LG Electronics USA LGE-MEDIA-SB1 RF Remote controller with BLE User Manual H User s Manual
LG Electronics USA RF Remote controller with BLE H User s Manual
User Manual
Order Number : GETEC-C1-16-270 FCC Part 15 subpart C
Test Report Number : GETEC-E3-16-029 Page 1 / 1
EUT Type: RF Remote controller
FCC ID.: BEJ-LGE-MEDIA-SB1
APPENDIX H
: USER’S MANUAL
Table of Contents
1. Overview and specification of the remote control
(1) Overview
(2) Specification
2. Precautions
3. Customer Support
English
1. Overview and Specifications for the Remote Control
(1) Overview
- Instructions for using the Magic Remote control are in the TV
manual.
This remote uses RF(Radio Frequency) instead of IR (InfraRed light).
This remote will operate within 10m of the tv and does not require
it be pointed at the tv.
(2) Specifications
Categories Details
Model No. LGE-MEDIA-SB1
Range of frequency 2.402 GHz ~ 2.480 GHz
Channel 40 channels
Reception sensitivity -94.5 dBm
Dimensions
Width 43.6 x Thickness 19.4 x
Length 135.4
(tolerance of ±0.8 mm)
Weight 55g ±10 g
(excluding battery)
Power source 3V (Alkaline battery AAA x 2)
Operational
temperature range -20 ℃~ 60 ℃
2. Precautions
(1) After replacement of the battery, use the remote control following pairing
in accordance with user manual.
(2) If the unit does not operate after replacement of battery, reattempt pairing
in accordance with the user manual.
(3) If the remote controller is not being used for prolonged period of time, it is
recommended you remove the battery from the unit.
(4) Do not dismantle or exert heat to the battery.
(5) Do not drop battery or exert extreme impact that may even cause the case
to be damaged.
(6) Do not immerse the battery in water.
(7) There is danger of explosion if a the battery is inserted reversely.
(8) Properly dispose of used batteries.
3. Customer Support
Refer to the contact number for services provided in the Set-top Manual.
4. FCC Statement
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Warning!
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user's authority to operate the equipment.
5. FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF
exposure compliance.
This remote device is approved as a hand-held and hand-operated only
portable (relative to hand) device which is normally operated at 5 mm
from a person's body.