LG Electronics USA LG508J LCD Monitor User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	237460
Application ID	jhKalRWcaU9UioCeHg0Hyg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.94kB (1786742 bits)
Date Submitted	2002-04-18 00:00:00
Date Available	2002-04-16 00:00:00
Creation Date	2002-04-15 09:42:19
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-04-15 12:49:52
Document Title	users manual

FCC ID : BEJLG508J
APPENDIX G :
USER’S MANUAL
FPD 1530 monitor user's guide
P/NO.3828TUO197D(REV00-0204)
Printed in Korea
Contents
Using Your FPD 1530 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Connecting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Starting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
External controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OSD options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Software controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Video modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Energy declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
No power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Display colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Image is not sized or centered properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . 21
ii
Using Your
FPD 1530
Monitor
The FPD 1530 monitor is a high-resolution color LCD with:
■
1024 × 768 maximum resolution
■
Over 16 million colors
■
Excellent contrast and legibility
■
Space-saving and lightweight design
■
Reduced power usage
www.gateway.com
Using Your FPD 1530 Monitor
Connecting the monitor
To connect the monitor:
Position the computer and the monitor so you can easily reach the back
panel of each.
Set the monitor upright, then feed the power cable and the attached video
cable through the hole in the stand.
Lay the monitor on its back.
www.gateway.com
Connecting the monitor
Connect the power cord to the power connector on the underside of the
monitor.
Return the monitor to its upright position.
Make sure your computer is turned off, then connect the end of the
attached video cable to the matching video port on the back of your
computer.
www.gateway.com
Using Your FPD 1530 Monitor
Plug the other end of the power cord into a properly grounded electrical
outlet.
www.gateway.com
Starting the monitor
Starting the monitor
To start the monitor:
Press the power button on the monitor. The LED on the button turns on.
Power button
and LED
Turn on the computer.
Adjust the tilt of the monitor for the best viewing angle.
After the computer is running, the LED on the monitor power button
should be green. Allow about 10 seconds for the display image to appear.
If the power LED is not green or you do not see a display image, check
the connections. For more troubleshooting information, see
“Troubleshooting” on page 17.
Adjust the controls to get the best picture. After you see the Windows
desktop, press the AUTO/SET button to automatically adjust your display
image to the ideal settings. Adjust other monitor settings by using the
on-screen display (OSD). For more information, see “Adjusting monitor
settings” on page 6.
Important
When adjusting your monitor settings, always press the
AUTO/SET button before entering the OSD. This will
automatically adjust your display image to the ideal
settings for the current screen resolution.
The best screen resolution is 1024 × 768.
www.gateway.com
Using Your FPD 1530 Monitor
Adjusting monitor settings
You can adjust your display image by using external controls (located on the
monitor itself) and software controls (accessible in Windows). For more
information about software controls, see “Software controls” on page 10.
External controls
This monitor features an on-screen display (OSD) that lets you adjust and save
contrast, brightness, and other settings for the monitor. The monitor saves
changes you make to the settings, even if you turn off the monitor.
OSD button
AUTO/SET button
Menu selection arrows
■
OSD. Press to view the OSD. Press again to exit.
■
Arrows.
OSD active: Press to select or adjust OSD options.
OSD inactive: Press
and
to adjust the contrast. Press
adjust the brightness.
■
and
to
Auto/Set.
OSD active: Press to enter a selection in the OSD.
OSD inactive: Press the AUTO/SET button to automatically optimize your
monitor’s position, clock, and phase.
www.gateway.com
Adjusting monitor settings
OSD options
To adjust the OSD settings:
Press the OSD button. The OSD menu opens.
Use the
Use the
button.
and
buttons to highlight a control, then press the AUTO/SET
buttons to adjust the control to the desired level.
When you have finished making all adjustments, press the OSD button
to exit the OSD.
OSD menus
You can access any of these menus in the OSD:
OSD Adjust
Description
Brightness. Press the
and
buttons to adjust the brightness
of the screen. Maximize the life of
your monitor by using the lowest
brightness setting you are
comfortable with.
You may need to readjust
brightness after the monitor has
warmed up.
Contrast. Press the
and
buttons to adjust the contrast of
the screen.
www.gateway.com
Using Your FPD 1530 Monitor
OSD Adjust
Description
Preset. Press the
and
buttons to adjust the color
temperature.
9300K is bluish white.
6500K is reddish white (default).
Red, Green, Blue. Press the
and
buttons to customize
your color levels.
