LG Electronics USA KF300D Cellular/PCS GSM Phone with Bluetooth User Manual KF300 ENG 1019

LG Electronics USA Cellular/PCS GSM Phone with Bluetooth KF300 ENG 1019

UserManual.wiki >

LG Electronics USA >

KF300D User Manual HTML Version

Users Manual

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. "

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. if this

equipment does cause harmful interference or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY STATEMENT

1. WHAT THIS WARRANTY COVERS:

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be

free from defects in material and workmanship, according to the following terms and conditions:

(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase

of the product.

(2) The limited warranty extends on to the original purchaser of the product and is not assignable or

transferable to any subsequent purchaser/end user.

(3) This warranty is good only to the original purchaser of the product during the warranty period as

long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.

(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.

(5) Upon request from LG, the consumer must provide information to reasonably prove the date of

purchase.

(6) The customer shall bear the cost of shipping the product to the Customer Service Department of

LG. LG shall bear the cost of shipping the product back to the consumer after the completion of

service under this limited warranty.

2. WHAT THIS WARRANTY DOES NOT COVER:

(1) Defects or damages resulting from use of the product in other than its normal and customary

manner.

(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to

moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair,

misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the

fault of LG, including damage caused by shipping blown fuses spills of food or liquid.

(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.

(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect

or malfunction of the product during the applicable limited warranty period.

(5) Products which have had the serial number removed or made illegible.

(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by

operations law, statutory or otherwise, including, but limited to any implied warranty of

marketability or fitness for a particular use.

(7) Damage resulting from use of non-LG approved accessories.

(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to

normal customer use.

(9) Products operated outside published maximum ratings.

(10) Products used or obtained in a rental program.

(11) Consumables (such as fuses).

3. STATE LAW RIGHTS:

No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED

TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL

NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS

OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF,

OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY

APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental

or consequential damages or limitations on how long an implied warranty lasts; so these limitations or

exclusions may not apply to you. This warranty gives you specific legal rights and you may also have

other rights which vary from state to state.

4. HOW TO GET WARRANTY SERVICE:

To obtain warranty service, please call the following web address:

www.lgeservice.com

For Your Safety

Important Information

This user guide contains important information on the use and

operation of this phone. Please read all the information

carefully for optimal performance and to prevent any damage

to or misuse of the phone. Any changes or modifications not

expressly approved in this user guide could void your warranty

for this equipment.

Before You Start

Safety Instructions

WARNING! To reduce the possibility of electric shock, do not

expose your phone to high humidity areas, such as the

bathroom, swimming pool, etc.

Always store your phone away from heat. Never store your

phone in settings that may expose it to temperatures less than

32°F or greater than 104°F, such as outside during extreme

weather conditions or in your car on a hot day. Exposure to

excessive cold or heat will result in malfunction, damage

and/or catastrophic failure.

Be careful when using your phone near other electronic

devices. RF emissions from your mobile phone may affect

nearby in adequately shielded electronic equipment. You

should consult with manufacturers of any personal medical

devices such as pacemakers and hearing aides to determine if

they are susceptible to interference from your mobile phone.

Turn off your phone in a medical facility or at a gas station.

Never place your phone in a microwave oven as this will

cause the battery to explode.

IMPORTANT! Please read the TIA SAFETY INFORMATION on

page 78 before using your phone.

Safety Information

Read these simple guidelines. Breaking the rules may be

dangerous or illegal. Further detailed information is given in this

user guide.

]Never use an unapproved battery since this could damage

the phone and/or battery and could cause the battery to

explode.

]Never place your phone in a microwave oven as it will

cause the battery to explode.

]Do not dispose of your battery by fire or with hazardous or

flammable materials.

]Make sure that no sharp-edged items come into contact

with the battery. There is a risk of this causing a fire.

]Store the battery in a place out of reach of children.

]Be careful that children do not swallow any parts such as

rubber plugs (earphone, connection parts of the phone,

etc.). This could cause asphyxiation or suffocation.

For Your Safety

]Unplug the power cord and charger during lightning storms

to avoid electric shock or fire.

]When riding in a car, do not leave your phone or set up the

hands-free kit near to the air bag. If wireless equipment is

improperly installed and the air bag is activated, you may be

seriously injured.

]Do not use a hand-held phone while driving.

]Do not use the phone in areas where its use is prohibited.

(For example: aircraft).

]Do not expose the battery charger or adapter to direct

sunlight or use it in places with high humidity, such as a

bathroom.

]Never store your phone in temperatures less than- 4°F or

greater than 122°F.

]Do not use harsh chemicals (such as alcohol, benzene,

thinners, etc.) or detergents to clean your phone. There is a

risk of this causing a fire.

]Do not drop, strike, or shake your phone severely. Such

actions may harm the internal circuit boards of the phone.

]Do not use your phone in high explosive areas as the phone

may generate sparks.

]Do not damage the power cord by bending, twisting, pulling,

or heating. Do not use the plug if it is loose as it may cause

a fire or electric shock.

]Do not place any heavy items on the power cord. Do not

allow the power cord to be crimped as it may cause fire or

electric shock.

]Do not handle the phone with wet hands while it is being

charged. It may cause an electric shock or seriously

damage your phone.

]Do not disassemble the phone.

]Do not place or answer calls while charging the phone as it

may short-circuit the phone and/or cause electric shock or

fire.

]Only use the batteries, antennas, and chargers provided by

LG. The warranty will not be applied to products provided by

other suppliers.

]Only authorized personnel should service the phone and its

accessories. Faulty installation or service may result in

accidents and consequently invalidate the warranty.

]Do not hold or let the antenna come in contact with your

body during a call.

]An emergency call can be made only within a service area.

For an emergency call, make sure that you are within a

service area and that the phone is turned on.

For Your Safety

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications (FCC) of he United

States, with its action in Report and Order FCC 96-326, adopted

an updated safety standard for human exposure to radio

frequency (RF) electromagnetic energy emitted by FCC

regulated transmitters. Those guidelines are consistent with

the safety standard previously set by both U.S. and

international standards bodies.

The design of this phone complies with the FCC guidelines and

these international standards.

CAUTION

Use only the supplied and approved antenna. Use of

unauthorized antennas or modifications could impair call

quality, damage the phone, void your warranty and/or result in

violation of FCC regulations. Do not use the phone with a

damaged antenna. If a damaged antenna comes into contact

with skin, a minor burn may result. Contact your local dealer

for a replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with

the back of the phone kept 0.79 inches (2cm) between the

user’s body and the back of the phone. To comply with FCC RF

exposure requirements, a minimum separation distance of 0.79

inches(2cm) must be maintained between the user's body

and the back of the phone. Third-party belt-clips, holsters, and

similar accessories containing metallic components should not

be used. Body-worn accessories that cannot maintain 0.79

inches(2cm) separation distance between the user's body

and the back of the phone, and have not been tested for typical

body-worn operations may not comply with FCC RF exposure

limits and should be avoided.

For Your Safety

Vehicle Mounted External Antenna

(optional, if available)

A minimum separation distance of 8 inches (20cm) must be

maintained between the user/bystander and the vehicle

mounted external antenna to satisfy FCC RF exposure

requirements. For more information about RF exposure, visit

the FCC website at www.fcc.gov

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC

rules. Operation is subject to the following two conditions:

(1) This device and its accessories may not cause harmful

interference, and (2) this device and its accessories must

accept any interference received, including interference that

may cause undesired operation.

Cautions for Battery

]Do not disassemble.

]Do not short-circuit.

]Do not expose to high temperature: 60°C (140°F).]

]Do not incinerate.

Battery Disposal

]Please dispose of your battery properly or bring to your

local wireless carrier for recycling.

]Do not dispose in fire or with hazardous or flammable

materials.

Adapter (Charger) Cautions

]Using the wrong battery charger could damage your phone

and void your warranty.

]The adapter or battery charger is intended for indoor use

only.

Do not expose the adapter or battery charger to direct sunlight

or use it in places with high humidity, such as the bathroom.

The menu in this phone can be displayed in 2 ways. One is by list type or

secondly in grid format. Please note that menu number options are different in

each view. The default setting on the phone is set to show the menu in list

type, so therefore all the menu number selections throughout the manual are

shown according to that setting. The following illustration shows the available

menu structure and indicates the:

]Number assigned to each menu option.

]Page where you can find the feature description.

You can go to the desired menu using the left soft key [Menu], navigation keys

and the [OK] key. And you can also take a shortcut by pressing the

corresponding number key of desired menu after pressing the left soft key

[Menu].

Menu Tree

1.1 All calls

1.2 Missed calls

1.3 Last received calls

1.4 Sent calls

1.5 Call settings

1.6 Calls time

1.7 Data information

1. Calls

2.1 Downloads

2.2 Games&Apps

2.Downloads

Menu Tree

3.1 simservice

3.2 Tones&Images

3.3 Phonebook

3.4 Messages

3.5 Entertainment

3.6 WAP

3.7 Extras

3.8 Voice Mail

3.9 Settings

3.0 Help

4.1Tones&Images

4.2 Videos

4.3 Sounds

4.4 Images

4.5 Others

4.6 Memory status

3. Sim service

4.Tones&Images

5.1 Search

5.2 New contact

5.3 Speed dials

5.4 Gouprs

5.5 Copy all

5.6 Delete all

5.7 Settings

5.8 Information

5. Phonebook

Menu Tree

6.1New message

6.2 Received messages

6.3 E-mail box

6.4 Sent messages

6.5 Voice Mail

6.6 Messenger

6.7 VIVO Chat

6.8 Templates

6.9 Drafts

6.0 Outbox

6.* Info message

6.# Message settings

7.1 Games

7.2 Voice portal

7.3 VIVO Informe

6.Messages

7. Entertainment

8.1 Home

8.2 Preferred links

8.3 Quiz

8.4 Cupido

8.5 Tones&Images

8.6 Guides&Leisure

8.7 Portals

8.8 Sports

8.9 Games

8.WAP

Menu Tree

9.1 MP3 player

9.2 amera

9.3 Video camera

9.4 Voice notes

9.5 Calendar

9.6 Alarm

9.7 Memo

9.8 To do

9.9 Calculator

9.0 Chronometer

9.* World time

9.# FM radio

9. Extras

0.1 Phone settings

0.2 Sound profiles

0.3 Display settings

0.4 Shortcuts

0.5 Connectivity

0.6 Security settings

0.7 Call settings

0.8 Message settings

0.9 WAP settings

0.0 Original settings

0.*Memory status

*.1 Voice Mail

*.2 Settings

*.3 Help

0. Settings

*. Voice Mail

Menu Tree

#.1 Customer Care Center

#.2 Internatinal roaming

#.3 Phone info

#.4 Icon glossary

#. Help

You can check the record of missed,

received, and dialled calls only if the

network supports the Calling Line

Identification (CLI) within the service

area.

