LG Electronics USA IPS237LY Part15 Subpart B-LCD Monitor User Manual IPS227 277L ENG 1 6A

LG Electronics USA Part15 Subpart B-LCD Monitor IPS227 277L ENG 1 6A

Contents

BEJIPS237LY_User Manual 2

©©©ò´¹ò½±³ÑÉÒÛÎŽÍ ÓßÒËßÔ×ÐÍ ÔÛÜ ÓÑÒ×ÌÑÎ×ÐÍîíéÔ×ÐÍîééÔд»¿-» ®»¿¼ ¬¸·- ³¿²«¿´ ½¿®»º«´´§ ¾»º±®» ±°»®¿¬·²¹ §±«® -»¬ ¿²¼ ®»¬¿·² ·¬ º±® º«¬«®» ®»º»®»²½»ò×ÐÍ ÔÛÜ ÓÑÒ×ÌÑÎ ÓÑÜÛÔ
îÌßÞÔÛ ÑÚ ÝÑÒÌÛÒÌÍCONTENTS3 ASSEMBLING AND PREPAR-ING3 Unpacking4 Parts and buttons5 Setting up the Monitor set 5 - Attaching the Stand Base6 - Detaching the Stand6 - Mounting on a table7 - Using the cable holder9 - Mounting on a wall10 USING THE MONITOR SET10 Connecting to a PC10 - D-SUB connection10 - HDMI connection12 CUSTOMIZING SETTINGS13 Customizing Settings13 - Menu Settings14 - PICTURE15 - COLOR16 - DISPLAY16 - VOLUME17 - OTHERS18 MY KEY Setting19 - SUPER ENERGY SAVING 20 - DUAL DISPLAY20 - DUAL WEB21 - True Color Finder 21 - MY KEY SETTING22 TROUBLESHOOTING24 SPECIFICATIONS 24 IPS237L25 IPS277L26 Preset Modes (Resolution)26 Indicator27 PROPER POSTURE27 Proper posture for using the Monitor set.28 LICENSES
íßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.Do not use any unapproved accessories to ensure the safety and product life span.Any damages or injuries by using unapproved accessories are not covered by the warranty. The accessories supplied with your product may vary depending on the model.Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.CAUTIONNOTEStand Body Stand BaseCD(Owner's Manual) / CardD-SUB Cable(This cable is not included in all countries.)DVI-D Cable(This cable is not included in all countries.)( Depending on the country ) ( Depending on the country )Power Cord AC-DC Adapter AC-DC Adapteror Two Screws
ìßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙParts and buttonsPower IndicatorLighting On: Turned onLighting Off: Turned offConnection panel (See p.10)Button (See p.12)(Power Button)
ëßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙSetting up the Monitor set Attaching the Stand Base1 Place the Monitor set with the screen side down on a flat and cushioned surface.Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.CAUTION2 Attach the ͬ¿²¼ Þ±¼§ from the monitor.Insert the two Lockers of the Stand Body right into the groove of the monitor head and secure them by pressing the left and right bottom sides.3 Secure the monitor and the ͬ¿²¼ Þ±¼§ with the 2 screws.4 Attach the ͬ¿²¼ Þ¿-» from the ͬ¿²¼ Þ±¼§ by turning the screw to the right with a ݱ·².LockerTighten the screws firmly to prevent the monitor from tilting forward. Do not over tighten.ÝßËÌ×ÑÒIf you don`t fasten the screw tightly, monitor will fall down and get damaged.WARNING
êßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙMounting on a table1 Lift and tilt the Monitor set into its upright position on a table.Leave a 10 cm (minimum) space from the wall for proper ventilation.2 Connect the AC-DC Adapter and Power Cord to a wall outlet.or 10 cm10 cm10 cm10 cm2 Turn the screw to the left, and then pull out the ͬ¿²¼ Þ¿-» from the ͬ¿²¼ Þ±¼§.Detaching the Stand1 Place the monitor with the screen side down on a flat and cushioned surface.3 Remove 2 screws and pull out the ͬ¿²¼ Þ±¼§ from the monitor.
éßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙUsing the cable holder3 Press (Power) button on the bottom switch panel to turn the power on.Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.CAUTIONCable holder
èßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙUsing the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit .Connect the Kensington security system cable between the Monitor set and a table.The Kensington security system is optional. You can obtain it from most electronics stores.NOTEWhen you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.Do not touch or press the screen when adjusting the angle of the monitor.Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.WARNINGTilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.NOTEFront Rear
çßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙMounting on a wallFor proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide.If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.1 Please, Use the screw and wall mount interface in accordance with VESA Standards.2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible.5 Please use VESA standard as below.784.8 mm (30.9 inch) and under* Wall Mount Pad Thickness : 2.6 mm Length 10 mm787.4 mm (31.0 inch) and above* Please use VESA standard wall mount pad and screws.ïð ½³ïð ½³ïð ½³ïð ½³Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty.  Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.Use the screws that are listed on the VESA standard screw specifications.The wall mount kit will include an installation manual and necessary parts.The wall mount bracket is optional. You can obtain additional accessories from your local dealer.The length of screws may differ depending on the wall mount. Be sure to use the proper length.For more information, refer to the instructions supplied with the wall mount.CAUTIONNOTEVESA (A x B) 75 x 75Standard screw M4Number of screws 4
ïð ËÍ×ÒÙ ÌØÛ ÓÑÒ×ÌÑÎ ÍÛÌUSING THE MONITOR SETConnecting to a PCYour Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.D-SUB connectionTransmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.Mac adapterFor Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.When using a D-Sub signal input cable connector for MacintoshIf you use HDMI PC, it can cause compatibility problem.NOTENOTEHDMI connectionTransmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.
ïïËÍ×ÒÙ ÌØÛ ÓÑÒ×ÌÑÎ ÍÛÌWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/DVI-D/HDMI) respectively in Monitor set.If you turn the Monitor set on while it is cold, the screen may flicker. This is normal.Some red, green, or blue spots may appear on the screen. This is normal."Self Image Setting" Function.This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)‘AUTO’ Function.When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.(Only supported in Analog Mode)NOTE NOTEConnect the signal input cable and tighten it by turning the screws clockwise.Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen.Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.CAUTION Self Image Setting FunctionPress the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)
ïî ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍCUSTOMIZING SETTINGS1 Press the desired button on the bottom of the Monitor set.2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.To return to the upper menu or set other menu items, use the up arrow ( ) button.3 Select EXIT to leave the OSD menu.ÓÛÒËÓÇ ÕÛÇßËÌÑ×ÒÐËÌÛÈ×ÌÚËÒÝòMonitor set ButtonsButton DescriptionAccesses the main menus.(See p.13)OSD LOCKED/UNLOCKEDThis function allows you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.Use this button to enter MY KEY menu.For more information.(See p.18)Use this button to enter PICTURE MODE, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB,MY KEY SETTING menus.(See p.18)When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)The best display mode 1920 x 1080You can choose the input signal. HDMI) you want. D-SUB.EXITExit the OSD(On Screen Display). (Power Button) Turns the power on or off.Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red.
ïíÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍCustomizing SettingsMenu Settings1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2buttons.3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.MENU > NEXT MENUAnalogDigitalHDMI DescriptionPICTURE SHARPNESS To adjust the clearness of the screen .BLACK LEVEL To set offset levelOVER SCAN To improve the clarity and stability of the screen RESPONSE TIMECOLORGAMMATo customize the color of the screenCOLOR TEMPSIX COLORCOLOR RESETDISPLAYHORIZONTAL To adjust the position of the screenVERTICALCLOCK To improve the clarity and stability of the screen PHASEVOLUME To adjust the volumeOTHERS LANGUAGE To customize the screen status for a user's operating environmentPOWER INDICATORWHITE BALANCEAnalog: D-SUB(Analog signal) input.Digital: DVI-D(Digital signal) input.HDMI: HDMI(Digital signal) input. MENUAnalogDigitalHDMI DescriptionBRIGHTNESS To adjust the brightness, contrast of the screen CONTRASTWIDE/ORIGINAL WIDESwitch to full screen mode according to input image signal.ORIGINALChange the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set ratio (16:9).RESET Restore all factory default settings. Press the , buttons to reset immediately.
