LG Electronics USA PF80AJE DLP PROJECTOR User Manual G User s manual
LG Electronics USA DLP PROJECTOR G User s manual
Contents
User Manaul Part 1
Order Number : GETEC-C1-14-182 FCC Part 15 subpart B Test Report Number : GETEC-E3-14-040 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: DLP Projector FCC ID.: BEJPF80AJE Owner's Manual DLP PROJECTOR Please read the safety information carefully before using the product. PF80A 2 LICENSE LICENSE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx. com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. NOTE yyImage shown may differ from your projector. yyYour projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. ING/CAUTION ELECTRIC SHOCK O NOT OPEN SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. yySafety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product. yyRead the owner's manual carefully and keep it to hand. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION The lightning flash with RISK OF ELECTRIC SHOCK arrowhead symbol, within DO NOT OPEN an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 4 SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Indoor Installation WARNING yyDo not use the projector outside and do not expose the product to any humidity or water. - Since the product is not waterproof, this may result in a fire or electric shock. yyDo not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. - This may result in fire. yyDo not place flammable materials such as aerosols near the projector. - This may result in fire. yyDo not allow children to cling to or climb up to the projector. - This may cause the projector to fall, causing injury or death. yyDo not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. - This may result in fire due to the increase in internal temperature. yyDo not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. - Failure to do so may result in fire, electric shock, or corrosion. yyDo not install the product onto a wall or ceiling that is close to sources of oil or oil mist. - The product may be damaged and fall, resulting in serious injury. yyDo not place the projector where it might be exposed to dust. - This may result in fire. yyDo not use the projector in a damp place such as a bathroom where it is likely to get wet. - This may result in fire or electric shock. yyDo not allow a tablecloth or curtain to block the air vent. - This may result in fire due to the increase in the internal temperature. yyEnsure good ventilation around the projector. The distance between the projector and the wall should be at least 30 cm. - This will prevent fire due to the increase in the internal temperature. CAUTION yyWhen placing the projector on a table or shelf, be careful not to put it near the edge. - ������������������������������������ The ������������������������������������� projector could fall due to balance problems, which may cause personal injury or damage to the product. Make sure to use the projector cabinet or stand that fits the projector. yyWhen moving the projector, make sure to switch it off and remove the power plug and cords. - The power cord may be damaged, resulting in fire or electric shock. yyDo not place the projector on an unstable or vibrating surface such as a wobbly shelf or a slope. - It may fall and cause injury. SAFETY INSTRUCTIONS yyBe careful not to tip the projector over when connecting external devices to the projector. - This may cause personal injury or damage to the projector. Power WARNING yyThe grounding wire should be connected. - Ensure that you connect the grounding cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker. Do not try to ground the projector by connecting it to telephone wires, lightning rods or gas pipes. yyThe power plug should be inserted fully into the power outlet. - An unstable connection may cause a fire. yyDo not place heavy objects on the power cord. - This may result in fire or electric shock. yyNever touch the power plug with wet hands. - This may result in electric shock. yyDo not plug too many devices into one multi-power outlet. - This may result in fire due to the power outlet overheating. yyPrevent dust from collecting on the power plug pins or outlet. - This may result in fire. yyTo turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation. CAUTION yyHold the plug firmly when unplugging. - A damaged wire may create a fire hazard. yyEnsure the power cord and plug are not damaged, modified, severely bent, twisted, pulled, sandwiched or hot. Do not use the product if the power outlet is loose. - This may result in fire or electric shock. yyKeep the power cord away from heating devices. - The wire's sheath may melt, which may result in fire or electric shock. yyPlace the projector where people will not trip over or tread on the power cord to protect the power cord and plug from any damage. - This may result in fire or electric shock. yyDo not turn the projector on or off by plugging in the power plug or unplugging it from the power outlet. (Do not use the power plug as a switch.) - This may result in electric shock or damage to the product. yyDo not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. - This may result in electric shock. yyUse only the official power cord which is provided by your dealer. Do not use other power cords. - This may result in fire or electric shock. 6 SAFETY INSTRUCTIONS When in Use WARNING yyDo not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles, etc. - This may result in fire or electric shock, or cause injury due to falling. yyIn the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. - This may result in electric shock. yyDo not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector. - This is to prevent electric shock or fire. yyIn the event that liquid or a foreign object falls into the projector, switch it off and unplug it from the power outlet and contact our service center. - This may result in fire or electric shock. yyMake sure that a child does not swallow the batteries when you replace the old remote control batteries with new ones. Keep batteries out of reach of children. - If a child swallows a battery, consult a doctor immediately. yyNever open any cover on the projector. - There is a high risk of electric shock. yyDo not look directly into the lens when the projector is in use. - The bright light may damage your eyes. yyWhen the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot. yyIf there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. - Sparks may cause fire or burns. yyUnplug the power cord from the outlet during a lightning storm. - This will prevent shock or damage to the projector. yyDo not use the projector near electronic devices that generate a strong magnetic field. yyDo not put the plastic package used to pack the projector around your head. - This may cause suffocation. yyDo not keep your hand on the projector for a long time when it is running. yyWhen you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. -M ake sure that the connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product. yyDo not place the projector or its remote control with battery in an extremely high temperature environment. - This may result in fire. SAFETY INSTRUCTIONS CAUTION yyDo not place heavy objects on the projector. - It may fall down and cause personal injury. yyBe careful not to allow any impact to the lens during transport. yyDo not touch the lens of the projector. - The lens may be damaged. yyDo not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. yyIn the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the power outlet and contact our service center. - This may result in fire or electric shock. yyDo not drop anything onto the projector or allow anything to bang into the projector. - This may cause damage to the projector or personal injury. yyIt is recommended that you maintain a distance of more than 5 - 7 times the diagonal length of the screen. - If you watch the screen at a close distance for a long time, your eye sight may become worse. yyDo not block the light beam emitted from the projector using a book or other object. - Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power. yyDo not start the projector with the volume turned up high. - High volume may damage hearing. Cleaning WARNING yyDo not spray the projector with water when cleaning. Make sure water does not flow into the projector. - This may result in fire or electric shock. yyWhen there is smoke or a strange smell coming out from the projector or a foreign object falls into the pro jector, please switch it off and unplug it from the power outlet and contact our service center. - Otherwise, this may result in fire or electric shock. yyUse air spray, a soft cloth or a cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. CAUTION yyContact your seller or our service center once a year to clean the internal parts of the projector. - If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector. yyWhen cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial shiner, abrasives, wax, benzene, or alcohol as these can damage the projector. - This can result in fire, electric shock or cause damage to the product (deformation and corrosion).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2014:04:28 08:33:50-07:00 Create Date : 2014:04:28 08:33:42-07:00 Metadata Date : 2014:04:28 08:33:50-07:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - G_User_s manual Creator : seungchul-lee Document ID : uuid:c5f1fd36-1b0d-4f40-96d1-aab69d6c2919 Instance ID : uuid:befd8f0e-28e8-47a7-a5ca-e8c7dd06c2a4 Producer : Acrobat Distiller 9.5.5 (Windows) Has XFA : No Page Count : 8 Author : seungchul-leeEXIF Metadata provided by EXIF.tools