The number and name (if available)

are displayed together with the date

and time at which the call was

made. You can also view call times.

All calls Menu 1.1

You can view all lists of outgoing or

incoming calls.

Missed calls Menu 1.2

This option lets you view the last 50

unanswered calls. You can also:

]View the number if available and

call it, or save it in the Address

Book

]Enter a new name for the number

and save both in the Address

Book

]Send a message by this number

]Delete the call from the list

Last received calls

Menu 1.3

This option lets you view the last 50

incoming calls. You can also:

]View the number if available and

call it or save it in the Address

Book

]Enter new name for the number

and save both in the Address

Book

]Send a message by this number

]Delete the call from the list

Calls

Sent calls Menu 1.4

This option lets you view the last 50

outgoing calls (called or attempted).

You can also:

]View the number if available and

call it or save it in the Address

Book

]Enter new name for the number

and save both in the Address

Book

]Send a message by this number

]Delete the call from the list

Call settings Menu 1.5

You can set the menu relevant to a

call by pressing [Select] in the

Setting menu.

Call divert (Menu 1.5.1)

The Call divert service allows you to

divert incoming voice calls, fax calls,

and data calls to another number.

For details, contact your service

provider.

]All voice calls

Diverts voice calls

unconditionally.

]If busy

Diverts voice calls when the

phone is in use.

]If no reply

Diverts voice calls which you do

not answer.

]If out of reach

Diverts voice calls when the

phone is switched off or out of

coverage.

]All data calls

Diverts to a number with a PC

connection unconditionally.

Calls

]All fax calls

Diverts to a number with a fax

connection unconditionally.

]Cancel all

Cancels all call divert service.

The submenus

Call divert menus have the

submenus shown below.

- Activate

Activate the corresponding

service.

To voice mailbox

Forwards to message centre. This

function is not shown at All data

calls and All fax calls menus.

To other number

Inputs the number for diverting.

To favourite number

You can check recent 5 diverted

numbers.

- Cancel

Deactivate the corresponding

service.

- View status

View the status of the

corresponding service.

Answer mode (Menu 1.5.2)

]Slide open

If you select this menu, you can

receive an incoming call when

you open the slide.

]Any key

If you select this menu, you can

receive a call by pressing any key

except [End] key.

]Accept key only

If you select this menu, you can

receive a call by only pressing

[Send] key.

Calls

Send my number (Menu 1.5.3)

(network and subscription dependent)

]Set by network

If you select this, you can send

your phone number depending on

two line service such as line 1 or

line 2.

]On

You can send your phone number

to another party.

Your phone number will be shown

on the receiver’s phone.

]Off

Your phone number will not be

shown.

Call waiting (Menu 1.5.4)

(network dependent)

]Activate

If you select Activate, you can

accept a waiting (receiving) call.

]Cancel

If you select Cancel, you cannot

recognize the waiting (receiving)

call.

]View status

Shows the status of Call waiting.

Minute minder (Menu 1.5.5)

If you select On, you can check the

call duration by a beep sound given

every minute during a call.

Auto redial (Menu 1.5.6)

]On

When this function is activated,

the phone will automatically try to

redial in the case of failure to

connect a call.

]Off

Your phone will not make any

attempts to redial when the

original call has not connected.

Calls

Send DTMF tones (Menu 1.5.7)

You can send touch tones during an

active call to control your voice

mailbox or other automated phone

services.

Calls time Menu 1.6

Allows you to view the duration of

your incoming and outgoing calls.

You can also reset the call times.

The following timers are available:

]Last call: Length of the last call.

]Dialled calls: Length of the

outgoing calls.

]Received calls: Length of the

incoming calls.

]All calls: Total length of all calls

made and incoming calls since

the timer was last reset.

Data information Menu 1.7

You can check the amount of data

transferred over the network

through the GPRS information

option.

In addition, you can also view how

much time you are online.

Web data (Menu 1.7.1)

Data call (Menu 1.7.2)

Total data (Menu 1.7.3)

Downloads

Downloads Menu 2.1

Games&Apps Menu 2.2

In this menu, you can manage the

Java applications installed in your

phone. You can play or delete

downloaded applications, or set the

connect option.

Sim service

simservice Menu 3.1

Tones&Images Menu 3.2

Phonebook Menu 3.3

Messages Menu 3.4

Entertainment Menu 3.5

Games (Menu 3.5.1)

Voice portal (Menu 3.5.2)

VIVO Infoma (Menu 3.5.3)

WAP Menu 3.6

Extras Menu 3.7

Voice Mail Menu 3.8

Once this menu has been selected,

simply press the left soft key

[OK] to listen to voice mail. You can

also hold down the key in

standby mode to listen to voice mail.

Note

]When you receive a voice

mail, your phone displays

the icon and you hear an

alert. Please check with

your network provider for

details of their service in

order to configure the

handset correctly.

Sim service

Settings Menu 3.9

You can set the profile, cache and

security related to internet service.

Network profile (Menu 3.9.1)

A profile is the network information

used to connect to the Internet.

There are default profiles for some

operators, stored in phone memory.

It’s impossible to rename default

profiles.

Each profile has submenus as

follows:

]Activate: Activates the selected

profile.

]View: You can see the selected

profile.

]Edit: You can edit the selected

profile.

]New profile: You can add a new

profile.

]Delete: Deletes the selected

profile from the list.

]Delete all: Deletes all profile

from the list.

]Reset all: Allows you to reset all

profiles.

View style (Menu 3.9.2)

Cache (Menu 3.9.3)

The information or services you have

accessed are saved in the cache

memory of the phone.

Note

]A cache is a buffer

memory, which is used to

save data temporarily.

Cookie (Menu 3.9.4)

Check whether a cookie is used or

not.

Security certifications

(Menu 3.9.5)

You can see the list of personal.

Certificates that have been stored in

your phone.

Show image (Menu 3.9.6)

Javascript (Menu 53.9.7)

Memory in use (Menu 3.9.8)

Help Menu 3.0

Sound profiles (Menu 3.0.1)

In Profiles, you can adjust and

customise the phone tones for

different events, environments, or

caller groups.

There are five preset profiles:

General, Silent, Vibrate only,

Outdoor and Headset.

Each profile can be personalised.

Press the left soft key [Menu] and

select Profiles using up/down

navigation keys.

Activate (Menu 3.X.1)

1. A list of profiles is displayed.

2. In the Profiles list, scroll to the

profile you want to activate and

press the left soft key [OK] or

OK key.

Sim service

3. Then, select Activate.

Personalise (Menu 3.X.2)

Scroll to the desired profile in the

Profile list. After pressing the left

soft key or the OK key, select

Personalise.

The profile setting option opens. Set

the option as required.

]Call alert type: Set the alert type

for incoming calls.

]Ring tones: Select the desired

ring tone from the list.

]Ring volume: Set the volume of

the ringing tone.

]Message alert type: Set the

alert type for messages.

]Message tones: Select the alert

tone for messages.

]Keypad tones: Select the

desired keypad tone.

]Keypad volume: Set the volume

of keypad tone.

]Slide tones: Allows to set the

flip tone for adjusting

environment.

]Effect sound volume: Set the

volume of effect sound.

]Power on/off volume: Set the

volume of the ringing tone when

switching the phone on/off.

]Auto answer: This function will

be activated only when your

phone is connected to the

handsfree kit.

• Off: The phone will not answer

automatically.

• After 5 secs: After 5 seconds,

the phone will answer

automatically.

• After 10 secs: After 10

seconds, the phone will answer

automatically.

Display settings (Menu 3.0.2)

]Wallpaper: You can select the

background pictures in standby

mode.

]Backlight timer: You can set the

light-up duration of the display.

(Off/10 secs/20 secs/30 secs/60

secs)

]Brightness: You can set the

brightness of LCD: 100%, 80%,

60%, 40%

]Home screen shortcut:

Selecting On displays the

functionalities of 4 Navigation

keys and Menu key as pictures on

the middle of the idle window.

(Profiles/Messaging/

Favourites/Contacts)

]Theme:

]Menu style: Your phone

provides you with Grid and List

menu themes. Set the menu style

by scrolling and pressing the left

soft key [OK].

]Main font style

]Dialing font style: Your phone

provides you with four dialing

styles. (Color style/Beads

style/Digital style/Sketchbook

style)

]Standby text: If you select On,

you can edit the text which is

displayed in standby mode.

]Network name: If this function

is activated, network name will

be displayed on LCD.

]Touchpaf calibration:

Note

]All profiles cannot be

renamed.

Sim service

Connectivity (Menu 3.0.3)

]Bluetooth: Bluetooth enables

compatible mobile devices,

peripherals and computers that

are in close proximity to

communicate directly with each

other without wires. This handset

supports built-in Bluetooth

connectivity, which makes it

possible to connect them with

compatible Bluetooth headsets,

computer applications and so on.

]When you receive data

from another Bluetooth

device, the phone requests

confirmation. After

confirming the transfer, the

file will be copied on to

your phone.

]Depending on the file type,

it will be stored in the

following folders:

- Video (.3gp, mp4):Videos

folder

- Image (.bmp, gif, jpg,

png):Images folder

- Sound (.amr, wav, aac):

Sounds folder

- MP3 (.mp3):Sounds/MP3

folder

- Other files (.txt, html):

Others folder

Note

]If you use LG PC Sync via

Bluetooth, you can

exchange the data only

within phonebook

Sim service

• Bluetooth on/off

You can activate or cancel the

Bluetooth function.

• Device list

You can view all devices which

your KE970 is already paired to.

If you enter Paired devices, you

access the options

- Connect / Disconnect: After

pairing with headset or stereo

headset, you should connect

with those devices. Then you

can use those devices.

- Add new: Allows to search

new Bluetooth devices and add

them to your phone’s list of

paired devices. When you

select Add new your handset

will start to search for

Bluetooth devices within range.

Once the device you wish to

pair appears on the list press

the right soft key [Stop].

Scroll to the desired device and

press the left soft key [Pair].

You will then be asked to enter

a passcode. The passcode can

be any code you wish to use

(the same passcode must be

used by both devices) or is one

that is pre-determined by the

manufacturer of the device you

are trying to pair with. Please

check the User Manual of the

device you are initiating the

pair with to see if it already has

a predetermined passcode in

place.

- Rename: Allows you to change

the name of the paired

Bluetooth device and how it is

displayed on the handset.

- Set as authorised/Set as

unauthorised: Allows you to

set an authorised connection

between each Bluetooth

device. For example if you

regularly use a Bluetooth

Sim service

headset with your phone then

setting the connection as

authorised will mean the

headset will automatically

connect to the handset each

time the headset is powered

on.

- Remove: Allows to delete a

paired Bluetooth device.

- Remove all: Allows to delete

all a paired Bluetooth devices.

