25 FPS or 30 FPS or higher might not be played properly.
Ĺ
A video file name and its subtitle file name must be identical for it to be displayed.
Ĺ
Playing a video via a USB connection that does not support high speed might not work properly.
Ĺ
USB storage devices below USB 2.0 are supported as well, but they might not work properly in
the Movie List.
Ĺ
Files encoded with GMC (Global Motion Compensation) might not be played.
File
Video decoder
Audio codec
Max. resolution
mpg, mpeg, vob, dat
MPEG1, MPEG2
AC3, MPEG, MP3, PCM
720 x 576 @ 25p
Avi, m4v
MPEG4-SP, MPEG4-ASP,
XviD
AC3, MPEG, MP3, PCM
720 x 480 @ 30p
Extension name
Movie selection and menu options
Ĺ
PlayâPlays the selected movie
Ĺ
Mark AllâMarks all movies in the folder
Ĺ
DeleteâDeletes the selected movie item
Ĺ
CloseâCloses the pop-up menu
Table 7-1 Using the remote control for movies
50
Reverse and Fast
Forward buttons
When the movie is in play mode, press the Reverse button repeatedly to increase the
reverse speed (x2) (x4) (x8) (x16)
(x32). Press the Fast Forward button repeatedly to increase the forward speed (x2)
(x4) (x8) (x16) (x32).
Pause II button
During playback, press the Pause II button; a still screen appears. Press the Pause II button,
and then use the Forward button for slow motion. If no buttons are pressed on the
remote control for 10 minutes after pausing, the TV returns to the playback state.
Left arrow and right
arrow buttons
When using the left arrow or right arrow buttons during playback, a cursor indicating
the position can be viewed on the screen.
Play button
Press the Play button to return to normal playback.
ENERGY SAVING button
Press the ENERGY SAVING button repeatedly to change the brightness of your screen.
Chapter 7 Using the HP Media Sign Player
ENWW
A
Troubleshooting
Solving common problems
The following table lists possible problems, the possible cause of each problem, and the
recommended solutions.
Problem
Possible cause
Solution
No image is
displayed.
Power cord is
not connected.
Be sure the power cord is properly connected to the outlet.
Ĺ
Verify that the outlet has power to it.
Ĺ
Check that the fuse or breaker has not tripped or burned out.
See if the power switch is turned on.
Might need service.
Power is on,
power indicator
is blue, but the
screen appears
extremely dark.
Screen needs
adjustment.
Power indicator
is amber.
Display is in
power saving
mode.
Move the mouse or press any key on the keyboard.
Input signal is
out of frequency
range.
The signal from the media player/computer (video card) is out of the vertical or
horizontal frequency range of the display. Adjust the frequency range by referring to the
specifications in this manual (maximum resolution: RGBâ1920 x 1080 @ 60 Hz; HDMI
â1920 x 1080 @ 60 Hz; DisplayPortâ1920 x 1080 @ 60 Hz).
Out of Range
message
appears.
Adjust brightness and contrast again.
Backlight might need repair.
Turn off equipment and then back on.
NOTE: Vertical FrequencyâTo enable the user to watch the display, the screen
image should change multiple times every second like a fluorescent lamp. The vertical
frequency or refresh rate is the number of times the image displays per second. The
unit is measured in Hz.
Horizontal FrequencyâThe horizontal interval is the time to display one vertical line.
When 1 is divided by the horizontal interval, the number of horizontal lines displayed
every second can be tabulated as the horizontal frequency. The unit is measured in
kHz.
Check signal
cable message
appears.
Signal cable is
not connected.
The signal cable between the media player/computer and display is not connected.
Make sure that the signal cable is properly connected.
Press the INPUT button on the remote control to check the input signal.
ENWW
Solving common problems
51
Problem
Possible cause
Solution
Unknown
Product
message
appears when
the display is
connected.
Display driver is
not installed.
Install the display driver, which is provided with the display or download from the HP
website www.hp.com.
Key Lock On
message
appears when
pressing the
Menu button.
Key Lock
function is
turned on.
The control locking function prevents unintentional OSD setting changes. To unlock the
controls, simultaneously press the Menu button and right arrow button for several
seconds. (You cannot set this function using the remote control buttons. You can set
this function with the display only.)
The screen
looks abnormal;
screen position
is wrong.
Screen is out of
adjustment.
D-sub analog signal - press the AUTO button on the remote control to automatically
select the optimal screen status that fits into the current mode.
Lines appear on
the background
screen.
Screen is out of
adjustment.
D-sub analog signal - press the AUTO button on the remote control to automatically
select the optimal screen status that fits into the current mode.
Horizontal noise
appears or the
characters look
blurred.
Screen is out of
adjustment.
D-sub analog signal - press the AUTO button on the remote control to automatically
select the optimal screen status that fits into the current mode.
The screen
displays
abnormally.
Using an
incorrect input
signal.
The proper input signal is not connected to the signal port. Connect the signal cable
that matches with the source input signal.
An after image
appears when
the display is
turned off.
Using a fixed
image for too
long a period of
time.
If you used a fixed image for a long time, the pixels might be damaged. Use a screensaver function or set the OSD menu to the ISM Method.
No sound.
Audio cable not
connected.
Check that the audio cable is properly connected.
See if the Plug and Play function is supported by referring to the video card user
manual.
Check that the video card resolution and frequency are supported by the display. If the
frequency is out of range, set to the recommended resolution in the Control Panel
Display Settings of the operating system.
Adjust the volume.
Check if the sound is set properly.
52
Sound is too
dull.
Equalizer is not
balanced.
Select the appropriate sound equalize.
Sound is too
low.
Sound needs
adjusting.
Adjust the volume by pressing the volume buttons on the remote control.
Screen has
poor color
resolution (16
colors).
Color is not set
correctly.
Set the number of colors to more than 24 bit (true color). Select Control Panel
Display Settings Color quality in the operating system.
Screen color is
unstable or
mono colored.
Signal cable or
video card
connection is
loose.
Check the connection status of the signal cable, or reinsert the media player/computer
video card.
Black spots
appear on the
screen.
Black spots are
characteristics
of the LCD
panel.
Several pixels (red, green, white, or black color) might appear on the screen, which can
be attributable to the unique characteristics of the LCD panel. It is not a malfunction of
the LCD.
Appendix A Troubleshooting
ENWW
Problem
Possible cause
Solution
The power is
suddenly turned
off.
Sleep timer
setting is turned
on, or power is
interrupted.
Check that the sleep timer is set.
Touch function
is not
recognized
using Windows
XP.
Windows XP
driver is not
installed.
To use the touch function in Windows XP, you must install the driver. Refer to Touch
software installation for Microsoft Windows XP on page 41 for instructions.
Touch display is
not functioning
properly.
Firmware needs
to be upgraded.
Upgrade the firmware. Refer to Upgrading the firmware on page 45 for instructions.
Check the power control settings.
Using the Internet
For online access to technical support information, self-solve tools, online assistance, community
forums of IT experts, broad mutli-vendor knowledge base, monitoring and diagnostic tools, go to
www.hp.com/support
Preparing to call technical support
If you cannot solve a problem using the troubleshooting tips in this section, you might need to call
technical support. Contact your regional HP authorized service provider. Have the following
information available when you call:
ENWW
Ĺ
Display model number
Ĺ
Serial number for the display
Ĺ
Purchase date on invoice
Ĺ
Conditions under which the problem occurred
Ĺ
Error messages received
Ĺ
Hardware configuration
Ĺ
Hardware and software you are using
Using the Internet
53
B
Technical specifications
NOTE: All performance specifications are provided by the component manufacturers. Performance
specifications represent the highest specification of all HP's component manufacturers' typical level
specifications for performance; actual performance might vary either higher or lower.
