LG Electronics USA KU970 PCS GSM/ EDGE Phone with Bluetooth User Manual KU970 Eng UK

Download:
Mirror Download [FCC.gov]
Document ID	760562
Application ID	iSlvNWZX9fJThu31+8eSfQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.65kB (720625 bits)
Date Submitted	2007-02-19 00:00:00
Date Available	2007-04-16 00:00:00
Creation Date	2006-12-28 11:16:42
Producing Software	Acrobat Distiller 7.0 for Macintosh
Document Lastmod	2007-02-19 13:41:26
Document Title	KU970_Eng(UK)
Document Creator	QuarkXPress: pictwpstops filter 1.0
Document Author:	001

KU970_cover_Eng
2006.12.28
10:49 AM
Page 1
ENGLISH
User Manual
LG KU970
www.lgmobile.com
P/N :
KU970 User Guide
- English
This document is the user guide for the
LG KU970 3G Video Mobile Phone.
All rights for this document are reserved by
LG Electronics. Copying, modifying and
distributing this document without the
consent of LG Electronics are prohibited.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means
the product is covered by the European Directive 2002/96/CE.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased
the product.
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. "
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. if this
equipment does cause harmful interference or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be
free from defects in material and workmanship, according to the following terms and conditions:
(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase
of the product.
(2) The limited warranty extends on to the original purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
(3) This warranty is good only to the original purchaser of the product during the warranty period as
long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.
(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide information to reasonably prove the date of
purchase.
(6) The customer shall bear the cost of shipping the product to the Customer Service Department of
LG. LG shall bear the cost of shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the product in other than its normal and customary
manner.
(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to
moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair,
misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the
fault of LG, including damage caused by shipping blown fuses spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.
(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect
or malfunction of the product during the applicable limited warranty period.
(5) Products which have had the serial number removed or made illegible.
(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by
operations law, statutory or otherwise, including, but limited to any implied warranty of
marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved accessories.
(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to
normal customer use.
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL
NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS
OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF,
OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY
APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental
or consequential damages or limitations on how long an implied warranty lasts; so these limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following web address:
www.lgeservice.com
For Your Safety
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information
carefully for optimal performance and to prevent any damage
to or misuse of the phone. Any changes or modifications not
expressly approved in this user guide could void your warranty
for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the
bathroom, swimming pool, etc.
Always store your phone away from heat. Never store your
phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during extreme
weather conditions or in your car on a hot day. Exposure to
excessive cold or heat will result in malfunction, damage
and/or catastrophic failure.
Be careful when using your phone near other electronic
devices. RF emissions from your mobile phone may affect
nearby in adequately shielded electronic equipment. You
should consult with manufacturers of any personal medical
devices such as pacemakers and hearing aides to determine if
they are susceptible to interference from your mobile phone.
Turn off your phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will
cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on
page 78 before using your phone.
Safety Information
Read these simple guidelines. Breaking the rules may be
dangerous or illegal. Further detailed information is given in this
user guide.
] Never use an unapproved battery since this could damage
the phone and/or battery and could cause the battery to
explode.
] Never place your phone in a microwave oven as it will
cause the battery to explode.
] Do not dispose of your battery by fire or with hazardous or
flammable materials.
] Make sure that no sharp-edged items come into contact
with the battery. There is a risk of this causing a fire.
] Store the battery in a place out of reach of children.
] Be careful that children do not swallow any parts such as
rubber plugs (earphone, connection parts of the phone,
etc.). This could cause asphyxiation or suffocation.
For Your Safety
] Unplug the power cord and charger during lightning storms
to avoid electric shock or fire.
] When riding in a car, do not leave your phone or set up the
hands-free kit near to the air bag. If wireless equipment is
improperly installed and the air bag is activated, you may be
seriously injured.
] Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause fire or
electric shock.
] Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously
damage your phone.
] Do not use a hand-held phone while driving.
] Do not disassemble the phone.
] Do not use the phone in areas where its use is prohibited.
(For example: aircraft).
] Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
] Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
] Never store your phone in temperatures less than- 4°F or
greater than 122°F.
] Do not use harsh chemicals (such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. There is a
risk of this causing a fire.
] Do not drop, strike, or shake your phone severely. Such
actions may harm the internal circuit boards of the phone.
] Do not use your phone in high explosive areas as the phone
may generate sparks.
] Only use the batteries, antennas, and chargers provided by
LG. The warranty will not be applied to products provided by
other suppliers.
] Only authorized personnel should service the phone and its
accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
] Do not hold or let the antenna come in contact with your
body during a call.
] An emergency call can be made only within a service area.
For an emergency call, make sure that you are within a
service area and that the phone is turned on.
] Do not damage the power cord by bending, twisting, pulling,
or heating. Do not use the plug if it is loose as it may cause
a fire or electric shock.
For Your Safety
FCC RF Exposure Information
Body-worn Operation
WARNING! Read this information before operating the phone.
This device was tested for typical body-worn operations with
the back of the phone kept 0.6 inches (1.5cm) between the
user’s body and the back of the phone. To comply with FCC RF
exposure requirements, a minimum separation distance of 0.6
inches(1.5cm) must be maintained between the user's body
and the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Body-worn accessories that cannot maintain 0.6
inches(1.5cm) separation distance between the user's body
and the back of the phone, and have not been tested for typical
body-worn operations may not comply with FCC RF exposure
limits and should be avoided.
In August 1996, the Federal Communications (FCC) of he United
States, with its action in Report and Order FCC 96-326, adopted
an updated safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with
the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
CAUTION
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations. Do not use the phone with a
damaged antenna. If a damaged antenna comes into contact
with skin, a minor burn may result. Contact your local dealer
for a replacement antenna.
10
For Your Safety
Vehicle Mounted External Antenna
(optional, if available)
A minimum separation distance of 8 inches (20cm) must be
maintained between the user/bystander and the vehicle
mounted external antenna to satisfy FCC RF exposure
requirements. For more information about RF exposure, visit
the FCC website at www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must
accept any interference received, including interference that
may cause undesired operation.
Battery Disposal
] Please dispose of your battery properly or bring to your
local wireless carrier for recycling.
] Do not dispose in fire or with hazardous or flammable
materials.
Adapter (Charger) Cautions
] Using the wrong battery charger could damage your phone
and void your warranty.
] The adapter or battery charger is intended for indoor use
only.
Do not expose the adapter or battery charger to direct sunlight
or use it in places with high humidity, such as the bathroom.
Cautions for Battery
] Do not disassemble.
] Do not short-circuit.
] Do not expose to high temperature: 60°C (140°F).]
] Do not incinerate.
11
Table of Contents
Table of Contents
Introduction
For Your Safety
Guidelines for Safe and
Efficient Use
KU970 Features
12
Parts of the phone
How to Use Touch
Keys
16
Getting Started
18
Installing the USIM card
and battery
Charging the Battery
19
Disconnecting the charger
20
How to use a microSD
memory card
21
Turning the handset on/off
22
Access codes
23
Display information
24
General Functions 26
Vodafone live!
Making and answering calls
Entering text
28
Homepage
Enter URL
Changing the text input
mode
29
Using the T9 Modes
Using the ABC Mode
30
Using the 123 (Number) mode
31
Using the symbol mode
Enter address
Recent pages
Overview of Menu
Functions
32
Entertainment
Games & Applications
Mobile TV
Java settings
33
34
Bookmarks
Saved pages
Browser settings
35
Profiles
Security
Character encoding
Scrolling control
Show image
Cache
Cookies
JavaScript
Reset settings
36
Music
Now playing
All tracks
Playlists
Song recognition
Music store
37
Camera
38
41
Messaging
44
Create new
Message
Postcard
Email
Inbox
Drafts
Outbox
Sent messages
Email
Templates
45
46
47
48
49
51
Text templates
Multimedia templates
My Files
Pictures
Sounds
Videos
Game & Applications
Bluetooth data
Other files
External memory
58
59
61
62
Organiser & Tools 63
Alarms
Calendar
Tasks
Memo
Calculator
Converter
65
66
Currency
Surface
Length
Weight
Temperature
Volume
Velocity
68
World time
Voice recorder
67
Table of Contents
Camera
Video recorder
69
live! Studio
Messaging settings
SMS
MMS
E-mail
Info service
Service message
52
54
57
Table of Contents
Contacts
Table of Contents
Add new
Contacts list
Groups
Speed dials
Service dial numbers
Own number
Settings
71
Video call
Settings
72
Profile
Date & time
Language
Security
Power save
Memory status
Handset Information
Reset settings
Display settings
73
All calls
Dialled calls
Received calls
Missed calls
USIM Tool Kit
74
78
79
81
82
83
Main display
Menu style
Font
Backlight
Welcome message
Java settings
Messaging settings
Call settings
Call durations
Call barring
77
Phone settings
View contacts from
Show image/avatar
Copy all
Move all
Clear contacts
Calls
75
During a video call
Incoming video call
84
85
Fixed dial numbers
Data volume
Call costs
Diverts
Call waiting
Voicemail
Video call
Common settings
Contact settings
Connectivity
Bluetooth
Network
Access points
Browser settings
Streaming
Dial-up network
Accessories
Technical data
Index
87
88
91
92
93
97
98
99
100
101
102
103
Introduction
Introduction
Congratulations on your purchase of the
advanced and compact KU970 3G video
mobile phone, designed to operate with the
latest digital mobile communication
technology.
This user’s guide contains important
information on the use and operation of
this phone. Please read all the
information carefully for optimal
performance and to prevent any damage
to or misuse of the phone. Any changes
or modifications not expressly approved
in this user’s guide could void your
warranty for this equipment.
Use of phone cases with magnetic locks
with slide type phones has caused
problems such as loss of network signal
and phones powering off.
KU970 Features
KU970 Features
Parts of the phone
Open view
Earpiece
Internal camera lens
LCD screen
Navigation keys
] In standby mode:
List of Profiles
Contacts list
Messaging
Calendar
] In menu: Navigates menus.
12
] Top: Icons showing signal
strength, battery level and
various other functions
] Bottom: Soft key
indications
Alpha numeric keys
] In standby mode: Input
numbers to dial. Hold down:
for international calls.
to dial voice mail centre.
to
for speed dials.
] In editing mode: Enter
numbers & characters.
KU970 Features
Left soft key/ Right soft key
Performs the function indicated at the bottom of
the display.
Confirm key
Selects menu options and confirms actions.
Clear key
] Clears a character with each press. Hold
the key down to clear all input.
] Use this key to go back to a previous screen.
Send key
] Dials a phone number and answers a call.
] In standby mode: Shows a history of calls
made, received, and missed.
13
KU970 Features
Left side view
Right side view
KU970 Features
Headset/Charger/Cable
connector
Note
Please ensure phone is
powered on and in idle
mode before connecting
the USB cable.
End key
] Switch on/off (hold down)
] End or reject a call.
Side keys
] In standby mode (open):
Key tone volume adjustment
] In standby mode (closed):
Turns the LCD light on.
] In menu: Scrolls up & down.
] During a call: Earpiece volume
adjustment
Note
To protect your hearing
while the slide is open,
maximum volume level is 3.
Micro SD memory card slot
14
Menu key
] Opens the main menu.
] Opens the task manager (Long press).
Music hot key
] Accesses the Music menu. Goes to
MP3 player (whilst playing music).
Rear view
KU970 Features
Mirror
Holes for a carrying strap
Battery release latch
Press this button to
remove the battery.
External
camera lens
Battery terminals
Flash
USIM card
socket
Battery
15
How to Use Touch Keys
] This product’s keys on the slide are touch keys.
How to Use Touch Keys
] Be sure to read “Cautions for Touch Keys” before using touch keys.
Cautions for Touch Keys
1. Make sure your hands are clean and dry.
- Remove all moisture from the surface of
your hands or the touch keys in a humid
environment.
Touch key shortcut
image
Note: You can enable
this feature in the
display settings menu
[Menu #.2.1.1].
Touch keypad
16
2. You do not need to press hard on the
touch keys to make them work normally.
Do not subject the product to severe
impact, as this may damage the touch key
sensors.
3. Use the tip of your finger to press exactly
on the touch key you want, being careful
not to touch the keys for other functions.
4. When both the home screen and touch
key lights are off, pressing a touch key will
not turn on the home screen light. Press
and the home screen light will turn back
on(touch keys do not work when the
touch key lights are off).
5. If the slide is closed and the Touch
Protection function is on, during calls the
Touch key Lock function is automatically
enabled. (For details, see “Touch Key
Status When Using Mobile Phone”.)
- After disabling Touch Protection, if there is
no key action for a certain duration
(3 seconds), the Touch Protection function
is enabled again.
7. Keep metal and other conductive materials
away from the surface of the touch keys, as
contact with them may result in an error.
2. During calls
Touch Key Status When
Using Mobile Phone
When the slide is closed, to prevent
indiscreet action of the touch keys whilst
using the phone or during calls, the Touch
Protection function is automatically enabled.
(In this case, the touch keys will not work
even if they are pressed)
1. When slide is closed
- When the slide is closed, the Touch
Protection function is automatically
enabled. (Opening the slide will
automatically disable it.)
- During calls, regardless of slide status, the
Touch Protection function is automatically
enabled.
- To disable the Touch Protection, press any
key except .
