LG Electronics USA LB563B 15-inch Color LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	145149
Application ID	I5WcggSy2xxoG6KOg/Ki/Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.23kB (302816 bits)
Date Submitted	2001-04-16 00:00:00
Date Available	2001-04-12 00:00:00
Creation Date	2001-03-22 18:25:02
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2001-03-26 12:13:06
Document Title	Users Manual

Contents
ENGLISH
Introduction ...........................................................A1
Connecting the Monitor.........................................A2
Location and Function of Controls ........................A3
Control Panel Function ..........................................A4
On Screen Display (OSD) Control Adjustment ....A5
On Screen Display(OSD) Selection
and Adjustment .....................................................A6
Video Memory Modes ...........................................A8
Troubleshooting .....................................................A9
Specifications .......................................................A10
DEUTSCH
Einleitung ................................................................B1
Anschließen ............................................................B2
Ort und Funktion der Bedienungselemente ..........B3
Bedienungselemente der Bildkontrolle..................B4
On Screen Display (OSD) Anpassung ...................B5
OSD Einstellung und Auswahlsymbole .................B6
Videospeichermodi ................................................B8
Störungen................................................................B9
Produktbeschreibung ...........................................B10
FRANÇAIS
Introduction ...........................................................C1
Branchement du Moniteur ....................................C2
Nomenclature et Fonctions ...................................C3
Fonctions du Paneau de Commande.....................C4
Réglage des Commandes Affichage Écran.............C5
Options de sélection et de Réglage
OSD (affichage écran) ..........................................C6
Mise en Mémoire de Modes Vidéo........................C8
Quelques Conseils en Cas D’incident....................C9
Spécifications D'entree........................................C10
ITALIANO
Introduzione ..........................................................D1
Collegamento del Monitor ....................................D2
Posizione e Funzione dei Conando di Controllo ..D3
Funzione del Pannello di Controllo.......................D4
Controllo Regolazione On Screen Display (OSD)....D5
Elementi di Selezione e Regolazione dell'OSD.....D6
Modalità di Memoria Video ..................................D8
In Caso di Problemi ...............................................D9
Specifiche.............................................................D10
ESPAÑOL
Introducción ...........................................................E1
Conectando del Monitor ........................................E2
Ubicacion y Funcion de los Controles ...................E3
Función del Panel de Control.................................E4
Ajuste del Control de Exhibición en Pantalla (OSD) .......E5
Ajuste del OSD y Selección de Elementos .............E6
Modos de Memoria de Video.................................E8
Sugerencias para Localizar las Fallas......................E9
Especificaciones ....................................................E10
PORTUGUÊS
Introdução...............................................................F1
Conectando o Monitor ...........................................F2
Posição dos Controles e Descrição ........................F3
Funções do Painel de Controle ..............................F4
Ajuste On Screen Display(OSD) ............................F5
Ajustes OSD e Itens de Seleção .............................F6
Modos de Memória de Vídeo.................................F8
Resolvendo Problemas............................................F9
Especificações .......................................................F10
NEDERLANDS
Inleiding .................................................................N1
De Monitor Aansluiten..........................................N2
De plaatsing en de werking van de knoppen........N3
Het bedieningspaneel ............................................N4
Bediening via het beeldscherm OSD
(On Screen Display) ..............................................N5
Kiezen en instellen via het OSD-systeem..............N6
Modi voor videogeheugen.....................................N8
Problemen oplossen...............................................N9
Specificaties .........................................................N10
The FLATRON LCD 563LE/LS Flat Panel Monitor has an active matrix
TFT (Thin-Film Transistor) LCD (Liquid Crystal Display).
This monitor is designed for use in small working areas or for those who need
more working space on the desk.
Features
The FLATRON LCD 563LE/LS is a 15.1-inch (15.1 inches viewable) intelligent
micropro-cessor based monitor.
Digitally controlled auto-scanning is done with the microprocessor for horizontal
scan frequencies between 31 and 61kHz, and vertical scan frequencies
between 56 and 75Hz.
The microprocessor-based digital controls allow you to adjust conveniently a
variety of image controls by using the OSD (On Screen Display).
It supports resolutions up to 1024x768, and has a wide viewing angle of ±60
degrees horizontal and ±45 degrees vertical.
The monitor is shipped with 14 factory pre-programmed video modes that are
permanently resident. In addition, there are 16 user-storable modes, for a total
of 30 memory modes.
