LG Electronics USA LG508J LCD Monitor User Manual users manual

LG Electronics USA LCD Monitor users manual

users manual

APPENDIX G :FCC ID : BEJLG508JUSER’S MANUAL
FPD 1530 monitor user's guideP/NO.3828TUO197D(REV00-0204)Printed in Korea
iContentsUsing Your FPD 1530 Monitor.......................................1Connectingthemonitor ...............................................2Startingthemonitor ..................................................5Adjustingmonitorsettings .............................................6Externalcontrols .................................................6OSDoptions ....................................................7Softwarecontrols ...............................................10Videomodes ...................................................14Powermanagement ................................................15ENERGYSTAR ................................................15Energydeclaration ..............................................15Maintenance ......................................................16Troubleshooting ....................................................17Nopower......................................................17Nopicture ..................................................... 17Displaycolorsarewrong .........................................18Picturehasshadowsor“ghosts” ...................................18Colorisnotuniform .............................................18Imageisnotsizedorcenteredproperly..............................18Specifications......................................................19Safety, Regulatory, and Legal Information .........................21
ii
1www.gateway.comUsing YourFPD 1530MonitorThe FPD 1530 monitor is a high-resolution color LCD with:■ 1024 × 768 maximum resolution■Over 16 million colors■Excellent contrast and legibility■Space-saving and lightweight design■Reduced power usage
2Using Your FPD 1530 Monitorwww.gateway.comConnecting the monitorTo connect the monitor:1Position the computer and the monitor so you can easily reach the back panel of each.2Set the monitor upright, then feed the power cable and the attached video cable through the hole in the stand.3Lay the monitor on its back.
3Connecting the monitorwww.gateway.com4Connect the power cord to the power connector on the underside of the monitor.5Return the monitor to its upright position.6Make sure your computer is turned off, then connect the end of the attached video cable to the matching video port on the back of your computer.
4Using Your FPD 1530 Monitorwww.gateway.com7Plug the other end of the power cord into a properly grounded electrical outlet.
5Starting the monitorwww.gateway.comStarting the monitorTo start the monitor:1Press the power button on the monitor. The LED on the button turns on.2Turn on the computer.3After the computer is running, the LED on the monitor power button should be green. Allow about 10 seconds for the display image to appear. If the power LED is not green or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 17.4Adjust the tilt of the monitor for the best viewing angle.5Adjust the controls to get the best picture. After you see the Windows desktop, press the AUTO/SET button to automatically adjust your display image to the ideal settings. Adjust other monitor settings by using the on-screen display (OSD). For more information, see “Adjusting monitor settings” on page 6.Important When adjusting your monitor settings,always press theAUTO/SET button before entering the OSD. This willautomatically adjust your display image to the idealsettings for the current screen resolution.The best screen resolution is 1024 × 768.Power buttonand LED
6Using Your FPD 1530 Monitorwww.gateway.comAdjusting monitor settingsYou can adjust your display image by using external controls (located on the monitor itself) and software controls (accessible in Windows). For more information about software controls, see “Software controls” on page 10.External controlsThis monitor features an on-screen display (OSD) that lets you adjust and save contrast, brightness, and other settings for the monitor. The monitor saves changes you make to the settings, even if you turn off the monitor.■OSD. Press to view the OSD. Press again to exit.■Arrows.OSD active: Press to select or adjust OSD options.OSD inactive: Press and to adjust the contrast. Press and to adjust the brightness.■Auto/Set.OSD active: Press to enter a selection in the OSD.OSD inactive: Press the AUTO/SET button to automatically optimize your monitor’s position, clock, and phase.Menu selection arrowsOSD button AUTO/SET button
7Adjusting monitor settingswww.gateway.comOSD optionsTo adjust the OSD settings:1Press the OSD button. The OSD menu opens.2Use the and buttons to highlight a control, then press the AUTO/SET button.3Use the buttons to adjust the control to the desired level.4When you have finished making all adjustments, press the OSD button to exit the OSD.OSD menusYou can access any of these menus in the OSD:OSD Adjust DescriptionBrightness. Press the andbuttons to adjust the brightnessof the screen. Maximize the life ofyour monitor by using the lowestbrightness setting you arecomfortable with.You may need to readjustbrightness after the monitor haswarmed up.Contrast. Press the andbuttons to adjust the contrast ofthe screen.