How to Use Touch Keys
6. Touch keys may not work normally if a
mobile phone case or plastic cover is
covering them. Also, touch keys may not
work normally if you are wearing gloves.
- After disabling the Touch key Lock,
if there is no key action for a certain
duration (3 seconds), the Touch Protection
function is enabled again.
Note
For user convenience, the touch key
image with the functions of each touch
key is shown on the home screen when
purchasing products.
- To disable Touch Protection when the slide
is closed, press the volume key twice.
17
Getting Started
Getting Started
Installing the USIM card
and battery
1. Installing the USIM card.
Your USIM card contains your phone number,
service details and contacts and must be
inserted into your handset.
If your USIM card is removed then your
handset becomes unusable (except for
emergency calls) until a valid one is inserted.
Always disconnect the charger and other
accessories from your handset before
inserting and removing your USIM card. Slide
the USIM card into the USIM card holder.
Make sure that the USIM card is properly
inserted and the gold contact area on the
card is facing downwards. To remove the
USIM card, press down lightly and pull it in
the reverse direction.
To insert the USIM card
18
To remove the USIM card
Note
The metal contact of the USIM card can
easily be damaged by scratches. Pay
special attention to the USIM card while
handling. Follow the instructions supplied
with the USIM card.
2. Installing the battery.
Slide the battery upwards until it snaps back
into place.
Charging the Battery
Before connecting the travel adapter to the
phone you must first install the battery.
Press and hold down the battery release
button and slide the battery down.
Getting Started
To remove the battery.
Turn the power off. (If the power is left on,
there is a chance you could lose the stored
telephone numbers and messages.)
1. With the arrow facing you as shown in the
diagram push the plug on the battery
adapter into the socket on the left side of
the phone until it clicks into place.
2. Connect the other end of the travel
adapter to the mains socket.
Note
] Only use the charger included in the box.
19
Getting Started
Getting Started
3. The moving bars on the battery icon will
stop after charging is complete.
4. Ensure the battery is fully charged before
using the phone for the first time.
CAUTION!
• Do not force the connector as this may
damage the phone and/or the travel adapter.
• If you use the battery pack charger when
abroad, use an attachment plug adaptor for
the proper configuration.
• Do not remove your battery or the USIM
card while charging.
WARNING!
• Unplug the power cord and charger during
lightning storms to avoid electric shock or
fire.
• Make sure that no sharp-edged items such as
animal teeth or nails, come into contact with
the battery.
This may cause a fire.
20
Disconnecting the
charger
Disconnect the travel adapter from the
phone as shown in the diagram below.


1. Turn the phone off. Inserting or removing
the microSD when the phone is on may
damage the files stored in the memory
card.
3. Insert the memory card into the slot.
The gold contacts must be kept on the
back of the microSD. Don’t push the
microSD too much. If it doesn't go into
the slot easily, you may be trying to insert
it in the wrong way or there could be a
foreign object in the slot.
Getting Started
How to use a microSD
memory card
4. Once inserted, push the memory card until
you hear a Click, meaning that the
microSD has been correctly engaged.
2. Lift the plastic cover which protects the
microSD slot.
5. Close the plastic slot protection.
6. To remove the memory card, turn the
phone off, open the slot protection and
push the microSD to unlock it. Carefully
extract the memory card.
21
Getting Started
Getting Started
22
Attention:
] Avoid using the Flash Memory Card when
the battery is low.
When writing to the card, wait for the
operation to complete before removing
the card.
The card is designed to fit easily into the
system one way only.
Do not bend the card or force it into the slot.
Do not insert any memory cards other than
those made by microSD.
If the microSD has been formatted using
FAT32, format the microSD using FAT16
again.
insert the memory card for the first time.
During formatting various folders will be
created for different data types.
Turning the handset
on/off
Turning your handset on
For more information on the microSD, please
refer to the memory card instruction manual.
Ensure that your USIM card is in your
handset and the battery is charged. Press and
hold until the power comes on. Enter the
USIM PIN code that was supplied with your
USIM card if the PIN code request is set to
On. (Note: Please refer to page 79)
After a few seconds you will be registered on
the network.
Memory card formatting
Turning your handset off
Before you start to use the memory card you
have to format it. After you insert the
memory card, select Menu > Settings >
Phone settings > Memory status > Format
external memory, then press . This
operation should only be done when you
Press and hold until the power goes off.
There may be a few seconds delay while the
handset powers down.
Do not turn the handset on again during this
time.
PUK code (4 to 8 digits)
You can use the access codes described in
this section to avoid unauthorised use of
your phone. The access codes (except the
PUK and PUK2 codes) can be changed by
using the Change codes feature [Menu
#.1.4.3].
The PUK (PIN Unblocking Key) code is
required to unblock a blocked PIN code. The
PUK code may be supplied with the USIM
card. If not, contact your network operator’s
customer service department for the code. If
you lose the code, contact your network
operator’s customer service department.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number)
code protects your USIM card against
unauthorised use. The PIN code is usually
supplied with the USIM card. When the PIN
code request is set to On, your phone will
request the PIN code every time it is
switched on. When the PIN code request is
set to Off, your phone connects to the
network directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM
cards, is required to access functions such as
Fixed dial number. These functions are only
available if supported by your USIM card.
Getting Started
Access codes
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some USIM
cards, is required to unblock a blocked PIN2
code. If you lose the code, contact your
network operator’s customer service
department.
Security code (4 to 8
digits)
The security code prevents unauthorised use
of your phone. The default security code is
set to ‘0000’ and the security code is
required to delete all phone entries and to
restore the handset to the factory settings.
23
Getting Started
Getting Started
Display information
Idle screen
No USIM idle screen
The idle screen appears when you have
installed a proper USIM card and turned the
phone on.
This is the initial screen of the phone that
appears when there is no USIM card installed
in the phone, or the installed USIM card is
invalid. In this screen, users can only make
emergency calls, and turn the phone off. To
turn the phone off, press and hold down
for a few seconds.
Idle screen consists of the operator's name,
indicators, date and time on a background
image. You can change the wallpaper in the
Display settings menu.
Screen structure
Numbering screen
If there is no USIM card installed, an
animation telling you to insert a USIM card
appears. If the USIM card inserted into the
phone is invalid, an animation telling you that
the USIM card is locked appears.
The numbering screen appears when a
number key is pressed in the idle screen.
Emergency call function
The right soft key is represented by
“Emergency” on the screen. Press the right
soft key or dial your emergency number
using the number keys, and then press to
make an emergency call.
24
Screen structure
Screen structure
The numbering screen consists of status
indicators, dialled number and soft menu.
Status indicators are the same as those of
the idle screen. You can change the size and
colour of the dialling font in the Display
settings menu. You can make a call while
dialling a phone number by pressing .
Unlock function
You can use the soft keys for several
functions while dialling a number. Using the
left soft key, you can make a video call, send
a message to the number, save the number to
Contacts.
If you press , a popup screen appears
asking you to input the Security code to
unlock the phone. The Security code is
configured in the Change codes (#. Settings
> 1. Phone settings > 4. Security > 3. Change
codes). If you key in an incorrect Security
Code, the phone will remain in Handset lock
status. If you key in the correct Security
code, the phone will be unlocked, and the
idle screen will be displayed. If you have
turned the phone off in the Handset lock
status, you will find the phone remains in
Handset lock status when you turn it on.
Handset lock screen
When the Handset lock function is selected,
you can only make an emergency call, release
the lock, and turn off the phone in this
screen. As always, you can turn the phone off
by pressing and holding for a few seconds.
Screen structure
The screen structure of the Handset lock
screen is the same as that of the idle screen,
except that the lock message appears instead
of the idle screen.
Emergency call function
You can make an emergency call using the
right soft key. As with the No USIM idle
screen, only emergency numbers can be
dialled.
Getting Started
Soft key
Barring password
This service obstructs calling service in some
conditions. This condition can be edited
using the Call barring feature (#. Settings >
5. Call settings > 2. Call barring). The barring
password is required when you use the call
barring function. The password is obtained
from your network operator's customer
service when you subscribe to this service.
While this service is activated, the caller will
hear the information message that the call is
25
General Functions
General Functions
Making and answering calls
Making a voice call
1. Enter the number including the full area
code.
To delete a digit press .
To delete all digits press and hold .
2. Press to make the call.
3. Press to finish the call, or close the
handset.
Making a video call
You can make a video call in a 3G covered
service area. If the called user has a 3G video
phone in a 3G covered service area, the call
will be established. You can also answer a
video call for video incoming call. To
make/answer a video call, do the following.
1. Input the phone number using the keypad,
or select the phone number from the calls
made/received lists.
Note
To activate the speakerphone during a
call, activate the touch keys and press .
Making a call from the call logs
1. In standby mode, press and the latest
incoming, outgoing and missed phone
numbers will be displayed.
2. Select the desired number by using / .
3. Press
26
to call the number.
To correct mistakes, press briefly to
delete the last number, or press and
hold
to delete all numbers.
2. If you do not want to use the
speakerphone, ensure you have the
headset plugged in.
3. To start the video function, press the left
soft key [Options] and select Make video
call.
You will be notified that you will need to
close other applications to make the
video call.
Making international calls
1. Press and hold for the international
prefix. The ‘+’ character prefixes the
international access code.
The video call may take some time to
connect. Please be patient. The
connection time will also depend on how
quickly the other party answers the call.
While the video call is connecting, you
will see your own image; after the other
party has answered, their image will be
displayed on the screen.
4. Adjust the camera position if necessary.
5. Press to finish the call, or close the
handset.
Making a voice/video call from
Contacts
It is easy to call anyone whose number you
have stored in your Contacts.
1. Press
to access the contacts list.
2. Scroll to the contact to make a call.
3. Press to make a voice call. Press the left
soft key and select Make video call to
make a video call.
4. Press
2. Enter the country code, area code, and
the phone number.
3. Press
General Functions
Note
Adjusting the volume
During a call, if you want to adjust the
earpiece volume, use on the left side of
the phone. In idle mode, you can adjust the
key volume using .
Answering a call
When you receive a call, the phone rings and
the flashing phone icon appears on the
screen. If the caller can be identified, the
caller’s phone number (or name if stored in
your Contacts) is displayed.
to finish the call.
27
General Functions
General Functions
1. Open the slider to answer an incoming
call.
Note
] To reject an incoming call, press or the
right soft key twice.
] If you set Answer mode as Press send
key (Menu #.5.0.4), you can answer
the call by pressing after opening the
slider.
] If the answer mode is set to Press any
key, any key will answer a call except for
2. End the call by closing the handset or
pressing .
Note
28
You can answer a call while using the
Contacts or other menu features.
When the compatible headset is
connected, you can also answer a call
using the headset key, as well as using
the phone. To reject an incoming call,
press .
You can mute the ringtone when a call
comes in by pressing and holding the
volume down side key.
Shortcut to activate vibrate
mode
You can activate the vibrate only mode by
pressing and holding down after opening the
phone.
Signal strength
You can check the strength of your signal by
the signal indicator ( ) on the LCD screen
of your phone. Signal strength can vary,
particularly inside buildings. Moving close to
a window may improve reception.
Entering text
You can enter alphanumeric characters
using the keypad.
For example, storing names in Contacts,
writing a message, creating a personal
greeting or scheduling events in the calendar
all require entering text.
The following text input methods are
available with the handset.
This mode lets you enter words with only
one keystroke per letter. Each key on the
keypad has more than one letter. The T9
mode automatically compares your
keystrokes with an internal dictionary to
determine the correct word, thus requiring
far fewer keystrokes than the traditional
ABC mode. This is sometimes known as
predictive text.
ABC mode
This mode lets you enter letters by
pressing the key labelled with the required
letter once, twice, three or four times until
the letter is displayed.
123 mode (Number mode)
Type numbers using one keystroke per
number. To change to 123 mode in a text
entry field, press
until 123 mode is
displayed.
Changing the text input mode
1. When you are in a field that allows
characters to be entered, you will notice
the text input mode indicator in the upper
right corner of the LCD screen.
2. Press
to cycle between T9Abc,
T9abc, Abc, abc and 123.
General Functions
T9 mode
Using the T9 Mode
The T9 predictive text input mode allows you
to enter words easily with a minimum number
of key presses. As you press each key, the
handset begins to display the characters that
it thinks you are typing based on a built-in
dictionary. As new letters are added, the word
changes to reflect the most likely candidate
from the dictionary.
1. When you are in the T9 predictive text
input mode, start entering a word by
pressing to . Press one key per letter.
29
General Functions
General Functions
The word changes as letters are typed.
Ignore what’s on the screen until the
word is typed completely.
If the word is still incorrect after typing
completely, press once or more to
scroll through the other word options.
Example
Press
Press
to type Good.
to get Home.
If the desired word is missing from the
word choices list, add it by using the
ABC mode.
2. Enter the whole word before editing or
deleting any keystrokes.
3. Complete each word with a space by
pressing .
To delete letters, press . Press and hold
down to erase entire words.
30
Using the ABC Mode
Use
to
to enter your text.
1. Press the key labelled with the required
letter:
Once for the first letter.
Twice for the second letter.
And so on.
2. To insert a space, press once. To
. Press and
delete letters, press
hold down
to clear the display.
Refer to the following table for more
information on the characters available
using the alphanumeric keys.
