LG Electronics USA LACT10-R Smart/RF Card Authentication System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1208565
Application ID	2K6H6jTPVk83jwJO75Z0EA==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	308.83kB (3860349 bits)
Date Submitted	2009-12-03 00:00:00
Date Available	2010-01-17 00:00:00
Creation Date	2009-11-19 11:14:30
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-11-19 11:27:04
Document Title	횉짜횁철.PDF

Smart/RF Card Authentication System
Owner‘s Manual
mm:-
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance)> Wiien a button is pressed or a card is being read.
) Error Tone (Two short beeps) '
‘ >>> Authentication tailed or wrong usei input.
/—
) Beeping '
‘ >>) Waiting for fingerprint input
(Confirmation Tone
(Three short beeps)
‘ >)) Authentication successiui oi settings ior tiie
current user aie oompieted
2. Introduction
2.1. Features
7Access control system using LAN.
- Communication between the terminal and authentication server is done through d TCP/IP protocol, so an existing LAN can be used
as it is. It guarantees network—based administration and monitoring as well as easy expansion, high reliability, and higher speed.
7Simple and fast authentication process.
iHigh capacity of terminal and sewer.
- There is no limit on user registration for the sen/er, and the terminal itself can store up to 20,000 card user.
Various information messages.
- It ensures easy fingerprint recognition because voice and LCD window information are provided during the authentication process.
In addition, the backlight installed in the LCD window helps With easy key operation in the dark.
:Various and flexible Access controls.
- Perfect control by assigning different security clearances to
each user or group RF Card registration, Card authentication
- Provides flexibility by allowmg limited time for entry/exit. inan Password registration, Password authentication
iVarious applications including Access, T&A, RFlPW Card and password registration,
Cafeteria management Card or password authentication.
- Various operation modes depending on the terminal menu RF&FW Card and password registration.
settings. Password authentication after card authentication.
fVarious registration and authentication methods lDflPWiRFfl-FW Card and password registration, ,
7 There are a total of 5 registration and authentication methods, Sasswogd aggheptictationflafler I3 mg? T t
so you are required to select one method before registering asswor au en m "m a er car au en ica ‘On'
users and an administrator. >x RF defines ‘125KHZ Proximity Card‘ or '13.56MHZ Smart Card‘.
15
2. Introduction
2.2. Configuration
2.2.1. Network configuration
Network Server
iAulhemicaflon Server)
TCPMP
2.2.2. Standalone configuration
Door iock system
16
2. Introduction
2.3. Specifications
Item
SPEC
REMARK
CPU
325i! RiSC CPU
MEMORY
BM SDRAM
2M FLASH (Defauiii
User 10000 / Log: 20,000
4M FLASH iomiun)
User 20000 / Log: 98.000
Authenlicatlon speed
< 0.2 SEC
Communication Purl
TCP/IP, Wiegand in&0m
RSVZGZ, RS—ABS. 2 Reiay
Temperature/ Humidity -10 ~ 50 / Lowerihan 90% RH
LCD 128 X 6A Graphic LCD
SIZE MOXBQXZB mm
AC / DC Adapler INPUT . Universai AC 100 ~ 220V
OUTPUT : DC 12V iomion : DC 24V)
UL. CSA, cs Approved
Card Reader
HF Card Reader (LACTiO-R)
EM Card,125kHZ
Smart Caid Reade! (LACT1 075)
ISO 14443 A—Iype, 13.56MH1
17
3. Environment settings
3.1. Check items before setting the environment
3.1.1. Entering menu
The following screen appears when the [EN'H button is pressed for over
2 sec.
1. User
2. Network
3. Option

ID : 0001
18
- Press [0] to view menus not shown
in the LCD window.
- If a number corresponding to the
menu required is pressed (ex. [1] for
user account), the following screen
for administrator authentication
appears.
K- Press [ENfl after entering the
administrator‘s D and the
administrator authentication is
processed according to the previous
setting such as lingerprint
authentication or password
authentication. ll authentication is
successful, sub-menus oi the menu
chosen appear.
fiAdministrator authentication is required
only once, so all menus are accessible
until he exits from the menus altogether.
3. Environment settings
3.1.2. Change settings
To change settings, press the [DEL] button to delete old values and input new values.
Press [0] to see menus not shown in the LCD window, and press the corresponding number
to select a menu.
Press [ENT] for settings verification or to move to the next setting, and press the [DEL]
button to move to upper menus.
Hold the [DEL] button for over 2 sec. to cancel the current setting and move to the upper
menu.
19
3. Environment settings
3.1.3. Save environment settings
Press the [DEL] button in the main menu to save enVironment settings and
the following screen appears
Save? Press [1] to save changes.
[Y—1/N—2] , If not. Dress [2].
If there are no changes made to the settings. "Save?“ does not appear. and
the initial screen appears.
If there is no input for a certain period of time while setting the environment,
the settings process Wl|| finish. If there are changes made to the settings,
"Save?“ appears. If not, it does not appear and the initial screen appears.
20
3. Environment settings
3.2. Menu configuration
DPress [Ent] for over 2 sec. to enter the menu.
1) Lock Terminal
2) Read Card No
a) inieriaeirig with
sensor for lire
1) System Config


1) Add
2) Deiele
3) Modify
4) Add Admin
1) Appiicalion Terminai I 001
[0:Access/1=Tlme Anendance/2=Ca'eleria] Version =1 0.0] _DO
1. m1 mode 2 Meai mode
   
