LG Electronics USA LSP340 Fixed WLL Phone (CDMA) User Manual LSP340 USERMENUAL
LG Electronics USA Fixed WLL Phone (CDMA) LSP340 USERMENUAL
Users Manual
CDMA Fixed Wireless Telephone User Guide Model: LSP-340 LGE CDMA Fixed Wireless Telephone LSP-340 REVISED HISTORY DATE 2001/10/25 ISSUE ISSUE1 CONTENTS OF CHANGES Initial Release REMARK LGE CDMA Fixed Wireless Telephone LSP-340 Blank Page LGE CDMA Fixed Wireless Telephone LSP-340 CONTENTS Highlights ............................................................................................................................... 6 1. Important Information...................................................................................................... 8 1.1 Safety Information .................................................................................................. 8 1.2 Optimal Phone Performance .................................................................................. 8 1.3 Care and Service ................................................................................................... 9 2. Introduction ................................................................................................................... 10 2.1 Front View of the Telephone ................................................................................ 10 2.2 LCD Display ......................................................................................................... 11 2.3 Installation ............................................................................................................ 13 2.4 Installation Steps.................................................................................................. 15 3. Basic Operation ............................................................................................................... 16 3.1 Making a Call....................................................................................................... 16 3.2 Redialing Last Outgoing Number ........................................................................ 16 3.3 Receiving a Call ................................................................................................... 17 3.4 Signal Strength..................................................................................................... 17 3.5 Missed Call Message ........................................................................................... 17 4. List of Menu State............................................................................................................ 18 4.1 Volume / Ring...................................................................................................... 18 4.1.1 Ring Volume .............................................................................................. 18 4.1.2 Key Volume ............................................................................................... 18 4.1.3 Ear Volume................................................................................................ 19 4.1.3 Ring Type................................................................................................... 19 4.2 Additional feature ................................................................................................. 19 4.2.1 Key-tone Length........................................... Error! Bookmark not defined. 4.2.2 Minute Alert ................................................................................................ 20 4.2.3 Set Rx call mode ........................................................................................ 20 4.2.4 SIO baud rate ............................................................................................. 20 5. Functions while in a call................................................................................................... 21 5.1 Mute........................................................................................................................ 21 5.2 Ear Volume .......................................................................................................... 21 6. Searching, Editing & Dialing ............................................................................................ 21 6.1 Retrieving Phone Number by Name..................................................................... 21 6.2 Retrieving Phone Number by Address ................................................................. 22 6.3 Retrieving Phone Number by NUMBER .......................................................... 23 6.4 Fast Searching .................................................................................................... 