Vertical position. Press the
and
buttons to move the
image up and down.
Horizontal position. Press the
and
buttons to move the
image left and right.
The Auto function configures the
vertical and horizontal position for
you. For more information on the
Auto function, see “External
controls” on page 6.
www.gateway.com
Adjusting monitor settings
OSD Adjust
Description
Clock. Press the
and
buttons to minimize any vertical
bars or stripes visible on the
screen background. The
horizontal screen size will also
change.
Phase. Press the
and
buttons to remove any horizontal
distortion and clear or sharpen
the image of characters.
Language. Press the
and
buttons to change the OSD
language monitor setting.
OSD Position. Press the
and
buttons to adjust the
OSD window position on the
screen.
www.gateway.com
Using Your FPD 1530 Monitor
Software controls
Adjusting the color depth and screen resolution are two of the most basic
monitor settings you may need to change.
Adjusting the color depth
Color depth is the number of colors your monitor uses. Different image types
require various color depths for optimum appearance on your monitor. For
example, simple color drawings may appear adequately in 256 colors while
color photographs need millions of colors to be displayed with optimum
quality.
Windows lets you choose from several color depth settings for your monitor.
We recommend that the 32-bit True Color setting be used at all times.
If the color in your images seems “false” or “jumpy,” especially after you have
played a game or run a video-intensive program, check the color depth setting
and return it to 32-bit True Color, if necessary.
To change the color depth:
In Windows XP, click Start, then click Control Panel. The Control Panel
window opens. If your Control Panel is in Category View, click
Appearance and Themes.
- OR In Windows 2000, click Start, Settings, then click Control Panel. The
Control Panel window opens.
10
Click/Double-click the Display icon. The Display Properties dialog box
opens.
www.gateway.com
Adjusting monitor settings
Click the Settings tab.
Click the arrow button to open the Color quality or Colors list, then click
the color depth you want.
To save your changes in Windows XP, click OK, then click Yes.
- OR To save your changes in Windows 2000, click OK, then click OK again
Help and
Support
For more information about adjusting monitor settings in
Windows XP, click Start, then click Help and Support.
Type the keyword changing display settings in the
HelpSpot Search box
, then click
the arrow.
www.gateway.com
11
Using Your FPD 1530 Monitor
Adjusting the screen resolution
You can change the screen resolution to a size you prefer. For example, you
can increase the resolution to fit more icons on your desktop, or you can
decrease the resolution to make reading and identifying objects on the
monitor easier. The higher the resolution, the smaller individual components
of the screen (such as icons and menu bars) appear.
Important
The best screen resolution setting for your monitor is
1024 × 768.
To change the screen resolution:
In Windows XP, click Start, then click Control Panel. The Control Panel
window opens. If your Control Panel is in Category View, click
Appearance and Themes.
- OR In Windows 2000, click Start, Settings, then click Control Panel. The
Control Panel window opens.
12
Click/Double-click the Display icon. The Display Properties dialog box
opens.
www.gateway.com
Adjusting monitor settings
Click the Settings tab.
Drag the Screen resolution or Screen area slider to the size you prefer.
To save your changes in Windows XP, click OK, then click Yes.
- OR To save your changes in Windows 2000, click OK, then click OK again.
Help and
Support
For more information about adjusting screen resolution in
Windows XP, click Start, then click Help and Support.
Type the keyword changing screen resolution in the
HelpSpot Search box
, then click
the arrow.
www.gateway.com
13
Using Your FPD 1530 Monitor
Video modes
Your monitor supports several video modes.
■
Best screen resolution is 1024 × 768.
The supported video modes are:
Resolution
(display mode)
Horizontal
Frequency
Vertical
Frequency
640 × 480
31.47 kHz
60 Hz
640 × 480
37.5 kHz
75 Hz
720 × 400
31.47 kHz
70 Hz
800 × 600
37.88 kHz
60 Hz
800 × 600
46.88 kHz
75 Hz
1024 × 768
(best display mode)
48.36 kHz
60 Hz
If you do not use the best mode for your monitor, the display image may
look slightly “fuzzy” or may have a black border around the edges.
14
www.gateway.com
Power management
Power management
ENERGY STAR
As an ENERGY STAR® Partner, Gateway has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
This monitor complies with the EPA's International ENERGY STAR Program,
which is a program designed to encourage manufacturers of computer
equipment to build circuitry into their products to reduce energy
consumption during time of non-use.
Energy declaration
When connected to a computer that supports the VESA Display Power
Management Signaling (DPMS) Protocol, this monitor can conserve
significant energy by reducing power consumption during periods of non-use.