8Using Your FPD 1530 Monitorwww.gateway.comPreset. Press the andbuttons to adjust the colortemperature.9300Kis bluish white.6500Kis reddish white (default).Red, Green, Blue. Press theand buttons to customizeyour color levels.Vertical position. Press theand buttons to movetheimage up and down.Horizontal position. Press theand buttons to movetheimage left and right.TheAutofunctionconfiguresthevertical and horizontal position foryou. For more information on theAuto function,see “Externalcontrols” on page 6.OSD Adjust Description
9Adjusting monitor settingswww.gateway.comClock. Press the andbuttons to minimize any verticalbars or stripes visible on thescreen background. Thehorizontal screen size will alsochange.Phase. Press the andbuttons to remove any horizontaldistortion and clear or sharpenthe image of characters.Language. Press the andbuttons to change the OSDlanguage monitor setting.OSD Position. Press theand buttons to adjust theOSD window position on thescreen.OSD Adjust Description/
10Using Your FPD 1530 Monitorwww.gateway.comSoftware controlsAdjusting the color depth and screen resolution are two of the most basic monitor settings you may need to change.Adjusting the color depthColor depth is the number of colors your monitor uses. Different image types require various color depths for optimum appearance on your monitor. For example, simple color drawings may appear adequately in 256 colors while color photographs need millions of colors to be displayed with optimum quality.Windows lets you choose from several color depth settings for your monitor. We recommend that the 32-bit True Color setting be used at all times.If the color in your images seems “false” or “jumpy,” especially after you have played a game or run a video-intensive program, check the color depth setting and return it to 32-bit True Color, if necessary.To change the color depth:1In Windows XP, click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Appearance and Themes.- OR -In Windows 2000, click Start, Settings, then click Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties dialog box opens.
11Adjusting monitor settingswww.gateway.com3Click the Settings tab.4Click the arrow button to open the Color quality or Colors list, then click the color depth you want.5To save your changes in Windows XP, click OK, then click Yes.- OR -To save your changes in Windows 2000, click OK, then click OK againHelp andSupport For more information about adjusting monitor settings inWindows XP, clickStart,then clickHelp and Support.Type the keyword changing display settings in theHelpSpot Search box ,then clickthe arrow.
12Using Your FPD 1530 Monitorwww.gateway.comAdjusting the screen resolutionYou can change the screen resolution to a size you prefer. For example, you can increase the resolution to fit more icons on your desktop, or you can decrease the resolution to make reading and identifying objects on the monitor easier. The higher the resolution, the smaller individual components of the screen (such as icons and menu bars) appear.To change the screen resolution:1In Windows XP, click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Appearance and Themes.- OR -In Windows 2000, click Start, Settings, then click Control Panel. The Control Panel window opens.2Click/Double-click the Display icon. The Display Properties dialog box opens.Important The best screen resolution setting for your monitor is1024 × 768.
13Adjusting monitor settingswww.gateway.com3Click the Settings tab.4Drag the Screen resolution or Screen area slider to the size you prefer.5To save your changes in Windows XP, click OK, then click Yes.- OR -To save your changes in Windows 2000, click OK, then click OK again.Help andSupport For more information about adjusting screen resolution inWindows XP, clickStart,then clickHelp and Support.Type the keyword changing screen resolution in theHelpSpot Search box ,then clickthe arrow.
14Using Your FPD 1530 Monitorwww.gateway.comVideo modesYour monitor supports several video modes.■ Best screen resolution is 1024 × 768.The supported video modes are:If you do not use the best mode for your monitor, the display image may look slightly “fuzzy” or may have a black border around the edges.Resolution (display mode) Horizontal Frequency Vertical Frequency1 640 × 480 31.47 kHz 60 Hz2 640 × 480 37.5 kHz 75 Hz3 720 × 400 31.47 kHz 70 Hz4 800 × 600 37.88 kHz 60 Hz5 800 × 600 46.88 kHz 75 Hz6 1024 ×768(best display mode) 48.36 kHz 60 Hz
15Power managementwww.gateway.comPower managementENERGY STARAs an ENERGY STAR® Partner, Gateway has determined that this product meets the ENERGY STAR guidelines for energy efficiency.This monitor complies with the EPA's International ENERGY STAR Program, which is a program designed to encourage manufacturers of computer equipment to build circuitry into their products to reduce energy consumption during time of non-use.Energy declarationWhen connected to a computer that supports the VESA Display Power Management Signaling (DPMS) Protocol, this monitor can conserve significant energy by reducing power consumption during periods of non-use. When the computer goes into the energy saving mode, the monitor will then enter the Active Off mode (different from total shut down). In the Active Off mode the Power LED will still show amber.By following these conventions the power can be reduced to the following levels:To “wake” the monitor when it is in Active Off mode, move your mouse or press any keyboard key.You can change the period of time after which the monitor enters these low power states by accessing the power management options in the Control Panel.VESA State LED Indicator Power ConsumptionOn Green <35 WActiveOff Amber <5 W
16Using Your FPD 1530 Monitorwww.gateway.comMaintenanceTo keep your monitor in optimal working order:■Do not block the ventilation holes.■Do not expose the monitor to rain or use near water.■Keep the monitor away from radiators or heat vents.■Keep the monitor out of direct sunlight.Clean the monitor using a soft cloth lightly moistened with water only. Wipe the cabinet, screen, and controls.Caution Do not use any type of abrasive pad or glass cleaner. Youwill permanently scratch the screen.
