LG Electronics USA IPS237LY Part15 Subpart B-LCD Monitor User Manual IPS227 277L ENG 1 6A
LG Electronics USA Part15 Subpart B-LCD Monitor IPS227 277L ENG 1 6A
Contents
- 1. BEJIPS237LY_User Manual 1
- 2. BEJIPS237LY_User Manual 2
BEJIPS237LY_User Manual 2
ÑÉÒÛÎŽÍ ÓßÒËßÔ ×ÐÍ ÔÛÜ ÓÑÒ×ÌÑΠд»¿-» ®»¿¼ ¬¸·- ³¿²«¿´ ½¿®»º«´´§ ¾»º±®» ±°»®¿¬·²¹ §±«® -»¬ ¿²¼ ®»¬¿·² ·¬ º±® º«¬«®» ®»º»®»²½»ò ×ÐÍ ÔÛÜ ÓÑÒ×ÌÑÎ ÓÑÜÛÔ ×ÐÍîíéÔ ×ÐÍîééÔ ©©©ò´¹ò½±³ î ÌßÞÔÛ ÑÚ ÝÑÒÌÛÒÌÍ CONTENTS ASSEMBLING AND PREPARING 24 SPECIFICATIONS Unpacking 24 IPS237L Parts and buttons 25 IPS277L Setting up the Monitor set 26 Preset Modes (Resolution) - Attaching the Stand Base 26 Indicator - Detaching the Stand - Mounting on a table - Using the cable holder 27 PROPER POSTURE - Mounting on a wall 27 Proper posture for using the Monitor set. 10 USING THE MONITOR SET 28 LICENSES 10 Connecting to a PC 10 - D-SUB connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 13 Customizing Settings 13 - Menu Settings 14 - PICTURE 15 - COLOR 16 - DISPLAY 16 - VOLUME 17 - OTHERS 18 MY KEY Setting 19 - SUPER ENERGY SAVING 20 - DUAL DISPLAY 20 - DUAL WEB 21 - True Color Finder 21 - MY KEY SETTING 22 TROUBLESHOOTING ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ í ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) DVI-D Cable (This cable is not included in all countries.) or Power Cord AC-DC Adapter ( Depending on the country ) Stand Body Stand Base AC-DC Adapter ( Depending on the country ) Two Screws CAUTION Do not use any unapproved accessories to ensure the safety and product life span. Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE The accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ì ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10) ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ Setting up the Monitor set ë 3 Secure the monitor and the ͬ¿²¼ Þ±¼§ with the 2 screws. Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the ͬ¿²¼ Þ±¼§ from the monitor. Insert the two Lockers of the Stand Body right into the groove of the monitor head and secure them by pressing the left and right bottom sides. WARNING If you don`t fasten the screw tightly, monitor will fall down and get damaged. 4 Attach the ͬ¿²¼ Þ¿-» from the ͬ¿²¼ Þ±¼§ by turning the screw to the right with a ݱ·². Locker ÝßËÌ×ÑÒ Tighten the screws firmly to prevent the monitor from tilting forward. Do not over tighten. ê ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ Detaching the Stand Mounting on a table 1 Place the monitor with the screen side down on 1 Lift and tilt the Monitor set into its upright a flat and cushioned surface. position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Turn the screw to the left, and then pull out the ͬ¿²¼ Þ¿-» from the ͬ¿²¼ Þ±¼§. 10 cm 10 cm 10 cm 10 cm 3 Remove 2 screws and pull out the ͬ¿²¼ Þ±¼§ from the monitor. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. or ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ 3 Press (Power) button on the bottom switch Using the cable holder panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Cable holder é è ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ WARNING Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear ßÍÍÛÓÞÔ×ÒÙ ßÒÜ ÐÎÛÐßÎ×ÒÙ Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. VESA (A x B) Standard screw Number of screws 75 x 75 M4 CAUTION ïð ½³ ïð ½³ ïð ½³ ïð ½³ If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. 784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm Length 10 mm 787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE Use the screws that are listed on the VESA standard screw specifications. The wall mount kit will include an installation manual and necessary parts. The wall mount bracket is optional. You can obtain additional accessories from your local dealer. The length of screws may differ depending on the wall mount. Be sure to use the proper length. For more information, refer to the instructions supplied with the wall mount. ç ïð ËÍ×ÒÙ ÌØÛ ÓÑÒ×ÌÑÎ ÍÛÌ USING THE MONITOR SET Connecting to a PC Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. NOTE If you use HDMI PC, it can cause compatibility problem. NOTE When using