• Bluetooth settings

- My visibility: This indicates

whether or not your handset

will be visible to other

Bluetooth devices.

- My name: You can set the

name of Bluetooth device. The

default name is LG KE970.

- My address: You can view the

address of your Bluetooth

device.

]Network: You can select a

network which will be registered

either automatically or manually.

• Network selection

Usually, the network selection is

set to Automatic.

- Automatic: If you select

Automatic mode, the phone

will automatically search for

and select a network for you.

Once you have selected

“Automatic”, the phone will be

set to “Automatic” even though

the power is off and on.

- Manual: The phone will find

the list of available networks

and show you them. Then you

can select the network which

you want to use if this network

has a roaming agreement with

your home network operator.

The phone let you select

another network if the phone

fails to access the selected

network.

Sim service

- Preferred: You can set a list of

preferred networks and the

phone attempts to register with

first, before attempting to

This list is set from the phone’s

predefined list of known

networks.

• GPRS attach

You can set GPRS service

depending on various situations.

- Power on

If you select this menu, the

phone is automatically

registered to a GPRS network

when you switch the phone on.

Starting a WAP or PC dial-up

application created the

connection between phone and

network and data transfer is

possible. When you end the

application, GPRS connection is

ended but the registration to

the GPRS network remains.

When needed

If you select this menu, the

GPRS connection is established

when you connect a WAP or

application service and closed

when you end the WAP or

applicaion connection.

• Network profile

- Data connections

Name: You can type the

network name.

Bearer: You can set the bearer

data service.

1 Data/2 GPRS

Appears only if you select Data

Settings as a Bearer/service.

Dial number: Enter the

telephone number to dial to

access your WAP gateway.

User ID: The users identity for

your dial-up server

(and NOT the WAP gateway).

Sim service

Password: The password

required by your dial-up server

(and NOT the WAP gateway) to

identify you.

Call type: Select the type of

data call; Analogue or Digital

(ISDN).

Call speed: The speed of your

data connection; 9600 or 14400

(Depends on Operator)

Linger time: You need to enter

timeout period.

After entering that, the WAP

navigation service will be

unavailable if any data is not

input or transferred.

Primary server: Input the IP

address of the primary DNS

server you access.

Secondary server: Input the

IP address of the secondary

DNS server you access.

The service settings are only

available when GPRS is chosen

as a bearer service.

APN: Input the APN of the

GPRS.

User ID: The users identify for

your APN server.

Password: The password

required by your APN server.

Primary server: Input the IP

address of the primary DNS

server you access.

Secondary server: Input the

IP address of the secondary

DNS server you access.

]USB connection: You can

choose one mode of Data service

and Mass storage.

When you have finished using the

phone memory, click Exit and take

the following steps.

Sim service

1. Click on the notification area.

[Unplug or Eject Hardware]

2. Select USB Mass Storage Device,

click on Stop.

The following message will

appear: “The ‘USB Mass Storage

Device’ device can now be safely

removed from the system”

3. Then remove the cable.

Security settings (Menu 3.0.4)

]PIN code request: In this menu,

you can set the phone to ask for

the PIN code of your SIM card

when the phone is switched on.

If this function is activated, you’ll

be requested to enter the PIN

code.

1. Select PIN code request in the

security settings menu, and

then press [OK].

2. Set On/Off.

3. If you want to change the

setting, you need to enter PIN

code when you switch on the

phone.

4. If you enter wrong PIN code

more than 3 times, the phone

will lock out. If the PIN is

blocked, you will need to key in

PUK code.

Caution

]Before you remove the

cable, it is necessary that

you click Exit. Or, the

integrity of transferred data

is not guaranteed.

Sim service

5. You can enter your PUK code

up to 10 times. If you put wrong

PUK code more than 10 times,

you can not unlock your phone.

You will need to contact your

service provider.

]Phone lock: You can use a

security code to avoid

unauthorized use of the phone.

Whenever you switch on the

phone, the phone will request

security code if you set phone

lock to When switch on.

If you set phone lock to When

SIM changed, your phone will

request security code only when

you change your SIM card.

]Touchpad lock:

]Call barring: The Call barring

service prevents your phone from

making or receiving certain

category of calls. This function

requires the call barring

password. You can view the

following submenus.

• All outgoing : The barring

service for all outgoing calls.

• Outgoing international:

The barring service for all

outgoing international calls.

• O/G international except

home country: The barring

service for all international

outgoing calls except home

network.

• All incoming: The barring

service for all incoming calls.

• Incoming when abroad: The

barring service for all incoming

calls when roaming.

• Cancel all barrings: You can

cancel all barring services.

• Change password: You can

change the password for Call

Barring Service.

Sim service

The submenus:

- Activate: Allows to request the

network to set call restriction on.

- Cancel: Set the selected call

restriction off.

- View status: View the status

whether the calls are barred or not.

]Fixed dial number: You can

restrict your outgoing calls to

selected phone numbers. The

numbers are protected by your

PIN2 code.

• On: You can restrict your

outgoing calls to selected phone

numbers.

• Off: You can cancel fixed

dialling function.

• List view: You can view the

number list saved as Fixed dial

number.

]Change codes: PIN is an

abbreviation of Personal

Identification Number to prevent

use by unauthorized person.

You can change the access codes:

Security code, PIN1 code,

PIN2 code.

1. If you want to change the

Security code/PIN1/ PIN2 code

input your original code, and

then press [OK].

2. Input new Security

code/PIN/PIN2 code and verify

them.

Call settings (Menu 3.0.5)

You can set the menu relevant to a

call by pressing [Select] in the

Setting menu.

]Call divert: The Call divert

service allows you to divert

incoming voice calls, fax calls,

and data calls to another number.

For details, contact your service

provider.

Sim service

• All voice calls: Diverts voice

calls unconditionally.

• If busy: Diverts voice calls

when the phone is in use.

• If no reply: Diverts voice calls

which you do not answer.

• If out of reach: Diverts voice

calls when the phone is

switched off or out of coverage.

• All data calls: Diverts to a

number with a PC connection

unconditionally.

• All fax calls: Diverts to a

number with a fax connection

unconditionally.

• Cancel all: Cancels all call

divert service.

The submenus

Call divert menus have the

submenus shown below.

- Activate: Activate the

corresponding service.

To voice mailbox

Forwards to message centre.

This function is not shown at All

data calls and All fax calls

menus.

To other number

Inputs the number for diverting.

To favourite number

You can check recent 5 diverted

numbers.

- Cancel: Deactivate the

corresponding service.

- View status: View the status

of the corresponding service.

]Answer mode

• Slide open: If you select this

menu, you can receive an

incoming call when you open

the slide.

• Any key: If you select this

menu, you can receive a call by

pressing any key except

[End] key.

• Accept key only: If you select

this menu, you can receive a call

by only pressing [Send]

key.

]Send my number

(network and subscription

dependent)

• Set by network: If you select

this, you can send your phone

number depending on two line

service such as line 1 or line 2.

• On: You can send your phone

number to another party.

Your phone number will be

shown on the receiver’s phone.

• Off: Your phone number will not

be shown.

]Call waiting

(network dependent)

• Activate: If you select Activate,

you can accept a waiting

(receiving) call.

• Cancel: If you select Cancel,

you cannot recognize the

waiting (receiving) call.

• View status: Shows the status

of Call waiting.

]Minute minder: If you select On,

you can check the call duration by

a beep sound given every minute

during a call.

]Auto redial: If y

• On: When this function is

activated, the phone will

automatically try to redial in the

case of failure to connect a call.

• Off: Your phone will not make

any attempts to redial when the

original call has not connected.

]Send DTMF tones: You can

send touch tones during an active

call to control your voice mailbox

or other automated phone

services.

Sim service

Message settings (Menu 3.0.6)

]Text message

• Message types:

Text, Voice, Fax, Paging,

X.400, Email, ERMES

Usually, the type of message is

set to Text. You can convert

your text into alternative

formats. Contact your service

provider for the availability of

this function.

• Validity period: This network

service allows you to set how

long your messages will be

stored at the message centre.

• Delivery report: If you set to

Yes, you can check whether

your message is sent

successfully.

• Reply charging: When a

message is sent, it allows the

recipients to reply and charge

the cost of the reply to your

telephone bill.

• Message centre number: If

you want to send the text

message, you can receive the

address of SMS centre through

this menu.

• Bearer setting: You can set

the bearer setting such as GSM,

GPRS.

]Multimedia message

• Subject: You can enter

multimedia messages subject

when this menu is on.

• Slide duration: Display the

duration of each page when

writing the message.

• Priority: You can set the

priority of the message you

choose.

• Validity period: This network

service allows you to set how

long your text messages will be

stored at the message centre.

• Delivery report: If it is set to

Yes in this menu, you can check

whether your message is sent

successfully.

• Read report: You can receive

the report whether the receiver

read the message or not.

• Auto download: If you select

On, you receive multimedia

messages automatically. If you

select Off, you receive only

notification message in the

inbox and then you can check

this notification. If you select

Home network only, you receive

multimedia messages depends

on Homenetwork.

• Network profile: If you select

multimedia message server, you

can set URL for multimedia

message server.

• Permitted message type

Personal: Personal message.

Advertisement: Commercial

message.

Information: Necessary

information.

]E-mail

• Email account:

This menu allows you to edit,

delete or add an email account.

- View: You can see the Email.

- Set as default

- Edit

Account name: Account

name.

Email address: Enter the

email address given to you by

your service provider.

My name: You can make

your nickname.

Sim service

Incoming mail server: Enter

the POP3 address and Port

number of the that receives

your email.

User name: Enter your email

ID.

Password: Enter your email

password.

Outgoing mail server: Enter

the SMTP address and Port

number of computer that

sends your email.

- Advanced settings

Protocol type: Choose your

protocol type. (POP3/IMAP4)

Maximum receive size:

View the Maximum size that

you can receive mails.

Save to server: Select Yes

to leave the messages on the

server.

Insert signature: Select Yes

to attach your signature to

your email messages.

Reply email address: Email

address that you can receive

the reply.

Incoming port number:

Allow you to edit POP3 port

number.

Outgoing port number:

Allow you to edit SMTP port

number.

Outgoing mail

authentication: when you

send the mail, you can set

authentication whether or not.

Outgoing server

ID/password: Enter the ID

and password for sending

your email.

- New account: You can set

up to 5 email accounts by

selecting New account menu.

Using the Edit menu, you can

set the following values.

- Delete: Deletes the selected

account from the list.

- Delete all: You can delete all

account lists.

• Network profile: A profile is

the network information used to

connect to the Internet. There

are default profiles for some

operators, stored in phone

memory. It’s impossible to

rename default profiles.

• Signature: You can make your

signature.

]Voicemail number: You can

receive the voicemail if your

network service provider supports

this feature. When a new

voicemail is arrived, the symbol

will be displayed on the screen.