Characters in the order display
Lower case
.,?!1
Upper case
.,?!1
a b c 2 à á â ã ä å æ ç ABC2ÀÁÂÃÄÅÆÇ
def3èéêë
DEF3ÈÉÊË
ghi4ìíîï
GHI4ÌÍÎÏ
jkl5£
JKL5£
m n o 6 ñ ò ó ô õ ö ø oe M N O 6 Ñ Ò Ó Ô Õ Ö Ø OE
pqrs7ß$
PQRS7ß$
tuv8ùúûü
TUV8ÙÚÛÜ
wxyz9
WXYZ9
Space, 0
Space, 0
Using the 123 (Number) mode
The 123 mode enables you to enter numbers
in a message(a telephone number, for
example). Press the keys corresponding to
the required digits before manually switching
back to the appropriate text entry mode.
General Functions
Key
Using the symbol mode
The symbol mode enables you to enter
various symbols or special characters. To
enter a symbol, select Options > Insert >
Symbol. Use the navigation and numeric keys
to select the desired symbol and press
Note
The characters assigned to the keys and
their order of appearance depends on
the language selected using the option
Input method. The table above provides
the characters set for English language.
31
Overview of Menu Functions
Overview of Menu Functions
You can launch a menu by pressing
press to go into the sub menu.
From the main menu you can also go into a submenu by directly pressing the corresponding
numeric key as follows. The main menu consists of the following top menus and sub menus.
1. Entertainment
1.1 Games & Applications
1.2 Mobile TV
1.3 Java settings
4. Camera
4.1 Camera
4.2 Video recorder
5. Messaging
2. Vodafone live!
2.1 Homepage
2.2 Enter URL
2.3 Bookmarks
2.4 Saved pages
2.5 Browser settings
*2.6 Mobile TV
*2.7 Music
*2.8 Games
*2.9 Ringtones
*2.0 Pictures
*2. News
*2.# Sport
3. Music
3.1 Now playing
3.2 All tracks
3.3 Playlists
*3.4 Song recognition
3.5 Music store
32
in the idle screen. Move to the desired item and
5.1 Create new
5.2 Inbox
5.3 Drafts
5.4 Outbox
5.5 Sent messages
5.6 Email
5.7 Templates
*5.8 live!Studio
5.9 Messaging settings
6. My Files
6.1 Pictures
6.2 Sounds
6.3 Videos
6.4 Games&Applications
6.5 Bluetooth data
6.6 Other files
6.7 External memory
* : Shown only if supported by the service provider
7. Organiser & Tools
7.1 Alarms
7.2 Calendar
7.3 Tasks
7.4 Memo
7.5 Calculator
7.6 Converter
7.7 World time
7.8 Voice recorder
8. Contacts
8.1 Add new
8.2 Contacts list
8.3 Groups
8.4 Speed dials
8.5 Service dial numbers
8.6 Own number
8.7 Settings
9. Calls
9.1 All calls
9.2 Dialled calls
9.3 Received calls
9.4 Missed calls
. USIM Tool Kit
/Alarms(if SAT not
supported by USIM)
0. Video Call
#. Settings
#.1 Phone settings
#.2 Display settings
#.3 Java settings
#.4 Messaging settings
#.5 Call settings
#.6 Contact settings
#.7 Connectivity
Entertainment [Menu 1]
Games & Applications
Adding a new profile
You can easily download games and other
applications in this menu. It has two folders,
Games and Applications, as default. Each
folder has an embedded link for downloading
games or applications. Please note that
additional costs may be incurred when using
online services. You can create a folder using
the left soft key [Options].
Mobile TV
Menu 1.2
You can access Mobile TV by selecting this
menu.
Java settings
Menu 1.3
Activating a profile
1. Select Add new from the Options menu.
The following items need to be configured.
Service name
Enter an account name for the profile.
Connection
mode
Choose from the given list of
connection modes. (Default is TCP
with Proxy)
IP address
Enter the WAP Gateway IP address
provided by the operator. (e.g. 195.
115. 025. 129)
Proxy server
port
Port details are provided by the
operator, depending upon the
Connection mode.
Access point
Choose from the given list of access
points. (For more details on adding or
editing a new access point, refer to
page 98.)
Entertainment
Menu 1.1
2. Press the right soft key [Done] to save any
configuration changes.
You can edit or delete a profile by selecting
Edit and Delete from Options menu.
1. Move the cursor to the profile which you
would like to activate.
2. Press
or select Activate from the
Options menu.
33
Vodafone live! [Menu 2]
Vodafone live!
Homepage
Menu 2.1
You can launch the web browser and access
the homepage of the web service provided
by Vodafone.
You can also directly access Vodafone live!
by pressing the right soft key in idle mode.
Enter URL
Menu 2.2
Enter address
(Menu 2.2.1)
You can manually enter a URL address and
access the associated web page.
Menu 2.3
You can store frequently accessed or
favourite URLs/Pages. Open, Send, Add
new, Edit, Mark/Unmark or Delete
operations can be performed on Bookmarks.
Several preconfigured URLs are stored as
bookmarks.
Adding a new bookmark
1. Press the right soft key [Add].
2. Enter the title and associated URL
information.
3. Press the right soft key [Done] to save.
To enter a symbol, press or the right
soft key [Symbol] to display the Symbol
table.
Connecting to a desired bookmark
Press
or select Open from the Options
menu.
To switch input mode, press
Sending the bookmark to others
Select Send from Options menu. You can
send it via Message or Email.
Recent pages
(Menu 2.2.2)
Shows the recently-browsed pages.
34
Bookmarks
Deleting a bookmark
Select Delete from Options menu. You can
delete multiple bookmarks using the
Mark/Unmark option.
Menu 2.4
The phone can save the page on display as
an offline file. Up to 20 pages can be saved.
Browser settings
(Menu 2.5.1)
Select the appropriate profile by pressing
. This will activate the profile to initiate
the browser launch.
Security
Secure (WTLS/TLS) session data can be
cleared using this option. Session data
should be cleared to establish a new secure
session.
Menu 2.5
You can change the settings for browser
display, security, and certificates.
Profiles
Session clear
Character encoding
Vodafone live!
Saved pages
(Menu 2.5.3)
Sets the browser default character set to one
of the following:
Automatic, English(ASCII), English(ISO),
English(LATIN), Unicode(UCS2 BE),
Unicode(UCS2 LE), Unicode(UCS2 Auto),
Unicode(UTF-16 BE), Unicode(UTF-16
LE), Unicode(UTF-16 Auto), Unicode(UTF8).
(Menu 2.5.2)
Certificates
Scrolling control
If stored, a list of root/ca certificates required
for WTLS/TLS can be found here.
Certificates can be viewed from the list.
Allows you to set the scroll speed by
selecting the number of lines to scroll.
Select one from Small(1 line),
Medium(2 lines), Large(3 lines).
(Menu 2.5.4)
35
Vodafone live!
Show image
(Menu 2.5.5)
Vodafone live!
Allows you to enable or disable the image
display during browsing.
Note
Enabling this function will delay displaying
images until the completion of
transmission. Disabling this function will
prevent the browser from downloading
images from the server, thus allowing faster
transmission.
Cookies
JavaScript
(Menu 2.5.6)
Enabling Cache allows you to store accessed
pages to your phone. Once a page has been
stored in the Cache it will greatly enhance
the page loading speed on subsequent
browsing of the same page.
36
(Menu 2.5.8)
Select whether to turn JavaScript On or Off.
Reset settings
Cache
(Menu 2.5.7)
Enabling Cookies allows you to store cookies
sent from the server. Disabling this function
will prevent cookies from being stored on
your phone.
(Menu 2.5.9)
Select this to reset your phone to its default
browser configuration.
Music [Menu 3]
Menu 3.1
This menu will be activated when there are
some tracks currently played.
Music store
Menu 3.5
Connects to the Vodafone music download
site.
Music
Now playing
Note
All tracks
Menu 3.2
You can view the entire music files in the
phone/external memory.
Playlists
Additional charges may be incurred when
downloading music.
Contact your service provider for further
information.
Menu 3.3
You can create your own playlists by
choosing tracks from the All tracks menu list.
Song recognition
Menu 3.4
Selecting this menu starts dialling a number
for song recognition. For further information,
please contact your service provider.
37
Camera [Menu 4]
Camera
Camera
Menu 4.1
This application enables you to take a still picture. You can take a picture in the size you want,
and use it for the address book photo, home screen and other more general purposes.
Once taken, the picture can be sent by Message, Postcard, Email or Bluetooth.
Displays the current
camera settings.
You can switch the camera
to activate either Internal
or External using the right
soft key.
You can switch between
camera and the video
recorder using / .
Press the
to take a picture.
1. Press the left soft key to access Options and set the desired environment as follows.
38
Move between the options menus with
Select the desired value with
[Select] or .
and confirm the selection with the left soft key
Go to
White
balance
You can adjust the tone of the
background photo according to the
weather.
Auto, Daylight, Cloudy, Illuminate,
Indoors
Night mode
You can take better pictures at night
by selecting On.
Size
1600x1200 (
), 1280x960 (
),
640x480 (
), 320x240 (
),
Wallpaper (
), 176x144 (
),
Contact (
Frame Shot
You can apply one of 9 frame effects
when taking a picture.
(available only in case of Wallpaper
size)
Quality
Super fine (
Standard (
Timer
Effect
You can delay the camera shutter time.
None, 3 seconds, 5 seconds, 10
seconds
“
” is shown when the timer is
activated.
None, Black & White, Negative, Sepia
One, Three ( ), Six ( ), Nine ( )
(Note: Available multishot depends on
the size.)
Sound
Select the desired shutter sound.
Memory
Select the desired memory, either
Handset or External.
x1 ( ), x2 (
) (Note: Available
zoom level depends on the size.)
] You can zoom in with
/ zoom
out with in preview mode.
Mirror
You can activate the mirror effect by
selecting On.
Switch
You can switch the camera to activate
either the Internal or the External
camera.
Preview Style
Normal, Full screen
Light
Multishot
Zoom
Brightness
), Fine (
),
Off , Always on ( ), When taking
( )
] You can turn the camera light
on/off with
in preview mode.
From –2.0 to 2.0 at 0.5 intervals. The
higher the level, the brighter the
screen.
] You can adjust the brightness using
in preview mode.
Camera
The Pictures folder is launched and
displays existing pictures as
thumbnails.
You can view pictures by pressing .
You can also send the selected picture
to another party via Message,
Postcard, Email or Bluetooth.
39
Camera
2. After finishing all the settings, press the right soft key [Close].
Camera
3. Focus the camera on what you want to take and press
4. Press
to save the picture. It is saved in the Pictures folder of My Files.
You can directly send the picture via Message, Postcard, Email or Bluetooth by
pressing the right soft key [Send].
Note
Press
40
to go back to the preview mode without saving the picture.
Menu 4.2
This application enables you to record a video clip. You can play and watch a saved video file in
this menu. Once recorded, a video clip can be sent by Message, Email or Bluetooth.
Camera
Video recorder
Displays the current
camera settings.
You can switch the camera
to activate either Internal
or External using the right
soft key.
You can switch between
camera and the video
recorder using / .
Press the
video clip.
to record a
1. Press the left soft key to access Options and set the desired environment as follows.
Move between the options menus with
Select the desired value with
[Select] or .
and confirm the selection with the left soft key
41
Camera
Go to
Camera
Size
Quality
Light
Zoom
Brightness
42
The Videos folder is launched and
displays existing videos as thumbnails.
You can view videos by pressing
You can also send the selected video
to another party via Message, Email or
Bluetooth.
320x240 (
), 176x144 (
),
128x96 (
Super fine (
Standard (
), Fine (
),
Off, Always on ( ), When recording
( )
] You can turn the camera light
on/off with in preview mode.
x1 ( ), x2 (
) (Note: Available
zoom level depends on the size.)
] You can zoom in with / zoom out
with
in preview mode.
From –2.0 to 2.0 at 0.5 intervals. The
higher the level, the brighter the
screen.
] You can adjust the brightness using
in preview mode.
White balance
You can adjust the tone of the
background video according to the
weather.
Auto, Daylight, Cloudy, Illuminate,
Indoors
Night mode
You can take better shots at night by
selecting On.
Effect
None, Black & White, Negative, Sepia
Duration
Select the desired recording time.
Message, 30 seconds, 1 minute, 2
minutes, 5 minutes and 60 minutes
Memory
Select the desired memory, either
Handset or External.
Mirror
You can activate the mirror effect by
selecting On.
Sound
Decide whether to record the sound
or not.
Switch
You can switch the camera to activate
either Internal or External.
2. After finishing all the settings, press the right soft key [Close].
to start recording.
Camera
3. Focus the camera on what to record and press
And press
to stop recording.
You can pause the recording by pressing the right soft key [Pause].
4. Press
to save the video clip. It is saved in the Videos folder of My Files.
You can directly send the video clip via Message, Email or Bluetooth by pressing the right
soft key [Send].
Note
Press
to go back to the preview mode without saving the video clip.
43
Messaging [Menu 5]
Messaging
Create new
Message
Menu 5.1
(Menu 5.1.1)
You can write and edit a message containing
a combination of text, image, video and
audio.
1. Enter your message in the Message field.
Option menus in Message field
Insert: You can perform the following
actions:
1. Pictures: You can insert an image.
(One image per slide)
2. Take Picture: The camera module
opens and you can take a picture. The
picture is then inserted in the message
window. (One picture per slide).