23 6. 5 Clear Memory ........................................................................................................ 31 LGE CDMA Fixed Wireless Telephone LSP-340 7. SMS (Short Message Service) ........................................................................................ 24 7.1 Checking & Deleting Received Message ............................................................. 24 7.1.1 Text Message............................................................................................. 24 7.1.2 Voice Message........................................................................................... 25 7.1.3 Erasing all Received Message................................................................... 25 7.2 MSG Notification tone select................................................................................ 25 7.3 Message Sending ................................................................................................ 26 7.3.1 Sending a New Message ........................................................................... 26 7.3.2 Sending the sent message or message after editing the sent message.... 26 7.3.3 Erasing a sent message............................................................................. 26 8. Beside Functions ............................................................................................................. 29 8.1 Viewing your own number .................................................................................... 27 8.2 Redial ................................................................................................................... 29 8.3 Hook Switch ........................................................................................................... 27 8.4 Flash .................................................................................................................... 29 8.5 Safe mode............................................................................................................ 29 9. Storing Phone Number .................................................................................................... 28 9.1 Storing/Editing Phone Numbers........................................................................... 30 9.1.1 Storing Phone Numbers ............................................................................. 30 9.1.2 Erasing Stored Phone Numbers ................................................................ 31 9.2 Finding Stored Phone Numbers........................................................................... 32 10. Speaker phone .............................................................................................................. 32 11. General Information ....................................................................................................... 33 Highlights Congratulations on your purchase of the LSP-340 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features. The telephone provides: 3-line LCD Display with status indicator A choice of 10 ring sounds A menu driven interface with prompts for easy operation Last Number Redial Speed Dialing with a 99-number memory Dial tone ROH (Receiver Off-Hook) tone Adjustable Ring Volume Internal Back-up Battery Pack AC Power Supply LGE CDMA Fixed Wireless Telephone LSP-340 Dipole Antenna DB9 Data Port for service and repair Backlingt Speaker phone FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 2.1 cm. from the body. To maintain compliance with FCC RF exposure requirements, maintain a 2.1 cm. separation distance between the user’s body and the phone, including the antenna. For more information about RF exposure, please visit the FCC website at www.fcc.gov LGE CDMA Fixed Wireless Telephone LSP-340 1. Important Information 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. IMPORTANT Before installing or operating this product read this information. 