Please check with your network

service provider for details of their

service in order to configure the

phone accordingly.

]Push message: You can set the

option whether you will receive

the message or not.

]Info message

• Receive

Yes: If you select this menu,

your phone will receive Info

service messages.

No: If you select this menu, your

phone will not receive Info

service messages any more.

Sim service

• Alerts

Yes: Your phone will beep

when you have received Info

service message numbers.

No: Your phone will not beep

even though you have received

info service messages.

• Language: You can select the

language you want by pressing

OK key. Then, the info service

message will be shown in the

language that you selected.

WAP settings (Menu 3.0.7)

]Network profile: A profile is the

network information used to

connect to the Internet.

There are default profiles for

some operators, stored in phone

memory. It’s impossible to

rename default profiles.

Each profile has submenus as

follows:

• Activate: Activates the

selected profile.

• View: You can see the selected

profile.

• Edit: You can edit the selected

profile.

• New profile: You can add a

new profile.

• Delete: Deletes the selected

profile from the list.

• Delete all: Deletes all profile

from the list.

• Reset all: Allows you to reset

all profiles.

]View style:

]Cache: The information or

services you have accessed are

saved in the cache memory of the

phone.

]Cookie: Check whether a cookie

is used or not.

]Security certifications: You

can see the list of personal.

Certificates that have been stored

in your phone.

]Show image:

]Javascript:

]Memory in use:

Original settings (Menu 3.0.8)

]Reset settings

]Reset phone memory

]Reset all

Original settings (Menu 3.0.9)

]Common

]Reserved

]SIM card

]External memory

Note

]A cache is a buffer

memory, which is used to

save data temporarily.

Sim service

Tones&Images

Tones&Images Menu 4.1

Videos Menu 4.2

Shows the list of 3GP, 3G2 files at

My media\Videos in Multimedia

memory. Supported file types are

3gp files, that are encoded with

MPEG4 and h.263 video-codecs and

AMR audio-codec.

]Play: You can play the video file

when pressing OK key or

selecting Play menu of Option

menus.

]Delete: Delete a file.

]Send via: Send the selected file

to another device via Multimedia

message, Bluetooth or Email.

]File: You can save/move/copy

the folder or external memory.

- Rename: Change the file name

of selected file.

The maximum length of

characters is 36. And you can

not change the extension of file.

- Move to folder: Move the

selected file to the folder.

Warning!

You can’t use the following

characters \ / : * ? “ < > |

Note

]You may send files via

Bluetooth only if they are

stored in phone memory,

not on memory card. To

send file from external

memory, please, firstly copy

it to internal phone

memory.

- Move to external memory:

Move the selected file to the

Multimedia memory\external

memory

- Copy to external memory:

Copy the selected file to the

Multimedia memory\external

memory.

- Information: Shows the file

information.

]New folder: You can create a

new folder.

]Multi delete: You can remove a

number of files you have selected.

]Delete all: Delete all the files in

the list.

Sounds Menu 4.3

Show the list of MP3, MP4, AAC,

M4A files at My media\Music in

Multimedia memory.

]Play: You can play the MP3 file

when pressing OK key or

selecting Play menu of Option

menu.

]Set as: Currently selected sound

can be set as a

Ringtone/Ringtone ID.

]File info: Show the file

information.

Warning!

If you remove the external memory

during data transfer it will cause

serious damage to your phone.

Tones&Images

Images Menu 4.4

Show the list of JPG files at My

media\Photos in Multimedia

memory.

]View: You can see the JPG file

when pressing OK key or

selecting View menu of Option

menus.

]Delete: Delete a file.

]Set as

- Full image wallpaper:

Currently selected image can be

set as a wallpaper.

- Landscape wallpaper:

Currently selected image can be

displayed horizontally as a

wallpaper.

- Picture ID: Currently selected

image can be set as a Picture ID.

]Send via: Allows you to send a

image through

MMS/Bluetooth/Email.

]File

- Rename: Change the file name

of selected file. You can not

change the extension of file.

- Move to folder: Move the

selected file to the folder.

- Move to external memory:

Move the selected file to the

Multimedia memory/external

memory.

- Copy to external memory:

Copy the selected file to the

Multimedia memory/external

memory.

Warning!

If you remove the external memory

during data transfer, it can seriously

damage the phone.

Note

]You can’t use the following

characters \ / : * ? ” < > |

- Information: Show the file

information.

]Print via Bluetooth: Most

pictures that you’ve taken in the

camera mode and downloaded

through WAP can be transmitted

via Bluetooth to a printer.

]Slide show

You can view a slide show of the

files you stored.

]New folder: You can create a

new folder.

]Multi delete: You can remove a

number of files you selected.

]Delete all: Delete all files in the

list.

]List view: Allows you to set the

view type.

Others Menu 4.5

Show the list of files in My

media\Others in the Multimedia

memory.

Note

]You may send files via

Bluetooth only if they are

stored in the phone

memory, not on the memory

card. To send files from the

external memory you must

first copy it to the internal

phone memory.

Warning!

If you remove the external memory

during data transfer, it can seriously

damage the phone.

Tones&Images

Memory status Menu 4.6

You can check free space and

memory usage of each repository,

Internal memory and Multimedia

memory. You can go to each

repository menu.

Note

]When you connect the

phone with a PC via

Bluetooth, you can both

send and receive files to

the Music and Video

folders. You can copy any

file type to the Others. You

can only receive files from

the Photos, Sounds, and

Images folders. You can

only view or play files in the

Others folder if the file

types are supported. When

connecting with a PC via

USB cable you will only see

the following folders in the

internal memory: Images,

Sounds, Videos, and

Others. You can see all

folders in the external

memory.

Search Menu 5.1

1. Select Search by press the left

soft key [OK].

2. Enter the name that you want to

search.

3. If you want to edit, delete, copy

an entry, or to add the voice to

one, select left soft key

[Options].

The following menu will be

displayed.

]View: You can view each entry in

details.

]Edit: You can edit the name,

number, group, ringtone and

picture by using the navigation

key.

]New message: After you have

found the number you want, you

can send a

message(Text/Multimedia/Email)

to the selected number.

]Send via: You can send the data

of phone book via Text message,

Multimedia message, Bluetooth

or Email.

]Delete: You can delete an entry.

]New contact: After selecting

the place (SIM/Phone) you want

to save, you can add to the

phonebook list.

]Multi delete: Allows you to

remove a number of files

selected.

]Copy to handset/SIM: You can

copy an entry from SIM to phone

or from phone to SIM.

]Main number: If a contact has

more than one number stored,

select the one that you use most

often. This main number will be

displayed first.

Note

]Instant searching is

available by inputting the

initial letter of the name.

Phonebook

New contact Menu 5.2

You can add phonebook entry by

using this function. Phone memory

capacity is 1000 entries. SIM card

memory capacity depends on the

cellular service provider. The

number of character is SIM

dependent feature.

1. Select New contact by press left

soft key [OK].

2. Input a name.

3. Press , then you can input a

number.

4. You can set a group for the entry

by pressing , .

5. You can set a ringtone and a

photo for the entry by press left

soft key [Options].

Speed dials Menu 5.3

You can assign any of the keys

to with a Name list entry. You

can call directly by pressing this key.

1. Open the phonebook first by

pressing the right soft key

[Contacts] in standby mode.

2. Scroll to Speed dial, then press

the left soft key [OK].

3. If you want to add speed dial,

select <empty> by pressing the

left soft key [Assign]. Then,

you can search the name in

phonebook.

Note

]Maximum stored name and

number length depends on

SIM-card type.

4. After assigning the number as

speed dial, you can change and

delete the entry. You can also

make a call or send a message by

this number.

Gouprs Menu 5.4

You can list up to the members per

each group. There are 7 groups you

can make lists to.

]View members: Shows the

group members you have

selected.

]Group ringtone: Allows you to

specify ring tone for the group

members’ call.

]Group icon: Allows you to select

the icon dependent on Group.

]Add member: You can add group

members.

]Remove member: You can

remove the member from the

Group member list. But the name

and the number will be remained

in phonebook.

]Remove all members: Allows

you to delete all the members in

the group.

]Rename: You can change a

group name.

Copy all Menu 5.5

You can copy entries from SIM card

memory to Phone memory and vice

versa.

]SIM to phone: You can copy the

entry from SIM Card to Phone

memory.

]Phone to SIM: You can copy the

entry from Phone memory to SIM

Card.

Phonebook

Delete all Menu 5.6

You can delete all entries from SIM

or Phone.

Settings Menu 5.7

1. Press the right soft

[Contacts] in standby mode.

2. Scroll to Settings, then press the

left soft key [OK].

View options (Menu 5.7.1)

Scroll to highlight View options, and

then press the left soft key [OK].

]Name and number: Set the

phonebook list with displaying

only name.

]With picture: Set the phonebook

list with the information of

character and picture.

Information Menu 5.8

Service dial numbers (Menu 5.8.1)

Use this function to access a

particular list of services provided by

your network operator (if supported

by the SIM card).

Own numbers (SIM dependent)

(Menu 5.8.2)

You can save and check your own

number in SIM card.

Business card (Menu 5.8.3)

This option allows you to create

your own business card featuring

Name and an mobile phone number.

To create a new business card,

press the left soft key [New]

and enter the information into the

fields. If you want to edit, delete or

to send a business card, select left

soft key [options].

New message Menu 6.1

This menu includes functions related

to SMS (Short Message Service),

MMS (Multimedia Message

Service), Email, voice mail, as well

as the network’s service messages.

Text (Menu 6.1.1)

You can write and edit text

message.

1. Enter the New messages menu by

pressing the left soft key

[OK].

2. If you want to write a new

message, select Text.

3. To make text input easier, use T9.

4. Press [Options] to attach the

followings.

Options

]Send to: Sends text messages.

1. Enter numbers of recipient.

2. Press key to add more

recipients.

3. You can add phone numbers in

the address book.

4. Press the [Option] and then

press send after entering

numbers.

]Insert

- Symbol: You add special

characters.

- Image: You can insert the

Default graphics or graphics in

My pictures that are available

for short messages.

- Sound: You can insert sounds

that are available for short

messages.

- Default images: You can insert

Animations stored.

- Default sounds: You can insert

Sounds stored.

Messages

- Text template: You can use

Text templates already set in the

phone.

- Contacts: You can add phone

numbers or e-mail addresses in

address book.

- My business card: You can

add your Business card to the

message.

]Save to drafts: Stores messages

in Drafts.

]T9 languages: Select the

language for T9 input mode. You

can also deactivate T9 input mode

by selecting

‘T9 off’.

]New T9 word: Select the New

T9 word for inputting New word

into the dictionary.

]Clear text: You can clear text

while writing SMS.

