LG Electronics USA IPS235VX LCD Monitor User Manual

LG Electronics USA LCD Monitor

User Manual

www.lg.comOWNER’S MANUALLCD MONITORIPS225VIPS235VLCD MONITOR MODELPlease read this manual carefully before operating the your set and retain it for future reference.ENGLISHMODEL NO.:IPS235*XIPS225*X
2ENGENGLISHTABLE OF CONTENTSCONTENTS3 ASSEMBLING AND PREPARING3 Unpacking4 Parts and buttons6 Setting up the Monitor set 6 - Attaching the Stand Base6 - Detaching the Stand Base 7 - Mounting on a table8 - Mounting on a wall10 USING THE MONITOR SET10 Connecting to a PC10 - D-SUB connection10 - DVI-D connection10 - HDMI connection12 CUSTOMIZING SETTINGS12 Accessing The Main Menus13 Customizing Settings13 - Menu Settings14 - PICUURE15 - 20 TROUBLESHOOTING 22 SPECIFICATIONS 2224 P24 Indicator COLOR16 -DISPLAY16 -VOLUME17 -OTHERE18 MODE Setting19 DUAL PACKAGE Settingreset Modes (Resolution)IPS225V23 IPS235V
3ENGENGLISHASSEMBLING AND PREPARINGStand BasePower CordCD(Owner's Manual) / CardD-SUB Cable(This signal cable may be attached to this product before shipping out.)DVI-D Cable(This cable is not included in all countries.)and accessories.ASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product yDo not use any unapproved accessories to ensure the safety and product life span. yAny damages or injuries by using unapproved accessories are not covered by the warranty. yThe accessories supplied with your product may vary depending on the model. yProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. yUser should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product.CAUTIONNOTE
4ENGENGLISHASSEMBLING AND PREPARINGParts and buttonsAC-IN/Power Indicator � Lighting On: Turned on Lighting Off: Turned offConnection panel (See p.10)Button (See p.13)(Power Button)HDMID-SUB DVI-D电源输入
5ENGENGLISHASSEMBLING AND PREPARINGButton DescriptionMENU Accesses the main menus.(See p.13)OSD LOCKED/UNLOCKEDThis function allows you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.MODEDUALAUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)The best display mode 1920 x 1080INPUT You can choose the input signal. �When two input signals are connected, you can select the input signal (D-SUB/DVI/HDMI) you want. �When only one signal is connected, it is automatically detected. The default setting is D-SUB.EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off.Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue.Use this button to enter USER , MOVE,TEXT, PHOTO,sRGB menus.(See p.18)Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19)
6ENGENGLISHASSEMBLING AND PREPARINGSetting up the Monitor set Attaching the Stand Base1 Place the Monitor set with the screen side down on a flat and cushioned surface.Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.CAUTIONCAUTIONDetaching the Stand Base and Body1 Place the Monitor set with the screen side down on a flat and cushioned surface.2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body. Attach the Stand Base and then tighten the screw to the right with a Coin.2 Stand BaseStand Base
7ENGENGLISHASSEMBLING AND PREPARINGMounting on a table1 Lift and tilt the Monitor set into its upright position on a table.Leave a 10 cm (minimum) space from the wall for proper ventilation.2 Connect the Power Cord to a wall outlet.3 Press (Power) button on the front switch panel to turn the power on.10 cm10 cm10 cm10 cmWhen you adjust the angle, do not hold the buttom of the Monitor set frame as shown on the following illustration, as may injure your fingers.Do not touch or press the screen when adjusting the angle of the monitor.WARNINGUnplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.CAUTIONNOTEFront Rear5 - 51
8ENGENGLISHASSEMBLING AND PREPARINGMounting on a wallFor proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.Please use VESA standard as below. y784.8 mm (30.9 inch) and under* Wall Mount Pad Thickness : 2.6 mm* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm y787.4 mm (31.0 inch) and above* Please use VESA standard wall mount pad and screws.10 cm10 cm10 cm10 cmUsing the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.Connect the Kensington security system cable between the Monitor set and a table.The Kensington security system is optional. You can obtain it from most electronics stores.NOTE
9ENGENGLISHUSING THE MONITOR SET yDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yUse only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yUse the screws that are listed on the VESA standard screw specifications. yThe wall mount kit will include an installation manual and necessary parts. yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yFor more information, refer to the instructions supplied with the wall mount.CAUTIONNOTEIPS225V/IPS235V 100 x 100M4ModelVESA (A x B)Standard screwNumber of screws 4
10ENGENGLISHUSING THE MONITOR SETUSING THE MONITOR SETConnecting to a PC yYour Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.D-SUB connectionTransmits analog video from your PC tothe Monitor set. Connect the PC and the Monitorset with the supplied D-sub 15 pin signal cable asshown in the following illustrations. yMac adapterFor Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. yWhen using a D-Sub signal input cable connector for Macintosh yIf you use HDMI PC, it can cause compatibility problem.NOTENOTEHDMID-SUBDVI-DRGB OUTHDMID-SUBDVI OUTDVI-DHDMID-SUBHDMI OUTDVI-DHDMI OUTDVI-D connectionTransmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.HDMI connectionTransmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.