3. Videos: You can insert a video clip.
(One video clip per slide)
44
4. Take Video: The video recorder
module opens and you can record a
video. The recorded video is inserted
in the message. (One video clip per
slide)
5. Sounds: You can insert a sound file.
(One sound per slide)
6. Record Sound: The voice recorder
module opens and you can record a
sound. The recorded sound is inserted
in the message. (One sound per slide)
7. Contact details: You can add a name
and/or a number stored in the
Contacts. Make your selection to send
either the Name, Number or Name &
Number and press
. The Contacts
list opens and you can search the
desired contact to be inserted.
8. Templates: You can insert a text
template saved on the phone. After
selecting one, press
. The selected
template is inserted into the Message
window.
9. Cc: Select this to insert Cc.
0. Subject: Select this to insert a
subject.
. New slide: Select this to add a new
slide.
#. Symbol: You can insert symbols.
After entering the corresponding
number keys, press
] Add recipients: You can add recipients
] Save to drafts: Saves the message to drafts.
] Cancel: Select this to cancel editing.
Send: Select this to send the created
message.
Save to drafts: Select this to save the
message to drafts.
3. Press the right soft key [Send] to send the
message. The message will automatically
be saved in the Sent messages folder. If
the message has not been sent, it will
remain in the Outbox with a failed status.
Input method: Select the desired
dictionary mode.
Postcard
Add to dictionary: You can add a word
to the dictionary.
Cancel: Select this to cancel editing.
2. Press the right soft key [Continue]. You
can add recipients from Contacts or enter
the number directly. (You can enter up to
10 numbers.)
Option menus in To field
] Add recipients: You can add recipients
from your Contacts or enter the number
directly.
Messaging
from your Contacts or enter the number
directly.
(Menu 5.1.2)
(Note: This service is not available in all countries. Please
contact your service provider for further information.)
1. Key in a message.
2. Press the right soft key [Insert]. You can
insert a stored image or newly taken
picture.
3. After an image is inserted, the format will
be changed to Postcard format.
4. Fill out the fields: Name, Additional info,
Address, Post code, City, State, Country.
5. Press the right soft key [Send] to send the
created postcard.
] Send: Select this to send the message.
45
Messaging
Email
(Menu 5.1.3)
Messaging
To send/receive an email, you should set up
the email account. (Refer to page 54-56 for
how to set up an Email account.)
1. Enter the email addresses of the recipients
in the To, Cc, Bcc fields. You can search
the Contacts by pressing
2. Move the cursor to the Subject field and
key in the subject.
3. You can enter the message contents by
moving the cursor to the Message field.
4. Use the following functions by using the
left soft key [Options].
Insert: Select this menu to insert special
characters, templates, and contacts. It is
also possible to attach multimedia files
(pictures, videos and sounds).
Add recipients: Select this menu to
insert email addresses saved in Contacts.
(Only shown in Option menu when
cursor is located in To/Cc/Bcc fields.)
Send: Sends the created email.
Save to drafts: Select this menu to save
the message in Drafts.
Preview: You can preview the created
email before sending it.
View attachment: Shows the attached
files. (This item is only available when
some files have been attached.)
Note
• Enter the reference email address to
forward the email in Cc(Carbon copy)
field.
• Enter a hidden reference email address to
forward the email without forwarding
information in Bcc(Blind Carbon Copy)
field.
• Only valid email addresses are allowed for
the recipient (To), reference address (Cc)
and hidden reference address (BCC)
fields. When an email address has been
specified, another field where you can
specify another address appears. You can
specify up to 20 recipients for the To
and Cc address fields and 10 recipients
for the BCC address field.
46
Input method: Select the desired
dictionary mode.
Add to dictionary: You can add a new
word to the dictionary.
Set mail priority: You can configure the
priority of the email you wish to send.
Cancel: Exits the email composer.
5. When you have finished writing an email,
press the right soft key [Send] to send
the email.
Inbox
Menu 5.2
1. You can view saved messages. Select a
message and then press
to view the
message.
2. You can view the previous or next message
by using
3. To view a multimedia message
(Notification), select Retrieve in the
message notification view screen. Then the
file is transmitted, and you can view the file
when the transmission is complete.
You can use the following functions by using
the left soft key [Options] in the Inbox.
View: Opens the selected message.
Reply: Creates a reply to the sender or
all recipients of the selected message.
Forward: Forwards the selected message.
Messaging
Note
Not supported for multimedia message
(Notification) and WAP push messages.
Make video call: You can make a video
call.
Delete: Deletes the current message.
Create new message: You can write a
new message or an Email.
Mark/Unmark: You can select one or
more messages for multiple deletion.
Filter: Displays messages by desired
message types.
Copy: In case of SMS, you can copy the
message into handset or USIM.
Move: In case of SMS, you can move the
message into handset or USIM.
47
Messaging
Messaging
Message info.: You can check the
message type, date and time and where
it is saved.
Note
You can check the saved Emails in Email
[Menu 5.6].
Drafts
Menu 5.3
You can view saved messages. Select a
message and then press
to edit the
message.
You can use the following functions by using
the left soft key [Options].
48
Edit: You can edit messages.
Delete: Deletes the selected message.
Create new message: You can write a new
message or an Email.
Mark/Unmark: You can select one or
more messages for multiple deletion.
Filter: Displays messages by desired
message types.
Message info.: You can check the message
type, date and time and where it's saved.
Outbox
Menu 5.4
The Outbox is a temporary storage place for
messages waiting to be sent. Failed messages
are also placed in Outbox. For example,
Emails will be placed in Outbox if the Email
account is not correctly configured.
1. Select a message and then press
view the message.
to
2. You can use the following functions by
using the left soft key [Options].
[For sending / waiting messages] /
] Create new message: You can write a new
message or an Email.
Cancel: You can stop sending/waiting
status.
Message info.: You can check the message
type, date and time and where it's saved.
[For sending a failed message]
] Resend: Resends the selected message.
Forward: Forwards the selected message.
Edit: You can edit the selected message.
Delete: Deletes the current message.
Create new message: You can write a new
message or an Email.
Mark/Unmark: You can select one or
more messages for multiple deletion.
Mark/Unmark: You can select one or
more messages for multiple deletion.
Filter: Displays messages by desired
message types.
Message info.: You can check the message
type, date and time and where it's saved.
Copy: In case of SMS, you can copy the
message into handset or USIM.
Move: In case of SMS, you can move the
message into handset or USIM.
Message info.: You can check the message
type, date and time and where it is saved.
Sent messages
Menu 5.5
Shows the messages you sent (Message/
Postcard/ Email).
[Options]
] View: Opens the selected message.
Reply: Creates a reply to sender or all
recipients of the selected message.
Forward: Forwards the selected message.
Delete: Deletes the current message.
Edit: You can edit the selected message.
Create new message: You can write a new
message.
Save number: Save the sender's number.
Email
Messaging
Menu 5.6
Viewing email message list
1. Select an email account and then press
to view the received email list.
2. Using the right soft key [Retrieve], you
can retrieve a new email list from the email
server of the selected account.
3. In email list, you can use the following
functions by using the left soft key
[Options].
49
Messaging
Messaging
View: Opens selected email.
Reply: Creates a reply to the selected
email.
Forward: Forwards the selected email
message to others.
Retrieve: Retrieves new email messages.
Delete: Deletes the email.
Create new message: Creates a new
message or Email.
Save address: Save sender's address to
Contacts.
Mark/Unmark: Use mark/unmark
option for multiple deletion.
3. You can view the contents of the previous
or next email by using
4. In the email View screen, you can select
the following functions by using the left
soft key [Options].
Reply: Creates a reply to the selected
email.
Forward: Forwards the selected email
message to others.
Delete: Deletes the email.
Save address: Saves the sender's
address to Contacts.
Set as read/unread: You can set the
selected email to read or unread.
Create new message: Creates a new
message.
Message info.: Brief information on the
message including size, type, date, time
and filenames.
Use: Extracts the number, email address
or Web address from email message.
View attachment: Shows the attached
file.
View to address: Shows the email
addresses of the recipients and
reference (Cc).
Viewing an email message
1. Select one of the received emails and
press the Open key to receive the
contents of the email.
50
2. The contents of the received email are
automatically displayed in the View screen.
]
Templates
Text templates
Menu 5.7
(Menu 5.7.1)
You can add, edit, and delete frequently
used useful phrases using the left soft key
[Options].
Note
Depending on your service provider, useful
phrases are saved as a default.
Multimedia templates
(Menu 5.7.2)
You can create, edit and view available
templates when creating multimedia
messages. Five types of template (Birthday,
Greeting, Holiday, Thanks, Sorry) are saved
by default.
The following options are available.
Add new: You can create a new multimedia
template.
Write multimedia message: Creates
a multimedia message with the selected
template.
View: Displays the selected template.
Edit: Edits the selected template.
Delete: Deletes the selected template.
(Not available for default five templates)
Messaging
Message info.: Brief information on the
message including size, type, date, time
and filenames.
live! Studio
Menu 5.8
(Note: This service is not available in all countries. Please
contact your service provider for further information.)
Accesses the remote media album.
Messaging settings
SMS
Menu 5.9
(Menu 5.9.1)
You can configure text message related
options.
1. Text message centre: Input the address
of the Text message centre.
2. Delivery report: By enabling this option,
you can verify whether your message has
51
Messaging
been sent successfully.
Messaging
3. Validity period: This network service
allows you to set how long your text
messages will be stored at the message
centre.
4. Message types: Text, Voice, Fax, X.400,
Email
Usually, the type of message is set to Text.
You can convert your text into alternative
formats. Contact your service provider for
the availability of this function.
5. Character encoding: Auto/ Default
alphabet/ Unicode.
52
Auto(default): Message with single
byte character is normally encoded in
Default alphabet(GSM7). Message with
double-byte character is automatically
encoded in unicode(UCS2).
Default alphabet: Message with even
double byte character is encoded in
single byte. Please note that double
byte characters with accent may be
converted into single byte character
without accent.
Unicode: Message is encoded in double
byte. Please note that you may be
charged double.
6. Send long text as: Select a long text
message as Multiple SMS or MMS.
MMS
(Menu 5.9.2)
You can configure Multimedia message
related options.
1. Retrieval mode: You can set the retrieval
mode using Home network and Roaming
network respectively. If you select
Automatic, you will receive multimedia
messages automatically. If you select
Manual, you will only receive a notification
message in the inbox and then you can
decide whether to download multimedia
messages or not.
2. Delivery report: Allows you to determine
whether to request a delivery confirmation
mail to a recipient, and whether to allow
sending a delivery confirmation mail to a
sender.
Request report: Determines whether to
request a delivery confirmation mail for a
Multimedia message.
Allow report: Determines whether to
allow sending a delivery confirmation mail
for a delivery confirmation mail request.
3. Read reply: Allows you to determine
whether to request a read confirmation
mail to a recipient, and whether to allow
sending a read confirmation mail to a
sender.
Request reply: Determines whether to
request a read confirmation mail for a
Multimedia message.
Allow reply: Determines whether to allow
sending a read confirmation mail for a
read confirmation mail request.
4. Priority: You can select the priority level
of the messages (Low, Normal and High).
5. Validity period: Allows you to configure
the term of validity for a message when
transmitting a multimedia message. The
message would be saved in the multimedia
message server only for the configured
term.
6. Slide duration: Allows you to configure
the duration of each page when writing a
message.
Messaging
7. Delivery time: Configures the delivery
time of message to the recipient. The
Multimedia message centre will deliver the
message after the delivery time.
8. Multimedia msg. centre: Allows you to
configure network information such as the
MMSC and the WAP gateway, to send a
multimedia message.
Using the left soft key [Options], you can
activate, add or delete a profile. A profile
name selected by a checkmark is the
currently configured value. You can view
and edit the contents of the profile in edit
mode by pressing the right soft key [Edit].
The edit screen also appears when
creating a new profile under Options. The
meaning of each item is given below.
53
Messaging
Messaging
Title: Profile name.
E-mail
MMSC URL: Enter the multimedia
message centre URL.
You can configure settings for receiving and
transmitting emails.
MMS Proxy: Enter the WAP gateway
address and port number.
1. Vodafone Mail: Access to Vodafone Mail.
(Note: This service is not available in all countries.
Connection mode: Select one of the
connection mode. (TCP with Proxy, TCP
without Proxy, UDP)
Access points: Specify the access point
name. (see WAP connection settings.)
Press the right soft key [Done] to save the
changes and complete Multimedia msg.
centre setting.
(Menu 5.9.3)
Please contact your service provider for further
information.)
2. Allow reply email: Determines whether to
allow sending a read confirmation mail for
a read confirmation mail request.
3. Request reply email: Determines whether
to request a read confirmation mail.
4. Auto retrieve: You can configure Auto
retrieve to retrieve emails automatically
from the incoming mail server. When a new
email arrives, an icon appears at the top of
the screen. You can select the auto
receiving time slot to Off, 15 minutes, 30
minmutes or 1 hour.
Please note that additional charges may
be incurred using the Auto retrieve
feature.
5. Include message in Fwd. & Reply:
Determines whether to include the
54
6. Signature: You can configure a text
signature to be attached to the end of an
email. The configured signature text is
automatically or manually attached to the
end of the email when it is sent.
7. Priority: You can select the priority level
of Emails (Low, Normal and High).