]Exit: If you press Exit while

writing a message, you can end

the writing message and back to

the Message menu. The message

you have written is not saved.

Multimedia (Menu 6.1.2)

You can write and edit multimedia

messages, checking message size.

1. Enter the New message menu by

pressing the left soft key

[OK].

2. If you want to write a new

message, select Multimedia.

3. You can create a new message or

choose one of the multimedia

message templates already

made.

Maximum available file size, that

can be inserted to MMS-message,

is 300 kb.

Messages

Options

]Send to: You can send

multimedia messages to multiple

recipients, priorities your

message, and make it sent later

as well.

]Insert: You can add Symbol,

Image, Video, Sound, New slide,

Text template, Contact, Business

card, Others.

]Preview: You can preview

multimedia messages you have

created.

]Save: You can save multimedia

messages To drafts or As

templates

]Edit subject: Allows you to

modify the multimedia message

you have chosen.

]Slide duration: You can set the

duration of slide of multimedia

message.

]T9 languages: Select the

language for T9 input mode. You

can also deactivate T9 input

mode by selecting ‘T9 off’.

]New T9 word: Select the New

T9 word for inputting New word

into the dictionary.

]Exit: You can get back to the

Message menu.

Note

]

All messages will be

automatically saved in the

outbox folder, even after a

sending failure.

Messages

Email (Menu 6.1.3)

To send/receive an email, you

should set up the email account.

1. You can input up to 20 email

addresses in the To and Cc field.

Tip: To input “@”, press the

and select “@”.

2. Key in the subject of the mail and

press OK.

3. After writing an email message,

press the left soft key

[Options]. You can access the

following option menus.

]Send to: You can edit recipients.

]Insert: You can add Symbol, Text

template, Contact and Signature.

]Attachment: You can attach file

with this menu.

]Preview: You can preview the

writing mail.

]Save to drafts: Select this to

save the message in Drafts.

]Edit subject: You can edit the

subject.

]T9 languages: Select the

language for T9 input mode. You

can also deactivate the T9 input

mode by selecting ‘T9 off’.

Note

]If you select a picture with a

large file size (200K for

example) on writing

multimedia message, the

loading duration will take

around 10 seconds.

Furthermore, you can’t

activate any keys during the

loading time. After about 10

seconds, you should be able

to write the message.

Messages

]New T9 word: Select the New

T9 word menu for inputting a new

word into the dictionary.

]Clear text: You can clear text

while writing the message.

]Exit: If you select this while

writing the message, you can exit

from writing message and go

back to the previous screen. The

message you have written is not

stored.

In case Drafts Outbox or

Sent folder is full, and you

try to save new message to

one of this folders, first

saved message will be

automatically deleted.

]Maximum size for one sent

message is 300 kb with

attachments, and

maximum size for one

received message is 300

kb. In case you have

received message with

more than 5 attachments,

only 5 of them will be

received. Some attachment

may display incorrectly.

Note

]For each e-mail account you

may save up to 40

messages (totally 200 for

five accounts). In Inbox

folder you may save not

more than 20 messages, in

Drafts and Outbox folders -

5 messages, and in Sent

folder up to 10 messages.

Messages

Received messages

Menu 6.2

You will be alerted when you have

received messages. They will be

stored in Inbox.

If the phone shows ‘No space for

SIM message’, you have to delete

only SIM messages from Inbox. If

the phone displays ‘No space for

message’, you can make space of

each repository as deleting

messages, media and applications.

* SIM message

SIM message means the message

exceptionally stored in SIM card.

You can move this message to the

phone.

For notified multimedia message,

you have to wait for downloading

and processing of the message.

To read a message, select one of

the messages by pressing the left

soft key .

]View: You can view the received

messages.

]Delete: You can delete the

current message.

]Reply: You can reply to the

sender.

]Reply to all: You can reply to all

of the sender.

]Forward: You can forward the

selected message to another

party.

]Return call: You can call back to

the sender.

]Information: You can view

information about received

messages; Sender’s address,

Subject (only for Multimedia

message), Message date & time,

Message type, Message size.

]Multi delete: After selecting the

messages you want to remove,

you can delete the selected

messages.

Messages

]Delete all read: You can delete

all messages read.

]Delete all: You can delete all

messages.

E-mail box Menu 6.3

When you access this menu, you

can either connect to your remote

mailbox to retrieve your new email

messages, or you can view the

previously retrieved email messages

without logging in to the email

server.

You can check the saved emails,

drafts, outbox, and sent emails. In

the Inbox, up to 20 emails are

stored.

(Outbox stores up to 5, Draftes store

up to 5, Sent stores up to 10)

Sent messages Menu 6.4

This menu allows you to view the

messages which are already sent.

You can check the time and the

contents of message.

Voice Mail Menu 6.5

Once this menu has been selected,

simply press the left soft key

[OK] to listen to voice mail. You can

also hold down the key in

standby mode to listen to voice mail.

Note

]When you receive a voice

mail, your phone displays

the icon and you hear an

alert. Please check with

your network provider for

details of their service in

order to configure the

handset correctly.

Messages

Messenger Menu 6.6

VIVO Chat Menu 6.7

Templates Menu 6.8

SMS (Menu 6.8.1)

You have 6 text templates as below;

• Please call me back.

• I’m late. I will be there at

• Where are you now?

• I’m on the way

• Urgent! Please contact.

• I love you

The following options are available.

]View: You can see multimedia

templates.

]Edit: Use this to write a new

message or edit the selected

template message from the text

template list.

]Send via

- Text message: Use this to

send the selected template

message by SMS.

- Multimedia message: Use

this to send the selected

template message by MMS.

- Email: This menu allows you to

edit, delete or add an email

account.

]Delete: Deletes the template.

]New template: Use this to

create new template.

]Delete all: Allows you to delete

all multimedia messages.

Messages

MMS (Menu 6.8.2)

After saving new template, you can

use the following options.

]Save: Allows you to save new

multimedia templates you

created.

]Insert: You can add Symbol,

Image, Video, Sound, New slide,

Text template, Contact, Business

card and Others.

]Preview: You can preview

multimedia templates you wrote.

]Edit subject: Allows you to

modify the multimedia message

you have chosen.

]Slide duration: You can set the

duration of slide of multimedia

message.

]T9 languages: Select the

desired language for T9 input

mode. You can also deactivate T9

input mode by selecting ‘T9 off’.

]Exit: Will take you back to the

Message menu.

Drafts Menu 6.9

Using this menu, you can preset

multimedia messages that you use

most frequently. This menu shows

the preset multimedia message list.

The following options are available.

]View: You can see the

multimedia messages.

]Edit: Modifies the message you

choose.

]Delete: Deletes the message you

choose.

]Information: You can view

information about the message

you choose.

Messages

]Multi delete: After selecting the

messages you want to remove,

press OK and you can delete the

selected messages.

]Delete all: Deletes all of the

messages in the folder.

Outbox Menu 6.10

This menu allows to view the

message which is about to send or

is failed sending.

After sending the message

successfully, the message will be

moved to sent box.

]View: You can view the

message.

]Delete: You can delete the

message.

]Resend: You can resend the

selected message.

]Edit: Modifies the massage you

choose.

]Information: You can check

information of each message.

]Multi delete: Select and delete

the selected messages.

]Delete all: You can delete all

messages in outbox.

Info message Menu 6.11

(Dependent to network

and subscription)

Info service messages are text

messages delivered by the network

to GSM. They provide general

information such as weather

reports, traffic news, taxis,

pharmacies, and stock prices.

Each type of has the number;

therefore, you can contact service

provider as long as you have input

the certain number for the

information.

Messages

When you have received an info

service message, you can see the

popup message to show you that

you have received a message or the

info service message is directly

displayed.

To view the message again or not in

standby mode, follow the sequence

shown below;

Read (Menu 6.11.1)

1. When you have received an info

service message and select Read

to view the message, it will be

displayed on the screen. You can

read another message by scrolling

, or [Next].

2. The message will be shown until

another message is reached.

Topics (Menu 6.11.2)

(Dependent to network and

subscription)

]View list: You can see Info

service message numbers which

you added. If you press

[Options], you can edit and delete

info message category which you

added.

]Active list: You can select info

service message numbers in the

active list. if you activate an info

service number, you can receive

messages sent from the number.

Messages

Message settings

Menu 6.12

Text message (Menu 6.12.1)

]Message types:

Text, Voice, Fax, Paging,

X.400, Email, ERMES

Usually, the type of message is

set to Text. You can convert your

text into alternative formats.

Contact your service provider for

the availability of this function.

]Validity period: This network

service allows you to set how

long your messages will be stored

at the message centre.

]Delivery report: If you set to

Yes, you can check whether your

message is sent successfully.

]Reply charging: When a

message is sent, it allows the

recipients to reply and charge the

cost of the reply to your telephone

bill.

]Message centre number: If you

want to send the text message,

you can receive the address of

SMS centre through this menu.

]Bearer setting: You can set the

bearer setting such as GSM,

GPRS.

Multimedia message

(Menu 6.12.2)

]Subject: You can enter

multimedia messages subject

when this menu is on.

]Slide duration: Display the

duration of each page when

writing the message.

]Priority: You can set the priority

of the message you choose.

]Validity period: This network

service allows you to set how

long your text messages will be

stored at the message centre.

]Delivery report: If it is set to Yes

in this menu, you can check

whether your message is sent

successfully.

]Read report: You can receive the

report whether the receiver read

the message or not.

]Auto download: If you select

On, you receive multimedia

messages automatically. If you

select Off, you receive only

notification message in the inbox

and then you can check this

notification. If you select Home

network only, you receive

multimedia messages depends on

Homenetwork.

]Network profile: If you select

multimedia message server, you

can set URL for multimedia

message server.

]Permitted message type

Personal: Personal message.

Advertisement: Commercial

message.

Information: Necessary

information.

E-mail (Menu 6.12.3)

]Email account

This menu allows you to edit,

delete or add an email account.

• View: You can see the Email.

• Set as default

• Edit

Account name: Account

name.

Email address: Enter the

email address given to you by

your service provider.

My name: You can make your

nickname.

Messages

Incoming mail server: Enter

the POP3 address and Port

number of the that receives

your email.

User name: Enter your email

ID.

Password: Enter your email

password.

Outgoing mail server: Enter

the SMTP address and Port

number of computer that sends

your email.

- Advanced settings

Protocol type: Choose your

protocol type. (POP3/IMAP4)

Maximum receive size:

View the Maximum size that

you can receive mails.

Save to server: Select Yes to

leave the messages on the

server.

Insert signature: Select Yes

to attach your signature to

your email messages.

Reply email address: Email

address that you can receive

the reply.

Incoming port number:

Allow you to edit POP3 port

number.

Outgoing port number:

Allow you to edit SMTP port

number.

Outgoing mail

authentication: when you

send the mail, you can set

authentication whether or not.

