LG Electronics USA L601I GSM Camera Phone User Manual
LG Electronics USA GSM Camera Phone
Contents
Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 685635 |
| Application ID | 0NRlC7bUFO66oWN1RyUFSw== |
| Document Description | Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 296.01kB (3700077 bits) |
| Date Submitted | 2006-07-25 00:00:00 |
| Date Available | 2006-12-13 00:00:00 |
| Creation Date | 2006-07-04 22:43:26 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2006-07-04 22:43:35 |
| Document Title | untitled |
DoCoMo W-CDMA, GSM/GPRS system Thank you for purchasing the “FOMA L601i”. Before or during use of the FOMA L601i, make sure that you read this manual and the separate manuals such as for the battery pack thoroughly so that you can use the FOMA L601i correctly. If you feel any inconvenience in reading the manual, contact the DoCoMo Information Center listed on the back page of this manual. The FOMA L601i is designed to be your close partner. Treat it carefully at all times to ensure long-term performance. Before using your FOMA phone Because the FOMA phones use radio waves, they cannot be used in places where radio waves do not reach, such as inside tunnels, underground, or in buildings; or the outside where radio waves are weak or out of the FOMA service area. They may not be used in the high-rise buildings even when the antennas are unobstructed. You may also experience interruption of calls even when using without moving while the radio waves are strong enough for the three antennas to appear on the display. Use the FOMA phone carefully to avoid disturbing other people when in public, or in crowded or quiet places. Since the FOMA phones use radio waves as the medium of telecommunication, calls may be tapped by the third party. However, the WCDMA and GSM/GPRS systems automatically support tapping prevention, so your conversation will be incomprehensible to the third party. The FOMA phones change your voice into digital signals and send them to the other party. In places where the radio waves are weak, the digital signals may not be converted correctly, and in such a case, the voice heard may sound different from the actual original voice. It is recommended that you make separate notes of the information stored in the FOMA phone and keep such notes in a safe place. DoCoMo cannot be held responsible in any way for the loss of data stored in the phone. The user hereby agrees that the user shall be solely responsible for the result of the use of SSL. Neither DoCoMo nor the certifier as listed herein makes any representation and warranty as for the security in the use of SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifier shall be responsible for any such damage or loss. Certifier: VeriSign Japan K.K. Betrusted Japan Co., Ltd. GeoTrust Japan, inc. This FOMA phone can be used only via the FOMA network or Roaming service area by DoCoMo. For those who use the FOMA phone for the first time If this is the first time for you to use the FOMA phone, read this manual in the order as described below. Then you will get acquainted with the outline of preparing and operating procedures for using your FOMA phone. 1. Attach and then charge the battery pack. > P37, P39 2. Turn the power to the FOMA phone ON, initialize, and confirm your phone number. > P43 3. Check the buttons on the FOMA phone for their roles. > P28 4. Confirm the meanings of icons that appear on the display. > P31 5. Learn how to operate the menus. > P34 6. Get well acquainted how to make and receive calls. > P46, P52 Note that “FOMA L601i” is referred to as “FOMA phone” in this manual. The functions which use a miniSD memory card are described in this manual; however, you need to obtain a miniSD memory card separately to make these functions available. See page 166 for the miniSD memory card. It is prohibited to copy all or part of this manual without permission. The instructions contained in this manual may be changed without notice. How to Read/Refer to This Manual How to Read/Refer to This Manual The search methods and page structure of this manual are described here. Screen displays and illustrations described in this manual are for reference. The actual ones might differ. How to Refer to This Manual By the following search methods, you can find pages where your desired functions and explanations are described: Tabs on Cover ] Cover Search from the tabs printed on the cover. Index ] P306 ] See the next page for more details. Search from keywords when you know the names of functions or services. Contents ] P4 Search from the contents that categorize functions. Features ] P6 Search from Features when you want to use specific functions of FOMA L601i such as new functions and useful functions. Menu List ] P224 Search from list for menus of FOMA L601i. Quick Manual ] P316 Quick Manual gives you a clear, brief description about fundamental functions. You can take it with you when you go outing. a Overseas Use See “Overseas use” (P213) for how to use your FOMA phone outside Japan. How to Read/Refer to This Manual a From the Tabs on the Cover Search for the functions and explanations in the order of the Cover > First page of Chapter > Description page. Contents / Precautions Sound / Display Confirming before use Making Calls / Receiving Calls Making / iving Video-phone Calls Phonebook Sound / Display Settings Safety settings Multimedia (Camera) i-mode Sound Ring volume Effect tone volume Select ringtone Select effect tone Vibration settings Manner settings Mail ring duration Select Adjusting the Ring Volume ....................68 Adjusting the Effect Tone Volume .........68 Selecting a Ring Tone ............................68 Selecting a Effect Tone..........................69 To display the Display menu On the Standby display, or “Display” C[Menu] ] Setting a Vibrator ...................................70 Activating the Manner Mode .................70 Setting the Ringing Operation for Incoming Mail .........................................71 Setting Sub Display................................73 Setting Menu Display .............................75 Setting Backlight ....................................75 Data box Setting Color Scheme ............................75 a From the Index Search from the index when you know the names of functions or services. ..125 ..134 , 130 132, ..135 , 130 , 132 , 132 ..126 ..126 , 130 , 130 Folder list (Meody)..................150 Folder list (Moving/i-motion) ...150 Mail list (Received)..................129 Mail list (Sent).........................135 Mail list (Unsent).....................137 Software list ...........................149 Sound .........................................68 Effect tone volume ...................68 Mail ring on/off .........................72 Manner mode ..........................70 Ring volume.............................68 Ringing time.............................72 Selecting a effect tone .............69 Selecting a ring tone ................68 Select On the Stand-by display, or “Sound” C[Menu] ] Setting Fonts of Dial Characters ...........74 i-appli Main display Sub display Font Menu style Backlight Color scheme To display the Sound menu Setting the Ringing Time........................72 Mail Display How to Read/Refer to This Manual How to use this manual In this manual, operations of your FOMA phone are explained in the structure as shown below: • Screen displays and illustrations described in this manual are for reference. The actual ones might differ. Title Shows the title Shortcut operation Shows button operation from the Stand-by display. Description of functions Provides detailed explanation of each function. Supplementary description of functions Description of operations Provides the operation number and operation method. > P34 Index tab Shows the chapter title. These titles are described in the tabs on the cover. How to enter the menu C#1 Supplementary description of functions Information Gives necessary information, notes, and supplementary explanation. Screen Shows the screen displayed in the process of or after an operation. ✽ The above page is a sample. Contents/Precautions Contents/Precautions Contents Before using your FOMA phone....................... Rear side of Front Cover For those who use the FOMA phone for the first time ........................................... Rear Side of Front Cover How to Read/Refer to This Manual ...................................................... 1 Contents ............................................................................................. 4 Features of FOMA L601i...................................................................... 6 Making Full Use of FOMA L601i!.......................................................... 8 Safety Precautions (Always follow the safety precautions.)................. 10 Notes on Handling............................................................................. 20 Intellectual Property Rights ................................................................ 23 Accessories and Main Options .......................................................... 25 Confirming before use......................................... 27 • Adjusting the Ring Volume • Adjusting the Effect Tone Volume • Setting a Ring Tone • Setting an Effect Tone • Setting a Vibrator • Activating the Manner Mode • Setting Ringing Operations for Incoming Mail • Setting Ringing Time • Setting Main Screen • Setting Sub Display • Setting Fonts of Dial Characters • Setting Menu Style • Setting Backlight • Setting color Scheme Settings ................................................................ 77 • Call/Answer • Call Feature • Video Phone • Date & Time • Network (for overseas use) • Changing a Host from i-mode • Others Settings • Security • • Phone Parts and Functions • Display • Menu Operations • How to Use the Soft Keys • Main Side Button Operations • Using the UIM (FOMA Card) • Attaching/Removing the Battery Pack • Charging the FOMA Phone • Turning Power ON • Turning Power OFF • Clock/Time • Using Caller ID Notification Service • Own Number Safety settings ..................................................... 95 Making Calls/Receiving Calls.............................. 45 • Notes for when using the camera • Using the Camera • Taking Still Images • Shooting Moving Images • Making Calls • Receiving Calls • Using Public mode (power off) Making/Receiving Video-phone Calls ................ 51 • About Video-phone • Making Video-phone Calls • Receiving Video-phone Calls • Changing Settings for Video-phone Calls Phonebook........................................................... 57 • Adding to Phonebook • Searching for Phonebook Entries • Checking the Number of Saved Phonebook Entries • Setting Phonebook • Setting Groups • Displaying Own Number Sound/Display ..................................................... 67 • Passwords • Preventing the Phone from Activating the Operation of Function • Other Safety Settings Multimedia (Camera) ........................................... 99 i-mode ................................................................ 109 • i-mode Menu • What is i-mode? • Displaying the iMenu display • Displaying Sites from Bookmark • Displaying Screen memo • Displaying Last URL • Displaying Internet Web Pages • Displaying MessageR/F • Checking Whether Center Holds MessageR/F • Setting Functions of i-mode • Displaying Sites • How to See/Use Sites • Using My Menu • Changing i-mode Password *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Contents/Precautions • Mail Menu • i-mode Mail • Displaying Mail in Inbox • Displaying Mail in Outbox • Displaying Mail in Unsent message • Composing Mail • Checking New i-mode mail and Message • Receiving Selected Mail • Checking whether Center Holds SMS • Changing Mail Settings i-appli ................................................................. 147 • What is i-appli • Downloading i-appli from Sites • Starting i-appli • Using Caller ID Notification Service • Using Caller ID Request Service • Using Set Arrival Act • Selecting Arrival Call Act • Registering Additional Services • Registering Additional Guidance • Using English Guidance • Using Service Dialing Number • Using Call Barring Data Transmission............................................. 199 • Data Transmission Available from the FOMA phone • Before Use • Glossary of Data Transmission Terms • Preparation Flow for Data Transmission • AT command Data box............................................................. 153 Entering Characters........................................... 205 • Introduction of Data box • Displaying/Managing/Editing Images • Playing back/Managing/Editing Moving Images/i-motion • Playing back/Managing/Editing Melody • Caution on Use of the miniSD Memory Card • Inserting/removing miniSD memory card • Playing back/Editing Data on the miniSD Memory Card • Playing back i-motion (including of music file) downloaded by other devices in FOMA phone • Entering Characters • List of Character Assignment of Dial Buttons Overseas Use..................................................... 213 • Network Settings • International Roaming Service • Using the FOMA Phone Overseas Appendix............................................................ 223 • Using Schedule • Using Memo • Using Date Search • Using Date Counter • Menu list • Pre-installed data • List of Terms • Symbol/Special Character List • Pictograph and Emoticon List • Common Phrase List • Kuten Code List • List of city in World time • Multiaccess Combination Patterns • Multitask Combination Patterns • Service Available with FOMA Phones • Introduction of Data Link • Troubleshooting • Error Messages • Introduction of Options and Related Equipment • Warranty and Maintenance Services • Specific Absorption Rate of the Mobile Phone • Export/Re-export regulations of Japan and USA Network Service ................................................ 189 Index/Quick Manual .......................................... 305 • Available Network Services • Using Voice Mail • Using Call Waiting Service • Using Call Forwarding Service • Using Nuisance Call Barring Service • Index Tools................................................................... 171 • Using Alarm • Setting the Custom Menu • Using the Infrared Exchange Function • Using Calculator • Using Unit Converter • Using World Time • Using Stop Watch • Using the miniSD Memory Card Stationery........................................................... 181 Contents/Precautions Mail..................................................................... 127 • Quick Manual Contents/Precautions Contents/Precautions Features of FOMA L601i FOMA (Freedom Of Mobile multimedia Access) is the name of the DoCoMo service based on the W-CDMA format, authorized as one of the world’s standards for third-generation mobile telecommunication systems (IMT-2000). i-mode Function Viewing sites > P120 Main Futures Video-phone > P52 This is on-line service to view the information via connecting the site or homepage by operating the button simply. You can have a conversation with the other party seeing the face each other. You can also let the other party’s voice heard from the speaker or the other party see the landscape around you by rotating the camera. i-mode mail > P139 You can compose and send i-mode mail. Also, you can attach images, moving images and melodies for sending. i-motion > P125 Whole Range of Network Services You can obtain images and music from sites or Internet web pages. Voice Mail (Charged) > P190 i-motion Mail > P139, P140 Call Waiting Service (Charged) > P192 You can attach moving images shot by the camera or imotion movies obtained from sites or Internet web pages to i-mode mail for sending. SMS (Short Messages) (Monthly fee Free) > P141 Call Forwarding Service (Free) > P193 i-appli > P148 You can download and use a variety of i-appli software programs from sites. For example, you can download and enjoy a variety of games. *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Contents/Precautions Camera Functions > P101, P106 You can shoot still images and moving images using the rotatable camera (1,300,000 effective pixels and 1,300,000 recording pixels). You can shoot not only a person or landscape but also yourself by rotating the camera. You can use various functions such as adjusting images, zooming images, special effects when you shoot images. Compatible with miniSD Memory Card > P166, P179 You can save still images/moving images shot by the camera or video camera of the L601i phone and melodies by using a miniSD memory card (option). Saved data can easily be exchanged between the L601i phone and a personal computer. You can save the i-motion or music file composed by external device in miniSD memory, and then play them in FOMA phone. (You might not play the files if the condition to play doesn't meet.) Contents/Precautions International Roaming > P214 You can make/receive voice/video-phone calls, perform i-mode communication, exchange i-mode mail and SMS messages and perform data transmission with a personal computer connected to your FOMA phone abroad with the same phone number. Moreover, subscribers of the Voice Mail or Call Forwarding Service can use the network services. Using the Infrared Exchange > P174 You can exchange the data with FOMA handset via Infrared. To display a character in phonebook > P58 In a phonebook, you can set the image and the character for each entry. You can make your own character by changing “Face”, “Hair”, “Tops”, “Bottoms”, “Accessory” and “Scenery”. Useful Functions for Overseas Use Unit converter > P176 You can convert a value of currency, surface, length, weight, temperature, volume or velocity from one unit to another. You can use Unit converter in confirming a price converted into yen when you shop overseas. World time > P178 You can check the date and time of 58 cities in the world. Also, a world map is displayed so that you can confirm the locations of cities and the national flags. You can use Global Clock in confirming the date and time and the location of your next destination on a trip. Dual clock display > P73 You can display the time of two cities on the Stand-by display at the same time. For example, you can view the time difference by setting the city of a stay place. Contents/Precautions Contents/Precautions Making Full Use of FOMA L600i! "Video-phone", communication seeing the face each other. > P52 Contents/Precautions Contents/Precautions Simple and Easy Camera Function > P100 Contents/Precautions Contents/Precautions Safety Precautions a The following symbols show specific directions: (Always follow the safety precautions.) a Before using the FOMA phone, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place for later reference. a Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary damage to the property. a The symbols below indicate the levels of danger or damage that can be caused if the particular precautions are not observed. Danger 10 This symbol indicates that incorrect handling will almost certainly cause death or serious injury. Warning This symbol indicates that incorrect handling poses a risk of causing death or serious injury. Caution This symbol indicates that incorrect handling poses a risk of causing injury or damage to the product or property. Denotes things not to do (Prohibition) Don’t Do not disassemble No wet hands Avoid water Do Pull the power plug out Denotes not to disassemble. Denotes not to touch with wet hands. Denotes not to use where it could get wet. Denotes mandatory instructions (matters that must be complied with). Denotes to pull the power plug out of the outlet. a “Safety Precautions” are divided into the following six sections: General precautions for FOMA phone, batteries, adapters/chargers, and UIM ............................... P11 Precautions for FOMA phone ............................. P13 Precautions for batteries ..................................... P15 Precautions for adapters/chargers ...................... P17 Precautions for UIM ............................................ P18 Notes on using near electronic medical equipment.............................................. P19 Contents/Precautions Don’t Danger Do Do not disassemble Otherwise, the devices may deform or malfunction, battery may leak, overheat, burst, or catch fire, or performance and longevity may deteriorate. Also, part of the case might be heated, causing bare skin burns. Use only the batteries and adapters / chargers approved by DoCoMo for the FOMA phone. If you use any type of battery, adapter or charger other than the specified one, the FOMA phone, battery or other devices may leak, overheat, burst, catch fire, or get damaged. Battery Pack L01 FOMA AC Adapter 01 FOMA AC Adapter 01 for both overseas and domestic usage FOMA DC Adapter 01 • For other specified products, contact a handling counter such as a DoCoMo shop. Do not disassemble, modify or solder the FOMA phone or accessories. Accidents such as fire, injury, electric shock, or malfunction may result. The battery may leak, overheat, bust or catch fire. Do not use or leave the FOMA phone or accessories in places where it is exposed to direct sunlight, or in extremely high temperatures such as inside a car in the summer heat. Avoid water Do not let the FOMA phone or accessories get wet. If liquids such as water or pet urine get onto them, overheating, electric shock, fire, malfunction, injuries or others may result. Pay attention to the place of use of the way of handling. Warning Don’t Do not use near places such as gas stations where there is danger of fire or explosion. If used in dusty places or where there are flammable gases such as propane or gasoline, explosions or fire may result. Next Page 11 Contents/Precautions General precautions for FOMA phone, batteries, adapters/chargers, and UIM Contents/Precautions Contents/Precautions 1. Pull the power plug off the outlet or socket. 2. Shut down the power to the FOMA phone. 3. Remove the battery pack from the FOMA phone. If you use the devices with these symptoms not handled, they may overheat, burst, or catch fire, or the battery may leak. Warning Don’t Do not place the batteries, the FOMA phone, adapters/chargers, or UIM in microwave ovens or high-pressure containers. The battery may leak, overheat, burst, or catch fire. The FOMA phone or the adapter/charger may overheat, smoke, or catch fire, or its circuit parts may burst. Don’t Do not throw the FOMA phone or accessories, or subject them to severe shocks. Caution Do The battery may leak, overheat, burst, catch fire, or cause damage to the equipment. Don’t Be careful not to let electroconductive materials (metal pieces, pencil leads, etc.) contact with the charging terminal or external connecting terminals. Also, make sure that those are not entered into the inside of the FOMA phone. Short-circuit could cause catching fire or malfunction of the FOMA phone. If children use the FOMA phone or accessories, a guardian should explain the safety precautions and correct operations. The guardian should also make sure that the instructions are followed during use. Otherwise, injury may result. Don’t Do not place the FOMA phone or accessories on unstable locations such as wobbly tables or slanted locations. The FOMA phone or accessories may fall, resulting in injury or malfunction. Do Keep out of the reach of babies and infants. Accidental swallowing or injury may result. Do 12 If the FOMA phone or accessories begins to emit an odor, overheat, discolor, deform, etc., while being used, charged, or stored, take the countermeasures as follows; Don’t Do not store in humid or dusty places, or in high temperature environments. Malfunction may result. Contents/Precautions Caution Do Temperature of the FOMA phone, battery pack or adapter /charger may rise if charging the battery, shooting moving images, playing back or using the video phone, i-mode or iappli repeatedly or continuously for a long time. Do Electronic devices that may be affected: Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices. If you are using an implanted cardiac pacemaker, implanted defibrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from the radio waves. Precautions for FOMA phone Warning Don’t Do Otherwise, electronic devices and electronic medical appliances may be adversely affected. If the Auto Power ON function is set, deactivate the setting, then turn the power off. For use inside medical facilities, make sure that you comply with their regulations. Turn off the FOMA phone when near highprecision electronic devices or devices using weak electronic signals. The FOMA phone may possibly cause these devices to malfunction. Prolonged direct contact with a high temperature part may cause redness, itching, rash, etc. on skin depending on your physical conditions or predisposition. Be careful especially when using the FOMA phone connected to the adapter / charger continuously for a long time. Turn off the FOMA phone in places where use is prohibited such as in airplanes and hospitals. Contents/Precautions You may be punished for using the FOMA phone in airplanes, which is prohibited by law. If you have any implanted electronic medical equipment, do not place your FOMA phone in a chest pocket or inner pocket. If the FOMA phone is positioned close to electronic medical equipment, it may cause that equipment to malfunction. Next Page 13 Contents/Precautions Contents/Precautions Do not shine the light close to eyes. Warning Don’t Do For those with weak heart conditions, the vibrator and ring volume must be adjusted carefully. Those functions may cause an effect on the heart. Don’t Don’t Do not operate the FOMA phone while driving a vehicle. Operating a mobile phone during driving has been prohibited since November 1, 2004 according to the revised Road Traffic Law. During driving, make sure that you activate Public mode (power off) or the Voice Mail Service. Don’t Do If thunder starts to rumble while you are using the FOMA phone outdoors, turn the power off, and move to a safe place. Otherwise, you could be struck by lightning or suffer an electric shock. His/Her eyes may possibly be affected. Other infrared devices may operate erroneously if the infrared data port is pointed at them during transmission. Do Do not put the FOMA phone in the place where it could be affected by an expanded airbag, etc., on the dashboard. If the airbag expands, the FOMA phone could hit you and others, causing accidents such as injury and the FOMA phone could become damaged. Do not directly point the infrared data port at someone’s eyes during transmission. When talking on the speaker phone, be sure to keep the FOMA phone away from your ear. Doing so can damage eyesight. Also, accidents such as injury might occur if someone is startled or dazzled by the light. Caution Do not swing the FOMA phone by its strap. Don’t The FOMA phone may hit you or persons around you, and accident such as injury or malfunction may result. Otherwise, your hearing could be impaired. 14 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Contents/Precautions Caution Do Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA phone immediately, and then seek medical attention. Metals are used for the following parts: Where it is used Material Navigation Button Around the camera Earpiece/Speaker and their surrounding Don’t Aluminum (coated) Do Accidents such as injury or malfunction may result. Precautions for batteries a Check the description on the label of the battery pack for the type of battery. Chrome plating Description Li-ion (Li-polymer) Do not allow liquids such as water, or foreign materials such as metal pieces or flammable materials to get into the UIM insertion slit or miniSD memory card slot of the FOMA phone. Do Electronic devices in some types of cars can be affected by use of the FOMA phone. If the battery fluid gets into your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately. Otherwise, the loss of eyesight may result. For safety’s sake, do not use the FOMA phone inside such cars. Do not throw the battery into fire. Don’t Don’t Type Lithium-ion battery (Lithium-polymer battery) Danger Fire, electric shock or malfunction may occur. Do Be careful not to let your finger or the strap get caught when you open and close the FOMA phone. The battery may leak, overheat, burst or catch fire. Do not place magnetic cards or similar objects near the FOMA phone or between phone parts. Next Page 15 Contents/Precautions Information on magnetic cards such as cash cards, credit cards, telephone cards and floppy disks may be deleted. Contents/Precautions Contents/Precautions Danger Do Don’t Do not let any metal such as a wire contact the terminal. Also, do not carry or store the battery together with a metal necklace. Otherwise, the battery may leak, overheat, burst or catch fire. The battery may leak, overheat, burst or catch fire. Do Don’t Do not pierce it with nails, hit it with a hammer, or step on it. Don’t The battery may leak, overheat, burst or catch fire. Warning Do If the battery fluid comes in contact with skin or clothes, immediately stop using, then wash affected areas thoroughly with clean water. The battery fluid is harmful to skin. 16 If it leaks or emits an odor, immediately stop using the battery and keep it away from fire. The battery fluid, being flammable, may catch fire and cause an explosion. The battery may leak, overheat, burst or catch fire. Do not use excessive force to attach the battery to the FOMA phone when you cannot attach it successfully. Also, check that the battery is the right way round when you attach it. If charging is not completed at the end of the specified charging time, stop charging. Caution Don’t An exhausted battery should not be disposed of with other waste. The battery may catch fire or destroy the environment. After insulating the battery terminals with tape, bring them to a handling counter such as a DoCoMo shop or dispose of them in accordance with local waste disposal regulations. Contents/Precautions Warning Don’t Never short-circuit the charging terminals when the adapter is plugged into the power outlet or cigarette lighter socket. Also, never touch the charging terminals with fingers or other bare skin. Pull the power plug out Liquid inside the charger may cause electric shock, smoke, or fire. Do Fire, malfunction, electric shock or injury may result. No wet hands Do not touch the power cord of the adapter/charger, or power outlet with wet hands. Do Do not use the AC adapter in steamy places such as a bathroom. When the adapter/charger is not to be used for a long period of time, unplug the power cord from the outlet. Otherwise, electric shock, fire, or malfunction may result. Don’t Do not use a damaged adapter/charger cord or power cord. Electric shock, overheating or fire may result. Use the adapter/charger at the specified VAC. Otherwise, fire or malfunction may result. When using the FOMA phones overseas, use FOMA AC Adapter 01 for both overseas and domestic usage. AC adapter: 100 VAC FOMA AC Adapter for both overseas and domestic usage: 100 to 240 VAC (Connect only to home AC outlet) DC adapter: 12/24 VDC (For negative (-) grounded vehicles only) Electric shock may occur. Pull the power plug out When plugging the AC adapter into the power outlet, firmly plug it in, taking care not to contact with metal straps or the like. Otherwise, electric shock, short-circuit or fire may result. Electric shock or injury may result. Don’t If liquids such as water get in the charger, unplug the power cord immediately from the outlet or cigarette lighter socket. Do If a fuse of the DC adapter has blown, replace it with a specified fuse. Otherwise, catching fire or malfunction may result. For the specified fuse, see the user’s manual. Next Page 17 Contents/Precautions Precautions for adapters/chargers Contents/Precautions Contents/Precautions Warning Do The DC adapter is for use only in a negative (-) grounded vehicle. Do not use them in a positive (+) grounded vehicle. Don’t If you pull the plug out by the cord, the cord may be damaged, which could result in electric shock or fire. Fire may result. Keep the power plugs dust-free. Don’t Place the charger on a stable location during charging. Do not cover or wrap the charger in cloth or bedding. Don’t Precautions for UIM Caution The FOMA phone may become separated, or the charger may overheat, leading to fire or malfunction. If it starts to thunder, do not touch the FOMA phone and adapter/charger. Don’t You might be struck by lighting or suffer an electric shock. Caution Pull the power plug out Before cleaning, pull the plug out of the power outlet or cigarette lighter socket. Otherwise, electric shock may result. 18 Do not place heavy objects on the adapter/charger cord and power cord. Electric shock or fire may result. Otherwise, fire may result. Do Always hold the plug when pulling the adapter/charger out of the power outlet or socket. Do Be careful when removing the UIM (IC portion). Your hand or finger may be injured. Contents/Precautions • If the Auto Power On function is set, deactivate the setting, then turn the power off. a The description below meets “Guidelines on the Use of Radio-communication Equipment such as Cellular Telephones – Safeguards for Electronic Medical Equipment” by the Electromagnetic Compatibility Conference Japan. If you use an implanted cardiac pacemaker or implanted defibrillator, use the mobile phone 22cm or more away from an implanted cardiac pacemaker or implanted defibrillator. Do Operation of an implanted cardiac pacemaker or implanted defibrillator can be affected by radio waves. Warning Do Do Operation of an implanted cardiac pacemaker or implanted defibrillator can be affected by radio waves. Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators (outside medical establishments for treatment at home, etc.) should check the influence of radio waves upon the equipment by consulting its manufacturer. Comply with the following in hospitals or health care facilities: Operation of electronic medical equipment can be affected by radio waves. Turn off the phone in crowded areas such as inside trains during rush hour, as someone with an implanted cardiac pacemaker or implanted defibrillator may be near you. Do • Do not carry the FOMA phone into operating rooms, intensive care units (ICU) or coronary care units (CCU). • Turn off the FOMA phone in hospital wards. • If there is any electronic medical equipment near you, turn off the FOMA phone even when in a location such as a lobby. • Comply with any regulations of hospital and health care facilities instructing you not to use or carry in a mobile phone. 19 Contents/Precautions Notes on using near electronic medical equipment Contents/Precautions Contents/Precautions Notes on Handling General notes a Do not let the equipment get wet. The FOMA phone, battery and adapter/charger, UIM (FOMA card) are not waterproofed. Do not use them in environments, which are high in humidity such as in bathrooms, and do not allow them to get wet from rain. Furthermore, if carrying them against your body, the internal parts may become corroded if exposed to body perspiration. If the parts are found to have been damaged due to exposure to the liquids, any repairs will not be covered by warranty, or repairs may not be possible. This may be repaired at a cost if repairs are possible. a Use a dry soft cloth to clean the equipment. • The screen of the FOMA phone sometimes has a special coating so that it is easier to see. If you rub it roughly with a dry cloth, it might be scratched. Take care of the way of handling, and use only a dry, soft cloth such as used for cleaning glasses. When the FOMA phone is left with water drops or stains on the display, smear might be generated or its coating might be peeled off. • Do not use alcohol, thinner, benzene, detergent or other solvents for cleaning, otherwise the printing may be removed or discoloration may result. 20 a Occasionally clean the connecting terminals of the equipment using a dry cotton swab. If the connector terminal becomes soiled, the connection might deteriorate so that the power goes off or the battery does not charge fully. Wipe the connector terminal with a dry cloth or cotton swab. a Do not place the FOMA phone near an air conditioner outlet. Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. a Do not place the FOMA phone in places where it may be subjected to excessive pressure. Do not place the FOMA phone in a bag along with many other articles or in a trouser pocket, because this can damage the LCD display and internal circuitry. Malfunctions caused by such damage are not covered by the warranty. a Do carefully read each instruction manual attached to the battery or adapter/charger. Notes on handling the FOMA phone a Avoid using in extremely high or low temperatures. The FOMA phone should be used within a temperature range of -20 °C to 60°C and a humidity up to 85%. Contents/Precautions We take no responsibility for any loss of the stored data items. a Do not sit with the FOMA phone in your trousers or skirts pocket. Do not place the FOMA phone under heavy objects in a bag. Malfunction may result. a Make sure that nothing, such as a strap, gets caught between the parts of the FOMA phone when you close it. Otherwise, malfunction or breakage may result. a The FOMA phone becomes warm during use or charging but this is not an abnormality. Use the FOMA phone as it is. a Do not leave the FOMA phone with a camera pointing direct to the sunlight. Pixels may be discolored or burns may result. Notes on handling batteries a Batteries have a limited life. If the usable time of your FOMA phone is extremely short even when the battery is fully charged, replace the battery. Make sure that you only buy the specified battery. a Charge the battery in a place with an ambient temperature of 0°C to +40°C. a Make sure that the battery is charged when you use the FOMA phone for the first time or have not used it for a long period of time. a The usable time of the battery varies depending on the usage environment or its remaining life. a Store the batteries in a well ventilated place out of direct sunlight. When you do not use the battery for a lengthy period of time, remove it from the FOMA phone with the battery power completely drained, and store it in the plastic bag wrapping the battery pack. Notes on handling chargers and adapters a Charge the battery in a place with an ambient temperature of 0°C to 40°C. a Charge the battery where: • There is excessive humidity, vibration, and dust. • There are no ordinary phones, television sets or radios nearby. Next Page 21 Contents/Precautions a The FOMA phone, if operated near ordinary phones, televisions or radios that are in use, may affect them. You should operate your FOMA phone as far away from such equipment as possible. a It is recommended that you make separate notes of the information stored in the FOMA phone and keep such notes in a safe place. Contents/Precautions Contents/Precautions a During charging, the adapter or charger may become warm. This is not an abnormality, so continue charging. a Do not use the DC Adapter for charging the battery when the car engine is not running. The car battery could go flat. a When using the power outlet having the disengaging prevention mechanism, observe the instructions given in that instruction manual. a Do not give a strong shock. Also, do not deform the charging terminal. Malfunction may result. a It is recommended that you make separate notes of the information stored on the UIM and keep such notes in a safe place. We take no responsibility for any loss of the stored data items. a For the environmental protection, bring any unneeded UIMs to a handling counter such as a DoCoMo shop. a Avoid using in extremely high or low temperatures. a Do not damage, carelessly touch, or shortcircuit the IC. Data might be lost or damage to the IC could result. Notes on handling the UIM a Never use more force than necessary when detaching the UIM. a Do not use unnecessary force when inserting it into the phone. a The UIM may become warm during use, but this is not a sign of a malfunction. Continue using it as it is. a The warranty does not cover damage caused by inserting the UIM into some other types of IC card reader/writer. a Always keep the IC portion clean. a Use a dry soft cloth to clean the equipment. 22 a Do not drop the UIM or subject it to strong impacts. Malfunction may result. a Do not bend the UIM or place heavy objects on it. Malfunction may result. Notes on handling the Camera You may be imposed punishment according to the law and rule (such as nuisance prevention ordinance) if you use the FOMA phone to give a remarkable nuisance and misdeed to the public. Contents/Precautions Intellectual Property Rights • “Multitask” is a trademark of the NEC Corporation. • “Catch phone” (Call Waiting Service) is a registered trademark of Nippon Telegraph and Telephone Corporation. • Java and Java related trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. • miniSDTM is a trademark of SD Association. Contents/Precautions Please respect the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. Copyrights and Rights of Portrait You have no right to copy, modify, or distribute the contents of which a third party holds the copyright such as text, images, music, or software downloaded from web pages on the Internet, or images shot by the cameras of this product without permission from the copyright holder except for when the copy or quote is for personal use that is allowed by the Copyright Law. Note that it may be prohibited to shoot or record live performances or exhibitions even for personal use. Make sure that you refrain from taking portraits of other persons and distributing such portraits over the Internet without consent, as this violates portrait rights. Trademarks • “FOMA”, “mova”, “i-mode”, “i-appli”, “i-motion”, “i-motion Mail”, “MessageF”, “i-melody”, “mopera”, “mopera U”, “WORLD CALL”, “WORLD WING”, “Deco-mail” “Public mode”, “My DoCoMo” and the logos of “FOMA”, “i-mode”, and “i-appli” are trademarks or registered trademarks of NTT DoCoMo, Inc. • NetFront and are trademarks or registered trademarks of ACCESS Co.,Ltd. In Japan and other countries. • Microsoft, MS, and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • Windows XP is abbreviation of Microsoft® Windows® XP Professional operating system or Microsoft® Windows® XP Home Edition operating system. • Windows 2000 is Microsoft® Windows® 2000 Professional operating system. • Windows Me is abbreviation of Microsoft® Windows® Millennium Edition operating system. • Windows 98 is abbreviation of Microsoft® Windows® 98 operating system. • Windows 98SE is abbreviation of Microsoft® Windows® 98 operating system SECOND EDITION. • Sometimes transcribed like Windows XP, 2000, Me, 98SE, 98. 