Plug and play capability if supported by your system.
This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
- EPA ENERGY STAR
- Swedish TCO’99
*For detailed information, please refer to the Reference Guide provided .
A1
ENGLISH
Introduction
Connecting the Monitor
On the back of the monitor are two plug-in connections; one for the AC
power cord, and the other for the signal cable from the video card.
1 Power off both the monitor and PC.
2 Connect the 15 pin VGA connector of the supplied signal cable to the output
VGA video connector on the PC and the matching input connector on the rear
of the monitor. The connectors will mate only one way. If you cannot attach
the cable easily, turn the connector upside down and try again. When mated,
tighten the thumbscrews to secure the connection.
2' Locate the appropriate MAC to VGA adapter block at your local computer
store. This adapter changes the high density 3 row 15 pin VGA connector to
the correct 15 pin 2 row connection to mate with your MAC. Attach the other
end of the signal cable to the side of the adapter block with 3 rows.
Connect the attached adapter block/signal cable to the video output on your
MAC.
3 Connect the plug from the AC-DC adapter into the connector on the display
unit. 1 Connect one end of the AC power cord into the AC-DC adapter. 2
Plug the other end into a properly grounded three-prong AC outlet. 3
4 Power on the PC, then the monitor.
5 If you see the NO SIGNAL message, check the signal cable and
connectors.
6 After using the system, power off the monitor, then the PC.
IBM PC
D-15P
MACINTOSH
Mac Adapter
D-15P
2'
Signal Cable
Power Cord
* NOTE : If you see the “OUT OF
RANGE” message, check to make
sure your system is set to one of the
factory preset modes.(see page A8)
AC-DC adapter
A2
Location and Function of Controls
Front View
Power Indicator
OS
AUTO
OSD Button
Power Button
• •
• •
/SE
• •
AUTO/SET Button
Buttons
Rear View
•
•
ID Label
D-Sub Signal Connecter
•
DC Power Connecter
A3
Control Panel Function
Front Panel Controls
Buttons
Power Button
OSD Button
OSD
AUTO/SET
AUTO/SET Button
Control
OSD
Function
Use this button to enter and from the on
screen display (OSD).
OSD Button
Buttons
100
100
AUTO/SET
Power (DPMS) Indicator
AUTO/SET Button
PROCESSING
AUTO CONFIGURATION
Use these buttons to choose or adjust items in
the on screen display.

• Brightness and Contrast can be adjusted directly without
entering the On Screen Display (OSD) system. Touch
the
buttons to adjust the settings and then
the OSD button to save all changes. The Brightness
and Contrast functions are also available in the On
Screen Display (OSD) menu.
Use this button to enter a selection in the on
screen display.
* AUTO adjustment function
Touch the AUTO/SET button before using OSD menu.
This button is for the automatic adjustment of the screen
position, clock and phase.
Note: Some signal from some graphics boards may not function
properly. If the results are unsatisfactory, adjust your monitor’s
Position, Clock and Phase manually.
Power (DPMS)
Indicator
This indicator lights up green when the
monitor operates normally. If the monitor is in
DPM (Energy Saving) mode (stand-by/
suspend/power off), this indicator color
changes to amber.
Power Button
Use this button to turn the monitor on or off.
A4
On Screen Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system. A
quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before making image adjustment.
To make adjustments in the On Screen Display, follow these steps:
AUTO/SET
OSD
OSD
AUTO/SET
Press the OSD Button, then the main menu of the OSD appears.
To access a control, use the
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the AUTO/SET Button.
Exit the OSD by Pressing the OSD Button.
A5
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selection and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.
OSD Adjust
Description
Brightness
BRIGHTNESS CONTRAST
Used to adjust the brightness of the
screen.
88
100
Contrast
Adjust the display to the contrast
desired.
COLOR
PRESET
9300K
6500K
RED
GREEN
BLUE
PRESET 9300K/ 6500K
To appear the displays color
temperature.
• 9300K:Slightly bluish white.
• 6500K:Slightly reddish white.
RED
To set your own color levels.
GREEN
To set your own color levels.
BLUE
To set your own color levels.
POSITION
Vertical Position
61
To move image up and down.
39
Horizontal Position
To move picture image left and right.
A6
On Screen Display(OSD) Selection and Adjustment
OSD Adjust
Description
TRACKING
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.The horizontal screen
size will also change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
CLOCK
PHASE
LANGUAGE To choose the language in which the
control names are displayed.