When the computer goes into the energy saving mode, the monitor will then
enter the Active Off mode (different from total shut down). In the Active Off
mode the Power LED will still show amber.
By following these conventions the power can be reduced to the following
levels:
VESA State
LED Indicator
Power Consumption
On
Green
<35 W
Active Off
Amber
<5 W
To “wake” the monitor when it is in Active Off mode, move your mouse or
press any keyboard key.
You can change the period of time after which the monitor enters these low
power states by accessing the power management options in the Control
Panel.
www.gateway.com
15
Using Your FPD 1530 Monitor
Maintenance
To keep your monitor in optimal working order:
■
Do not block the ventilation holes.
■
Do not expose the monitor to rain or use near water.
■
Keep the monitor away from radiators or heat vents.
■
Keep the monitor out of direct sunlight.
Clean the monitor using a soft cloth lightly moistened with water only. Wipe
the cabinet, screen, and controls.
Caution
16
Do not use any type of abrasive pad or glass cleaner. You
will permanently scratch the screen.
www.gateway.com
Troubleshooting
Troubleshooting
If you have problems with your monitor, the information in this
troubleshooting section may help you solve them.
Important
Make sure the monitor has warmed up for approximately
30 minutes before making any judgments about the picture
quality.
No power
■
Make sure the power cord is properly connected to both the back of the
monitor and the wall outlet. For more information about connecting the
power cord, see “Connecting the monitor” on page 2.
No picture
■
Make sure the power cord is properly connected to both the back of the
monitor and the wall outlet. For more information about connecting the
power cord, see “Connecting the monitor” on page 2.
■
Make sure the video cable is securely connected to the back of the
monitor and computer. For more information about connecting the
video cable, see “Connecting the monitor” on page 2.
■
Make sure the monitor power button is turned on.
■
If the power saving indicator is orange:
■
■
Make sure that the computer is turned on.
■
Move the mouse or press any key on the keyboard to bring the
monitor out of Active Off mode.
■
Restart the computer with the monitor turned on.
■
Check the video port and the end of the video cable for any pins
that might be bent or pushed in.
■
Make sure that the video cable is not damaged.
Perform a monitor self-test by turning off your monitor and unplugging
the video cable from the back of the computer. Turn the monitor back
on and wait for ten seconds. If the monitor is functioning correctly, a
self-diagnostic screen appears.
www.gateway.com
17
Using Your FPD 1530 Monitor
Display colors are wrong
■
Press the AUTO/SET button to automatically adjust your display image to
the ideal settings.
■
Restart the system with the monitor turned on.
■
Make sure that the video cable is not damaged.
■
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
■
Make sure the video cable is securely connected to the back of the
monitor and computer.
Picture has shadows or “ghosts”
■
Press the AUTO/SET button to automatically adjust your display image to
the ideal settings.
■
Remove any extension cables or switchboxes.
■
Make sure the video cable is securely connected to the back of the
monitor and computer.
■
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
■
Make sure that the video cable is not damaged.
Color is not uniform
■
Make sure the monitor warms up for at least 30 minutes before making
a final judgment about color uniformity or brightness.
■
Press the AUTO/SET button to automatically adjust your display image to
the ideal settings.
Image is not sized or centered properly
18
■
Press the AUTO/SET button to automatically adjust your display image to
the ideal settings.
■
Use the position controls to adjust the image. For instructions on how
to change your monitor settings, see “Adjusting monitor settings” on
page 6.
www.gateway.com
Specifications
Specifications
Specifications are subject to change without notice or obligation.
Monitor
15-inch flat panel active-matrix TFT (Thin Film Transistor)
LCD
Best screen resolution
1024 × 768
Display colors
Over 16 million colors
Power input
AC 100 – 240 V 50/60 Hz 0.6 A
Power consumption
Normal operation: <35 W
Active Off operation: <5 W
Dimensions(WXHXD)
14.96 × 14.45 × 8.07 inch
(38.0 × 36.7 × 20.5 cm)
Power management
Meets EPA ENERGY STAR® and VESA DPMS
requirements
Certifications
UL, C-UL, FCC Class B, NOM
Many products for Gateway and its subsidiaries are custom engineered by our
suppliers to Gateway specifications and may vary from similarly marketed
products.
www.gateway.com
19
Using Your FPD 1530 Monitor
20
www.gateway.com
Safety,
Regulatory, and
Legal Information
Important safety information
Your Gateway system is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that the
safety instructions marked on the product and in the documentation are followed.