23 Contents/Precautions Contents/Precautions • Other company names and product names described in the text are trademarks or registered trademarks of those companies. Others • This product contains NetFront v3.0 for FOMA Internet browser software of ACCESS Co., Ltd. NetFront v3.0 is a product of ACCESS Co., Ltd. Copyright© 1996-2006 ACCESS Co., Ltd. • Some part of the software in this product contains modules developed by Independent JPEG Group. • Adobe and Acrobat Reader are trademarks or registered trademarks of Adobe systems Incorporated in the US and other countries. • This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial use of a consumer to – encode video in compliance with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or – decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA, LLC. • Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations: 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 24 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338 Contents/Precautions Contents/Precautions Accessories and Main Options• L601i Handset (with Warranty and Rear Cover L01) • CD-ROM for L601i • Battery Pack L01 • Instruction manual • Quick Manual included (P316) • FOMA AC Adapter 01 Compatible with standard • FOMA AC Adapter for Abroad 01 (With Warranty card and Instruction Manual) Other Options > P297 25 Confirming before use Phone Parts and Functions .................. 28 Display ................................................... 31 Menu Operations................................... 34 How to Use the Soft Keys..................... 34 Main Side Button Operations ............... 35 Using the UIM (FOMA Card) ................. 36 Attaching/Removing the Battery Pack .......................................... 37 Charging the FOMA Phone................... 39 Turning Power ON................................. 43 Turning Power OFF ............................... 43 Clock/Time ............................................ 43 Using Caller ID Notification Service ..... 43 Own Number.......................................... 43 27 Confirming before use Ç)égópëOÇÃämîF Phone Parts and Functions Confirming before use The Name and function of each part of the FOMA phone are as follows. • This manual describes operation of each button using an illustration of the button. 28 Dimensions (H x W x D): Approx. 89 x 47 x 25 mm When closed excluding a projection part Weight: Approx. 120g With battery attached Confirming before use : When you use speakerphone, you should not close the ear. 2 Main display > P31 3 Camera For shooting still images and moving images, and for sending images on a video-phone call. Rotate the camera to take a shot. > P52, P101, P106 4 Earphone/Microphone terminal For connecting a Flat-plug Earphone/Microphone Set with Switch (option) ,etc. Do not forcibly pull the earphone/microphone cover . : You can rotate it forward or inward in the status of opening. 5 MMail button Press from the Stand-by display to bring up the Mail menu. > P128 Press from the Stand-by display for two seconds to receive i-mode mail. > P117, P143 6 KNavigation button For selecting an item and scrolling the display. The following operations can be performed from the Stand-by display: UUp button : The phonebook list screen appears. > P60 DDown button : The custom menu screen appears. > P173 LLeft button : Received call screen appears. > P78 RRight button : Redialed call screen appears. > P79 Confirming before use 1 Earpiece/Speaker Sounds for incoming calls and alarm. Also, you hear the other party’s voice through this speaker when using the speaker phone. 7 TVideo-phone button Press to make/receive video-phone calls. > P52, P54 Press on the Stand-by display to view the other party that you made the latest call. Press to switch modes, etc. in entering mode (Pictograph/Symbol/Emoticon). 8 CMenu/Select button Press on the Stand-by display to bring up the Main menu. > P34 An operation displayed in the soft key area can be executed. > P34 9 AStart button Press to make/receive voice calls. > P46, P48 Press on the Stand-by display to view the other party that you made the latest call. Switch between full-pitch and half-pitch while characters are entered. Next Page 29 Confirming before use Ç)égópëOÇÃämîF Confirming before use ! FEVolume buttons For adjusting the volume > P35 " Dial button # GCamera button Press from the Stand-by display to start up a camera. > P101 $ * (asterisk) button Press to enter “ ” and to switch between upper case and lower case while characters are entered. % Microphone For speaking to the other party. For recording sound when shooting moving images by the camera. Also, press to clear entered text. ~ PPower/End button Press to turn the power on. Press and hold for at least 2 seconds to turn the power off. > P43 Press to end calls and end functions. + #(Sharp)/ Manner Mode button Press and hold for at least one second from the Stand-by display to activate/deactivate the Manner Mode. > P70 Also, press to enter “#” and to start a new line while characters are entered. , Connector terminal For connecting adapters and cables. & Ii-mode button Press from the Stand-by display to bring up the imode menu. > P110 Press for two seconds from the Stand-by display to bring up software list screen. > P149 Press from the entering character mode to switch the mode (Hiragana/Katakana/English/ Number) An operation displayed in the soft key area can be executed. > P34 - Sub display > P32 ( NMultitask button Press to bring up the Task Manager. Press and hold for at least one second to bring up the New Task screen. > P269 < Infrared data port Point this port to the other device for infrared exchange. > P174 ) QClear button Press to return to the previous operation. . Light Press to light up for shooting by the camera. / Antenna Do not cover the antenna with your hands, etc. to use the phone in better conditions. : Strap hole ; Rear cover = miniSD memory card slot Open the cover to insert a miniSD memory card. > P167 30 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Confirming before use Display : Displayed while “All Call Rejection” is activated. : Displayed while a function (Task) is activated. (White): Displayed when the i-mode Center holds mail. (Pink): Displayed when the box for i-mode mail at the imode Center is full. (White): Displayed when the i-mode Center holds a MessageR (Request). (Pink): Displayed when the box for MessagesR. (Request) at the i-mode Center is full. (White): Displayed when the i-mode center holds a MessageF (Free). (Pink): Displayed when the box for MessagesR/F at the i-mode Center is full. (White): Displayed when the i-mode Center holds mail, a messageR (Request) and a messageF (Free). (Pink): Displayed when the boxes for i-mode mail, MessagesR (Request) and MessagesF (Free) at the imode Center are full. (White): Displayed when unread mail exists. (White): Displayed when an unread SMS message exists. (White): Displayed when unread mail and SMS message exist. (Pink): Displayed when the inbox is full. : Displayed when the area for SMS messages in the UIM (FOMA card) is full. 1 2 34 5 6 7 8 9 ! " # $ %& ( ) : Shows the level of the received radio waves. : Out of service area. : Displayed during a voice call. : Displayed during a video-phone call. : Displayed during a voice call using the speaker phone. (Blinks): while i-mode is activated. (Blinks): during i-mode transmission. : Displayed during trying dialup connection. : Displayed during dialup connection. : Displayed while an SSL-enabled page is displayed or obtained. Next Page 31 Confirming before use Main Display Confirming before use Ç)égópëOÇÃämîF Confirming before use (White): Displayed when a Voice Mail message exists. (Pink): Displayed when the box for Voice Mail messages is full. : Displayed when a vibration and a ringtone do not activate. : Displayed while an alarm is set. : Displayed when today’s schedule exists. : Displayed when an alarm is set and today’s schedule exists. (Request) is full. : Displayed while a miniSD memory card is inserted. : Displayed when an unread MessagesF (Free) exists. (Pink): Displayed when the box for MessagesF (Free) is :Displayed when an error occurs on the UIM (FOMA (White): Displayed when an unread MessageR (Request) exists. (Pink): Displayed when the box for MessagesR card). full. : Displayed when i-appli is being started. : Displayed when i-appli auto start failed. Sub Display 1 23 4 5 6 : Shows the battery level. (Pink): Displayed during Manner mode. (Blue): Displayed during Original manner mode. : Displayed when the ringtone for incoming voice call or video-phone call sounds, not activating a vibration. : Displayed the vibration for incoming call is activated to “Pattern 1” or “Pattern 2” the alarm is mute when incoming voice call or video-phone call, and the vibration operated being linked with a melody. : Displayed when a vibration and a ringtone sounds at the same time. : Shows the level of the received radio waves. : Out of service area. : Displayed during a voice call. : Displayed during a video-phone call. 32 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Confirming before use Missed call/ New received E-mail When closing the flip of FOMA handset, “X Missed call” or “X Message” is displayed. : Displayed while “All Call Rejection” is activated. (White): Displayed when the i-mode Center holds mail, MessageR/F, an unread mail, SMS, MessageR/F, or the message in answering machine exists. 1 Missed call 1 Message (Pink): Displayed when the box for mail, MessageR/F at the i-mode Center Mail, SMS, MessageR/F, or the message in answering machine is full in inbox or FOMA card (UIM card). : Displayed when an alarm is set. : Displayed when today’s schedule exists. : Displayed when an alarm is set and today’s schedule exists. : Show the battery level. (Thu) (Thu) • When you open the flip on displaying “X Missed call”, you can view the time or phone number in main display. You can view the call history by pressing C. If you press I [Close], “X Missed call” will not be displayed anymore. • When you open the flip on displaying “X Message”, the pop up message on the subdisplay will be disappeared after confirming the screen. Information Subdisplay The various information such as clock, icons are displayed as follow. Alarm 1 12 : 34 Confirming before use : Displayed while using the speaker phone. : Displayed during trying dialup connection. : Displayed during dialup connection. • After closing the FOMA phone, the contents of sub display will be slided to other place. NTT DoCoMo 33 Confirming before use Ç)égópëOÇÃämîF Menu Operations How to Use the Soft Keys Confirming before use Example: How to set the “Stand-by display” of the “Main display”. a Selecting a function by K To execute an operation displayed in the soft key area on the Main display, press the corresponding button as below. 1. On the Stand-by display, C [Menu] ] Enlarge by using K ] C ] Highlight “Main display” by using H ] Move the cursor to “Stand-by display” by using H ] C 01/01[Sun] Mail Display Display Main display Sub display Font Menu style Backlight Color scheme Menu i-mode Soft key area 1 Stand-by display 2 Incoming call 3 Outgoing call Select Select Display Select a Selecting a function by pressing the key corresponding to the menu number 1. On the Stand-by display, C [Menu] ] Enlarge by using K ] C ] 1 ] 1 Display Display Select 34 Main display Sub display Font Menu style Backlight Color scheme Display 1 Stand-by display 2 Incoming call 3 Outgoing call Select Select Information • (Navigation icon) that indicates the directions in which you can scroll and select items using K is also displayed in the soft key area. • Items displayed in the soft key area vary depending on the display. Confirming before use Main Side Button Operations FOMA phone operation How to operate Adjust the button tone volume During standby ] FE Adjust the volume During a voice call/video-phone call ] FE a Major operations that can be performed by pressing FE/G with the FOMA phone closed Adjust the volume for moving image/melody playback While moving images/a melody is played back ] FE FOMA phone operation Scroll the List display by page How to operate Switch the display light of In stand-by (OFF > ON) ] F/G the sub display to ON/OFF In stand-by (ON > OFF) ] E Reject an incoming call Incoming call ] Press G for two seconds Adjust the volume of a ring Incoming call ] FE tone for incoming call Stop the alarm While an alarm / schedule alarm is sounding ] Press E for two seconds • The cursor is moved on some displays. Confirming before use a Main operations that can be executed by pressing FE/G with the FOMA phone opened While each List display is displayed ] FE Switch the Monthly While the Monthly Schedule Schedule displays by month display is displayed ] FE Start the camera Zoom Play back/pause moving images/a melody During standby ] Press G While the Still Image/Moving Image Finder display is displayed ] FE When moving images/a melody is paused ] G(Play back) While moving images/a melody is played back ] G(Pause) 35 Confirming before use Ç)égópëOÇÃämîF Using the UIM (FOMA Card) Confirming before use Your phone number and contracted contents for the service, etc. are recorded in the UIM. You need to insert it into the FOMA phone to make/receive calls or perform transmission. Inserting 1. Insert the UIM with its IC-side facing downwards in the direction of the arrow underneath the guide. Guide Refer to the UIM manual for details of how to use it. Inserting/Removing UIM (FOMA Card) Insert/remove the UIM after you remove the rear cover and battery pack and turn off the power of the FOMA phone beforehand (P38). • Remove the AC adapter and options beforehand. Notch Removing 1. While pressing the stopper from the above, slide the UIM in the direction of the arrow to remove it. Stopper 36 Confirming before use Information About Password of UIM You can set two passwords, PIN1 and PIN2, for a UIM. > P96 UIM Restriction Functions The UIM has a restriction function to protect your data and files. If you obtain the following types of data and files with the UIM inserted, restrictions are automatically imposed to disable them when the UIM is not inserted or when another UIM is inserted. • Images/melodies/i-motion/i-appli obtained from sites and Internet web pages • Files attached to i-mode mail messages and MessagesR/F Differences of UIM Confirming before use • When inserting or removing the FOMA card, close the flip, and then put it on your hand. Take care not to accidentally torch or scratch the IC. There are two types of UIM, the green UIM and the blue UIM. There are differences in specifications of the following functions between those UIMs: Function UIM (Green) UIM (Blue) Number of digits of the phone book that can be stored in the Up to 26 digits UIM phonebook Up to 20 digits WORLD WING Can be used Cannot be used Service dialing Can be used Cannot be used Attaching/Removing the Battery Pack Make sure that you attach the dedicated battery pack L01 for FOMA L601i to use it. 37 Confirming before use Ç)égópëOÇÃämîF Attaching Confirming before use 3. Slide the rear cover in the direction of the arrow until it clicks to attach it in place. 1. While pressing the rear cover in the direction of the arrow 1, slide it in the direction of the arrow 2. Removing 2. Insert the battery pack in the direction of the arrow 1 with the label facing upwards and 2 push it in the direction of the arrow. 38 1. While pressing the rear cover in the direction of the arrow of 1, slide it in the direction of the arrow 2 to remove it. Confirming before use Projection 1. Open the cover of the external connector terminal of the FOMA phone. : You can rotate it forward or inward in the status of opening. 2. While pressing the release buttons on both sides of the connector of the AC adapter, connect it horizontally to the FOMA phone with the arrowsengraved side facing upwards in the direction of the arrow. Information • Attach/ remove the battery pack with the FOMA phone closed and held in your hand after you turn off the power. In addition, If you attach/ remove the battery pack forcibly, it may damage the charging connector of battery. • Take care not to attach or remove the rear cover. Note that if the rear cover is forcibly, the slot of rear cover can be damaged. • For details about the battery, see the manual for Battery Pack L01. Charging the FOMA Phone Release button 3. Insert the AC adapter’s plug into a power socket. AC100V Charging Connect exclusive AC Adapter (option) to charge the battery after attaching the battery pack to the FOMA phone (P38). You need FOMA AC Adapter 01 for both overseas and domestic usage (option) separately when using the FOMA phone overseas. Next Page 39 Confirming before use 2. Take the projection of the battery pack to lift it up in the direction of the arrow. Confirming before use Ç)égópëOÇÃämîF Confirming before use • If you start to charge the battery, the charging start tone will sound. • When the battery is charged with the FOMA phone turned on, the battery level icon ( ) is displayed. After charging, the alarm sound for ending the charging will ring, and then animation is disappeared. • If you charge the FOMA phone with the power off, the animation for the battery level is displayed. When charging finishes, the charging end tone sounds and the animation ends. • When switching on the phone by charger, the following message appears depending on battery level. When "Charging" or "Charging done", the animation or mark of battery is displayed at the same time. - In case the battery is empty: “Please wait” > “Low battery Please wait” > “Charging” > “Battery charged” - In case the battery is low: “Please wait” > “Charging” > “Battery charged” • If the battery level becomes less than 10% during a videophone call, connecting the AC adapter may not charge the battery fully, and the power may go off. • Refer to the instruction manuals for FOMA AC Adapter 01 (option) and FOMA AC Adapter 01 for both overseas and domestic usage (option) for details. • When switching on the phone by charger, the stand-by screen will be returned with displaying power on animation if you press power key for at least one second in a screen of charging. Removing the AC Adapter After charging completes, disconnect the AC adapter from the FOMA phone. 1. Disconnect the connector's plug from the power socket. 2. While pressing the release buttons on both sides of the connector, remove it horizontally from the FOMA phone in the direction of the arrow. Information • When you use the FOMA phone for the first time, the battery pack is not fully charged. Fully charge the battery before using it. • When you attach the AC adapter to the FOMA phone, do not use unnecessary force. The FOMA phone and the connector may be damaged. • Do not remove the battery pack and the UIM during charging. • If the battery cannot be charged correctly, turn off the power once, remove the battery pack, and then reattach it to charge the battery again. 40 Release button Confirming before use Use the FOMA phone’s dedicated Battery Pack to get the most out of the your FOMA phone. Checking the Battery Level You can check an estimate of the battery level by the Battery Level display. • The Battery Level display indicates just an estimate of the battery level. Precautions on the Battery Pack Confirming before use 3. Close the cover of the external connector terminal of the FOMA phone. a Battery life • Batteries are consumables. The usage time of all chargeable batteries shortens slightly each time they are charged. The battery’s life is considered to be exhausted when the usage time of the battery after charging is about half the time it was at purchase. (The life of the battery is about one year. However, it might be shorter if used very frequently.) When You Need to Charge the Battery If the battery is completely flat, a message appears, flickers, and the battery alarm sounds. If you press C, the battery alarm will be stopped with disappearing the message. Information • If you set “Manner mode” or “Original manner mode” of battery alarm, the alert tone does not ring. For environmental protection, bring the exhausted battery to an NTT DoCoMo, dealer, or recycle shop. Li-ion a Do not charge for long periods of time (several days) with the FOMA phone turned on. • Do not leave the FOMA phone power on for long periods of time while charging. Otherwise, when charging finishes, the FOMA phone will attempt to receive power from the battery so that when you actually use the FOMA phone, you will be able to do so for just a short amount of time before the battery alarm sounds. If this happens, charge the battery correctly. When charging the battery again, first disconnect the FOMA phone from the AC adapter and then set it again. Next Page 41 Confirming before use Ç)égópëOÇÃämîF Confirming before use a Estimated usage time for battery The usable time of the battery varies depending on the usage environment or its remaining life. Network Stand-by time Continuous talk time FOMA / 3G Static : about 550 hrs Dynamic : about 450 hrs Voice call : about 200 min Video call : about 150 min GSM/GPRS Static : about 500hrs Voice call: 350 minutes • Continuous talk time is the estimated time when radio waves can be sent and received normally. • Continuous stand-by time is the estimated time you can use the FOMA phone in motion when it is closed and can receive radio waves normally. The standby time could be about half of this estimate depending on the battery level, function settings, other ambient conditions such as temperature, the status of radio waves in the area (weak or no radio waves, for instance) and the status of the network of the country in which you stay. The continuous standby time will be shorter if you don't insert the UIM (FOMA card). When you use i-mode communications, the talk/transmission time and standby time will be shorter. Further, even if you do not make calls or execute i-mode transmission, the talk/transmission time and standby time will be shorter if you compose i-mode mail, start up a downloaded i-appli. 42 • The continuous standby time for standstill is the average number of hours you can use the FOMA phone in standstill status when it is closed and can receive radio waves normally. • The continuous standby time for in motion is the average number of hours you can use the FOMA phone in the combined status of ”standstill”, “moving” and “out of service area” when it is closed, in an area where it can receive radio waves normally. • The talk/transmission time and standby time will also be shorter than the above-mentioned estimates when you execute data transmission or multi-access or when you use the camera or the light. a Estimated time for charging battery FOMA AC Adapter 01 Approx. 180 minutes • The estimated charging time is for when the FOMA phone is off and the battery is being charged from empty. The charging time will be longer if you charge the battery with the power turned on. a Other precautions • The battery does not have to be empty before you charge it. • Do not use any other adapter than the specified one. It may shorten the life of the battery. • Make sure the battery is charged when you have not used the FOMA phone for a long period of time because the life of the battery becomes shorter. Confirming before use Turning Power ON 1. Press P • After the Wake-up display is displayed, the Stand-by display appears. Information • When charging, you need to press and hold P for at least 2 seconds. • If “PIN code request” (P90) is set to “ON”, you need to enter Confirming before use • Before you turn on the power, make sure that the UIM is inserted and that the battery is fully charged. Clock/Time You can set the date and time and daylight saving time. See “Setting Date & Time” (P86) for details of how to set them up. Using Caller ID Notification Service The Caller ID Notification Service enables you to notify the other party of your phone number when you make a call. See “Using Caller ID Notification Service” (P194) for details of how to set it up. your PIN1 code. • If “All lock” (P90) is set to “Power on”, you need to enter your Own Number terminal security code. You can display your phone number recorded in the UIM. Turning Power OFF 1. Press and hold P for at least two seconds • The Exit display appears and the power is off. 1. On the Stand-by display, C ] 0 • See “Displaying Own Number” (P65) for details of how to change the settings on the Own Number display. Information • The time to turn off the FOMA phone will be longer. Depending on the status of network, the lead time can be different. During switching off the power, do not repeat to power on/off. 43 Making Calls/ Receiving Calls Making Calls ...........................................46 Receiving Calls.......................................48 Using Public mode (power off) ..............49 45 Making Calls/Receiving Calls • Press and hold Q for at least two second: You can switch ON/OFF the speaker phone. • I[Hold]/[Unmark] : You can put a call on hold or release hold. Making Calls 1. Enter the other party’s phone number Making Calls/Receiving Calls : Unavailable unless you are the Call waiting service subscriber. 3. P to end the call after talking. Information Menu Save Search • Q : The last digit is cleared. To clear all digits, press and hold it for at least one second. • C [Save]: You can add new phone number to phonebook. This function is activated by step 2 on page 58. • I [Search]: You can search for the phone number in phonebook. See the contents after step 3 on page 60. 2. A ] Start talking when the other party answers Talking The other party's name Ŧ1 The other party's phone number Call duration Ŧ2 EpDpNp!Ubsp Menu Save 46 The other party's picture Ŧ1: In case of the other party you don't register the information in phonebook, “Unregistered” will be displayed when receiving or making a call. Ŧ2: The picture will be displayed when you register the picture in phonebook. • If you press A after entering the number from 0 to 9 in the Enter Phone Number screen, you can make a call directly matching the the number saved in memory. • When the Flat-plug Earphone/Microphone Set with Switch (option) is attached, you can only talk on the Earphone / Microphone regardless that the speaker phone is ON/OFF. • When the call is disconnected, the alert sound sounds from a receiver. Using the Submenus of the Enter Phone Number Display 1. From the Enter Phone Number screen (see left), M[Menu] ] Select from the following submenu items Notify caller ID Set whether to notify your phone number per call. – Not notify : “#31#” is added in front of the phone number entered, but the phone number is not notified. – Notify : “ 31#” is added in front of the phone number entered, and the phone number is notified. – Cancel : The added “#31#” or “ 31#” is deleted. Making Calls/Receiving Calls Hold 1/Cancel held call 1 You can put/release the call on hold. Mute 2/Unmute 2 You can mute/unmute the voice transmitted to the other party. 1: Available for Call Waiting Service subscribers only. To use this service, go to “Using Call Waiting Service” (P192). 2: Not displayed during call is held. Making a Call From the Dialed/Received Call Record 1. From the Stand-by display, L/R/A/T ] Select a record ] A Information • See “Using the Submenu of the Received Calls display” (P78) for submenus. Information • You can make a call after inputting “#31#”(Not notify) or “ 31#” (Notify) in front of phone number. Using the Submenus of the Talking screen 1. From the Talking screen (P46), M[Menu] ] Select from the following submenu items New call You can put the current call on make and hold a call to another party. End active call You can hang up the call. Making a Call from the Phonebook 1. From the Stand-by display, L/R/A/T ] Select the other party you want to call ] A Information • To switch the phonebook list to display between the FOMA phone and UIM, select M [Menu] > “Display switch” > “Display data” on the phonebook list screen. International Calls You can make an international call easily using the DoCoMo international call service “WORLD CALL”. Next page 47 Making Calls/Receiving Calls Select prefix The number saved in “Setting the Prefix” (P83) is added in front of the phone number entered. International call The international access code saved in “International dial setting” (P84) is added in front of the phone number entered. Save You can save the entered phone number into the Phonebook. Go to step 2 on page 58 of "Adding to Phonebook". Search phonebook You can search for the phone number in phonebook. After searching, Go to step 3 on page 60 of " Searching for Phonebook Entries". Making Calls/Receiving Calls When you have signed up for FOMA service, you have contracted to use “WORLD CALL” (except those who have applied not to use it). Making Calls/Receiving Calls a How to make calls 009130 > 010 > Country code > Area code > Destination phone number > A • This service is not available with billing plans. • Application/monthly fee for WORLD CALL is free of charge. • The WORLD CALL charges are added to your monthly FOMA bill. • Contact “DoCoMo Information Center” on the back page of this manual for inquiries about WORLD CALL. • If the other party uses a specific 3G mobile phone overseas, you can make an “International Video-phone Call” by dialing out using T after following the dialing method described above. – See DoCoMo web page for the information about connectable countries and telecommunications carriers. – Images sent from the other party may blur on your FOMA phone or you may not be able to connect, depending on the other party’s phone used for the international video-phone. Making an International Call Easily • Confirm that the “Setting Prefix Dial” (P83) is set to “AUTO” and “009130010” (WORLD CALL) is set for “IDD prefix code” in “IDD prefix setting”. 1. On the Stand-by display, press and hold 0 for at 48 least one second to enter “+” 2. Enter Country code > Area code > Destination phone number ] A(T) 3. Pto end the call after talking Adjusting the Volume 1. Press FE during a call Information • The changed volume is held even after ending the call. Receiving Calls 1. When you receive a call, A Calling The other party's nameŦ1 The other party's phone number The other party's imageŦ2 Ŧ1: In case the other party you don't DoCoMo Taro register the information in phonebook, "Unregistered" will be displayed. Menu Silent Ŧ2: The image will be displayed when you register the picture in phonebook. • I[Silent]: You can set to no sound for incoming call. • A: You can put the call on hold. 2. P to end the call after talking • When the call is disconnected, the alert sound sounds from a receiver. Making Calls/Receiving Calls When you didn't get a call [Thu] DoCoMo Taro OK Close The name is not registered in phonebook cannot be displayed. • C [OK] : You can view the list of received call. • I [Close] : You can close the screen for missed call. Using the Submenu of the Ringing Display 1. From the Ringing screen (P48), M[Menu] ] Select from the following submenu items Voice mail 1 The Call is connected to the Voice Mail Service Center. Call rejection The call is disconnected without answering it. Call forwarding 2 The call is forwarded to the phone number registered. 1: If you use voice mail service menu, you should register this service in operator. For details, see “Using voice mail service” (P190). 2: If you use call forwarding menu, you should register this service in operator. For details, please refer to the “Using Call Forwarding Service” (P193). Public mode is an auto-answer service that lays stress on manners in public spaces. Once you activate Public mode (power off), the guidance is played back telling that you cannot take the call as you are currently in a place (in hospital, airplane, or in around priority seat in a train) where use is prohibited. Then the call is disconnected. • This FOMA phone does not support Public mode (Driving mode). 1. *25251 ] A • Public mode (power off) is set. (Nothing is changed in the Stand-by display.) • After setting Public mode (power off) and turning off the power, the guidance “The person you are calling is currently in an area where use is prohibited. Please try again later.” is played back for incoming calls. a To release Public mode (power off) *25250 ] A a To check Public mode (power off) for the setting, *25259 ] A When Public mode (power off) is activated When incoming a voice call, the guidance is played back to the caller telling that you are currently in an area where use is prohibited, and then the call is disconnected. When incoming a videophone call, the video- guidance is played back to the caller, and then the call is disconnected. Next Page 49 Making Calls/Receiving Calls 1 Missed call Using Public mode (power off) Making Calls/Receiving Calls Making Calls/Receiving Calls • This setting is continued until you release the setting by dialing “ 25250”. If you just switch on, this setting is not released. • The Public mode (power off) guidance is played back even when you are out-of-service area or out-of-reach of radio waves. Activating between network services and Public mode (power off) If you use Public mode (power off) and Network service at the same time, the operation will be activated as follow. Depending on the setting or calling, the network service can be preferred, so the activation of Public mode (power off) or the record of missed call may not be displayed. a Voice Mail Service Response to Incoming Voice calls Plays back the Public mode (power off) guidance to caller, and then the call is connected to the Voice mail Service Center. 1 Response to Incoming Video-phone calls Does not play back the video guidance to caller, and the call is connected without connecting to the Voice Mail Service Center. a Call Forwarding Service 50 Response to Incoming Voice calls Response to Incoming Video-phone calls Plays back the Public mode (power off) guidance to caller, and then the call is connected to the Voice mail Service Center. 1 The guidance depends one setting of Call Forwarding Service. Does not play back the video guidance for Public mode, and the call is forwarded to the forwarding destination. 2 If the destination does not support video-phone call, the call is disconnected. a Nuisance Call Blocking Service Response to Incoming Voice calls Response to Incoming Video-phone calls For the call from the phone number registered to be rejected, plays back the Call Rejection guidance, and then the call is disconnected. 3 For the call from the phone number registered to be rejected, plays back the Call Rejection guidance, and then the call is disconnected. 3 a Caller ID Display Request Response to Incoming Voice calls Response to Incoming Video-phone calls • For the caller without a caller ID, • For the caller without a caller ID, plays back the Caller ID Request plays back the video guidance guidance, and then the call is for Caller ID Request, and then disconnected. the call is disconnected. • For the caller with a caller ID, • For the caller with a caller ID, plays back the Public mode plays back the video guidance for (power off) guidance, and then Public mode (power off), and the call is disconnected. then the call is disconnected. 1: If the ring time for protecting a house or call forwarding is set to “0 second”, the caller does not hear the Public mode (power off) guidance, and the call is not recorded in call history. 2: If the ring time for a call forwarding is set to “0 second”, the call is not recorded in call history. 3: The call is not recorded in the history of received calls. Making/Receiving Video-phone Calls About Video-phone ................................52 Making Video-phone Calls.....................52 Receiving Video-phone Calls.................54 Changing Settings for Video-phone Calls ..................................55 51 Making/Receiving Video-phone Calls About Video-phone Making/Receiving Video-phone Calls Wen both you and the other party use DoCoMo videophones, you can talk seeing each other. • DoCoMo video-phones conform to 3G–324M standardized by the international standard 3G PP 1 . You cannot connect to the video-phone that uses a different format. 1 : 3G PP (3rd G eneration Partnership Project) is the regional standards organization for developing common technical specifications for third-generation mobile telecommunications systems (IMT–2000). 2 : 3G – 24M is the international standard for the third generation of mobile video-phones. • The video-phone call is activated by the speed of 64kbps. Mark Description Speaker phone ON/OFF Zoming • The voice of the other party is heard from the speaker when starting the call. • Press and hold Q for at least two seconds: You can switch ON/OFF the speaker phone. • C[Image]/C [ amera]: You can switch between Substitute image and your photo image for sending to the other party. • I[o Hld]/C [ ancel]: You can put the call on hold or release hold. 3. Press P to end the call after talking Information Making Video-phone Calls 1. Enter the other party’s phone number • The n Eter Phone Number screen (P46) is displayed. 2. T ] Start talking when the other party answers The other party's image The volume during a call Call duration Own image Menu Image Hold 52 • See “International Calls” (P48) for how to make international calls. • h Wen the Flat-plug E arphone/Microphone Set with Switch (option) is attached, you can only talk on the E arphone/ Microphone regardless of whether the speaker phone is ON/OFF. • You can listen to the voice through speakerphone in spite of the status of manner mode. Using the Submenu of the n Eter Phone Number screen See “Using the Submenus of the n Eter Phone Number screen” (P46) of voice calls for the submenus available. Making/Receiving Video-phone Calls Using the Submenus of the Talking screen Setting item/Setting at purchase > P241 End call The call is disconnected. Hold You can put the call on hold. You can cancel the function by pressing I C [ ancel]. Substitute image/Camera image You can switch to the Substitute image for sending to the other party. > P85 Camera settings You can set the camera of video phone call. You can select the icon by pressing J. After setting, press IC [ lose]. – Zoom : The camera image is zoomed. (x1/x2) – Brightness : You can change the brightness of photo images. – Night mode : You can set it up when using the camera in a dark place. Video-phone settings You can set the display of video phone call. After setting, press I D [ one]. > P84 Making/Receiving Video-phone Calls 1. From the Talking screen (P52), M [Menu] ] Select from the following submenu items – Display setting : You can set the display method for the Talking screen. • Both… : The other party’s image and your image are displayed. • Other… : Only the other party’s image is displayed. • Me… : Only your image is displayed. – Sub screen : If you select “Both” of “video-phone settings”, you can set the image which displayed each screen. • Me… : Only your image is displayed. • Other… : Only the other party's image is displayed. – Display light: You can set the lighting method of the backlight on the Talking screen. • Always on : Always lights during a call. • Terminal setting : Follows the settings on the “Main screen” of the “Backlight”. > P7 Sending image quality You can set the quality of images to be sent to the other party. – Normal : Sends images in standard quality and motion speed. – Prefer motion quality : Sends images laying stress on motion speed. Prefer motion quality is effective for moving images. – Prefer image quality : Sends images laying stress on image quality. Prefer image quality is effective if there is little motion. 53 Making/Receiving Video-phone Calls Making a iVdeo-phone call from the Dialed/Received Call Record Making/Receiving Video-phone Calls 1. On the Stand-by display, L/R/A/T ] Select a history ] T Information • See “Using the Submenu of the Received Call Record Screen” (P7 8) for the submenu. Making a iVdeo-phone Call from the Phonebook 1. On the Stand-by display U, or Search for phonebook entries (P60) ] Select a party to call ] Information • To switch the phonebook to display between the FOMA phone and UIM, select M M [ enu] > “Display switch” > Receiving Video-phone Calls 1. When you receive a call, T/A Calling video-phone The other party's nameŦ1 The other party's phone number The other party's imageŦ2 Ŧ1: In case the other party you don't DoCoMo Taro register the information in phonebook, “Unregistered” will be displayed. Menu Image Ŧ2: The image will be displayed when you register the picture in phonebook. • C[Substitute]: You can receive a call. The substitute image will be sent to the other party. • P: You can put the call on hold. The holding image will be sent to the other party. If you press C, you can answer the call. 2. P to end the call after talking “Display data” on the phonebook list screen. Information Adjusting the o Vlume 1. Press H/FE during a call. Information • The changed volume is held even after ending the call. 54 • h Wen inserting the switch of the Flat-plug E arphone / Microphone set with Switch (option), you can connect a call by earphone regardless of Speakerphone ON/OFF. • You can listen to the voice through speakerphone on manner mode. Making/Receiving Video-phone Calls • If you answer a video-phone call by pressing the switch of the Flat-plug E arphone/ Microphone set with Switch (option) when closing the flip, the image on hold will be sent. Making/Receiving Video-phone Calls Using the Submenus of the Ringing screen See “Using the Submenus of the Ringing screen” (P49) of voice calls for the submenus available. Note that “V oice mail” is not displayed for video-phone calls. Changing Settings for Video-phone Calls C] ]3 You can set the operation and display for video-phone calls. See “Setting Operation and Display for iVdeo-phone Calls” (P84) and “Selecting an Image for iVdeo-phone Calls” (P85) for details of the settings. 55 Phonebook Phonebook Phonebook Add to phonebook Search phonebook No. of phonebook Phonebook settings Group settings Own number Select Select Adding to Phonebook ............................58 To display the Phonebook menu Searching for Phonebook Entries..........60 On the Stand-by display, Checking the Number of Saved Phonebook Entries.................................63 C [Menu] ] or “Phonebook” Setting Phonebook.................................63 Setting Groups .......................................64 Displaying Own Number ........................65 57 Phonebook Adding to Phonebook C] ]1 Two types of phonebooks are available, the phonebook saved in the handset of the FOMA phone and the phonebook saved in UIM. Phonebook 1. From the Phonebook menu (P57), “Add to phonebook” Add to phonebook Handset Name Reading Number1 Mail addr1 No group Select Save 2. Select an item to save (Handset) / (FOMA card (UIM)) Select a storage location of the Phonebook (H andset / UIM). (Name) Eter a name. Unless you enter a name, the Phonebook entry cannot be saved. (Reading) Eter reading of the name. Automatically inserted if you enter “Name”. 58 (Number 1 ~ 5) 1 Eter a phone number. If you press M[Icon] after entering, you can set a mark other than . (Mail addr 1 – 3) 1 3 Eter a mail address. If you press M[Icon] after entering, you can set a mark other than Group (Handset)/ (Group (FOMA card (UIM)) Select a group to save. (Image) 2 Select an image to be displayed when you receive a call and display Phonebook. – No image : No image is set. – Character: You can set the character. Select the part (Face, a Hir, Tops, Bottoms, Acc., Scenery) by pressing H, and then select the item by pressing J. After setting, press C. – Select picture : You can select from images saved in “My picture” of “Data box”. > P154 – Take picture: You can start a camera. o G to step 2 on page 102 of “Taking Still Images”. The size of image 80x96 cannot be rotated. (Set ringtone) 2 You can set a ring tone for when you receive a voice / video-phone call from registered caller. – Data box : You can select from melodies saved in “Melody” of “Data box”. >P164 – Terminal setting : o G to the settings of “Select ring tone”. >P68 Phonebook 3. After storing, I[Save] ] Enter a memory number (0-499) ] C Saving in UIM 1. From the Saving Phonebook Entries screen (P58), select the (Handset) field ]Select using J Phonebook (Set mail ringtone) 2 You can set a ring tone for when you receive mail from registered sender. – Data box: You can select from melodies saved in “Melody” of “Data box”. > P164 – Terminal setting: Follows the settings of “ringtone”. >P68 (URL) 2 You enter an URL. (Postal code) 2 You can enter a postal code. (Home addr) 2 You can enter a home address. (Company name) 2 You can enter a company name. (Job title) 2 You can enter a job title. (Company addr) 2 You can enter a company address. (Memo) 2 You can enter a memo. 2. Enter required items • See Step2 (P58) of “Adding to Phonebook” for details of the items. 