8. Email accounts: You can create or
configure an email account including the
email server and user ID. You can edit a
selected email account by pressing the
right soft key [Edit]. You can select an
email account to be used to send an email
using
. You can select the following
functions using the left soft key [Options].
Add new: Create a new email account.
Edit: To edit the selected email account.
Activate: Activates the selected account
for outgoing mail.
Delete: Deletes a selected email
account. All the emails included in the
account will be deleted.
Creating a new email account
1. Select Add new from the Email account
menu options.
2. The following items need to be configured.
Title
Enter a title.
Username
Enter the user name of the email
account.
Password
Enter the email account password.
Email address
Enter the email address for outgoing
mail.
Reply email
address
Enter the email address to reply to
your email.
Outgoing mail
server
Enter the outgoing email server.
Incoming mail
server
Enter the incoming email server.
SMTP port
number
Enter the mail server port number. In
general, the SMTP (Outgoing mail
server port number) is 25.
Incoming server
port
Enter the mail server port number. In
general, the incoming mail server port
number is 110(POP3) or 143(IMAP4).
Messaging
received message when you forward the
message or reply to it.
55
Messaging
Messaging
Maximum receive Select the maximum email receive size
using
. The permissible maximum
size
receive size is no more than 1MB.
Mailbox type
Select the email inbox type either
POP3 or IMAP4 using
Save to server
Determine whether to leave a copy of
messages on the incoming server or
not using
. When the mailbox type
is set to IMAP4, a copy of messages
are always saved to the server.
Save sent mail
into
Select where to save the sent mails
(when the mailbox type is set to
IMAP4). When the mailbox type is
POP3, sent mails are always saved into
handset.
Access points
Select an access point to connect to
the Internet. You can select a
configured access point using
Auto retrieve
Decide whether to activate Auto
retrieve or not using
. You can set
the auto receiving time slot using the
Auto retrieve [Menu 5.9.3.4]. (See
page 54.)
SMTP
authentication
56
Decide whether the outgoing mail
server to require authentication or not
using
. When the SMTP
authentication is set to On, you can
enter the SMTP Username and SMTP
Password for SMTP authentication.
APOP secure
login
Decide whether to activate APOP
secure login or not using
. When
the mailbox type is IMAP4, APOP
secure login is always set to OFF.
3. Press the right soft key [Done] to
complete the email account configuration.
Editing an email account
1. Select a desired email account from the
email account list and press the right soft
key [Edit].
2. You can edit desired fields by moving the
cursor up and down.
3. When configuration is complete, press the
right soft key [Done] to complete the
email account configuration.
Note
When you try to change the mailbox
type, all emails downloaded before
would be deleted.
Info. service
(Menu 5.9.4)
Cell broadcast: You can set the reception
status.
Channels: You can add or modify the
channels.
Languages: You can select the language
you want by pressing
. Then, the info
service message will be shown in the
language that you have selected.
Service message
Messaging
(Menu 5.9.5)
You can configure the service message
receipt option.
57
My Files [Menu 6]
My Files
Pictures
The Pictures folder consists of embedded
links for downloading pictures through the
Internet and Default images.
Pictures taken using the camera are stored in
the Pictures folder and you can create new
folders to manage them. You can also save
selected files as animated Gifs and send
multiple files to other people.
When a file is selected, the following options
will be displayed by pressing the left soft key
[Options].
View: You can view the selected picture.
Create new folder: You can create a new
folder within the folder currently selected.
Send: You can send the selected image via
Message, Postcard, Email or Bluetooth.
File
- Move: Enables the file to be moved to
other folder.
- Copy: Enables the file to be copied to
other folder.
- Rename: You can rename the image.
58
- Edit: Enables the image to be edited.
Menu 6.1
- Make GIF animation: You can create an
animated GIF file with different photos
(up to 10 files of 176X220 resolution
with a 2Mbyte file size limit for display).
- Info.: Shows information on the selected
image file.
Delete: Deletes the selected image.
Mark/Unmark: Using the Mark function,
you can send, delete, move and copy
multiple files.
Main display: You can set an image as the
screen theme (Home screen, Outgoing call,
Start up image, Power off image).
Slide show: You can start a slide show.
Sort by: You can sort the files by name,
date, or file type.
List view/Grid view: You can view the
images as a List view or Grid view.
Memory status: You can view the memory
status(handset or external memory card).
Menu 6.2
- Move: Moves the file into handset
memory or external memory.
The Sounds folder consists of embedded
links for downloading ringtones and music as
well as folders containing the Default sounds
and Voice recordings. Here you can manage,
send or set sounds as ringtones.
Videos
- Copy: Copies the file in handset memory
or external memory.
- Rename: You can rename the video.
- Info.: Shows information on the selected
video file.
Menu 6.3
Here you can manage or send downloaded or
captured videos clips.
File
My Files
Sounds
Delete: Deletes the selected video.
Mark/Unmark: Using the Mark function,
you can send, delete, move and copy
multiple files.
The following are available using the left soft
key [Options] in the Video list.
Play: Plays the video.
Create new folder: You can create a new
folder.
Sound theme: You can set a video as the
voice ringtone or video ringtone.
Send: You can send the selected video clip
via Message, Email or Bluetooth if not
protected by Digital Rights Management
(DRM).
Sort by: You can sort files by name, date,
or file type.
List view/Grid view: Displays the video
files as a List view or Grid view.
Memory status: Displays the memory
status(handset or external memory card).
59
My Files
My Files
You can view a video using the video player.
Video files are displayed in the list as
thumbnails. You can select a desired video by
using the
. Select a
desired video and select Play to view the
recorded video.
Pause/Play: You can play or pause playing
a file for a moment.
Send: You can send the video via Message,
Email or Bluetooth if the file is not
protected by Digital Rights Management
(DRM).
Go to list: Goes back to the list.
Delete: Deletes the selected video.
Sound theme: You can set a video as the
voice ringtone or video ringtone.
Wide view: You can view the video in wide
view mode.
To view the current playback in full screen,
press the right soft key during the playback.
Mute/Unmute: If the Volume is set to
more than 0, Mute mode is activated and if
the Volume is set to 0, the Unmute mode is
activated.
To return to the previous screen size, press
the right soft key once again in full screen
mode.
Capture: You can save what is on the
paused screen as an image file (only
possible in Pause mode).
Set repeat: You can set the repeat option
(None/Current file/All files).
Select the right soft key [Send] to attach the
selected video to a message, Email or
Bluetooth.
When option 1. Play is selected, the video
clip will be played with the Media Player. To
pause the playback, press
during the
playback. To resume the paused playback,
press
once again.
To capture the screen shot, press the right
soft key [Capture] when the playback is
paused.
When viewing video clips in the Media Player,
the following options are available:
60
]
Move to
- Next file: Plays the next video file.
File info.: You can check information on
files being played(File name, Size, Date,
Type, Duration, Protection).
Games & Applications
View/Edit/Move/Copy/Delete/Rename
file(s).
Mark/Unmark one or all file(s).
Send a file via MMS, Email or Bluetooth if
not protected by Digital Rights
Management (DRM).
Menu 6.4
You can easily download games and other
applications in this menu. It has two folders,
Games and Applications, as default. Each
folder has an embedded link for downloading
games or applications. Please note that
additional cost may be incurred when using
online services. You can create a folder using
the left soft key [Options].
Bluetooth data
The options displayed depend on the type of
file selected. For instance, in case of an
image, the following functions are supported.
Menu 6.5
The files received using Bluetooth are saved
in this folder. You cannot create a sub-folder
within the Bluetooth data folder.
You cannot copy or move files that are not
managed by My Files.
My Files
- Previous file: Plays the previous video file.
Note
For the image files of which resolution is
640x480 or above, you can send them
via Postcard.
If relevant, you can set an image as the
screen theme (Home screen, Outgoing call,
Start up image, Power off image).
If relevant, start or set (normal or full
screen, at what pace) a slide show.
If relevant, create an animated GIF file with
different pictures.
Sort the files by name, date or file type.
61
My Files
My Files
Memory info(handset or external memory
card).
View file information.
Other files
Menu 6.6
Other files except pictures, sounds, videos,
games & applications are stored in this
folder.
External memory
Menu 6.7
If you purchase an optional external microSD
memory card, you can manage more content.
Refer to the section How to use a microSD
memory card on page 21 and 22 to learn
how to insert and remove the memory card.
You can manage content as you do on your
phone.
62
Organiser & Tools [Menu 7]
Menu 7.1
If you set the alarm, the
appears on the
indicator bar. The specified alarm sounds at
the scheduled time. Press
to stop the
alarm, and the alarm is released. Press the
right soft key [Snooze] and choose the
snooze interval. The alarm sound stops and
resumes after the selected Snooze duration.
You can configure up to 5 alarms.
4. Select repeat mode: Select the desired
repeat mode using
/ or select the
desired one from the list by pressing .
5. Select bell: Select the bell to ring at the
alarm time using
or opening the
list by pressing
6. Input memo: Input alarm name.
7. Snooze: You can set the snooze duration
for the alarm.
1. Select your desired alarm to configure in
the alarm list. If there is no alarm, press
the right soft key [Add] to add a new
alarm.
8. When you have finished setting the alarm,
press the right soft key [Done].
2. Set/Cancel alarm: Set or cancel the
alarm using the options for specifying
whether the alarm is on or by choosing
the alarm time.
The alarm will go off even when the phone
is switched off.
3. Input alarm time: Input your desired
alarm time by specifying Hour and Minute.
Choose either ‘AM’ or ‘PM’ which is visible
if 12 hour format is specified for the
phone.
Organiser & Tools
Alarms
Note
Calendar
Menu 7.2
Schedule inquiry and search
1. Reference by Months
You can refer to your schedule by months.
The cursor is on the current date, and the
registered date is marked.
The schedule saved for the date where the
cursor is located is represented by an icon.
63
Organiser & Tools
Organiser & Tools
Pressing the shortcut key
moves to the
previous year and pressing
move to
the next year and pressing
moves to
today. Pressing
moves to the previous
month, and
moves to the next month.
Pressing
moves to the weekly calendar,
and
moves to the monthly calendar.
You can move the date using
2. Reference by Days
Pressing
in the reference by month
moves to reference by day where you can
refer to your schedule by days. You can
refer to the moving date tab using
. As a search result, brief schedule
contents, repetition set up configuration,
and alarm set up configuration are
displayed. You can send the schedule to
another phone or an Internet site through
SMS(Text message) or MMS(Picture
message) or Email or Bluetooth.
3. Detailed reference
You can refer to a detailed schedule, that
is the whole contents of the schedule
configured by the user. You can send the
schedule to another phone or an Internet
64
site through SMS(Text message) or
MMS(Picture message) or Email or
Bluetooth using the left soft key
[Options].
Search schedule
You can add a schedule. You can configure
the start date, end date, start time, end time,
contents, type of schedule, repetition, alarm
of the schedule.
Set type: Appointment, Anniversary,
Birthday, Others
Set repeat: Once, Daily, Weekly, Monthly,
Annually, User setting
Set alarm: No alarm, On time, 15 mins
before, 30 mins before, 1 hour before, 1
day before, 3 days before, 1 week before
Delete schedule
1. Delete elapsed schedules
You can delete all elapsed schedules using
this function.
Set up and release holiday
You can set up or release user holidays. Press the
left soft key [Options] and select Set holiday.
The selected date will be displayed in red.
To release the holiday, press the left soft key
[Options] and select Reset holiday.
Schedule notification
If the user has configured the alarm setting,
the specified alarm sound will ring. If the
notification time is before the schedule start
time, you can set up the alarm again.
Add
To add a task, press the right soft key [Add]
in the Tasks list management screen. Then
input the date, description and priority for
the task.
When you have finished entering the data,
press the right soft key [Done] to save the
new task.
Organiser & Tools
2. Delete all
You can delete all saved schedule contents
using this function.
Detailed view and Edit
To view detailed task contents, locate the
cursor on the desired item in the Tasks list,
and then press
. You can edit and delete
a task using the left soft key [Options]. You
can also delete multiple or all tasks at once
using the Mark/Unmark option.
Set job status
Tasks
Menu 7.3
You can view, edit and add tasks to do. Tasks
are displayed in time order. Tasks that have
been completed or not completed are
displayed in different ways.
Tasks set as finished are displayed as crossed
out below the unfinished tasks in the Tasks
list. You can set Finished tasks to Not
finished by selecting Option.
65
Organiser & Tools
Organiser & Tools
Memo
Menu 7.4
Using the memo management function, you
can view and manage saved memo contents,
and add new memo.
Add memo
To add a new memo, press the right soft key
[Add]. Enter the contents of the memo. You
can save the memo to the list by pressing the
right soft key [Done].
Edit and delete memo
Highlight the desired memo and press
to
view its contents. You can edit or delete the
contents of a memo using the left soft key
[Options]. You can return to the memo
management screen by pressing
. You can
select Multiple or All memos using the
Mark/Unmark option and then delete a
memo by pressing the right soft key [Delete].
66
Calculator
Menu 7.5
The calculator module allows you to
perform basic arithmetic functions such as
addition, subtraction, multiplication, and
division as well as some scientific functions.
1. Press the left soft key [Options].
2. Select the appropriate function.
You can enter numbers by using the number
keys, and the operators by using
. You can enter a decimal point by
pressing
. Whenever you press
characters are sequentially deleted in reverse
order. Whenever you hold
down, all the
characters are deleted in reverse order in one
go.