1.2 Optimal Phone Performance Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed. For the best call quality, keep the antenna free from obstructions and point the antenna straight up. Do not use the unit with a damaged antenna. Have your antenna replaced by a qualified technician immediately. Use only a manufacturer-approved antenna. Non-approved antennas, modifications, or attachments could impair call quality, damage the phone. RF energy may affect improperly installed or inadequately shielded personal medical devices such as pace markers, hospital monitor. Consult the manufacturer of any personal medical devices to determine if they are adequately shielded from external RF energy. Turn your terminal OFF in health care facilities when any regulations posted in the areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the distance between the radio or television and the telephone. - Connect the equipment into an outlet on a circuit different from that to which the terminal is connected. - Consult you Authorized LGIC Dealer of an experienced radio/TV technician for help. Use only the battery, antenna and AC power supply provided by LGIC. Using any other type will invalidate the warranty. Only authorized personnel should service the phone and its accessories. Faulty installation or service any be dangerous and may invalidate the warranty. Do not use the unit in designated “no cellular phone use” area. Avoid exposure to high temperature or humidity. Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service. Avoid shock or impact. LGE CDMA Fixed Wireless Telephone LSP-340 We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.3 Care and Service Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance. If any of the following conditions exist; unplug the unit at the wall plug, remove battery, and call the service provider. - The power supply cord is damaged or frayed. - Liquid has been spilled into the unit. - The unit has been exposed to rain or water. - The unit has been dropped or damaged. - The unit does not work normally by following the operating instructions. LGE CDMA Fixed Wireless Telephone LSP-340 2. Introduction 2.1 Front View of the Telephone ※ Function Key ① Menu / Softkey 1 Activate MENU state (also MENU state in the call state) ② Message : Activate SMS state ③ End : Deactivate a STATE – No store a value (also activate MUTE state ) ④ Recall / Softkey 2 : Activate RECALL state / Choose NEXT state ⑤ Clear(Cancel) : Delete the last digit/dial number(also Exit without storing in the MENU state) ⑥ Redial /Flash : Redial function, flash function in the call state ⑦ Navigation Left ( ) : Volume-(also Function as a cursor th the EDIT state) ⑧ Navigation Right ( ):Volume+(also Function as a cursor th the EDIT state) ⑦ SPKR :speaker phone 10 LGE CDMA Fixed Wireless Telephone LSP-340 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. 1) RSSI indicator : Indicates the signal strength in the service area. 2) 3) No service : The phone is not receiving system signal. In use : Displayed when call is in progress or the phone is in off-hook and dial tone heard. : No service : In use 4) Text message : Displayed when a text message is received. 5) Voice message : Displayed when a voice message is received. 6) Alarm : Displayed when wake up alarm time was setting. 7) Caller ID : Displayed when caller ID is received. 8) OUT : Going out. 9) Battery charge level : Indicates charged battery level. 11 LGE CDMA Fixed Wireless Telephone LSP-340 12 LGE CDMA Fixed Wireless Telephone LSP-340 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components Fixed Wireless Terminal is supplied with the following standard unit and accessories; 1. LSP-340 Main Unit with Handset -1EA2. Dipole Antenna -1EA3. Backup Battery -1EA4. User Guide -1EA5. AC/DC Power Adapter -1EA6. Power Cord(Only SMPS Adapter) -1EAPlease make sure that these components are present before you begin the unit installation. And then compare the following figures and components. If components are missing or damage is found, contact the store where you purchased the unit immediately. STEP II. Place the Terminal Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious damage may result if the unit falls. Do not place the unit on, or within 1 meter of heaters or radiators. This unit is designed for desktop usage. Avoid direct exposure to the sun lights and damp area. Read the SAFETY INFORMATION located at the first part of this document before you place the terminal STEP III. Connect Components (See the figures in “Installation Steps”.) Connect the antenna to the TNC antenna connector located at the top side of the terminal. If you placed the terminal on the flat surface, bend the antenna up right. Connect curl cord of handset assembly to the RJ-11C port located at the left side of the terminal. Open the battery case, securely connect the battery cord, place the backup battery pack and close the case. Connect the AC/DC Adapter cable to the DC input port located at the topside of the terminal. -. If it is good, beep tone is heard. -. If it is not good(Booting is fail or beep tone is not heard), you have to connect the adapter or backup battery, again. Please follow the below to get better voice quality; 1. Keep away from electrical appliances such as TV, computer, radio and so on. 2. Keep terminal in a high and central location with no obstructions, such as metal walls. 