3. I[Save] Information • For phone numbers of the Phonebook saved in Memory No 0 –9 (one saved in “Number1”), if you press 0~9 and then press A (T) from the Stand-by display, you can make a voice (video-phone) call. • 500 Phonebook entries can be saved in the FOMA phone and 50 Phonebook entries can be saved in the UIM. Note that the number of savable entries may be fewer depending on the saved contents. > P63 1 : Only one entry is saved if the storage location for the Phonebook is set to “FOMA card (UIM)”. 2 : Not displayed if the storage location for the Phonebook is set to “FOMA card (UIM)”. 3 : You register “Phone number ”X or “Phone number Xocomo.ne.jp” (X :XSecurity code) when you add the mail address including of security code of four digits. 59 Phonebook Searching for Phonebook Entries C] ]2 You can display the Phonebook in the FOMA phone handset / UIM specifying a search method. Phonebook 1. From the Phonebook menu (P57), “Search phonebook” • I[UIM]/n [ dset]: You can switch Phonebook Search screens between the FOMA phone handset and the UIM. 2. Select the following search method Show all data Press the buttons 1~0 corresponding to the 50 a Jpanese syllables (corresponding to Columns) for searching. If you press *, you can search for Other item. You can switch tab of the 50 syllabary by pressing J. Group search You can specify a group for searching. (G roup 1~ 30 (FOMA a Hndset)/ 1~ 10 (FOMA card)). After searching, you can switch groups by pressing J. Reading search You can search by entering some of the characters contained in the reading of the name. Memory No. search You can search by entering a memory number (0-499). You can switch tab of the syllabary by pressing J. 60 Phone No. search You can search by entering part of the phone number. Domain search You can search by specifying a domain. You can switch domains byJ. • To use specifying domain, see “Creating a domain list” (P64). : Not selectable on the Phonebook Search display of UIM. 3. The Phonebook List meeting the search method is displayed. ഼ Ȝ DoCoMo Ichiro DoCoMo Jiro DoCoMo Saburo DoCoMo Taro ȥ • The above is an example of the screen after carrying out “Show all data” search. • A/T : You can make a voice call or video-phone call to the selected phone number saved in phonebook. • I[Mail] : You can compose i-mode mail to selected mail address saved in phonebook. o G to step 3 on page 139 of "Composing i-mode mail ". : If the selected mail address is not registered in phonebook, you cannot use this function. Phonebook 4. Select the desired Phonebook ] C 002 DoCoMo Ichiro • A/T : You can make a voice call or video-phone call to the phone number saved in phonebook. • C[Call] : You can make a call to selected phone number. • C[Mail] : You can compose i-mode mail to selected mail address saved in phonebook. o G to step 3 on page 139 of “Composing i-mode mail”. • C[Connect] : You can connect the homepage of selected URL. Using the Submenus of the Phone List display Setting item/Setting at purchase > P241 1.From the Phonebook List screen (P60), M[Menu] ] Select from the following submenu items Search ctgry menu 1 – Handset 4/UIM 5 Group settings : After “G roup search”, you can set the each displayed group in the Next Page Phonebook Menu phonebook list screen. o G to step 2 on page 65 of “Using the Submenus of the rGoup Settings screen”. – Input char chg: You can switch entry modes for the Character n Etry column displayed at the top of the phonebook list screen after “Reading search”. – Return to input: You can return without “Input character change”. – Create domain list: You can create a new domain list from the Phone List display after “Domain search”. G to step 2 on page 64 of “Creating a Domain List”. Mail/URL 2 – Compose mail: The mail address saved in the selected Phonebook is entered into the destination. G to step 3 on page 139 of “Composing i-mode mail message”. – Compose SMS: The phone number saved in the selected Phonebook is entered into the destination. o to step 3 on page 141 of “Creating SMS”. – Connect to URL: Connected to the web page with the URL saved in the selected Phonebook. Add new You can create a new phonebook. o Gto step 2 on page 58 of “Adding to Phonebook” for items to be saved. Edit You can edit the selected Phonebook. o Gto step 2 on Page 58 of “Adding to Phonebook” for items to be saved. Send Ir data 3 You can send the Phonebook selected through infrared ray communication. For Infrared exchange, see "Using the Infrared xEchange" (P17 4). 61 Phonebook Phonebook Copy – Copy to UIM 4: You can copy the Phonebook selected to the UIM. – Select copy to UIM 4: You can copy multiple Phonebooks selected to the UIM. If you press M, you can select all data. After selecting, press I[Done]. – Copy to handset 5: You can copy the Phonebook selected to the handset of the FOMA phone. – Select copy to handset 5: You can copy multiple Phonebooks selected to the handset of the FOMA phone. If you press M, you can select all data. After selecting, press I[Done]. Search by You can select another search method to display a phonebook. For the searching method, o G to step 2 on page 60 of “Searching for Phonebook n Etries”. Delete – Delete: You can delete the Phonebook selected. – Delete selected: You can delete the multiple Phonebooks selected. If you press M, you can select all data. After selecting, press I[Done]. – Delete all: You can delete Phonebook (H andset/UIM) to display. After deleting all data, the display goes back to Stand-by mode. Display switch – Display image 3: If an image is registered in phonebook list, you can set whether to display the image or not. > P64 62 – Display data: You can switch Phonebooks between the handset of the FOMA phone and the UIM to display. >P63 1: You can user phonebook list by rGoup search except for “No group”, “Reading search”, “Phone No. search” and “Domain search”. You may not be able to select it depending on the search method or storage status of the Phonebook selected. 2: You cannot select it if no phone number/mail address/URL is stored in the Phonebook selected. 3: Not selected in Phonebook for UIM. 4: Displayed on the Phonebook of the handset. 5: Displayed on the Phonebook of the UIM. Information • During a call, you cannot activate ‘Copy’ and ‘Send Ir data’ menu. Using the Submenus of the Detailed Phonebook Display 1. From the Detailed Phonebook screen (P61), M[Menu] ] Select from the following submenu items Mail/URL 1 – Compose mail: The mail address saved in the phonebook displayed is entered into the Address. G to step 3 (P139) of “Composing i-mode mail message”. Phonebook – Compose SMS: The phone number saved in the phonebook displayed is entered into the Address. o to step 3 (P141) of “Composing SMS”. – Connect to URL: Connected to the homepage of the URL saved in the Phonebook displayed. 1: You cannot select it if no phone number/mail address/URL is stored in the Phonebook selected. 2: Not selected in Phonebook for UIM. 3: Displayed during displaying the Phonebook of the handset of the FOMA phone. 4: Displayed during displaying the Phonebook of the UIM. C] ]3 You can check the number of phonebook entries saved in the handset of the FOMA phone and in the UIM as well as the number of phonebook entries available. Phonebook Edit You can edit the phonebook. o G to step 2 on page 58 of “Adding to Phonebook”. Send Ir data 2 You can send the phonebook entry on display by infrared. For details, please refer to “Using the Infrared xEchange Function” (P17 4). Copy to UIM You can copy the phonebook entry to the FOMA card (UIM). Copy to handet 4 You can copy the phonebook entry to the FOMA handset. Delete You can delete the phonebook entry. Checking the Number of Saved Phonebook Entries 1. From the Phonebook menu (P57), “No. of phonebook” Information • Actual savable number of phonebook may be fewer depending on the contents saved in Phonebook of the UIM. Setting Phonebook Setting Display Data C] ]41 You can set whether to display the phonebook of the handset of the FOMA phone or the phonebook of the UIM when displaying a phonebook. Setting item/Setting at purchase > P231 1. From the Phonebook menu (P57), “Phonebook settings” ] “Display data” ]“Handset only”/“UIM only” Information • During a call, you cannot activate “Copy” and “Send Ir data” menu. 63 Phonebook Information Creating a Domain List C] ]42 You can store domains to be used when doing “Domain Search” (P60). Phonebook Setting item/Setting at purchase > P231 • I[Disp.] : You can view all domain registered in a list. : You cannot use this menu when you select no input screen. • M[Delete] : You can delete the domain saved. : You cannot use this menu when you select “@ docomo.ne.jp” or no input screen. 2. Select the domain list field ]C]Enter a domain ]C Selecting a Search Method 43 You can set the search method for when you pressUon the Stand-by display and bring up the phonebook search display. Setting item/Setting at purchase > P231 1. From the Phonebook menu (P57), “Phonebook settings” ] “Search by” ] Select a search method • o G to step 2 on page 60 of “Searching the Phonebook n Etries” for the search method. 64 Displaying Images C] 1. From the Phonebook menu (P57), “Phonebook settings” ] “Create domain list” • If the “Display data” (See left) is set to “UIM only”, you cannot select “Memory No. search”. ]44 You can set whether to display the image set when selecting a phonebook with “ (image setting)” set (P58) on the phonebook list screen. Setting item/Setting at purchase > P231 1. From the Phonebook menu (P57), “Phonebook settings” ] “Display image” ] “ON”/“OFF” Setting Groups C] ]5 You can save the group name for rGoup of the phonebook. You can also set a ring tone for each group. 1. From the Phonebook menu (P57), “Group settings” • rGoup settings display appears. • I[UIM]/a [ ndset]: You can switch the rGoup settings displays between the FOMA phone (handset) and the UIM. Phonebook 2. Select the group to set ] C ] Select the following item to register ] After setting, press I[Finish] Mail ringtone You can set a ring tone for when mail comes in. – Data box: You can select from the melodies saved in “Melody” of “Data box”. >P164 – Terminal setting: Follows the settings of “Select ringtone”. >P68 : Not displayed on the G roup setting display of the UIM. 1. From the Group Settings screen (P64), M [Menu] ]Select from the following submenu items Reset 1 You can reset the settings of the group selected. Move 2 You can change the order of the group selected. Edit You can edit the group selected. o G to step 2 (See left) of “Setting rGoups”. Reset all 3 You can reset the settings and order of all groups. Phonebook Group name You can save the name of the group. Ringtone You can set a ring tone for when a call comes in. – Data box: You can select from the melodies stored in “Melodies” of “ Data box”. >P164 – Terminal setting: Follows the settings of “ringtone”. >P68 Using the Submenus of the rGoup Settings Screen 1: You cannot use this menu when the selected group is not edited. 2: You cannot use this menu in FOMA card group setting screen. 3: You cannot use this menu when not moving or editing a group. Displaying Own Number Information C] • You cannot set to “No group”. ]6 You can display your phone number recorded in the UIM. 1. From the Phonebook menu (P57), “Own number” • The Own number screen appears. Information • You can also check your own number by pressingC0 from the Stand-by display. Next Page 65 Phonebook Displaying Details of Own Number Phonebook 1. From the Own number screen, C[Detail] ] Enter your terminal security code ] C • The Detail screen appears. • A/T: You can make a voice/ video-phone call by the number registered in. (not own number) • C[Call] : You can make a voice call by the selected phone number. : You cannot use your own number. • C[Mail]: You can compose i-mode mail to selected mail address. • C[Connect]: You can connect the homepage of selected URL. Using the Submenu of the Detail display 1. From the Detail display (See above), M[Menu] ] Select from the following submenu items Mail/URL 1 – Compose mail: The mail address registered in my number will be entered to destination. G o to step 3 on page 139 of “Composing Mail”. – Compose SMS 2: The phone number registered in my number will be entered to destination. G o to step 3 on page 141 of “Compose SMS”. – Connect to URL: You can connect the homepage of URL registered in my number. 66 Edit You can store your own information. For adding method, o G to step 2 on page 58 of “Adding to Phonebook”. o Hwever, your number registered in “ ”cannot be edited. Send Ir data 3 You can send your own number through infrared ray transmission. For details related to infrared exchange, go to “Using the Infrared xEchange Function” on P17 4. Reset 4 You can reset the edited own number information to its default. 1: You cannot use this menu if the phone number/ mail/ URL are not registered. 2: You cannot use the menu despite you operate the number registered in own number. 3: You cannot use this menu during a call. 4: You cannot use this menu when the own number information is not edited. Sound/ Display Sound Ring volume Effect tone volume Select ringtone Select effect tone Vibration settings Manner settings Mail ring duration Select Display Main display Sub display Font Menu style Backlight Color scheme Select To display the Sound menu Adjusting the Ring Volume ....................68 Adjusting the Effect Tone Volume .........68 Setting a Ring Tone................................68 Setting an Effect Tone ...........................69 On the Stand-by display, or “Sound” C[Menu] ] To display the Display menu On the Standby display, or “Display” C[Menu] ] Setting a Vibrator ...................................70 Activating the Manner Mode .................70 Setting Ringing Operations for Incoming Mail ........................................72 Setting Ringing Time..............................72 Setting Main Screen...............................72 Setting Sub Display................................74 Setting Fonts of Dial Characters ...........75 Setting Menu Style .................................75 Setting Backlight ....................................75 Setting color Scheme.............................76 67 Sound/Display Adjusting the Ring Volume C] Adjusting the Effect Tone Volume C] ]1 ]2 Sound/Display Setting items/Setting at purchase > P234 Setting items/Setting at purchase > P234 1. From the Sound menu (P67), “Ring volume” ] Select from the following adjustment items ] After setting,I [Done] 1. From the Sound menu (P67), “Effect tone volume” ] Select from the following adjustment items ] After setting,I [Done] Voice call You can adjust the ring tone volume for voice calls. Video-phone You can adjust the ring tone volume for video-phone calls. Mail tone You can adjust the ring tone volume for mail. MessageR tone You can adjust the ring tone volume for MessageR. MessageF tone You can adjust the ring tone volume for MessageF. SMS tone You can adjust the ring tone volume for SMS. Key tone You can adjust the key pad sound volume. Power ON/OFF You can adjust the tone volume for when turning the FOMA phone on or off. Flip tone You can adjust the tone volume for when opening or closing the FOMA phone. Feedback tone You can adjust the tone volume for when a popup is displayed. Setting a Ring Tone Information • h Wen you receive mail, mssage R/F, or SMS on opening the flip, the alarm sound will be fixed to level 1 regardless of each setting “Ring volume”. H owever, if you set level 0 of ring tone, the alarm does not sound. C] ]3 You can set the ring tone for voice call, video-phone call or mail. You cannot set some melodies for ring tones such MP4 file. But, you can set the SMF or MFi file as a ring tone. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 68 Y Sound/Display • You cannot set the melody saved in miniSD memory card. • For the melody registered at purchase, see “List of melody” (P251). Setting items/Setting at purchase > P234 Voice call You can select a ring tone for voice calls. Video-phone You can select a ring tone for video-phone calls. Mail tone You can select a ring tone for mail. MessageR tone You can select a ring tone for messageR. MessageF tone You can select a ring tone for messageF. SMS tone You can select a ring tone for SMS. Information • If you have set a ring tone depending on the voice call/ video phone call/ Mail, the ring tone is preferred. The priority order is as follows: 1 Ringtone set in the FOMA phone’s phonebook > Set the phonebook (P58) Setting an Effect Tone C] ]4 Setting items/Setting at purchase > P234, P235 1. From the Sound menu (P67), “Select effect tone” ] Select from the following adjustment items ] After setting, I[Done] Key tone You can set whether to emit an effect tone for when you touch the buttons. Power ON/OFF You can set whether to emit an effect tone for when you switch ON or OFF the FOMA phone. Flip tone You can set whether to emit an effect tone for when you open or close the FOMA phone. Feedback tone You can set whether to emit an effect tone for when a popup is displayed. 69 Sound/Display 1. From the Sound menu (P67), “Select ringtone” ] Select from the following adjustment items ] After setting, I[Done] • Select from the melodies stored in “Melody” in “Data box” respectively. >P164 2 Ringtone set for a group of the FOMA phone’s phonebook > Set group (P64) 3 Ringtone volume/V ideo call ring tone/Mail, Messsage ring tone > Select the ring tone (P68) • The sound setting of voice mail will be applied as the setting value of SMS. Sound/Display Setting a Vibrator C] ]5 Setting items/Setting at purchase > P235 Sound/Display 1. From the Sound menu (P67), Vibration settings ] Select from the following setting items ] After setting, I[Done] Incoming call You can select a vibration pattern for when a voice call or a video-phone call comes in. – Pattern1 (Vibration only): This activates the vibration to pattern 1. Regardless of ring tone, the tone for incoming call does not sound. – Pattern2 (Vibration only): This activates the vibration to pattern 2. Regardless of ring tone, the tone for incoming call does not sound. – melody + vibration: The vibration and the melody for incoming call are activated at the same time. – OFF: The vibration is not activated in FOMA phone. Message You can set a vibration pattern for when mail, messageR/F or SMS comes in. – Pattern 1(Vibration only): This activates the vibration to pattern 1. Regardless of ring tone, the tone for incoming call does not sound. 70 – Pattern 2(Vibration only): This activates the vibration to pattern 2. Regardless of ringtone, the tone for incoming call does not sound. – melody + vibration: The vibration and the melody for incoming call are activated at the same time. – OFF: The vibration is not activated in FOMA phone. Activating the Manner Mode You can set whether to mute the ring tone, key pad sound and any other sound from the speaker to avoid annoying people around you. If the manner mode is activated, an incoming call or alarm, etc. is notified with vibrator. • You can change the activation on setting manner mode to “Original manner mode”. > P7 1. From the Stand-by display, press and hold # for at least two seconds • The handset of the FOMA phone vibrates displaying (blue/in the Original manner mode) or (pink/in the Manner mode). • You can cancel it by pressing# for at least two seconds with the Manner mode activated. Sound/Display Changing Manner Modes C] ]6 You can change operations in the Manner mode. Setting at purchase > P235 Manner mode You can set the Manner mode. Original manner mode You can customize operations in the Manner mode. After setting, press I D [ one]. – Incoming call sound: You can set whether to make the ring tone sound when a voice call or video-phone call comes in. – Incoming call vib.: You can set whether to vibrate the phone when a voice call or video-phone call comes in. – Message sound: You can set whether to make the ring tone sound when mail, messageR/F or SMS comes in. – Message vibration: You can set whether to vibrate the phone when mail, messageR/F or SMS comes in. Information • The following sounds are emitted even when the manner mode is activated. –The shutter tone on shooting still and moving image. > P104 –The alert tone for disconnecting a call. > P46, P48 –The alert tone to reconnect > P82 –The alert tone for the quality of calling > P83 • If you try to play the melody, moving image or i-motion on manner mode, the confirmation screen appears and you can select whether to play with sounds. 71 Sound/Display 1. From the Sound menu (P67), “Manner settings” ] Select from the following setting items – Key tone: You can set whether to make the key operation sound when you do key operations. – Flip tone: You can set whether to make an effect tone sound when you open or close the FOMA phone. – Low battery tone: You can set whether to make a battery alarm tone sound when the battery is flat. Sound/Display Setting Ringing Operations for Incoming Mail C] Setting Ringing Time ]7 You can set whether to make the ring tone sound when mail or SMS comes in. You can also set ringing duration and cycle of rings. Sound/Display Setting items/Setting at purchase > P235 1. From the Sound menu (P67), “Mail ring duration” ] Select from the following setting items ] After setting, I[Done] Mail ring ON/OFF You can set whether to make the ring tone sound when mail comes in. If you select “ON”, you can set the ringing duration or cycle of ringing. Mail ring duration You can set ringing time and number of rings for the ringing tone. – Time: After select Sec. section by pressing D, you can enter duration of ringing. – Cycle: After select Cycle section by pressing D, you can enter the number of cycle. C] ]8 You can specify the mute time in seconds before ringing starts when a voice call or video-phone call which is not registered in phonebook comes in. This function is effective as a countermeasure for nuisance calls such as one ring phone scam. Setting items/Setting at purchase > P235 1. From the Sound menu (P67), Select “Set mute seconds” ] Enter ring time. ] I [Done] Information • If the voice call or video-phone call which are not registered in phonebook disconnects within the setting ringing time, they are not recorded in received call list. Setting Main Screen You can set the display for stand-by display or Incoming/outgoing screen as Main display. You can set the maximum of the image size of 1280 x 1024 and the file size of 500 B K on the Stand-by display. Depending on the image, some cannot be set properly. • You cannot set the image in miniSD memory card. •h Wen the image saved in stand-by mode, making and receiving a call at purchase, please refer to “Pre-installed data” (P248) * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 72 Y Sound/Display Setting the Stand-by Display C] ] 11 You can set wallpapers and clock displays for the Standby display. Setting items/Setting at purchase > P235, P236 Clock type You can set the display format of the clock in Standby mode. If you set it to “Dual clock”, you can view the time of two cities at the same time. Wallpaper 1 You can set wallpaper to be displayed on the Standby display. • Select an image saved on “My picture” of “Data box”. > P154 Clock font color 2 You can set the clock font color of the clock display. Clock1 3 The city name (Tokyo) is displayed. This is a city name of clock displayed in Stand-by screen. You cannot change the city name in this mode. Clock2 3 If you set “Dual clock”, this menu is displayed. You can set the clock of another city. Information • If you press M iV [ew], you can confirm the display set. • If you want to change from “Tokyo” to the other city, go to “Using o Wrld time” (P17 8). Setting the Display for Incoming Calls C] ] 12 You can set the image displayed when you receive an incoming call. Setting items/Setting at purchase > P236 1. From the Display Menu (P67), “Main display” ] “Incoming call” • Select from the images saved on “My picture” of “Data box”. > P154 Setting Display for Outgoing Calls C] ] 13 You can set the image displayed when you make a call. Setting items/Setting at purchase > P236 1. From the Display Menu ] “Main display” ] “Outgoing call” (P67) 73 Sound/Display 1. From the Display Menu (P67), “Main display” ] “Stand-by display” ] Select from the following setting items ] After setting, I [Done] 1: If “Clock type” is set to “Theme1”, “Theme2”, “Theme 3”. “Theme 4”, this menu is not displayed. 2: If “Clock type” is set to “Small digital”, this menu is displayed. 3: If “Clock type” is set to “Dual clock”, this menu is displayed. Sound/Display • Select from the images saved on “My picture” of “Data box”. > P154 Setting Sub Display Sound/Display You can set images of the stand-by display for Sub display and displays for incoming and outgoing calls. You can set the maximum of the image size of 1280 x 1024 and the file size of 500 B K on the stand-by display. Depending on the image, some cannot be set properly. • You can set the image in miniSD memory card as a wallpaper when making/ receiving a call. •h Wen the image saved in stand-by mode, making and receiving a call at purchase, see “Pre-installed data at purchase” (P248) Wallpaper You can set the wallpaper to be displayed on the Stand-by display. • Select from the images saved on “My picture” of “Data box”. > P154 Clock font color You can set the font color of the clock display. : If “Clock type” is set to “Small digital”, this menu is displayed. Information • You can view the screen after setting by pressing M iV [ew]. Setting Display for Incoming Calls C] ] 22 You can set the image to be displayed when you receive a call. Setting Stand-by Display C] ] 21 You can set wallpapers and clock displays on the Standby display. Setting items/Setting at purchase > P236 1. From the Display Menu (P67), “Sub display” ] “Stand-by display” ] Select from the following setting items ] After setting, I[Done] Setting items/Setting at purchase > P236 1. From Display Menu (P67), “Sub display” ] “Incoming call” • Select from the images saved on “My picture” of “Data box”. > P154 Clock type You can set the display format for the clock. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 74 Y Sound/Display Setting Menu Style Setting the Display for Outgoing Calls C] ] 23 C] ]4 You can set the style of the Menu Style that appears when pressing C M [ enu] on the Stand-by display. Setting items/Setting at purchase > P236 Setting items/Setting at purchase > P236 1. From Display Menu, “Sub display” ] “Outgoing call” (P67) • Select from the images saved on “My picture” of “Data box”. > P154 1. From the Display Menu (P67), “Menu style” ] “Grid”/“List” ] I [Done] Setting Fonts of Dial Characters C] ]3 You can set the sizes and colors of the dial fonts displayed when you make a call, etc. Setting items/Setting at purchase > P236 1. From the Display Menu (P67), “Font” ] Select from the following setting items ] After setting, I[Done]. Dial font size Select a size of dial fonts. Dial font color Select a color of dial fonts. Setting Backlight C] ]5 You can set the lighting duration of the Main screen, Sub display or buttons. Setting items/Setting at purchase > P236, P237 1. From the Display Menu (P67), “Backlight” ] Select from the following setting items =>After setting, I[Done]. Main display Set the lighting duration of the Main screen. Sub display Set the lighting duration of the Sub display. Keypad Set the lighting duration of the buttons. 75 Sound/Display You can change the image to be displayed when you make a call. Sound/Display Setting color Scheme C] ]6 You can set the color scheme of the Main screen. Setting items/Setting at purchase > P237 Sound/Display 1. From the Display Menu (P67), “Color scheme” ] Select the color scheme you want to set ] I [Done]. Information • If you press C iV [ew], you can view the screen after setting. 76 Settings Settings Select Call/Answer ............................................78 Call Feature ............................................82 Video Phone ...........................................84 Settings Call/ Answer Call feature Video-phone Date & Time Network Host selection Security Select To display the Settings menu On the Stand-by display, or “Settings” C[Menu] ] Date & Time ............................................86 Network (for overseas use) ....................87 Changing a Host from i-mode ...............89 Security...................................................90 Language ................................................91 Others Settings.......................................92 77 Settings • A/T: You can make a call to the other party of the record being recorded. • I[Delete]: You can delete the record being selected. Call/Answer Checking Call iH story 2. Select a call record ]C Displaying Received Call Records C] ]111 Recv. Calls (1/26) DoCoMo Ichiro You can view the record of received call. Settings 1. From the Settings menu (P77), “Call/Answer” ] “Call history” ] “Received calls” Recv. Calls (1/26) DoCoMo Taro DoCoMo Taro DoCoMo Ichiro DoCoMo iJro DoCoMo Saburo Menu View Delete [Date] [Time] [duration] Menu Delete This list will be displayed when the phone number in a list are registered in phonebook list. You can view the list by pressing J. Icon • A/T: You can make a call to the other party in a list. • I[Delete]: You can delete the list of call record. • J: You can view the call record. Using the Submenu of the Received Calls screen/ Description Received voice calls Received video-phone calls Details screen 1. From the Received Calls screen (See left)/Detail screen (See above), M[Menu] ] Select from the following submenu items Rejected calls Missed calls (V oice calls) Missed calls (V ideo-phone calls) 78 View 1 You can view details of the call record selected. Add to phonebook 2 You can register a new phonebook. Settings 1: Not selected in sub-menu of detail screen. 2: Not selected if information on the caller of the call record selected is stored in the phonebook. 3: Not selected if information on the caller of the call record selected is not stored in the phonebook. 4: Selected in sub-menu of detail screen. Displaying Redial Items (Dialed Call Records) ]112 C] You can view dialed call records. 1. From the Settings menu (P77), “Call/Answer” ] “Call history” ] “Redial” • The Redial display appears. Mark 2. Select Redial ] C • The Details display appears. Information • See “Using the Submenu of Received Calls Screen”/“Using the Submenu of the Detailed Screen” (P7 8) for the display operation method and the submenus available from the Redial display/Detail screen. Displaying All Call Records C] ]113 Received and dialed call records are displayed together. 1. From the Settings menu (P77), “Call/Answer” ] “Call history” ] “All calls” • The All calls screen appears. 2. Select a history ] C • The Detail screen appears. Information • See “Using the Submenu of Received Call Records Screen” / “Using the Submenu of the Detailed Screen” (P7 8) for the display operation method and the submenus available from the All Calls screen / Detail screen. Description Dialed voice calls Dialed video-phone calls 79 Settings Send mail 3 The mail address stored in the phonebook is entered into the Address. o G to step 3 (P139) of “Composing imode mail message”. Delete You can delete the call record selected on display. Delete all 1 You can delete all the call records. Go to list 4 You can return to the screen of received call list. Settings Displaying Call Time C] ]12 You can confirm call duration for each call type. You can confirm the following items: • The displayed call duration is a standard. The real of call duration can be different. Settings 1. From the Settings menu (P77), “Call/Answer” ] “Call duration” • Call duration display appears. Last call You can confirm the last call duration. Received calls You can confirm the received call duration. Redial calls You can confirm the dialed call duration. All calls You can confirm the total call duration. • To clear all the call durations ] M [Menu] ] “Reset all” Setting a Erphone/Microphone Auto Answer C] ]13 You can set how to answer an incoming call with the Flatplug a Erphone/Microphone Set with Switch (option) connected. Setting item/Setting at purchase > P237 1. From the Settings menu (P77), “Call/Answer” ] “Auto answer” ] Select from the following setting items > After setting, I [Done] Auto answering You can set the earphone/microphone auto answer to ON/OFF. Delayed time (0–120 SEC) You can set the time between receiving call and answering a call automatically. Information • If the display of call time is over “9999999:59:59”, the setting will be back to “00:00:00”. Resetting call duration 1. Select a call duration you want to clear on the Call duration screen (See above) ] I [Reset] ]Enter your terminal security code ] C ] “Yes” 80 Information • If you use the Flat-plug E arphone/Microphone Set with Switch (option), you can answer a voice call or video-phone call by pressing the switch of the earphone only. Settings Setting to Reject/Accept Incoming Calls C] ]14 You can set whether to reject incoming calls. Setting item/Setting at purchase > P237 2. Select from the following setting items Accept You can set whether to accept all incoming calls. Reject on list You can reject the incoming call from the specific other party. You can set the party's phone number to reject a call by pressing I S [ etup] (See below). Reject all calls – Silent : You can disable the ringing tone for all incoming calls. – Disconnect call : You can reject all incoming calls. Information • h Wen rejecting a call by “Reject on list” or “Reject all calls”, the record will be remained. 1. From the Reject/Accept call display (See left), Select “Reject on list” ] I [Setup] • The icons of call reject on a list will be displayed. Mark Description The type of reject call is set “Silent”. The type of reject call is set “Disconnect call”. • MM [ enu]: You can edit/delete the list set. 2. I[Add] ] Select from the following setting items ] After setting, I[Done] Reject types – Silent : Disables the ring tone when receiving the call from the other party set to “Reject number”. – Disconnect call : Rejects incoming calls when receiving the call from the other party set to “Reject number”. Reject number Eter the phone number of a caller you want to reject. You can select a phone number from the phonebook by pressing C S [ earch]. If you press , you can select the phone number from the phonebook. : If you use M[Menu] > d Eit from the reject on list. you cannot use the function. Next Page 81 Settings 1. From the Settings menu (P77), “Call/Answer” ] “Reject/Accept call” ] Enter your terminal security code ] C • The Reject/Accept call display appears. Setting Reject call List Settings Information Setting Memory Reject Call C] ]15 You can set whether to reject calls from callers whose phone numbers are not registered in the phonebook or not being informed the Caller ID. Setting item/Setting at purchase > P237 Settings 1. From the Settings menu (P77), “Call/Answer” ] “Memory reject call” ] “ON”/“OFF” Setting an Answer Mode C] ]16 You can set whether to answer a voice call by pressing a button other thanA Setting item/Setting at purchase > P237 1. From the Settings menu (P77), “Call/Answer” ] ”Answer mode” ] Select from the following setting items Press send key You can answer a call by pressing A only. Open flip You can answer a call by opening the FOMA phone. If the FOMA phone is open already, you can answer a call by A. Press any key You can answer a call by pressing any key except for M, I, FE, G. 82 • This setting is not available for video phone call. Call Feature Setting the Reconnect Control C] ]21 You can set whether to make an alarm sound to inform you when you are reconnected immediately after disconnected owing to bad radio wave conditions. Setting item/Setting at purchase > P237 1. From the Settings menu (P77), “Call feature” ] ”Reconnect alarm” ] Select from the following setting items High alarm Set high alarm sounds. Low alarm Set Low alarm sounds. No alarm No sound. Information • The time to reconnect the network can be different depending on the status of phone or radio. (the maximum 10 seconds) • The duration to reconnect the network can be chargeable. • Depending on the status of phone or radio, the alarm may not sound, and then disconnect it. Settings Information Setting u Qality Alarm C] ]22 You can set whether to make an alarm sound to inform you when a call is liable to be disconnected midway because of bad radio wave conditions. Setting item/Setting at purchase > P238 High alarm Set high alarm sounds. Low alarm Set low alarm sounds. No alarm No sound. Setting Prefix Dial C] ]24 You can store prefix numbers such as international access code or “# 31#/ 31# ” and add it to the beginning of the phone number to dial. Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Call feature” ] “Prefix dial” • The Prefix Dial screen appears. 2. Select a PREFIX field to enter ] Enter a number ] I[Done] Setting International Dial Setting Minute Reminder C] ]23 You can check the call duration by beep sound every minute during a voice call. (Not support this function for iVdeo-phone call) Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Call feature” ] “Minute reminder” ] “ON”/“OFF” Setting Auto assist C] ]251 You can set whether to automatically replace “+ ”´ at the beginning of a phone number with an international access code such as “009130010” for making an international call. Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Call feature” ] “International dial” ] “Auto assist setting” ] “Auto”/“OFF” Next Page 83 Settings 1. From the Settings menu (P77), “Call feature” ] “Quality alarm” ] Select from the following setting items • This setting is not available with a video-phone call. Settings Setting IDD prefix C] ]252 You can set the international access code to be added to the beginning of a phone number for making an international call. Setting item/Setting at purchase > P238 Settings 1. From the Settings menu (P77), “Call feature” ] “International dial” ] “IDD prefix setting” ] Select from the following setting items ] After setting, I [Done] IDD prefix name Eter the name of an international call service. IDD prefix code Eter an international access code. C] ]26 You can set how the FOMA phone works when it is folded. Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Call feature” ] “Close setting” ] Select from the following setting items 84 Information • During video-phone call, if you close the flip, the call will be ended regardless of this setting. Video-Phone You can change settings for the video-phone operation and display. Changing the iVdeo-Phone Settings C] ]31 You can set how the FOMA phone works and screens when making a video-phone call. Setting Close setting End the call The call is disconnected. Continue(Mute) The microphone is mute during Continue (Mute) call. This function is available for only voice call. Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Video-phone” ] “Video-phone settings” ] Select from the following setting items ] After setting, I[Done] VoiceCall AutoSwitch Sets (ON/ OFF) whether to redial by automatically switching to a voice call if the other party is unable to answer a video-phone call. Settings Selecting a iVdeo-phone Image Changing Substitutive images C] ]321 You can set a substitute image to send in place of your own image during a video-phone call. Setting item/Setting at purchase > P238 1. From the Settings menu (P77), “Video-phone” ] “Image settings” ] “Substitutive image” ] Select from the following setting items ] After setting, I[Done] Image – Default Image : The image by default. – Selected image : You can select an image other than the default image from the “Image list”. Image list You can select an image for when “Image” is set to “Selected image”. Select from images stored in “My picture” of “Data box”. > P154 Changing Response Hold Image C] ]322 You can set an image to display when you put the call on hold during ringing of a video-phone call. Setting item/Setting at purchase > P238 Next Page 85 Settings Display setting You can set how to display the Talking screen. – Both : Your image and the other party’s image are displayed. – Other : Only the other party’s image is displayed. – Me : Only your image is displayed. Sub screen You can set an image to be displayed on the sub screen when “Display setting for video phone call” is set to “Both”. – Me : Your image is displayed. – Other : The other party’s image is displayed. Send camera image You can set whether to send your image to the other party. If set to “OFF”, a substitute image is sent to the other party. Sending img. quality – Prefer image quality : Sends images laying stress on image quality. Prefer image quality is effective if there is little motion. – Normal : Sends images in standard quality and motion speed. – Prefer motion quality : Sends images laying stress on motion speed. Prefer motion speed is effective for moving images. Display light – Always on : e Keps the display lit during a call. – Terminal setting : Follows the settings of the “Backlight” of the “Main display”. >P7 Settings 1. From the Settings menu (P77), “Video-phone” ] ”Image settings” ] ”Response hold image” • See “Changing Substitutive image” (P85) for the subsequent operations. Changing On-hold Images C] ]323 Settings You can set an image to display when you put the call on hold during ringing of a video-phone call. Setting item/Setting at purchase > P238,P239 1. From the Settings menu (P77), “Video phone” ] “Image settings” ] “On-hold image” • See “Changing Substitutive image” (P85) for the subsequent operations. 1. From the Settings menu (P77), Select “Date & Time” ] “Set time” ] Select from the following setting items ] After setting, I[Done] Set time Press J to select an input item (hour, minute, second, am/pm ). Use the numeric keys to enter numbers. Press C to switch between am/pm . Time format You can set whether to display time in the 12-hour format or in the 24-hour format. Hour indication You can set whether the alarm will sound or not after setting (00 min). You can select the ring tone as an alarm. If you don't want this indication, set “OFF”. : Displayed if “Time format” is set to “12-hour”. Date & Time Setting Date C] Setting Time C] ]41 You can set the time of city which is already set “H ome” (the city at purchase: Tokyo) by “W orld time”. (P17 8) Setting item/Setting at purchase > P239 86 You can set the date. Setting item/Setting at purchase > P239 ]42 Settings 1. From the Settings menu (P77) ] Select “Date & Time” ] “Set date” ] Select from the following setting items ] After setting, I[Done] Network (for overseas use) Selecting the Network Connection Mode Set date Press J to select an input item (year, month, date). Use the numeric keys to enter numbers. Date format You can change display formats of the date. (DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD) You can select a network setting method in case destination networks (Communication carriers) change for overseas use, etc. : YYYY stands for Year, MM stands for Month, and DD stands for Day. 1. From the Settings menu (P77), “Network” ] “Network selection” ] Select from the following setting items C] ]43 You can set daylight saving time. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Date & Time” ] “Daylight saving” ] “ON”/“OFF” ]51 Setting item/Setting at purchase > P239 Settings Setting Daylight Saving C] Auto Automatically searches for the network for setting. Manual The network search display appears, allowing you to select a network from the list displayed after search. Information Information • The country applying to the Summer time by using “W orld time” (P17 8) is set as a home. After setting, it is displayed in Summer time. • It may take a few minutes to find the network. • If you set “Auto”, you can search the network automatically in the situation as follow. –h Wen you switch on –Out of service area • If you stop searching the network manually, the setting will be changed to “Auto”. 87 Settings Setting the Network Mode Registering a Network of Preferred list C] ]52 You can set a type of network to search for when networks are searched according to “Network selection”. Setting item/Setting at purchase > P239 Settings 1. From the Settings menu (P77), “Network” ] “Network mode” ] Select from the following setting items Auto Searches all the networks connectable. WCDMA only Searches only networks supporting 3G GSM only Searches only networks supporting S GM/G PRS. Information • You cannot exchange the data through packet service under GM network. 88 C] ]53 Adding Networks If the network is searching automatically, you can add a preferable network (communication carrier) to be connected to. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Network” ] “Preferred lists” 2. M[Menu] ] Select from the following setting items • I[Delete]: You can delete the network selected. Search network You can select from the network list stored in the FOMA phone for adding. Enter new network You can enter the country code (MCC) and the network code (MNC) for adding. After setting, press I[Done]. Delete You can delete the selected network. Move up You can move the selected network upward. The network which is moved upward is preferred. Settings Move down You can move the selected network downward. The network placed downward is preferred. Changing a Host from i-mode Setting / Changing the o Hst : If you register multiple networks, you can use this menu. Information C] ]6 Normally, you do not need to change the setting. Setting item/Setting at purchase > P239 Displaying the Network Name C] You can set a host to use services of various providers other than i-mode. If the host is changed, i-mode becomes unavailable. Settings • If the network is not registered, M [ enu], D [ elete] of soft key area on list to register will not be displayed. To add new network, press I [Add]. • The registered data is saved in FOMA card. ]54 You can set whether to display the name of the network currently set on the Stand-by display. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Network” ] “Network name display” ] “Display on”/“Display off” 1. From the Settings menu (P77), “Host selection” ] From the Host selection screen, I [Add] ] Enter your terminal security code ]C ]Set the following items ]After setting, I [Done] • The host set is displayed on the o Hst selection screen with attached to it. Host name Eter the name displayed on the o Hst selection screen. Host address Eter the address of the host. Access point Eter the Access point (URL, etc.). 89 Settings Information • To switch the host back to “i-Mode” or to switch to another host, select “i-Mode”/other hosts and press C on the o Hst selection screen. • If you press M M [ enu] on the o Hst selection screen, you can edit / delete / display the host set. Note that you cannot edit / delete pre-installed “i-Mode”. • In Access point menu, you should enter IP address in PDP type. Releasing All Lock Settings 1. Press either one of 1~0 ] Enter your terminal security code ] C Security E ergency]: You can call • On the locked display, I[m emergency information (110/118/119). Setting All Lock C] ]71 You can set whether to lock requiring to enter the terminal security code to operate function. During All Lock, “All lock” is displayed on the Stand-by display. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Security” ] “All lock” ] Select from the following setting items Power on You can set whether to lock the FOMA phone when you turn of the power. You need to enter your terminal security code to set it. 90 Immediate Sets All lock immediately. You need to enter your terminal security code to set it. none You can release All lock. You need to enter your terminal security code to release it. Setting PIN Code Request C] ]72 You can set to enter PIN1 code when you turn on the power to the FOMA phone. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Security” ] “PIN code request” ] “ON”/“OFF” ] Enter PIN1 code ] Settings Changing Your Password Changing the PIN1 code / PIN2 code ]731 / C] ]732 C] Information • If you enter a wrong PIN code over three times, the PIN code will be locked automatically. If you unlock the PIN code, see “Preventing the Phone from Activating the Operation of Function” (P97 ). Changing Your Terminal Security Code ]733 C] 1. From the Settings menu (P77), “Security” ] “Change password” ] “PIN1 code”/“PIN2 code” You can change your terminal security code. Change PIN1 code Current PIN1 code. R:3 The remaining time to enter PIN is available New PIN1 code Verify PIN1 code Settings You can change the PIN1 code / PIN2 code. To change the PIN1 code, you should set “PIN code request” to “ON”. The default code is “0000”. Setting item/Setting at purchase > P239 1. From the Settings menu (P77), “Security” ] Change password” ] “Security code” • For the subsequent steps, just like the steps to change the PIN1 code / PIN2 code, enter your current terminal security code, enter a new terminal security code and then enter the same code again for confirmation. C] 2. Enter the current PIN1 code/PIN2 code ] C 3. Enter a new PIN1 code/PIN2 code ] C 4. Enter the same code that you did in Step 3 again ] ]8 You can switch the languages of the FOMA phone between a Jpanese and n Eglish. Setting item/Setting at purchase > P240 1. From the Settings menu (P77), “ “ ”/“English” ”] Next Page 91 Settings Information • This setting is registered in FOMA phone and FOMA card which is inserted now. If you insert other FOMA card which registered other settings, the settings of FOMA card will be preferred. Others Settings miniSD You can check the empty or reserved capacity of miniSD memory card. Resetting the Settings Clearing the Memory C] Settings Checking the Memory Status C] ]91 You can check the usage status and available space of the memories of the handset of the FOMA phone and the miniSD memory card. 1. From the Settings menu (P77), “Others” ] “Memory status” ] Select from the following items Common memory You can check the empty or the reseved capacity (Standard) of the common memory in which data such as My picture, i-motion, Melody are stored. Reserved memory You can check the empty or the reserved capacity of the common memory in which data for Phonebook, Schedule, Memo, Date counter are stored. UIM memory You can check the empty or the reseved capacity (Standard) of the common memory in which data for “Phonebook”, “SMS”. ]921 You can clear all the data recorded in the handset of the FOMA phone and the miniSD memory card. 1. From the Settings menu (P77), “Others” ] “Reset settings” ] “Clear memory” ] Select from the following items • You need to enter your terminal security code for deleting. Handset contents Clears all the data saved in the Data box folder of the FOMA phone. Handset personal info. Clears all the personal data saved in the FOMA phone such as phonebooks, schedule, call history and so on. miniSD Clears all the data saved in the minisd folder of the miniSD memory card. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 92 Y Settings Initializing the Default Settings C] ]922 You can reset to all settings at purchase except for “i-mode setting” and “Mail setting”. 1. From the Settings menu (P77), “Others” ] “Reset settings” ] Default settings “Yes” ] Enter the terminal security code ] Press C • h Wen you reset the date and time, you cannot play span/ period restricted i-motion file. Resetting the holiday C] ]94 You can reset all settings of holiday of FOMA phone to settings at purchase. Settings Information Address If “SMSC” is set to “others”, you can enter the address of the SMS center. 1. From the Settings menu (P77), “Others” ] “Reset holiday” ] “Yes” Changing the Settings for the SMS Center C] ]93 Normally, you do not need to change the settings. You can change the SMS centers to use. Setting item/Setting at purchase > P240 1. From the Settings menu (P77), “Others” ] “SMS center” ] “Select from the following setting items ] After setting, I [Done] SMSC – DoCoMo : You can use the DoCoMo SMS center. – Others : You can use another company’s SMS center. 93 Safety settings Passwords ..............................................96 Preventing the Phone from Activating the Operation of Function ....97 Other Safety Settings .............................98 95 Safety settings Passwords For some functions of the FOMA, you need to enter your password. In addition to the Terminal security Code for operating respective mobile phone functions, the Network Security Code to use network services, and i-mode password are available. These passwords help you utilize your FOMA phone. Safety settings Information for Passwords • Do not use the easy-to-decipher figures such as “Birthday”, “the part of phone number”, “Area code or Room number”, “1111”, “1234” to prevent it from being known by others. Note that you make a memo to set the password. • Make sure that prevent the password from being known by others. If the password is known by third party, NTT DoCoMo will not have any other responsibility concerning the mischief or the mis-use of handset. • There is no request the client's password from NTT DoCoMo. • Note that if you do not remember password, you need to bring an identification card such as a driver's license, FOMA handset, FOMA card to a handling counter such as a DoCoMo shop. For details, consult "DoCoMo Information Center" described on the back page of the manual. 96 Terminal security code The terminal security code is set “0000” at purchase. You can change the terminal security code. To change the code, see “Changing Your Terminal Security Code” (P91). Network Password The Network Security Code is a four-digit number required for using various network services and for various procedures at the “ ” (DoCoMo e-site). The security code is determined at the time of contract. The user has an ID and a password of “My DoCoMo” which is the integrated support site for PC can change new network password through PC. In addition, you can change various procedures of DoCoMo e-site in i-mode. For “My DoCoMo”, “DoCoMo e-site”, see the cover of this manual. i-mode Password The i-mode password is a four-digit password required for registering, deleting My-menu, Messaging service, applying for or cancelling an i-mode password. (The service provider can supply its own password.) The default for i-mode password is “0000”, but you can change it. If you change the password from i-mode, see “Changing i-mode Password” (P126). Safety settings PIN1 code/PIN2 code For the FOMA card, you can set the two security code, namely the PIN1 code and PIN2 code. The default for these security code is “0000”, but you can change these codes as you lock. To change the codes, see “Setting PIN Code Request” (P90), “Changing the PIN1 code / PIN2 code” (P91). Information • If you purchase a new FOMA phone and use the existing FOMA card with new FOMA phone, use PIN1 code and PIN2 code you have set previously. • If you enter a wrong PIN1 code/ PIN2 code three times in succession on the display requiring its entry, the PIN1 code/ PIN2 code is locked automatically. To unlock the code, you need to enter PIN lock release code. a PIN1 Code a PIN2 Code The PIN2 code is the four-to eight- digit code for using the user certificate or applying for the issue of it and executing reset Total Cost. Releasing PIN lock code PIN lock releasing code is a eight-digit password to release locking PIN1 code, PIN2 code. You cannot change it. Information • If you enter a wrong "PIN unlock code" 10 times in succession, it is automatically locked. In case of this, you need to bring the FOMA phone, UIM and an identification card such as a driver's license to a handling counter such as a DoCoMo shop. This FOMA phone does not have this function. Preventing the Phone from Activating the Operation of Function To protect the information or data in FOMA phone, you can activate the security function to prevent from activating the operation or the function. 97 Safety settings The PIN1 code is the four- to eight-digit code for checking the user each time the UIM is inserted into the FOMA phone or each time the FOMA phone is turned on so that you can prevent the third party from using your UIM. If you enter PIN1 code, you can receive or make a call or activate the operation. Safety settings Purpose Setting All Lock After locking FOMA phone, if you don't enter terminal password, you cannot activate the phone. To set this function, see “Setting All Lock” (P90). Setting not to display mail without permission Safety settings You can set the security function for the Inbox, Outbox, and Unsent of the Mail menu. To set this function, see “Display” of “Mail setting” (P145). Other Safety Settings The FOMA phone has the following safety settings in addition to the “Security” function: Purpose To reject calls from specified callers To receive calls from callers registered in the phonebook Not to take nuisance calls Not to take calls from callers not notifying caller ID To receive necessary mail only 98 Function/Service Reference Reject/Accept call P81 Memory reject call P82 Nuisance call barring P194 Caller ID request P194 Receive option P143 To change the mail address To receive/reject mail sent from i-mode phones only To receive mail from specified domains (company) only To reject mail from specified senders To reject 200th and succeeding i-mode messages sent from a single i-mode phone on the same day To reject unsolicited Ad mail To reject SMS reception To store/check safety information when a disaster occurs To stop the mail function temporarily To check the settings for the mail function Function/Service Reference Change mail address Receive/Reject i-mode mail only Receive from specified domain Receive Selected Mail/Reject Selected Mail Selected Mail Senders Refer to “i-mode User’s Manual” Reject unsolicited Ad mail/Reject mail Se/Confirm SMS Rejection Settings i-mode Disaster Message Board Service Suspend Mail Confirm Settings Confirm Settings Multimedia (Camera) Multimedia 1 Camera-mode 2 Movie-mode Multimedia Multimedia Select Select Notes for when using the camera.............100 To display the Multimedia menu Using the Camera ......................................101 On the Stand-by display, Taking Still Images.....................................101 C[Menu] ] or “Multimedia” Shooting Moving Images...........................106 99 Multimedia (Camera) Notes for when using the camera Multimedia (Camera) • If the lens is stained with finger prints or something oily, you cannot shoot clear images. Clean the lens with a soft cloth before shooting images. • If the lens is exposed to direct sunlight for a long time, the color filter inside and images may be discolored. • If shooting or saving images after leaving the FOMA phone in a warm place for a long time, image quality may deteriorate. • Do not cover the lens with fingers, etc. when shooting images. • When the battery level is low, you can't activate camera and movie mode. • If you shoot a fast moving subject, it may be recorded a little off the displayed position. • Be careful not to move your hands when taking a shot. Hold the FOMA phone securely with your hands so that it does not move, or place the FOMA phone in a stable place and use the self timer when taking a shot. • If you move your hands when shooting a moving image or if you shoot a rapidly moving image, the image may be blurred. • If you try to directly shoot a strong illuminant such as the sun and a lamp, the image may become dim or blurred. • The camera has been made with highly precise technologies, and there may be points and lines that always look bright as well as pixels and lines that always look dim. Also, acknowledge that when shooting an image in a place where light intensity is small, it looks a little rough, and noises such as white lines increase. • If the storage location is set to the miniSD memory card, do not pull out the miniSD memory card while you are using the camera. Malfunction of the FOMA phone may result. • If the battery is flat, you are not able to save still or moving shot images. • Since the camera consumes electric power quickly, do not operate the camera for a long time or leave it for a long time. • It may take a long time until images are displayed on the shooting display after starting the camera depending on the settings. • Images shot by the cameras might differ from actual subjects in color tone and brightness. • To protect from taking a picture without informing, the shutter tone will be sounded on manner mode. Also, even when the Flat-plug Earphone/Microphone Set with Switch (option) is attached to the FOMA phone, the shutter sound is emitted from the speaker. 100 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Multimedia (Camera) Using the Camera Copyrights and Rights of Portrait Please respect the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. You can adjust the angle of camera on setting the scene of a person, an landscape or a portrait. Lens Adjust the angle by rotating a camera to an arrow direction. Information • If you shoot an image by adjusting the lens within the FOMA phone as shown, the image is saved as Mirror. Taking Still Images C] ]1 You can take still images. The taken still images are saved into the “Camera” folder of “My picture” in “Data box” of the FOMA phone. You can set the storage location to the miniSD memory card. If you set the storage location to the miniSD memory card, the taken still images are saved into " y picture”. To save the images, you can se t “Save to” (P104). Next Page 101 Multimedia (Camera) You have no right to copy, modify, or distribute the contents of which a third party holds the copyright such as text, images, music, or software downloaded from web pages on the Internet, or images shot by the cameras of this product without permission from the copyright holder except for when the copy or quote is for personal use that is allowed by the Copyright Law. Note that it may be prohibited to shoot or record live performances or exhibitions even for personal use. Make sure that you refrain from taking portraits of other persons and distributing such portraits over the Internet without consent, as this violates portrait rights. Multimedia (Camera) 1. In Stand-by mode, press G • M[Menu] : You can delete the picture in sub-menu. > P105 After taking a multishot After taking a multishot (P103), you can view the display as follow. Camera Menu Rec. Album Multimedia (Camera) • H/FE: You can set the magnification of the image. • J: You can change the brightness of the image. • I[Album]: You can view the “Camera” folder of “My picture”. 2. After confirming the subject, C Menu View Mail The file size of selected one • C[View]: You can use a zooming in the selected file. • I[Mail]: You can compose i-mode mail with attaching the selected file. Go to step 2 on page 139 of “Composing i-mode mail”. • Q: Returns back to Stand-by mode to take a picture. Saved Menu OK Mail • I[Mail]: You can compose the message with attaching the image. Go to step 2 on page 139 of “Composing i-mode mail”. • C[OK]: You can save the image. 102 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Multimedia (Camera) Icons on the Still Image Finder Stand-by Screen • Indicates the status of the still image shot setting. Icon Description Camera mode (Still image shot mode) Storage location Handset memory miniSD Remaining number of shots Light settings OFF Automatic Always on Size restriction No restriction 100KB 9KB Auto timer You can set up functions to take still images. Setting item/Setting at purchase > P242 1. From the Finder Stand-by display (P102), M [Menu] ] Select from the following submenu items by using J ] After setting, C ] I [Close] (Size) You can set the photo size. (Quality) You can set the image quality to store shots of still images. (Light) You can set the radiation method of flash when taking a shot. Size Zoom Brightness Storage image quality setup Multishot Using the Sub Menus of the Still Image Finder Stand-by Screen Super fine Fine Normal – OFF : Does not flash – Auto : Automatically flashes according to the shooting conditions such as when shooting in a dark place – Always on : Always lights while the camera is on – When taking : Always flashes when pushing the shutter regardless of the brightness of the shooting location. Next page 103 Multimedia (Camera) When taking 1: The remaining number of shots varies depending on the settings of shooting. (The value is for a reference.) 2 : The value varies depending on the value set. Multimedia (Camera) (Multishot) You can set the number of continuous shots of still images to be taken by pushing the shutter. (Shutter sound) You can set a tone to sound when the shutter is pushed. • If you select an item, a sample tone sounds. (Zoom) You can set the magnification of the image. (Size restriction) You can limit the size to store shots of still images. (Brightness) You can set brightness (exposure) of the image. (Flicker tuning) You can set the frequency to protect from waving the screen. Multimedia (Camera) (White balance) You can revise the color tone for the image. This setting is for a shot image with an unnatural color tone. (Night mode) This setting is for when taking a shot in a dark place, etc. (Frame shot) This setting is for when taking a shot with a frame attached to the subject. Select “Choose Frame” and select a frame using J > Press C. (Auto timer) You can set Auto timer. Select the number of seconds between pressing the shutter and starting taking a shot. (Effect) This setting is for when taking a shot with special effect applied to the image. 104 (Save to) You can set the location to store shots of still images. Information • If taking a shot with the “size” set to “1280x1024”, you cannot use the zoom. • If “Multishot” is set, the “Size” automatically changes to “320x240”. After setting Multishot off, you cannot change the size any more. • If the “Frame shot” is set, the “size” automatically changes to “176x220”. After the Frame shot, Multishot have been set off, you cannot change the “Size”. • You cannot set “Multishot” and “Frame shot” at the same time. • If you are unable to store in the size set in “Size restriction”, automatically lower the resolution to store images. • If “Size restriction” has been set to “100KB” or “9KB”, you cannot set up “Quality”. • If “Size restriction” has been set to “9Kbyte”, you cannot take images in “Multishot” or “Frame shot”. Multimedia (Camera) • If you set Flicker tuning, twinkling will not be removed completely depending on the environment or the color tone of actual subject. • For the frame image stored by default, see “Frame” (P250) in “Data stored by default”. Using the submenus of the Still Image Shooting End Screen Setting item/Setting at purchase > P243 New picture The Finder screen returns. Mark/Unmark You can delete the file which was shot by multishot. After selecting the file, press M [Menu] > “Delete”. – Mark : You can mark a file at a time. – Mark all : You can mark all the files collectively. – Unmark : You can unmark the file marked by “Mark” or one of the files marked by “Mark all” at a time. – Unmark all : You can unmark the file marked by “Mark” or all the files marked by “Mark all”. Multimedia (Camera) 1. From the Still Image Shooting End Screen (P102) / Multishot Shooting End Screen (P102), M[Menu] ] Select from the following submenu items Send via mail You can attach shots of still images to i-mode mail for sending. Go to step 2 (P139) of “Composing i-mode mail message”. Delete (Selected shot ) You can delete a shot of a still image. Set as wallpaper You can select the “Main display” or “Sub display” to set as wallpaper. Slide show – Go : You can display still images shot in Multishot in order. – Settings : You can set up “View as” and “Time interval (secs)” for slide show. After setting, press I[Done]. Make animated GIF You can select multiple files to create animation. After selecting files, press I[Make]. Sort by You can sort files. View by You can change file display methods. File property You can display the name, size and type of the file being selected. : Displayed only after taking images in Multishot. 105 Multimedia (Camera) 2. After confirming the subject, C Shooting Moving Images C] ]2 You can shoot moving images. The shot moving images are saved into the “Camera” folder of “i-motion” in “Data box” on the handset. You can set the storage location to the miniSD memory card. To save the image in miniSD memory card, set icon (P108). 1. From the Multimedia menu (P99) , “Movie-mode” Illuminates in red during shot. Shot elapsed time/maximum shot time Shot elapsed time is displayed with a bar. Stop • H/FE: You can change the magnification of an image. Multimedia (Camera) • Q: If you press this key on recording, the moving image is not saved, and return to stand-by mode to take a picture. Menu Rec. Album < Moving Image Finder Stand-by> • C[Stop]: Press this key to end the camera. 3. The shooting is ended. • H/FE : You can change the magnification of the images. • J : You can change the brightness of the images. Saved • I[Album]: You can view the folder of “Camera” in “i-motion”. Menu OK Mail 106 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Multimedia (Camera) • I[Mail]: You can compose i-mode mail with attaching the selected file. Go to step 2 on page 139 of “Composing i-mode mail”. • C[OK]: Return to the Moving Image Finder Stand-by screen. • M[Menu] : You can delete the picture in sub-menu. > P105 Icons on the Moving Image Finder Stand-by Screen • Indicates the status of the moving image shot setting. Description Movie mode (Taking a moving image) Light settings (Always on/when recording) Recording time (for Mail) Movie type Sound+Video Video only Sound only • See “Icons on the Still Image Finder Stand-by Screen” (P103) for other Icons. Using the Submenu of the Moving Image Finder stand-by Screen (Quality) You can set the image quality to store shots of moving images. (Light) You can set the radiation method of flash when shooting. – OFF : Does not flash. – Always on : Always lights while the video camera is on. – When recording : Always lights while recording regardless of the brightness of the shooting location. (Zoom) You can set up the magnification of the images. (Brightness) You can set up brightness (exposure) of the images. (White balance) You can revise the color tone for the images. This setting is for shot images with an unnatural color tone. (Night mode) This setting is for when shooting a shot in a dark place, etc. You can set up functions to shoot moving images. Setting item/Setting at purchase > P243 Next page 107 Multimedia (Camera) Icon 1. From the Moving Image Finder Stand-by screen (P106), M [Menu] ] Select from the following submenu items by using J ] After setting, C ] I [Close] Multimedia (Camera) (Effect) This setting is for when shooting a shot with special effect applied to the image. (Recording time) You can set the recording time for moving images. (Flicker tuning) You can set the frequency to protect from waving the screen. (Save to) You can set the location to save shots of moving images. Multimedia (Camera) (Type) You can set whether or not images / sound are recorded when shooting moving images. Using the Submenus of Moving Image Shooting End Screen 1. From the Moving Image Shooting End screen (P106), M [Menu] ] Select from the following submenu items New movie The Finder screen returns. Send via mail You can attach shot moving images to i-mode mail for sending. Go to step 2 (P139) of “Composing i-mode mail message”. Delete You can delete shot moving images. Information • If “Recording time” is set to “Mail attach”, the recording time varies according to the “Quality” setting. • When you set “Recording time” to “60 mins”, you save the date in miniSD memory card. • If you set Flicker tuning, twinkling will not be removed completely depending on the environment or the color tone of actual subject. 108 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 i-mode i-mode Select Select i-mode Menu ........................................110 To display the i-mode menu What is i-mode? ...................................110 On the Stand-by display, Displaying the iMenu display...............110 C[Menu] ] or “i-mode” Displaying Sites from Bookmark .........111 Displaying Screen memo .....................112 Displaying Last URL.............................113 Displaying Internet Web Pages ...........113 Displaying MessageR/F .......................114 Checking Whether Center Holds MessageR/F .........................................117 Setting Functions of i-mode ................117 Displaying Sites....................................120 How to See/Use Sites ..........................122 Using My Menu ....................................125 Changing i-mode Password ................126 109 i-mode i-mode Menu The i-mode menu is the basic display for viewing various sites and Internet web pages. You can use each function of i-mode from the i-mode menu. Menu item Menu Bookmark Screen memo Description Connects to the i-mode Center Displays your favorite sites and Internet web pages. Displays pages of sites, etc. saved in the FOMA phone. What is i-mode? i-mode is the online service that makes use of the display of the i-mode phone to enable you to use convenient information from i-mode sites (programs) and homepages supporting i-mode and to exchange mail easily. • Refer to “i-mode User’s Manual” for details. • Not all the services described in “i-mode User’s Manual” are supported. Check the description of the models supporting each service with “i-mode User’s Manual”. Displaying the iMenu display i-mode Last URL Displays the most recently accessed site or Internet web page. Go to location Enter URL to connect to the internet. You can access each i-mode site from iMenu. Message Displays a list of the received MessageR/F. Check new message You can check whether the i-mode Center holds mail and MessageR/F. 1. From the i-mode menu (P109), “iMenu” • Refer to “i-mode User’s Manual” for items displayed on the iMenu display. • See “Displaying Sites” (P120) for the subsequent operations. i-mode setting You can set the FOMA functions related to i-mode. 110 C] ]1 i-mode Displaying Sites from Bookmark C] ]2 You can directly access your favorite sites from Bookmark. • For the registration method, see “Using the Submenus of the Site Screen” (P120). 1. From the i-mode menu (P109), “Bookmark” Select 2. Select a bookmark ] C • Connected to the site. Using the Submenus of the Bookmark List Screen 1. From the Bookmark List screen (See above), M[Menu] ] Select from the following submenu items i-mode Menu Edit bookmark You can edit the title and URL of the selected Bookmark. After editing, press I [Done]. Delete You can delete the selected Bookmark. Delete selected You can select and delete multiple Bookmarks. After selecting, M [Menu]>Select “Delete” Delete all You can delete all the Bookmarks registered. To delete all, C > Enter terminal security code > C [Done]. URL You can display the URL of the selected Bookmark. Copy URL You can copy the URL of the selected Bookmark. For the copy, see “Copying/Cutting/Pasting” (P209). Compose message You can paste the URL of the selected Bookmark to the text of i-mode mail and send it. Go to step 2 of “Composing i-mode mail” (P139). Ir exchange You can send the selected Bookmark using infrared rays. For details, see “Using the Infrared Exchange Function” (P174). Connect You can connect to the selected Bookmark site. 111 i-mode Displaying Screen memo C] ]3 You can display the web pages saved without connecting to i-mode. • For the registration method for the site screen, see “Using the submenus for the Site screen” (P120). 1. From the i-mode menu (P109), “Screen memo” Screen memo Icon Description Unprotected Screen memo i-mode Protected Screen memo Menu Select 2. Select a screen memo ] C • The Screen Memo List screen appears. Using the Submenus of the Screen Memo Screen 1. From the Screen memo List screen See above M [Menu] ] Select from the following submenu items View You can display the selected screen memo. 112 Edit title You can edit the title of the selected screen memo. Delete You can delete the selected screen memo. Delete selected You can select and delete multiple screen memos. After selecting, M [Menu]>Select “Delete”. Delete all You can delete all the screen memos. To delete all, C > Enter terminal security code > C [Done]. URL You can display the URL of the selected screen memo. Protect ON/OFF You can give or cancel protection for the selected screen memo. You cannot delete protected screen memos. Using the Submenus of the Screen Memo Screen 1. From the Screen memo display See left M [Menu] ] Select from the following submenu items Save graphics 1 You can select and save an image contained in a screen memo. You can confirm the saved image by “My picture” of “Data box”>”i-mode” folder. >P154 i-mode 1: Not selected this menu in case the screen memo does not include an image. 2: Not selected this menu in case the certificate is not used as a screen memo. 3: Not selected this menu in case screen memo does not include of GIF animation. 1. From the i-mode menu (P109), “Last URL” ] I [Done] Information • If you press C in screen of URL, you can edit the latest URL address. Displaying Internet Web Pages C] ]5 You can display web pages supporting i-mode and directly access sites from the history of the sites you visited by entering their URLs. 1. From the i-mode menu (P109), “Go to location” ] Select from the following items Input address You can display Internet web pages supporting i-mode by entering URLs. After entering, press I [Done] to access. URL history You can directly access sites by selecting URLs you visited from the URL history. Displaying Last URL C] ]4 When you end i-mode, the URL of the page displayed last is stored as “Last URL”. By using “Last URL”, you can connect to the site or Internet web page you visited last time. Information • You can enter URL up to 256 characters by half width. • You can view the list up to 50 address in URL history. • Depending on the type of the accessed Internet site, the page might not be displayed correctly. Next Page 113 i-mode Show properties – URL : You can display the URL of the displayed screen memo. – Page properties : You can check the title and URL of the displayed screen memo. – Certificates 2 : You can display the certificate used by the displayed screen memo. Retry 3 A GIF animation is played back from the beginning. Edit title You can edit the title of the displayed screen memo. Delete You can delete the displayed screen memos. Protect ON/OFF You can activate or cancel protection for the displayed the page. You cannot delete protected saved pages. i-mode • Web pages other than Internet web pages supporting i-mode might not be displayed correctly. Using the Submenus of the URL Screen 1. From URL history screen, press M ] Select submenus i-mode Connect You can connect the site in URL history. Edit URL You can connect URL in history after editing URL address. Delete You can delete the history of URL. Delete all You can delete the history of all URL to register. To delete all, C > Enter terminal security code > C [Done]. Compose message You can compose i-mode mail with attaching URL to the text. Go to step 2 on page 139 of “Composing imode mail”. 114 Displaying MessageR/F C] ]6 You can display received MessagesR/F. • MessageR: Your required information is delivered automatically once you apply for the message service on the site providing the service. • MessageF: Messages are delivered free of charge by performing the Received settings in the option settings. Refer to “i-mode User’s Manual” for how to set it up. : If you register FOMA service since October 1, 2004, the default setting is Received. i-mode 1. From the i-mode menu (P110), “Message” ] “MessageR”/“MessageF” MessageR Information • You can save MessageR up to 100 and MessageF up to 50. Depending on the size of message, the number of message to save can be reduced. Icons on the MessageR/F List Screen and the Display MessageR/F Screen Icon Menu Select • J/FE: You can check the previous or next page when the multiple pages are. Description Unread MessageR/F Read MessageR/F Protected MessageR/F MessageR/F with a file attached or pasted i-mode 2. Select a MessageR/F to display ] C Subject Received date and time A melody is attached or pasted. Attached melody An image is attached. Menu Select A file with the UIM operation restriction function set up is attached. • J: Displays the history of messageR/F. • FE: You can scroll the screen. Next Page 115 i-mode Using the Submenus of the MessageR/F List Screen Setting item/Setting at purchase > P244 1. From the MessageR/F List screen (P115), M [Menu] ] Select from the following submenu items i-mode Delete You can delete the selected MessageR/F. Delete selected You can select and delete multiple MessagesR/F. After selecting, M [Menu] > Select “Delete”. Delete all You can delete all the MessagesR/F. To delete all, C > Enter terminal security code > C [Done]. Protect ON/OFF You can give or cancel protection for the selected MessageR/F. You cannot delete protected MessagesR/F. Sort You can sort MessagesR/F displayed on the List screen. Filter You can change types of the MessageR/F displayed on the List screen. Using the Submenus of the Display MessageR/F Screen 1. From the Display MessageR/F screen (P115), M [Menu] ] Select from the following submenu items Delete You can delete the displayed MessageR/F. Protect ON/OFF You can give or cancel protection for the displayed MessageR/F. You cannot delete protected MessagesR/F. Add to phonebook 1 You can add phone number or mail address displayed on the MessageR/F to phonebook. Go to step 2 on page 58 of “Adding to the phonebook”. Save pasted data 2 You can save the melody ( ) to attach the message request/ free. You can view the saved melody “Melody” of “Data box” > “i-mode” folder. > P164 Save attach file 2 You can save the melody ( ) or image ( ) to attach the MessageR/F. You can view the saved melody or the image “Melody”/“My picture” of “Data box” > “i-mode” folder. > P154, P164 1: You can select this menu after selecting the phone number or mail address to register. If the item to register does not exist, you cannot activate this function. 116 i-mode 2: You can activate this function after selecting the file saved in. If the file to save in you cannot select this menu. Automatically Receiving MessageR/F If you receive a MessageR/F, contents of the MessageR/F are automatically displayed. • If the i-mode Center holds i-mode mail and/or a MessageR/F, an icon (P31) is displayed. Note that the icon may not be displayed if i-mode mail or a MessageR/F arrives at the imode Center while the FOMA phone is turned off. Setting Functions of i-mode 1. Receive a MessageR or MessageF • (White) or (White) is displayed. You can set functions of i-mode and MessageR/F. 2. The reception results are displayed • To confirm the received MessageR/F right away, select “MessageR”/”MessageF” and then press C. • Q: Returns to previous screen. ]7 You can check whether the i-mode Center holds any imode mail and/or MessageR/F that arrived when the phone was out of the service area or turned off. 1. From the Stand-by screen, press M [Mail] at least for two seconds • The Check Result screen appears. To read the received MessageR/F right away, select “MessageR”/”MessageF” and then press C. Home C] ]81 You can set the URL of a web page displayed when “Home” is selected and whether to enable/disable “Home” (P121). i-mode Checking Whether Center Holds MessageR/F C] Information Setting items/Setting at purchase > P224 1. From the i-mode menu (P109), “i-mode setting” ] “Home” 2.“Enable” or “Disable” 3. Select the URL field ] C ] Enter a URL ] C • If “ [Done] Disable” is selected, you cannot enter a URL. 4. I [Done] 117 i-mode View Certificates C] ]82 You can set functions related to displaying sites and screen memos. Setting at purchase > P224, 225 1. From the i-mode menu (P109), “i-mode setting” ] “View” ] Select from the following setting items ] After setting, I [Done] i-mode Character size You can change the character size for text of sites, screen memos pages and MessagesR/F. Image display You can set whether to display images contained in sites, and screen memos. Scroll You can set the number of lines scrolled when pressing H on a display displaying text of sites, screen memos and MessagesR/F. Message list disp. You can set whether to display contents of a MessageR/F in line (1/2 line). Pasted melody You can set whether to activate a melody of received messageR/F. (If you set “Cancel”, the melody is deleted.) : MessageR/F is displayed regardless of setting of image display. 118 C] ]83 You can set a certificate used for displaying SSL-enabled sites. 1. From the i-mode menu (P109), “i-mode setting” ] “Certificates” ] M [Menu] ] Select from the following setting items Certificate info You can view the selected certificate. Valid/Invalid You can set whether to validate or invalidate the selected certificate. • You can check the status of a certificate by the following symbols. : Valid : Invalid Information • If “Valid/Invalid” is set to “Invalid”, you cannot display the sites with that certificate. i-mode Others C] ]84 You can set i-mode connection timeout and the type of message to check. You can also check the i-mode settings. Setting items/Setting at purchase > P225 1. From i-mode menu (P109), “i-mode setting” ] “Others” ] Select from the following setting items Information • Even when you have set “Connection Timeout” to “Unlimited”, you may be disconnected owing to radio wave conditions. 