17Troubleshootingwww.gateway.comTroubleshootingIf you have problems with your monitor, the information in this troubleshooting section may help you solve them.No power■Make sure the power cord is properly connected to both the back of the monitor and the wall outlet. For more information about connecting the power cord, see “Connecting the monitor” on page 2.No picture■Make sure the power cord is properly connected to both the back of the monitor and the wall outlet. For more information about connecting the power cord, see “Connecting the monitor” on page 2.■Make sure the video cable is securely connected to the back of the monitor and computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2.■Make sure the monitor power button is turned on.■If the power saving indicator is orange:■Make sure that the computer is turned on.■Move the mouse or press any key on the keyboard to bring the monitor out of Active Off mode.■Restart the computer with the monitor turned on.■Check the video port and the end of the video cable for any pins that might be bent or pushed in.■Make sure that the video cable is not damaged.■Perform a monitor self-test by turning off your monitor and unplugging the video cable from the back of the computer. Turn the monitor back on and wait for ten seconds. If the monitor is functioning correctly, a self-diagnostic screen appears.Important Make sure the monitor has warmed up for approximately30 minutes before making any judgments about the picturequality.
18Using Your FPD 1530 Monitorwww.gateway.comDisplaycolorsarewrong■Press the AUTO/SET button to automatically adjust your display image to the ideal settings.■Restart the system with the monitor turned on.■Make sure that the video cable is not damaged.■Check the video port and the end of the video cable for any pins that might be bent or pushed in.■Make sure the video cable is securely connected to the back of the monitor and computer.Picture has shadows or “ghosts”■Press the AUTO/SET button to automatically adjust your display image to the ideal settings.■Remove any extension cables or switchboxes.■Make sure the video cable is securely connected to the back of the monitor and computer.■Check the video port and the end of the video cable for any pins that might be bent or pushed in.■Make sure that the video cable is not damaged.Color is not uniform■Make sure the monitor warms up for at least 30 minutes before making a final judgment about color uniformity or brightness.■Press the AUTO/SET button to automatically adjust your display image to the ideal settings.Image is not sized or centered properly■Press the AUTO/SET button to automatically adjust your display image to the ideal settings.■Use the position controls to adjust the image. For instructions on how to change your monitor settings, see “Adjusting monitor settings” on page 6.
19Specificationswww.gateway.comSpecificationsSpecifications are subject to change without notice or obligation.Many products for Gateway and its subsidiaries are custom engineered by our suppliers to Gateway specifications and may vary from similarly marketed products.Monitor 15-inch flat panel active-matrix TFT (Thin Film Transistor)LCDBest screen resolution 1024 × 768Display colors Over 16 million colorsPower input AC 100 – 240 V 50/60 Hz0.6 APower consumption Normal operation:<35 WActive Off operation:<5 WDimensions(WXHXD) 14.96 × 14.45 × 8.07 inch(38.0 × 36.7 × 20.5 cm)Power management Meets EPA ENERGY STAR®and VESA DPMSrequirementsCertifications UL, C-UL, FCC Class B, NOM
20Using Your FPD 1530 Monitorwww.gateway.com
21www.gateway.comSafety,Regulatory, andLegal InformationImportant safety informationYour Gateway system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.Settingupyoursystem■Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.■Do not use this product near water or a heat source such as a radiator.■Set up the system on a stable work surface.■The product should only be operated from the type of power source indicated on the rating label.■If your product has a voltage selector switch, make sure that the switch is in the proper position for your area. The voltage selector switch is set at the factory to the correct voltage.■Openings in the monitor case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the monitor ventilation openings.Warning Always follow these instructions to help guard againstpersonal injury and damage to your Gateway system.
22Appendix : Safety, Regulatory, and Legal Informationwww.gateway.com■Some products are equipped with a three-wire power cord to make sure that the product is properly grounded when in use. The plug on this cord will only fit into a grounding-type outlet. This is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician to install the appropriate outlet.■If you use an extension cord with this system, make sure that the total ampere rating on the products plugged into the extension cord does not exceed the extension cord ampere rating.■If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and buildup of static charges.Care during use■Do not walk on the power cord or allow anything to rest on it.■Do not spill anything on the system. The best way to avoid spills is to avoid eating and drinking near your system.■Do not expose the monitor to rain or use near water. If the monitor does get exposed to moisture, unplug it and allow it to dry for 24 hours. Call Gateway Technical Support for advice on whether the monitor is safe to turn back on.■When the monitor is turned off, a small amount of electrical current still flows through the monitor. To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before cleaning the system.■Unplug the system from the wall outlet and refer servicing to qualified personnel if:■The power cord or plug is damaged.■Liquid has been spilled into the system.■The system does not operate properly when the operating instructions are followed.■The system was dropped or the cabinet is damaged.■The system performance changes.Replacement parts and accessoriesUse only replacement parts and accessories recommended by Gateway.Warning To prevent electric shock, never removethecover. Nouser serviceable parts inside. Refer servicing to qualifiedservice personnel.Important Do not use Gateway products in areas classified ashazardous locations. Such areas include patient careareas of medical and dental facilities,oxygen-ladenenvironments,or industrial facilities.