3. Raise the integral antenna of terminal to get maximum strength of receive signal as shown figure at the next page. 13 LGE CDMA Fixed Wireless Telephone LSP-340 Handset Connector Antenna TNC Connector STEP IV. AC Power Supply Connector Check the LCD Display After you follow the installation instruction step I to step III, please check the LCD for normal operation. If you may not see status of service, please repeat the 5th instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system. ※ The adapter type(with power cord) may be different by country adaptation. 14 LGE CDMA Fixed Wireless Telephone LSP-340 2.4 Installation Steps Please follow the below procedure to install the unit properly. Connect Basehandset to the handset connector. Connect the antenna to the TNC connector (Turn right). Bend the antenna up right. Open the battery cover at the bottom of the unit. Insert back-up battery in the bottom of the unit. (give care to polarity) 15 Connect the AC power supply. LGE CDMA Fixed Wireless Telephone LSP-340 3. Basic Operation 3.1 Making a Call 1. Pick up the handset or press button. 2. Listen for dial tone 3. Enter the phone number with area code if needed. 1234567 4. Wait for the Auto Time-out. Calling... 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, replace the handset or press button. 3.2 Redialing Last Outgoing Number 1. Pick up the handset or press button. 2. Listen for dial tone. Press Redial button. The last number that you called will be re-dialed. Correcting dialing mistakes 1. Press Clear button shortly to erase the most recent digit. 2. Press and hold Clear button for at least one second. If the phone is locked, enter the Lock Code If the call did not go through, press the hook switch and dial again. Flashing / Hook Switch 1. While in the middle of a call, pressing the hook switch for less than 1 second will be treated as a flash. After 1 second, the call will be terminated. 2. Very briefly pressing the hook switch will be ignored. Battery icon is displayed only when the terminal is operating by battery without AC power. 16 LGE CDMA Fixed Wireless Telephone LSP-340 3.3 Receiving a Call 1. When bell rings, pick up the handset. Incoming Call! 2. Start conversation. 3. To disconnect the call, replace the handset. Time: 0:23 [MUTE] 3.4 Signal Strength The quality of calls depends on the signal strength in your area. The stronger the signal, the better the call quality. The signal strength icon indicates the current strength as a number of bars. You can see the antenna and bars according to the strength of received signal in the upperleft part. 3.5 08 May, Sat 10:23 AM MENU RECALL Missed Call Message If a call is received and not answered for user’s absence, You are informed that you have missed a call. The latest missed call time and number of missed call is displayed. Press [OK] to erase “Missed call” message. 17 Missed 10:51 OK 1 call AM LGE CDMA Fixed Wireless Telephone LSP-340 4. List of Menu State Main Menu Sub-Menu Setting Value 1. Select Volume 1. Ring Volume 2. Key Volume 3. Ear Volume 4 steps 4 steps +silent 4 steps 4. Ring Select 2. Additional 1. Key tone length 10 types normal/Long Enable/Disable 2 .Minute alert 3.Rx call mode Voice / Fax for next / Always Fax / Modem for next / Always modem 4.SIO baud rate 19200/38400/57600/115200 /230400 Default 4.1 Volume / Ring This menu allows you to adjust the various different volumes. 4.1.1 Ring Volume The received tone when you receive a call can be adjusted. From the MENU 1. Press [MENU] + 1(Volume/Ring)+ 1(Ring Volume) in on-hook state. 2. Press Volume button or [NEXT] to adjust ring volume. 3. Press [OK] MAIN MENU 1:Volume / Ring 2:Additional By the Volume button 1. Press Volume button to adjust ring volume in on-hook state 4.1.2 Key Volume The tone when you press a key can be adjusted. RING VOLUME OK NEXT 1. Press [MENU] + 1(Volume/Ring) + 2(Key Volume) in on-hook state. KEY VOLUME 2. Press Volume button or [NEXT] to adjust key volume. UOK 18 NEXT LGE CDMA Fixed Wireless Telephone LSP-340 3. Press [OK] 4.1.3 Ear Volume The voice of the other party can be adjusted in on-hook state. 1. 2. Press [MENU] + 1(Volume/Ring) + 3(Ear Volume) in on-hook state. Press Volume button or [NEXT] to adjust ear piece volume EAR VOLUME OK NEXT 3. Press [OK] Press Volume button to adjust volume during conversation 4.1.4 Ring Select You can select the various ring types 1. Press [MENU] + 1(Volume/Ring) + 4(Ring Type) RINGER TYPE in on-hook state. 