HP Digital Signage Display
Table B-1 Specifications
LD4220tm
LD4720tm
Size
106.73 cm (42 in)
119.28 cm (47 in)
Type
TFT LCD panel
TFT LCD panel
Viewable image size
106.73 cm (42 in) diagonal
119.28 cm (47 in) diagonal
Pixel pitch
0.4845 x 0.4845 mm
(0.0191 x 0.0191 in) X RGB
0.5415 x 0.5415 mm
(0.0213 x 0.0213 in) X RGB
Without stand and
speaker
18.6 kg (41.01 lbs)
23.5 kg (51.80 lbs)
With speaker
19.3 kg (42.55 lbs)
24.2 kg (53.35 lbs)
With stand
21.9 kg (48.28 lbs)
26.8 kg (59.08 lbs)
With stand and
speaker
22.6 kg (49.82 lbs)
27.5 kg (56.21 lbs)
Without stand and
speaker
96.71 x 55.98 x 12.37 cm
(38.07 x 22.04 x 4.87 in)
107.95 x 62.46 x 12.29 cm
(42.50 x 24.59 x 4.84 in)
With speaker
96.71 x 55.98 x 12.37 cm
(38.07 x 22.04 x 4.87 in)
107.95 x 62.46 x 12.29 cm
(42.50 x 24.59 x 4.84 in)
With stand
96.71 x 63.50 x 25.86 cm
(38.07 x 25 x 10.18 in)
107.95 x 69.77 x 29.83 cm
(42.50 x 27.47 x 11.7 in)
With stand and
speaker
96.71 x 63.50 x 25.86 cm
(38.07 x 25 x 10.18 in)
107.95 x 69.77 x 29.83 cm
(42.50 x 27.47 x 11.7 in)
Rated voltage
AC 100-240 V~50/60 Hz 2.5 A
AC 100-240 V~50/60 Hz 3.0 A
Japan: AC 100 V~50/60 Hz 2.5 A
Japan: AC 100 V~50/60 Hz 3.0 A
Display
Weightâmaximum
Dimensions
(W x H x D)
Power
54
Appendix B Technical specifications
ENWW
Table B-1 Specifications (continued)
LD4220tm
LD4720tm
On mode
220 W Typical
270 W Typical
Sleep mode
1 W (RGB) / 2 W (HDMI/DVI)
1 W (RGB) / 2 W (HDMI/DVI)
1 W (RGB) / 2 W (DisplayPort)
1 W (RGB) / 2 W (DisplayPort)
(if LAN OFF is selected)
(if LAN OFF is selected)
RGB
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
HDMI/DVI
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
(if supported by OS or video card type)
(if supported by OS or video card type)
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
(if supported by OS or video card type)
(if supported by OS or video card type)
RGB
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
HDMI/DVI
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
(if supported by OS or video card type)
(if supported by OS or video card type)
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
(if supported by OS or video card type)
(if supported by OS or video card type)
RGB
30â83 kHz
30â83 kHz
HDMI/DVI
30â83 kHz
30â83 kHz
DisplayPort
30â83 kHz
30â83 kHz
RGB
56â75 Hz
56â75 Hz
HDMI/DVI
56â60 Hz
56â60 Hz
DisplayPort
56â60 Hz
56â60 Hz
Synchronization type
Separate/Digital
Separate/Digital
Input connector
15-pin D-Sub type, HDMI/DVI (digital),
RS-232C, DisplayPort, USB, LAN
15-pin D-Sub type, HDMI/DVI (digital),
RS-232C, DisplayPort, USB, LAN
0° to 40°C
0° to 40°C
Humidity 10% to 80%
Humidity 10% to 80%
â20° to 60°C
â20° to 60°C
Humidity 20% to 80%
Humidity 20% to 80%
RMS audio output
10 W + 10 W (R + L)
10 W + 10 W (R + L)
Input sensitivity
0.7 Vrms
0.7 Vrms
Speaker impedance
8 Ohms
8 Ohms
Power consumption
Resolutionâ
maximum
DisplayPort
Resolutionâ
recommended
DisplayPort
Horizontal frequency
Vertical frequency
Environmental
conditions
Operating
temperature
Storage temperature
Audio (select models)
ENWW
HP Digital Signage Display
55
HP LD4220tm dimensions (with optional stand and
speakers)
Figure B-1 HP LD4220tmâFront and side view
121 mm
(4.76 in)
933.2 mm
(36.74 in)
67.4 mm
(2.65 in)
16.9 mm
(.66 in)
526 mm
(20.7 in)
16.9 mm
(.66 in)
967 mm
(38 in)
123.7 mm
(4.87 in)
75.2 mm
(2.96 in)
16.9 mm
(.66 in)
559.8 mm
(22.03 in)
Updated Illustration Pending
69.6 mm
(2.74in)
620.5 mm
(24.43 in)
64.5 mm
(2.54 in)
70.41 mm
258.61 mm (2.77 in)
(10.18 in)
Figure B-2 HP LD4220tmâBack view
855.1 mm
(33.66 in)
113.9 mm
(4.48 in)
600 mm (23.62 in)
400 mm
(15.75 in)
Updated Illustration Pending
56
Appendix B Technical specifications
332 mm
(13.07 in)
56 mm
(2.2 in)
ENWW
HP LD4720tm dimensions (with optional stand and
speakers)
Figure B-3 HP LD4720tmâFront and side view
122.9 mm
(4.84 in) 72.9 mm
(2.87 in)
94.3 mm
(3.71 in)
1043.7 mm
(41.09 in)
129.2 mm
(5.09 in)
17.9 mm
(.70 in)
1079.5 mm
(42.5 in)
17.9 mm
(.70 in)
86.9 mm
(3.42 in)
588.7 mm
(23.18 in)
73.1 mm
(2.88 in)
17.9 mm
(.70 in)
624.6 mm
(24.59 in)
Updated Illustration Pending
111 mm
(4.37 in)
114.4 mm
(4.50 in)
298.3 mm
(11.74 in)
Figure B-4 HP LD4720tmâBack view
962 mm
(37.87 in)
800 mm
(31.50 in)
332 mm
(13.07 in)
146.3 mm
(5.76 in)
58.7 mm
(2.31 in)
400 mm
(15.75 in)
Updated Illustration Pending
ENWW
HP LD4720tm dimensions (with optional stand and speakers)
57
Recognizing preset display resolutions
The display resolutions listed below are the most commonly used modes and are set as factory
defaults. This display automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
Preset display modes
Table B-2 Factory preset display modes
Preset
Pixel format
Horizontal frequency
(kHz)
Vertical Frequency (Hz)
720 x 400
31.468
70.1
*2
640 x 480
31.469
59.94
640 x 480
37.5
75
*4
800 x 600
37.879
60.317
800 x 600
46.875
75
832 x 624
49.725
74.55
*7
1024 x 768
48.363
60
1024 x 768
60.123
75.029
*9
1280 x 720
44.772
59.855
*10
1280 x 1024
63.981
60.02
11
1280 x 1024
79.98
75.02
*12
1680 x 1050
65.290
59.954
*13
1920 x 1080
67.5
60
1 to 13 RGB mode
* HDMI/DisplayPort mode
DTV mode
58
HDMI/DVI (DTV)
DisplayPort
480i
480p
576i
576p
720p
1080i
1080p
Appendix B Technical specifications
ENWW
NOTE: DTV/PC selection on HDMI/DVI inputs is available for media player/computer resolutionsâ
640 x 480/60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz and DTV resolutionsâ480p, 720p, 1080p.
Power indicator
ENWW
Mode
LED indicator light
On Mode
Blue
Sleep Mode
Amber
Off Mode
Recognizing preset display resolutions
59
C
Command reference
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC. If the Set ID menu in Option is set to OFF, the monitor ID
value should be set between 1 and 99.
Connecting the cable
Connect the RS-232-C cable as shown in the following illustration. The RS-232-C protocol is used for
communication between the media player/computer and the display. You can turn the display on/off,
select an input source or adjust the OSD menu from the media player/computer.