ïì ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍPICTURE1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE4buttons.5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.MENU > NEXT MENU > PICTURE DescriptionSHARPNESS To adjust the clearness of the screen.BLACK LEVEL You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’, the screen will be dark.(only for HDMI input)* Offset?As the criteria for video signal, it is the darkest screen the monitor can show. OVER SCAN To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment.RESPONSE TIME If you set FAST, you enable the Response Time Control function.If you set NORMAL, you disenable the Response Time Control function.
ïëÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍCOLOR1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR4 Enter to COLOR5buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.MENU > NEXT MENU > COLOR DescriptionGAMMA Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images.COLOR TEMP CUSTOMSet your own red color levels. Set your own green color levels. Set your own blue color levels.Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue).SIX COLOR Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user. HUE Adjusts the screen hue.SATURATION Adjusts the color sharpness on the screen. Lower values make the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark.COLOR RESET Resets the color settings to the factory default settings for the current input device.
ïê ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍDISPLAY1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY4 Enter to DISPLAY5buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.VOLUME1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select VOLUME4 Enter to VOLUME56 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.MENU > NEXT MENU > DISPLAY DescriptionHORIZONTAL To move image left and right. VERTICAL To move image up and down.CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.MENU > NEXT MENU > VOLUME DescriptionVOLUME To adjust the volume of headphone/earphone.(Only for HDMI input)
ïéÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍOTHERS1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select OTHERS4 Enter to OTHERS5buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.MENU > NEXT MENU > OTHERS DescriptionLANGUAGE To choose the language in which the control names are displayed.POWERINDICATORUse this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you set OFF, it will go off.If you set ON at any time, the power indicator will automatically be turned on.WHITEBALANCEIf the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen.BUTTON SOUND To select or turn off the Buzzer sound.The Buzzer sound operates in below cases
ïè ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍMY KEY Setting1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 23 Select EXIT to leave the OSD menu. MY KEY DescriptionMY KEY SETTING MY KEY is short key. You can select one of FUNC. (PICTURE MODE, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature.Each option is explained below.
ïçÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍSUPER ENERGY SAVING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVINGbutton. 3 Enter to SUPER ENERGY SAVINGbutton.45 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.SUPER ENERGY SAVING DescriptionONEnables SUPER ENERGY SAVING you can save energy with this energy- efficient functionOFF Disables SUPER ENERGY SAVING.RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates. TOTAL POWER REDUCTION: How much power is saved while using the monitor.TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.SAVING DATA(W/h)584 mm (23 inch)686 mm(27 inch)SUPER SAVING7 W/h 8 W/hSaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.LG calculated these values by using “broadcast video signal”(including broadcast video: IEC 62087)SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.NOTE
îð ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ NOTEWhen monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode.DUAL DISPLAY1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY3 Enter to DUAL DISPLAY45 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.* Before using below functions, please install DUAL PACKAGE programme.Each option is explained below.DUAL DISPLAY DescriptionCLONE By selecting CLONE,user can use secondary monitor as done mode of primary monitor.EXTENDED By selecting EXTENDED,user can use secondary monitor as extended mode of primary monitor.OFF If select OFF,DUAL DISPLAY is off.DUAL WEB1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL WEB3 Enter to DUAL WEB45 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.* Before using below functions, please install DUAL PACKAGE programme.Each option is explained below.DUAL WEB DescriptionON Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. OFF If select OFF,DUAL WEB is off.
îïÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍEach option is explained below.MY KEY SETTING1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY SETTING3 Enter to MY KEY SETTINGbutton.45 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.MY KEY SETTING DescriptionPICTURE MODE PICTURE MODE adjust the Monitor set for the best picture appearance.SUPER ENERGY SAVING Enables SUPER ENERGY SAVING you can save energy with this energy-effcient function.DUAL DISPLAY User can use CLONE or EXTENDED in another monitor.DUAL WEB Help user to browse web efficiently by dividing in half and some other convenience in browsing dual pages.True Color Finder 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD.2 Select TRUE COLOR FINDERbutton. 3 Enter to TRUE COLOR FINDERbutton.45 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.Each option is explained below.TRUE COLOR FINDER DescriptionON Please buy a supported calibrator to use the True Color Finder function.Then, install the True Color Finder software provided with the product to calibrate the monitor.-Once calibrated, the monitor need to be turned off and turned back on to apply the calibrated value.In general, it is recommended to perform calibration once a month.-When the input port is changed, it is desirable to calibrate the monitor again.The supported calibrators are as follows: i1-Display3, ColorMunki Photo and ColorMunki Design from X-rite, and Spyder3 from DataColor.(More calibrators are to be supported in the near future.)OFF If it is set to OFF, the monitor gets back to the picture quality set before the calibration.
îî ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍTROUBLESHOOTINGCheck the following before calling for service.No image appearsIs the power cord of the display connected? Check and see if the power cord is connected properly to the power outlet.Is the power indicator light on? Press the Power button.Is the power on and the power indicator Red? Adjust the brightness and the contrast.Is the power indicator flickering? If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC.Do you see an "OUT OF RANGE" message on the screen? This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.Do you see a "NO SIGNAL" message on the screen? When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode.Do you see a "OSD LOCKED" message on the screen?Do you see “OSD LOCKED” when you push MENU button? You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.Display image is incorrectDisplay Position is incorrect. Press the AUTO button to automatically adjust your display image to the ideal setting.On the screen background, verticalbars or stripes are visible. Press the AUTO button to automatically adjust your display image to the ideal setting. Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO button to automatically adjust your display image to the ideal setting. Check and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).
îíÍÐÛÝ×Ú×ÝßÌ×ÑÒÍDisplay image is incorrectThe screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel Settings.The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?Have you installed the display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. Check and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.CAUTIONThe screen is flickering.Did you select the recommended resolution? If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.