SETUP
LANGUAGE
ENGLISH
OSD POSITION
ELAPSED TIME
48.3kHz / 60.0Hz
PRESET MODE
0H
OSD POSITION To adjust position of the OSD window
on the screen.
ELAPSED TIME To display the use time of monitor
A7
Video Memory Modes
The monitor has 30 memory locations for display modes, 14 of which are
factory preset to popular video modes.
Display Modes (Resolution)
Display Modes (Resolution)
10
11
12
13
14
VGA
VGA
VGA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
Horizontal Freq.(kHz)
31.47
31.47
31.47
35.00
37.86
37.50
35.16
37.88
48.08
46.88
49.72
48.36
56.48
60.02
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
Vertical Freq.(Hz)
70
70
60
67
73
75
56
60
72
75
75
60
70
75
Note : This LCD monitor has been pre-adjusted to the video mode of
VESA 1024x768 @75Hz.
User Modes
Modes 15-30 are empty and can accept new video data. If the monitor detects a
new video mode that has not been present before or is not one of the preset
modes, it stores the new mode automatically in one of the empty modes starting
with mode 15.
If you use up the 16 blank modes and still have more new video modes, the
monitor replaces the information in the user modes starting with mode 15.
A8
Troubleshooting
Check the following before calling for service.
Display Position is incorrect.
Push the AUTO/SET Button.
If the results are unsatisfactory, adjust the image position using the H position
and V position icon in the on screen display.
On the screen background, vertical bars or stripes are visible.
Push the AUTO/SET Button.
If the results are unsatisfactory, decrease the vertical bars or stripes using the
CLOCK icon in the on screen display.
Any horizontal noise appearing in any image or characters are
not clearly portraid.
Push the AUTO/SET Button.
If the results are unsatisfactory, decrease the horizontal bars using the PHASE
icon in the on screen display.
NO SIGNAL message.
The signal cable is not connected, or is loose. Check and secure the
connection.
OUT OF RANGE message appears.
Picture is blank.
The frequency of the signal from the video card is outside the operating range
of the monitor.
Horizontal Frequency: 31kHz-61kHz
Vertical Frequency: 56Hz-75Hz
* Use the graphics board's utility software to change the frequency setting (Refer to the
manual for graphics board).
* You can change the setup to the supported resolution using the Safe Mode (Press the
F8 key during booting the system).
The power LED is illuminated amber.
The monitor is in its display power management mode.
There is no active signal coming from the PC.
The signal cable is not fastened securely.
Check the computer power and graphics adapter configuration.
The monitor doesn't enter the power saving off mode (Amber).
Computer video signal is not VESA DPMS standard. Either the PC or the video
controller card is not using the VESA DPMS power management function.
A9
Specifications
Display
Type
Viewable Size
Pixel pitch
True color
15.1inch (38.35cm) Flat Panel Active matrix-TFT LCD,
Anti-Glare coating
15.1inch (38.35cm)
0.3 x 0.3mm
FLATRON LCD 563LE : 16, 7 million color
FLATRON LCD 563LS : 262, 144 color
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Signal Input
31 - 61kHz (Automatic)
56 - 75Hz (Automatic)
Separate TTL, Positive/Negative
15 pin D-Sub Connector
Video Input
Display Area
Input Form
Resolution
Normal
Stand-by/Suspend
Power Off
307 x 230mm / 12.1 x 9.1inch
Separate, RGB Analog, 0.714Vp-p/75ohm, Positive
VESA 1024 x 768/ 75Hz max
≤ 30W
≤ 3W
≤ 3W
Dimensions
Width
Height
Depth
38.92 cm / 15.95 inches
36.16 cm / 14.24 inches
18.24 cm / 7.18 inches
Power Input
DC 12V 3A
AC-DC Adapter
Input
Output
AC 100-240V 50-60Hz 1.2A~0.6A
DC 12V 1.5A
Weight
Net
5.2 kg (11.46 lbs)
Tilt Range
Down
Up
5˚
30˚
Environmental
Conditions
Operating Condition
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Condition
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 95 % non-Condensing
Power
Consumption
NOTE
Information in this document is subject to change without notice.
A10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2001:03:22 18:25:02
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2001:03:26 12:13:06
Page Count                      : 12

EXIF Metadata provided by EXIF.tools