When calculation is complete and the result
is displayed on the screen, pressing a number
clears the previous result and the calculator
waits for new input, even if you did not press
the right soft key [AC]. When calculation is
complete and the result is displayed on the
screen, pressing a symbol saves the result
into the symbol, and continues calculation.
Menu 7.6
Using this menu, users can convert Currency,
Surface, Length, Weight, Temperature,
Volume and Velocity.
Currency
(Menu 7.6.1)
1. Select the Currency menu.
2. Users can set a currency exchange rate
using [Rate].
3. Enter currency rates for up to 6 currencies
equivalent to GBP and then press [Done].
Then you can convert from one currency
to another.
4. You can view the value of up to 6 currency
units.
5. Press [Reset] to clear the current input
Field.
6. To exit the currency conversion function,
press the [Back] key.
Surface
(Menu 7.6.2)
1. Select Surface menu.
2. Select the desired unit to convert using
[Unit].
3. Enter the standard unit and view the
converted value.
4. Press [Reset] to clear the current input
Field, and locate the cursor in the input
field.
Organiser & Tools
Converter
5. To exit the Surface conversion function,
press [Back] key.
Length
(Menu 7.6.3)
1. Select the length menu.
2. Select the desired unit to convert using
[Unit].
3. Enter the standard unit and view your
converted value.
4. Press [Reset] to clear the current input
field and locate the cursor in the input
field.
5. To exit the length conversion function,
press the [Back] key.
67
Organiser & Tools
Weight
(Menu 7.6.4)
Organiser & Tools
1. Select the Weight menu.
2. Select the desired unit to convert using
[Unit].
3. Enter the standard unit and view the
converted value.
4. Press [Reset] to clear the current input Field,
and locate the cursor in the input field.
5. To exit the Weight conversion function,
press the [Back] key.
Temperature
(Menu 7.6.5)
1. Select the Temperature menu.
2. Position the cursor on the desired unit by
using the up or down arrow keys.
3. Enter the standard unit and view the
converted value.
4. Press [Reset] to clear the current input
field and locate the cursor in the input
field.
5. To exit the Temperature conversion
function, press the [Back] key.
68
6. You can insert negative values by selecting
[-].
Volume
(Menu 7.6.6)
1. Select the Volume menu.
2. Select the desired unit to convert using
[Unit].
3. Enter the standard unit and view the
converted value.
4. Press [Reset] to clear the current input
field and locate the cursor in the input
field.
5. To exit the volume conversion function,
press the [Back] key.
Velocity
(Menu 7.6.7)
1. Select the Velocity menu.
2. Select the desired unit to convert using
[Unit].
3. Enter the standard unit and view the
converted value.
]
Duration: You can set the recording
duration to MMS msg. size, 30 secs, or 1
min.
5. To exit the Velocity conversion function,
press the [Back] key.
New recording: Select this menu to start
recording to a new file.
My Files: Opens the Voice recordings
folder in My Files.
World time
Menu 7.7
The World time function provides time
information on major cities worldwide.
You can view the time of the desired country
or city by navigating using
You can select a desired city as a base using
the right soft key [Home].
Voice recorder
Menu 7.8
1. Press the left soft key [Options] to display
the option pop up menu before recording.
2. Move to the desired menu item using
and press
Quality: You can select a recording
quality from Super Fine, Fine and
Normal.
Organiser & Tools
4. Press [Reset] to clear the current input
field and locate the cursor in the input
field.
3. Pressing
starts recording. When a
recording is started, the recording time
appears on the LCD. To cancel the
recording, press the right soft key
[Cancel].
4. When you finish the recording, press
to exit. The recorded file is automatically
saved in the Voice recordings folder in My
files.
5. When no recording is in progress, pressing
starts recording on a new file.
When no recording is in progress, press
the right soft key [Send] to send a
recorded file.
Select one from Message, Email, or
Bluetooth using
and press
69
Organiser & Tools
Organiser & Tools
6. Press the left soft key to select the various
options after the voice recording.
7. Select the desired menu using
and press
Delete: Select this menu to delete a
recorded file.
New recording: Select this menu to start
a new voice recording.
Send: To send the recorded file. Select
one from Message, Email and Bluetooth
using
and press
Sound theme: You can set the recorded
file as the Voice Ringtone, Video
Ringtone, Start up sound or Power off
sound.
My Files: Opens the Voice recordings
folder in My Files.
8. Press the right soft key to close the
sub-menu popup window.
70
Contacts [Menu 8]
Menu 8.1
Groups
Menu 8.3
You can register a new contact address. You
can enter the name, different phone numbers
and email addresses of a new contact. You
can also assign the contact to groups,
include an image or avatar, assign a specific
ringtone and even enter a memo for the
contact. Other available fields include Home
page URL, Home address, Company name,
Job title and company address. You can enter
and manage contact addresses depending on
the memory usage.
Using this menu you can manage group
information (both stored in the Handset and
the USIM). In the handset memory, there are
4 default groups: Family, Friends, Colleagues
and School. You can add, edit and delete
groups. When a ringtone for a number is not
specified, a call from the number sounds the
group ringtone assigned to the number for
the group.
Contacts list
Using this menu you can manage speed dials.
Speed dials are configured between 2-9. You
can register speed dials for a specific contact
address up to 5 different numbers, and a
contact address may have multiple speed
dials.
Menu 8.2
Performs the contact address search
function. The search operation is performed
based on a name as a default. The current
search method and results found are
displayed in the Search window. You can
make a phone call or send a message to the
selected phone number. A Contacts search
can be performed based on the phone
number or group information.
Speed dials
Service dial numbers
Contacts
Add new
Menu 8.4
Menu 8.5
You can view the list of Service Dialling
Numbers (SDN) assigned by your service
provider (if supported by the USIM card).
71
Contacts
Such numbers include emergency, directory
enquiries and voice mail numbers. After
selecting a service number, press
to dial
the service.
Own number
View contacts from
(Menu 8.7.4)
You can move contacts from the phone
memory to the USIM or from the USIM to
the phone memory. You can move all items or
one at a time.
Clear contacts
(Menu 8.7.1)
(Menu 8.7.2)
Select whether to display image/avatar or
not.
72
Move all
Menu 8.7
Select which contact information shall be
displayed (from handset memory, from USIM
card or both). All is the default setting.
Show image/avatar
(Menu 8.7.3)
You can copy contacts from the phone
memory to the USIM or from the USIM to
the phone memory. You can copy all items or
one at a time.
Menu 8.6
Allows you to display your phone number in
the USIM card. You can save own numbers
being used in the USIM card.
Settings
Copy all
(Menu 8.7.5)
Clears all contact information. You can delete
all contacts saved in the mobile phone
memory as well as on the USIM card.
Calls [Menu 9]
The number and name (if available) are
displayed together with the date and time at
which the call was made. You can also view
call times.
All calls
Menu 9.1
Received calls
Menu 9.3
Allows you to view received call records, make
a call, send a message, and save the number
in Contacts.
Missed calls
Calls
You can check the record of missed, received,
and dialled calls only if the network supports
Calling Line Identification (CLI) within the
service area.
Menu 9.4
Allows you to view missed call records, make
a call, send a message, and save the number
in Contacts.
Allows you to view the missed, received, and
dialled call records. You can make a call, or
send a message to the number you have
selected from the records. You can also save
the number in Contacts.
Dialled calls
Menu 9.2
Allows you to view dialled call records, make a
call, send a message, and save the number in
Contacts.
73
USIM Tool Kit [Menu *]
USIM Tool Kit
Depending on whether you have SAT support
services or not (i.e. USIM Application Toolkit)
on the USIM card, this menu (Menu ) may
be different.
If the USIM card supports SAT services, this
menu will be the operator-specific service
name stored on the USIM card, for instance
“Special”. Please refer in that case to the
information provided with your USIM card
for further information on how to use the
related options.
If the USIM card does not support SAT
services, this menu will be Alarms.
For the Alarms menu feature, please refer to
page 63.
74
Video call [Menu 0]
Private/Show mode
1. Enter the number you want to dial.
Hold/Resume
You can key in the number.
Capture
You can select the number from Contact
using the left soft key [Contacts].
View sender number
Settings
You can find the number from call logs
by pressing
[Calls].
End call
2. Press the right soft key [V-Call] to make a
video call.
During a video call
When you are in a video call, the screen will
show the contact's name and duration of call,
contact's image, volume indicator, video
control panel, and your image.
You can access the following option menus
by pressing the left soft key [Options].
Microphone on/off
Speaker on/off
Bluetooth/Handset talk (When the
Bluetooth headset is connected)
Video call
You can make a video call using this menu.
Incoming video call
When a video call is received, the caller's
information is displayed as following.
Picture/Animation: Displays picture ID,
graphic image configured in Contacts, or
default animation indicating the incoming
call.
Caller's name and number: Shows
incoming caller's number. If the number is
stored in Contacts, displays the name of
the contacts.
Picture ID and animation setting is used in
the order of Contacts, video file used in
Group ringtone, and video file used in Profile.
75
Video call
Video call
Also, sound can be set for the incoming
video call. The sound setting is used in the
order of Contacts, Group ringtone, and
Profile.
You can accept the incoming call by pressing
the left soft key [Accept].
The incoming call ringing can be silenced by
pressing the right soft key [Silent]. It can be
also silenced by long press on
on the left
side of the phone.
When ringing is silenced, press the right soft
key [Reject] to reject the call.
76
Settings [Menu #]
Profile
Menu #.1
(Menu #.1.1)
You can select ringtone or vibration for an
incoming call and configure the sound and
volume of the ringtone, key tone, and sound
effect, according to a profile. The profiles
provided include [Normal], [Silent], [Vibrate
only], [Outdoor], [Headset], [Customised
1], [Customised 2], and [Customised 3].
Select a profile, and press
to activate the
profile. After pressing the left soft key
[Options], select the Edit menu for the
[Normal], [Outdoor], [Headset],
[Customised 1], [Customised 2] and
[Customised 3] profile to change the
configuration. A different list of options is
available for each profile that has been
selected for editing.
Alert by
This option determines the incoming call
notification mode. You can select from
[Ring], [Vibration], [Silent], [Ring &
vibration], [Ring after vibration], [Max Ring &
Vibration].
Voice ringtone
You can select the ringtone for incoming
voice calls.
Settings
Phone settings
Video ringtone
You can select the ringtone for incoming
video calls.
Volume
Set the ringtone volume.
Message alert
You can set how often the phone is to inform
you of a received message until it is read.
Message tone
You can select a file from among your own
personal files or from the default files, to be
played by the phone upon receiving a
message.
Key tone
You can set the key tone to be played when
pressing the keys.
77
Settings
Settings
Key tone volume
Select power off sound
You can set the volume of the chosen key
tone, choosing from 7 available levels.
You can select which file will be played when
the phone is switched off.
Slide tone
Date & time
Select the desired tone the phone will emit
when you slide up/down the phone.
You can set the confirmation tone to be
played by the phone to confirm actions.
Start up sound
Time
You can set the effect to be played when the
phone is switched on.
1. Select the Time item from the Date &
time list, and then press
Select start up sound
2. Move to your desired field, Hour, Minute,
or am/pm field using the navigation keys.
(When you have selected 12 hour as Time
format)
Confirmation tone
You can select which file will be played when
the phone is switched on.
Power off sound
You can set the effect to be played when the
phone is switched off.
78
(Menu #.1.2)
Although the current time is automatically
configured when the phone is registered to
the network, users can configure the time
and date directly using this menu. The time
configured by the user is valid only while the
phone is turned on.
3. Enter Hour, and Minutes using the
number keys.
4. Select the time format using
5. Scroll down to select the hour indicator
format i.e. Off, Cuckoo clock or Chime
bell.
Date
1. Select the Date item from the Date &
time list, and then press
2. Select the date format using
3. Enter Day, Month and Year using the
number keys.
4. Press the right soft key [Done] to set the
date with the specified value.
Language
(Menu #.1.3)
Select the display language. You can select
Automatic language option to change
display language to the USIM card supported
language.
Security
(Menu #.1.4)
PIN code request
When this is set to On, you are requested to
enter your PIN each time you switch the
phone on.
Auto update date/time
Note
When Auto Update is configured to On, the
time and date are automatically updated
according to the current time zone. If
Confirm first is selected, the time and date
update is confirmed before it is updated
automatically.
Press
in the PIN code entry window
to return to the previous step.
3 incorrect PIN code entries would
invalidate the PIN code. And you have to
enter the PUK (PIN Unblock Key) code
to configure the PIN code again.
The maximum number of times you may
enter the PUK code is 10. (Note: If you
enter an incorrect PUK code 10 times,
the USIM card will be blocked and must
be replaced.)
If the PIN code request cannot be
disabled by operator settings, you will
not be able to choose this menu item.
Daylight saving
Select whether to activate the daylight saving
function or not. You can set the Summer
time difference of selected home city for 1
hour or 2 hours.
Settings
6. Press the right soft key [Done] to set the
time with the specified value.
79
Settings
Handset lock
Settings
You can lock your phone. The following 4
lock functions are available.
When switching on: Locks the handset
whenever the handset is switched on.
If USIM changed: Locks the handset when
the phone's USIM card has been changed.
2. Enter the current PIN code, and press
4. Enter the new PIN code once again, and
press
None: Deactivates the lock function.