2. Select a desired ring type with Volume button or [NEXT]. Standard OK NEXT There are 10 different ring types. Those are Standard,Option 1,Option 2, Option 3, Option 4, Habanera, Deutsch song, La Primavera, Oh! susanna, Beethoven 3. Press [OK] to save and exit. 4.2 Additional feature 4.2.1 Key-tone Length Setting key beep playback length. Possible settings are Normal and Long. 1. Press [MENU] + 2(ADDITIONAL) + 2(Keytone Length) in on – hook State. 2. Select Normal or Long by [NEXT] or Volume button and press [OK] to select. ADDITIONAL 2:KeyTone Length KEY TONE LENGTH OK 19 normal NEXT LGE CDMA Fixed Wireless Telephone LSP-340 4.2.2 Minute Alert Alerts you every minute during a call. 1. Press [MENU] + 2(ADDITIONAL) + 3(Minute Alert) MINUTE ALERT In on – hook State 2. Select On or Off by [NEXT] or Volume button. OK On NEXT 3. Press [OK] to save and exit 4.2.3 Set Rx call mode 1. Press [MENU] + 2(ADDITIONAL) + 4(RX Call Mode) in on – hook RX CALL MODE State. 2. Select Voice, Fax for next, Always Fax, Modem for next by Volume or [NEXT] button. OK voice NEXT 3. Press [OK] to save and exit. 4.2.4 SIO baud rate 1. Press [MENU] + 2(ADDITIONALl) + 5(SIO Baud Rate) in on – hook DATA BAUDRATE State. 2. Select 19200, 38400, 57600, 115200, 230400 by OK Volume or [NEXT] button 3. Press [OK] to save and exit 20 19200 NEXT LGE CDMA Fixed Wireless Telephone LSP-340 5. Functions while in a call 5.1 Mute This function prevents your voice from being transmitted but you can call still hear other side. Time: 1. Press [MUTE] button while in a call. 0:23 1234567 MUTE] 2. You could see “MUTE” message blinking on the right side of the LCD 3. To release Mute, Press [UNMUTE] button. Time: MUTE 0:23 1234567 [UNMUTE] 5.2 Ear Volume You may adjust ear volume while you are in a call. Time: 0:23 1234567 MUTE] MENU The Volume button on the right side of the phone can be used to adjust ear volume. EAR VOLUME [ OK ] [ NEXT ] 6. Searching, Editing & Dialing 6.1 Retrieving Phone Number by Name 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 1 button to retrieve phone number by name. 3. Enter the name that you want to look for and press [FIND]. At least two letters are recommended for quick search. 21 FROM MEMORIES 1:By Name 2:By Address Lookup name? ABC FIND LGE CDMA Fixed Wireless Telephone LSP-340 Press [NEXT] or UP and DOWN button to scroll through the list of matches. 01:ADG 02:ACG VIEW ERASE 4. Press [VIEW] to see information in that location. Pick up handset to make a call. You can edit the phone number by pressing [EDIT] button. 6.2 01:ADG EDIT 028503619 ERASE Retrieving Phone Number by Address 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 2 button to retrieve a phone number by address. 3. Enter a memory address to retrieve phone number. (ex: If you enter a memory address, 01.) If there is no stored phone number in the memory location, “Empty Location” is displayed. If you press [FIND] button without entering number, you see the whole phone number list in the memory Location and you can find the number by scrolling the list. Lookup Location? ?? FIND 01:ADG 02:ACG VIEW ERASE 4. Pick up the handset or press button to call to displayed number, press [EDIT] to edit stored information or press [ERASE] to delete displayed information. Edit process Modify the phone number by Clear button and keypad. And Press [OK] to edit a related name. 01:ADG 1) Delete the phone number by Clear button. EDIT 2) Enter the modified phone number. 028503619 ERASE 3) Press [OK]. 4) To move cursor, use Volume button or *, #. 5) Enter the name. 6) Press [OK]. Enter a new memory address to store a new information or choose the new memory address by [NEXT] and press [OK]. Press [OK] to no secret. OK 22 028503619 QUIT LGE CDMA Fixed Wireless Telephone LSP-340 Erasing process You might press [ERASE] at the above step 3. Press [OK] to complete erasing process. ERASE ? OK #02 NO NEXT 6.3 Retrieving Phone Number by NUMBER 1. Press [RECALL] and 2(FROM MEMEORIES). 2. Press 3 button to retrieve a phone number by number. Lookup Number? ?? 3. Enter the phone number that you want to find and press FIND [FIND] button. If there is no stored phone number in the memory location, “No number matches” is displayed. 4. Pick up the handset or press button to call to displayed number, press [EDIT] to [ERASE] edit stored information or press to delete displayed information. Edit process. Erasing process Do the above step of 6.2.2. 01:ADG 02:ACG VIEW ERASE 6.4 Fast Searching . 1. Press [RECALL] button RECALL 1:FROM MEMORIES 2:Clear Memory 2.Press [RECALL] button again. you see the whole phone number list in the memory Location and you can find the number by scrolling the list. 01:ADG 02:ACG VIEW ERASE 6.5 Clear Memory When you want to delete phonebook memory, you can erase all phonebook memory. 