RS-232C
RS-232C
RS-232C
RS-232C
(CONTROL)
(CONTROL)
(CONTROL)
(CONTROL)
OUT
OUT
OUT
OUT
IN
IN
IN
IN
RS-232-C configurations
7-Wire configurations
3-Wire configurations
(Standard RS-232-C cable)
(Not Standard)
media
player/
computer
60
Display
media
player/
computer
Display
RXD
TXD
RXD
TXD
TXD
RXD
TXD
RXD
GND
GND
GND
GND
DTR
DSR
DTR
DSR
DSR
DTR
DSR
DTR
RTS
CTS
RTS
CTS
Appendix C Command reference
ENWW
CTS
7-Wire configurations
3-Wire configurations
(Standard RS-232-C cable)
(Not Standard)
RTS
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9
(Female)
(Female)
(Female)
(Female)
RTS
Communication parameter
Ĺ
Baud Rateâ9600 baud rate (UART)
Ĺ
Data Lengthâ8 bit
Ĺ
Parity BitâNone
Ĺ
Stop Bitâ1 bit
Ĺ
Flow ControlâNone
Ĺ
Communication CodeâASCII code
Ĺ
Use a crossed (reverse) cable
Command reference list
ENWW
COMMAND1
COMMAND2
DATA1
01. Power
00Hâ01H
02. Input Select
07Hâ0BH
03. Aspect Ratio
01Hâ1FH
04. Screen Mute
00Hâ01H
05. Volume Mute
00Hâ01H
06. Volume Control
00Hâ64H
07. Contrast
00Hâ64H
08. Brightness
00Hâ64H
09. Color
00Hâ64H
10. Tint
00Hâ64H
11. Sharpness
00Hâ64H
12. OSD Select
00Hâ01H
13. Remote Lock/Key Lock
00Hâ01H
14. Balance
00Hâ64H
15. Color Temperature
00Hâ02H
16. Abnormal State
FFH
DATA2
DATA3
Command reference list
61
COMMAND1
COMMAND2
DATA1
DATA2
DATA3
17. ISM Method
01Hâ08H
18. Auto Configuration
01H
19. Key
Key Code
20. Tile Mode
00Hâ55H
21. Tile H Position
00Hâ14H
22. Tile V Position
00Hâ14H
23. Tile H Size
00Hâ64H
24. Tile V Size
00Hâ64H
25. Tile ID Set
00Hâ19H
26. Natural Mode (In Tile Mode)
00Hâ01H
27. Picture Mode (PSM)
00Hâ06H
28. Sound Mode
01Hâ05H
29. Fan Fault Check
FFH
30. Elapsed Time Return
FFH
31. Temperature Value
FFH
32. Lamp Fault Check
FFH
33. Auto Volume
00Hâ01H
34. Speaker
00Hâ01H
35. Time
00Hâ06H
00Hâ17H
00Hâ3BH
36. On Timer (On/Off Timer) Time
F1HâF4H
00Hâ17H
00Hâ3BH
00Hâ17H
00Hâ3BH
E0HâE4H
01Hâ80H
37. Off Timer (On/Off Timer) Time
F1HâF4H
E0HâE4H
01Hâ80H
62
38. Scheduling Input Select
F1HâF4H
39. Sleep Time
00Hâ08H
40. Auto Off
00Hâ01H
41. Power On Delay
00Hâ64H
42. Language
00Hâ09H
43. DPM Select
00Hâ01H
44. Reset
00Hâ02H
45. Energy Saving
00Hâ03H
46. Power Indicator
00Hâ01H
Appendix C Command reference
07Hâ0BH
ENWW
COMMAND1
COMMAND2
DATA1
47. Serial No.
FFH
48. S/W Verison
FFH
49. Input Select
60HâC0H
DATA2
DATA3
Transmission/Receiving Protocol
Transmission
[Command1][Command2][][Set ID][][Data][Cr]
*[Command 1]
First command (k, j, m, d, f, x)
*[Command 2]
Second command (a to z)
*[Set ID]
Set up the Set ID number of product. range: 01H to 63H. by setting
'0', server can control all products.
When operating with more than 2 sets using set ID as '0' at the
same time, do not check the ack message. Because all sets will
send the ack message, it is not possible to check all of the ack
messages.
*[Data]
To transmit command data.
Transmit 'FF' data to read status of command.
*[Cr]
Carriage Return
ASCII code '0 x 0 D'
*[]
ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][][Set ID][][OK][Data][x]
*The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At
this time, if the data is in data read mode, it indicates present status data. If the data is in data write
mode, it returns the data of the media player/computer.
Error Acknowledgement
[Command2][][Set ID][][NG][Data][x]
If there is an error, it returns NG
ENWW
Transmission/Receiving Protocol
63
01. Power (Command: a)
To control Power On/Off of the Set.
Transmission
[k][a][][Set ID][][Data][Cr]
[Data]
0: Power Off
1: Power On
Acknowledgement
[a][][Set ID][][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][][Set ID][][FF][Cr]
Acknowledgement
[a][][Set ID][][OK][Data][x]
[Data]
0: Power Off
1: Power On
64
Appendix C Command reference
ENWW
02. Input Select (Command: b) (Main Picture Input)
To select input source for the Set.
You can also select an input source using the INPUT button on the remote control.
Transmission
[k][b][][Set ID][][Data][Cr]
[Data]
7: RGB (PC)
8: HDMI/DVI (HD-DVD)
9: HDMI (PC)
A: DisplayPort (HD-DVD)
B: DisplayPort (PC)
Acknowledgement
[b][][Set ID][][OK][Data][x]
[Data]
7: RGB (PC)
8: HDMI/DVI (HD-DVD)
9: HDMI (PC)
A: DisplayPort (HD-DVD)
B: DisplayPort (PC)
ENWW
Transmission/Receiving Protocol
65
03. Aspect Ratio (Command: c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control
or in the Screen menu.
Transmission
[k][c][][Set ID][][Data][Cr]
[Data]
1: Normal Screen (4:3)
2: Wide Screen (16:9)
4: Zoom [HDMI (HD-DVD), DisplayPort (HDDVD)]
6: Original
7: 14:9 [HDMI (HD-DVD), DisplayPort (HDDVD)]
9: Just Scan [HDMI (HD-DVD), DisplayPort
(HD-DVD)]
When the RGB, HDMI/DVI-PC, DisplayPort-PC
mode (1:1)
10 to 1F: Cinema Zoom 1 to 16 [HDMI (HDDVD), DisplayPort (HD-DVD)]
Acknowledgement
[c][][Set ID][][OK][Data][x]
04. Screen Mute (Command: d)
To select screen mute on/off.
Transmission
[k][d][][Set ID][][Data][Cr]
[Data]
0: Screen mute off (Picture on)
1: Screen mute on (Picture off)
Acknowledgement
66
Appendix C Command reference
ENWW
[d][][Set ID][][OK][Data][x]
05. Volume Mute (Command: e)
To control On/Off of the Volume Mute.
Transmission
[k][e][][Set ID][][Data][Cr]
[Data]
0: Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
Acknowledgement
[e][][Set ID][][OK][Data][x]
[Data]
0: Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
06. Volume Control (Command: f)
To adjust Volume.
Transmission
[k][f][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
(Hexadecimal code)
Acknowledgement
[f][][Set ID][][OK][Data][x]
[Data]
ENWW
Min: 00H to Max: 64H
Transmission/Receiving Protocol
67
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
07. Contrast (Command: g)
To adjust screen contrast. You can also adjust the contrast in the Picture menu.
Transmission
[k][g][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
Acknowledgement
[g][][Set ID][][OK][Data][x]
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
68
Appendix C Command reference
ENWW
08. Brightness (Command: h)
To adjust screen brightness. You can also adjust the brightness in the Picture menu.
Transmission
[k][h][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
Refer to âReal data mappingâ as shown below.
Acknowledgement
[h][][Set ID][][OK][Data][x]
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
09. Color (Command: i) (Video Timing only)
To adjust the screen color. You can also adjust the color in the Picture menu.
Transmission
[k][i][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
(Hexadecimal code)
ENWW
Transmission/Receiving Protocol
69
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
Acknowledgement
[i][][Set ID][][OK][Data][x]
[Data]
Min: 00H to Max: 64H
(Hexadecimal code)
10. Tint (Command: j) (Video Timing only)
To adjust the screen tint. You can also adjust the tint in the Picture menu.