119 i-mode Connection timeout It may take long to download from some sites. You can set the time to wait before cancelling downloading. (60 seconds, 90 seconds, Unlimited) After setting, press I[Done]. i-motion auto play You can set whether to play back an i-motion movie automatically, for when you have downloaded a standard (normal) type of i-motion movie from a site. After setting, press I[Done]. Check new message You can set the type of message to check for when you “Check new message” from i-mode mail, MessageR and MessageF. After setting, press I [Done]. Check settings You can check the individual “i-mode setting”. Reset settings You can reset each of the “i-mode setting” to their defaults. To reset the settings, C > Enter terminal security code > C [Done]. Reset data Deletes all data related to i-mode (Bookmark, Screen memo, URL history) except for MessageR/F. But, you cannot delete the message saved in UIM. To reset the data, C > Enter terminal security code > C [Done]. i-mode Displaying Sites You can connect to sites by easy key operation, and use various types of services offered by IPs (Information Service Providers). (For some sites, you might need to apply to the IPs separately.) 1. From the i-mode menu (P109), “iMenu” • blinks during i-mode communication. 2. Select an item (link) ] C Menu list i-mode Menu Select • FE: You can scroll the menu. • P: You can end i-mode. Information • If there is a number in front of the item showing the link, you can connect to that link directly by pressing the same number on the keypad. Note that some sites cannot be connected. • Depending on the site, images might not be displayed. • Depending on the site connected, the confirmation screen might appear stating that mobile phone information is sent. Your mobile phone information (the model and the serial 120 number of your mobile phone) is sent to the IP (Information Service Provider) over the Internet, so could be deciphered by third parties. The phone number, address or age are not sent to IP (Information Service provider). Using the Submenus of the Site Screen 1. From the Site screen (left), M[Menu] ] Select from the following submenu items Add bookmark You can add the URL of the Site screened to Bookmark. You can register the site as a Bookmark (Edit mode for title and URL) by pressing I [Done]. You can access directly the site from the registered bookmark. Add screen memo You can save a displayed web page as a screen memo. You can display screen memos without connecting to i-mode. > P112 Save graphics 1 You can select and save an image contained in a web page. > P124 Show properties – URL : You can check the URL of the displayed site. – Page properties : You can check information on the displayed web page. – Certificates 2 : You can check the certificate used by the displayed site. i-mode Change char. code When characters are not displayed correctly, you can convert them to the correct ones. Add to phonebook 3 You can add the phone number and mail address displayed on the web page to the phonebook. Go to step 2 on page 58 of “Adding to phonebook”. Retry 4 You can play back a GIF animation from the beginning. 1: You cannot activate this menu in case the image to save is not included in a site or “Image” is set to not display. (P118) 2: If you don't have a certificate to access the site, you cannot use this menu. 3: After selecting the phone number or mail address to register, you can activate this menu. Otherwise, you cannot activate it. 4: You cannot activate this menu when GIF animation is not included on displayed site. 121 i-mode Bookmark list You can view a list of bookmarks registered by “Add bookmark”. If you select a bookmark, you can directly access the site. Go to location – Input address : You can access web pages supporting i-mode by entering URL. After entering it, and then pressing I [Done], you can connect the site. – URL history : You can select the URL history of a displayed site to directly access the web page. Screen memo list You can view a list of pages saved as “Screen Memo”. You can display the saved page by selecting it. Menu You can bring up the iMenu display. Home You can display the web page registered as “Home” (P111). Reload You can reload data of a site. The contents of the site will change to the latest information each time you reload if the site has been updated. Compose message You can send the URL of site being displayed or the URL for link with them inserted in the message. Go to step 2 on page 139 of “Composing message”. i-mode Information • A few sites cannot be allowed to save as a bookmark. • When characters are not displayed correctly even after “Change char. code”, repeat the operation. However, even when you repeat this operation, the correct characters might not come up. The original characters are displayed if you repeat the operation four times. • If you “Change char. code” when the correct characters are displayed, wrong characters might come up instead. SSL Pages i-mode SSL pages use data encryption for data transmission to prevent hacking and source-file overwriting so that you can more safely exchange personal information. • If you try to display an SSL-enabled page, the SSL communication starting message appears. When an SSL page is displayed, appears. • When moving from an SSL page to a regular page, the confirmation display appears. After “Yes” is selected, a regular page is displayed and disappears. How to See/Use Sites Entering/Selecting Information on Sites When you use a site, you may enter characters (text box) or select an item from multiple choices (radio button, checkbox, pull down menu). Display Example Name Description Unselected Selected Radio button Used for item selection. You can select only one item. Unselected Selected Checkbox Used for item selection. You can select multiple items. Text box You can enter characters. Pull down menu Used for item selection. If you select a pull down menu, a list of selectable items is displayed. ID Password Tokyo Saitama Kanagawa 122 i-mode Returning to Obtained Previous Page/Going to Obtained Next Page Information • You can add phone number information displayed on a web page to the phonebook from the submenu of the site screen. The FOMA phone stores the last few screens displayed. 1. To display the previous page, L To display the next page, R Operations from Highlighted Information You can easily make a call, send mail, and display Internet web pages using highlighted information (phone numbers, mail addresses, URLs, and so on) displayed on sites and in mail and MessageR/F. Mail To function You can send mail by selecting displayed information such as a mail address. • You may not be able to use the Mail To function depending on the site. 1. Select information such as a mail address ] C • Go to step 2 of “Composing i-mode mail” (P139). Information You can make a call by selecting displayed information such as a phone number. • You may not be able to use the Phone To/AV Phone To function depending on the site. 1. Select information such as a phone number ] C 2. “Voice call”/“Video-phone call” • You can send make a call after setting the Caller ID notification depending on the screen. • You can add mail address information displayed on a web page to the phonebook from the submenu of the site screen. Web To function You can display a web page by selecting displayed information such as URL. • You may not be able to use the Web To function depending on the site. Next page 123 i-mode Phone To function/AV Phone To function i-mode 1. Select information such as URL ] Press I [Yes] • If the confirmation screen to connect appears, press I [Yes]. i-appli To function You can start i-appli by selecting the displayed URL (link). 1. Select i-appli information ] C ] I [Yes] • After downloading is done, the screen for confirmation will be displayed. Information i-mode • If “i-appli To” (P150) is set to “OFF”, you cannot start i-appli by this operation. Downloading Images from Sites You can set images saved from the displayed web page or screen memos. You can check the saved images by “My picture” of “Data box” > “i-mode” folder. > P154 1. Displaying Site/ Saved Page screen ] M [Menu] ] “Save graphics” ] C ] Select an image ] C ] “Yes” Information • Some images cannot be saved. • You cannot select “Save graphics” if the image to save is not included or “Image” (P118) is set to not to save. 124 Downloading i-melody from Sites You can download a melody from a site and set it. 1. Display a site that supports downloading of melodies ] Select a melody ] C • After the download is completed, the confirmation screen appears. 2. Video content menu • Save: You can save the downloaded melody. • Play: You can play the downloaded melody. • File property: This menu allows to view the information of i-motion downloaded from network. • Back: The menu is returned back to the site not saving the melody. Information • Depending on the site, you might not be able to download melodies. • Some downloaded melodies might not be played back successfully. i-mode Using My Menu Obtaining i-motion Movies from Sites The i-motion movie is a moving image file containing images and sound. You can obtain i-motion movies from sites supporting i-motion movies. > Check the “i-mode” folder (P161). • See “i-mode User’s Manual” for details. 1. Select an i-motion movie on a site that supports downloading of i-motion movies ] C • After downloading is done, the screen for confirmation will be displayed. Information Registering Sites in My Menu 1. Bring up the page of the site to be registered ] Select “Register My Menu” ] C 2. Select the i-mode password text box ] C ] Enter the i-mode password ] C ] ”Select” • See “Changing i-mode Password” (right) for i-mode password. Information i-mode 2. Video content menu • Save: You can save the i-motion downloaded from network. • Play : This menu allows to play i-motion downloaded from network. • File property : This menu allows to view the information of i-motion downloaded from network. • Back : This menu allows to return the site not saving i-motion. If you register frequently used sites in My Menu, you will be able to access them easily. • Some sites cannot be registered in My Menu. • When you subscribe to a pay site in Menu List, it will be registered in My Menu automatically. Displaying Sites from My Menu 1. From the Stand-by display, I ] ”iMenu” ] ”My Menu” ] Select a site to access ] C • You can change the playback methods for while downloading i-motion movies. > P119 • Some downloaded i-motion movies might not be played back correctly. • You cannot download i-motion movies in the streaming type and the ASF format. 125 i-mode Changing i-mode Password The “i-mode password” (four digits) is required to subscribe to and unsubscribe from message services and i-mode pay sites, and to do i-mode mail settings. At purchase, this password is set to “0000” (four zeros), so you need to change it to your own i-mode password. Be sure not to let others know your i-mode password. 1.On the Stand-by display, I ] “iMenu” ] “Options” ] “Change i-mode Password” i-mode 2. Select the “Current Password” text box ] C ] Enter your i-mode password (four digits) ] C • At purchase, the setting is “0000”, so enter “0000” for the first time. 3. Select the “New Password” text box ] C ] Enter a new i-mode password (four digits) ] C 4. Select the “New Password (Confirmation)” text box ] C ] Enter a new i-mode password (four digits) ] C ] “Select” • Enter the same number that you did in step 3. Information • If you forget your i-mode password, you can have it reset to “0000” at a handling counter such as a DoCoMo shop. You will be required to show your official identification (driver’s license, etc.). 126 Mail Inbox Mail Select Select Mail Menu .............................................128 To display the Mail menu i-mode Mail...........................................128 On the Stand-by display, Displaying Mail in Inbox.......................129 C [Menu] ] or “Mail” Displaying Mail in Outbox ....................134 Displaying Mail in Unsent message ....137 Composing Mail ...................................139 Checking New i-mode mail and Message ...............................................143 Receiving Selected Mail ......................143 Checking whether Center Holds SMS....144 Changing Mail Settings........................144 127 Mail Mail Menu On the mail menu, the mail functions offered by the FOMA phone are displayed. Menu item Inbox Description You can check the records and contents of received i-mode mail and SMS messages. Outbox You can check the records and contents of sent i-mode mail and SMS messages. Unsent You can check the contents of temporarily message saved i-mode mail and SMS messages. Compose mail You can bring up the display to compose i-mode mail/SMS. Mail Check new You can receive i-mode mail held at the i-mode message Center by checking the SMS Center. Receive option You can check the subjects of i-mode mail held at the i-mode Center and select mail to receive, or delete mail at the Center before i-mode Mail The i-mode phone has the mail functions for exchanging email (electronic mail) via the Internet. You need to subscribe to “i-mode” to use i-mode mail. • See “i-mode User’s Manual” for more details. • This model does not support all the services described in “i-mode User’s Manual.” Check which models support which services in “i-mode User’s Manual.” SMS messages (short messages) You can send and receive SMS messages between FOMA phones without subscribing to i-mode. Sending and receiving SMS messages with subscribers to overseas carriers in addition to DoCoMo are also available. For information on the countries and overseas carriers with which SMS messages can be exchanged, see DoCoMo’s web site. • Refer to “Network Services User’s Guide” for more details. receiving it. Check new You can receive SMS messages by checking the SMS SMS Center. Mail setting You can change the settings of each mail function of the FOMA phone. 128 Displaying Mail in Inbox C] ]1 The inbox folder list is displayed. You can sort mail by folder. When you open a folder, you can check the records and contents of received i-mode mail and SMS messages. Mail 1. From the Mail menu, “Inbox” Folder Inbox (1) SenderŦ The number of not read mail The date to receive the mailŦ SubjectŦ Menu Menu Select 2. Select a folder ] C Inbox The time to receive the mailŦ1 SenderŦ2 SubjectŦ3 DoCoMo Taro • J/FE: You can view previous or after pages. 3. Select mail ] C • I[Reply]: You can reply the receiver. Go to step 3 on page 139 of “Composing i-mode mail” / step 3 of page 141 “Composing SMS”. • J: You can view previous or next mail. • FE: You can scroll the screen. Mail Ŧ1: The mail you receive is displayed on a time basis that day. From Hanako the next day on, each message is displayed by the date when you DoCoMo Ichiro received it. Menu Select Ŧ2: The name is displayed when the entry is saved in phonebook. Ŧ3: SMS is displayed as “SMS” Reply Ŧ: The menus are displayed same as Ŧ2 ~ Ŧ3 of screen in the list of received mail. Information • To delete all displayed the contents in box setting “Security” (P145) C > Enter terminal security code > C [Done]. • The deco mail via FOMA phone includes of text and URL. If you select the URL, you can read deco mail. > P134 • You can save mail/SMS the maximum up to 400. Depending on the size of mail/SMS, the number of mail/SMS to save can be reduced. Icons on the Received Mail Folder List Screen Icon (gray) Description Folder without unread mail/ SMS messages Next Page 129 Mail Icon Description Icon Description (gray) Folder with unread mail/ SMS messages Mail received as To-type or sender (blue) Created folder without unread mail/ SMS messages Mail received as Cc-type Created folder with unread mail/ SMS messages Received date and time A melody is pasted. (blue) Received Mail List and Marks on Display Screen Mail received as Bcc-type i-appli launch information is pasted. i-appli launch information is damaged. Icon Description Unread mail Read mail Unread SMS messages Mail Read SMS messages Unread SMS reports Read SMS reports Unread SMS messages in the UIM Read SMS messages in the UIM Protected mail/ SMS messages Forwarded mail/ SMS messages Replied mail/ SMS messages Mail with a file attached or pasted Mail with a file to which the UIM restrictions are set attached Subject 130 A melody is attached. An image is attached. An image of 10000 byte over is attached. An i-motion file is attached. An pasted melody is damaged. An pasted data is damaged. Using the Submenu of the Received Mail Folder List Display 1. On the Received Mail Folder List screen (P129), M [Menu] ] Select from the following submenu items Create folder You can add a folder. Rename folder You can edit the name of the selected folder. Mail Delete folder You can delete the selected folder. You cannot delete a folder in which mail is saved. Auto-sort You can set sort conditions to the selected folder. Go to step 2 of “Distributing the received mail to the folder automatically” (P133). : These operations are not available when you select Inbox. Using the Submenu of the Received Mail List Screen Setting item/Setting at purchase > P244 1. On the Received Mail Folder List screen (P129), M [Menu] ] Select from the following submenu items 1: You cannot use this menu of SMS in the UIM. 2: You cannot use this menu in protected SMS or SMS delivery report. Information • You can move mail messages from the created folder by user to the pre-installed folders. • If the inbox is full, the read mail will not be deleted until the space is available to receive new mail. Using the Submenu of the Received Mail Display Screen 1. On the Received Mail Folder List screen (P129), M [Menu] ] Select from the following submenu items Reply You can reply after selecting the method to reply. Go to step 3 on page 139 of “Composing i-mode mail”/ step 3 on page 141 “Composing SMS”. Next Page 131 Mail Move to folder 1 You can move the selected mail to other added folders. Delete You can delete the selected mail. Delete selected You can select and delete multiple mail messages. After selecting mail messages, M [Menu]. > Select “Delete”. Delete all You can delete all mail messages in the folder. To delete all, C > Enter terminal security code > C [Done]. Protect ON/OFF 1 You can set or cancel the protection to the selected mail. Protected mail cannot be moved/deleted. Sort You can sort the mail messages displayed on the List display. Filter You can change the type of the mail messages displayed on the List display. UIM 2 You can move and copy the selected SMS message to the UIM, and move and copy the SMS messages in the UIM to the FOMA phone. Mail Mail – Reply 1: You can reply to the sender of i-mode mail from the detailed received mail list. – Reply quoted 1: You can send the reply with quoting the original text in your received i-mode mail. – Reply all 1: You can reply all receivers and senders at the same time. – Reply quoted all 1: You can reply all receivers and senders with quoting the original text in your received i-mode mail. Forward You can forward the displayed mail to other party. Go to step 2 (P139) of “Composing i-mode mail” or step 2 (P141) of “Composing SMS messages. Move to folder 2 You can move the displayed mail to other added folders. Delete You can delete the displayed mail. Protect ON/OFF 2 You can set or cancel the protection to the displayed mail. The protected mail messages cannot be moved/deleted. Store address You can register mail address/ phone number of receiver on displaying the mail. Go to step 2 on page 58 of “Adding to Phonebook” 132 Add to phonebook 3 You can add the mail address included with other address and phone number of the sender of the displayed mail to the phonebook. Go to step 2 of “Adding to Phonebook” (P58). Save pasted data 1 4 You can save the melody ( ) pasted to the displayed mail. You can check the saved melodies by selecting “Data box”. >“Melody”. > “i-mode” folder. > P164 Save attach file 4 You can save an image ( ) and a melody ( ) of up to 10000 bytes attached to the displayed mail. You can check the saved images by selecting “Data box”. > “My picture”. > “i-mode” folder. > P154, P164 Copy • After selecting the item, see “Copying/Cutting/Pasting” (P209). – Body: You can copy the text. – Subject 1: You can copy the title. – Sender: You can copy e-mail address or phone number to sender. UIM 5 You can move and copy the displayed SMS message to the UIM, and move and copy the SMS messages in the UIM to the FOMA phone. 1: This menu is not displayed in SMS. 2: You cannot use this menu in SMS of UIM. Mail 3: You can activate this menu after selecting mail address and phone number to register. Otherwise, you cannot activate this function. 4: You can activate this menu after selecting the file to save. If the file does not exist, you cannot activate this function. 5: You cannot activate this menu in i-mode mail, protected SMS. Information • The Submenu items for the SMS report / voice mail incoming notification display screen are “Move to folder”, “Delete,” and “Protect ON/OFF” only. Distributing the received mail to the folder automatically 1. On the Received Mail Folder List screen (P129), select a folder to specify conditions ] M [Menu] ] Auto Sort • The screen for automatic sort is displayed. 2. M [Menu] ] Select sub-menu. Address 1 2 You can enter e-mail address or phone number to distribute each folder. – Open phonebook: You can input the phone number in phonebook. 1 : You cannot set the multiple conditions in same folder. 2 : If the received mail is under multiple conditions, the setting of “Address” is preferred. Receiving i-mode Mail/SMS Messages Automatically Mail The mail or SMS is applicable for the condition can be saved the folder automatically. You can set this only to additional folder. – Input address: You can input the address. When you enter e-mail address, you input correctly to a domain (the part of after @ mark). Subject 1 2 You can input the subject of mail to distribute a folder. Release You can cancel one of conditions of distribution of folder. Release all You can cancel all conditions. When the FOMA phone is in the service area, it automatically receives i-mode mail/ SMS messages. 1. Mail or an SMS message is received • (White) or (White) is displayed. 2. The result of the reception is displayed • If you want to check the received i-mode mail message immediately, select “i-mode mail”, and then press C. • If you want to check the received SMS message immediately, press C • Q: Go to previous screen. 133 Mail Saving Images over 10000 bytes A JPEG image over 10000 bytes is not downloaded properly to the FOMA handset. Therefore, you can save it after extracting the data from URL for image view in mail text, and connecting i-shot center. 1. On the Received Mail Folder List screen (P129), select “URL” ] C ] “Yes” • For the method saving images, see “Obtaining Images from Sites” (P124). Information • You can view the contents of received Deco-mail by this way. • Play: You can play downloaded i-motion. • File property: You can view information of downloaded imotion from a site. • Back: The site will be returned, not saving i-motion. Displaying Mail in Outbox C] ]2 The Sent Mail List is displayed. You can check the records and contents of sent i-mode mail and SMS messages. 1. From the Mail menu (P127), select “Outbox”. Outbox The time to send the mailŦ1 ReceiverŦ2 SubjectŦ3 Downloading i-motion Movies from i-motion Mail Mail Data of i-motion mail is not downloaded to the FOMA phone even when it is received. You need to access the i-motion mail Center from its URL given to the mail text to see an imotion movie to download and save the data. The saved imotion can be checked in “i-motion” of “Data box” > “i-mode” folder (P161). 1. From the Received Mail Folder List screen (P129), select the URL ] C ] I “Yes” • You can start to download i-motion. • When downloading, you can play a few i-motions at the same time. 2. After downloading, press Q • Save: You can save the downloaded i-motion. 134 docomo. taro docomo. jiro docomo. saburo Menu Select Ŧ1: The mail you receive is displayed on a time basis that day. From the next day on, each message is displayed by the date when you received it. Ŧ2: The name is displayed when the entry is saved in phonebook. Ŧ3: SMS is displayed as SMS • J/F, E: If there are multiple pages, the previous or next page is displayed. Mail 2. Select a mail ] C Menu Icon ReceiverŦ Protected mail/ SMS messages The time to send the mailŦ SubjectŦ Mail with a file attached Ŧ: The menus are displayed same as Ŧ2 ~ Ŧ3 of screen in the list of received mail. Select • J: Display the previous or next page. • FE: Scroll by screen. Information Icons on the Sent Mail List display and the Sent Mail display screen Mail with an attached file to which UIM restrictions are set Subject Mail address successfully sent as To-type mail Mail address failed to be sent as To-type mail Mail address successfully sent as Cc-type mail Mail • To display the box which is set “Security” (P145), press C > Enter terminal security code > C [Done]. • You can save mail/SMS the maximum up to 400. Depending on the size of mail/SMS, the number of mail/SMS to save can be reduced. Icon Description Sent SMS messages in the UIM Mail address failed to be sent as Cc-type mail Mail address successfully sent as Bcc-type mail Mail address failed to be sent as Bcctype mail Sent date and time Description Mail successfully sent An image is attached. Mail failed to be sent Moving images are attached. A melody is attached. SMS message successfully sent SMS message failed to be sent 135 Mail Information • When sending an SMS message, the first part of the text is displayed in the subject field of the list screen. Using the Submenu of the Sent Mail List Screen Setting item/Setting at purchase > P244 1. From the Sent Mail Folder List screen (P135), M [Menu] ] Select from the following Submenu items Mail Edit You can edit the selected mail again. See “Composing i-mode mail” (P139) / “Composing SMS messages” (P141). Delete You can delete the selected mail. Delete selected You can select and delete multiple mail messages. After selecting mail messages, M [Menu] > Select “Delete”. Delete all You can delete all mail messages in the folder. To delete all, C > Enter terminal security code > C [Done]. Protect ON/OFF 1 You can set or cancel the protection to the selected mail. Protected mail cannot be deleted. Sort You can sort the mail messages displayed in the list screen. 136 Filter You can change the type of the mail messages displayed in the list display. UIM 2 You can move and copy the selected SMS message to the UIM, and move and copy the SMS messages in the UIM to the FOMA phone. 1 : You cannot use this menu of SMS in the UIM. 2 : You cannot use this menu in i-mode mail or SMS delivery report. Using the Submenu of the Sent Mail Display Screen 1. From the Sent Mail Display screen (P134), M [Menu] ] Select from the following Submenu items Edit You can edit the displayed mail again. Go to step 2 in “Composing i-mode mail” (P139) /“Composing SMS messages” (P141). Delete You can delete the displayed mail. Protect ON/OFF 1 You can set or cancel the protection to the displayed mail. The protected mail messages cannot be deleted. Store address You can register mail address/phone number of receiver on displaying the mail. Go to step 2 on page 58 of “Adding to Phonebook”. Mail Add to phonebook 2 You can add the mail address and phone number of the sender of the displayed mail to the phonebook. Go to step 2 (P58) of “Adding to Phone Book”. Copy 3 • After selecting the item, see “Copying/Cutting/ Pasting” (P209). – Body: You can copy the text. – Subject: You can copy the subject. UIM 4 You can move and copy the displayed SMS message to the UIM, and move and copy the SMS messages in the UIM to the FOMA phone. Unsent message DoCoMo Ichiro The time to saveŦ1 ReceiverŦ2 SubjectŦ3 Ŧ1: The mail you save is displayed on a time basis that day. From the next day on, each message is displayed by the date when you saved it. Menu Select Ŧ2: The name is displayed when the entry is saved in phonebook. Ŧ3: SMS is displayed as “SMS” • J/FE: Displays the previous and next page in case of being many pages. 2. Select a mail ] C Compose message Mail 1: This function is not available in SMS of FOMA card. 2: After select the mail address/ phone number, you can activate the function. Otherwise, you cannot activate the menu properly. 3: This function is not available for of the SMS. 4: This function is not available for the protected SMS. 1. From the Mail menu (P127), “Unsent message” 1Kbyte 0Kbyte Displaying Mail in Unsent message C] ]3 The Unsent message List is displayed. You can check the contents of saved i-mode mail and SMS messages which have not been yet sent. Menu Select Send Information • To display the box which is set “Security” (P145), press C > Enter terminal security code > C [Done]. • You can save mail/ SMS the maximum up to 400. Depending on the size of mail/ SMS, the number of mail/SMS to save can be reduced. 137 Mail Icons on the Unsent Mail List display and the Unsent Mail display screen Icon Description Unsent mail Unsent SMS message Mail with a file attached Mail with an attached file to which UIM restrictions are set Subject Address of To-type Address of Cc-type Address of Bcc-type Mail Attached file A pasted melody file is attached. i-appli launch information is pasted. A melody file is pasted. An image file is attached. A moving image file is attached. A damaged melody file is attached. A damaged file is pasted. Text Using the Submenu of the Unsent Message List Screen Setting item/Setting at purchase > P245 1. From the Unsent Message List screen (P137), M [Menu] ] Select from the following submenu items Send You can send the selected mail. Delete You can delete the selected mail. Delete selected You can select and delete multiple mail messages. After selecting mail messages, M [Menu]. > Select “Delete”. Delete all You can delete all mail messages in the folder. To delete all, C > Enter terminal security code > C [Done]. Sort You can sort the mail messages displayed in the list display. Filter You can change the type of the mail messages displayed on the list display. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 138 Y Mail Using the Submenu of the Unsent Mail Display Screen From the Unsent Message List screen (P137), press M [Menu] and select a submenu item. See “Using the Submenu of the Compose Mail display” (P142)/“Using the Submenu of the Compose SMS Screen” (P142) for the available submenu items. C] ]41 file • Select the file saved “My picture” of Data box” (P154) / “Melody”(P164) . Select the Message field ] C ] Enter message ] C Compose message 0Kbyte 0Kbyte Send Select the Address field ] C ] Enter the address ] C Information • Depending on the radio wave conditions, the characters might not be sent successfully to the destination. • You register “Phone number XXXX” or “Phone number XXXX@docomo.ne.jp” (XXXX: Security code) when you add the mail address including of security code of four digits. For details, refer to “i-mode User's manual”. • When half-pitch katakana and pictographs are used for mail except for when exchanging mail between i-mode phones. They might not be displayed correctly. Using the Submenu of the Compose Mail Display 1. From the Compose Mail display (See left) M [Menu] ] Select from the following Submenu items Next Page 139 Mail You can create and send new i-mode mail. 1. From the Mail menu (P127), select “Compose Mail” ] “Compose message” 2. Select (Attach file) item ] C ] Add attached 4. 6. I [Send] Composing i-mode Mail Select Select the Subject field ] C ] Enter the subject ] C • In case of not attaching the file, Go to step 5. 5. Composing Mail Menu 3. Mail Mail Send You can send the i-mode mail that you are composing or editing. Save You can save the i-mode mail that you are composing or editing in unsent message. Add address You can add addresses. You can specify multiple addresses to send same i-mode mail to multiple recipients at the same time. You can send same mail to up to five addresses at a time. – Open phonebook: You can add the address by searching the phonebook. – Input address: You can input the address directly. Address menu 1 – Open phonebook: You can add the address by searching the phonebook. – Input address: You can input the address directly. – Change to To: You can change the setting of receiver to T " o". – Change to Cc: You can change the setting of receiver to C " c". – Change to Bcc: You can change the setting of receiver to B " cc". – Delete address: You can delete the address. Attach file menu – Attach file: You can select the file in “My picture” (P154) / “i-motion” (P161) / “Melody” (P164) of “Data box”. – Delete att. file 2: You can delete the attachment file. 140 – Play/ Display file 2: You can play or view the file. Add signature You can insert a signature at the end of the text of mail. • You need to register the signature beforehand. > p145 Delete body You can delete the i-mode mail that you are composing or editing. Delete mail You can delete the mail on composing or editing. 1 : After selecting 2 : After selecting , you can operate the menu. , you can operate the menu. Information • The type or receiver – To: Stands for the usual receiver – Cc: You select Cc to inform the contents except for direct receiver. – Bcc: You select Bcc to inform the contents if you don't want to be known to other receivers except for direct receiver. • About attachable files Type of file Maximum number of files Melody Image of 10,000 bytes Up to 10 files or less (JPEG, GIF) Image over 10,000 bytes (JPEG) Moving image/ i-motion movie 1 file Mail 1 : Up to 10 files when the total size of a data file including melodies and images is equivalent of 5,000 full-pitch characters (i.e., 10,000 bytes). 2 : You can attach either an image or moving image/ i-motion movie of up to 10 Kbytes. You can attach the file separately from melody files and images of 10,000 bytes or less. C] You can create and send SMS messages. You can send and receive SMS messages to and from the subscribers to overseas carriers in addition to DoCoMo. For information on the countries and overseas carriers with which SMS messages can be exchanged, see DoCoMo’s web site. 1. From the Mail menu (P127), select “Compose Mail” ] “Compose SMS” Compose SMS Menu Using the Submenu of the Creating next Entry Screen From creating next Entry screen press M [Menu] and select a Submenu item. See “Using the Submenu of Character Entry display” (P208) for the available Submenu items. ]42 Mail • You cannot attach files that are prohibited from being attached to mail or output from the FOMA phone to other devices. • When a JPEG image or an i-motion movie in excess of 10,000 bytes is attached, the number of characters you can enter in the text field decreases by the equivalent of 100 full-pitch characters (200 half-pitch characters). • The i-mode phone of the mova service cannot receive GIF images and melodies. • Some attached files might be deleted at the i-mode Center or not be received, displayed, or played properly by the recipients. Composing SMS messages Select Send 2. Select the Address field ] C ] Enter the recipient’s phone number ] C 3. Select the Message field ] C ] Enter the message ] C 4. I [Send] 141 Mail If the recipient is a subscriber to an overseas carrier other than DoCoMo: “+” (Press key two times) ] “Country code” ] “Mobile phone number of the recipient” • If the mobile phone number starts with 0, enter the number by omitting “0”. Information Mail • Depending on the radio wave conditions, the characters might not be sent successfully to the destination. • When you send an SMS message to a subscriber to an overseas carrier, if characters that the other party does not support are included in its text, they might not be displayed correctly. • If the receiver has i-mode phone of mova service, it may be received SMS from FOMA phone as i-mode mail. • You cannot replay to an SMS message from a concealed number / payphone/number with notification not supported. • If the full-pitch characters are entered over 70 digits, some of then can be deleted. Using the Submenu of the Compose SMS Display 1. From the Compose SMS display (P141), M [Menu] ] Select from the following Submenu items Send You can send an SMS message that you are composing or editing. 142 Save You can save an SMS message that you are composing or editing in Draft box. Address menu – Open phonebook: You can add the address by searching the phonebook. – Input address: You can input the address directly. SMS report request You can set whether to request a report for the SMS message that you are composing. An SMS report is an SMS message to notify you when your SMS message reaches the recipient. SMS validity term You can set the period during which the SMS Center keeps the SMS message that you are composing or editing when the recipient cannot receive it immediately. Delete body You can delete a sentence inputting in text. The phone number of receiver will not be deleted. Delete SMS You can delete the SMS message that you are composing or editing. Mail Using the Submenu of the Compose SMS Display From the Compose SMS display, press M [Menu] and select a submenu item. See “Using the Submenu of the Character Entry display” (P208) for the available Submenu items. Checking New i-mode mail and Message C] ]5 When your FOMA phone has been off or out of the service area, you can check whether or not the i-mode Center holds i-mode mail and messageR/F. Information • When the i-mode Center holds i-mode mail and messageR/F, the relevant icon (P31) is displayed. When mail or messages arrive at the Center when, for instance, your FOMA phone is off, the icon might not be displayed. • Even when “Receive option” is set to “ON,” you will still receive all mail messages held at the Center if you use “Check new message.” If you do not want to receive all mail messages, unmark “Mail” from the “Check new message” (P144). C] ]6 You can check the subject of i-mode mail held at the imode Center and select mail to receive, or delete mail at the Center before receiving it. To use this function, you need to set “Receive option” (P144) to “ON” beforehand. 1. From the Mail menu (P127), “Receive option” • The phone is connected to the Center, and the display for selecting mail to receive is displayed. 2. Select the pull-down menu for each mail ] C ] Select “Receive”, “Delete” or “Hold” ] C 3. Select “Receive/Delete” ] C • The confirmation window is displayed. Mail 1. From the Stand-by screen, press M for at least two seconds • The Check results display appears. To read the received i-mode mail immediately, select “Mail” and press C. Receiving Selected Mail 4. Select “OK” ] C • In step 2, the mail messages for which “Receive” was selected are received immediately. Information • See “i-mode User’s Manual” for other operating methods in addition to the aforementioned one and the icons in the display 143 Mail Checking whether Center Holds SMS C] ]7 When your FOMA phone has been off or out of the service area, you can check whether or not the SMS Center holds SMS messages. 1. From the Mail menu (P127), “Check new SMS” • The Check results display appears. To read the received SMS messages immediately, select SMS and press C. Changing Mail Setting Mail Communication C] ]81 You can change the settings related to communication of mail and SMS messages. Setting items/Setting at purchase > P228 1. From the Mail menu (P127), “Mail setting” ] “Communication” ] Select from the following setting items ] After setting, I [Done] Receive opt. setting You can set whether to select i-mode mail to receive. If this function is set to “ON,” you cannot receive imode mail automatically. 144 Receive attach file You can set whether to receive images or melodies attached to i-mode mail. Check new message When you receive messages by conducting “Check New Message,” you can select an item to check from i-mode mail, messageR, and messageF. SMS report request You can set whether to request an SMS report when sending an SMS message. The SMS report notifies you when your SMS message is delivered to the destination. SMS validity term You can set the period of time that SMS messages are held at the SMS Center when the recipient cannot receive the messages. Information • The attachment file is set cannot be received because the file is deleted from i-mode center. • You can receive the melody of MFi format to attach to the body of mail when you set the attachment Mail Edit C] ]82 You can make the settings related to a signature to be attached to the mail text and quotation mark for when replying to mail. Setting items/Setting at purchase > P228, P229 1. From the Mail menu (P127), “Mail setting” ] “Edit” ] Select from the following setting items ] After setting, I [Done] View C] ]83 You can make the settings related to the display of mail and SMS messages. Character size You can set the character size of the text on the Mail display screen. Scroll You can set the number of lines to scroll when pressing H on the Mail display screen. (1 line/ 3 lines/ 5 lines) Mail list display You can set the display method (the number of lines/the contents displayed) on the mail list display. Folder security You can set security to Inbox, Sent box, and Draft box in the Mail menu. To display the messages in the box with security set, C > Enter terminal security code > C [Done]. Melody auto play You can set whether to automatically play a melody attached or pasted on the mail display screen. Pasted data You can set whether to activate a melody or an i-appli to data pasted to the received mail text. Mail Edit signature You can set whether to automatically attach your name and address (signature) at the end of the text and can set the text of a signature. Edit quotation You can set symbols or sentences to be attached to the head of the original text (quotation mark) for “Reply quoted”. 1. From the Mail menu (P127), “Mail setting” ] “View” ] Select from the following setting items ] After setting, I [Done] Setting items/Setting at purchase > P229 145 Mail Others C] ]84 You can check the settings made in “Mail setting” and reset the settings to the default. 1. From the Mail menu (P127), “Mail setting” ] “Others” ] Select from the following setting items. Mail Check settings You can check the settings made in the “Mail settings”. Reset settings You can reset the settings made in the “Mail settings” to the default. To reset settings, C > Enter terminal security code > C [Done]. Reset data You can delete all mail messages and MessageR/F stored in the FOMA phone. To reset the datal, C > Enter terminal security code > C [Done]. 