LG Electronics USA PF80AJE DLP PROJECTOR User Manual G User s manual

LG Electronics USA DLP PROJECTOR G User s manual

UserManual.wiki >

LG Electronics USA >

PF80AJE User Manual >

User Manaul Part 1

Contents

User Manaul Part 1

Order Number : GETEC-C1-14-182 FCC Part 15 subpart B Test Report Number : GETEC-E3-14-040 Page 1 / 1 EUT Type: DLP Projector FCC ID.: BEJPF80AJE APPENDIX G : USER’S MANUAL

Owner's ManualDLP PROJECTORPF80APlease read the safety information carefully before using the product.

3SAFETY INSTRUCTIONS SAFETY INSTRUCTIONSPlease take note of the safety instructions to prevent any potential accident or misuse of the projector. ySafety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product. yRead the owner's manual carefully and keep it to hand.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.WARNING/CAUTION- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

4SAFETY INSTRUCTIONS Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Indoor Installation WARNING yDo not use the projector outside and do not expose the product to any humidity or water. - Since the product is not waterproof, this may result in a fire or electric shock. yDo not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc.- This may result in fire. yDo not place flammable materials such as aerosols near the projector. - This may result in fire. yDo not allow children to cling to or climb up to the projector. - This may cause the projector to fall, causing injury or death. yDo not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion.- This may result in fire due to the increase in internal temperature. yDo not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. - Failure to do so may result in fire, electric shock, or corrosion. yDo not install the product onto a wall or ceiling that is close to sources of oil or oil mist. - The product may be damaged and fall, resulting in serious injury. yDo not place the projector where it might be exposed to dust. - This may result in fire. yDo not use the projector in a damp place such as a bathroom where it is likely to get wet. - This may result in fire or electric shock. yDo not allow a tablecloth or curtain to block the air vent. - This may result in fire due to the increase in the internal temperature. yEnsure good ventilation around the projector. The distance between the projector and the wall should be at least 30 cm.- This will prevent fire due to the increase in the internal temperature. CAUTION yWhen placing the projector on a table or shelf, be careful not to put it near the edge. - The projector could fall due to bal- The projector could fall due to bal-The projector could fall due to bal-ance problems, which may cause personal injury or damage to the product. Make sure to use the pro-jector cabinet or stand that fits the projector. yWhen moving the projector, make sure to switch it off and remove the power plug and cords. - The power cord may be damaged, resulting in fire or electric shock. yDo not place the projector on an unstable or vibrating surface such as a wobbly shelf or a slope. - It may fall and cause injury.

5SAFETY INSTRUCTIONS yBe careful not to tip the projector over when connecting external devices to the projector. - This may cause personal injury or damage to the projector.Power WARNING yThe grounding wire should be con-nected. - Ensure that you connect the ground-ing cable to avoid electric shock. If it is not possible to ground the unit, have a qualied electrician install a separate circuit breaker. Do not try to ground the projector by connecting it to telephone wires, lightning rods or gas pipes. yThe power plug should be inserted fully into the power outlet. - An unstable connection may cause a fire. yDo not place heavy objects on the power cord. - This may result in fire or electric shock. yNever touch the power plug with wet hands. - This may result in electric shock. yDo not plug too many devices into one multi-power outlet. - This may result in fire due to the power outlet overheating. yPrevent dust from collecting on the power plug pins or outlet. - This may result in fire. yTo turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation. CAUTION yHold the plug firmly when unplugging. - A damaged wire may create a fire hazard. yEnsure the power cord and plug are not damaged, modified, severely bent, twisted, pulled, sandwiched or hot. Do not use the product if the power outlet is loose. - This may result in fire or electric shock. yKeep the power cord away from heating devices. - The wire's sheath may melt, which may result in fire or electric shock. yPlace the projector where people will not trip over or tread on the power cord to protect the power cord and plug from any damage. - This may result in fire or electric shock. yDo not turn the projector on or off by plugging in the power plug or unplug-ging it from the power outlet. (Do not use the power plug as a switch.)- This may result in electric shock or damage to the product. yDo not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. - This may result in electric shock. yUse only the official power cord which is provided by your dealer. Do not use other power cords. - This may result in fire or electric shock.

6SAFETY INSTRUCTIONS When in Use WARNING yDo not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles, etc. - This may result in fire or electric shock, or cause injury due to falling. yIn the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized ser-vice center.- This may result in electric shock. yDo not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector. - This is to prevent electric shock or fire. yIn the event that liquid or a foreign object falls into the projector, switch it off and unplug it from the power outlet and contact our service center. - This may result in fire or electric shock. yMake sure that a child does not swal-low the batteries when you replace the old remote control batteries with new ones. Keep batteries out of reach of children. - If a child swallows a battery, consult a doctor immediately. yNever open any cover on the projector. - There is a high risk of electric shock. yDo not look directly into the lens when the projector is in use. - The bright light may damage your eyes. yWhen the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot. yIf there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. - Sparks may cause fire or burns. yUnplug the power cord from the outlet during a lightning storm. - This will prevent shock or damage to the projector. yDo not use the projector near electronic devices that generate a strong magnetic field. yDo not put the plastic package used to pack the projector around your head. - This may cause suffocation. yDo not keep your hand on the projector for a long time when it is running. yWhen you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. - Make sure that the connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product. yDo not place the projector or its remote control with battery in an extremely high temperature environment. - This may result in fire.

7SAFETY INSTRUCTIONS CAUTION yDo not place heavy objects on the projector. - It may fall down and cause personal injury. yBe careful not to allow any impact to the lens during transport. yDo not touch the lens of the projector. - The lens may be damaged. yDo not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. yIn the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the power out-let and contact our service center.- This may result in fire or electric shock. yDo not drop anything onto the projector or allow anything to bang into the projector. - This may cause damage to the projector or personal injury. yIt is recommended that you maintain a distance of more than 5 - 7 times the diagonal length of the screen. - If you watch the screen at a close distance for a long time, your eye sight may become worse. yDo not block the light beam emitted from the projector using a book or other object. - Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power. yDo not start the projector with the volume turned up high. - High volume may damage hearing.Cleaning WARNING yDo not spray the projector with water when cleaning. Make sure water does not flow into the projector.- This may result in fire or electric shock. yWhen there is smoke or a strange smell coming out from the projector or a foreign object falls into the pro-jector, please switch it off and unplug it from the power outlet and contact our service center. - Otherwise, this may result in fire or electric shock. yUse air spray, a soft cloth or a cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. CAUTION yContact your seller or our service center once a year to clean the inter-nal parts of the projector. - If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector. yWhen cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, auto-mobile or industrial shiner, abrasives, wax, benzene, or alcohol as these can damage the projector. - This can result in fire, electric shock or cause damage to the product (deformation and corrosion).