LG Electronics USA LGSBWAC72 RF Module User Manual
LG Electronics USA RF Module
User Manual
SPECIFICATIONS PRODUCT NAME : : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME : LGSBWAC72 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved LG Innotek Co., Ltd. I.H. PARK 2016.04.26 D.S. OH 2016.04.26 S.D. CHOI 2016.04.26 DOCUMENT No. PAGE 20 (00)-0073 DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 1 / 12 Index No Description Page Features Ordering Information Label Marking Block Diagram Absolute Maximum Ratings Operating Conditions Standard Test Conditions Pin Description Mechanical Characteristics 10 Outline Drawing 11 Packing Information 12 Change History of Revision 10 13 Regulatory Notices 11 Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 2 / 12 1. Features TWCM-K305D is the small size and low power module for IEEE 802.11ac wireless LAN & BT4.2 + HS. TWCM-K305D is based on Mediatek MT7662TU solution. IEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructure Bluetooth 4.2+ HS Size : 68.0mm x 38.0 mm Two stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.11ac) WLAN Metal Press antenna, BT Printed antenna on Use on-chip OTP (One-Time Programmable) Host Interface : USB2.0 (WLAN & BT) - This model is using the common USB2.0 to control WLAN and BT Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 2. Ordering Information Model Description TWCM-K305D LGSBWAC72 802.11 a/b/g/n/ac + BT combo Module, Dual Band 2T2R MIMO 3. Label marking ① ② ③ Customer P/N TWCM-K305D 1604B260101 001EB2B00339 ④ ⑤ ① Customer P/N ④ Product Lot No. : 1604B2601 ② MAC Address BAR Code -16 : Year - 26 : Date ③ Model No - 04: Month - 01 : Manufactured Process - A :Revision No. - 01 : Change History of Revision ⑤ MAC Address No. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 3 / 12 4. Block Diagram MT7662TU 2.4GHz Control 5GHz ANT1 11ac 2T2R MAC / Baseband 2.4GHz BT ANT System 32bit RISC CPU Diplexer USB I/F 12PIN CONNECTOR ANT0 Diplexer 5GHz LPF 2.4GHz Packet buffer/ USB2.0 Security engine Interface BT Bluetooth Baseband MAC 40MHz PMU 3.3V Main Clock 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Min Max Unit Storage Temperature -20 +80 ℃ Storage Humidity (40℃) 90 < Table 1 > . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40℃ and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 4 / 12 6. Operating Conditions Parameter Min Typ Max Unit Ambient Temperature 60 ℃ Ambient Humidity (40℃) 85 Supply Voltage 3.135 3.3 3.6 Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition Temperature 25 ± 5℃ Humidity 65 ± 5% 7-2. Power supply voltages Input power Supply Voltage VDD_3.3V 3.135 ~ 3.6V 7-3. Current consumption Current Consumption Min. Typ. Max. TX Mode ( 11ac/80MHz) 480 1000 Idle and Associated state 270 300 Radio disabled state 60 70 Unit mA Note 1 : This figure is the RMS(root mean square) Value. 7-4. ESD Information Human Body Model (HBM) Min. Max. Contact ±2 Air ±15 Note 1 : IEC 61000-4-2 (150pF, 330R) ※ Test condition : After 8-pin USB Cable connect to module, progress ESD test. Copyrightⓒ. 2016. All Rights Reserved. Unit kV DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 5 / 12 8. Pin Description Pin No. Pin Name I/O Pin Description VCC Power Supply 3.3V USB D- I/O USB Communication signal USB D- USB D+ I/O USB Communication signal USB D+ GND Ground WL_HOST_WAKE Wake On WLAN VCC Power Supply 3.3V BT_REG_ON BT Regulator ON GND Ground BT_DEV _Wake BT_DEV _Wake 10 BT_HOST _Wake BT_HOST _Wake 11 GND Ground 12 GND Ground Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 6 / 12 9. Mechanical Characteristics 1) Outline view Item Assembly Appearance Test Conditions No defects of wiring, soldering and assembling No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight Copyrightⓒ. 2016. All Rights Reserved. 9.85g DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) 10. Outline Drawing Copyrightⓒ. 2016. All Rights Reserved. WC42512 REV.NO : 1.0 PAGE : 7 / 12 DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) 11. Packing Information Copyrightⓒ. 2016. All Rights Reserved. WC42512 REV.NO : 1.0 PAGE : 8 / 12 DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 9 / 12 TWCM-K305D Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 10 / 12 12. Change History of Revision Revision Date Copyrightⓒ. 2016. All Rights Reserved. Contents of Revision Change Remark DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 11 / 12 Regulatory Notices 1. FCC FCC Part 15.19 Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. OEM Responsibilities to comply with FCC and Industry Canada Regulations The module has been certified for integration into products only by OEM integrators under the following condition: - The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. - The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. As long as the two condition above is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following: “Contains FCC ID: BEJLGSBWAC72 “Contains IC: 2703H-LGSBWAC72” Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2016.04.26 SPECIFICATION REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) WC42512 REV.NO : 1.0 PAGE : 12 / 12 2. IC RSS-GEN, Sec. 7.1.3 – (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate thisequipment.Attention: Les changements ou modifications de cet appareil non expressément approuvé par le fabricant peuvent annuler votre droit à utiliser cet équipement. É tiquetage du produit final (IC) Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro de certification IC. Si l’identification FCC et le numéro de certification IC ne sont pas visibles lorsque le module est installé à l’intérieur d’un autre dispositif, la partie externe du dispositif dans lequel le module est installé devra également présenter une étiquette faisant référence au module inclus. Dans ce cas, le produit final devra être étiqueté sur une zone visible avec les informations suivantes : « Contient module émetteur identification FCC ID : BEJLGSBWAC72 « Contient module émetteur IC : 2703H-LGSBWAC72” 3. CE Hereby, ' LG Electronics USA, Inc.' declares that this LGSBWAC72 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. Copyrightⓒ. 2016. All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 13 Language : ko-KR Tagged PDF : Yes Title : 슬라이드 제목 없음 Author : 박장순 Create Date : 2016:07:15 19:50:29+09:00 Modify Date : 2016:07:15 19:50:29+09:00 Producer : Microsoft® PowerPoint® 2013 Creator : Microsoft® PowerPoint® 2013EXIF Metadata provided by EXIF.tools