Outgoing server

ID/password: Enter the ID and

password for sending your

email.

Messages

• New account: You can set up

to 5 email accounts by

selecting New account menu.

Using the Edit menu, you can

set the following values.

• Delete: Deletes the selected

account from the list.

• Delete all: You can delete all

account lists.

]Network profile

A profile is the network

information used to connect to

the Internet. There are default

profiles for some operators,

stored in phone memory. It’s

impossible to rename default

profiles.

]Signature

You can make your signature.

Voicemail number (Menu 6.12.4)

You can receive the voicemail if your

network service provider supports

this feature. When a new voicemail

is arrived, the symbol will be

displayed on the screen. Please

check with your network service

provider for details of their service in

order to configure the phone

accordingly.

Push message (Menu 6.12.5)

You can set the option whether you

will receive the message or not.

Info message (Menu 6.12.6)

]Receive

Yes: If you select this menu, your

phone will receive Info service

messages.

No: If you select this menu, your

phone will not receive Info service

messages any more.

Messages

]Alerts

Yes: Your phone will beep when

you have received Info service

message numbers.

No: Your phone will not beep

even though you have received

info service messages.

]Language

You can select the language you

want by pressing OK key. Then,

the info service message will be

shown in the language that you

selected.

Entertainment

Games Menu 7.1

Voice portal Menu 7.2

VIVO Informe Menu 7.3

WAP

You can access various WAP

(Wireless Application Protocol)

services such as banking, news,

weather reports and flight

information. These services are

specially designed for mobile

phones and they are maintained by

WAP service providers.

Check the availability of WAP

services, pricing and tariffs with

your network operator and/or the

service provider whose service you

wish to use. Service providers will

also give you instructions on how to

use their services.

Once connected, the homepage is

displayed. The content depends on

the service provider. To exit the

browser at any time, press the

() key. The phone will return to

the idle menu.

Navigating with the WAP

browser

You can surf the Internet using

either the phone keys or the WAP

browser menu.

Using the phone keys

When surfing the Internet, the

phone keys function differently to

phone mode.

Key Description

Scrolls each line of

the content area

Returns to the

Selects options and

confirms actions

Using the WAP browser menu

There are various menu options

available when surfing the Mobile

Web.

Home Menu 8.1

Connects to a homepage. The

homepage will be the site which is

defined in the activated profile. It

will be defined by the service

provider if you have not defined it in

the activated profile.

Preferred links Menu 8.2

Quiz Menu 8.3

Cupido Menu 8.4

Tones&Images Menu 8.5

Guides&Leisure Menu 8.6

Portals Menu 8.7

Sports Menu 8.8

Games Menu 8.9

Note

]The WAP browser menus

may vary, depending on

your browser version.

WAP

MP3 player Menu 4.1

The KE970 has an integrated MP3

player built-in. You can enjoy

listening to MP3 music files on your

phone using a compatible headset

or via the internal loudspeaker.

The music player supports:

• MPEG-2 Layer III, MPEG-2.5

Layer III: Sampling frequency up

from 8KHz to 48KHz. Bit rate up to

320Kbps, stereo.

• AAC: ADIF, ADTS formats

(Sampling frequency from 8KHz to

48KHz)

• AAC+: V1: (Bit rate 16~128Kbps)

V2 : (Bit rate 16~48Kbps)

(Sampling frequency from

8KHz to 48KHz)

You can transfer MP3 files from a

compatible PC to the memory in

your phone using the Mass Storage.

Note

]KE970 doesn’t support the

variable bit rate of all

mentioned file types.

Therefore, you can’t change

the file from MP3 format to

AAC.

Note

]Because of the small

dimension of the speaker,

in some cases the audio

could be distorted,

especially at maximum

volume and when there are

lots of bass sounds.

Therefore, we recommend

you to use the stereo

headset in order to

appreciate the high quality

of your music.

Extras

When you connect the phone to a

PC using the USB cable(supplied in

the same package), this will be

displayed as a removable disk

through Windows Explorer. If you

are using Win98 SE, you will have to

install the Mass storage driver for

Windows 98 on CD-ROM.

Repeat

Play all

Repeat all

Repeat one

1. Press Multimedia menu, and then

select MP3 player.

2. Press the left soft key

[Options] to access the following

menus.

]Pause: You can pause the

playing MP3 file.

Note

]In case that any invalid file

is included in the playlist,

an error message will pop

and go back to the prior

screen.

Note

]You should copy MP3 to

Sounds/MP3 folder. If you

copy to another folder, you

will not be able to view the

MP3 files.

]The PC should run

Windows 98 SE, Windows

ME, Windows 2000,

Windows XP operating

system.

Extras

]View playlist: You can select

another file on the MP3 list.

]Set as ringtone: You can set the

current music on playing MP3 file

as a ringtone

]Settings

- Equalizer: This menu helps you

to adjust to a variety of

environments when listening to

music.

- Play mode: This menu allows

to set the play mode: Repeat

one, Repeat all,Play all.

- Set shuffle: It you select On,

you can listen to the music at

random.

- Visual effect: You can select

the visual effect menus: Real

spectrum, Fake. This menu

allows to change the

background of main LCD on

playing MP3 file.

Note

]Music is copyright

protected in international

treaties and national

necessary to obtain

permission or a license to

reproduce or copy music. In

some countries national

law prohibits private

copying of copyrighted

material. Please check the

national legislation of the

applicable country

concerning the use of such

material.

Extras

Camera Menu 9.2

Using the camera module built in

your phone, you can take pictures or

record videos. Additionally, you can

send photos to other people and

select photos as wallpaper.

For your convenience, rotate phone

as shown below when taking

picture.

1/2Zoom in/Zoom out

3Camera

Shutter sound or video recording

sound is omitted even when setting

mode, including manner mode .

• To take a picture

Hold down the camera button.

The camera will be ready to use and

you may want to rotate the screen

into a horizontal position.

- To take clear pictures, press the

camera button while holding

the camera without any

movement.

Note

]When using the camera,

power consumption

increases. If this icon

appears on the wallpaper,

indicating low battery,

recharge the battery before

use.

Extras

12 3

Album

Options

Album

Options

- Appropriately adjust distance to

the object that you want take a

picture of (more than 50 cm).

- Handle carefully since the camera

is vunerable to shock and use a

soft cloth when cleaning the

camera lens.

- Do not disassemble or modify the

camera as this may lead to fire or

malfunctioning.

Auto Focus function is enabled

when taking a picture or sticker

shot. Press the camera button

half way to adjust focus.

1. Hold down the in standby

mode.

2. Focus on the subject to capture

the image, and then press the

key.

3. If you want to save it, press the

key.

]Shot mode [ ]: Allows you to

set the shot mode from Marco,

Auto focus On and Off.

]Resolution [ ]: Allows you to

set the image size.(1600x1200),

(1280x960) (640x480) and

(320x240). Multishot is only

available with the (320x240),

(640x480) pixel resolution.

]Quality [ ]: Allows you to set

the image quality from Normal,

Fine and Super fine.

]Flash [ ]: Allow you to set

the flash when you take a photo

in dark place.

Note

]You can adjust the

brightness by using the

Extras

]Self timer [ ]: Allows you to

select the delay time (Off, 3

seconds, 5 seconds, 10 seconds).

Then the phone takes a photo

after the specified time.

]Save to [ ]: You can set the

space after taking a picture.

(External/Phone)

]Multi shot [ ]: Allows to take

multishot photos successively.

]Metering [ ]: Determines the

lighting based on a little part of

the subject. You can select the

Centred and Combined which is

to be exposed correctly.

]Colour effect [ ]: 4 settings

are available.

(Negation/Mono/Sepia/Colour)

]White balance [ ]: Allows

you to change the settings

according to the enviroment.

(Fluorescent/Cloudy/Incandescent

/Daylight/Auto)

]Shutter tone [ ]: You can set

the sound when taking a picture.

]Reset settings [ ] : Allows

you to reset the settings.

Video camera Menu 9.3

1. Select Video camera menu.

2. Video camera settings menu is

the same with Photo camera

settings, except following items:

]Mode [ ]: Allows you to set

to send a video file through MMS

or General.

]Resolution [ ]: You may

select the following resolution:

128x96, 176x144 .

Extras

Voice notes Menu 9.4

Calendar Menu 9.5

When you enter this menu a

calendar will show up. On top of the

screen there are sections for date.

Whenever you change the date, the

calendar will be updated according

to the date. And square cursor will

be used to locate the certain day. If

you see marked date in the

calendar, it means that there is a

schedule or memo that day. This

function helps to remind you of your

schedule and memo. The phone will

sound an alarm tone if you set this

for the note.

To change the day, month, and year.

Key Description

, Yearly

, Monthly

,Weekly

, Daily

Extras

Alarm Menu 9.6

You can set the alarm clock to go off

at a specified time.

1. Select On and enter the alarm

time you want.

2. Select the repeat period: Once,

Mon-Fri, Mon-Sat, Sat-Wed, Sat-

Thu, Everyday.

3. Select the alarm tone you want

and press [Set].

Memo Menu 9.7

1. Select the Memo by pressing the

left soft key [OK].

2. If the entry is empty, press the left

soft key [New].

3. Input the memo and then press

left soft key [Options] >

[Save].

To do Menu 9.8

Note

]If you want to change the

text input mode, press the

in order.

Extras

Calculator Menu 9.9

This contains the standard functions

such as +, -, x, ÷ : Addition,

Subtraction, Multiplication, and

Division.

Furthermore, you can use the

various function of calculator such

as +/-, sin, cos, tan, log, ln, exp, sqrt,

deg, rad.

1. Input the numbers by pressing

numeric keys.

2. Use a navigation key to select a

sign for calculation.

3. Then input the numbers.

4. Press key to view the result.

5. To input the decimal number,

press key.

6. To end Calculator, press the right

soft key [Back].

Chronometer Menu 9.0

1. Press [Start] to take time and

record the lap time by pressing

[Lap].

2. Press [Stop] to ascertain the

record of lap time.

3. Press [Reset] to default condition.

Extras

World time Menu 9.*

You can check the current time of

Greenwich Mean Time (GMT) and

major cities around the world, using

the left/right navigation keys and

left soft key [Zoom in].

The screen shows the city name,

current date and time.

To select the time zone in which you

are located, proceed as follows:

1. Select the city corresponding to

your time zone by pressing the

left/right navigation keys and left

soft key [Zoom in] one or more

times. The local date and time are

displayed.

2. If you want to change the time

display in standby mode to the

selected time, press [OK] key.

FM radio Menu 9.#

You can search radio stations and

enjoy listening to the

radio. Connect the FM Radio

headset into headset jack

on the right side of the phone to

activate this menu.

1. Press the corresponding number

key of a channel to store the

currently selected radio station

into.