23Regulatory compliance statementswww.gateway.comRegulatory compliance statementsUnited States of AmericaFederal Communications Commission (FCC)Unintentional emitter per FCC Part 15This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:■Reorient or relocate the receiving antenna■Increase the separation between the equipment and receiver■Connect the equipment to an outlet on a different circuit from that to which the receiver is connected■Consult the dealer or an experienced radio/TV technician for help.Compliance Accessories: The accessories associated with this equipment are: shielded video cable. These accessories are required to be used in order to ensure compliance with FCC rules.FCC declaration of conformityResponsible party:Gateway Companies, Inc.610 Gateway Drive, North Sioux City, SD 57049(605) 232-2000 Fax: (605) 232-2023This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution Changes or modifications not expressly approved byGateway could void the FCC compliance and negate yourauthority to operate the product.
24Appendix : Safety, Regulatory, and Legal Informationwww.gateway.comCanadaIndustry Canada (IC)Unintentional emitter per ICES-003This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada.Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.EPA ENERGY STARAs an ENERGY STAR® Partner, Gateway has determined that this product meets the ENERGY STAR guidelines for energy efficiency when used with a computer equipped with a Display Power Management System.
25Noticeswww.gateway.comNoticesCopyright ©2002 Gateway,Inc.All Rights Reserved14303 Gateway PlacePoway,CA 92064 USAAll Rights ReservedThis publication is protected by copyright and all rights are reserved. No part of it may be reproduced ortransmitted by any means or in any form,without prior consent in writing from Gateway.The information in this manual has been carefully checked and is believed to be accurate. However,changes aremade periodically. These changes are incorporated in newer publication editions. Gateway may improve and/orchange products described in this publication at any time. Due to continuing system improvements,Gateway isnot responsible for inaccurate information which may appear in this manual. For the latest product updates,consult the Gateway Web site at www.gateway.com.Innoevent will Gateway be liable for direct,indirect,special,exemplary,incidental,or consequential damages resulting from any defect or omission in this manual,even if advised of the possibility of such damages.In the interest of continued product development,Gateway reserves the right to makeimprovements in thismanual and the products it describes at any time,without notices or obligation.Trademark Acknowledgments1-800-GATEWAY,ActiveCPR, ALR, AnyKey,black-and-white spot design,CrystalScan,Destination,DestiVu,EZ Pad, EZ Point,Field Mouse,Gateway 2000,Gateway Country,gateway.net,Gateway stylized logo,PerfectScholar,Solo,TelePath,Vivitron,stylized “G” design,and “You’ve got a friend in the business” slogan areregistered trademarks and black-and-white spotted box logo,GATEWAY,Gateway Astro,Gateway@Work,Gateway Connected touch pad,Gateway Connected music player,Gateway Cyber:)Ware,GatewayEducation:)Ware,Gateway Flex Case,Gateway Gaming:)Ware,Gateway GoBack, Gateway Gold,GatewayLearning:)Ware,Gateway Magazine,Gateway Micro Server,Gateway Money:)Ware,Gateway Music:)Ware,Gateway Networking Solutions,Gateway Online Network(O.N.)solution,Gateway Photo:)Ware,GatewayProfessional PCs,Gateway Profile,Gateway Solo,green stylized GATEWAY,green stylized Gateway logo,Gateway Teacher:)Ware,Gateway Video:)Ware,HelpSpot,InforManager,Just clickit!, Learn@Gateway,KidsBackPack, SERVE-TO-ORDER,Server Watchdog,SpotShop,Spotshop.com,and Your:)Ware are trademarksof Gateway,Inc. Intel,Intel Inside logo,and Pentium are registered trademarks and MMXis a trademarkof IntelCorporation. Microsoft,MS,MS-DOS,and Windows are trademarks or registered trademarksofMicrosoftCorporation. All other product names mentioned herein are used for identification purposes only,and may be thetrademarks or registered trademarks of their respective companies.
26Appendix : Safety, Regulatory, and Legal Informationwww.gateway.com

Navigation menu