îì ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍSPECIFICATIONS Display Screen Type 58.42 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 58.42 cmPixel Pitch 0.2652 mm x 0.2652 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. HDMIVideo Input Signal Input 15 pin D-SUB Connector / HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolutionMax D-SUB(Analog) : 1920 x 1080 @ 60 HzHDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,HDMI)Power ConsumptionOn Mode : 25 W(Typ.)Power Input 19 V 1.6 AAC-DC AdapterType ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONICor Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEOUTPUT: 19 V 1.7 ADimensions(Width x Height x Depth)With Stand 53.3 cm x 39.8 cm x 15.4 cm Without Stand 53.3 cm x 32.1 cm x 3.4 cm Weight 3.57 kg Tilt Range -5° to 20°EnvironmentalconditionsOperating TemperatureOperating Humidity10°C to 35 °C10 % to 80 % Storage TemperatureStorage Humidity-20°C to 60 °C 5 % to 90 % non-CondensingStand Base Attached ( ), Detached (O)Power cord Wall-outlet typeProduct specifications shown above may be changed without prior notice due to upgrade of product functions.IPS237L
îëÍÐÛÝ×Ú×ÝßÌ×ÑÒÍDisplay Screen Type 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 68.6 cmPixel Pitch 0.3114 mm x 0.3114 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. HDMIVideo Input Signal Input 15 pin D-SUB Connector / HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolutionMax D-SUB(Analog) : 1920 x 1080 @ 60 HzDVI / HDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,HDMI)Power ConsumptionOn Mode : 25 W(Typ.)Power Input 19 V 1.6 AAC-DC AdapterType ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONICor Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEOUTPUT: 19 V 1.7 ADimensions(Width x Height x Depth)With Stand 62.3 cm x 44.9 cm x 16.9 cm Without Stand 62.3 cm x 37.3 cm x 3.5 cm Weight 5.25 kg Tilt Range -5° to 20°EnvironmentalconditionsOperating TemperatureOperating Humidity10°C to 35 °C10 % to 80 % Storage TemperatureStorage Humidity-20°C to 60 °C 5 % to 90 % non-CondensingStand Base Attached ( ), Detached (O)Power cord Wall-outlet typeProduct specifications shown above may be changed without prior notice due to upgrade of product functions.IPS277L
îê ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍPreset Modes (Resolution)Display Modes (Resolution) Horizontal Frequency(kHz)Vertical Frequency(Hz) Polarity(H/V)720 x 400 31.468 70 -/+640 x 480 31.469 60 -/-640 x 480 37.500 75 -/-800 x 600 37.879 60 +/+800 x 600 46.875 75 +/+1024 x 768 48.363 60 -/-1024 x 768 60.023 75 +/+1152 x 864 67.500 75 +/+1280 x 1024 63.981 60 +/+1280 x 1024 79.976 75 +/+1680 x 1050 65.290 60 -/+1920 x 1080 67.500 60 +/+ Recommend ModeHDMI TIMINGDisplay Modes (Resolution)Horizontal Frequency(kHz)Vertical Frequency(Hz)480P 31.50 60576P 31.25 50720P 37.50 50720P 45.00 601080i 28.12 501080i 33.75 601080P 56.25 501080P 67.50 60 Recommend ModeIndicatorMode LED ColorOn Mode RedSleep Mode Blinking RedOff Mode OffIPS237L/IPS277L
îéÐÎÑÐÛÎ ÐÑÍÌËÎÛProper posture for using the Monitor set.PROPER POSTUREAdjust the Monitor set and your posture to allow you to view images at the optimal viewing angle.Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.Adjust the location of the Monitor set to avoid it reflecting light.
îè Ô×ÝÛÒÍÛÍLICENSESSupported licenses may differ by model. For more information of the licenses, visit www.lg.com.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Ó¿µ» -«®» ¬± ®»¿¼ ¬¸» Í¿º»¬§ Ю»½¿«¬·±²- ¾»º±®» «-·²¹ ¬¸» °®±¼«½¬òÕ»»° ¬¸» Ñ©²»®Ž- Ó¿²«¿´ øÝÜ÷ ·² ¿² ¿½½»--·¾´» °´¿½» º±® º«¬«®» ®»º»®»²½»ò̸» ³±¼»´ ¿²¼ -»®·¿´ ²«³¾»® ±º ¬¸» ÍÛÌ ·- ´±½¿¬»¼ ±² ¬¸» ¾¿½µ ¿²¼ ±²» -·¼» ±º ¬¸» ÍÛÌò λ½±®¼ ·¬ ¾»´±© -¸±«´¼ §±« »ª»® ²»»¼ -»®ª·½»òß- ¿² ÛÒÛÎÙÇ ÍÌßΠﮬ²»® ÔÙÛ Ëò Íò ßòôײ½ò ¸¿- ¼»¬»®³·²»¼ ¬¸¿¬ ¬¸·- °®±¼«½¬ ³»»¬- ¬¸» ÛÒÛÎÙÇ ÍÌßÎ ÛÒÛÎÙÇ ÍÌßÎ ·- ¿ -»¬ ±º °±©»®ó-¿ª·²¹¹«·¼»´·²»- ·--«»¼ ¾§ ¬¸» ËòÍòÛ²ª·®±²³»²¬¿´Ð®±¬»½¬·±² ß¹»²½§øÛÐß÷òÓÑÜÛÔÍÛÎ×ßÔ

Navigation menu