2. After presetting radio channels,

you can listen to other channel by

pressing the corresponding

number key (short press).

Extras

3. You can access the following

option menus by pressing the left

soft key [Options].

]Edit : You can adjust frequency

and change the radio station in

the selected channel. You can

change the frequency 0.1 MHz at

a time with Left/Right navigation

keys and number keys.

]Auto scan: If you select “Auto

Scan Now?” On, automatically

set the radio channel. And When

“Save this Station?” message will

be popped up, if you select Yes,

the selected frequency will be

stored.

]Reset all channels: You can

delete all channels you saved.

]Listen via speaker: Select this

to listen to the radio through the

built-in speaker. To turn off the

speaker, select “Listen via

headset” in the [Options].

Extras

Phone settings Menu 0.1

]Data & Time:You can set

functions relating to the date and

time.

• Set date: You can enter the

current date.

• Date format: You can set the

Date format such as

YYYY/MM/DD, DD/MM/YYYY,

MM/DD/YYYY.

(D: Day / M: Month / Y: Year)

• Set time: You can enter the

current time.

• Time format: Your can set the

time format between 24 hours

and 12 hours.

• Auto update: Select On, the

phone will automatically

update the data and time.

]Languages: You can change the

language for the display texts in

your phone. This change will also

affect the Language Input mode.

]Flight mode: This allows you to

use only the phone’s features that

do not require the use of the

wireless network when you are in

an airplane or in places where the

wireless network is prevented.

If you set the flight mode on, the

icon will be displayed on the screen

instead of the network signal icon.

• On: You cannot make (or

receive) any calls, including

emergency calls, or use other

features that require network

coverage

• Off: You can deactivate the

flight mode and restart your

handset to access the network.

]Power save: If you set On, you

can save the power when you

don’t use the phone.

Settings

Phone settings Menu 0.2

In Profiles, you can adjust and

customise the phone tones for

different events, environments, or

caller groups.

There are five preset profiles:

General, Silent, Vibrate only,

Outdoor and Headset.

Each profile can be personalised.

Press the left soft key [Menu] and

select Profiles using up/down

navigation keys.

Display settings Menu 0.3

]Wallpaper: You can select the

background pictures in standby

mode.

]Backlight timer: You can set the

light-up duration of the display.

(Off/10 secs/20 secs/30 secs/60

secs)

]Brightness: You can set the

brightness of LCD: 100%, 80%,

60%, 40%

]Home screen shortcut:

Selecting On displays the

functionalities of 4 Navigation

keys and Menu key as pictures on

the middle of the idle window.

(Profiles/Messaging/

Favourites/Contacts)

]Theme:

]Menu style: Your phone

provides you with Grid and List

menu themes. Set the menu style

by scrolling and pressing the left

soft key [OK].

]Main font style

]Dialing font style: Your phone

provides you with four dialing

styles. (Color style/Beads

style/Digital style/Sketchbook

style)

Settings

]Standby text: If you select On,

you can edit the text which is

displayed in standby mode.

]Network name: If this function

is activated, network name will

be displayed on LCD.

]Touchpaf calibration:

Shortcuts Menu 0.4

Selecting On displays the

functionalities of 4 Navigation keys

and Menu key as pictures on the

middle of the idle window.

(Profiles/Messaging/ Favourites/

Contacts)

Connectivity Menu 0.5

]Bluetooth: Bluetooth enables

compatible mobile devices,

peripherals and computers that

are in close proximity to

communicate directly with each

other without wires. This handset

supports built-in Bluetooth

connectivity, which makes it

possible to connect them with

compatible Bluetooth headsets,

computer applications and so on.

Note

]If you use LG PC Sync via

Bluetooth, you can

exchange the data only

within phonebook

Settings

• Bluetooth on/off

You can activate or cancel the

Bluetooth function.

• Device list

You can view all devices which

your KE970 is already paired to.

If you enter Paired devices, you

access the options

- Connect / Disconnect: After

pairing with headset or stereo

headset, you should connect

with those devices. Then you

can use those devices.

- Add new: Allows to search

new Bluetooth devices and add

them to your phone’s list of

paired devices. When you

select Add new your handset

will start to search for

Bluetooth devices within range.

Once the device you wish to

pair appears on the list press

the right soft key [Stop].

Scroll to the desired device and

]When you receive data

from another Bluetooth

device, the phone requests

confirmation. After

confirming the transfer, the

file will be copied on to

your phone.

]Depending on the file type,

it will be stored in the

following folders:

- Video (.3gp, mp4):Videos

folder

- Image (.bmp, gif, jpg,

png):Images folder

- Sound (.amr, wav, aac):

Sounds folder

- MP3 (.mp3):Sounds/MP3

folder

- Other files (.txt, html):

Others folder

Settings

press the left soft key [Pair].

You will then be asked to enter

a passcode. The passcode can

be any code you wish to use

(the same passcode must be

used by both devices) or is one

that is pre-determined by the

manufacturer of the device you

are trying to pair with. Please

check the User Manual of the

device you are initiating the

pair with to see if it already has

a predetermined passcode in

place.

- Rename: Allows you to change

the name of the paired

Bluetooth device and how it is

displayed on the handset.

- Set as authorised/Set as

unauthorised: Allows you to

set an authorised connection

between each Bluetooth

device. For example if you

regularly use a Bluetooth

headset with your phone then

setting the connection as

authorised will mean the

headset will automatically

connect to the handset each

time the headset is powered

on.

- Remove: Allows to delete a

paired Bluetooth device.

- Remove all: Allows to delete

all a paired Bluetooth devices.

• Bluetooth settings

- My visibility: This indicates

whether or not your handset

will be visible to other

Bluetooth devices.

- My name: You can set the

name of Bluetooth device. The

default name is LG KE970.

- My address: You can view the

address of your Bluetooth

device.

Settings

]Network: You can select a

network which will be registered

either automatically or manually.

• Network selection

Usually, the network selection is

set to Automatic.

- Automatic: If you select

Automatic mode, the phone

will automatically search for

and select a network for you.

Once you have selected

“Automatic”, the phone will be

set to “Automatic” even though

the power is off and on.

- Manual: The phone will find

the list of available networks

and show you them. Then you

can select the network which

you want to use if this network

has a roaming agreement with

your home network operator.

The phone let you select

another network if the phone

fails to access the selected

network.

- Preferred: You can set a list of

preferred networks and the

phone attempts to register with

first, before attempting to

This list is set from the phone’s

predefined list of known

networks.

• GPRS attach

You can set GPRS service

depending on various situations.

- Power on

If you select this menu, the

phone is automatically

registered to a GPRS network

when you switch the phone on.

Starting a WAP or PC dial-up

application created the

connection between phone and

network and data transfer is

possible. When you end the

application, GPRS connection is

ended but the registration to

the GPRS network remains.

Settings

- When needed

If you select this menu, the

GPRS connection is established

when you connect a WAP or

application service and closed

when you end the WAP or

applicaion connection.

• Network profile

- Data connections

Name: You can type the

network name.

Bearer: You can set the bearer

data service.

1 Data/2 GPRS

Appears only if you select Data

Settings as a Bearer/service.

Dial number: Enter the

telephone number to dial to

access your WAP gateway.

User ID: The users identity for

your dial-up server

(and NOT the WAP gateway).

Password: The password

required by your dial-up server

(and NOT the WAP gateway) to

identify you.

Call type: Select the type of

data call; Analogue or Digital

(ISDN).

Call speed: The speed of your

data connection; 9600 or 14400

(Depends on Operator)

Linger time: You need to enter

timeout period.

After entering that, the WAP

navigation service will be

unavailable if any data is not

input or transferred.

Primary server: Input the IP

address of the primary DNS

server you access.

Secondary server: Input the

IP address of the secondary

DNS server you access.

Settings

The service settings are only

available when GPRS is chosen

as a bearer service.

APN: Input the APN of the

GPRS.

User ID: The users identify for

your APN server.

Password: The password

required by your APN server.

Primary server: Input the IP

address of the primary DNS

server you access.

Secondary server: Input the

IP address of the secondary

DNS server you access.

]USB connection: You can

choose one mode of Data service

and Mass storage.

When you have finished using the

phone memory, click Exit and take

the following steps.

1. Click on the notification area.

[Unplug or Eject Hardware]

2. Select USB Mass Storage Device,

click on Stop.

The following message will

appear: “The ‘USB Mass Storage

Device’ device can now be safely

removed from the system”

3. Then remove the cable.

Caution

]Before you remove the

cable, it is necessary that

you click Exit. Or, the

integrity of transferred data

is not guaranteed.

Settings

Security settings Menu 0.6

]PIN code request: In this menu,

you can set the phone to ask for

the PIN code of your SIM card

when the phone is switched on.

If this function is activated, you’ll

be requested to enter the PIN

code.

1. Select PIN code request in the

security settings menu, and

then press [OK].

2. Set On/Off.

3. If you want to change the

setting, you need to enter PIN

code when you switch on the

phone.

4. If you enter wrong PIN code

more than 3 times, the phone

will lock out. If the PIN is

blocked, you will need to key in

PUK code.

5. You can enter your PUK code

up to 10 times. If you put wrong

PUK code more than 10 times,

you can not unlock your phone.

You will need to contact your

service provider.

]Phone lock: You can use a

security code to avoid

unauthorized use of the phone.

Whenever you switch on the

phone, the phone will request

security code if you set phone

lock to When switch on.

If you set phone lock to When

SIM changed, your phone will

request security code only when

you change your SIM card.

]Touchpad lock:

]Call barring: The Call barring

service prevents your phone from

making or receiving certain

category of calls. This function

requires the call barring

password. You can view the

Settings

following submenus.

• All outgoing : The barring

service for all outgoing calls.

• Outgoing international:

The barring service for all

outgoing international calls.

• O/G international except

home country: The barring

service for all international

outgoing calls except home

network.

• All incoming: The barring

service for all incoming calls.

• Incoming when abroad: The

barring service for all incoming

calls when roaming.

• Cancel all barrings: You can

cancel all barring services.

• Change password: You can

change the password for Call

Barring Service.

The submenus:

- Activate: Allows to request the

network to set call restriction on.

- Cancel: Set the selected call

restriction off.

- View status: View the status

whether the calls are barred or not.

]Fixed dial number: You can

restrict your outgoing calls to

selected phone numbers. The

numbers are protected by your

PIN2 code.

• On: You can restrict your

outgoing calls to selected phone

numbers.

• Off: You can cancel fixed

dialling function.

• List view: You can view the

number list saved as Fixed dial

number.

Settings

]Change codes: PIN is an

abbreviation of Personal

Identification Number to prevent

use by unauthorized person.

You can change the access codes:

Security code, PIN1 code,

PIN2 code.

1. If you want to change the

Security code/PIN1/ PIN2 code

input your original code, and

then press [OK].