146 i-appli Software list āāࣻࣻɁຢɈൌഀ i-appli Select What is i-appli.......................................148 Menu Select To display the Software List Downloading i-appli from Sites ...........148 On the Stand-by display, Starting i-appli ......................................149 C [Menu] ] or “i-appli” 147 i-appli What is i-appli By downloading various software programs on sites and saving them into the FOMA phone, you can automatically update the stock prices, weather information, etc. and enjoy games even without connecting to the network. • Refer to “i-mode User’s Manual” for details. • This model does not support all the services described in “i-mode User’s Manual”. Check which models support which services in “i-mode User’s Manual”. Downloading i-appli from Sites Download the software from Sites and start the FOMA phone. i-appli 1. Display a site that supports downloading of i-appli ] Select an item that enables you to download the software ] C 2. After the download is finished, C • After the download is finished, the communication setup display may appear. After setting, press I [Done]. • Some software may start right after it is downloaded. In that case, the software may not have been saved. When ending the software, the confirmation display may appear asking whether to save it. Select “Yes” to save it. 148 3. “Yes”/“No” • Yes: Activates i-appli. • No: the Site display returns. Information • Downloading is not available at some accessed sites. • At downloading software, the confirmation display might appear asking whether to use the “serial number of your mobile phone/UIM”. Select “Yes” to start downloading. In this case, the “serial number of your mobile phone/UIM” is sent to the IP (Information Service Provider) over the Internet, so could be deciphered by third parties. However, your phone number, address, age and gender are not notified to the IP (Information Service Provider) or others by this operation. i-appli • Each mark will be displayed thinly when downloading by other FOMA card or version- up of i-appli (Restriction on FOMA card). Starting i-appli C] 1. Press and hold I for at least one second from the Stand-by display. Information • Some software communicates after downloaded. You can let it not communicate by the i-appli setting. Software list āāࣻࣻɁຢɈൌഀ Using the Submenu of the Software List Setting item/Setting at purchase > P245 • Some submenus may not be able to be set up depending on the software. Menu 1. From the Software List (See left), M [Menu] ] Select from the following Submenu items Select Icons on the Software List Icons (Blue) Description The folder you composed Normal i-appli i-appli downloaded from SSL site i-appli that Auto start is set to Create folder You can create a folder. Delete folder You can delete the folder selected. You cannot delete a folder in which software is saved. Rename folder You can edit the name of the folder selected. Move to folder You can move the folder selected to another folder you composed. Upgrade You can upgrade the version of the software selected. Delete You can delete the software selected. Next Page 149 i-appli 2. Select the software to be launched ] C • P: End the activation of i-appli. i-appli i-appli Delete selected You can select and delete multiple pieces of software. After selecting, M [Menu]. > Select “Delete”. Delete all You can delete all softwares in i-appli. To delete all, C > Enter terminal security code > C [Done]. Sort You can sort software. Properties You can check the name, size, etc. of the software selected. Certificate You can check the owner, issuer, expiration date, etc. of the certificate used for the software selected. Network setting You can set whether to communicate while the software selected is being started. I [Done]. i-appli To You can set whether to start the software selected from a site or mail. After setting, press I [Done]. Icon info setting You can set whether icon information for i-mode mail, SMS, messageR/F, battery level, Manner Mode, radio wave strength and being out of area is to be used by the software selected. After setting, press I [Done]. 150 Autostart setting You can set to activate the selected software automatically. If you set “Yes” after selecting “Edit”, you enter the method for activation and the time. After setting, press I [Done]. Show desc setting You can set whether to display software information at i-appli downloading. After setting, press I [Done]. Autostart failure You can check information when i-appli fails to start automatically. Trace info You can check information when i-appli supporting the trace function has been terminated due to an error. System info You can check system information such as memory usage status of i-appli. : You cannot use the folder you composed. Information • In “Show desc setting”, the setting value of this menu is not reset by “Settings” > “Others” > “Reset settings” > “Default settings”. i-appli Information • Note that you might not be able to receive timely information if you have set “Network Setting” to “OFF”. • When “Upgrade” of the software, the confirmation display may appear asking whether to use the “serial number of your mobile phone / UIM”. If you select “Yes”, version upgrade starts. In this case, your “mobile phone number / serial number of UIM” is sent to the IP (Information Service Provider) over the Internet, so could be deciphered by third parties. However, your phone number, address, age, and gender are not notified to the IP (Information Service Provider) or others by this operation. Pre-installed i-appli This game is to remove the blocks when putting the block has a same result after multiplying the serial number. (Brain teaser by multiplication matrix) Start 1 Starts the game. Stage 1 You can select the stage (01~ 10) by pressing J Continue You can start the game on pause. Key info You can view the information of each button. After displaying, when you press I [Menu], the menu is returned back. Help You can view the information to remove the block. After displaying, when you press J, you can change the screen. If you press I [Menu], you can return to menu. Rank You can view the status of score rank. After displaying, you can return back to menu by pressing I [Menu]. Sound You can set the sound of game. When you press C, you can turn on or off sound. 1 : On pause the game, you cannot see these menus. 2 : On pause the game, you can see these menus. Next page 151 i-appli • If “Icon Info set” is set to “Use”, icon information for i-mode mail, SMS, messageR/F, battery level, Manner mode, radio wave strength and being out of area may be sent to the IP (Information Service Provider) over the Internet just like your “mobile phone number / serial number of UIM”, so could be deciphered by third parties. However, your phone number, address, age, and gender are not notified to the IP (Information Provider) or others by this operation. 1. From the screen of software list (P149), select “ ” ] C ] Select the following menu • I [Q uit]: You can end a game. i-appli • In case the result after multiplying is two digits a, you can paste the block beside same to the last number. • See “Help” (P151), for the block except for number. Screen on game Indicates next block. If you remove the block, the number will be reduced. If the number is 0, the stage will be clear. Indicates the current stage. Pause Menu If the rest of block are done, the block will be dropped beside 1 line. • M[Pause]/[Resume]: You can pause the game. If you press it again, you can start it again. • I[Menu]: After stopping the game, the menu will be displayed. Button activation on game Go to Key info (P151) of menu for details. i-appli Deleting the block You can delete the falling blocks if you meet the condition. When the blocks are full from 4th line to 7th line on left, the game is over. < Combining the block of number 224> Vertical direction Ŀ Ł 152 Horizontal direction All 3 blocks will be removed. Ŀ Ł Game over The screen of game over is displayed. If you press C, you can view the score by displaying rank screen. If you press I[Menu], you can return back to menu. Information • When you close the flip on game. the game is continuous. Data box Data box Data box My picture i-motion Melody miniSD memory card Select Select Introduction of Data box......................154 Displaying/Managing/ Editing Images......................................154 Playing back/Managing/ Editing Moving Images/i-motion .........161 To display the Data box menu On the Stand-by display, C[Menu] ] or “Data box” Playing back/Managing/ Editing Melody......................................163 Caution on Use of the miniSD Memory Card........................................166 Inserting/removing miniSD memory card ........................................167 Playing back/Editing Data on the miniSD Memory Card.....................168 Playing back i-motion (including of music file) downloaded by other devices in FOMA phone.......................169 153 Data box Introduction of Data box Data box has the following items and folders: Menu item My picture Data box i-motion Folder Contents Data transfer Melodies obtained through data transmission, etc. Melody : Folders added by the user are not included. Menu item Folder Contents Camera Shot still images, etc. i-mode Melodies obtained from sites, etc. Pre-installed Pre-installed melodies Data transfer Still images obtained through data transmission, etc. miniSD memory My picture card The folder structure and the files saved in the folder are the same as those of the FOMA phone (above). i-mode Still images obtained from sites, etc. i-motion Item Still images usable for frames and elements Melody Pre-installed Pre-installed still images Camera Shot moving images by video camera etc. Data transfer Moving images obtained through data transmission, etc. i-mode i-motion obtained from sites, etc. File format Pixel/File size JPEG, GIF Pre-installed moving images Extension name Pre-installed jpg, gif Displaying/Managing/Editing Images C] ]1 You can display the shot still images, or still images obtained from sites or i-mode mail. The File Format To Display • This FOMA phone supports to display file format as follow. Under 1280x1024 dots/Under 500Kbyte : Some files cannot be played depending on the file format. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 154 Y Data box 3. Select a file ] C Displaying Images 1. From Data box menu (P153), “My picture” File name My picture [1/5] Folder name being selected Camera Menu Open 5 Files Switch Number of files in the folder being selected • I [View by] : You can select Simple list or Detailed list depending on listing folder type. 2. Select a folder ] C Camera [1/11] Menu Full Mail • C [Full] : The image will be displayed fully. • I [Mail] : You can send i-mode mail with attaching the selected file. Go to step 2 on page 139 of “Composing message”. • J: Displays the previous/ next file. The mark on the image file list Description Data box Mark Previous folder Go to My picture Menu Open Switch File name and File size being selected (in case of files being selected The file set the limitation • I [Mail] : You can send i-mode mail with attaching an image file. Go to step 2 on page 139 of “Composing message”. Not recognized the file : The item is protected from sending the file except this FOMA handset. You cannot edit the file or copy it from miniSD memory card. 155 Data box Using the Submenu of the Folder List Setting item/Setting at purchase > P246 1. From the Folder List (P155), M [Menu] ] Select from the following Submenu items Data box Open You can open the folder selected. New folder 1 You can create a folder. Delete 1 2 You can delete the folders selected. Sort by You can sort the folders. View by You can change folder display methods. Memory info. You can check status of the storage area on the FOMA phone / miniSD memory card, etc. Folder property You can check the name, size and the number of the files in the folder of the folder selected. 1: You cannot use this menu “My picture”, “i-motion”, “Melody” in miniSD memory card. 2: You cannot use this menu in pre-installed folder. Information If you delete the melody set as ring tone, alarm, or schedule, each one can be returned to pre-installed setting. Using the Submenu of the Image File List Display Setting item/Setting at purchase > P246 1. From the Image File List screen (P155), Select a file ] M [Menu] ] Select from the following Submenu items New folder 1 You can create a folder. Files 1 – View : You can display the file selected. – Edit 2 4 : You can edit the file selected. >P159 You can edit only JPEG file. – Move 3 : You can move the selected file to other folder. “Handset memory”/“miniSD memory card” > Select the folder C > I [Paste]. – Copy 3 : You can copy the selected file to other folder. “Handset memory”/“miniSD memory card” > Select the folder C > I [Paste]. – Delete : You can delete the file selected. – Delete all : You can delete all the files in the folder. You need to enter your terminal security code for deleting. – Rename : You can change the name of the file selected. • If you delete each image which set as a wallpaper in stand-by mode, phonebook, or video-phone call, each one can be returned to pre-installed setting. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 156 Y Data box View by You can change file display methods. Memory info. You can check status of the storage area on the FOMA phone / miniSD memory card, etc. File property You can check the name, size and type, date and time, resolution, file restriction of the selected file. 1: You cannot use this menu in “Item”, “Pre-installed” folder. 2: When you have JPEG file (Except for not protection file), you can use this menu. 3: You cannot move and copy this menu in “Item”, “Pre-installed” folder. 4: You cannot use this menu in protection file. 5: You cannot use this menu in image saved in miniSD memory card. Information • If you delete the image set in stand-by mode, phonebook, or video-phone, each image will be returned to the setting at purchase. Data box Mark/Unmark 1 You can move, copy, and delete after selecting multiple files. After selecting, press M [Menu] > “File” > Select “Move”/“Copy”/“Delete” – Mark : You can select a file at a time. – Mark all : You can select all the files collectively. – Unmark : You can deselect the file selected by “Mark” or one of the files selected by “Unmark all” at a time. – Unmark all : You can deselect the file selected by “Mark” or all the files selected by “Unmark all”. Send via mail 1 4 You can attach a file to i-mode mail for sending. Go to step 2 (P139) of “Compose i-mode mail ”. Set as wallpaper 5 Select the “Main display” or “Sub display” and set as wall paper for the Stand-by display, etc. Slide show – Go : Files in the folder are displayed in order. – Settings : You can set the “view as” and “Time interval (secs)”. After setting, press I [Done]. Make animated GIF 1 4 5 You can select up to 10 files to create animation. After the files, press I [Make]. Sort by You can sort files. 157 Data box Using the Submenu of the Image Display Setting items/Setting at purchase > P246 1. From the Image display (P155), M [Menu] ] Select from the following Submenu itemsM Data box Files 1 – Delete : You can delete the file displayed. – Rename : You can change the name of the file displayed. – Edit 2 : You can edit the file displayed. >P159 Send via mail 1 3 You can attach a file to i-mode mail for sending. Go to step 2 of “Compose i-mode mail” (P139). Full You can bring up an image on the full display hiding the soft keys and display information. • J: The previous image/next image is displayed. • Q: The full display is cancelled. Zoom Displays an image in a large size. • M : Every time you press M, the displayed image is enlarged. • I : The image is displayed in the previous size. • K : You can move the position of display of the expanded image. • Q : The zoom is cancelled. 158 Set as wallpaper 4 Select the “Main display” or “Sub display” to set as wallpaper for the Stand-by display. Slide show – Go : Files in the folder are displayed in order. – Settings : You can set the “View as” and “Time interval (secs)” for the slide show. After the setting, press I [Done]. Go to list The list screen reappears. (P155) File property You can check the name, size, and type , date and time, resolution, file restriction of the selected file. 1: You cannot use this menu in “Item”, “Pre-installed” folder. 2: When you have JPEG file (Except for not protection file), you can use this menu. 3: You cannot use this menu in protection file. 4: The image in miniSD memory can be disabled. Information • If you delete each image which set as a wallpaper in stand-by mode, phonebook, or video-phone call, each one can be returned to pre-installed setting. • If the image in miniSD memory card, you cannot set it as a wallpaper. Data box Editing Still Images You can edit a still image. The edited still image is saved into the folder containing the original still image. There are some cases where you may not be able to edit. Setting items/Setting at purchase > P246 1. From the Image File List (P155) Display (P155), Select a file, from the Image Display screen, Press M [Menu] ] “Files” ] “Edit” • The screen to edit the image is displayed. 2. From the Edit display, M[Menu] ] Select from the following editing methods ] After setting, C [Save] • After editing in screen, you can operate the function as follow. – M[Menu]: Displays the menu to edit. – I[Undo]: Returns back to previous menu 1) Select a text box ] C 2) Enter text ] C • M[Text]: You can change the text box. • I[Cancel]: Returns back to previous menu. 3) C ] Select a position of the text using K ] – Frame : A frame is added to a still image. Select a frame to set up. 1) ]C • M[Rotate]: You can rotate a still image 180 degrees to the left or to the right. • I[Cancel]: You can cancel editing. 2) Press C • I[Cancel]: You can cancel editing. 2) Press C Next Page 159 Data box Save You can save the edited still image. Rotate You can rotate a still image 90 degrees to the left or to the right. 1) Left side / Right side • M[Rotate]: You can rotate a still image 90 degrees to the left or to the right. Resizing You can change the size of a still image. Insert – Text : You can paste a text to a still image. • If you press M [Menu], you can change the settings of “Font size” and “Font color”. Data box – Element : An element is pasted to a still image. • If you press M[Menu], you can select a size of the element from “Large”, “Medium” and “Small”. 1) Select an element ] C 2) Select a position to paste the stamp by K ] • If you continue to add same element, repeat step 2. • M[More]: You can select each element. 3) I[Done] Data box Clipping 1) Select the size for trimming. ] C • The range for trimming is marked in red line. 2) Select the position for trimming by pressing K]C • If you select User defined size, you can adjust the coverage for trimming of each picture. You can move the red cursor by pressing K, and then set the starting and ending point for trimming by pressing C. Effect – Black & White : Makes the color tone black and white. – Sepia : Makes the color tone sepia. – Negative : Reverses the color tone. – Black & White negative : Makes the color tone black and white and reverses black and white. – Color balance : Emphasizes or weakens light and shade of colors such as red, green, blue. – Contrast : Emphasizes or weakens contrast. – Sharpness : Emphasizes the contour. – Softness : Gradates the contour. – Mosaic Blur : Applies the mosaic. Moves to red line by pressing K, and then set the starting and ending point to apply the mosaic by pressing C. Mirror Reverse the image horizontally. Undo Undoes the edited file. This menu is not displayed if you select the file before being edited. Information • You can “Resizing” only to make it smaller than the original still image. You may not be able to change the size depending on the display size of the original image. • If a screen proportion of the size selected by “Resize” and is different with the other size of still image, it can be saved by other size, not selected one. • In the size “1280 x 1024” of still image, you cannot set “Insert” and “Effect”. • The size for setting “Frame” is “352 x 288”, “320 x 240” “176 x 220”, “176 x 144”, “128 x 96”. You cannot set the other size to “Frame”. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 160 Y Data box • You cannot specify a display size larger than the original still image to “Trimming”. • The text box, Frame image, element at purchase, refer to “Text box” (P251), “Frame” (P250), “Element” (P251) of “Appendix”. • When the image size is over VGA(640X480), you cannot use the function such as insert, effect, clipping. • If aspect ratio for resizing of image is different with the ratio of selected image, the image can be resized differing with the size you want. Playing back/Managing/ Editing Moving Images/i-motion C] ]2 You can play back moving images shot by the camera, or moving images obtained from sites, or from i-mode mail. Playing back Moving Images / i-motion 1. From the Data box menu (P153), “i-motion” i-motion [1 / 4] The folder name on selecting Camera Menu Open 5 File Switch The number of file in folder • I [Switch] : You can change the type of display of folder. 2. Select a folder ] C • See step 2 “Display screen” (P155) for the mark on display screen. Camera [1/8] Playable file format Data box FOMA handset can play the file as follow. File format Code system MP4 MP4 file Image MPEG4, H.263, Voice AAC, AMR Extension name MP4, 3gp • You cannot a few files depending on file format being compatible with a phone. Voice file Go to i-motion Menu Open Switch The name of file, the file size (When selecting a file) • I [Mail] : You can send i-mode mail with attaching the selected file. Go to step 2 on page 139 “Composing message”. Next Page 161 Data box 3. Select a file ] C Using the Submenu of the Moving Image File List Setting item/Setting at purchase > P247 Volume Playback bar Playback elapsed time / maximum playback time Stereo / monaural Menu Pause Stop • C/G[Plays back]: Pauses • I[Stop]: Stops • J: Plays back the previous file / next file • J(Press and hold): The images are fast forwarded / fast rewound while it is pressed • H, FE: Adjust volume Data box Using the Submenu of the Folder List See “Using the Submenu of the Folder List” of images (P155) for the submenus available. 162 1. From the Moving Image File List (P161), Select a file ] M [Menu] ] Select from the following Submenu items Play Plays back the file selected. New folder 1 You can create a folder. Files 1 – Move 2 : You can move the file selected to another folder. “Handset memory”/“miniSD memory card” > Select a folder to move > C > I [Paste]. – Copy 2 : You can copy the file selected to another folder. “Handset memory”/“miniSD memory card” > Select a folder to move > C > I [Paste]. – Delete : You can delete the file selected. – Delete all : You can delete all files in the folder. If you delete all files, you enter a phone password. – Rename : You can change the name of the file selected. Mark/Unmark 1 You can mark or unmark files. If you select this menu, you can move, copy and delete multiple files. After selecting , M [Menu] > “File” > Select “Move”/“Copy”/ “Delete”. Data box 1: You cannot use the file in “Pre-installed” folder. 2: You cannot move or copy the file in “Pre-installed” folder. Also, you cannot move or copy the restriction file to miniSD memory card. 3: You cannot use this menu in restriction file. Using the Submenu of the Moving Image Playback Screen As for MP4 file, only voice, not recording the image, see “Using the Submenu of the Melody Playback” (P166). Setting item/Setting at purchase > P247 1. From the Moving Image Playback display (P162), M[Menu] ] Select from the following Submenu items Pause 3 (Play 5) You can pause the moving images being played back. Send via mail 1 2 You can compose a message and attach it to i-mode mail for sending. Go to step 2 (P139) of “Composing imode message”. Expand 3 You can view the whole moving image without displaying the indication of soft key or player. • Q: cancel this function. Snap 1 2 4 You can save paused moving images as still images. Snapped images are saved into the “Camera” folder of “My picture”. Mute (Unmute) You can play back moving images muting the sound. Data box – Mark 2 : You can select a file at a time. – Mark all : You can select all the files collectively. – Unmark : You can deselect the file selected by “Mark” or one of the files selected by “Mark all” at a time. – Unmark all : You can deselect the file selected by “Mark” or all the files selected by “Mark all”. Send via mail 1 3 You can attach a file to i-mode mail for sending. Go to step 2 (P139) of “Compose i-mode mail”. Sort by You can sort files. View by You can change file display methods. Memory info. You can check the status of the storage area on the FOMA phone / miniSD memory card, etc. File property You can check the name, size, and type, date and time, resolution, file restriction of the selected file. 163 Data box Player settings You can change settings of the visual effect and the color tone of the player. File property You can display the name, size, and type of the file selected. 1: You cannot use this menu in “Pre-installed” menu. 2: You cannot use this menu in restriction file. 3: You can use this menu on playing the file. 4: You can use this menu on pause. 5: You can use this menu after pausing or ending to play back the file. Playing back/Managing/Editing Melody C] ]3 You can play back pre-installed melodies, and melodies obtained from sites, etc. Playing Back Melody 1. From the Data box menu (P153), “Melody” Melody [1/3] Data transfer 0 File The number of files in a folder. i-mode 0 File Pre-installed 45 Files Menu Open Switch • I [Switch] : You can change the type of display of folder. 2. Select a folder ] C • See step 2 “Display screen” for the mark on display screen. Pre-installed [1/46] Data box Go to Melody Playable file format • This FOMA phone supports to display file format as follow. File format 1 Extension name SMF, MFi, MP4 Folder name File name/File size mid, mld 1: Some files may not be played back in file format supported in this phone. 2: The voice format of AAC or AMR of MPEG4 is saved as 3gp file in “i-motion” folder. Menu Open Switch • I [Mail] : You can attach the file to i-mode mail. Go to step 2 on page 139 of “Composing i-mode mail”. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 164 Y Data box 3. Select a file ] C Using the Submenu of the Melody File List See “Using the Submenu of the i-motion File List” (P162) for the Submenus available. Menu Pause Volume Playback bar Playback elapsed time / maximum playback time – C, G: Plays back / pauses – J: Plays pack the previous file / next file – J(Press and hold): Melodies are fast forwarded / fast rewound while pressing it. – H/FE: Adjusts the sound volume – I[ ]: Sets the repeat area (Starting point/ Ending point) If you press in setting, you can release it. See “Using the Submenu of the Folder List” of Images (P156) for the submenu items available. • If you delete the melody set as the tone for incoming call, alarm, and schedule, each melody returns to setting at purchase. Using the Submenu of the Melody Playback Screen Setting item/Setting at purchase > P247 1. From the Melody Playback display (P165), M [Menu] ] Select from the following Submenu items Pause 5 (Play 6) You can pause the melody being played back. Send via mail 1 2 You can attach melody files to i-mode mail for sending. Go to step 2 (P139) of “Composing i-mode mail”. Ringtones 2 3 4 You can set a ring tone for voice or video phone calls. Mute (Unmute) You can mute the tone for playing back melodies. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Data box Using the Submenu on the Folder List Information 165 Data box Data box Set repeat 3 4 You can select a repeat method. – None : You can repeat none file. – Current file ( ) : You can repeatedly play back the current melody. – All files ( ) : You can repeatedly play back all the melodies in the folder. – Shuffle : You can shuffle and play back all the melodies in the folder. Area repeat ( ) 5 You can specify a playback area for playing back melodies. You can set the starting point ( ) and ending point ( ) by pressing I [ ]. If you press in setting, you can release it. Player settings You can change settings of the visual effect and the color tone of the player. File property You can display the name, size, and type, date and time, duration, ringtone, file restriction of the selected file. 1: You cannot use the menu in pre-installed folder. 2: You cannot use this menu in restriction file. 3: You can use this menu in MP4 file, not recording the image. 4: You cannot use this menu in melody saved in miniSD memory card. 5: You can use this menu on playing. 6: You can use this menu on pause or ending to play back. 7: You cannot use this menu on pause or ending to play back. Information • You can also change settings of the ring tone from the Melody File List Screen. From the Melody File List screen (P164), press M[Menu] select a “Ringtone”. Caution on Use of the miniSD Memory Card You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. The miniSD memory card is available at mass retailers for home electric appliances, etc. • The miniSD memory card adapter is available at mass retailers for home electric appliances, etc. • The FOMA L601i is compatible with a miniSD memory card (commercial item) of up to 1G bytes (as of March 2006). However, this does not necessarily guarantee the proper operation of each maker's miniSD memory card. See the following for the latest information. – i-mode: “i Menu” > “Menu list” > “Mobile Phone Maker” > “WOWLG” – PC : http://jp.lge.com/index.do • You may not be able to use the miniSD memory card you formatted using a personal computer and other devices. Be sure to use the miniSD memory card formatted with the FOMA L601i. • The miniSD memory card may be lost or deformed due to an accident or failure. It is advisable to back up important data. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 166 Y Data box • Note that we take no responsibility for direct or indirect damages or incidental guarantee due to the use of the miniSD memory card. – Damages arising from missing opportunities of calls or transmission • • • • • Inserting/removing miniSD memory card Inserting the memory card Data box • – Damages caused by erasing the data you saved in the FOMA phone or miniSD memory card Damages caused by erasing the data you saved in the FOMA phone or miniSD memory card During processing of the card, never remove the miniSD memory card, or turn off the FOMA phone. Confirm that processing of the card does not go on before turning off the FOMA phone and removing the miniSD memory card. The miniSD memory card has an operating life. If you use the miniSD memory card for a long time, you may not be able to write new data on it, or the card is disabled. Do not delete or move folders in the miniSD memory card using a personal computer. The FOMA L601i may fail to read the miniSD memory card. If you have written the data incompatible with the FOMA L601i on the miniSD memory card using a personal computer, the FOMA L601i cannot read it. Do not insert or remove the miniSD memory card with the FOMA phone turned on. It may damage the miniSD memory card or its data. Note that miniSD memory card may pop out when you insert or remove it. • Confirm the direction of the miniSD memory card, and then insert or remove it straight. (If you obliquely insert the miniSD memory card into the slot, the memory card may be damaged.) • It may take long to select or display contents of the miniSD memory card. 1 Open the cover of miniSD memory card's slot to an arrow indication. 2 Insert the miniSD memory card into the slot slowly to listen to c " lick!"with the golden connectors facing up. 3 Close the cover of miniSD memory card's slot to an arrow indication. Next Page 167 Data box Removing the memory card Playing back/Editing Data on the miniSD Memory Card C] ]4 You can insert a miniSD memory card into the FOMA phone to use it as an external memory. If you insert it into a miniSD memory card adapter, you can use a SD memory cardenabled personal computer. • When using a miniSD memory card for the first time, you need to format it in accordance with “Resetting miniSD” (P180). Be sure to format on the FOMA phone. Information Data box 1 Open the cover of miniSD memory card's slot to an arrow indication. 2 Push the miniSD memory card into the slot lightly. • The miniSD memory card is released from the slot. 3 Pull the memory card out of slot straightly. 4 Close the cover of miniSD memory card's slot to an arrow indication. • You can check usage status, and available space of the miniSD memory card. . > P156, P157, P163. Folder Configuration on miniSD Memory Card a To be displayed by FOMA Phone For “Introduction of Data box” (P154), see “miniSD memory card” on the cover. When you move/copy the file from FOMA phone to miniSD memory card or save the still image and moving image in miniSD memory directly, the folder being compatible with a file is created automatically in miniSD memory card. • When moving/copying files from a personal computer to the miniSD memory card, you need to adopt the following folder configuration. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 168 Y Data box miniSD 1 my picture.......Folder to save still images 2 i-motion...........Folder to save moving images /i-motionŦ1 movies 3 melody.............Folder to save melodies privateŦ2 lge thumb 1: i-motion includes of music file. 2: This folder indicates the still image or thumb mark of moving image. The folder is composed automatically after saving the file in “1 my picture”, “2 i-motion”. Do not delete/ move/ save the file in this folder. • A folder name or file name has a limit in the number of characters. The number of characters is except for the number of extension name. – Folder name : Up to 15 characters – File name : Up to 36 characters See “Copy” and “Move” of “Using the Submenu of the Image File List” (P156) or “Using the Submenu of the Moving image File List” (P162) for the operation method. Displaying / Playing Back Files on the miniSD Memory Card • On the FOMA phone, you might not be able to display or play data which was saved to the miniSD memory card from other devices. 1. From the Data box menu (P153), “miniSD memory card” • See “Displaying Images” (P155), “Playing Back Moving Images / i-motion Movies” (P161) and “Playing Back Melodies” (P164) for the subsequent operations. Data box Information Copying / Moving Files between the FOMA Phone and the miniSD Memory Card Playing back i-motion (including of music file) in FOMA phone C] ]5 You can play the music downloaded from internet or CD in FOMA phone after saving them in miniSD memory card. You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. The miniSD memory card is available at mass retailers for home electric appliances etc. > P166 169 Data box • The music file saved in miniSD memory card should be treated by personal use. • Be sure not to infringe on the intellectual property rights and the others of copy-right of third party . • Do not move or exchange the music file saved in miniSD memory card to other devices such as personal computer. 1. You can change the file format from music file of CD to AAC (3gp) by using the software to convert the extension. • After this step, Go to step 3 on page 162 of “Playing back Moving Images/i-motion”. Information • In FOMA phone, the music file cannot be played back continuously despite saving the multiple files. • Although you close the flip, the music can be played back continuously. But, you cannot control the volume. • If you connect a Flat-plug Earphone/Microphone Set (P29), you can listen to the music by headphone. For details about software, please contact the homepage of software provider. 2. After inserting miniSD memory card to personal computer, you can copy the music file in “2 imotion” folder. (P169) Data box • The file name of step 1 is written by half-pitch, so you change the name within 36 characters. a In case of not existing the “2 i-motion” folder The FOMA phone creates the folder automatically by selecting “Data box” > “miniSD memory card” after inserting miniSD memory card. And then, you insert the card into personal computer after removing it FOMA phone. 3. After inserting miniSD memory card into FOMA phone (P167), press C in stand-by mode ] “Data box” ] “miniSD memory card” ] Select “i-motion” folder ] C ] Select the file to play ] C * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 170 Y Tools Tools Tools Select Using Alarm ..........................................172 Alarm Custom menu IrDA Calculator Unit converter World time Stop watch Select To display the Tools menu Setting the Custom Menu ....................173 On the Stand-by display, Using the Infrared Exchange Function................................................174 C [Menu] ] or “Tools” Using Calculator...................................175 Using Unit Converter............................176 Using World Time.................................178 Using Stop Watch ................................179 Using the miniSD Memory Card ..........179 171 Tools Using Alarm C] ]1 You can set Alarm to alert you at the specified time. You can also set Snooze or an alarm tone. Setting Alarm Setting item/Setting at purchase > P230 1. From the Tools menu (P171), “Alarm” Alarm 09 : 00 ɺˁĜʸāǍ 09 : 00 ɺˁĜʸāǎ 09 : 00 ɺˁĜʸāǏ 09 : 00 ɺˁĜʸāǐ Menu Icon Description Alarm is set to “ON” Alarm is set to repeat Edit OFF (Setting repeat) You can select the type of repeat. • If you set “Except holiday”, the alarm does not alert on Sunday or holiday (P184). (Melody) You can select an alarm tone. • Select from alarm tone stored in “Melody” in “Data box”. >P164 (Memo) You can enter an alarm name. (Snooze) Select the time intervals of Snooze. If you do not want to use Snooze, select “OFF”. When the Specified Time Comes Tools • I [ON]/[OFF] : You can set the alarm ON or OFF. When the specified time comes, the display informing of Alarm appears. To stop Alarm, do the following operations: 2. Select the alarm to edit ] C ] Select the item to edit ] C ] After editing, I [Done]. • C[OFF]: You can cancel the setting of alarm. If you set the snooze, you can cancel it. (Setting ON/OFF) You can select “ON” or “OFF”. To set Alarm, select “ON”. Time setting You can set the time for making the alarm sound. 172 • I[Snooze]: Alarm stops. The set Snooze continues. a During a Voice/Video-phone Call An alarm does not sound at the specified time during a call because the icon is not displayed on upper side. After ending the call, the alarm will be alerted on time. Tools • After ending to play a file/to take image, the alarm will be sounded with displaying alarm screen. a During playing back moving image, melody/ activating camera, video camera An alarm does not sound at the specified time during a call because the icon is not displayed on upper side. After ending the call, the alarm will be alerted on time. – Unmark: You can unmark one alarm at a time, which you selected by “Mark” or “Mark all”. – Unmark all: You can collectively unmark all alarms you selected by “Mark” or “Mark all”. Setting the Custom Menu C] Information • If the UIM is not installed, the FOMA phone does not turn on and the alarm does not sound. • If the alarm cannot be sounded during activating i-appli, the alarm icon blinks on upper of the screen instead of alarm sound. Using the Submenu of the Alarm List Screen 1. From the Alarm List screen (P172), M[Menu] ] Select from the following Submenu items You can specify functions to store in the Custom menu. If you store functions frequently used in the Custom menu, you can quickly start the functions simply by pressing Don the Stand-by display. Setting item/Setting at purchase > P232 1. From the Tools menu (P171), “Custom menu” Custom menu 1 Search phonebook 2 Mail 3 i-mode 4 Camera-mode 5 Alarm 6 Select ringtone 7 [Menu7] Menu Select Tools Edit You can edit the selected alarm. Go to step 2 on page 172 of “Setting alarm”. ON/(OFF) You can activate/deactivate the selected alarm. Mark/Unmark After editing the alarm, you can select ON or OFF. – Mark: You can mark one alarm at a time. – Mark all: You can mark all alarms at once. ]2 Edit • C [Select]: You can activate the selected menu. • I [Edit]: You can change the menu saved as Custom. Next Page 173 Tools 2. Use H to select a blank line ] I [Add] • The list of functions that can be stored in the Custom menu appears. 3. Select a function ] C • You cannot select the menu which is already registered. Using the Submenu of the Custom Menu Display 1. From the Custom menu display (P173), M [Menu] ]Select from the following Submenu items Using the Infrared Exchange Function C] You can send and receive data such as Phonebook and Bookmark by using the infrared exchange to and from other FOMA phones and personal computers supporting the infrared exchange function. The data to send by infrared Data Phonebook Tools Add new You can add a function to be registered from the function list. Go to step 3 of “Setting the Custom Menu” (See above). Open 2 You can start the function selected. Edit 2 You can change the functions registered. Go to step 3 of “Setting the Custom Menu” (See above). Delete 2 You can delete a function registered. Delete all You can delete all the functions registered. 1: This Submenu item is displayed when a blank line is selected. 2: This Submenu item is displayed when a registered function is selected. 174 ]3 Contents 1 available (Phonebook of FOMA phone) Own number Bookmark 1 available : You cannot send or receive the image registered in phonebook. Performing Infrared Exchange Place the FOMA phone parallel to another device so that the infrared data ports of these devices face each other. • The infrared data port is located on the right side of the FOMA phone. >P28 • Place the FOMA phone on a stable location such as a table and do not move it during communication. • The distance for infrared exchange should be within 20 cm. Tools Information • During infrared exchange, do not remove the battery. If you remove the battery during exchange the data via infrared, this operation will be stopped. • If the battery is low, you cannot exchange the data via infrared. Before activating this menu, check the capacity of battery. • During data exchange by infrared when receiving a voice call or video-phone call, you can get a call with stopping to exchange infrared. If you don't send or receive the data, activate infrared function again after ending a call. • Receiving the data by infrared can be dependent on the capacity of memory. If you cannot receive the data, delete unnecessary data, and then activate infrared menu again. • Before activating the infrared between the other phone, you check the compatibility of each equipment. • You might not be able to exchange the data by infrared depending on the type of FOMA phone or personal computer. Receiving Data 1. From the Tools menu (P171), “IrDA” 2. Send data at the sending end 3. Receive the data Using Calculator C] ]4 You can perform calculation such as addition, subtraction, multiplication, and division. Use the numeric buttons to enter numbers. For other operations, follow the instructions on the display. 1. From the Tools menu (P171), Select “Calculator” Calculator Sending Data 1. Display of the data to be sent ] M [Menu] ] “Send Ir data” 2. Make sure that the receiving end is ready for receiving the data ] “Yes” Tools Make the receiving end ready for receiving the data and then start sending data within 30 seconds following the steps below. func. < Calculator screen > • • • • *: Used for enter decimal number. #: Used for enter the parenthesis. Q: Userd for delete the number to backward. I[AC]: You can delete the number or cancel the calculation. 175 Tools Using Unit Converter Using the Function Menu of the Calculator Display 1. From the Calculator display (P175), M[func] ]Select from the following function menu items Tools +/Switches between positive and negative numbers sin Used for calculation of trigonometric functions. cos Used for calculation of trigonometric functions. tan Used for calculation of trigonometric functions. log Used for calculation of logarithmic functions. ln Used for calculation of natural logarithms. exp Used for calculation of exponential functions. sqrt Used for calculation of square roots (root). deg Specifies the unit of angle to “degree”. rad Specifies the unit of angle to “radian”. This is useful function to convert currency, surface, length, weight, temperature, volume, and velocity. Converting Unit of Currency C] This is a useful function for converting the yen on hand to the dollar, etc. Setting at purchase > P232 1. From the Tools menu (P171), “Unit converter” ] “Currency” • The screen for converting a currency is displayed. (P177) 2. Select the currency ] I [Rate] Current rate 123 Setting for currency name Setting for currency rate Done 176 ] 51 Tools 3. Select next item ] After setting, press I [Done]. 