Transmission
[k][j][][Set ID][][Data][Cr]
[Data]
Red: 00H to Green: 64H
(Hexadecimal code)
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
70
Appendix C Command reference
ENWW
Acknowledgement
[j][][Set ID][][OK][Data][x]
[Data]
Red: 00H to Green: 64H
Tint real data mapping
0: Step 0 to Red
64: Step 100 to Green
11. Sharpness (Command: k) (Video Timing only)
To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
(Hexadecimal code)
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
Acknowledgement
[k][][Set ID][][OK][Data][x]
[Data]
ENWW
Min: 00H to Max: 64H
Transmission/Receiving Protocol
71
12. OSD Select (Command: l)
To control OSD on/off to the set.
Transmission
[k][l][][Set ID][][Data][Cr]
[Data]
0: OSD Off
1: OSD On
Acknowledgement
[l][][Set ID][][OK][Data][x]
[Data]
0: OSD Off
1: OSD On
13. Remote Lock/Key Lock (Command: m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote control and the local keys.
Transmission
[k][m][][Set ID][][Data][Cr]
[Data]
0: Off
1: On
Acknowledgement
[m][][Set ID][][OK][Data][x]
[Data]
0: Off
1: On
72
Appendix C Command reference
ENWW
14. Balance (Command: t)
To adjust the sound balance.
Transmission
[k][t][][Set ID][][Data][Cr]
[Data]
Min: 00H to Max: 64H
(Hexadecimal code)
00H: Step L50
64H: Step R50
Acknowledgement
[t][][Set ID][][OK][Data][x]
[Data]
Min: 00H to Max: 64H
00H: Step 0 to L50
64H: Step 100 to R50
Balance: L50 to R50
15. Color Temperature (Command: u)
To adjust the screen color temperature.
Transmission
[k][u][][Set ID][][Data][Cr]
[Data]
0: Medium
1: Cool
2: Warm
Acknowledgement
[u][][Set ID][][OK][Data][x]
ENWW
Transmission/Receiving Protocol
73
[Data]
0: Medium
1: Cool
2: Warm
16. Abnormal state (Command: z)
Abnormal State: Used to Read the power off status when Stand-by mode.
Transmission
[k][z][][Set ID][][Data][Cr]
[Data]
FF: Read
Acknowledgement
[z][][Set ID][][OK][Data][x]
[Data]
0: Normal (Power on and signal exist)
1: No signal (Power on)
2: Turn the display off by remote control
3: Turn the display off by sleep time function
4: Turn the display off by RS-232-C function
8: Turn the display off by off time function
9: Turn the display off by auto off function
17. ISM Method (Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][][Set ID][][Data][Cr]
74
Appendix C Command reference
ENWW
[Data]
1H: Inversion
2H: Orbiter
4H: White Wash
8H: Normal
Acknowledgement
[p][][Set ID][][OK][Data][x]
18. Auto Configure (Command: j u)
To adjust picture position and minimize image shaking automatically. It works only in RGB (PC)
mode.
Transmission
[j][u][][Set ID][][Data][Cr]
[Data]
1: To set
Acknowledgement
[u][][Set ID][][OK][Data][x]
19. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][][Set ID][][Data][Cr]
Data Key code: Refer to the IR Codes Table on page 93 section.
Acknowledgement
[c][][Set ID][][OK][Data][x]
ENWW
Transmission/Receiving Protocol
75
20. Tile Mode (Command: d d)
Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
[Data]
Description
00 or 11
Tile mode is off.
12
1 x 2 mode (column x row)
13
1 x 3 mode
14
1 x 4 mode
...
...
55
5 x 5 mode
The [Data] cannot be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
21. Tile H Position (Command: d e)
To set the Horizontal position.
Transmission
[d][e][][Set ID][][Data][x]
[Data]
Min: 00H to Max: 14H
00H: Step -10 (Left)
14H: Step 10 (Right)
Acknowledgement
[e][][Set ID][][OK/NG][Data][x]
76
Appendix C Command reference
ENWW
22. Tile V Position (Command: d f)
To set the Vertical position.
Transmission
[d][f][][Set ID][][Data][x]
[Data]
Min: 00H to Max: 14H
00H: Step -10 (Left)
14H: Step 10 (Right)
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
23. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
[d][g][][Set ID][][Data][x]
[Data]
Min: 00H to Max: 64H
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
ENWW
Transmission/Receiving Protocol
77
24. Tile V Size (Command: d h)
To set the Vertical size.
Transmission
[d][h][][Set ID][][Data][x]
[Data]
Min: 00H to Max: 64H
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
25. Tile ID Set (Command: d i)
To assign the Tile ID for Tiling function.
Transmission
[d][i][][Set ID][][Data][x]
[Data]
Min: 00H to Max: 19H
(Hexadecimal code)
Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
78
Appendix C Command reference
ENWW
26. Natural Mode (In Tile Mode) (Command: d j)
To assign the Title Natural mode for Tiling function.
Transmission
[d][j][][Set ID][][Data][x]
[Data]
0: Natural Off
1: Natural On
ff: Read Status
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
27. Picture Mode (Command: d x)
To adjust the picture mode.
Transmission
[d][x][][Set ID][][Data][x]
Data Structure
Data (Hex)
MODE
00
Vivid
01
Standard
02
Cinema
03
Sport
04
Game
05
Expert 1
06
Expert 2
Acknowledgement
[x][][Set ID][][OK/NG][Data][x]
ENWW
Transmission/Receiving Protocol
79
28. Sound Mode (Command: d y )
To adjust the Sound mode.
Transmission
[d][y][][Set ID][][Data][X]
Data Structure
Data (Hex)
MODE
01
Standard
02
Music
03
Cinema
04
Sport
05
Game
Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
29. Fan Fault check (Command: d w )
To check the Fan fault of the display.
Transmission
[d][w][][Set ID][][Data][x]
[Data]
Data is always FF (in Hex)
Data ff: Read Status
Acknowledgement
[w][][Set ID][][OK/NG][Data][x]
80
Appendix C Command reference
ENWW
[Data]
[Data] is the status value of the Fan fault.
0: Fan fault
1: Fan OK
2: N/A (Not Available)
30. Elapsed time return (Command: d l)
To read the elapsed time.
Transmission
[d][l][][Set ID][][Data][x]
[Data]
Data is always FF (in Hex)
Acknowledgement
[l][][Set ID][][OK/NG][Data][x]
[Data]
The data means used hours.
(Hexadecimal code)
31. Temperature value (Command: d n)
To read the inside temperature value.
Transmission
[d][n][][Set ID][][Data][x]
[Data]
Data is always FF (in Hex)
Acknowledgement
[n][][Set ID][][OK/NG][Data][x]
[Data]
ENWW
The data is 1 byte long in Hexadecimal.
Transmission/Receiving Protocol
81
32. Lamp fault Check (Command: d p)
To check lamp fault.
Transmission
[d][p][][Set ID][][Data][x]
[Data]
Data is always FF (in Hex)
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
[Data]
0: Lamp Fault
1: Lamp OK
2: N/A(DPM/Power Off)
33. Auto volume (Command: d u)
Automatically adjust the volume level.
Transmission
[d][u][][Set ID][][Data][x]
[Data]
0: Off
1: On
Acknowledgement
[u][][Set ID][][OK/NG][Data][x]
82
Appendix C Command reference
ENWW
34. Speaker (Command: d v)
Turn the speaker on or off.
Transmission
[d][v][][Set ID][][Data][x]
[Data]
0: Off
1: On
Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
35. Time (Command: f a)
Set the current time.
Transmission
[f][a][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
0: Monday
1: Tuesday
2: Wednesday
3: Thursday
4: Friday
5: Saturday
6: Sunday
[Data2]
00H to 17H (Hours)
[Data3]
00H to 3BH (Minutes)
Acknowledgement
[a][][Set ID][][OK/NG][Data1][Data2][Data3][x]
ENWW
Transmission/Receiving Protocol
83
When reading data, FFH is inputted for [Data1], [Data2] and [Data3]. In other cases, all are treated as
NG.
36. On Timer (On/Off Timer) Time (Command: f d)
Set On Timer.
Transmission
[f][d][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
1.
2.