11ENGENGLISH �When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/DVI-D/HDMI) respectively in Monitor set. �If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. �Some red, green, or blue spots may appear on the screen. This is normal. �"Self Image Setting" Function.This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) �‘AUTO’ Function.When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.(Only supported in Analog Mode)NOTE NOTE �Connect the signal input cable and tighten it by turning the screws clockwise. �Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. �Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.CAUTION Self Image Setting FunctionPress the power button on the front panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)USING THE MONITOR SET
12ENGENGLISHCUSTOMIZING SETTINGSCUSTOMIZING SETTINGSAccessing The Main Menus1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the desired menu item.3 Change the value of the menu item by pressing the buttons on the front of the Monitor set.To return to the upper menu or set other menu items, use the up arrow ( ) button.4 Select EXIT to leave the OSD menu.Monitor set ButtonsMONITOR SETUPMENU AUTO INPUTEXITMODE DUALMENU(See p.13)Sets the screen options.DUAL (See p.19) EXITExits the OSD menu.INPUTSets the external input.MODE (See p.18)Sets the mode.Different menu items are enabled depending on the type of input signal.  D-SUB / DVI Mode: MENU, MODE, DUAL, AUTO, INPUT, EXITNOTEMODE 12AUTO (See p.11)Optimizes the resolution.Sets the screen .
13ENGENGLISHCUSTOMIZING SETTINGSCustomizing SettingsMenu Settings1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Set the options by pressing the buttons on the front of the Monitor set.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Analog: D-SUB(Analog signal) input.Digital: DVI-D(Digital signal) input.HDMI: HDMI(Digital signal) input. The available progam settings are described below.Menu Analog Digital HDMI DescriptionLANGUAGE POWER INDICATORWHITE BALANCEORIGINAL RATIOSUPER ENEYGYFACTORY RESETTo customize the screen statusfor a user's operatingenvironmentOTHERSOVERSCANSub-menu VOLUME To adjust the volumeBRIGHTNESSCONTRASTSHARPNESSBLACK LEVELPICTURETo adjust the brightness, contrastTo customize the color of the screen.and sharpness of the screen● ●●●●●●●● ● ●●●●●●●●●●●●●●COLOR TEMP(PRESET/USER) GAMMACOLOR RESETCOLORDISPLAYHORIZONTALVERTICALCLOCKPHASESAVINGTo adjust the position of thescreen To improve the clarity andstability of the screen ●●●
14ENGENGLISHCUSTOMIZING SETTINGSPICTURE1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Select PICTURE by pressing the buttons on the front of the Monitor set and set the options.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.Menu DescriptionBRIGHTNESSCONTRAST SHARPNESSBLACK LEVELTo adjust the brightness of the screen. To adjust the contrast of the screen.To adjust the clearness of the screen.You can set the offset level. If you select'HIGH', the screen will be bright and if youselect ‘LOW’,(only for HDMI input)* Offset?As the criteria for video signal, itis the darkest screen the monitor canshow. the screen will be dark.
COLORThe available picture settings are described below.Menu DescriptionPRESETGAMMACOLOR RESESTSet your own gamma value. : COLOR TEMPSelect the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (More blue).USER RED: Set your own red color levels. GREEN: Set your own green color levels. BLUE: Set your own blue color levels. SIX COLOUR:WARM2.2NOCOLOR RESETUSERSIX COLORCOLORREDHUESATURATIONSIX COLOR15ENGENGLISHCUSTOMIZING SETTINGSSets and stores the hue and saturationfor six colors(RED/GREEN/BLUE/CYAN/MAGENTA/YELLOW) to satisfy thecolor requirements of a user. HUEAdjusts the screen hue.SATURATIONAdjusts the color sharpness on thescreen. Lower values sharpness weaker and colors lighterwhile sharpness stronger 1.8/2.0/2.2/2.4/2.6 On the monitor, high gamma valuesdisplay whitish images and low gamma values display blackish images.Resets the color settings to the factorydefault settings for the current inputdevice. make the colorand colors darker. 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Select COLOR by pressing the buttons on the front of the Monitor set and set the options.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.