a D-Sub signal input cable connector for Macintosh Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. ËÍ×ÒÙ ÌØÛ ÓÑÒ×ÌÑÎ ÍÛÌ CAUTION Connect the signal input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal. ïï Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) NOTE "Self Image Setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) ‘AUTO’ Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) ïî ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ CUSTOMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. ÓÛÒË ÓÇ ÕÛÇ ÚËÒÝò ßËÌÑ ×ÒÐËÌ ÛÈ×Ì Monitor set Buttons Button Description Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter MY KEY menu.For more information.(See p.18) Use this button to enter PICTURE MODE, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB,MY KEY SETTING menus.(See p.18) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 You can choose the input signal. HDMI) you want. D-SUB. EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ ïí Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU Analog Digital HDMI BRIGHTNESS Description To adjust the brightness, contrast of the screen CONTRAST WIDE/ORIGINAL WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). Restore all factory default settings. Press the immediately. RESET MENU > NEXT MENU PICTURE Analog Digital HDMI buttons to reset Description SHARPNESS To adjust the clearness of the screen . BLACK LEVEL To set offset level OVER SCAN To improve the clarity and stability of the screen RESPONSE TIME COLOR GAMMA COLOR TEMP SIX COLOR To customize the color of the screen COLOR RESET DISPLAY HORIZONTAL VERTICAL CLOCK PHASE VOLUME OTHERS To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume LANGUAGE POWER INDICATOR WHITE BALANCE Analog: D-SUB(Analog signal) input. Digital: DVI-D(Digital signal) input. HDMI: HDMI(Digital signal) input. To customize the screen status for a user's operating environment ïì ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > PICTURE Description SHARPNESS To adjust the clearness of the screen. BLACK LEVEL You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’, the screen will be dark.(only for HDMI input) * Offset?As the criteria for video signal, it is the darkest screen the monitor can show. OVER SCAN To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment. RESPONSE TIME If you set FAST, you enable the Response Time Control function. If you set NORMAL, you disenable the Response Time Control function. ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ ïë COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR 4 Enter to COLOR buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > COLOR Description GAMMA Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images. COLOR TEMP CUSTOM Set your own red color levels. Set your own green color levels. Set your own blue color levels. Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue). SIX COLOR COLOR RESET Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/ CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user. HUE Adjusts the screen hue. SATURATION Adjusts the color sharpness on the screen. Lower values make the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark. Resets the color settings to the factory default settings for the current input device. ïê ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ DISPLAY 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY 4 Enter to DISPLAY buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > DISPLAY Description HORIZONTAL To move image left and right. VERTICAL To move image up and down. CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. VOLUME 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select VOLUME 4 Enter to VOLUME 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > VOLUME VOLUME Description To adjust the volume of headphone/earphone.