3.
f1h to f4h (read one index)
e0h to e4h (delete one index),
e0h (delete all indexes)
01h to 80h (write) (Day of Week)
f1: read 1st index of On Time
List
e0: delete all indexes of On Time
List
bit0 (01h): Monday
f2: read 2nd index of On Time
List
e1: delete 1st index of On Time
List
bit1 (02h): Tuesday
f3: read 3rd index of On Time
List
e2: delete 2nd index of On Time
List
bit2 (04h): Wednesday
f4: read 4th index of On Time
List
e3: delete 3rd index of On Time
List
bit3 (08h): Thursday
bit4 (10h): Friday
e4: delete 4th index of On Time
List
bit5 (20h): Saturday
bit6 (40h): Sunday
bit7 (80h): Everyday
(1fh): Monday to Friday
(3fh): Monday to Saturday
(60h): Saturday to Sunday
[Data2]
00h to 17h, ffh (Hours)
[Data3]
00h to 3bh, ffh (Minutes)
When you read/delete the current on time list, all of [Data2][Data3] have to be 0xff.
ex1: fd 01 f1 ff ff - when you read 1st index of On Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On Time List
ex3: fd 01 3f 02 03 - when you write one On Time Data, "Monday to Saturday,
02:03"
84
Appendix C Command reference
ENWW
Acknowledgement
[d][][Set ID][][OK][Data1][Data2][Data3][x]
37. Off Timer (On/Off Timer) Time (Command: f e)
Set Off Timer.
Transmission
[f][e][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
1.
2.
3.
f1h to f4h (read one index)
e0h to e4h(delete one index),
e0h (delete all indexes)
01h to 80h (write) (Day of Week)
f1: read 1st index of On Time
List
e0: delete all indexes of On Time
List
bit0 (01h): Monday
f2: read 2nd index of On Time
List
e1: delete 1st index of On Time
List
bit1 (02h): Tuesday
f3: read 3rd index of On Time
List
e2: delete 2nd index of On Time
List
bit2 (04h): Wednesday
f4: read 4th index of On Time
List
e3: delete 3rd index of On Time
List
bit3 (08h): Thursday
bit4 (10h): Friday
e4: delete 4th index of On Time
List
bit5 (20h): Saturday
bit6 (40h): Sunday
bit7 (80h): Everyday
(1fh): Monday to Friday
(3fh): Monday to Saturday
(60h): Saturday to Sunday
[Data2]
ENWW
00h to 17h, ffh (Hours)
Transmission/Receiving Protocol
85
[Data3]
00h to 3bh, ffh (Minutes)
When you read/delete the current on time list, all of [Data2][Data3] have to be 0xff.
ex1: fd 01 f1 ff ff - when you read 1st index of On Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On Time List
ex3: fd 01 3f 02 03 - when you write one On Time Data, "Monday to Saturday,
02:03"
Acknowledgement
[e][][Set ID][][OK][Data1][Data2][Data3][x]
38. Scheduling Input select (Command: f u) (Main Picture Input)
To select input source for TV depending on day.
Transmission
[f][u][][Set ID][][Data1][][Data2][Cr]
[Data1]
f1h to f4h(write/read one index)
f1: read 1st index of On Time Input
f2: read 2nd index of On Time Input
f3: read 3rd index of On Time Input
f4: read 4th index of On Time Input
[Data2]
Data (Hex)
INPUT
07
RGB-PC
08
HDMI/DVI (HD-DVD)
09
HDMI/DVI (PC)
DisplayPort (HD-DVD)
DisplayPort (PC)
When you read/delete the current On Time Input, [Data2] needs to be 0xff.
ex1: fu 01 f1 ff - when you read 1st index of On Time Input
ex2: fu 01 f3 07 - when you write one On Time Input Data in to 3rd index, "RGB"
86
Appendix C Command reference
ENWW
Acknowledgement
[u][][Set ID][][OK][Data1][Data2][x]
39. Sleep Time (Command: f f)
Set Sleep Time.
Transmission
[f][f][][Set ID][][Data][Cr]
[Data]
0: Off
1: 10
2: 20
3: 30
4: 60
5: 90
6: 120
7: 180
8: 240
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
40. Auto Off (Command: f g)
Set Auto Sleep.
Transmission
[f][g][][Set ID][][Data][Cr]
[Data]
0: Off
1: On
Acknowledgement
ENWW
Transmission/Receiving Protocol
87
[g][][Set ID][][OK/NG][Data][x]
41. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on (Unit: second).
Transmission
[f][h][][Set ID][][Data][Cr]
[Data]
00H to 64H (Data value)
Real data mapping
0: Step 0
A: Step 10
F: Step 15
10: Step 16
64: Step 100
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
42. Language (Command: f i)
Set the OSD language.
Transmission
[f][i][][Set ID][][Data][Cr]
88
Appendix C Command reference
ENWW
[Data]
0: English
1: French
2: German
3: Spanish
4: Italian
5: Portuguese
6: Chinese
7: Japanese
8: Korean
9: Russian
Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
43. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][][Set ID][][Data][Cr]
[Data]
0: Off
1: On
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
44. Reset (Command: f k)
Execute the Picture, Screen and Factory Reset functions.
Transmission
[f][k][][Set ID][][Data][Cr]
ENWW
Transmission/Receiving Protocol
89
[Data]
0: Picture Reset
1: Screen Reset
2: Factory Reset
Acknowledgement
[k][][Set ID][][OK/NG][Data][x]
45. Energy saving (Command: f I)
To set the Power saving mode.
Transmission
[f][I][][Set ID][][Data][Cr]
[Data]
0: Off
1: (static level 1)
2: (static level 2)
3: (static level 3)
Acknowledgement
[I][][Set ID][][OK/NG][Data][x]
46. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][][Set ID][][Data][Cr]
[Data]
0: Off
1: On
Acknowledgement
[o][][Set ID][][OK/NG][Data][x]
90
Appendix C Command reference
ENWW
47. Serial no. Check (Command: f y)
To read the serial numbers
Transmission
[f][y][][Set ID][][Data][Cr]
[Data]
Data FF (to read the serial numbers)
Acknowledgement
[y][][Set ID][][OK/NG][Data1]to[Data13][x]
[Data]
The data format is ASCII Code.
48. S/W Version (Command: f z)
Check the software version.
Transmission
[f][z][][Set ID][][Data][Cr]
[Data]
FFH: Read
Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
49. Input Select (Command: x b)
To select input source for the display.
Transmission
[x][b][][Set ID][][Data][Cr]
ENWW
Transmission/Receiving Protocol
91
[Data]
60H: RGB (PC)
90H: HDMI/DVI (HD-DVD)
A0H: HDMI/DVI (PC)
B0H: DisplayPort (HD-DVD)
C0H: DisplayPort (PC)
Acknowledgement
[b][][Set ID][][OK][Data][x]
[Data]
60H: RGB (PC)
90H: HDMI/DVI (HD-DVD)
A0H: HDMI/DVI (PC)
B0H: DisplayPort (HD-DVD)
C0H: DisplayPort (PC)
IR codes
Use this method to connect your wired remote control port on the display.