16ENGENGLISHCUSTOMIZING SETTINGSDISPLAYThe available picture settings are described below.Menu DescriptionVOLUMEThe available picture settings are described below.Menu DescriptionCLOCKPHASEOVERSCANTo minimize any vertical bars orstripes visible on the screenbackground.The horizontal screen size will alsochange.To adjust the focus of the display. This item allows you to remove anyhorizontal noise the image of characters.To select the range of output imagefor DTV timing in HDMI input.(only for HDMI input)Recommend overscanfunction toturn on when connect AV equipment.HORIZONTALVERTICALTo move image left and right.To move image up and down.VOLUME To adjust the volume of headphone/Earphone.(Only for HDMI input)and clear or sharpen1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Select DISPLAY by pressing the buttons on the front of the Monitor set and set the options.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Select VOLUME by pressing the buttons on the front of the Monitor set and set the options.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.
17ENGLISHCUSTOMIZING SETTINGSOTHERThe available picture settings are described below.Menu DescriptionPress the , buttons to resetimmediately.To choose the language in which thecontrol names are displayed.LANGUAGEWHITEBALANCEIf the output of the video card isdifferent the required specifications,the color level may to video signal distortion. Using thisfunction, the signal level is adjustedto fit into the standard output level ofthe video card in order to provide theoptimal image.Activate this function when whiteand black colors are present in thescreen.Restore all factory default settings except"LANGUAGE." FACTORY RESETPOWERINDICATORUse this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.deteriorate dueORIGINAL RATIOSUPER ENEYGY SAVINGWIDEORIGINAL RATIO WIDESwitch to full screen mode according to input image signal.ORIGINALChange the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set ratio (16:9).SUPER ENEYGY SAVINGSets the SUPER ENERGY SAVING function.EXITOKON OFFRESETTOTAL POWER REDUCTION: 20 WTOTAL CO2 REDUCTION: 16 gSUPERSAVING : 5 W/hLEDSAVING: 12 W/hSUPER ENERGY SAVINGON Enables SUPER ENERGY SAVING you can save energy with this energy-efficientOFF Disables SUPER ENERGY SAVING.RESET Resets the values of total energy consumption reduction and CO2 emission reduction TOTAL POWER REDUCTION: How much power is saved while using the monitor. TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. SAVING DATA(W/h)584 mm (23 inch)SUPER SAVING 5 W/hLED SAVING 12 W/h545 mm (22 inch)4 W/h15 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.NOTEestimates. function.1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MENU button to display the options in the OSD menu.3 Select OTHERS by pressing the buttons on the front of the Monitor set and set the options.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.
18ENGLISHCUSTOMIZING SETTINGSMODE Setting1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the MODE button to display the options in the OSD menu.3 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.The available picture settings are described below.Menu DescriptionUSERMOVIETEXTPHOTOsRGBTUSER MOVIE TEXT PHOTO sRGBEXITsRGBMODEIt is a mode that the screen is adjusted to the best to view the videos.It is a mode that the screen is adjusted to the best for the text works.It is a mode that the screen is adjusted to the best to view pictures.It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.It is a mode that the screen is adjusted to the standard sRGB. Set the options by pressing the buttons on the front of the Monitor set.
19ENGLISHCUSTOMIZING SETTINGSDUAL PACKAGE Setting1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2 Press the DUAL button to display the options in the OSD menu.3 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.The available picture settings are described below.Menu DescriptionDUAL MONTOR OFFEXTENDEDONOFFCLONEDUAL WEBDUAL PACKAGE DUAL MONITOR12OFF EXTENDED CLONE12DUALWEBEXITOKMake the eye comfortable byreducing the background brightnessin the web page.If select OFF,CINEMA MODE is off.* Before using below functions, please install DUAL PACKAGE programme.* Only for D-SUB/DVI-D input.If select OFF,DUALMONITOR offBy selecting EXETNDED,user can use secondary monitor as extended mode of primary monitor.By selecting CLONE,user can use secondary monitor as done mode of primary monitor. Set the options by pressing the buttons on the front Monitor set.of the When monitor goes to Power Saving Mode, on pressing any buttons user can bring NOTEback monitor to normal mode
20ENGLISHTROUBLESHOOTINGTROUBLESHOOTINGCheck the following before calling for service.No image appearsIs the power cord of the display connected? Check and see if the power cord is connected properly to the power outlet.Is the power indicator light on? Press the Power button.Is the power on and the power indicator blue or green? Adjust the brightness and the contrast.Is the power indicator flickering? If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC.Do you see an "OUT OF RANGE" message on the screen? This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.Do you see a "CHECK SIGNAL CABLE" message on the screen? This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.Do you see a "OSD LOCKED" message on the screen?Do you see “OSD LOCKED” when you push MENU button? You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.Display image is incorrectDisplay Position is incorrect. Press the AUTO button to automatically adjust your display image to the ideal setting.On the screen background, verticalbars or stripes are visible. Press the AUTO button to automatically adjust your display image to the ideal setting. Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO button to automatically adjust your display image to the ideal setting. Check Control Panel ► Display ► Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).