Warning
Always follow these instructions to help guard against
personal injury and damage to your Gateway system.
Setting up your system
■
Read and follow all instructions marked on the product and in the documentation before you
operate your system. Retain all safety and operating instructions for future use.
■
Do not use this product near water or a heat source such as a radiator.
■
Set up the system on a stable work surface.
■
The product should only be operated from the type of power source indicated on the rating
label.
■
If your product has a voltage selector switch, make sure that the switch is in the proper
position for your area. The voltage selector switch is set at the factory to the correct voltage.
■
Openings in the monitor case are provided for ventilation. Do not block or cover these
openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system
for ventilation when you set up your work area. Never insert objects of any kind into the
monitor ventilation openings.
www.gateway.com
21
Appendix : Safety, Regulatory, and Legal Information
■
Some products are equipped with a three-wire power cord to make sure that the product is
properly grounded when in use. The plug on this cord will only fit into a grounding-type
outlet. This is a safety feature. If you are unable to insert the plug into an outlet, contact an
electrician to install the appropriate outlet.
■
If you use an extension cord with this system, make sure that the total ampere rating on the
products plugged into the extension cord does not exceed the extension cord ampere rating.
■
If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and buildup of static charges.
Care during use
■
Do not walk on the power cord or allow anything to rest on it.
■
Do not spill anything on the system. The best way to avoid spills is to avoid eating and
drinking near your system.
■
Do not expose the monitor to rain or use near water. If the monitor does get exposed to
moisture, unplug it and allow it to dry for 24 hours. Call Gateway Technical Support for advice
on whether the monitor is safe to turn back on.
■
When the monitor is turned off, a small amount of electrical current still flows through the
monitor. To avoid electrical shock, always unplug all power cables and modem cables from the
wall outlets before cleaning the system.
■
Unplug the system from the wall outlet and refer servicing to qualified personnel if:
■
The power cord or plug is damaged.
■
Liquid has been spilled into the system.
■
The system does not operate properly when the operating instructions are followed.
■
The system was dropped or the cabinet is damaged.
■
The system performance changes.
Warning
To prevent electric shock, never remove the cover. No
user serviceable parts inside. Refer servicing to qualified
service personnel.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
Important
22
Do not use Gateway products in areas classified as
hazardous locations. Such areas include patient care
areas of medical and dental facilities, oxygen-laden
environments, or industrial facilities.
www.gateway.com
Regulatory compliance statements
Regulatory compliance statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
■
Reorient or relocate the receiving antenna
■
Increase the separation between the equipment and receiver
■
Connect the equipment to an outlet on a different circuit from that to which the receiver is
connected
■
Consult the dealer or an experienced radio/TV technician for help.
Compliance Accessories: The accessories associated with this equipment are: shielded video
cable. These accessories are required to be used in order to ensure compliance with FCC rules.
FCC declaration of conformity
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Caution
Changes or modifications not expressly approved by
Gateway could void the FCC compliance and negate your
authority to operate the product.
www.gateway.com
23
Appendix : Safety, Regulatory, and Legal Information
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage
radioélectrique édicté par Industrie Canada.
EPA ENERGY STAR
As an ENERGY STAR® Partner, Gateway has determined that this product
meets the ENERGY STAR guidelines for energy efficiency when used with
a computer equipped with a Display Power Management System.
24
www.gateway.com
Notices
Notices
Copyright © 2002 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or
transmitted by any means or in any form, without prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However, changes are
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or
change products described in this publication at any time. Due to continuing system improvements, Gateway is
not responsible for inaccurate information which may appear in this manual. For the latest product updates,
consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect,
special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,
even if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make improvements in this
manual and the products it describes at any time, without notices or obligation.
Trademark Acknowledgments
1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu,
EZ Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work,
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware,
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo,
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids
BackPack, SERVE-TO-ORDER, Server Watchdog, SpotShop, Spotshop.com, and Your:)Ware are trademarks
of Gateway, Inc. Intel, Intel Inside logo, and Pentium are registered trademarks and MMX is a trademark of Intel
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered trademarks of Microsoft
Corporation. All other product names mentioned herein are used for identification purposes only, and may be the
trademarks or registered trademarks of their respective companies.
www.gateway.com
25
Appendix : Safety, Regulatory, and Legal Information
26
www.gateway.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:04:15 09:42:19
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2002:04:15 12:49:52-04:00
Page Count                      : 30

EXIF Metadata provided by EXIF.tools