Remote Control IR Code
Output waveform
Ĺ
Single pulse, modulated with 37.917kHz signal at 455kHz
Ĺ
Carrier Frequency
Ĺ
FCAR = 1/Tc=fosc/12
Ĺ
Duty Ratio = T1/Tc = 1/3
Configuration of frame
Ĺ
92
1st frame
Appendix C Command reference
ENWW
Ĺ
Repeat frame
Lead code
Repeat code
Bit description
Ĺ
Bit â0â
0.56 ms
1.12 ms
Ĺ
Bit â1â
0.56 ms
2.24 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
IR Codes Table
ENWW
Code
(Hex )
Function
Note
40
Up arrow
R/C Button
41
Down arrow
R/C Button
06
Right arrow
R/C Button
IR codes
93
94
Code
(Hex )
Function
Note
07
Left arrow
R/C Button
08
POWER ON/OFF
R/C Button
C4
MONITOR ON
R/C Button (Discrete IR Code)
C5
MONITOR OFF
R/C Button (Discrete IR Code)
09
MUTE
R/C Button
95
Energy Saving
R/C Button
0B
INPUT
R/C Button
43
MENU
R/C Button
5B
EXIT
R/C Button
4D
PSM
R/C Button
44
OK
R/C Button
10
Number Key 0
R/C Button
11
Number Key 1
R/C Button
12
Number Key 2
R/C Button
13
Number Key 3
R/C Button
14
Number Key 4
R/C Button
15
Number Key 5
R/C Button
16
Number Key 6
R/C Button
17
Number Key 7
R/C Button
18
Number Key 8
R/C Button
19
Number Key 9
R/C Button
79
ARC (MARK)
R/C Button (Discrete IR Code)
02
Vol+
R/C Button
03
Volâ
R/C Button
E0
Bright (Page UP)
R/C Button
E1
BrightÓ (Page Down)
R/C Button
28
BACK
R/C Button
99
AUTO CONFIG
R/C Button
72
ID ON (Red Color)
R/C Button (Discrete IR Code)
71
ID OFF (Green Color)
R/C Button
63
(Yellow Color)
R/C Button
61
(Blue Color)
R/C Button
7B
TILE
R/C Button
B0
Play
R/C Button
Appendix C Command reference
ENWW
ENWW
Code
(Hex )
Function
Note
B1
Stop
R/C Button
BA
Pause II
R/C Button
8F
Reverse
R/C Button
8E
Fast forward
R/C Button
D5
RGB PC
Discrete IR Code (Input RGB PC Selection)
C6
HDMI/DVI
Discrete IR Code (Input HDMI/DVI Selection)
76
ARC (4:3)
Discrete IR Code (Only 4:3 mode)
77
ARC (16:9)
Discrete IR Code (Only 16:9 mode)
AF
ARC (ZOOM)
Discrete IR Code (Only ZOOM, Cinema ZOOM
mode)
C8
USB
IR codes
95
D
Agency regulatory notices
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Ĺ
Reorient or relocate the receiving antenna.
Ĺ
Increase the separation between the equipment and the receiver.
Ĺ
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Ĺ
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Hewlett Packard Company may void the user's authority to operate the
equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods
to maintain compliance with FCC Rules and Regulations.
Declaration of Conformity for products marked with the
FCC logo (United States only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause
undesired operation.
For questions regarding the product, contact:
96
Appendix D Agency regulatory notices
ENWW
Hewlett Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-HP-INVENT (1-800 474-6836)
For questions regarding this FCC declaration, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number found on the product.
Canadian notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Avis Canadien
Cet appareil numÊrique de la classe B respecte toutes les exigences du Règlement sur le matÊriel
brouilleur du Canada.
European Union regulatory notice
Products bearing the CE marking comply with the following EU Directives:
Ĺ
Low Voltage Directive 2006/95/EC
Ĺ
EMC Directive 2004/108/EC
Ĺ
Ecodesign Directive 2009/125/EC, where applicable
CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by
HP.
Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or
product family and available (in English only) either within the product documentation or at the
following web site: www.hp.eu/certificates (type the product number in the search field).
The compliance is indicated by one of the following conformity markings placed on the product:
ENWW
Canadian notice
97
For non-telecommunications products and for EU
harmonized telecommunications products, such
as BluetoothÂŽ within power class below 10mW.
For EU non-harmonized telecommunications
products (If applicable, a 4-digit notified body
number is inserted between CE and !).
Please refer to the regulatory label provided on the product.
The point of contact for regulatory matters is: Hewlett-Packard GmbH, Dept./MS: HQ-TRE,
Herrenberger Strasse 140, 71034 Boeblingen, GERMANY.
German ergonomics notice
HP products which bear the âGSâ approval mark, when forming part of a system comprising HP brand
computers, keyboards and monitors that bear the âGSâ approval mark, meet the applicable ergonomic
requirements. The installation guides included with the products provide configuration information.
Japanese notice
Korean notice
Power cord set requirements
The display power supply is provided with Automatic Line Switching (ALS). This feature allows the
display to operate on input voltages between 100â120V or 200â240V.
The power cord set (flexible cord or wall plug) received with the display meets the requirements for
use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is
approved for use in that country.
98
Appendix D Agency regulatory notices
ENWW
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage
and current rating marked on the product. In addition, the cross-sectional area of the wire must be a
minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and
12 feet (3.6 m). If you have questions about the type of power cord to use, contact an authorized HP
service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
Japanese power cord requirements
For use in Japan, use only the power cord received with this product.
CAUTION: Do not use the power cord received with this product on any other products.
Product environmental notices
Materials disposal
This HP product contains mercury in the fluorescent lamp in the display LCD that might require
special handling at end-of-life.
Disposal of this material can be regulated because of environmental considerations. For disposal or
recycling information, contact the local authorities or the Electronic Industries Alliance (EIA)
www.eiae.org.
Disposal of waste equipment by users in private households in the
European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling or waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact the local city office, the household waste disposal service or
the shop where you purchased the product.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH (Regulation EC
No 1907/2006 of the European Parliament and Council). A chemical information report for this
product can be found at www.hp.com/go/reach.
ENWW
Product environmental notices
99
HP recycling program
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries. For more information about recycling programs, go to www.hp.com/recycle.
Restriction of Hazardous Substances (RoHS)
A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that
manufacturers provide Material Content Declarations for certain categories of electronic products
offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit
www.hp.com/go/jisc0950.
11363-2006
11363-2006
100 Appendix D Agency regulatory notices
ENWW
Turkey EEE regulation
In Conformity with the EEE Regulation
EEE YĂśnetmeli ine Uygundur
Ukraine Restriction of Hazardous Substances
$ & < ? \ ?
^ ? $ ? $ , ^ < \ _
` $ {\ |? } 3 $ 2008 1057.
The equipment complies with requirements of the Technical Regulation, approved by the Resolution
of Cabinet of Ministry of Ukraine as of December 3, 2008, in terms of restrictions for the use of certain
dangerous substances in electrical and electronic equipment.
ENWW
Product environmental notices 101
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matĂŠriel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the âCEâ Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
⢠EN 55022
; Radio Frequency Interference
⢠EN 55024
; Electromagnetic Immunity
⢠EN 61000-3-2
; Power Line Harmonics
⢠EN 61000-3-3
; Voltage Fluctuations
⢠EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCOâ99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numĂŠrique de la classe B
01
Regulatory Information cont.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Developmentâs website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCOâ99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCOâ99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCOâ99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCOâ99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCOâ99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
â˘
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
⢠The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
⢠Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCOâ99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCOâ03 (TCOâ03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCOâ03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCOâ03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
⢠Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
⢠Energy-saving mode after a certain time â beneficial
both for the user and the environment
⢠Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
⢠Electromagnetic fields
03
Regulatory Information cont.
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einflieĂen lassen. Zusätzliche
Informationen Ăźber unsere âgrĂźneâ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our âgreenâ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection delâenvironnement
LGE. a publiĂŠ sa 'DĂŠclaration en faveur dâun
environnement plus propre' en 1994 et celle-ci est restĂŠe,
depuis lors, un principe directeur de notre entreprise.
Cette dĂŠclaration a servi de base Ă notre rĂŠflexion et nous
a permis de prendre en compte Ă la fois les aspects
ĂŠconomiques et sociaux de nos activitĂŠs, tout en
respectant lâenvironnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkĂźndete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung fßr eine sauberere
Umwelt). Seitdem dient dieses Ideal als fĂźhrendes Prinzip
des Unternehmens. Diese Erklärung war die Basis fßr die
DurchfĂźhrung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Ăberlegungen mit einbezogen wurden.
Wir fÜrdern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezĂźglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activitĂŠs en faveur de la
prĂŠservation de lâenvironnement et câest dans cet esprit
que nous dĂŠveloppons nos produits : nous rĂŠduisons au
minimum les matières dangereuses qui entrent dans leur
composition et lâon ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui prĂŠsentent
un risque pour lâenvironnement. Il est donc important que
celui-ci soit recyclÊ après usage.