1. “Unit converter” from “Tool”(P171) ] “Currency” Currency Currency unit field Select the unit of the currency. If you press C, you can edit the currency. But, you cannot change “ ”. Value Entry field You can set the rate of currency. For example, in case you convert from to (Ex. 1 120 ), you can set to 120, to 1. • #: Enters the decimal point. • Q: Deletes the character which you enter. Converting the currency The currency setting the rate converts to the other currency. You can enter the currency in up/ down field to input. The field not input will be displayed the value after converting. Currency unit field Exchange rate 120 : 1 Exchange rate 1:1 Rate unit field Menu Rate Value entry field List 2. Select next item. Currency unit field You can set the unit of the exchange rate. Exchange rate entry field You can enter the exchange rate. • #: You can enter decimal number. • Q: Deletes the character which you enter. • I[Reset]: The numerical value is reset. Tools 177 Tools Converting Unit of Surface C] ] 52 You can change the unit of surface. You can enter the unit in up/ down field to input. The field not input will be displayed the value after converting. Value entry field Enter a numerical value of the surface to be converted. • #: Enters the decimal point. • Q : Deletes the number which you already entered. • I: [Reset]: The numerical value is reset. Setting item/Setting at purchase > P232 1. From the Tools menu (P171), “Unit converter” ] “Surface” • The Surface Unit Conversion display appears Surface Surface unit field Acre Hectare Value entry field List Converting Unit of Length/Weight/ Temperature/Volume/Velocity C] ] 53~7 Setting item/Setting at purchase > P232,P233 1. From the Tools menu (P171), “Unit converter” ]“Length”/“Weight”/“Temperature”/“Volume”/“Ve locity” • For the subsequent operations, follow the same operations as “Converting Unit of Surface” (see left). Tools Using World Time Surface unit field You can select the unit of surface. • You can convert the surface unit either from top or bottom. C] ]6 You can check the date and time of major cities in the world. The time of city “Home” is set by the time of “Setting date/time” (P86). * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 178 Y Tools 1. From the Tools menu (P171), “World time” Using Stop Watch World time Tokyo Jan 01 (Sun) 06 : 37 Home: Tokyo Jan 01 (Sun) 06 : 37 Menu List The city name and time which are checked The date and time set as home city • C[List]: You can select a city to display the city list. 2. Use Jto select a city to be checked • I[Set]: The selected city is set as Home. C] ]7 You can use the FOMA phone as a stop watch. 1. From the Tools menu (P171), Select “Stop watch” • C[Go]/[Stop]: You can start or stop counting. • I[Reset]: You can reset the result of counting. • During counting, you can do the following operations. – I[Lap]: The lap time is recorded and displayed at the bottom of the display. – M[Detail]: You can view the list of the lap records. Using the miniSD Memory Card Using the Submenu of the World Time Display Setting item/Setting at purchase > P233 Choose city You can choose a city. After choosing press C. Set time zone Sets the home country time zone. : This menu is not displayed if you select the city as a home. Tools 1. From the World time display (see above), M[Menu] ] Select from the following Submenu items You can check data or files saved in the miniSD memory card. You can also check the usage status/free space of the memory and can format (initialize) the miniSD memory card. Using Data box C] ] 81 1. From the Tools menu (P171), “miniSD memory card” ] “Data box” • You can check or play back the still images, moving images/i-motion movies and melody files saved in “miniSD memory card” of “Data box”. >P155, P161, P164 179 Tools Checking Memory Information C] ] 82 You can check the usage status or free space of the miniSD memory card. Setting item/Setting at purchase > P233 1. From the Tools menu (P171), “miniSD memory card” ] “Memory info.” ] Select an item to be checked Formatting the miniSD Memory Card C] ] 83 You can format the miniSD memory card to use it on the FOMA phone. 1. From the Tools menu (P171), “miniSD memory card” ] “Reset miniSD card” ] “miniSD” Information Tools • Resetting deletes all the files saved in the miniSD memory card. Please make sure that no important files are saved in the miniSD memory card before formatting. * ou need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 180 Y Stationery Stationery Stationery Scheduler Memo Date search Date counter Select Select Using Schedule....................................182 To display the Stationery menu Using Memo .........................................185 On the Stand-by display, Using Date Search ...............................186 C[Menu] ] or “Stationery” Using Date Counter .............................186 181 Stationery Using Schedule C] ]1 Storing Schedule Events 1. From the Stationery menu (P181), “Scheduler” – The monthly display (P183) appears. 2. Select a date to store a schedule event. ] I[Add] Add new ǎnjnjǒğnjǒğnjǍāĪǰȄȑī None Time All day njnjćnjnjāġāǎǏćǑǕ Subject Stationery Edit Done 3. Select from the following items to store ] After storing, I[Done] Start date You can set a date to start the schedule event. You can enter a date by pressing R and dial buttons. You can select a date from the calendar display by pressing C. End date You can set a date to end the schedule event. You can enter a date by pressing J and dial buttons. You can select a date from the calendar display by pressing C. None 1 (Schedule type) You can set a type of the schedule event. Time You can set time to start and end the schedule event. – All day: The schedule event is stored as an all-day event. – Set time:: You can set time to start and end the event by selecting the time field. You can enter the time by using J and dial buttons. Subject You can set a subject of the schedule event. You cannot store the event without entering a subject. Alarm You can set whether or not to be notified by an alarm when the date and time specified in “Start date” and “Time” come. You can select a melody 1 when the alarm function is set to other than “No alarm”. • You can select the menu from “Melody” of “Data box”. > P164 Repeat 2 You can set the repeat setting for the schedule event. If you do not want to repeat it, select “Once” 1: The content you've set is displayed. 182 Stationery 2: If “Start date” and “End date” are different, you use only “Once”. 2. Select a date in which a schedule event is stored ]C Icon 2006/06/01 (Thu) Information • When the specified time of a schedule event setting by alarm comes, the display to notify it appears. – C [OK]: After stopping the alarm, you can view the time and the subject of schedule. If you press C again, the alarm will be released. – I [Snooze]: You can set the snooze. • As for the operation of alarm setting during a call or taking a photo, see “When the Specified Time Comes” (P172). Checking Schedule Events 1. From the Stationery menu (P181), “Scheduler” The date registered the schedule will be underlined. Select Select Sets the alarm setting. Sets the repeat setting. Add • I [Add]: You can add your own schedule. Go to step 3 on page 182 of “Storing Schedule Events”. • J: Displays the schedule of previous and next day. 3. Select a schedule event ] C View (20/23) Mo Tu We Th Fr Sa Su Menu Menu Add The number of schedule events stored in the date on which the cursor is place • 13: You can move the year of date. • 79/FE: You can move the month of date. • 5: You can move the current date . • I [Add]: You can add your own schedule. Go to step 3 on page 182 of “Storing Schedule Events”. Description 2006/06/01 (Thu) None 10 : 00am ~11 : 00am Umbrella No alarm Alarm01.mid Once Edit Delete Icon Description Start date of schedule End date of schedule The type of schedule Holiday Alarm • For details, see page 182. Next Page 183 Stationery 2006 June 00 : 00 ~23 : 59 āȥȜȹɄ 00 : 00 ~23 : 59 āɄȥȜȹɄ Stationery • C [Edit]: You can edit the selected schedule. Go to step 3 on page 182 of “Storing Schedule Events”. • I [Delete]: You can delete this selected schedule. • J: Displays the previous and next schedule. Using the Submenus of the Monthly Display 1. From the monthly display (P183), M [Menu] ] Select from the following submenu items. Stationery Add new You can add a new schedule event. See Step 2 (P182) of “Storing Schedule Events”. Open You can see the details of the schedule events of the selected date (Daily display). Set holiday You can set the selected date to holiday. After entering the date for holiday, press I [Done]. The setting date is marked in red color. – On the day: Enter the holiday name and set the selected date as a holiday. – Weekly: Enter the holiday name and set the day of the selected date as a holiday for every week. – Monthly: Enter the holiday name and set the selected date as a holiday for every month. – Annually: Enter the holiday name and set the selected date as a holiday for every year. 184 – Duration (2~31): Enter the holiday name and set the holiday period and its title. Go to date The cursor is moved to the specified date. You can enter a date by pressing J and dial buttons. Delete – Holiday: All the schedule events set as holidays are deleted. – Old schedules: Deletes all the schedule events stored for up to the preceding day of the selected date are deleted. – Current day schedules: The schedule events of the selected date are deleted. – Current week schedules: All the schedule events of the week of the selected date are deleted. – Current month schedules: All the schedule events of the month of the selected date are deleted. – All schedules: All the schedule events are deleted. : You cannot the menu if select the date which you've already set “Set holiday”. Stationery Using the Submenus of the Daily Display Screen 1. From the Daily display screen (P183), M[Menu] ] Select from the following Submenu items 1: You cannot use this menu when you select the date which is already set as the holiday in “Set holiday”. Using Memo C] ]2 Creating Memo You can create and save a memo. 1. From the Stationery menu (P181), “Memo” • The memo display (See right) appears. 2. I[Add] ] Enter a memo ] C Viewing Memo You can view the memo that you created. Stationery Add new You can add a new schedule event. See Step 3 (P182) of “Storing Schedule Events”. Open The details of the selected schedule event (Display screen) are displayed. Edit 1 2 You can edit the selected schedule event. See Step 3 on page 182 of “Storing Schedule Events”. Set holiday 1 2 You can set the selected date as a holiday. See “Holiday settings” of “Using the Submenus of the Monthly Display Screen” (P184) for the setting items. Mark/Unmark You can delete all after selecting multiple schedules. After selecting, press I [Delete]. Go to Date Displays the schedule you've already set. You can enter a date by pressing J and dial buttons. Delete You can delete schedule events. 2: You cannot use this menu When you select the date which is already set as the holiday of screen “1day” displayed. 1. From the Stationery menu (P181), “Memo” Memo (1/2) 2006/06/01 (Thu) Meeting June 1 2006/06/01 (Thu) Video-phone call Menu Select Add 2. Select a memo to view ] C • The screen will be displayed. 185 Stationery • C [Edit]: You can edit the selected memo. • I [Delete]: You can delete the selected memo. • J: Displays the previous and next memo. Using the Submenus of the Memo Display/ Display Screen 1. From the Memo display (P185)/Display screen (P185), M[Menu] ] Select from the following submenu items Stationery Add new You can create a memo. See Step2 (P185) of “Creating memo”. Open The display screen of the selected memo is displayed. Edit You can edit the selected memo. See Step2 (P185) of “Creating memo”. Mark/Unmark This function is used when you select and delete multiple memos. After selecting, press I [Delete]. Delete You can delete the memo selected or displayed. : This menu is not displayed in submenus of screen. Using Date Search C] ]3 You can search for the date the target date after a specified period from a specified date. For instance, you can search for the date after 90 days from the current date for convenience. 1. From the Stationery menu (P181), “Date search” ] Select from the following setting items • I [Reset]: You can reset all values of setting. From You can enter a date to start the search. Enter the date by using J and the dial buttons. After You can enter the number of days. Use the numeric keys to enter the number of days. For instance, if you want to know the date after 90 days from the “Start date,” enter 90. Using Date Counter C] ]4 If you store the name and date of an event such as a birthday, you can check how many days remain before the event or how many days have passed after the event. Storing Events in Date Counter 1. From the Stationery menu (P181), “Date counter” 186 Stationery • The Date counter display (P187) appears. 2. I[Add] ] Select from the following setting items ] After setting, I[Done] 2. Select a date counter ] C View (1/2) 2006/05/31 (Wed) (Date) You can set the date of an event. Enter the date by using J and the dial buttons. (Memo) You can enter a memo. You cannot set without entering. Displaying Date Counter 1. From the Stationery menu (P181), “Date counter” Date counter (1/2) – before a number: The number of days before the specified date Menu Select + before a number: The number of days after the specified date Add I[Add]: You can compose the date counter. Go to step 2 (See above) of “Storing Events in Date Counter”. Menu D-day : -1 Edit Delete • C [Edit]: You can edit the selected daily counter. Go to step 2 (See left) of “Storing Events in Date Counter”. • I [Delete]: You can delete the selected daily counter. • J: Displays the date counter of previous and next day. Using the Submenu of the Date Counter Display/Display Screen 1. From the Date counter display (See left)/display screen (See above), M[Menu] ] Select from the following submenu items Add new You can store an event to the date counter. See Step2 (See left ) of “Storing Events in Date Counter”. Next Page 187 Stationery Meeting -1 ǎnjnjǒğnjǑğǏǍ Destination +16 ǎnjnjǒğnjǒğǍǓ Meeting Stationery Open You can view the selected date counter. Edit You can edit the date counter selected or displayed. See Step2 of “Storing Events in Date Counter”. Mark/unmark This function is used when you select and delete multiple date counters. After selecting, press I [Delete]. Delete You can delete the date counter selected or displayed. : This menu is not displayed in submenus of screen. Stationery 188 Network Service NW service Select Available Network Services .................190 NW service Voice mail Call waiting Call forwarding Nuisance call barring Caller ID notification Caller ID request Set arrival act Select To display the Network service menu Using Voice Mail ...................................190 On the Stand-by display, Using Call Waiting Service ...................192 C[Menu] ] or “NW service” Using Call Forwarding Service.............193 Using Nuisance Call Barring Service...194 Using Caller ID Notification Service ....194 Using Caller ID Request Service..........194 Using Set Arrival Act ............................195 Selecting Arrival Call Act......................195 Registering Additional Services...........196 Registering Additional Guidance .........196 Using English Guidance .......................197 Using Service Dialing Number .............198 Using Call Barring.................................198 189 Network Service Information Available Network Services The following are the DoCoMo Network Services available from the FOMA phone: Service Application Monthly fee Reference Network Service Voice Mail Required Charged See Right Call Waiting Service Required Charged P192 Call Forwarding Service Required Free P193 Nuisance Call Barring Service Required Free P194 Caller ID Notification Service Not required Free P194 Caller ID Request Service Not required Free P194 English Guidance Not required Free P197 Service Dialing Number Not required Free P198 Public mode (power off) Not required Free P49 • See “Network Services User's Guide” for more details. • Not all services described in “Network Services User's Guide” are supported. • Contact “DoCoMo Information Center” on the back page of this manual for subscription or inquiry for the Network Services. 190 • The Network Services that are operated by connecting to the Network Service Center are not available when you are out of the service area. • You can store services newly provided by DoCoMo Network Services in the FOMA phone. >P196 Using Voice Mail C] ]1 If your FOMA phone is out of the service area or the power is turned off, or when you cannot answer a call within the set time, the Voice Mail Center holds voice mail messages on behalf of you. You can check the voice mail message anywhere in Japan. • If a call comes in from a caller not notifying caller ID with “Caller ID request” activated, the Caller ID Request guidance is played back and the center will not hold voice mail messages. • Even if Voice Mail is activated, incoming video-phone calls will not be connected to the Voice Mail Center, and the call is disconnected after the duration set in ringing time for Voice mail elapsed. Network Service 1. From the Network Service menu (P189), Voice mail ] Select from the following setting items Network Service Activate voice mail You can start using Voice Mail. Set ringing time You can set the time from the first ring until the call is connected to the Voice Mail Service Center Deactivate voice mail You can stop using Voice Mail. Voice mail status request You can check the current settings of Voice Mail Service. • If you press M [Menu] in setting confirmation screen, you can set the service of voice mail or ringing time. Play messages You can play back messages recorded as Voice Mail. Voice mail setting You can connect to the Voice Mail Service Center to change the settings of Voice Mail by following the voice guidance. Check messages You can check whether or not new messages are recorded. Notify missed call If the FOMA phone is turned off or out of the service area, you are informed by SMS (Short Message Service) of missed calls when the FOMA phone is turned on or in the service area again. – Activate missed call notification: You can start using Missed Call Notice Service. – Deactivate missed call notification: You can stop using Missed Call Notice Service. – Missed call notification status request: You can check the settings of the Missed Call Notice Service. Delete voice mail icon You can delete displayed in the icon view area. Set message alert ringer You can set the ring tone to sound when a new message is recorded. 191 Network Service Using Call Waiting Service C] ]2 Network Service When you receive another voice call during a call, you can put the current call on hold to answer the new call. You can also make a call to another party by putting the current call on hold. • For details related to catch phone, refer to “Network service operation guide”. • When using Call Waiting, set “Arrival call act” to Voice call > Answer. > P195 • If a call comes in from a caller not notifying caller ID while Caller ID Request Service is set to “Activate caller ID Request”, the Caller ID Request guidance is played back and Call Waiting is not available. • When a video-phone call comes in during a voice call, or a voice call comes in during a video-phone call, Call Waiting does not work. The second call is recorded as a missed call in Received Calls. 1. From the Network Service menu (P189), “Call waiting” ] Select from the following setting items Activate call waiting You can start using Call Waiting Service. Deactivate call waiting You can stop using Call Waiting Service. 192 Call waiting status request You can check whether the Call Waiting Service is activated or deactivated. Submenus on using Call Waiting Service • If you press M, you can view the sub-menus. a When a new call comes in during a call Voice mail 1 When a new call comes in, the caller can connect the voice mail center. Call rejection You can reject a call without receiving the call. Call forwarding 2 You can forward the incoming call to the forwarding destination you have registered. End active call You can answer a new call after finishing the current call. Mute/Unmute The voice to send to the other party is set to mute or unmute. 1: You can use the voice mail service when you have signed up this service. See “Using Voice Mail” (P190) for details. 2: You can use the call forwarding service when you have signed up this service. See next page for details. Network Service a When you receive a new call during a call End – End active call: After ending a call, you can take the new call on hold. – End held call: You can end a call on hold. – End all calls: You can end all calls of both side. Mute/Unmute The voice to send to the other party is set to mute or unmute. Using Call Forwarding Service C] ]3 Network Service You can forward an incoming call to the forwarding number you have registered in advance when the FOMA phone is turned off or out of the service area. • If a call comes in from a caller not notifying caller ID while Caller ID Request Service is set to “Activate caller ID Request”, the Caller ID Request guidance is played back and the call is not forwarded. • Call Forwarding Service will be automatically deactivated if “Voice Mail Service” is set to “Activate Voice mail”. • This service is not available with some billing plans. Activate call forwarding You can start using Call forwarding Service. – Register fwd number: You can store the phone number of the forwarding destination. If you press M [Search], you can search for phonebook. – Set ringing time: You can set the time from the first ring until the call is forwarded. Deactivate call forwarding You can stop using Call forwarding Service. Register the forwarding number You can change the phone number of the forwarding destination. If you press M [Search], you can search for phonebook. Setting at forwarded party busy You can set an incoming call to be connected to the Voice Mail Service Center if the forwarded destination is busy. Call forwarding status request You can check the current settings of Call Forwarding Service. 1. From the Network Service menu (P189), “Call forwarding” ] Select from the following setting items 193 Network Service Using Nuisance Call Barring Service C] ]4 You can set the FOMA phone to block calls from specific phone numbers, such as mischievous calls or nuisance calls. If a call comes in from the phone number stored, the FOMA phone plays the Call Rejection guidance and the call is disconnected. 1. From the Network Service menu (P189), “Nuisance call barring” ] Select from the following setting items Network Service Register nuisance caller You can register the phone number of the call that you answered the last for rejection. Delete all entries All the phone numbers registered for rejection are deleted. Delete most recent entry You can delete the latest phone number in phonebook. Using Caller ID Notification Service C] ]5 You can notify your phone number to the other party when dialing. When the other party's phone is the digital terminal that supports caller ID, your phone number appears on the other party’s phone. 194 • Your caller ID is important information, so take great care to notify it. 1. From the Network Service menu (P189), “Caller ID notification” ] Select from the following setting items Activate/Deactivate caller ID notification You can display your phone number on the other party's phone (display) when dialing. To use this service, you enter the Network Security Code. Caller ID notification status request You can check the current settings of Caller ID Notification. Using Caller ID Request Service C] ]6 Caller ID Request Service responds to anonymous callers by playing the guidance asking them to redial with their caller IDs notified and disconnects the calls automatically. 1. From the Network Service menu (P189), Caller ID request” ] Select from the following setting items Activate caller ID request You can start using Caller ID Request Service. Deactivate caller ID request You can stop using Caller ID Request Service. Network Service Caller ID request status request You can check the current settings of Caller ID Request Service. Selecting Arrival Call Act C] Using Set Arrival Act C] ]7 You can activate or cancel the arrival call activation. For details, refer to “Selecting Arrival Call Act” (See right). You can view the current status. 1. From the Network Service menu (P189), “Set arrival act” ] Select from the following setting items You can set how to respond to incoming voice calls while you are on the phone. • After setting the following arrival act, set “Arrival Call Act” (See left) to “Activate arrival act” to start using the set arrival act. Setting item/Setting at purchase > P227 1. From the Network Service menu (P189), “Arrival call act” ] Select from the following setting items Answer The phone rings. If Voice Mail, Call Waiting Service, or Call Forwarding Service is activated, the phone follows each setting. Voice mail Connects incoming calls to Voice Mail. Even if Call Waiting Service is activated, the calls are connected to Voice Mail. Call forwarding Forwards incoming calls to the forwarding phone number registered. Even if Call Waiting Service or Voice Mail is activated, the calls are forwarded. Call rejection Rejects incoming calls. Network Service Activate arrival act You can start using the response you set in “Arrival Call Act”. Deactivate arrival act You can stop using the response you set in “Arrival Call Act”. Arrival act status request You can check the current settings of Set Arrival Act. ]8 195 Network Service Registering Additional Services C] ] 91 When a new service is provided by DoCoMo, you can store it in the FOMA phone. 1. From the Network Service menu (P189), “Others” ] “Additional service” • The additional service list will be displayed. 2. I [Edit] ] After editing, press C [Select] USSD code Enter the service code (USSD) supplied by DoCoMo. Service name Enter any service name. Press I[Edit] to edit. Network Service Using the Submenu of the Additional Service List Screen 1. From the Additional Service List screen, M[Menu] ] Select from the following submenu items Edit Edit a service. Select The selected service is executed. 196 Delete 1 item The selected service is deleted. Delete all All the services registered are deleted. : Not displayed if an unregistered service is selected. Using Registered Services 1. From the Additional Service List screen, Select a registered service ] C Registering Additional Guidance C] ] 92 When you execute services added by “Additional Service”, you can register reply messages that correspond to the codes (USSD) returned from the Service Center. The reply message is displayed when the registered code is returned as a reply. 1. From the Network Service menu (P189), “Others” ] “Additional guidance” • The reply message list will be displayed. 2. I[Set] ] After setting, press C[OK] USSD code Enter the service code (USSD) supplied by DoCoMo. Network Service Reply message Enter a reply message name. Press I [Edit] to edit. Using the Submenu of the Reply Message List Screen 1. From the Reply Message List screen, M[Menu] ] Select from the following Submenu items Using English Guidance C] ] 93 You can set a language for the voice guidance to be played back for outgoing or incoming calls or network services. Available Languages Setting Language Japanese Plays back the guidance in Japanese. English Plays back the guidance in English. Japanese + English First plays back the guidance in Japanese and then in English. : Not displayed if an unregistered service is selected. English + Japanese First plays back the guidance in English and then in Japanese. 1. From the Network Service menu (P189), “Others” ] “English guidance” ] Select from the following setting items Guidance setting – Outgoing + Incoming call: You can set languages of the guidance for outgoing and incoming calls. Select “Yes” and then select a language. – Outgoing call: You can set a language of the guidance only for outgoing calls. Select “Yes” and then select a language. Next page 197 Network Service Set You can set a reply message. Delete 1 item The selected reply message is deleted. Delete all The reply messages registered are all deleted. Network Service – Incoming call: You can set a language of the guidance only for incoming calls. Select “Yes” and then select a language. Guidance status request You can check the current settings of the guidance. Using Service Dialing Number C] ] 94 You can make a call to the DoCoMo repair counter and DoCoMo Information Center. 1. From the Network Service menu (P189), “Others” ] “Service dialing number” ] Select from the following items Network Service Malfunction information A call is connected to the DoCoMo repair counter. General information A call is connected to the DoCoMo Information Center. Lost on abroad (Chargeable) (Abroad) From the information center of DoCoMo, the call will be arrived. • This is chargeable. Malfunction on abroad (Chargeable) From the network technical operation center, the call will be arrived. • This is chargeable. 198 : Depending on UIM, this menu cannot be displayed. Using Call Barring C] ] 95 You can block all incoming calls while you are roaming outside Japan with the FOMA phone. 1. From the Network Service menu (P189), “Others” ] “Call barring” ] Select from the following setting items Activate barring of incoming call -roam – Barring all incoming calls: All incoming calls are restricted. Enter your Network Security Code. – Data calls barring: Only incoming video-phone calls are restricted. Enter your Network Security Code. Deactivate barring of incoming call - roam You can stop using Barring All Incoming When Roam. Enter your Network Security Code. Barring of incoming call -roam status request You can check the settings of Barring All Incoming When Roam. Data Transmission Data Transmission Available from the FOMA phone ........................................200 Before Use............................................201 Glossary of Data Transmission Terms.............................202 Preparation Flow for Data Transmission ...............................203 AT command ........................................203 As for data transmissions, refer to Manual for data transmission (Manual for Data communication.pdf) in CD-ROM for details. To read this manual, it is recommended to set up Adobe Reader (Over Ver 6.0). If your personal computer is not installed in this program yet, you can download it from the latest homepage of Adobe Systems Incorporation. (Note that downloading the S/W can be chargeable.) For details, see the homepage of Adobe Systems Incorporation. 199 Data Transmission Data Transmission Available from the FOMA phone The data transmission services you can use by connecting the FOMA phone to a personal computer are classified as follows: packet transmission, and data transfer (OBEX). • This FOMA handset does not support 64K data transmission. • This FOMA handset is not applicable with Remote Wakeup. • This FOMA handset does not support FAX transmission. Types of Transmission Available Data Transmission Packet Transmission This service charges a transmission fee according to the amount of data you sent and received. The packet transmission is suitable for sending and receiving data only when data transmission is required, with a device always connected to the network. Internet connection service for FOMA It uses an access point which supports FOMA packet transmission such as “mopera U” and allows data transmission at a maximum rate of 384kbps in downloading and 64kbps in uploading. FOMA L601i allows data transmission overseas using an access point compatible with W-CDMA or GPRS packet transmission. 200 • Note that uploading and downloading a massive amount of data results in a high amount of communication fee. Data Transfer This service transfers data using infrared rays. This data transfer service is not chargeable. By infrared exchange, you can exchange data with another FOMA phone or a device having the infrared exchange function such as a personal computer. >P167 Notes for Using Data Transmission Charges of Internet service provider To use the internet, you need to pay the charge for the Internet service provider you use (referred to as “provider” in this document). Besides the FOMA service fee, you need to pay the charge directly to the Internet service provider. For details on the charges, contact the Internet service DoCoMo. You can use the DoCoMo Internet service, “mopera U”. To use “mopera U”, subscription (charged) is required. Data Transmission Setting access point (Internet service provider, etc.) To use the packet transmission, connect to an access point for packet transmission. • You cannot connect to the DoPa access point. • You cannot connect to PHS 64K or 32K data transmission access point such as PIAFS. Before Use System Environments The following system environments are applicable to a personal computer used for data transmission: Item About user authentication for accessing network User certification (ID and password) may be required at connection to some access points. In this case, enter your ID and password on the transmission software (dial-up network).An ID and a password are given from a connecting provider or a network administrator of the connecting access point. Consult your Internet Service Provider or network administrator for details of the ID and password. To carry out the transmission using the FOMA phone by connecting to a personal computer, the following conditions are required. Even when these conditions are satisfied, however, if the base station is congested or the radio wave conditions are bad, you may not be able to carry out transmission. • The personal computer to be used should support the FOMA USB cable. • Within FOMA service area. • The access point supports IP access of packet transmission (PDP type) of the FOMA. • PC-AT compatible PC with CDROM drive. • USB port (USB Specification Rev1.1/2.0 compliant) • Display resolution: 800°X600 dots, High Color (65,536 colors) or higher recommended. OS Windows XP, Windows 2000, Windows Me, Windows 98SE (All Japanese editions) Required memory • Windows XP: 128M bytes or more 2 PC unit • Windows 2000: 64M bytes or more Hard disk space • Windows Me and Windows 98SE: 32M bytes or more 2 Free space of 5M bytes or more 2 1: This does not support in Windows 98FE. 2: Required memory and hard disk space depends on system configuration of a PC. Next Page 201 Data Transmission Conditions for packet transmission Requirements Data Transmission Information • Purchase a dedicated FOMA USB Cable (option). The USB Cable for personal computer cannot be used because the shape of the connector differs. Glossary of Data Transmission Terms a APN An abbreviation for Access Point Name. Used to identify an Internet service provider or Internet LAN system you access for packet transmission. For example, “mopera U” is expressed with character string “mopera.net” in APN. Data Transmission a cid An abbreviation for Context Identifier. A registration number of the APN that is registered in the FOMA phone in advance for packet transmission. In the FOMA phones, you can register up to 10 cid numbers (1 to 10). a DNS An abbreviation for Domain Name System, which converts a name easy-to-understand for human-being. For example, a domain name “mopera.net” is converted into an address indicated by a number easyto-manage for computer. 202 a PDP type An abbreviation for Packet Data Protocol, which indicates packet transmission. Usually, the type provider indicates will be selected from PPP access point and IP access point.This FOMA phone supports IP access service. For PDP type, consult provider or network service. aQ oS An abbreviation for Q uality of Service, which indicates the quality of network service. For the Q oS setting of the FOMA phone, you can specify a communication rate. : Connection rates vary depending on communicating conditions, etc. a W-TCP A TCP parameter used to maximize the TCP/IP transmission capability when carrying out the packet transmission in the FOMA network. To maximize the transmission performance of the FOMA phone, you need to optimize the TCP parameter. a PC Administrator right Means the right with which the user can access all functions of Windows XP and Windows 2000 systems. A user without an administrator right cannot install/uninstall transmission setup files (drivers) and FOMA PC setup software, etc. Data Transmission Preparation Flow for Data Transmission The following outline shows a preparation flow for packet transmission, and data transfer (OBEX) by connecting a FOMA phone to a personal computer. Data transfer (OBEX) Packet transmission Infrared rays Transmission setup files and FOMA PC setup software Attached FOMA L601i CD-ROM contains the transmission setup files (drivers) and FOMA PC setup software. • The L601i transmission setup files are software (drivers) required for packet transmission, and data transfer using a USB Cable (option). • The FOMA PC setup software can setup access points (APN) for packet transmission and dial-up settings easily. AT command Install L600i transfer setup file onto a personal computer Using FOMA PC Not using FOMA PC setup software setup software Data Transmission Specify a connecting access point AT commands are used to specify and modify the functions of the FOMA phone on the personal computer. FOMA phone is in conformity with AT commands. For details, refer to “Data Transmission” (Manual for Data communication.pdf) in CD. Data transfer (OBEX) Using infrared ray > P174 Establish connection 203 Entering Characters Entering Characters ............................ 206 List of Character Assignment of Dial Buttons ......................................... 212 205 Entering Characters Entering Characters About Character Entry Display FOMA phone has some functions to enter characters for phonebook or mail. On the Character Entry display, information on the current input mode or operation guidance is displayed. 1. From the Character Entry display, M [Menu] ] “Input setting” ] “Prediction ON/OFF” 2. ON/OFF Switching Input Mode 1. Press I[Mode] on the Character Entry display (See left) Message Full Full Menu Set Mode Entering Characters 1 Remaining number of bytes: Remaining number of characters you can enter is displayed in bytes. 2 Operation guidance field: Full-pitch and half-pitch are displayed. 3 Input mode field: Input mode is displayed. Setting the prediction conversion to enter character You can set ON/OFF to predict the conversion candidates (P207) on entering Hiragana. • This method is set “ON” at purchase. 206 • Each time you press I[Mode], the input mode switches. “ ” ... You can enter Kanji and Hiragana. “ ” ... You can enter Katakana. “ ”… You can enter Alphabets. : You can enter the capital letter. “ ”… You can enter Numerals. Switching Between Full-pitch/Half-pitch • You cannot switch between full/half-pitch depending on the display of character entry. 1. Press Aon the Full Entry display (See left) Half Entering Characters • Each time you press A, the full-pitch and half-pitch modes switch. Entering Characters in Prediction mode • You can this method on setting “ ” of Hiragana mode. 1. Enter characters on the Character Entry display (P206) Switching Pictograph/Symbol/Emoticon Mode Message • You cannot switch the mode depending on the display of character entry. 1. Press Ton the Character Entry display (P206) Prediction KanaA1 Entering Characters You can enter characters by pressing numeric keys to which desired characters are assigned. • To allocate the character on each button, refer to “List of Character Assignment of Dial Keys” (P212). Conv. • M[KanaA1]: The entered characters are converted to Katakana or Numerals. • I[Conv]: The entered characters are converted to Kanji or other characters. • C: The entered characters are finalized. 2. Move the cursor to Prediction/Conversion area using H. 3. Select a character to convert ] C Entering Characters in Normal mode When entering the characters except for “ ” of Hiragana mode, the conversion is not available. (After Step 2.) 1. On Character Entry display (P206), enter characters • M [Katakana/ Numeral] : You can convert the characters on inputting to Katakana or number. Next page 207 Entering Characters • Each time you press T, the input mode switches. “ ” ... You can enter Pictographs. “ ” ... You can enter full-pitch Symbols. “ ” ... You can enter half-pitch Symbols. “ ” ... You can enter Emoticons. – I [Continue]: You can enter characters after selecting the multiple. After selecting them, press I [Set]. – A: You can change the page. If you select “KeyGo”, the cursor will be jumped. Set Prediction Candidate/Area to convert a candidate Entering Characters • C [Set] : You can confirm the character on inputting. : In Hiragana mode 2. DI [Convert] 3. Move the cursor by pressing H to the area of conversion candidates. 4. Select the character to convert. ] C a Switching Capital/ Small letter mode To switch the capital/ small characters between them, press * several times. If the character is not correspond with each one, you cannot convert it. • You cannot convert the character in numeral mode (“1(12)”). Entering Characters a Entering Full pitch/ Half pitch After entering the character, press A several times. If the character is not correspond with each one, you cannot convert it. • You cannot enter it in English (“a(ab/AB)”) or numeral (“1(12)”) mode. a Entering a punctuation Press * several times. • You cannot enter it in English (“a(ab/AB)”) or numeral (“1(12)”) mode. a Entering Kanji character Press #/D • Press D in numeral mode (“1(12)” a line feed). 208 a Entering a Space M [Menu] > “Special input” > Select “Space”. In case of being the cursor at the middle of sentence, press R to enter a space. a Deleting a character Press Q to move the cursor end to delete the character. Move the cursor to the left of character you Kuten code want to delete and press Q. If you press Q for at least one second, you can delete all characters. Using the Submenu on the Character Entry Display • A few menu cannot be activated depending on the display of character entry. Return Select Cont. 1. From the Character Entry display (P206), M[Menu] ] Select from the following Submenu items. Common phrases – Input common phrase: You can select and enter the registered common phrases. – Edit common phrase: You can create and register common phrases and edit registered common phrases. See step 2 in “Editing Common Phrases” (P210). Edit character You can specify a range to copy/cut and paste characters. See “Copying/Cutting/Pasting” (P209). Edit word You can register words. See Step 2 (P211) of “Registering Words”. Entering Characters : After converting the English mode “a(ab/AB)”, you can activate the menu. 2. Enter a Kuten code using the numeric buttons ] C • You can also select characters or symbols using K. Copying/Cutting/Pasting You can copy or cut a character string and paste it to another display/position. 