(Only for HDMI input) ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ ïé OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select OTHERS 4 Enter to OTHERS buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > OTHERS Description LANGUAGE To choose the language in which the control names are displayed. POWER INDICATOR Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. WHITE BALANCE If the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen. BUTTON SOUND To select or turn off the Buzzer sound. The Buzzer sound operates in below cases ïè ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ MY KEY Setting 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 3 Select EXIT to leave the OSD menu. Each option is explained below. MY KEY MY KEY SETTING Description MY KEY is short key. You can select one of FUNC. (PICTURE MODE, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature. ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ ïç SUPER ENERGY SAVING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING button. 3 Enter to SUPER ENERGY SAVING button. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ) button. Each option is explained below. SUPER ENERGY SAVING Description ON Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function OFF Disables SUPER ENERGY SAVING. RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. SAVING DATA(W/h) SUPER SAVING 584 mm (23 inch) 686 mm (27 inch) 7 W/h 8 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. îð ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ * Before using below functions, please install DUAL PACKAGE programme. DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY 3 Enter to DUAL DISPLAY 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. DUAL DISPLAY Description CLONE By selecting CLONE,user can use secondary monitor as done mode of primary monitor. EXTENDED By selecting EXTENDED,user can use secondary monitor as extended mode of primary monitor. OFF If select OFF,DUAL DISPLAY is off. * Before using below functions, please install DUAL PACKAGE programme. DUAL WEB 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL WEB 3 Enter to DUAL WEB 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. DUAL WEB Description ON Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. OFF If select OFF,DUAL WEB is off. NOTE When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode. ÝËÍÌÑÓ×Æ×ÒÙ ÍÛÌÌ×ÒÙÍ îï True Color Finder 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select TRUE COLOR FINDER button. 3 Enter to TRUE COLOR FINDER button. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. TRUE COLOR FINDER ON Description Please buy a supported calibrator to use the True Color Finder function. Then, install the True Color Finder software provided with the product to calibrate the monitor. -Once calibrated, the monitor need to be turned off and turned back on to apply the calibrated value. In general, it is recommended to perform calibration once a month. -When the input port is changed, it is desirable to calibrate the monitor again. The supported calibrators are as follows: i1-Display3, ColorMunki Photo and ColorMunki Design from X-rite, and Spyder3 from DataColor. (More calibrators are to be supported in the near future.) OFF If it is set to OFF, the monitor gets back to the picture quality set before the calibration. MY KEY SETTING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY SETTING 3 Enter to MY KEY SETTING button. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MY KEY SETTING Description PICTURE MODE PICTURE MODE adjust the Monitor set for the best picture appearance. SUPER ENERGY SAVING Enables SUPER ENERGY SAVING you can save energy with this energy-effcient function. DUAL DISPLAY User can use CLONE or EXTENDED in another monitor. DUAL WEB Help user to browse web efficiently by dividing in half and some other convenience in browsing dual pages. îî ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Check and see if the power cord is connected properly to the power outlet. Press the Power button. Is the power on and the power indicator Red? Adjust the brightness and the contrast. Is the power indicator flickering? If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. Do you see an "OUT OF RANGE" message on the screen? This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode. Do you see a "NO SIGNAL" message on the screen? Do you see a "OSD LOCKED" message on the screen? Do you see “OSD LOCKED” when you push MENU button? You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Display image is incorrect Display Position is incorrect. Press the AUTO button to automatically adjust your display image to the ideal setting. On the screen background, vertical bars or stripes are visible. Press the AUTO button to automatically adjust your display image to the ideal setting. Press the AUTO button to automatically adjust your display image to the ideal setting. Check and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Any horizontal noise appearing in any image or characters are not clearly portrayed. ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ îí CAUTION Check and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or abnormal. The screen blinks. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel Settings. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. The screen is flickering. Did you select the recommended resolution? If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P. îì ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ SPECIFICATIONS IPS237L Display Screen Type 58.42 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58.42 cm Pixel Pitch 0.2652 mm x 0.2652 mm (Pixel Pitch) Horizontal Frequency Vertical Frequency 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Video Input Input Form Signal Input Separate Sync. HDMI 15 pin D-SUB Connector / HDMI Connector Resolution Input Form Max RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug & Play Recommend DDC 2B(Analog,HDMI) Sync Input Power Consumption On Mode : 25 W(Typ.) Power Input AC-DC Adapter 19 V 1.6 A Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) OUTPUT: 19 V With Stand 1.7 A Without Stand 53.3 cm x 39.8 cm x 15.4 cm 53.3 cm x 32.1 cm x 3.4 cm Weight 3.57 kg Tilt Range -5° to 20° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity Stand Base Power cord -20°C to 60 °C 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ îë IPS277L Display Screen Type 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 68.6 cm Pixel Pitch 0.3114 mm x 0.3114 mm (Pixel Pitch) Horizontal Frequency Vertical Frequency 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Video Input Input Form Signal Input Separate Sync. HDMI 15 pin D-SUB Connector / HDMI Connector Resolution Input Form Max RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug & Play Recommend DDC 2B(Analog,HDMI) Sync Input Power Consumption On Mode : 25 W(Typ.) Power Input AC-DC Adapter 19 V 1.6 A Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) OUTPUT: 19 V With Stand 1.7 A Without Stand 62.3 cm x 44.9 cm x 16.9 cm 62.3 cm x 37.3 cm x 3.5 cm Weight 5.25 kg Tilt Range -5° to 20° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity Stand Base Power cord -20°C to 60 °C 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. îê ÍÐÛÝ×Ú×ÝßÌ×ÑÒÍ Preset Modes (Resolution) IPS237L/IPS277L Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.500 60 +/+ Recommend Mode HDMI TIMING Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 480P 31.50 60 576P 31.25 50 720P 37.50 50 720P 45.00 60 1080i 28.12 50 1080i 33.75 60 1080P 56.25 50 1080P 67.50 60 Indicator Mode LED Color On Mode Red Sleep Mode Blinking Red Off Mode Off Recommend Mode ÐÎÑÐÛÎ ÐÑÍÌËÎÛ îé PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light. îè Ô×ÝÛÒÍÛÍ LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Ó¿µ» -«®» ¬± ®»¿¼ ¬¸» Í¿º»¬§ Ю»½¿«¬·±²- ¾»º±®» «-·²¹ ¬¸» °®±¼«½¬ò Õ»»° ¬¸» Ñ©²»®Ž- Ó¿²«¿´ øÝÜ÷ ·² ¿² ¿½½»--·¾´» °´¿½» º±® º«¬«®» ®»º»®»²½»ò ̸» ³±¼»´ ¿²¼ -»®·¿´ ²«³¾»® ±º ¬¸» ÍÛÌ ·´±½¿¬»¼ ±² ¬¸» ¾¿½µ ¿²¼ ±²» -·¼» ±º ¬¸» ÍÛÌò λ½±®¼ ·¬ ¾»´±© -¸±«´¼ §±« »ª»® ²»»¼ -»®ª·½»ò ÓÑÜÛÔ ÍÛÎ×ßÔ ÛÒÛÎÙÇ ÍÌßÎ ·- ¿ -»¬ ±º °±©»®ó-¿ª·²¹ ¹«·¼»´·²»- ·--«»¼ ¾§ ¬¸» ËòÍòÛ²ª·®±²³»²¬¿´ Ю±¬»½¬·±² ß¹»²½§øÛÐß÷ò ß- ¿² ÛÒÛÎÙÇ ÍÌßΠﮬ²»® ÔÙÛ Ëò Íò ßòôײ½ò ¸¿- ¼»¬»®³·²»¼ ¬¸¿¬ ¬¸·°®±¼«½¬ ³»»¬- ¬¸» ÛÒÛÎÙÇ ÍÌßÎ
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Title : IPS227_277L_ENG(1.6A).pdf Author : tongsuo.yao Creator : pdfFactory Pro www.fineprint.cn Producer : pdfFactory Pro 3.52 (Windows XP Professional Chinese) Create Date : 2012:05:10 10:18:08+08:00 Page Count : 29EXIF Metadata provided by EXIF.tools