LGE. traite les moniteurs en fin de cycle conformĂŠment Ă
une mĂŠthode de recyclage respectueuse de
lâenvironnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites rĂŠpartis dans le monde
entier. De nombreux composants sont rĂŠutilisĂŠs et
recyclÊs, et les matières dangereuses, ainsi que les
mĂŠtaux lourds, sont traitĂŠs selon un procĂŠdĂŠ ĂŠcologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un lâun de nos reprĂŠsentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
kĂśnnen. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er auĂer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
RĂźcknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr Ăźber unser Recyclingprogramm erfahren
mÜchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rĂ´le de notre entreprise dans lâamĂŠlioration de
lâenvironnement. Pour plus de renseignements sur notre
politique âverteâ, rendez visite Ă notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
econĂłmicos y medioambientales.
Informazioni per la tutela dellâambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente piĂš pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attivitĂ a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attivitĂ a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dellâambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservaciĂłn
del medio ambiente y desarrollamos nuestros productos
especĂficamente para que se ajusten a la filosofĂa que
protege el entorno.
Reducimos al mĂĄximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
InformaciĂłn para el reciclaje
Este monitor puede contener piezas que entraĂąen riesgos
medioambientales. Es importante reciclar este monitor
despuĂŠs de su utilizaciĂłn.
LGE. trata todos los monitores usados siguiendo un
mĂŠtodo de reciclaje que no daĂąa al entorno. Contamos
con diversos sistemas de recuperaciĂłn y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias daĂąinas y los metales pesados se tratan
siguiendo un mĂŠtodo que no perjudique al medio
ambiente. Si desea obtener mĂĄs informaciĂłn acerca del
programa de reciclaje, pĂłngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. Ă
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dellâambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visiĂłn y nuestras polĂticas en un mundo
mĂĄs limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evoluciĂłn como empresa.
Visite nuestra pĂĄgina Web para obtener mĂĄs informaciĂłn
sobre nuestras polĂticas ecolĂłgicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo piĂš pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica âverdeâ.
http://www.lge.com/about/environment/html/Recycling.jsp
PortuguĂŞs
Informaçþes relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde entĂŁo
como um princĂpio administrativo de orientação. A
Declaração Ê a base que nos tem permitido realizar
atividades favoråveis ao ambiente com consideração
atenta aos aspectos econĂ´micos, ambientais e sociais.
EspanĂľl
InformaciĂłn para la conservaciĂłn
medioambiental
LGE. presentĂł la 'DeclaraciĂłn para un entorno mĂĄs limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La DeclaraciĂłn
es la base que nos ha permitido llevar a cabo tareas que
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
Regulatory Information cont.
especificamente o conceito de favorĂĄvel ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, nĂŁo hĂĄ cĂĄdmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informaçþes relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. Ă importante que ele seja reciclado
apĂłs o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados atravĂŠs
de um mĂŠtodo de reciclagem agradĂĄvel ao ambiente. HĂĄ
vårios sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarĂŁo por tratamento atravĂŠs de um mĂŠtodo
favorĂĄvel ao ambiente.
Para obter mais informaçþes sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visĂŁo e nossas polĂticas relacionadas a
um mundo mais limpo selecionando a questĂŁo do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informaçþes
sobre nossas polĂticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
ÂťĂĂĂĂâĄËĂË ĂĂ ĂĹâĄĂĂ ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë
Nederlands
ÂŹ 1994 âĂâ°Ă ĂĂĂĂâĄËĂË LGE ĂĂĂ¡ĂĂĂĂââĄĂâĄ
'ĆĂĂĂâĄďŁżâĄËĂË LG ĂĂ ĂĹâĄĂĂ ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë',
ĂĂĂĂâĄË Ă ĂĂÄą ĂĂ ĂĂĂĂĂĂ ĂĂĂĂâĂËĂ ĂĂĂËĂĂĂĂ
ĂĂâĄâĂĂĂĂË. Ă⥠ĂĂĂĂâĂ ËĂĂĂ â°ĂĂĂâĄďŁżâĄËĂĂ ĂË ĂĂĂâĂĂ
ĂĂâ°ĂĂĂËø â°ĂĂĂĂâĂË, Ă¡ĂĂĂĂËĂââĄËËĂĂ
¡ĂĂĂĂâĄĂĂĂĂø ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë, Ăâ°ĂĂËË Ăà ËĂĂĂ
â°ĂĂĂĂĂĂ âĂĂĂâĄĂĂĂ ËĂĂĂĂĂĂËĂĂĂĂĂ, ËĂĂĂĂâĂËĂĂĂĂĂ Ă
ĂĂËĂâĄĂ¸ĂËĂ âĄĂĂĂĂĂâĄĂ.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
ĂË ĂĂĂĂĂĂĂĂĂĂ â°ĂËĂĂøĂĂĂø ĂĂ ĂĹâĄĂĂ
ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë, Ăâ°ĂĂËË ĂĂĂ¡ĂĂ âĂĂĂâĄĂĂĂ
âĄĂâĄÂˇĂĂĂĂ ĂâĄÂŻĂĂ ĂĂâ°ĂĂËĂĂ â ĂĂĂĂâĂĂĂĂâĂĂ Ă
ĂĂĂËĂĂËĂĂĂ ËĂĂĂĂâĂËĂĂĂĂà ¡ĂĂĂĂâĄĂĂĂĂĂĂ.
ĂË ĂâĂâ°ĂĂ Ă ĂĂĂĂĂĂĂĂ ĂĂâ°ĂĂâĄĂĂĂ ĂĂâĄĂĂËÄą
âĂËĂĂĂâ â ĂâĄÂŻĂĂ ĂĂâ°ĂĂËĂĂ. ĂâĄĂĂĂĂ, â ĂâĄÂŻĂÄą
ĂĂĂĂĂĂâĄÄą âË ĂĂ ĂâĄĂâ°ĂĂĂ ĂâĄâ°ĂĂË.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
ÂťĂĂĂĂâĄËĂË ĂĂ ĂĂĂĂĂĂâĄËĂĂ ĂĂÄąĂâ°Ăâ
âşĂĂĂ ĂĂĂĂĂĂ ĂĂĂĂĂ ĂĂâ°ĂĂâĄĂ¸ ĂĂĂĂĂĂĂĂĂË,
ĂĂĂĂËĂ ĂĂâĂĂ ĂâĄĂĂĂĂĂ ĂËĂ¡ ĂĂĂĂâĄËËĂĂ ĂĂâ°Ă.
06
Regulatory Information cont.
ĂĂĂ¡ĹĂâ°ĂĂĂ ĂĂĂĂĂĂĂĂââĄĂ¸ ĂĂĂĂĂĂ ĂĂĂĂĂ
ĂĂĂĂøĂĂââĄĂĂË.
KĂĂĂâĄËĂË LGE ĂĂĂâĄÂˇâĄĂËââĄĂĂ âĂà ¡âĄĂĂââĄĂĂËĂ
ĂĂĂĂĂĂďŁżË Ă ĂĂĂĂËÂ¸Ë ËĂĂĂĂâĂËĂĂĂĂ ĂĂĂĂĂĂĂĂâĂ
ĂĂĂĂâ°âĄ ĂĂĂĂĂĂâĄËĂĂ ĂĂÄąĂâ°Ăâ. ĹĂ âĂĂĂĂ ĂĂĂ
â°ĂĂĂĂâĂËĂ ĂĂĂĂĂĂË ĂĂĂĂĂĂâĄËĂĂ ĂĂÄąĂâ°Ăâ Ă âĂĂââĄĂâĄ
ĂĂĂĂøĂĂââĄĂĂĂĂ ĂĂâ°ĂĂËĂĂ. ĂĂĂâĂĂ ĂĂĂĂĂĂĂĂĂË
¡Ăâ°ĂĂ âĂĂĂËĂĂ ĂĂĂĂøĂĂââĄĂË Ă ĂĂĂĂĂĂĂĂââĄĂË, â ĂĂ
âĂĂË ĂâĄĂ âĂâ°ĂËĂ âĂËĂĂĂâ⥠à ĂËĂĂĂËĂ ĂĂĂâĄĂĂË
¡Ăâ°ĂĂ Ă¡âĄÂˇĂĂâĄĂË Ă ĂĂĂĂËÂ¸Ë ËĂĂĂĂâĂËĂĂĂĂ
ĂĂĂĂĂĂĂĂâĂ ĂĂĂĂâ°âĄ.