1. From the Character Entry display (P206), M[Menu] ] “Edit character” ] “Copy”/“Cut” 2. Move the cursor to the start position using K] C 3. Move the cursor to the end position using K] C 4. Display the Character Entry display to which you want to paste the copied/cut characters ] Move the cursor to the desired position for pasting using K. 5. M[Menu] ] “Edit character” ] “Paste” • Select M [Menu] ] “Edit character” ]“Undo” in sequence to undo cut or pasted characters. Information Entering Characters Using Kuten Code You can enter characters or symbols using the four-digit Kuten code. • For details, see “Kuten code list” (P258). 1. From the Character Entry display (P206), M[Menu] ] “Special input” ] “Kuten code” • If the number of characters which are copied or cut from the sentence exceeds the limitation, you can paste them after deleting the characters over limitation. • When you paste the character after copying or cutting, its type should be same. For example, you cannot input (half pitch of English and number) hiragana or Chinese character in screen to input mail address. Next Page 209 Entering Characters Quote – Phonebook: You can access a Phonebook entry and quote the registered contents. Go to step 3 on page 60 of “Searching Phonebook”. – Own number: You can bring up your own number and quote the registered contents. Input setting – Full/Half: You can switch between full-pitch and half-pitch. – Upper/Lower : You can switch between upper case and lower case. – Prediction ON/OFF: You can activate the Prediction and Conversion function. Special input – Changing line: You can start a new line – Space: You can enter a space – Kuten code: You can enter characters using the Kuten code. Entering Characters • If you paste character lines including a line feed in the entry screen that line feeds cannot be entered, it is replaced by a blank (one-byte space). Editing Common Phrases You can edit registered common phrases or add new common phrases. 1. From the Character Entry display (P206), M[Menu] ] “Common phrases” ] “Edit common phrase” Edit common phrase Entering Characters 1 Internet 2 Greeting 3 Business 4 Private 5 Reply 6 Pictograph idiom 7 Original Menu Select 2. Select Category ] C • The Select Common phrase display appears. • If you press C in common phrase list, you can view all categories. • If you register new phrase, select “Original”. 3. Select a common phrase to be changed ] I[Edit] ] Edit/input the common phrase ] C 210 Using the Submenus of the Edit Common Phrase Display/ Select Common Phrase Display / Input Common Phrase Display 1. From the Edit Common Phrase display (See left)/Select Common Phrase display (See left)/Input Common Phrase display (See left), M[Menu] ] Select from the following Submenu items. Reset all 1 All common phrases are reset to their defaults. Delete 1 item 2 A selected/displayed common phrase is deleted. Reset 1 item 2 A selected/displayed common phrase is reset to its default. Category reset 2 All common phrases stored in the category are reset to their defaults. Cancel You can cancel editing of common phrases. 1: Displayed on the submenu of the Edit Common Phrase display. 2: Displayed on the submenu of the Select Common Phrase display. Information • If you activate the menu “Reset all”, the contents of “Original” will be deleted. Entering Characters Registering Words For those words not displayed as the conversion candidates or words with unusual readings, you can register them together with their readings. Once registered, the words are displayed as conversion candidates when their readings are entered. 1. From the Character Entry display (P206), M[Menu] ] “Edit word” • The registered Words List is displayed. • Select a dictionary and press C to confirm the registered words. 2. I[New registration] ] Select the next item to register ] After registering, I[Register] following Entering Characters Reading You can set reading of “Word”. Word You can set a word that will be displayed as a conversion candidate when you enter characters registered as “Reading”. Deleting Words 1. From the Registered Words list (See above), M[Menu] ] “Delete 1 item”/“Delete all” ] “Yes” 211 Entering Characters List of Character Assignment of Dial Buttons You can enter a character by pressing dial button. On pressing one button, you can enter multiple characters as follow the table. Whenever you press the button on pressing # button at the same time, the character will be changed in reverse order. Entering Characters 1: In full-pitch mode, “ ” or “ ” is displayed only when the character to which “ ” or “ ” can be added is displayed. 2: You can enter a character in full-pitch mode. 3: In half-pitch mode, “ ~” is displayed. 4: You can enter a character in half-pitch mode. 5: If you set capital mode in “Switching Capital/Small letter mode” (P209), the capital letter will be displayed at first. 212 Overseas Use Network Settings................................. 214 International Roaming Service ........... 214 Using the FOMA Phone Overseas...... 216 213 Overseas Use Network Settings C] Before Departure ]5 You can connect 3G network setting at purchase. If you use GSM/GPRS network, set “GSM” or “Automatic” of “Setting the Network Mode” (P88). If you know the network in your area, you can select it directly. For details to set the network refer to “Network Settings (for overseas use)” (P87). International Roaming Service Refer to “WORLD SERVICE User’s Guide” for details of the communications services available while in international roaming. NTT DoCoMo’s website offers the downloadable latest version of “WORLD SERVICE User’s Guide” as well as the latest information about WORLD SERVICE: http://www.nttdocomo.co.jp/service/world/ Application for WORLD WING Overseas Use DoCoMo’s “WORLD WING” international roaming service is available with no need for separate application. However, subscribers who signed up for FOMA service on or before August 31, 2005 and have not applied for “WORLD WING” need to submit an application to use the service. > P221 214 Charging the Battery Make sure of the voltage available in the country or area of stay and use the FOMA AC Adapter 01 for overseas and domestic usage (a conversion plug adapter according to the place of stay will be required). Using Voice Mail/Call Forwarding from Overseas Use of the Voice Mail or Call Forwarding service from abroad is part of “remote operation” operation and requires the activation in advance of Remote operation before your departure. The procedure is: 159A] Follow the voice guidance 1] P Before departure, make sure that you have the Network Security Code, which may be required for remoteaccessing the Voice Mail etc. If you have forgotten your Network Security Code, visit a DoCoMo Shop or DoCoMo World Counter with an identification document such as the driver’s license to make necessary changes. Overseas Use Using i-mode/i-mode Mail Overseas To use i-mode or i-mode mail overseas, you need to set “International Settings” to “YES”. After Arriving at the Destination Overseas Networks and Services Available a To change settings in Japan • No packet transmission fees apply. “iMenu” ] “Options” ] “International Settings” ] “YES” a To change settings outside Japan Packet transmission fees apply. “iMenu” ] “International Settings” ] “YES” • If set to “NO”, you can send and receive i-mode mail messages and view the i Menu only. The default setting is “NO”. Menu i-mode Voice Packet transmission (i-mode, mopera U, etc.) SMS Videophone 3G GPRS GSM Network Icon Services marked with “O” in the table above may not be available depending on the mobile phone carrier being used or the place of stay. Visit the DoCoMo website for details about services available in the individual countries or regions: http://www.nttdocomo.co.jp/service/world/ Next Page 215 Overseas Use Some i-mode sites may not be available depending on the information provider. Packet transmission fees apply to all types of access from overseas including transmissions that are free of charge in Japan. Japan time applies even if i-mode sites are accessed from overseas. Be careful when registering entries to or deleting entries from My Menu at the beginning or end of a month. 01/28 [Sat] Mail See “Network Name” (P89) to display the network name on connecting and to set it. Overseas Use Information • You can set whether to display Japan time together with the local time on the stand-by display. > P73 Setting Mobile Phone Carrier The network will be set after searching it automatically if “Setting the Network Mode” (P88) is set to “Automatic” in international roaming. • You can set up beforehand the type of network on searching by “Setting the Network Mode” (P88). • If you search the network automatically, you can set the preferred network by “Registering a Network from the list” (P88). • You can select the network manually. Refer to “Selecting the Network Connection Mode” (P87). Information Overseas Use • “Network mode” is set to “Automatic” if “3G”/“GSM”, “Network connection mode” are searching automatically. • After you search with “Network mode” set to “Auto” and “Network selection” set to “Manual”, the mode (“3G”/“GSM”) the same as the type of network (communication carrier) selected after the search is sets to “Network mode”. Using the FOMA Phone Overseas • If the other party subscribes to a mobile phone carrier supporting the FOMA video-phone, you can make a video-phone call by pressing T. Making Calls a Calling from Overseas to Japan • Check the setting “No prefix” in “Setting Prefix Dial” (P83). Press and hold 0for two seconds to display “+” ] 81(Country code for Japan) ] Other party’s phone number excluding “0 (zero)” at the beginning of the area code ] A ( T) Example: When the other party is in one of the 23 wards of Tokyo (area code: 03) “+”> 81 > 3 > XXXX – XXXX a Calling another WORLD WING/WORLD WALKER user • Make sure that “Auto assist setting” is set to “OFF”. Press and hold 0for two seconds to display “+” ] 81(Country code for Japan) ] Other party’s phone number excluding “0 (zero)” at the beginning of the area code ] A ( T) Example: When the other party has a mobile phone number beginning with (090) “+” > 81> 90>XXXX – XXXX 216 Overseas Use a Calling a mobile phone or fixed-line phone within the country of stay Dial the other party’s phone number including the area code ] A ( T) a Calling from the country of stay to a mobile phone or fixed-line phone in another country (other than Japan) • Make sure that “Auto assist setting” (P83) is set to “OFF” Press and hold 0for at least one second to display “+” ] Country code of the other party ] Other party’s phone number excluding “0 (zero)” at the beginning of the area code ] A Receiving calls When a call comes in, A (T) Having Others Call You While Overseas a Receiving a call from Japan a Receiving a call from a country other than Japan Unable to Make or Receive Calls/Always Out of Service Area/Handset Does Not Turn ON Possible causes for inability to make or receive calls, reception level indication permanently being “Out of service area” or the handset not turning on are: • Weak radio waves being received or being out of the service area • Failure of the local switchboard or base station or temporary line congestion • Wrong operation of the handset • Other Visit the DoCoMo website for the latest information about service areas and network interruption: http://www.nttdocomo.co.jp/service/world/ In addition, make sure of the operation and try the following: • If you are indoors, see if the condition is the same outdoors. • See if your monthly charges have not exceeded the limit. • Turn OFF the handset once and back ON. • Manually select the mobile phone carrier to use. If the problem persists after the above troubleshooting procedures have been taken, contact the Network Technical Support and Operations Center (P219). International access code of the country the call originates ]81(Country code of Japan) ]Your phone number excluding “0 (zero)” at the beginning ]CALL 217 Overseas Use Have the other party call you at your regular mobile phone number. 090>XXXX – XXXX/ 080>XXXX – XXXX ] CALL Troubleshooting Overseas Use Overseas Use Limit on Charges If i-mode is inaccessible • A limit is set for WORLD WING charges. When we have recognized that your monthly charges exceeded the limit, WORLD WING service is suspended until the end of the month. • The limit applies to charges including call charges, videophone call charges, packet transmission and SMS transmission charges while in international roaming. However, the limit does not apply to the international call forwarding charges or charges for which the billing data from the overseas carrier used have not been received by DoCoMo, and the billed amount may exceed the limit. In that case, the subscriber will still be responsible for the monthly WORLD WING charges for use until the suspension. • When the payment of the monthly charges has been confirmed, the suspension of WORLD WING service is lifted (the lifting process may take some time after the payment has been made). From overseas, the payment can be made by credit card transaction (one-time payment only). • Contact the DoCoMo Information Center for details. • If i-mode sites other than “iMenu” is unavailable, first make “International Settings” (P215). Some sites may not be available depending on the information provider. • The i-mode services may not be available depending on the operator being used. • Select a mobile phone carrier compatible with packet transmission. • For the latest information about overseas carriers compatible with packet transmission, visit the DoCoMo website. • “i-mode” services offered by overseas carriers are not available. 218 After Coming Back to Japan • You have to set “3G” in network mode (P88). • If the “Network selection” (P87) has been manually set up overseas, switch to “Auto” or, after searching again, select “JP DoCoMo-3G”. Overseas Use Contact (While outside Japan) a Universal Number If the handset is lost or stolen, etc. International Call ID Number for the Universal Number (see Table 1) (24-hour service) – 800-5931-8600 a Universal Number International Call ID Number for the Universal Number (see Table 1) – 800-0120-0151 Local dialing charges may apply for the country or region of stay. a If the Universal Number above is not available International access code for the country of stay (see Table 2) – 81-3-5366-3114 Local dialing charges may apply for the country or region of stay. a If the Universal Number above is not available International access code for the country of stay (see Table 2) – 81-3-6718-1414 Dialing charges for calls to Japan will apply. The International Call ID Numbers for the Universal Number in Table 1 and international access codes in Table 2 are subject to change. Major Country Codes Dialing charges for calls to Japan will apply. Please be aware that you are charged for call fee incurred after the phone or UIM is lost or stolen. Contact the Information Center immediately after the loss and follow procedures to cancel the service. Code Country/Region Code Australia 61 Egypt 20 Austria 43 Fiji 679 Belgium 32 Finland 358 If the Handset is not Working Properly Brazil 55 France 33 (24-hour service) Canada Germany 49 China 86 Greece 30 Czech 420 Hong Kong 852 Next Page 219 Overseas Use Country/Region Overseas Use Country/Region Code Hungary 36 India 91 Country/Region Code Russia 65 Singapore Indonesia 62 South Korea 82 Italy 39 Spain 34 Austria 00 New Zealand 00 Macao 60 Sweden 46 Belgium 00 Norway 00 Malaysia 689 Switzerland 41 Brazil 0021 Philippines 00 Maldives 960 Tahiti 689 Canada 011 Singapore 001 Netherlands 31 Taiwan 886 China 00 South Korea 001 New Caledonia 687 Thailand 66 Columbia 009 Spain 00 New Zealand 64 Turkey 90 Denmark 00 Sweden 00 Norway 47 UK 44 France 00 Switzerland 00 Peru Philippines 51 63 USA Germany 00 Taiwan 00 Vietnam 84 Hong Kong 001 Thailand 001 Visit the WORLD WING website for other country codes and details. Overseas Use International Call ID Number for the Universal Number (Table 1) Country/Region Code Country/Region Code Australia 00 Luxembourg 00 900 Malaysia 00 90 Netherlands 00 Major International Access Codes (Table 2) Country/Region Code Country/Region Code Australia 0011 Italy 00 Country/Region Code Country/Region Code India 00 Netherlands 00 Argentina 00 UK 00 Indonesia 001 UAE 00 USA 011 Israel 014 Ireland 00 UK 011 Ireland 00 Italy 00 220 Overseas Use When making calls from a hotel, you may be separately charged for telephone usage fees by the hotel. (You will be responsible for these fees.) Please check with the hotel before you make calls. Country/Region Code Country/Region Code Belgium 00 Switzerland 00 Brazil 0041 Sweden 00 0021 Spain 00 0023 Thailand 001 Canada 011 Taiwan 002 China 00 Turkey 00 At DoCoMo e-site Czech 00 Luxembourg 00 Denmark 00 Macao 00 a By i-mode “iMenu” ] “Charges&Applications” ] “DoCoMo e-site” Philippine 00 Malaysia 00 Finland France 990 Monaco 00 00 New Zealand 00 Germany 00 Norway 00 Greece 00 Philippines 00 Hong Kong 001 Poland 00 Hungary 00 Portugal 00 South Korea 001 Russia 810 Singapore 001 Vietnam 00 Applying for WORLD WING a From a personal computer My DoCoMo (https://www.mydocomo.com/) ] DoCoMo e-site You need to enter your “Network Security Code” for application by i-mode. You need to enter your “My DoCoMo ID” and “Password” for application from a personal computer. DoCoMo e-site may not be available for the application depending on the contracted contents. Overseas Use The Universal Number may not be available in some areas. The Universal Number can only be used in the countries included in the table of International Call ID Number for the Universal Number, as shown above. 221 Overseas Use By phone a From DoCoMo mobile phone or PHS 151 (toll-free) Not accessible from fixed-line phones, etc. a From fixed-line phones, etc. 0120–800–000 a DoCoMo World Counter Central Japan International Airport: Business Center P@tio, 3F Central Japan International Airport Terminal Building Processing the application may take time. Allow sufficient time for application at the DoCoMo World Counter. For business hours, refer to “WORLD SERVICE User’s Guide”. Also accessible from a mobile phone or PHS. Make sure that you dial the correct number. At DoCoMo Shop Your local DoCoMo Shop accepts the application. At the DoCoMo World Counter Applications accepted even on the day of departure. a DoCoMo World Counter Narita International Airport No. 1: 4F Central Building, Narita International Terminal 1 Overseas Use a DoCoMo World Counter Narita International Airport No. 2: B1F Main Building, Narita International Terminal 2 a DoCoMo World Counter Kansai International Airport: 4F Kansai International Airport Terminal Building 222 How to Use WORLD CALL a Check the setting contents of “International Settings” C [Menu] ] or “Settings” ] “Call feature” ] “International dial” ] “IDD prefix setting” • Set to use “009130010” for WORLD CALL. a Making Display “+” > Country code > Area code > Other party’s phone number > A When you call a mobile phone, dial the mobile phone number after the country code. When the other party’s area code or mobile phone number begins with 0, omit the zero when dialing (this does not apply in some countries/regions). Appendix Menu list ...............................................224 Pre-installed data .................................248 List of Terms 252 Symbol/Special Character List ............253 Pictograph and Emoticon List .............254 Common Phrase List............................256 Kuten Code List....................................258 List of city in World time ......................267 Multiaccess Combination Patterns .....268 Multitask Combination Patterns ..........269 Service Available with FOMA Phones ......................................273 Introduction of Data Link .....................274 Troubleshooting ...................................275 Error Messages ....................................277 Introduction of Options and Related Equipment ............................................297 Warranty and Maintenance Services ..297 Specific Absorption Rate of the Mobile Phone .......................................300 Export/Re-export regulations of Japan and USA.....................................300 223 Appendix Menu list • You can select the function by pressing the button corresponding with the number in a table. Menu Item Setting Item (Blue color: Setting at purchase) P147 Pre-installed i-appli only i-appli Reference i-mode P109 1 iMenu – P110 2 Bookmark No bookmarks P111 3 Screen memo No screen memos P112 4 Last URL No URL history P113 5 Go to location 1 Input address http:// 2 URL history No URL history 6 Message 1 MessageR No messages 2 MessageF No messages 7 Check new message P114 – P117 8 i-mode setting Enable/Disable 1 Home Appendix URL Address: http:// 2 View 224 1 Character size Small/Standard 2 Image display ON/OFF 3 Scroll 1 line/3 lines/5 lines P118 Appendix Menu Item Setting Item (Blue color: Setting at purchase) 4 Message list disp. 1 line/2 lines 5 Pasted melody ON/OFF Reference P118 – 3 Certificates 4 Others 1 Connection timeout 60 seconds/90 seconds/Unlimited 2 i-motion auto play ON/OFF 3 Check new message Mail/MessageR/MessageF (All marked) 4 Check settings – 5 Reset settings – 6 Reset data – P119 NW Service P189 1 Voice mail P190 – 2 Set ringing time – 3 Deactivate voice mail – 4 Voice mail status request – 5 Play messages – 6 Voice mail setting – 7 Check messages – P191 8 Notify missed call 1 Activate missed call notification – 2 Deactivate missed call notification – Next Page 225 Appendix 1 Activate voice mail Appendix Menu Item Setting Item (Blue color: Setting at purchase) 3 Missed call notification status request Reference – 9 Delete voice mail icon – 0 Set message alert ringer – P191 2 Call waiting 1 Activate call waiting – 2 Deactivate call waiting – 3 Call waiting status request – P192 3 Call forwarding 1 Activate call forwarding 1 Register fwd number – 2 Set ringing time 2 Deactivate call forwarding – 3 Register the forwarding number – 4 Setting at forwarded party busy – 5 Call forwarding status request – P193 4 Nuisance call barring 1 Register nuisance caller – 2 Delete all entries – 3 Delete most recent entry – Appendix 5 Caller ID notification 1 Activate/Deactivate caller ID notification – 2 Caller ID notification status request – 6 Caller ID request 226 P194 Appendix Menu Item Setting Item (Blue color: Setting at purchase) 1 Activate caller ID request – 2 Deactivate caller ID request – 3 Caller ID request status request – 7 Set arrival act Reference P195 1 Activate arrival act – 2 Deactivate arrival act – 3 Arrival act status request – 8 Arrival call act Answer/Voice mail/Call forwarding/Call rejection 9 Others P196 1 Additional service Not recorded 2 Additional guidance Not recorded P197 3 English guidance 1 Guidance setting Outgoing+Incoming call/ Outgoing call/ Incoming call 2 Guidance status request – 4 Service dialing number – 2 General information – 3 Lost on abroad (Chargeable) – 4 Malfunction on abroad (Chargeable) – P198 Appendix 1 Malfunction information 5 Call barring 1 Activate barring of incoming call - roam 1 Barring all incoming calls – 2 Data calls barring – Next Page 227 Appendix Menu Item Setting Item (Blue color: Setting at purchase) 2 Deactivate barring of incoming call - roam – 3 Barring of incoming call - roam status request – Mail Reference P198 P127 1 Inbox Inbox No messages Folder created by user None P129 2 Outbox No messages P134 3 Unsent message No messages P137 4 Compose mail 1 Compose message – – 5 Check new message – 6 Receive option – 7 Check new SMS – P139 P141 P143 8 Mail setting 1 Communication Appendix 1 Receive opt. setting ON/OFF 2 Receive attach file Image, Melody (All marked) 3 Check new message Mail, MessageR, MessageF (All marked) 4 SMS report request ON/OFF 5 SMS validity term None/1 day/2 days/3 days 2 Edit 228 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 P144 P145 Appendix Menu Item 1 Edit signature Setting Item (Blue color: Setting at purchase) Reference Auto attach: No mark Signature field: No mark 2 Edit quotation 1 Character size Small/Standard 2 Scroll 1 line/3 lines/5 lines 3 Mail list display 1 line subject/1 line address/1 line name/2 lines address/2 lines name 4 Folder security Inbox, Outbox, Unsent message(All unmarked) 5 Melody auto play ON/OFF 6 Pasted data Pasted melody, i appliTo (All marked) 3 View P145 4 Others 1 Check settings – 2 Reset settings – 3 Reset data – Data box 1 My picture P153 Camera, Data transfer, i-mode No data Item,Pre-installed Only preinstalled file Folder created by user None Camera, Data transfer, i-mode No data Pre-installed No data Folder created by user None P154 P161 Next Page 229 Appendix 2 i-motion P146 Appendix Menu Item 3 Melody 4 miniSD memory card Setting Item (Blue color: Setting at purchase) Data transfer, i-mode No data Pre-installed Only preinstalled file Folder created by user None Folder created by user None Multimedia Reference P164 P168 P99 1 Camera-mode – P101 2 Movie-mode – P106 Stationery 1 Scheduler P181 Not registered Schedule type None/Private/Anniversary/Trip/ Work/Meeting Alarm No alarm/On time/Before 15 mins/Before 30 mins/Before 1 hour/Before 1 day/Before 3 days/ Before 1 week Repeat Once/Daily/Mon~Fri/Sat~Sun/ P182 Weekly/Monthly/Yearly 2 Memo Not registered – 3 Date search Appendix 4 Date counter P185 Not registered Phonebook 1 Add to phonebook P186 P57 Not registered 2 Search phonebook 230 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 P58 P60 Appendix Menu Item Setting Item (Blue color: Setting at purchase) 1 Show all data – 2 Group search – 3 Reading search – 4 Memory No. search – 5 Phone No. search – 6 Domain search – P60 – 3 No. of phonebook Reference P63 4 Phonebook settings 1 Display data Handset only/UIM only 2 Create domain list 1. @docomo.ne.jp 2~10. Not registered 3 Search by Show all data/Group search/Reading search/ Memory No. search/Phone No. search/Domain search 4 Display image ON/OFF 5 Group settings Group name: Group 1 - Group 30 (Not setting) 6 Own number – P65 Tools 1 Alarm P63 P171 ON/OFF setting: ON/OFF (Not setting) ON/OFF (Duration setting) Once/Daily/Mon~ Fri/ Sat~Sun/Except holiday P172 Next Page 231 Appendix (ON/OFF setting) Appendix Menu Item Setting Item (Blue color: Setting at purchase) (Snooze) Reference OFF/In 5 mins/In 10 mins/ In 30 mins/In 1 hour/ P172 In 2 hours/In 4 hours/ In 8 hours/In 1 day/In 1 week 2 Custom menu 1 Search phonebook, 2 Mail, 3 i-mode, 4 Camera-mode, 5 Alarm, 6 Select ringtone, 7~10 Not registered P173 3 IrDA – P174 4 Calculator – P175 5 Unit converter 1 Currency P176 Currency unit 2/ 2 Surface Surface unit 1/ P177 Acre/Hectare/Square in/ Square feet/Square yd/ Square miles/Square mm/ Square cm/Square m/ Square km 3 Length Length unit mm, cm, m, km, Inch, feet, Appendix yard, mile 232 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 P178 Appendix Menu Item 4 Weight Setting Item (Blue color: Setting at purchase) Weight unit Reference mg, g, kg, ton, ounce, pound, stone 5 Temperature Temperature unit Celsius/Fahrenheit 6 Volume Volume unit Milliliter, Liter, Cubic mm, Cubic cm, Cubic meter, Cubic inch, Gallon, Liq.pt, Liq.oz, Fluid oz, Barrel 7 Velocity Velocity unit 6 World time km/h, meter/sec, mile/h, feet/sec – Choose city Home setting 7 Stop watch P179 267 Tokyo – 8 miniSD memory card 1 Data box – 2 Memory info. – – 2 Reserved memory – 3 UIM memory – 4 miniSD – Appendix 1 Common memory Next Page 233 Appendix Menu Item Setting Item (Blue color: Setting at purchase) Reference – P180 3 Reset miniSD card Sound 1 Ring volume 2 Effect tone volume 3 Select ringtone Appendix 4 Select effect tone 234 P67 Voice call Level 0~7 (Level 3) Video-phone Level 0~7 (Level 3) Mail tone Level 0~7 (Level 3) MessageR tone Level 0~7 (Level 3) MessageF tone Level 0~7 (Level 3) SMS tone Level 0~7 (Level 3) Key tone Level 0~7 (Level 3) Power ON/OFF Level 0~7 (Level 3) Flip tone Level 0~7 (Level 3) Feedback tone Level 0~7 (Level 3) Voice call Ring01.mid Video-phone Ring02.mid Mail tone Message02.mid MessageR tone Message03.mid MessageF tone Message04.mid SMS tone Message05.mid Key tone ON/OFF Power ON/OFF ON/OFF Flip tone Sound off/Sound1/Sound 2/ Sound3 P68 P68 Appendix Menu Item 5 Vibration settings Setting Item (Blue color: Setting at purchase) Reference Feedback tone ON/OFF P69 Incoming call OFF/Pattern 1 (Vibration only)/Pattern 2 (Vibration only)/melody + vibration Message OFF/Pattern 1 (Vibration only)/Pattern P70 2 (Vibration only)/melody + vibration 6 Manner settings Manner mode/Original manner mode 1 Manner mode 2 Original manner mode 7 Mail ring duration 8 Set mute seconds – Incoming call sound ON/OFF Incoming call vib. ON/OFF Message sound ON/OFF Message vibration ON/OFF Key tone ON/OFF Flip tone ON/OFF Low battery tone ON/OFF Mail ring ON/OFF ON/OFF Mail ring duraiton Time 3 Sec./Duration 1 Cycle P71 P72 0 Sec. P67 1 Main display P72 Next Page 235 Appendix Display Appendix Menu Item 1 Stand-by display Setting Item (Blue color: Setting at purchase) Clock type Reference Do not show/Small digital/ Large digital/Dual clock/ Clock theme 1/Clock theme 2/ Clock theme 3/Clock theme 4 Wallpaper Wind.jpg Clock font color Total 16 colors (Black) Clock1 Tokyo Clock2 London 2 Incoming call Incoming_call_clean 3 Outgoing call Outgoing_call_clean P73 2 Sub display 1 Stand-by display Clock type Analog/Small digital/ Large digital Wallpaper Sub_wind Clock font color Total 16 colors (Deep Blue) Dial font size Small/Large Dial font color Total 16 colors (Orange) P74 2 Incoming call 3 Outgoing call 3 Font Appendix 4 Menu style Grid/List 5 Backlight Main display 10 seconds/30 seconds/60 seconds/ 120 seconds/180 seconds 236 P75 Appendix Menu Item Setting Item (Blue color: Setting at purchase) Sub display Reference 10 seconds/30 seconds/60 seconds/ 120 seconds/180 seconds Keypad P75 10 seconds/30 seconds/60 seconds/ 120 seconds/180 seconds 6 Color scheme P76 Space/Lovely/Clear/Clean Settings P77 1 Call/Answer P78 1 Call history 1 Received calls No record 2 Redial No record 3 All calls No record P79 2 Call duration Last call, Received calls, Redial calls, All calls (00:00:00) 3 Auto answer Auto answering ON/OFF Delayed time 10 P80 (0~120 SEC) Accept/Reject on list/Reject all calls 5 Memory reject call ON/OFF 6 Answer mode Press send key/Open flip/Press any key P81 P82 2 Call feature 1 Reconnect alarm High alarm/Low alarm/No alarm Next Page 237 Appendix 4 Reject/Accept call Appendix Menu Item Setting Item (Blue color: Setting at purchase) 2 Quality alarm High alarm/Low alarm/No alarm 3 Minute reminder ON/OFF 4 Prefix dial PREFIX 1 009130010 PREFIX 2~3 Not registered Reference P83 5 International dial 1 Auto assist setting Auto/OFF 2 IDD prefix setting IDD prefix name WORLD CALL IDD prefix code 009130010 6 Close setting P84 End the call/Continue (Mute) 3 Video-phone 1 Video-phone settings VoiceCall AutoSwitch ON/OFF Display setting Both/Other/Me Sub screen Me/Other Send camera image ON/OFF Sending img. quality Prefer image quality/Normal/Prefer motion quality Display light Always on/Terminal setting Image Default image/Selected image Image list Not setting Image Default image/Selected image Image list Not setting Image Default image/Selected image P85 2 Image settings 1 Substitutive image Appendix 2 Response hold image 3 On-hold image 238 P86 Appendix Menu Item Setting Item (Blue color: Setting at purchase) Reference Image list Not setting Set time 00 : 00 : 00 Time format 12-hour/24-hour Hour indication OFF/Cuckoo clock/Chime bell Set date 2006.01.01 Date format DD/MM/YYYY / MM/DD/YYYY / 4 Date & Time 1 Set time 2 Set date P86 YYYY/MM/DD 3 Daylight saving ON/OFF 5 Network 1 Network selection Auto/Manual 2 Network mode Auto/WCDMA only/GSM only 3 Preferred lists Depending on user's setting 4 Network name display Display on/Display off 6 Host selection P87 P89 i - mode 7 Security 1 All lock Power on/Immediate/None 2 PIN code request Depending on the UIM (FOMA card) setting P90 1 PIN1 code Depending on the UIM (FOMA card) setting 2 PIN2 code Depending on the UIM (FOMA card) setting 3 Security code 0000 P91 Next Page 239 Appendix 3 Change password Appendix Menu Item Setting Item (Blue color: Setting at purchase) 1. Reference 2. English P91 9 Others 1 Memory status 1 Common memory – 2 Reserved memory – 3 UIM memory – 4 miniSD – P92 2 Reset settings 1 Clear memory – 2 Default settings – 3 SMS center 4 Reset holiday SMSC DoCoMo Address 81903101652 – : The setting is registered in FOMA phone and FOMA card (UIM), but if each setting is different, the setting of FOMA card is preferred. Appendix 240 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 P93 Appendix Default List of the Submenu/Function Menu Items Video-phone talking screen > P52 Items / Function Name Setting Items Camera settings (Zoom) X1/X2 (Brightness) High/Medium/Low (Night mode) ON/OFF Video phone settings Display setting Both/Other/Me Sub screen Me/Other Display light Always on/Terminal setting Sending img. Quality Normal/Prefer motion quality/Prefer image quality Phonebook list screen >P59 Items / Function Name Search phonebook Setting Items Show all data/Group search/Reading search/Memory No. search/Phone No. search/Domain search Phonebook settings ON/OFF Display data Handset only/UIM only Appendix Display image Next page 241 Appendix Still image finder stand-by screen >P102 Submenu Items (Size) Setting Items 1280X1024/640X480/352X288/320X240/176X220/176X144/128X96/ Phonebook (Quality) Super fine/Fine/Normal (Light) OFF/Auto/Always on/When taking (Multishot) OFF/3/6/9 (Zoom) (Brightness) (White balance) Auto/Daylight/Cloudy/Incandescent/Fluorescent (Night mode) ON/OFF (Frame shot) Choose frame/No frame (Auto timer) None/3 sec./5 sec./10 sec. (Effect) None/Black & White/Sepia/Negative (Shutter sound) Shutter 1/Shutter 2 (Size restriction) No restriction/100KB/9KB (Flicker tuning) Auto/50Hz area/60Hz area (Save to) Handset mem./miniSD 242 *You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. > P166 Appendix Still Image Display (After taking a multishot) > P102 Submenu Item Set as wallpaper Setting Items Main display/Sub display Slide show settings View as Normal screen/Full screen Time interval (secs) 1 ~ 9 sec (s) (1) Sort by Name/Date/Type View by Simple list/Detailed list/Grid Moving Image Display > P106 Submenu Item Setting Items (Quality) Super fine/Fine/Normal (Light) OFF/Always on/When recording (Zoom) (Brightness) (White balance) Auto/Daylight/ Cloudy/Incandescent/Fluorescent (Night mode) ON/OFF (Effect) None/Black & White/Negative/Sepia (Recording time) 30 secs/1 min/2 mins/5 mins/60 mins/Mail attach (Flicker tuning) Auto/50Hz area/60Hz area (Save to) Handset mem./miniSD (Type) Sound+Video/Video only/Sound only Next page 243 Appendix MessageR/F list screen >P115 Items / Function Name Sort Setting Items Subject(asc.)/Subject(desc.)/Date(asc.)/Date(desc.) Filter All/Unread/Read/Protected/Not protected/Pasted/Attached Received mail list screen >P131 Items / Function Name Setting Items Sort Subject(asc.)/Subject(desc.)/Address(asc.)/Address(desc.)/Date(asc.)/ Date(desc.) Filter All/Unread/Read/Protected/Not protected/Pasted/Attached/i-mode mail/ SMS/SMS report Sent mail list screen >P134 Items / Function Name Setting Items Sort Subject(asc.)/Subject(desc.)/Address(asc.)/Address(desc.)/Date(asc.)/ Date(desc.) Filter All/Protected/Not protected/Attached/i-mode mail/SMS Appendix 244 Appendix Unsent mail list screen > P138 Submenu Item Setting Items Sort Subject (asc.)/Subject (desc.)/Address (asc.)/Address (desc.)/Date (asc.)/ Date (desc.) Filter All/Attached/i-mode mail/SMS Software list screen >P149 Submenu Item Setting Items Sort Name (asc.)/Name (desc.)/Exec time (asc.)/Exec time (desc.)/ Create time (asc.)/Create time (desc.)/S/W size (asc.)/S/W size (desc.)/ Exec count (asc.)/Exec count (desc.) Network setting Yes/No/Check every start i-appli To Yes/No Icon info setting Yes/No Autostart setting Set/Not set Show/Don't show Show desc setting Appendix Next page 245 Appendix Image folder list screen >P155/Image file list screen >P155/Image display screen >P155 Submenu Item Setting Items Sort by Name/Date/Type View by Simple list/Detailed list/Grid Slide show settings View as Normal screen/Full screen Time interval (secs) 1 sec ~ 9 secs (1 sec) Image edit screen >P159 Submenu Item Resizing Setting Items 640x480/320x240/160x120/Wallpaper size/Phonebook size/Sub display size Insert Text > Text focus (P251) Frame > Frame (P250) Element > Stamp (P251) Clipping 1280X960/640X480/320X240/160X120/Wallpaper size/Phonebook size Effect Black & White/Sepia/Negative/Black & White negative/Color balance/Contrast/ Sharpness/Softness/Mosaic Blur Appendix 246 Appendix Moving image folder list screen >P160/i-motion file list screen >P161/Moving image playback screen >P161 Submenu Item Setting Items Sort by Name/Date/Type View by Simple list/Detailed list/Grid Player settings Visual effect Spectrum analy/Dancing notes Player skin (Color) Pink/Blue/Violet Volume OFF~Level 7 (Level3) Melody folder list screen >P164/Melody file list screen >P164/Melody playback screen >P165 Submenu Item Setting Items View by Simple list/Detailed list/Grid Sort by Name/Date/Type Set repeat None/Current file/All files/Shuffle Player setting Volume Visual effect Spectrum analy/Dancing notes Player skin Pink/Blue/Violet OFF~Level 7 (Level3) Appendix 247 Appendix Pre-installed data In stand-by mode a Main display Clock_bg1 Clock_bg2 Clock_bg3 Clock_bg4 Flower Red-glare Space Wind Sub_red glare Sub_space Colorful a Sub-display Appendix Sub_colorful 248 Sub_flower Sub_wind Appendix The screen for receiving / making a call a Main display Clean_in_calling Clean_out_calling Clear_in_calling Clear_out_calling Incoming_call_clean (Gray) Incoming_call_clear (Purple) Incoming_call_lovely (Pink) Lovely_in_calling Lovely_out_calling Outgoing_call Outgoing_call_clean (Gray) Outgoing_call_clear (Purple) Outgoing_call_lovely (Pink) Space_in_calling Space_out_calling Appendix Incoming_call a Sub display Sub_incoming Sub_outgoing 249 Appendix Frame • The frame including of multiple file size can be different to view depending on file size. Appendix 250 Appendix Element • It can be different to view depending on file size. Text focus i-motion File name DiMAGIC eco-motion Melody name Melody name Alarm01 ~ Alarm03 If I Could Beautiful Life Jasmine Bless You Keep Tension Blues Mania Message01 ~ Message12 Cave No.31 Nothing to Talk Chicken Soup Play Dominoes Come to Me Ring01 ~ Ring03 Dark Valley Roll the Dice Driving Bayside Salute for Me Energetic Today Secret Of Nature Funny Funky She Smiles Green Park Touch of Light Hide and Seek Violet High as Moon Welcome My Friend Hunter G What Happened • The copyright of each melody belongs to LG electronic Japan, Inc. Appendix Information List of melody • L601i does not support 3D sound. 251 Appendix List of Terms a 3G: It is the general term of the 3rd generation mobile communications system based on the global standard (IMT-2000) which is defined by ITU (International Telecommunication Union). a 3GPP: 3GPP stands for 3rd Generation Partnership Project, and it is the name and the standard of the organization formed in order to standardize the 3rd generation mobile communications system. a GSM: GSM stands for Global System for Mobile Communications, and it is one of the radiocommunications systems. It is the 2nd generation mobile communications system whose standard has been unified in Europe and which has spread globally through out the world. Appendix a GPRS: GPRS stands for General Packet Radio Service, and it is a packet communication service with maximum of 115kbps transmission speed which can be used in the GSM network. 252 a IrDA: IrDA stands for Infrared Data Association, and it is the name of the industry organization which establishes the specification of the data communications in Infrared rays and its standard. a SSL: SSL stands for Secure Sockets Layer, and it is the data communication system which enciphers data and communicates safely. a USB: USB stands for Universal Serial Bus, and it is the standard for connecting peripheral equipment with a personal computer. a Roaming: Roaming uses the networks of the carriers tied up with DoCoMo for communications out of DoCoMo’s service area. When you use the phone overseas, the services of DoCoMo, such as phone calls and i-mode communications, can be received by using the global roaming service. Appendix Symbol/Special Character List a Full-pitch symbol Special Character Information computers. Next page 253 Appendix • Special characters might not be correctly displayed if they are sent to mobile phones which do not support i-mode or personal Appendix a Half-pitch symbol Pictograph and Emoticon List Pictograph List a Pictograph1 a Pictograph2 Appendix 254 Appendix Emoticon List Category Expressions Category Expressions Category Happy Angry Embarrass Cry Sweat Greeting Chill Surprise Other Expressions Information Appendix • For the method of entering pictographs and emoticons, see “Switching Pictograph/Symbol/Emoticon” (P207). 255 Appendix Common Phrase List Phrase Category Internet folder @docomo.ne.jp Greeting folder .ne.jp .co.jp Greeting folder I'm back Happy birthday! Business folder I have always been indebted. .com Thank you for your consideration. .or.jp I'm sorry .go.jp I'm so sorry seriously. .ac.jp Give me as soon as possible. http:// Could you please wait for a second? www. I'll contact you later on. .html I'll send e-mail to you. Good morning Please check the fax. Good night I'm late because the train is delayed. Good afternoon Appendix 256 Phrase Category Private folder Let's go out. Good evening What about going out for drinking? How are you? I'm late Long time no see I'll change Thank you for the other day. Stop I'm going I'll go at first Appendix Phrase Category Private folder Reply folder Phrase Category I'm back now Pictograph It's time up idiom folder (?) (Hello) How can I do? (Waiting a call) Where are you? (Happy) Thank you! (Angry) (Christmas) bye-bye! Original folder OK You can enter your own phrase from 1 to 0. Not good Thank you I'm sorry Wait for a moment Let's contact later I can't do it now I got it!! Pictograph (Glad) idiom folder (OK) Appendix (Lovely) (Return) 257 Appendix Kuten Code List To enter a Kuten Code, first enter the three-digit number for “Kuten digits 1 to 3” and enter the one-digit number for “Kuten digit 4” • Some characters in Kuten Code List may appear different from those on the display. Kuten digit 1 to 3 Appendix 258 Kuten digit 4 Kuten digit 1 to 3 Kuten digit 4 Kuten digit 1 to 3 Kuten digit 4 Appendix Kuten digit 1 to 3 Kuten digit 4 Kuten digit 1 to 3 Kuten digit 4 Kuten digit 1 to 3 Kuten digit 4 Appendix Next Page 259
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 260 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5b12ac8e-3c4c-41e2-8de9-0ee89e6df897 Modify Date : 2006:07:04 22:43:35+09:00 Create Date : 2006:07:04 22:43:26+09:00 Metadata Date : 2006:07:04 22:43:35+09:00 Document ID : uuid:48ac8795-3b95-4868-8457-71ae3735765b Format : application/pdf Title : untitled Producer : Acrobat Distiller 6.0 (Windows)EXIF Metadata provided by EXIF.tools