1. Press [RECALL] button CLEAR WHOLE BOOK 2. Press 2(Clear Memory). 3. Press [YES] to erase all phone memory. OK 23 No NEXT LGE CDMA Fixed Wireless Telephone LSP-340 7.SMS (Short Message Service) Messaging, Paging, and Voice mail features are available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen or to send a message. Check with your WLL service provider regarding the availability of this feature. The information in a message depends on the mode the WLL is operating in and the service’s capabilities. 7.1 Checking & Deleting Received Message 7.1.1 Text Message 1. Press MESSAGE button and 1(MSG RECEIVED) 2. Press 1(Text MSG) to see a received text message list. Locate to the desired message in the list. Mark “∨ “means already a checked message. 3. Press [VIEW] to see the content of desired message. You can see the message with received time and caller’s phone number. SMS MENU 1:MSG Received 2:MSG Sending RECEIVED MSG 1:Message 2:Voice Mail 01 Hello 02 Good Morning VIEW [ERASE] You can read a l message. 4. Press [ERASE] to erase a message. Press [OK] to complete erasing process. 5/21 2:20 PM < PAGE from > 333333 [ERASE] OK 333333 Hello! [OK] ERASE ? OK 24 [ERASE] No [ NEXT ] LGE CDMA Fixed Wireless Telephone LSP-340 7.1.2 Voice Message Voice mail notifications indicate the number of new voice mail message in your mail box. Only the most recent voice mail notification will be stored in the WLL phone; previous messages will be overwritten. When a voice mail messages left for you, the WLL phone will alert and display “ * Voice Mail * “. You must call your voice mail service to retrieve these messages. 5/21 2:32 PM * VOICE MAIL * 1. Press MESSAGE button and 1(Received MSG) in idle state. 2. Press 2(Voice MSG) to check the voice message. If there is no voice message, “No Voice Mail was received” is displayed. Press [ERASE] to delete the voice message. 1 < DUPLICATED > 7.1.3 Erasing all Received Message [OK] [ERASE] 1. Press MESSAGE button and 1(MSG RECEIVED). 2. Press 3(Clear All). MSG RECEIVED 3:Clear All 3. Press [OK] to delete. ERASE All? Yes [OK] 7.2 [NEXT] MSG Notification tone select 1. Press Message button and 3(MSG NOTIF). 2. Select off, once, Every 2 Min by pressing [NEXT] or Volume button. MSG NOTIF . 3. Press [OK] to save and exit. [OK] 25 Off [NEXT] LGE CDMA Fixed Wireless Telephone LSP-340 7.3 Message Sending 7.3.1 Sending a New Message 1. Press MESSAGE button and 2(MSG SENDING) SMS MENU 1:MSG Received 2:MSG Sending 2. Press 1(New Message) to send a new message MSG SENDING 1:New Message 2:Sent Message 3. Enter the called number and press [OK] You can find the called number in the memory by Called Number [FIND] button OK 1234 [FIND] 4. Enter the call back number and press [OK] Call back Number 5678 OK 5. Input a message and press [OK] to send Press [A BC] to change upper or lower case character028503333 abcde ok A/a ABC OK 6. Select Yes/No to store the message. Press [OK] to send Store Message ? OK 26 Yes NEXT LGE CDMA Fixed Wireless Telephone LSP-340 7.3.2 Sending the sent Message or message after editing the Sent Message 1. Press MESSAGE button and 2(MSG SENDING) 2.Press 2(Sent Message) to see a received text message list. Locate to the desired message in the list. MSG Sending 1:New MSG 2:Sent MSG 3. Press [EDIT] to edit the content of the selected message. You can see the selected sent message 01 Hello 02 Good Morning EDIT ERASE Edit the message. Press [ABC] to change upper or lower case character Hello! ok OK 5. Press [OK] Button. 6. Enter the called Number and press [OK] 028503333 A/a ABC Called Number OK 1234 [RECALL] 7. Enter the call back Number and press [OK] Call back Number 5678 OK 8. Select Yes/No to store Message. Press [OK] to send the MSG Store Message? OK 27 Yes NEXT LGE CDMA Fixed Wireless Telephone LSP-340 7.3.3 Erasing a Sent Message 1. Press MESSAGE button and 2(MSG SENDING) MSG Sending 1:New Message 2:Sent Message 2. Press 3(Clear All) to clear text message list. MSG SENDING 3:Clear All ERASE ALL ? 3. Press [OK] to erase a message. OK 28 Yes [NEXT] LGE CDMA Fixed Wireless Telephone LSP-340 8.Beside Functions 8.1Viewing your own number Press Redial button in on-hook state to see your own telephone number 8.2 000-000-0000 OK Redial Pick up the handset or press button to redial last outgoing number. OWN NUMBER button and Redial 8.3 Hook Switch 1. 2. 