To unlock the handset, you need to enter
the security code.
Change codes
You can change the PIN, PIN2, the mobile
phone password and the call barring
password.
PIN code
PIN is the abbreviation for Personal
Identification Number, and is used to restrict
use by an unauthorised user.
3. Enter the new PIN code, and press
Immediate: Locks the handset immediately.
You are requested to enter the security code
to confirm the selection.
80
PIN code change procedure
1. Select ‘PIN code’ from the ‘Change codes'
list and then press
If the PIN code is different from that of
step 3, the procedure is restarted from
step 3.
5. When the PIN code is changed properly, a
Changed message is displayed. If you
enter an incorrect PIN code in step 2, the
procedure is restarted from step 2, and
the number of attempts you have left to
enter the number decreased by 1.
6. Press
in the PIN code entry window to
return to the previous step.
Note
Three incorrect PIN code entries in the
PIN code entry window would invalidate
the PIN code. In this case, you have to
enter the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum number of times you may
enter the PUK code is 10. (Note: If you
enter an incorrect PUK code10 times,
the USIM card will be blocked and must
be replaced.)
PIN2 code
PIN2 is the abbreviation for Personal
Identification Number 2, and is used to
restrict use by unauthorised users as with the
PIN. The PIN2 code change procedure is the
same as the one for the PIN code. 3
incorrect PIN2 code entries would invalidate
the PIN2 code. In this case, you have to
enter the PUK2 code in order to use the
PIN2 code again. The maximum number of
times you may try to enter the PUK2 code is
10, like PUK1. 10 incorrect PUK2 code
entries would invalidate the PIN2 code.
Security code
The security code is used to change the
mobile phone password. The maximum
number of attempts to enter the security
code is not limited as it is with PIN and PIN2.
Settings
Keypad lock
If you select Off, the keypad can be
activated only when the slide is open. If you
select On, you can activate the keypad by
pressing
on the left side of the phone.
Power save
(Menu #.1.5)
Decide whether to activate the power save
mode or not.
Memory status
(Menu #.1.6)
User memory
This function shows the status of the user
memory of the mobile phone. Since this
function scans the overall file system for
statistics, a few seconds are required.
81
Settings
User reserved memory
Reset settings
Settings
This function shows the status of the User
reserved memory. The usual contents are
Text messages, Contacts, Calendar, Tasks,
Memo. And it gives a clear illustration of the
actual amount compared with the total
amount for each item.
USIM memory
This function shows the status of the USIM
card user memory.
This function shows the status of the
External card user memory. This function
displays the In-use and free memory usage
statistics.
Format external memory
Select this to format the external memory.
(Menu #.1.7)
This functions shows the USIM card
telephone number, model name and software
version of the mobile phone.
82
Clear memory
Select this to clear the memory. You are
requested to enter the security code.
Handset contents: Deletes all the
multimedia contents downloaded.
Handset personal info.: Deletes personal
information such as received messages or
emails.
Default setting
External memory
Handset Information
(Menu #.1.8)
Select this to reset your phone to its default
configuration. You are requested to enter the
security code.
Menu #.2
This menu allows you to personalise the
display options of the screens and of the
menus entire graphic interface.
Main Display
(Menu #.2.1)
You can set the screen theme to be displayed
on the main screen.
Home screen
Wallpaper: You can select an image to be
displayed on the main screen.
Display items: You can select which items
to display on the screen: Calendar + Clock,
Calendar, Clock, Dual clock or Do not show.
Shows shortcut icons: Decide whether to
display the shortcut icons or not.
Outgoing call
You can select the image to be displayed
while dialling a number.
Start up image
You can select the image to be displayed
while the phone is being switched on.
Settings
Display settings
Power off image
You can select the image to be displayed
while the phone is being switched off.
Menu style
(Menu #.2.2)
You can select the desired menu style from
Grid style and One by one style.
Font
(Menu #.2.3)
You can set the font style, dialling font size,
and dialling font colour using
Backlight
(Menu #.2.4)
You can set the backlight duration on the
Home screen and Keypad individually.
Welcome message
(Menu #.2.5)
After selecting On, you can write a welcome
message.
83
Settings
Settings
Java settings
Menu #.3
Activating a profile
1. Move the cursor to the profile you would
like to activate.
You can edit and delete a profile by selecting
Edit and Delete from the Options menu.
2. Press
or select Activate from the
Options menu.
Messaging settings
Adding a new profile
For detailed information, please refer to page
51.
1. Select Add new from the Options menu.
The following items need to be configured.
84
2. Press the right soft key [Done] to save any
configuration changes.
Service name
Enter an account name for the profile.
Connection
mode
Choose from the given list of
connection modes. (Default is TCP
with Proxy)
IP address
Enter the WAP Gateway IP address
provided by the operator. (e.g. 195.
115. 025. 129)
Proxy server
port
Port details are provided by the
operator, depending upon the
Connection mode.
Access point
Choose from the given list of access
points. (For more details on adding or
editing a new access point, refer to
page 98.)
Menu #.4
Call settings
Call durations
Menu #.5
(Menu #.5.1)
You can view call time by types. Press the left
soft key [Options] to choose either partial
initialisation or entire initialisation. Also press
right soft key [Clear] to initialise a selected
duration type. Initialization will require your
Security code.
The following timers are available:
Last call: Shows the latest call time in units
of hours/minutes/seconds.
Received calls: Shows incoming call time.
Dialled calls: Shows outgoing call time.
abroad menu rejects incoming calls when
roaming.
All calls: Shows total call time.
Voice calls
Call barring
Settings
Video calls
(Menu #.5.2)
Call barring menus for Voice and Video calls
are provided.
The menu consists of Voice calls, Video calls
and Deactivate all. The Voice calls and Video
calls menus have the following submenus.
The Call barring menu consists of All
outgoing, Outgoing international,
Outgoing international calls except home
country, All incoming and Incoming when
abroad submenus.
The All outgoing menu bars dialling all
outgoing calls, the Outgoing international
menu bars dialling outgoing international
calls, and the Outgoing international calls
except home country menu bars dialling
outgoing international calls except for the
Home PLMN country. All incoming rejects
all incoming calls and the Incoming when
All outgoing
1. When
is selected, it receives the
Barring password from user, and activates
the barring service on the network. A
requesting message and animation
appears. When the network answers, the
result of the operation is displayed.
2. When the Options menu is selected, it
activates the Outgoing calls menu. Select
the Options menu from the soft menus on
the lowest menu. Then Deactivate,
Activate, Deactivate all, View status and
Change password menus appear. Select
the Activate menu to receive the Barring
password from the user and activate the
barring service on the network.
The Deactivate menu deactivates the
barring service after the user's Barring
password is entered. The Deactivate all
85
Settings
Settings
menu deactivates all barring services
configured in the network after the user's
Barring password has been entered. The
View status menu enables users to view
the current network configuration.
Selecting View status menu displays the
Requesting message with animation and
the result of the operation when the
network answers. Change password menu
enables users to change the current
barring password.
Outgoing international
1. When
is selected, it operates in the
same way as the Outgoing calls menu.
2. When the Options menu is selected, it
activates and operates the International
calls menu. It operates in the same way as
the Outgoing calls menu.
Outgoing international calls except home
country
1. When
is selected, it operates in the
same way as the Outgoing calls menu.
2. When the Options menu is selected – It
activates and operates the International
except home country menu. It operates
in the same way as the Outgoing calls
menu.
All incoming
1. When
is selected, it operates in the
same way as the Outgoing calls menu.
2. When the Options menu is selected, it
activates and operates the Incoming calls
menu. It operates in the same way as the
Outgoing calls menu.
Incoming when abroad
1. When
is selected, it operates in the
same way as the Outgoing calls menu.
2. When the Options menu is selected, it
activates and operates the Incoming calls
when abroad menu. It operates in the
same way as the Outgoing calls menu.
86
Fixed dial numbers
(Menu #.5.3)
Call costs
(Menu #.5.5)
FDN ON/OFF: Select whether to activate
FDN or not. PIN authentication is required.
1. This function displays the call costs of the
Last call and All calls.
FDN List: Displays the current FDN list.
You can edit, add, or delete fixed dial
numbers. PIN2 authentication is required
to edit the list. And the configuration
information is saved on the USIM. The
information saved on the USIM is used
when FDN restricts outgoing calls.
2. To initialise, press the right soft key
[Clear] and enter the PIN2 code.
Data volume
(Menu #.5.4)
Allows you to check the sent, received and all
data volume transferred. (Data volume
transferred through TE connection is
excluded from counting.)
Settings
3. You can select either Units or Currency in
Set call cost. According to your setting,
the call cost is displayed during a call (If
USIM and Network support Advice Of
Charge(AOC)).
4. In the Set limit configuration, select On
to configure the cost limit. When a cost
limit is configured, and the call costs reach
the limit, making a call will not be allowed.
Press the left soft key [Options] to choose
for partial initialization or entire initialization.
You can also use the right soft key [Clear]
for the initialization of the selected volume
type. Initialization will require your Security
code.
87
Settings
Diverts
(Menu #.5.6)
Settings
Call divert menus for voice and video calls
are provided.
The menu consists of Voice calls, Video calls
and Deactivate all.
Voice calls
All voice calls
When busy
No answer
Not reachable
1. When the Deactivate menu is selected
Deletes Call Divert Number registered to
the network. While waiting for the result
from the network, Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
2. When To a number is selected
A dialogue window appears allowing you
to enter a phone number to divert to.
Input a phone number to divert calls to,
and press
. While waiting the result
88
from the network, Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
3. When Recent divert number list is selected
Divert registration is performed with the
selected number. Select the number, and
press
. While waiting for the result
from the network, a Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
4. Options menu
After activating All voice calls menu,
selecting the Options menu at the bottom
of the menus displays the Deactivate,
Activate, Deactivate all, View status and
clear list menus.
Activate: Move to Settings menu to
activate call divert.
The View status menu shows the settings
on the network. If you select this menu,
Requesting. message and animation
appear. Then the network settings are
displayed when the information is received
Video calls
All video calls
1. When the Deactivate menu is selected
Deletes Call Divert Number registered to
the network. While waiting for the result
from the network, Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
2. When To a number is selected
A dialogue window appears allowing you
to enter a phone number to divert to.
Input a phone number to divert calls to,
and press
. While awaiting the result
from the network, Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
Settings
from the network. Selecting Status in the
right soft menu gives the same result. If
you select the Deactivate menu, the call
divert numbers registered in the network
are deleted after user confirmation.
Selecting the Cancel all menu will display
the operation result after showing the
Requesting message and animation.
Clear list menu will delete all divert
number list.
3. When Recent divert number list is selected
Divert registration is performed with the
selected number. Select the number, and
press
. While waiting for the result
from the network, a Requesting message
and animation appears. When the network
answers, the result of the operation is
displayed.
4. Options menu
After activating the All video calls menu,
selecting the Options menu at the bottom
of the menus displays the Deactivate,
Activate, Deactivate all, View status and
clear list menus.
Activate: Move to Settings menu
(above1~4) to activate call divert. The
View status menu shows the settings on
the network. If you select this menu,
Requesting. Message and animation
appear. Then the network settings are
displayed when the information is received
89
Settings
Settings
from the network. Selecting Status in the
right soft menu gives the same result.
If you select the Deactivate menu, the call
divert numbers registered in the network
are deleted after user confirmation.
Selecting the Cancel all menu will display
the operation result after showing the
Requesting message and animation. Clear
list menu will delete all divert number list.
When busy
1. When the Deactivate menu is selected
It operates the same as All voice calls
menu.
2. When To a number is selected
It operates the same as All voice calls
menu.
3. When Recent divert number list is
selected
It operates the same as All voice calls
menu.
4. When Options menu is selected
It activates and operates If busy menu. It
operates the same as All voice calls menu.
90
No answer
1. When the Deactivate menu is selected
It operates the same as All voice calls
menu.
2. When To a number is selected
It operates the same as All voice calls menu.
3. When Recent divert number list is
selected
It operates the same as All voice calls
menu.
4. When Options menu is selected
Activates and operates No answer menu. It
operates the same as All voice calls menu
except that users can configure delay time
in the Set waiting time menu in the menu
list.
Not reachable
1. When Deactivate menu is selected
It operates the same as All voice calls
menu.
2. When To a number is selected
It operates the same as All voice calls
menu.
4. When Options menu is selected
Activates and operates If out of reach menu.
It operates the same as All voice calls menu.
Call waiting
Voicemail
Video call
Deactivate: Deactivates Call waiting
service. Selecting this item displays
requesting message and animation. When
the network answers, the result of the
operation is displayed.
View status: Displays activated Call waiting
service group item of the network.
Selecting this item displays requesting
message and animation. When the network
answers, the result of the operation is
displayed.
(Menu #.5.9)
You can set the screen display when making
/receiving a video call.
Show private image: Determine whether
to show the private image or not.
Select still image: Select the still image to
be displayed.
Mirror: Select to activate the mirror effect
or not.
(Menu #.5.7)
Activate: Activates waiting service.
Selecting this item, displays requesting
message and animation. When the network
answers, the result of the operation is
displayed.
(Menu #.5.8)
You can add or modify voice mail centre.
Settings
3. When Recent divert number list is
selected
It operates the same as All voice calls
menu.
- On: Displays the image flipped side to
side.
- Off: Displays the image as it is.
My image size: Select my image size to be
displayed.