21ENGLISHTROUBLESHOOTINGDisplay image is incorrectThe screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?Have you installed the display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function.  Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.  If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.  The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.CAUTION
22ENGLISHSPECIFICATIONSSPECIFICATIONS IPS225VDisplay Screen Type 54.5 cm (22 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 54.5 cmPixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. DigitalVideo Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolution Max D-SUB(Analog) : 1920 x 1080 @ 60 HzDVI / HDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,Digital)Power Consumption On Mode : 31 W(Typ.)Sleep Mode ≤ 0.3W Off Mode ≤ 0.3 W Power Input AC 100-240 V~ 50 / 60 Hz 1.2ADimensions(Width x Height x Depth)With Stand 51.3 cm x 39.8 cm x 19.1 cmWithout Stand 51.3 cm x 31.2 cm x 5.9 cmWeight 3.28 kgTilt Range -5° to 15°EnvironmentalconditionsOperating TemperatureOperating Humidity10°C to 35 °C20 % to 80 % Storage TemperatureStorage Humidity-10°C to 60 °C 5 % to 90 % non-CondensingStand Base Attached ( ), Detached (O)Power cord Wall-outlet typeProduct specifications shown above may be changed without prior notice due to upgrade of product functions.
23ENGLISHSPECIFICATIONSSPECIFICATIONS IPS235VDisplay Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 58.4 cmPixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. DigitalVideo Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolution Max D-SUB(Analog) : 1920 x 1080 @ 60 HzDVI / HDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,Digital)Power Consumption On Mode : 35W(Typ.)Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Power Input AC 100-240 V~ 50 / 60 Hz 1.2ADimensions(Width x Height x Depth)With Stand 54.7 cm x 41.7 cm x 19.1 cmWithout Stand 54.7 cm x 33.1 cm x 5.9 cmWeight 3.57 kgTilt Range -5° to 15°EnvironmentalconditionsOperating TemperatureOperating Humidity10°C to 35 °C20 % to 80 % Storage TemperatureStorage Humidity-10°C to 60 °C 5 % to 90 % non-CondensingStand Base Attached ( ), Detached (O)Power cord Wall-outlet typeProduct specifications shown above may be changed without prior notice due to upgrade of product functions.
24ENGLISHSPECIFICATIONSPreset Modes (Resolution)Display Modes (Resolution) Horizontal Frequency(kHz)Vertical Frequency(Hz) Polarity(H/V)720 x 400 31.468 70 -/+640 x 480 31.469 60 -/-640 x 480 37.500 75 -/-800 x 600 37.879 60 +/+800 x 600 46.875 75 +/+1024 x 768 48.363 60 -/-1024 x 768 60.123 75 +/+1152 x 864 67.500 75 +/+1280 x 1024 63.981 60 +/+1280 x 1024 79.976 75 +/+1680 x 1050 65.290 60 -/+1920 x 1080 67.500 60 +/+ Recommend ModeDisplay Modes (Resolution) Horizontal Frequency(kHz)Vertical Frequency(Hz)HDMI TIMINGIndicatorMode LED ColorOn Mode BlueSleep Mode Blinking BlueOff Mode Off480P576P720P720P1080i1080i1080P1080P31.5031.2537.5045.0028.1233.7556.2567.506050506050605060 Recommend Mode
Make sure to read the Safety Precautions before using the product.Keep the Owner’s Manual (CD) in an accessible place for future reference.The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.ENERGY STAR is a set of power-savingguidelines issued by the U.S.EnvironmentalProtection Agency(EPA).MODELSERIAL

Navigation menu