8.4 While in the middle of a call, pressing the hook switch for 300ms(600~300ms) will be treated as a flash. After 1 second, the call will be terminated. Very briefly pressing the hook switch will be ignored. Flash The same as that of a single line phone 8.5 Safe mode Even if you misplaced the handset for long, The phone LSP-340 returns to the normal state. After the ROH tone, The phone returns to the IDLE state as the picture and the phone is able to recive a call. 29 MENU [RECALL] LGE CDMA Fixed Wireless Telephone LSP-340 9. Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.1 Storing Phone Numbers Frequently used phone numbers can be stored on the memory locations (01~99: 2 digits) and you can make a call by pressing memory location number in off-hook state. 1. Enter the area code and phone number in on-hook state. (Max. 32 digits) 2. Press [SAVE]. SAVE 021234567 FIND OK 021234567 ABC 3. Enter the name in text mode and press [OK] to save. Press [ABC] to change upper or lower case characters. To store without name, just press [OK]. Refer to “To enter a character”. 4. Enter the desired memory location. The phone number is stored in the displayed memory location. ABC Auto=01 OK 5. The phone will display a message asking to keep your number as secret or not. Select “No” or “Yes” using [NEXT]. Then Press [OK]. ?? NEXT Make it Secret? No OK NEXT You can see a confirming message. ABC As stored! in Also you can see a condition of used memory. - MEMORY used : 01 empty : 99 30 01 LGE CDMA Fixed Wireless Telephone LSP-340 To enter a character. You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character. To enter English character. Press once a keypad to enter the first letter labeled in the keypad, twice to enter the second letter and 3 times to enter the third letter. EX) To enter “L”, Press dial button 5 labeled “JKL” 3 times to enter “L”. After 2 seconds entering a character, the cursor is moved to the next position automatically. Press Volume button to move the cursor. Press Clear button to erase or correct entered character. To enter specific character, Press Message to view a desired character while you are entering names. Special characters includes *, #, %, “, :, +, <, >, =, and more Press the number next to the character you want insert. 9.1.2 Erasing Stored Phone Numbers When a phone number is stored in a memory location, you can erase the stored phone number. 1. Press [RECALL] + 1(FROM MEMORIES) + 3(By Number) and enter a number of the desired memory location to erase. Lookup Number? FIND If there is no stored phone number in the memory location, “Empty Location” is displayed. 01:ADG 02:ACG VIEW ERASE If you do not remember the memory location to erase, press [FIND] to search phone number by memory location 2. Erasing process 31 LGE CDMA Fixed Wireless Telephone LSP-340 Press [ERASE] to delete. Erase? OK #01 Yes NEXT Press [OK] to complete erasing process. - ERASED - 9.2 Finding Stored Phone Numbers You can see all the list of stored phone numbers in memory list and if you forgot the memory location, can find it in sequence. And You can place a call with the phone number. 1. Press [RECALL] + 1(FROM MEMEORIES) +3(By Number) in on-hook state. Lookup Number? ?? FIND 2. Press [FIND] button to find the desired phone number. Locate in the desired name or address to find. If not any entered name, phone number is displayed. 01:ADG 02:ACG VIEW ERASE 3. Press [VIEW] to see the stored number. 4. To make a call with the phone number in the state of step 2 or step 3, pick up the handset or press button and wait for Auto Time-out. 01:ADG EDIT 028503619 ERASE 10. Speaker phone This function is a convenient feature which enables you to call using speaker phone 32 LGE CDMA Fixed Wireless Telephone LSP-340 button in on-hook state. 11. General Information Main Unit Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature LSP-340 Digital : 824 ~ 849 MHz Digital : 869 ~ 894 MHz 1.25 MHz Digital : Max. 0.31W -104 ~ -25dBm 215 X 160 X 84 ( W X LX H) Below 833(with battery, Ni-MH) Below 749 (without battery) 0 ~ 55℃ AC/DC Adapter Item Input Voltage Input Frequency Output Voltage SMPS Type Description AC 100 ~ 250V / 0.3A, 15W 50 / 60Hz 9.6V(DC), 1A Battery Item Capacity Talk duration time Standby duration time Charging duration time Description 3.6V Ni-MH 1700mAh 2 Hours 24Hours Trickle, 24 Hours Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No. 5,107,225 33
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2001:12:07 22:12:24Z Modify Date : 2001:12:12 17:35:08-05:00 Page Count : 33 Creation Date : 2001:12:07 22:12:24Z Mod Date : 2001:12:12 17:35:08-05:00 Producer : Acrobat Distiller 5.0 (Windows) Author : Joel Metadata Date : 2001:12:12 17:35:08-05:00 Creator : Joel Title : Microsoft Word - LSP340_USERMENUAL.docEXIF Metadata provided by EXIF.tools