91
Settings
Settings
My image position: Select the position
where your image will be displayed.
Common settings
Send my number
Set by network: Configures with the
default settings determined by the service
provider.
On: Configures to send my phone number
when making an outgoing call.
Off: Configures not to send my phone
number when making an outgoing call.
(Menu #.5.0)
Call reject
You can set whether to reject incoming calls.
1. Select On in Reject menu to activate call
reject. The Reject list menu appears.
2. Set the desired call reject option in the
Reject list menu.
92
All calls: Rejects all calls.
Contacts: Rejects the calls from the
number stored in Contacts.
Groups: You can specify call rejects by
group units stored in Contacts.
Unregistered: Rejects calls from the
number not stored in Contacts.
No caller ID: Reject calls which do not
have CLI information.
Auto redial
Allows you to set the auto redial function
when a call attempt has failed.
Answer mode
Allows you to set the answering method. You
can choose between Press send key, Slide
up and Press any key.
Minute minder
Determines whether to sound a 1 minute
tone every 1 minute when you are on the
phone.
BT answer mode
Hands-free: You can answer a call using
the Bluetooth headset, when the Bluetooth
is connected.
Handset: If you press
on the handset
to answer a call, you can talk on the
handset. If you press the Bluetooth
headset key to answer a call, you can talk
using the Bluetooth headset.
This is the initial answer mode selection. And
while talking, you can switch from handset to
headset or from headset to handset.
Contact settings
Menu #.6
For detailed information, please refer to 72.
(Menu 8.7)
Connectivity
Bluetooth
Menu #.7
(Menu #.7.1)
Settings
Bluetooth connection
Your phone has built-in Bluetooth wireless
technology which makes it possible for you
to connect your phone wirelessly to other
Bluetooth devices such as a handsfree, PC,
PDA or other phones.
You can, for example, have a conversation via
a cordless Bluetooth handsfree or browse the
Internet, wirelessly connected via a mobile
phone. You can also exchange, for example,
business cards, calendar items and pictures.
Note
We recommend that your phone and
the Bluetooth device you are
communicating with be within a range of
10 meters. The connection may be
improved if there are no solid objects
between your phone and the other
Bluetooth device.
93
Settings
Settings
1. Getting started
Note
• Menu > #. Settings > 7. Connectivity >
1. Bluetooth > 1. Paired devices
To use the Bluetooth function, you must first
set Bluetooth to On.
2. Configuring Bluetooth settings
• Menu > #. Settings > 7. Connectivity >
1. Bluetooth > 2. Settings
- Bluetooth usage: To use the Bluetooth
function, set it to [On]. Otherwise, set it to
[Off].
- My handset’s visibility: Set [My handset’s
visibility] to [Show to all] so that other
devices can detect your phone when they
are searching for a Bluetooth device. If you
select [Hidden], other devices will not be
able to detect your phone when they are
searching for a Bluetooth device.
- My handset’s name: You can name or
rename your phone as it will appear on
other devices. Your phone's name will be
shown on other devices only when [My
handset’s visibility] is set to [Show to all].
94
When user uses Bluetooth Device in the
handset, the security of the handset is at
risk.
Therefore, we recommend that Bluetooth
visibility be set to Hidden after
configuration or device pairing.
For incoming files via Bluetooth
regardless of paired devices, you can
choose to accept or reject the
connection, after checking the sender
details.
3. Paired device
Pairing Devices(Pairing with a device)
If a paired Bluetooth device already exists.
• Menu > #. Settings > 7. Connectivity >
1. Bluetooth > 1. Paired devices >
Options > Add new
If there is no paired Bluetooth device.
• Menu > #. Settings > 7. Connectivity >
1. Bluetooth > 1. Paired devices > Add
Options
Add new: Using this menu, you can pair a
new Bluetooth device with your phone.
Assign short name: Using this menu, you
can rename a paired phone as required.
Connecting/Disconnecting the device
1. If you want to open the connection to
the selected device, select the Connect.
2. If you want to close the connection to
the selected device, select the
Disconnect.
Delete: Using this menu, you can delete
the paired Bluetooth device.
Delete all: Using this menu, you can delete
all of the paired Bluetooth devices.

1. To search for a Bluetooth device to pair,
press Add or Add new.
2. Screen shows Searching for devices.
Bluetooth devices within a range of 10m
will be found.
3. If Bluetooth devices are found, these
devices are listed on the screen. If no
Bluetooth device is found, you will be
asked if you want to search again.
4. Pairing procedure
- Press
. A window will appear on the
screen asking you to enter your
password.
Settings
- After creating a password (of 1 to 16
digits), the user of the other device
must enter the password for pairing.
The user of the other device must know
the password in advance for
authentication.

1. Select a device to delete from the Paired
devices screen.
2. You can delete a device by pressing the
Delete key or by selecting Options >
Delete. To delete all paired devices, select
Options > Delete All.

1. To transmit data from your phone to
another Bluetooth device, first select the
application where the target data is saved.
For example, to send data in the My Files
to another device, select
95
Settings
Settings
Menu > 6. My Files > 1. Pictures /
2. Sounds / 3. Videos/ 5. Bluetooth data
/ 6. Other files / 7. External memory >
Select data to transmit > Send > 3.
Bluetooth
2. Transmitting data
1) Last device found is displayed. If the
desired device does not exist in the
list, select [More devices].
2) Select the device to which you want
to transmit data from the devices on
the screen and press
3) If the other party selects [Yes] for
[Connection request], the data is
transmitted.

Menu > #. Settings > 7. Connectivity >
1. Bluetooth > 1. Paired devices
96
If another party attempts to transmit data,
the [Connection request] question will
appear on the screen. If you select [Yes], the
data will be transmitted to your phone.
During data transmission, the Bluetooth icon
flashes.

You can check the received data by selecting
Menu > 6. My Files > 5. Bluetooth data.
4. Device

Menu > #. Settings > 7. Connectivity >
1. Bluetooth
1. Connect the headset according to the
procedures described in the Pairing
Devices section.
2. To use the headset, select the headset
from the registered devices, press the
Option key and then select 3.Connect.
3. To check that the selected headset has
been connected successfully, press the
Option key. If it is properly connected,
3.Disconnect will appear. If it is not
connected, 3.Connect will appear.

1. Menu > #. Settings > 7. Connectivity >
1. Bluetooth
3. To use the handsfree kit, select the
handsfree kit from the registered devices,
press the Option key and then select
3.Connect.
4. To check that the selected handsfree kit
has been connected successfully, press the
Option key. If it is properly connected,
3.Disconnect will appear. If it is not
connected, 3.Connect will appear.
Network
(Menu #.7.2)
Network mode
You can set a type of network to search for
when networks are searched in the Select
network menu.
Automatic: Searches all the networks
connectable.
UMTS: Searches only networks supporting
3G.
GSM 900/1800: Searches only networks
supporting GSM 900/1800 band.
GSM 1900: Searches only networks
supporting GSM 1900 band.
Network selection
Select between Automatic and Manual.
Automatic: Automatically searches for the
network and registers the handset to the
network. This is recommended for best
service and quality.
Manual: All the currently 2G(GSM) and
3G(UMTS) available networks are shown
and you can select one of them for
Settings
registration. If the registration of the
network has failed, all the currently
available networks are listed again and you
can select any other one for registration.
2. Connect the handsfree kit according to
the procedures described in the Pairing
Devices section.
97
Settings
Settings
Preferred lists
Access points
If the network is searching automatically, you
can add a preferable network to be
connected to. And the following options are
available.
This menu shows the access point list. You
can create new profiles, delete or edit them
by using the Option Menu. However, you
cannot delete or edit default configurations
depending on country variant.
You can edit the following configuration
items by selecting the right soft key.
Add new: You can add a new network using
the followings.
- Search: You can select one from the
network list stored in the phone.
- Enter new network: You can enter the
country code (MCC) and the network
code (MNC) to add. After setting, press
Done key.
98
Edit: You can modify the information of
the selected network.
Delete: Deletes the selected network.
Move up: Moves the selected network
upward.
Move down: Moves the selected network
downward.
(Menu #.7.3)
Connection title
Access Point profile name.
Bearer
Choose the bearer from the list.
(Default is UMTS.)
Authentication
Choose the authentication from the
list. (Default is No auth)
User name
Information provided by service
provider.
Password
Information provided by service
provider.
APN
APN name to access network.
Information provided by service
provider.
Press Done key to save any configuration
changes.
(Menu #.7.4)
Select the appropriate profile by pressing
. This will activate the profile to initiate
browser launch.
Security
If user presses Certificates, certification
information is shown.
User can clear secure session information by
pressing Session clear.
Certificates
If stored, a list of root/ca certificates required
for WTLS/TLS can be found here.
Certificates can be viewed from the list.
Session clear
Secure (WTLS/ TLS) session data can be
cleared using this option. Session data
should be cleared to establish a new secure
session.
Character encoding
Sets the browser default character set to one
of the following.
Automatic, English(ASCII), English(ISO),
English(LATIN), Unicode(UCS2 BE),
Unicode(UCS2 LE), Unicode(UCS2 Auto),
Unicode(UTF-16 BE), Unicode(UTF-16 LE),
Unicode(UTF-16 Auto), Unicode(UTF-8).
Settings
Browser settings
Profiles
Scrolling control
Allows you to set the scroll speed by
selecting the number of lines to scroll.
Select from Small(1 line), Medium(2 lines),
Large(3 lines).
Show Image
Allows you to enable or disable image display
during browsing.
99
Settings
Settings
Cache
Dial-up network
Enabling Cache allows you to store accessed
pages to your phone. Once a page has been
stored in cache it will greatly enhance the
page loading speed on subsequent browsing
of the same page.
You can use your phone with a variety of PC
connectivity and data communications
applications. Select USB and Bluetooth you
want to use for the data connection.
Note
Cookies
Enabling Cookies allows you to store cookies
sent from the server. Disabling this function
will prevent cookies from being stored on
your phone.
JavaScript
Select On/Off.
Reset settings
Select this to reset your phone to its default
configuration.
Streaming
(Menu #.7.5)
If you want to set different network setting to
play streaming content, you can set different
network settings.
100
(Menu #.7.6)
Enabling this function will delay
displaying of images until transmission is
completed. Disabling this function will
prevent the browser from downloading
images from the server, thus allowing
faster transmission.
Accessories
Travel Adapter
This charger allows
you to charge the
battery while away
from home or your
office.
Standard Battery
Data cable/CD
You can connect your
phone to PC to
exchange the data
between them.
Hands free ear-microphone and music
player controller combo
Accessories
There are various accessories for your mobile phone. You can select these options according to
your personal communication requirements.
Stereo headset
Controller: Answer &
End key, music player
control, volume control,
Hold button and microphone.
After connecting the headset and the
controller, plug the end of controller into the
headset jack on the right side of the phone.
Note
Always use genuine LG accessories.
Failure to do so may invalidate your
warranty.
Accessories may vary in different regions:
please check with our regional service
company or agent for further
information.
101
Technical data
General
Technical data
Product name: KU970
System: GSM900/DCS1800/PCS 1900,
WCDMA 2100
Net weight: 67.5g(Without battery)
Ambient Temperatures
Max: +55°C
Min: -10°C
102
Index
23
98
66
71
63
92
Backlight
83
Barring password
25
Battery
15, 101
Battery information and care 11
Bluetooth
93
Bluetooth data
61
Browser settings
35, 99
Calculator
Calendar
66
63
Call barring
Camera
Charging the battery
Converter
Data cable
Dialled calls
Display information
Display settings
Diverts
Email
Entering text
External memory
Handset Information
Handset lock
85
38
19
67
Index
Access codes
Access points
Add memo
Add new
Alarms
Answer mode
101
73
24
83
88
46, 49, 54
28
62, 82
82
80
103
Index
Index
Inbox
JavaScript
Java settings
104
47
36, 100
33, 84
Key tone
77
Language
79
Memo
Memory card formatting
Memory status
Message alert
Message tone
Missed calls
MMS
66
22
81
77
77
73
52
Multimedia templates
Music hot key
51
14
Network
Network selection
97
97
Own number
72
PIN code
PIN code request
PIN2 code
Playlists
Profiles
PUK code
PUK2 code
23
79
23, 81
37
35, 99
23
23
S
SAR
Screen structure
Security
Security code
Signal Strength
Speed dials
Stereo headset
73
24, 25
35, 79, 99
23, 81
28
71
101
Tasks
Templates
65
51
USIM memory
USIM Tool Kit
82
74
Videos
Voice calls
Voice mail
Voice recorder
Volume
World time
59
88
91
69
68, 77
Index
Received calls
69
105

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
About                           : uuid:28658136-5650-4009-9dd5-c77a068b3c51
Producer                        : Acrobat Distiller 7.0 for Macintosh
Create Date                     : 2006:12:28 11:16:42+09:00
Modify Date                     : 2007:02:19 13:41:26-05:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Metadata Date                   : 2007:02:19 13:41:26-05:00
Document ID                     : uuid:88532c25-9619-11db-b1b4-000d93af0a0e
Instance ID                     : uuid:25855028-daad-4b29-9ea5-99ffb069ee58
Format                          : application/pdf
Creator                         : 001
Title                           : KU970_Eng(UK)
Has XFA                         : No
Page Count                      : 106
Author                          : 001

EXIF Metadata provided by EXIF.tools