1) Terminal in
2) Mode
[NS/SN/NO]
a; Network Type
5) Deiele A” [Static lP/DHCP] (Leave Time>      Network Type
5) Subnet Mask  Gateway
I z‘ 92-1681“
a) Set Door iock Subnefl Mask
 =255 255 255 0
 sewer 'P
=1 92.1681]!
 syn pen egsm
Card Reader em:
4) Sound 0mm" card reader Version
 :3 DOS
 Dip Switch-000000


21
3. Environment settings
3.3. User account
3.3.1. User registration
Press [Ent] for over 2 sec. Press [1] to
to enter main menu. register a new user.
Press [1]. Enter a new user ID. Select one from 1—5
' 59's“ '1 Add’ and press [Ent]. registration methods.
~ If the entered in aiready exists.
it moves in the upper menu with
a “ppibig” sound
22
3. Environment settings
3.3.1.1. "1. RF" registration
iFingerprint registration and fingerprint authentication.
Press [Em] for over 2 sec.
to enter main menu.
Press [1] to
register a new user.
ESE) ENE! "ppigr.
uuuuuu
s till-PW inn-kw
Select one from 1~5
Enter a new user ID,
registration methods.
and press [Ent].
- ii the entered it) aiready exists.
I| moves to the upper rnenu with
a "ppibig" sound
Press [1].
- Select ‘t Add”.
Press [1].
t nr
1 inww .
s RFiPW “pptg” “ppig” I
6 nrtpw
Piace the card
~ To cancel registration, press the [DEL] button.
If a user pieces the card close to the unit,
three short beeps(registration is successrui)
wili be heard and the “1.Add“ menu appears.
ii the entered ID is aiready used.
you wiii hear an error tone and
the screen wili go to the previous menu.
23
3 Environment settings
3.3.1.2. “2. ID&PW” registration
D Password registration and password authentication for a user.
Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user ID,
to enter main menu. register a new user. ' We“ '1- Adi"- and press [Ent].
- If the entered iD aiready exists,
it moves to the upper menu with
a “ppibig” sound.
Select one from 1-5 Press [2]. Input PW and press [Ent]. Input the same password
registration methods. ' ”SSW“ Shéu'd be and press [Ent].
1-5 characters In tanglh- - input the same password once more
tor verification.
if you hear three short beeps,
registration is successfui
If the passwords are different you wiii
hear an error (one indicating faiiure and
the “1.Add" menu screen appears.
24
3 Environment settings
3.3.1.3. “3. RFIPW" registration
D Card and password registration, card or password authentication.
Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user ID,
to enter main menu. register a new user. ' We“ '1- Adi"- and press [Ent].
- If the entered iD aiready exists,
it moves to the upper menu with
a “ppibig” sound.
Select one from 1—5 Press [3]. Place the card. Input PW and press [Ent]. Input the same password
registration methods. - it fails, “ppibig' and it ~ Password shouid be and press [Ent].
moves to ‘1. Add'. 1-3 characters in length. . mm the same password 0m mm
for verification.
W you hear three short beeps.
registration is successful.
w the passwords are difrerent you wiil
hear an error tone indicating iarlure and
the '1 Add‘ menu screen appears.
25
3 Environment settings
3.3.1.4. “4. RF&PW" registration
D Card and password registration, card and password authentication.
Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user ID,
to enter main menu. register a new user. ' We“ '1- Adi"- and press [Ent].
- If the entered iD aiready exists,
it moves to the upper menu with
a “ppibig” sound.
Select one from 1—5 Press [4]. Place the card. Input PW and press [Ent]. Input the same password
registration methods. - it fails, “ppibig' and it ~ Password shouid be and press [Ent].
moves to ‘1. Add'. 1-3 characters in length. . mm the same password 0m mm
for verification.
W you hear three short beeps.
registration is successful.
w the passwords are difrerent you wiil
hear an error tone indicating iarlure and
the '1 Add‘ menu screen appears.
26
3 Environment settin s
3.3.1.5. “5. ID&PWIRF&PW" registration
D RF-Card and password registration, ID input and password authentication or card and password authentication.
08m - 6 “ppm. 9 “W's" e npplg’ ..Pplg.
Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user ID.
to enter main menu. register a new user. ' 59‘s“ ‘1- Add'- and press [Ent].
- If the entered in aiready exists.
ir moves in the upper menu with
a “ppibig” sound
- “w e “wig“ ‘ ‘ppig. - “pm. .
Select one from 1~5 Press [5]. Place the card. Input PW and press [Ent]. Input the same password
registration methods. ‘ " hils- "PPibig' an“ i‘ ' Fissw‘m’ 5m“ be and press [Ent].
moves to ‘1. Add'. 14! characters in length. . mm the sums passwom onus mm
for verification
it you hear three short beeps.
registration rs suncessiul.
h the passwords are diflerent you wiiI
hear an error tune indicating iailure and
the '1 Add' menu screen appears.
27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2009:11:19 11:14:30+09:00
Modify Date                     : 2009:11:19 11:27:04+09:00
Metadata Date                   : 2009:11:19 11:27:04+09:00
Document ID                     : uuid:6D8B532CB1D4DE119A38F4C9CA107F1A
Instance ID                     : uuid:59a24b57-f619-4f7c-8b0f-9788b54689af
Derived From Instance ID        : uuid:1baf85dd-e1cc-4292-b72a-a6644ebe9f0e
Derived From Document ID        : uuid:cdccac22-6392-47f6-b9f3-870775e792fe
Format                          : application/pdf
Title                           : 횉짜횁철.PDF
Has XFA                         : No
Page Count                      : 26

EXIF Metadata provided by EXIF.tools