LG Electronics USA SP700 Slim Remote User Manual

LG Electronics USA Slim Remote

User Manual

Magic Remote User InformationModel Name : AN-SP700
Table of Contents1. Overview and specification of the remote control(1) Overview(2) Specification2. Precautions3. Customer SupportEnglish
1. Overview and Specifications for the Remote Control(1) Overview- Instructions for using the Magic Remote control are in the TV manual. this remote uses RF(Radio Frequency) instead of IR (InfaRed light).this remote will operate within 10m of the tv and doesnot require it be pointed at the tv.(2) SpecificationsCategories DetailsModel No. AN-SP700Range of frequency 2.400 GHz ~ 2.4835 GHzChannel 40 channelsReception sensitivity -93 dBmDimensions Width 43.1 x Thickness 12.1 x Length 142.1 (tolerance of ±1 mm) Weight 51.2g ±5 g (excluding battery)Power source CR2032 3.0V, 2 Lithium coin batteryOperational temperature range 0 ℃~ 60 ℃
2. Precautions(1) After replacement of the battery, use the remote control following pairing in accordance with user manual.(2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the user manual.(3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit. (4) Do not dismantle or exert heat to the battery.(5) Do not drop battery or exert extreme impact that may even cause the case to be damaged. (6) Do not immerse the battery in water.(7) There is danger of explosion if a the battery is inserted reversely.(8) Properly dispose of used batteries.3. Customer SupportRefer to the contact number for services provided in the TV Manual.
Table des matières1. Aperçu et spécifications de la télécommande(1) Aperçu(2) Spécifications2. Précautions3. Support clientFrenchFrançais
1. Aperçu et spécifications de la télécommande(1) Aperçu Les instructions d'utilisation de la télécommande Magic Remote se trouvent dans le manuel de la TV.Cette télécommande vous permet de contrôler votre téléviseur en l'utilisant comme une souris sans fil. Avec cette télécommande qui utilise la radiofréquence 2.4Ghz, contrôlez votre écran jusqu'à une portée de 10m(2) SpécificationsCatégorie ContenuNom de modèle AN-SP700Zone de fréquences 2.400 GHz ~ 2.4835 GHzChaîne 40 chaînesRéceptivité -93 dBmDimensions (mm) 43.1 (L) x 12.1 (L) x 142.1 (E) (tolérances ±1)Poids (g) 51.2g±5 (non incluant les piles)Secteur CR2032 3.0V, 2 piles bouton au lithiumTempérature pour le fonctionnement 0 °C à 60 °C
2. Précautions(1) Après avoir changé de batterie, procédez à la synchronisation de la télécommande en suivant le mode d'emploi.(2) Si la télécommande ne fonctionne pas, même après avoir changé les piles,essayez à nouveau en suivant les instructions du mode d’emploi.(3) En cas de non utilisation de la télécommande pendant une longue période, il vaut mieux enlever la batterie.(4) Ne pas laisser les piles près d'une source de chaleur(5) Ne faîtes pas subir de chocs à la télécommande, cela pourraitendommager son boitier et son fonctionnement.(6) Ne pas mettre les piles dans de l'eau(7) vous introduisez les piles à l'envers il y a un risque de déterioration ou d'explosion(8) Les piles usées doivent être jetées dans un endroit adapté 3. Support clientVeuillez consulter les coordonnées du service affichées dans le manuel de la télévision.
※ Regulation (1) KCC Statement(한국)“제작자 및 설치자는 해당 무선설비가 전파혼신 가능성이 있으므로인명안전과 관련된 서비스는 할 수 없음“(2) NCC Statement(Taiwan)根據根據根據根據NCC功機管功機管功機管功機管 規規規規1) 經格功機, 經可, 公 均得更 加大功更 計及功能2) 功機得干 : 經干, 󰀽, 改干得繼, 規功機工科及機干(3) ANATEL Statement (Para Brazil) Este equipamento opera em caráter secundário, isto é, não tem direito àproteção contra interferência prejudicial, mesmo de estações do mesmotipo e não pode causar interferência a sistemas operando em caráter primário.
(4) Federal Communications Commission(FCC) StatementYou are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-. Reorient or relocate the receiving antenna.-. Increase the separation between the equipment and receiver.-. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected-. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1) this device may not cause harmful interference, and2) this device must accept any interference received, including interference that may cause undesired operation of the device.
FCC CautionAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate thisequipment and For indoor use only, use outdoors or in other modes notcovered by this manual may violate the FCC regulation and violate theuser authority to use the product.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. End users must follow the specific operatinginstructions for satisfying RF exposure compliance.(5) Industry Canada(IC) StatementThis device complies with RSS-210 of the Industry Canada Rules.Operation is subject to the following two conditions:1) this device may not cause interference and2) this device must accept any interference. Including interference that may cause undesired operation of device.Avis d'Industrie CanadaCet appareil est conforme à norme CNR-210 des règlements d'Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes:1) Cet appareil ne doit pas provoquer d'interférences et2) Cet appareil doit accepter toute les interférences. y compris celles pouvant entraîner son dys- fonctionnement.
IC Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for anuncontrolled environment.NOTE: THE MANUFACTURERE IS NO T RESPONSIBLE FOR ANY RADIO ORTV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONSTO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TOOPERATE THE EQUIPMENT.Avis d'Industrie Canada sur I'exposition aux rayonnements Cet appareil est conforme aux limites d'exposition aux rayonnementsd'Industrie Canaca pour unenvironnement non contrôlé.REMARQUE: LE FABRICANT N'EST PAS RESPONSIBLE DES INTERFÉRENCESRADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NONAUTORISÉES APPORTÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIT ANNULER L'AUTORISATIONACCORDÉE À L'UTILISATEUR DE FAIRE FONCTIONNER L'APPAREIL.

Navigation menu