⥠¡ĂĂĂĂ ĂĂâ°ďŁżĂ¡ĂĂĂ ĂĂĂĂĂâĄËĂĂĂ ĂĂ ĂâĄÂŻĂĂ
ĂĂââĄĂĂĂ ĂĂĂĂĂĂâĄËĂĂ ĂĂÄąĂâ°Ăâ Ă¡âĄËâĄĂĂĂø Ă
ĂĂĂĂĂĂĂĂ ĂĂĂĂâĄâËĂĂĂ ĂĂĂ ĂĂâ°ĂĂâĄâĂĂĂĂË
ĂĂĂĂâĄËĂĂ LG.
ĂË ĂĂĂĂĂĂĂĂĂĂË Ă⥠Ă¡ĂĂĂĂËĂĂĂĂ ËĂĂĂĂâĂËĂĂĂĂĂ
¡ĂĂĂĂâĄĂĂĂĂĂĂ, ĂĂâĄâË ĂĂ¡à ËĂĂÂ¸Ë âĂĂ¡âĄĂ¸ĂĂË ĂâĄËĂĂĂ
ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë. ĆĂĂĂĂĂĂĂĂøĂĂË ĂĂĂĂĂâĄËĂË
Ă ĂâĄÂŻĂĂ ĂĂĂĂĂĂĂĂ ĂĂ ĂĹâĄĂĂ ĂĂĂĂâĄËËĂĂ ĂĂâ°Ë âË
ĂĂĂĂĂĂ ĂâĄĂĂĂ Ă⥠ĂâĄÂŻĂĂ ĂâĄĂĂĂ:
http://www.lge.com/about/environment/html/Recycling.jsp
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
07
Regulatory Information cont.
WEEE
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autoritĂ locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni piĂš dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
English
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en Üverkryssad
soptunna pü hjul sitter pü en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bĂśr
kasseras via andra vägar än de som finns fÜr
hushüllsavfall, helst via fÜr ändamület avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat pü rätt sätt
sĂĽ bidrar du till att fĂśrhindra negativa
konsekvenser fÜr miljÜn och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan fĂĽr av kommunen,
renhüllningsverket eller den butik där du kÜpte
produkten.
French
Ălimination de votre ancien appareil
1.Ce symbole, reprĂŠsentant une poubelle sur
roulettes barrĂŠe d'une croix, signifie que le
produit est couvert par la directive europĂŠenne
2002/96/EC.
2.Les ĂŠlĂŠments ĂŠlectriques et ĂŠlectroniques
doivent ĂŞtre jetĂŠs sĂŠparĂŠment, dans les videordures prĂŠvus Ă cet effet par votre municipalitĂŠ.
3.Une ĂŠlimination conforme aux instructions aidera
Ă rĂŠduire les consĂŠquences nĂŠgatives et risques
ĂŠventuels pour l'environnement et la santĂŠ
humaine.
4.Pour plus d'information concernant l'ĂŠlimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures mÊnagères ou
encore la magasin oĂš vous avez achetĂŠ ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
08
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger pü miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fĂĽs ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkÜ- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristÜÜn ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Greek
âďŹĂĂĂâĂ ĂĂË ďŁżÂˇĂĂÂżË ĂÂˇË ĂËĂĂĂËâšË
1.ŸĂ¡à ¤Ă¡ ĂĂËďŹĂ â°Ă¡Ĺ¤ĂĂĂ ĂĂ â°âĄĂâĂĂĂ ĂĂďŹË
â°Ă¡ĂĂ¡ĂäĂĂË ĂÂżĂ¡ĹĂË ÂˇďŁżĂĂĂĂĂĂÂżĂËĂ, ĂďŹĂĂ Ăà ĂĂËďŹĂ
Ă¡ĂâĄďŁżĂĂĂÂˇĂ ÂˇďŁżďŹ ĂĂĂ EËĂË¡ËĂâš Oâ°ĂĂâşÂˇ 2002/96/EOK.
2.H ¡ďŹĂĂĂâĂ ďŹĂËĂ ĂËĂ ĂĂĂĂĂĂĂĂĂĂ Ă¡à ĂĂĂĂĂĂĂĂĂĂĂĂ
ĂĂËďŹĂĂËà äĂĂ Ă¡ ĂâşĂĂĂ¡à ¯ËĂĂĂĂÂż ÂˇďŁżďŹ Ă¡ ĂĂĂĂĂÂż
ĂĂĂĂ¡ĂÂż ¡ĂĂĂâşĂĂ¡Ă¡ äĂË Ă¡ĹĂĂĂĂäĂËĂ
ĂĂĂ¡Ă¡ĂĂÂżĂĂËĂ ĂËĂĂĂĂâšË ¡ĂĂĂĂĂĂÂżĂËĂ, ĂĂ ĂĂâşĂË
¤¯ĂËĂ â°ĂĂĂĂËĂĂĂÄąĂâş ĂâşĂĂ ÂˇďŁżďŹ ĂĂĂ ĂËâ¤ĂĂĂĂĂ âš ÂˇďŁżďŹ ĂĂË
ĂĂĂĂÂ¤Ë ÂˇĂ¯¤Ë.
3.H ĂËĂĂ⚠¡ďŹĂĂĂâĂ ĂĂË ďŁżÂˇĂĂÂżË ĂÂˇË ĂËĂĂĂËâšË Ĺ¡
âĂĂÄąâšĂĂĂ ĂĂĂà ¡ĂĂĂĂ⚠ĂĹ¡ĂĂà ¡ĂĂĂĂĂĂĂĂ ĂËĂĂĂĂĂ
ËË ďŁżĂĂË Ăà ĂĂĂâÂżĂĂĂĂ Ă¡à ĂĂĂ ËĂĂâşÂˇ ĂĂË ÂˇĂÄąĂĂĂË.
4.°Ă¡ ĂĂ ĂĂĂĂĂĂĂĂâşË ĂĂĂĂĂĂĂâşĂË ĂÂŻĂĂĂĂÂż ĂĂ ĂĂĂ
¡ďŹĂĂĂâĂ ĂĂË ďŁżÂˇĂĂÂżË ĂÂˇË ĂËĂĂĂËâšË, ĂĂĂĂĂĂËĂâšĂĂĂ ĂĂ
Ăà ¡ĂĂďŹâ°âşĂ ĂĂĂĂďŹ ĂĂ¡ĂĂâşĂ, ËĂĂĂĂâşÂˇ â°Ă¿ĹĂĂĂË ĂĂĂĂ¡ĂĂĂ
¡ĂĂĂĂĂĂÂżĂËĂ âš ĂĂ Ă¡Ă¡Ăâş ÂˇďŁżďŹ ĂĂ ĂĂâşĂ ¡ĂĂĂÂżĂ¡ĂĂ ĂĂ
ĂĂËďŹĂ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte mßssen
getrennt vom HausmĂźll Ăźber dafĂźr staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäĂen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persÜnlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
CĂłmo deshacerse de aparatos elĂŠctricos y
electrĂłnicos viejos
1.Si en un producto aparece el sĂmbolo de un contenedor
de basura tachado, significa que ĂŠste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos elĂŠctricos o electrĂłnicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a travĂŠs de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pĂşblica.
4.Para obtener mĂĄs informaciĂłn sobre cĂłmo deshacerse de
sus aparatos elĂŠctricos y electrĂłnicos viejos, pĂłngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquiriĂł el producto.
Danish
SĂĽdan smider du dit gamle apparat ud
1.NĂĽr der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjĂŚlp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Regulatory Information cont.
Portuguese
Hungarian
Slovak
Polish
Czech
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : ko-KR Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 최선미 Title : EMISSION TEST REPORT Create Date : 2011:06:20 13:35:52Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2011:06:20 13:37:41+09:00 Metadata Date : 2011:06:20 13:37:41+09:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:2ef1c3f0-cc06-43bf-bba5-622b5c1e3821 Instance ID : uuid:ec1062d7-c864-4dcd-b693-3f767bf0b7ee Page Count : 123 Author : 최선미EXIF Metadata provided by EXIF.tools