LG Electronics USA LGE-MEDIA-SB1 RF Remote controller with BLE User Manual H User s Manual

LG Electronics USA RF Remote controller with BLE H User s Manual

User Manual

Order Number : GETEC-C1-16-270 FCC Part 15 subpart C Test Report Number : GETEC-E3-16-029 Page 1 / 1 EUT Type: RF Remote controller FCC ID.: BEJ-LGE-MEDIA-SB1 APPENDIX H : USER’S MANUAL
Table of Contents1. Overview and specification of the remote control(1) Overview(2) Specification2. Precautions3. Customer SupportEnglish
1. Overview and Specifications for the Remote Control(1) Overview- Instructions for using the Magic Remote control are in the TV manual. This remote uses RF(Radio Frequency) instead of IR (InfraRed light).This remote will operate within 10m of the tv and does not require it be pointed at the tv.(2) SpecificationsCategories DetailsModel No. LGE-MEDIA-SB1Range of frequency 2.402 GHz ~ 2.480 GHzChannel 40 channelsReception sensitivity -94.5 dBmDimensionsWidth 43.6 x Thickness 19.4 x Length 135.4 (tolerance of ±0.8 mm)Weight 55g ±10 g (excluding battery)Power source 3V (Alkaline battery AAA x 2)Operational temperature range -20 ℃~ 60 ℃
2. Precautions(1) After replacement of the battery, use the remote control following pairing in accordance with user manual.(2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the user manual.(3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit. (4) Do not dismantle or exert heat to the battery.(5) Do not drop battery or exert extreme impact that may even cause the case to be damaged. (6) Do not immerse the battery in water.(7) There is danger of explosion if a the battery is inserted reversely.(8) Properly dispose of used batteries.3. Customer SupportRefer to the contact number for services provided in the Set-top Manual.
4. FCC StatementFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.5. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.This remote device is approved as a hand-held and hand-operated only portable (relative to hand) device which is normally operated at 5 mm from a person's body.

Navigation menu