2. Input new Security

code/PIN/PIN2 code and verify

them.

Call settings Menu 0.7

You can set the menu relevant to a

call by pressing [Select] in the

Setting menu.

]Call divert: The Call divert

service allows you to divert

incoming voice calls, fax calls,

and data calls to another number.

For details, contact your service

provider.

• All voice calls: Diverts voice

calls unconditionally.

• If busy: Diverts voice calls

when the phone is in use.

• If no reply: Diverts voice calls

which you do not answer.

• If out of reach: Diverts voice

calls when the phone is

switched off or out of coverage.

• All data calls: Diverts to a

number with a PC connection

unconditionally.

Settings

• All fax calls: Diverts to a

number with a fax connection

unconditionally.

• Cancel all: Cancels all call

divert service.

The submenus

Call divert menus have the

submenus shown below.

- Activate: Activate the

corresponding service.

To voice mailbox

Forwards to message centre.

This function is not shown at All

data calls and All fax calls

menus.

To other number

Inputs the number for diverting.

To favourite number

You can check recent 5 diverted

numbers.

- Cancel: Deactivate the

corresponding service.

- View status: View the status

of the corresponding service.

]Answer mode

• Slide open: If you select this

menu, you can receive an

incoming call when you open

the slide.

• Any key: If you select this

menu, you can receive a call by

pressing any key except

[End] key.

• Accept key only: If you select

this menu, you can receive a call

by only pressing [Send]

key.

]Send my number

(network and subscription

dependent)

• Set by network: If you select

this, you can send your phone

number depending on two line

service such as line 1 or line 2.

Settings

• On: You can send your phone

number to another party.

Your phone number will be

shown on the receiver’s phone.

• Off: Your phone number will not

be shown.

]Call waiting

(network dependent)

• Activate: If you select Activate,

you can accept a waiting

(receiving) call.

• Cancel: If you select Cancel,

you cannot recognize the

waiting (receiving) call.

• View status: Shows the status

of Call waiting.

]Minute minder: If you select On,

you can check the call duration by

a beep sound given every minute

during a call.

]Auto redial: If y

• On: When this function is

activated, the phone will

automatically try to redial in the

case of failure to connect a call.

• Off: Your phone will not make

any attempts to redial when the

original call has not connected.

]Send DTMF tones: You can

send touch tones during an active

call to control your voice mailbox

or other automated phone

services.

Settings

Message settings

Menu 0.8

]Text message

• Message types:

Text, Voice, Fax, Paging,

X.400, Email, ERMES

Usually, the type of message is

set to Text. You can convert

your text into alternative

formats. Contact your service

provider for the availability of

this function.

• Validity period: This network

service allows you to set how

long your messages will be

stored at the message centre.

• Delivery report: If you set to

Yes, you can check whether

your message is sent

successfully.

• Reply charging: When a

message is sent, it allows the

recipients to reply and charge

the cost of the reply to your

telephone bill.

• Message centre number: If

you want to send the text

message, you can receive the

address of SMS centre through

this menu.

• Bearer setting: You can set

the bearer setting such as GSM,

GPRS.

]Multimedia message

• Subject: You can enter

multimedia messages subject

when this menu is on.

• Slide duration: Display the

duration of each page when

writing the message.

• Priority: You can set the

priority of the message you

choose.

• Validity period: This network

Settings

service allows you to set how

long your text messages will be

stored at the message centre.

• Delivery report: If it is set to

Yes in this menu, you can check

whether your message is sent

successfully.

• Read report: You can receive

the report whether the receiver

read the message or not.

• Auto download: If you select

On, you receive multimedia

messages automatically. If you

select Off, you receive only

notification message in the

inbox and then you can check

this notification. If you select

Home network only, you receive

multimedia messages depends

on Homenetwork.

• Network profile: If you select

multimedia message server, you

can set URL for multimedia

message server.

• Permitted message type

Personal: Personal message.

Advertisement: Commercial

message.

Information: Necessary

information.

]E-mail

• Email account:

This menu allows you to edit,

delete or add an email account.

- View: You can see the Email.

- Set as default

- Edit

Account name: Account

name.

Email address: Enter the

email address given to you by

your service provider.

My name: You can make

your nickname.

Settings

Incoming mail server: Enter

the POP3 address and Port

number of the that receives

your email.

User name: Enter your email

ID.

Password: Enter your email

password.

Outgoing mail server: Enter

the SMTP address and Port

number of computer that

sends your email.

- Advanced settings

Protocol type: Choose your

protocol type. (POP3/IMAP4)

Maximum receive size:

View the Maximum size that

you can receive mails.

Save to server: Select Yes

to leave the messages on the

server.

Insert signature: Select Yes

to attach your signature to

your email messages.

Reply email address: Email

address that you can receive

the reply.

Incoming port number:

Allow you to edit POP3 port

number.

Outgoing port number:

Allow you to edit SMTP port

number.

Outgoing mail

authentication: when you

send the mail, you can set

authentication whether or not.

Outgoing server

ID/password: Enter the ID

and password for sending

your email.

Settings

- New account: You can set

up to 5 email accounts by

selecting New account menu.

Using the Edit menu, you can

set the following values.

- Delete: Deletes the selected

account from the list.

- Delete all: You can delete all

account lists.

• Network profile: A profile is

the network information used to

connect to the Internet. There

are default profiles for some

operators, stored in phone

memory. It’s impossible to

rename default profiles.

• Signature: You can make your

signature.

]Voicemail number: You can

receive the voicemail if your

network service provider supports

this feature. When a new

voicemail is arrived, the symbol

will be displayed on the screen.

Please check with your network

service provider for details of their

service in order to configure the

phone accordingly.

]Push message: You can set the

option whether you will receive

the message or not.

]Info message

• Receive

Yes: If you select this menu,

your phone will receive Info

service messages.

No: If you select this menu, your

phone will not receive Info

service messages any more.

Settings

• Alerts

Yes: Your phone will beep

when you have received Info

service message numbers.

No: Your phone will not beep

even though you have received

info service messages.

• Language: You can select the

language you want by pressing

OK key. Then, the info service

message will be shown in the

language that you selected.

WAP settings Menu 0.9

]Network profile: A profile is the

network information used to

connect to the Internet.

There are default profiles for

some operators, stored in phone

memory. It’s impossible to

rename default profiles.

Each profile has submenus as

follows:

• Activate: Activates the

selected profile.

• View: You can see the selected

profile.

• Edit: You can edit the selected

profile.

• New profile: You can add a

new profile.

• Delete: Deletes the selected

profile from the list.

• Delete all: Deletes all profile

from the list.

• Reset all: Allows you to reset

all profiles.

]View style:

]Cache: The information or

services you have accessed are

saved in the cache memory of the

phone.

Settings

]Cookie: Check whether a cookie

is used or not.

]Security certifications: You

can see the list of personal.

Certificates that have been stored

in your phone.

]Show image:

]Javascript:

]Memory in use:

Original settings Menu 0.0

]Reset settings

]Reset phone memory

]Reset all

Memory status Menu 0.*

You can check free space and

memory usage of each repository,

Internal memory and Multimedia

memory. You can go to each

repository menu.

Note

]A cache is a buffer

memory, which is used to

save data temporarily.

Settings

Memory status Menu *.1

Settings Menu *.2

Once this menu has been selected,

simply press the left soft key

[OK] to listen to voice mail. You can

also hold down the key in

standby mode to listen to voice mail.

Help Menu *.3

Note

]When you receive a voice

mail, your phone displays

the icon and you hear an

alert. Please check with

your network provider for

details of their service in

order to configure the

handset correctly.

Voice Mail

Customer Care Center

Menu #.1

Internatinal roaming

Menu #.2

Phone info Menu #.3

Icon glossary Menu #.4

Help

Q&A

Please check to see if any problem

which you may have with your

phone is described here before

taking it for service or calling a

service engineer.

QHow do I view the list of

outgoing calls, incoming calls

and missed calls?

APress .

QConnection is poor or is not

audible in certain areas.

AIn certain areas, signal strength

can vary dramatically. Try

moving to a different location.

Heavy network traffic may

affect the ability to connect, or

the stability of the call.

QConnection is poor even when

established.

AIn certain areas, signal strength

can vary dramatically. Try

moving to a different location.

Heavy network traffic my affect

the ability to connect, or the

stability of the call.

QLCD does not turn on.

ARemove and replace the

battery and turn on the power.

If the phone still does not turn

on, charge the battery and try

again.

QAn echo can be heard during

connection with a certain

telephone in a certain area.

AIt is called ‘Echo Phenomenon’.

It occurs if the volume is too

high or caused by special

properties (semi electronic

telephone exchange) of the

machine on the other end.

QThe phone gets warm.

ADuring long calls, or if

games/Internet are used for a

long time, the phone may

become hot. This is perfectly

normal and has no effect upon

the life of the product or

performance.

QThe bell does not ring, or lamp

or LCD blinks only.

AThe phone is set to ‘Vibrate’ or

‘Silent’ in the Profiles menu.

Please select ‘Normal’ or

‘Loud/.

QStandby duration of the phone

gradually becomes shorter.

ABatteries have a limited life.

When the battery lasts for half

its original time, it requires

replacement.

Only use authorised

replacement parts.

QUsage time of battery becomes

shorter.

AIf the battery time is short, it

may be due to the user

environment, or large volume of

calls, or weak signals.

QNo number is dialed when you

recall a phonebook entry.

ACheck that the numbers have

been saved correctly, by using

the phonebook Search feature.

Resave them, if necessary.

Q&A

QYou cannot be contacted.

AIs your phone switched on

(pressed for more than

three seconds)? Are you

accessing the right cellular

network? Have you set an

incoming call barring option?

QI cannot find the lock, PIN, or

PUK code, or password?

AThe default lock code is ‘0000’.

If you forget or lose the lock

code, contact your phone

dealer. If you forget or lose a

PIN or PUK code, or if you have

not received such a code,

contact your network service

provider.

There are various accessories for your mobile phone. You can select

these options according to your personal communication

requirements.

Accessories

Standard Battery

Travel Adapter

This charger allows you to charge the battery while away

from home or your office.

Data cable/CD

You can connect your phone to PC to exchange the

data between them.

Accessories

Hands free earmicrophone and music

player controller combo

]Stereo headset

]Controller: Answer & End button, music player

control, volume control, Hold button and

microphone.

Note

]Always use genuine LG accessories.

]Failure to do this may invalidate your warranty.

]Accessories may be different in different regions; please check with

our regional service company or agent for further inquires.

LG Electronics USA KF300D Cellular/PCS GSM Phone with Bluetooth User Manual KF300 ENG 1019

LG Electronics USA Cellular/PCS GSM Phone with Bluetooth KF300 ENG 1019

Users Manual

Navigation menu

Namespaces

Views

Navigation